patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Kevin Traynor <ktraynor@redhat.com>
To: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
Cc: Hongbo Zheng <zhenghongbo3@huawei.com>,
	Chunsong Feng <fengchunsong@huawei.com>,
	Xuan Li <lixuan47@hisilicon.com>, dpdk stable <stable@dpdk.org>
Subject: [dpdk-stable] patch 'net/bonding: fix MAC address when one port resets' has been queued to LTS release 18.11.10
Date: Fri, 28 Aug 2020 11:12:32 +0100	[thread overview]
Message-ID: <20200828101308.223767-6-ktraynor@redhat.com> (raw)
In-Reply-To: <20200828101308.223767-1-ktraynor@redhat.com>

Hi,

FYI, your patch has been queued to LTS release 18.11.10

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 09/02/20. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable-queue

This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable-queue/commit/84c299a22d28f9e24afdb8d5f2ccea987b0f732e

Thanks.

Kevin.

---
From 84c299a22d28f9e24afdb8d5f2ccea987b0f732e Mon Sep 17 00:00:00 2001
From: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
Date: Fri, 17 Apr 2020 16:19:18 +0800
Subject: [PATCH] net/bonding: fix MAC address when one port resets

[ upstream commit 2d944002762e85e351be7cea432919f159d2ecae ]

The current bonding PMD driver call mac_address_slaves_update function
to modify the MAC address of all slaves devices. In
mac_address_slaves_update function, the rte_eth_dev_default_mac_addr_set
API function is called to set the MAC address of the slave devices in
turn in the for loop statement.

When one port reset, calling rte_eth_dev_default_mac_addr_set API fails
because the firmware will not respond to the commands from the driver,
and exit the loop, so other slave devices cannot continue to update the
MAC address.

This patch fixes the issue by avoid exiting the loop when calling
rte_eth_dev_default_mac_addr_set fails.

Fixes: 2efb58cbab6e ("bond: new link bonding library")

Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Xuan Li <lixuan47@hisilicon.com>
---
 drivers/net/bonding/rte_eth_bond_pmd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index d7fb9db0cc..8b410ff19b 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -1457,4 +1457,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
 {
 	struct bond_dev_private *internals = bonded_eth_dev->data->dev_private;
+	bool set;
 	int i;
 
@@ -1484,4 +1485,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
 	case BONDING_MODE_ALB:
 	default:
+		set = true;
 		for (i = 0; i < internals->slave_count; i++) {
 			if (internals->slaves[i].port_id ==
@@ -1492,5 +1494,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
 					RTE_BOND_LOG(ERR, "Failed to update port Id %d MAC address",
 							internals->current_primary_port);
-					return -1;
+					set = false;
 				}
 			} else {
@@ -1500,8 +1502,9 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
 					RTE_BOND_LOG(ERR, "Failed to update port Id %d MAC address",
 							internals->slaves[i].port_id);
-					return -1;
 				}
 			}
 		}
+		if (!set)
+			return -1;
 	}
 
-- 
2.26.2

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2020-08-28 11:03:26.116365555 +0100
+++ 0006-net-bonding-fix-MAC-address-when-one-port-resets.patch	2020-08-28 11:03:25.902955299 +0100
@@ -1 +1 @@
-From 2d944002762e85e351be7cea432919f159d2ecae Mon Sep 17 00:00:00 2001
+From 84c299a22d28f9e24afdb8d5f2ccea987b0f732e Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 2d944002762e85e351be7cea432919f159d2ecae ]
+
@@ -21 +22,0 @@
-Cc: stable@dpdk.org
@@ -32 +33 @@
-index 6f361c7b2c..116e2f29de 100644
+index d7fb9db0cc..8b410ff19b 100644
@@ -35 +36 @@
-@@ -1503,4 +1503,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
+@@ -1457,4 +1457,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
@@ -41 +42 @@
-@@ -1530,4 +1531,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
+@@ -1484,4 +1485,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
@@ -47 +48 @@
-@@ -1538,5 +1540,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
+@@ -1492,5 +1494,5 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
@@ -54 +55 @@
-@@ -1546,8 +1548,9 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
+@@ -1500,8 +1502,9 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)


  parent reply	other threads:[~2020-08-28 10:13 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-28 10:12 [dpdk-stable] patch 'net/bonding: fix error code on device creation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/af_packet: fix check of file descriptors' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/af_packet: fix memory leak on init failure' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/af_packet: fix munmap " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/bonding: fix MAC address when switching active port' " Kevin Traynor
2020-08-28 10:12 ` Kevin Traynor [this message]
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: fix flow director Rx writeback packet' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/ixgbe: fix MAC control frame forward' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/ixgbe: fix flow control status' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/bonding: delete redundant code' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: report VLAN filter capability' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/e1000: report VLAN extend " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/e1000: fix crash on Tx done clean up' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'vhost: fix double-free with zero-copy' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net: fix pedantic build' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'doc: fix some typos in Linux guide' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'doc: fix typo in bbdev test " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'bus/vdev: fix a typo in doxygen comment' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'hash: fix out-of-memory handling in hash creation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'test/cycles: restore default delay callback' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'event/dpaa: remove dead code' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'app/eventdev: fix capability check in pipeline ATQ test' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'event/dpaa2: add all-types queue capability flag' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'common/qat: fix uninitialized variable' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'crypto/armv8: remove debug option' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'crypto/armv8: use dedicated log type' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/mlx5: fix flow items size calculation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/mlx5: fix crash in NVGRE item translation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/mlx4: optimize stack memory size in probe' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: fix binding interrupt without MSI-X vector' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/i40e: fix flow director MSI-X resource allocation' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/qede: remove dead code' " Kevin Traynor
2020-08-28 10:12 ` [dpdk-stable] patch 'net/virtio-user: fix status management' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/virtio-user: check tap system call setting' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/kni: set packet input port in Rx' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'examples/packet_ordering: use proper exit method' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/netvsc: fix crash during Tx' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'doc: fix ethtool app path' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/bonding: fix dead loop on RSS RETA update' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'net/i40e: remove duplicate tunnel type check' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'kni: fix reference to master/slave process' " Kevin Traynor
2020-08-28 10:13 ` [dpdk-stable] patch 'doc: fix reference to master " Kevin Traynor

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200828101308.223767-6-ktraynor@redhat.com \
    --to=ktraynor@redhat.com \
    --cc=fengchunsong@huawei.com \
    --cc=lixuan47@hisilicon.com \
    --cc=stable@dpdk.org \
    --cc=xavier.huwei@huawei.com \
    --cc=zhenghongbo3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).