DPDK usage discussions
 help / color / mirror / Atom feed
* Re: [dpdk-users] IGB UIO vs i40e PMD ?
@ 2021-03-06 13:30 曾懷恩
  0 siblings, 0 replies; 2+ messages in thread
From: 曾懷恩 @ 2021-03-06 13:30 UTC (permalink / raw)
  To: david.aldrich.ntml, users

IGB UIO is based on Linux userspace io.

The UIO mechanism make device memory in kernel can be mapped to a driver in userspace and programmer can program features in this driver.

Therefore there are 2 parts in UIO mechanism, one is a kernel module to register device to UIO(e.g. igb_uio.ko), the other one is the userspace driver(e.g. i40e_pmd)

vfio is different to UIO, but it also provides userspace driver functions to make userspace can access PCI device

^ permalink raw reply	[flat|nested] 2+ messages in thread

* [dpdk-users] IGB UIO vs i40e PMD ?
@ 2021-03-05 15:00 David Aldrich
  0 siblings, 0 replies; 2+ messages in thread
From: David Aldrich @ 2021-03-05 15:00 UTC (permalink / raw)
  To: users


Our DPDK application interfaces with an Intel X722 NIC. We use the IGB UIO

We now need to interface to a different NIC (on a custom FPGA). I've been
asked to connect to it using IGB UIO but have been told we may need to use
i40e PMD instead.

I don't understand whether IGB UIO and i40e PMD are the same or different
layers.  Are they interchangeable or does one use them together?

I also note that dpdk_setup.sh offers to install IGB UIO, VFIO and KNI
modules but does not mention i40e PMD. Why is this?

Sorry for my ignorance. Any explanation would be appreciated.


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-03-06 13:30 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-06 13:30 [dpdk-users] IGB UIO vs i40e PMD ? 曾懷恩
  -- strict thread matches above, loose matches on Subject: below --
2021-03-05 15:00 David Aldrich

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git