* mlx5 - shared_rxq not working on some Connect x6 DX @ 2022-10-04 13:24 Haider Ali 2022-10-06 6:44 ` Asaf Penso 0 siblings, 1 reply; 7+ messages in thread From: Haider Ali @ 2022-10-04 13:24 UTC (permalink / raw) To: users; +Cc: Asaf Penso [-- Attachment #1: Type: text/plain, Size: 1433 bytes --] Hi, I used two servers A and B. Server A has Connect x5 and x6 DX cards while server B has Connect x6 DX card. I have checked with Connect x5 and x6 DX cards on "server A" and I am able to get below rxq_share device capability: testpmd> show port info all Device capabilities: 0x14( RXQ_SHARE FLOW_SHARED_OBJECT_KEEP ) Server A setting: # ofed_info -s MLNX_OFED_LINUX-5.4-3.1.0.0: # ethtool -i enp129s0f0 driver: mlx5_core version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes But when I moved to server B with another Connect x6 DX card, I could not see this capability. testpmd> show port info all Device capabilities: 0x14( FLOW_SHARED_OBJECT_KEEP ) Server B Settings: # ofed_info -s MLNX_OFED_LINUX-5.4-3.5.8.0: # ethtool -i enp132s0f0 driver: mlx5_core version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) expansion-rom-version: bus-info: 0000:84:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Although server B has higher versions of OFED and firmware, my question is do I need to enable/disable firmware settings? Or are there any other configurations we need to apply? Regards, Haider [-- Attachment #2: Type: text/html, Size: 4585 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mlx5 - shared_rxq not working on some Connect x6 DX 2022-10-04 13:24 mlx5 - shared_rxq not working on some Connect x6 DX Haider Ali @ 2022-10-06 6:44 ` Asaf Penso 2022-10-06 7:48 ` Haider Ali 2022-10-18 6:04 ` Xueming(Steven) Li 0 siblings, 2 replies; 7+ messages in thread From: Asaf Penso @ 2022-10-06 6:44 UTC (permalink / raw) To: Haider Ali, users [-- Attachment #1: Type: text/plain, Size: 1849 bytes --] Hello Haider, Besides the info print issue, can you describe what is the use case? What do you try to achieve and whether you see any issue? Regards, Asaf Penso ________________________________ From: Haider Ali <haider@dreambigsemi.com> Sent: Tuesday, October 4, 2022 4:24:03 PM To: users <users@dpdk.org> Cc: Asaf Penso <asafp@nvidia.com> Subject: mlx5 - shared_rxq not working on some Connect x6 DX Hi, I used two servers A and B. Server A has Connect x5 and x6 DX cards while server B has Connect x6 DX card. I have checked with Connect x5 and x6 DX cards on "server A" and I am able to get below rxq_share device capability: testpmd> show port info all Device capabilities: 0x14( RXQ_SHARE FLOW_SHARED_OBJECT_KEEP ) Server A setting: # ofed_info -s MLNX_OFED_LINUX-5.4-3.1.0.0: # ethtool -i enp129s0f0 driver: mlx5_core version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes But when I moved to server B with another Connect x6 DX card, I could not see this capability. testpmd> show port info all Device capabilities: 0x14( FLOW_SHARED_OBJECT_KEEP ) Server B Settings: # ofed_info -s MLNX_OFED_LINUX-5.4-3.5.8.0: # ethtool -i enp132s0f0 driver: mlx5_core version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) expansion-rom-version: bus-info: 0000:84:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Although server B has higher versions of OFED and firmware, my question is do I need to enable/disable firmware settings? Or are there any other configurations we need to apply? Regards, Haider [-- Attachment #2: Type: text/html, Size: 5491 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mlx5 - shared_rxq not working on some Connect x6 DX 2022-10-06 6:44 ` Asaf Penso @ 2022-10-06 7:48 ` Haider Ali 2022-10-18 6:04 ` Xueming(Steven) Li 1 sibling, 0 replies; 7+ messages in thread From: Haider Ali @ 2022-10-06 7:48 UTC (permalink / raw) To: Asaf Penso, users [-- Attachment #1: Type: text/plain, Size: 5542 bytes --] Thanks Asaf for your reply. We want to use shared_rxqs between PF and VF_rep. I tried to test this feature with the testpmd shared_rxq fwd. We used the "--rxq-share" option in the command line to run the testpmd. With server A, we were able to create shared_rxqs between PF and VF_rep0, but with server B we were not able to create shared_rxqs instead server B created individual RX queues on PF and VF_rep0. We confirmed this by printing the stats of both ports. As in mlx5 doc "Shared Rx queue: Counters of received packets and bytes number of devices in same share group are same. Counters of received packets and bytes number of queues in same group and queue ID are same." As PF and VF_rep0 should have the same RX stats, by printing port stats server A shows the same stats on both PF and VF_rep but server B doesn't. Please review the below test configurations and port stats on both servers. Configurations on SERVER A and SERVER B: $ sudo ./build_22_07/app/dpdk-testpmd -l 0-1 -n 4 -a 0000:04:00.0,representor=vf[0] -- -i --nb-cores=1 --rxq-share=2 mlx5_common: DevX create q counter set failed errno=22 status=0 syndrome=0 mlx5_common: DevX create q counter set failed errno=22 status=0 syndrome=0 testpmd> set fwd shared_rxq testpmd> start SEND PACKET FROM SCAPY: The packet sent from the wire is received on PF but port stats of both were updated correctly: sendp(Ether()/Dot1Q(vlan=123)/IP()/UDP(),iface='enp130s0f0',count=24) SHOW STATS ON SERVER A: testpmd> show port stats all ######################## NIC statistics for port 0 ######################## RX-packets: 24 RX-missed: 0 RX-bytes: 1440 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ ######################## NIC statistics for port 1 ######################## RX-packets: 24 RX-missed: 0 RX-bytes: 1440 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ SHOW STATS ON SERVER B: testpmd> show port stats all ######################## NIC statistics for port 0 ######################## RX-packets: 24 RX-missed: 0 RX-bytes: 1440 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 1 Rx-bps: 808 Tx-pps: 0 Tx-bps: 0 ############################################################################ ######################## NIC statistics for port 1 ######################## RX-packets: 0 RX-missed: 0 RX-bytes: 0 RX-errors: 0 RX-nombuf: 0 TX-packets: 0 TX-errors: 0 TX-bytes: 0 Throughput (since last show) Rx-pps: 0 Rx-bps: 0 Tx-pps: 0 Tx-bps: 0 ############################################################################ Regards, Haider ________________________________ From: Asaf Penso <asafp@nvidia.com> Sent: Thursday, October 6, 2022 11:44 AM To: Haider Ali <haider@dreambigsemi.com>; users <users@dpdk.org> Subject: Re: mlx5 - shared_rxq not working on some Connect x6 DX Hello Haider, Besides the info print issue, can you describe what is the use case? What do you try to achieve and whether you see any issue? Regards, Asaf Penso ________________________________ From: Haider Ali <haider@dreambigsemi.com> Sent: Tuesday, October 4, 2022 4:24:03 PM To: users <users@dpdk.org> Cc: Asaf Penso <asafp@nvidia.com> Subject: mlx5 - shared_rxq not working on some Connect x6 DX Hi, I used two servers A and B. Server A has Connect x5 and x6 DX cards while server B has Connect x6 DX card. I have checked with Connect x5 and x6 DX cards on "server A" and I am able to get below rxq_share device capability: testpmd> show port info all Device capabilities: 0x14( RXQ_SHARE FLOW_SHARED_OBJECT_KEEP ) Server A setting: # ofed_info -s MLNX_OFED_LINUX-5.4-3.1.0.0: # ethtool -i enp129s0f0 driver: mlx5_core version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes But when I moved to server B with another Connect x6 DX card, I could not see this capability. testpmd> show port info all Device capabilities: 0x14( FLOW_SHARED_OBJECT_KEEP ) Server B Settings: # ofed_info -s MLNX_OFED_LINUX-5.4-3.5.8.0: # ethtool -i enp132s0f0 driver: mlx5_core version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) expansion-rom-version: bus-info: 0000:84:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Although server B has higher versions of OFED and firmware, my question is do I need to enable/disable firmware settings? Or are there any other configurations we need to apply? Regards, Haider [-- Attachment #2: Type: text/html, Size: 19671 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: mlx5 - shared_rxq not working on some Connect x6 DX 2022-10-06 6:44 ` Asaf Penso 2022-10-06 7:48 ` Haider Ali @ 2022-10-18 6:04 ` Xueming(Steven) Li 2022-10-18 6:10 ` Haider Ali 1 sibling, 1 reply; 7+ messages in thread From: Xueming(Steven) Li @ 2022-10-18 6:04 UTC (permalink / raw) To: Haider Ali; +Cc: users, Asaf Penso [-- Attachment #1: Type: text/plain, Size: 2343 bytes --] Hi Haider, The device capability is critical to support shared RXQ. The OFED and firmware version of server B seems not up to date, could please align with server A? Best Regards, Xueming Li From: Asaf Penso <asafp@nvidia.com> Sent: Thursday, October 6, 2022 14:45 To: Haider Ali <haider@dreambigsemi.com>; users <users@dpdk.org> Subject: Re: mlx5 - shared_rxq not working on some Connect x6 DX Hello Haider, Besides the info print issue, can you describe what is the use case? What do you try to achieve and whether you see any issue? Regards, Asaf Penso ________________________________ From: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>> Sent: Tuesday, October 4, 2022 4:24:03 PM To: users <users@dpdk.org<mailto:users@dpdk.org>> Cc: Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Subject: mlx5 - shared_rxq not working on some Connect x6 DX Hi, I used two servers A and B. Server A has Connect x5 and x6 DX cards while server B has Connect x6 DX card. I have checked with Connect x5 and x6 DX cards on "server A" and I am able to get below rxq_share device capability: testpmd> show port info all Device capabilities: 0x14( RXQ_SHARE FLOW_SHARED_OBJECT_KEEP ) Server A setting: # ofed_info -s MLNX_OFED_LINUX-5.4-3.1.0.0: # ethtool -i enp129s0f0 driver: mlx5_core version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes But when I moved to server B with another Connect x6 DX card, I could not see this capability. testpmd> show port info all Device capabilities: 0x14( FLOW_SHARED_OBJECT_KEEP ) Server B Settings: # ofed_info -s MLNX_OFED_LINUX-5.4-3.5.8.0: # ethtool -i enp132s0f0 driver: mlx5_core version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) expansion-rom-version: bus-info: 0000:84:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Although server B has higher versions of OFED and firmware, my question is do I need to enable/disable firmware settings? Or are there any other configurations we need to apply? Regards, Haider [-- Attachment #2: Type: text/html, Size: 13439 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mlx5 - shared_rxq not working on some Connect x6 DX 2022-10-18 6:04 ` Xueming(Steven) Li @ 2022-10-18 6:10 ` Haider Ali 2022-10-18 6:30 ` Xueming(Steven) Li 0 siblings, 1 reply; 7+ messages in thread From: Haider Ali @ 2022-10-18 6:10 UTC (permalink / raw) To: Xueming(Steven) Li; +Cc: users, Asaf Penso [-- Attachment #1: Type: text/plain, Size: 3031 bytes --] Server B has higher versions of OFED and firmware than server A. Please let me know if are you asking me to downgrade OFED and firmware on server B. Have you removed shared RXQ features in higher versions of OFED and firmware? Regards, Haider ________________________________ From: Xueming(Steven) Li <xuemingl@nvidia.com> Sent: Tuesday, October 18, 2022 11:04 AM To: Haider Ali <haider@dreambigsemi.com> Cc: users <users@dpdk.org>; Asaf Penso <asafp@nvidia.com> Subject: RE: mlx5 - shared_rxq not working on some Connect x6 DX Hi Haider, The device capability is critical to support shared RXQ. The OFED and firmware version of server B seems not up to date, could please align with server A? Best Regards, Xueming Li From: Asaf Penso <asafp@nvidia.com> Sent: Thursday, October 6, 2022 14:45 To: Haider Ali <haider@dreambigsemi.com>; users <users@dpdk.org> Subject: Re: mlx5 - shared_rxq not working on some Connect x6 DX Hello Haider, Besides the info print issue, can you describe what is the use case? What do you try to achieve and whether you see any issue? Regards, Asaf Penso ________________________________ From: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>> Sent: Tuesday, October 4, 2022 4:24:03 PM To: users <users@dpdk.org<mailto:users@dpdk.org>> Cc: Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Subject: mlx5 - shared_rxq not working on some Connect x6 DX Hi, I used two servers A and B. Server A has Connect x5 and x6 DX cards while server B has Connect x6 DX card. I have checked with Connect x5 and x6 DX cards on "server A" and I am able to get below rxq_share device capability: testpmd> show port info all Device capabilities: 0x14( RXQ_SHARE FLOW_SHARED_OBJECT_KEEP ) Server A setting: # ofed_info -s MLNX_OFED_LINUX-5.4-3.1.0.0: # ethtool -i enp129s0f0 driver: mlx5_core version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes But when I moved to server B with another Connect x6 DX card, I could not see this capability. testpmd> show port info all Device capabilities: 0x14( FLOW_SHARED_OBJECT_KEEP ) Server B Settings: # ofed_info -s MLNX_OFED_LINUX-5.4-3.5.8.0: # ethtool -i enp132s0f0 driver: mlx5_core version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) expansion-rom-version: bus-info: 0000:84:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Although server B has higher versions of OFED and firmware, my question is do I need to enable/disable firmware settings? Or are there any other configurations we need to apply? Regards, Haider [-- Attachment #2: Type: text/html, Size: 13677 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: mlx5 - shared_rxq not working on some Connect x6 DX 2022-10-18 6:10 ` Haider Ali @ 2022-10-18 6:30 ` Xueming(Steven) Li 2022-10-19 10:30 ` Haider Ali 0 siblings, 1 reply; 7+ messages in thread From: Xueming(Steven) Li @ 2022-10-18 6:30 UTC (permalink / raw) To: Haider Ali; +Cc: users, Asaf Penso [-- Attachment #1: Type: text/plain, Size: 3804 bytes --] Hi Haider: From your first post, ofed version of B is higher, you are right. Fw version is lower - please ignore 16 and 22 prefix which is NIC type. version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) Thanks, Xueming From: Haider Ali <haider@dreambigsemi.com> Sent: Tuesday, October 18, 2022 14:11 To: Xueming(Steven) Li <xuemingl@nvidia.com> Cc: users <users@dpdk.org>; Asaf Penso <asafp@nvidia.com> Subject: Re: mlx5 - shared_rxq not working on some Connect x6 DX Server B has higher versions of OFED and firmware than server A. Please let me know if are you asking me to downgrade OFED and firmware on server B. Have you removed shared RXQ features in higher versions of OFED and firmware? Regards, Haider ________________________________ From: Xueming(Steven) Li <xuemingl@nvidia.com<mailto:xuemingl@nvidia.com>> Sent: Tuesday, October 18, 2022 11:04 AM To: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>> Cc: users <users@dpdk.org<mailto:users@dpdk.org>>; Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Subject: RE: mlx5 - shared_rxq not working on some Connect x6 DX Hi Haider, The device capability is critical to support shared RXQ. The OFED and firmware version of server B seems not up to date, could please align with server A? Best Regards, Xueming Li From: Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Sent: Thursday, October 6, 2022 14:45 To: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>>; users <users@dpdk.org<mailto:users@dpdk.org>> Subject: Re: mlx5 - shared_rxq not working on some Connect x6 DX Hello Haider, Besides the info print issue, can you describe what is the use case? What do you try to achieve and whether you see any issue? Regards, Asaf Penso ________________________________ From: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>> Sent: Tuesday, October 4, 2022 4:24:03 PM To: users <users@dpdk.org<mailto:users@dpdk.org>> Cc: Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Subject: mlx5 - shared_rxq not working on some Connect x6 DX Hi, I used two servers A and B. Server A has Connect x5 and x6 DX cards while server B has Connect x6 DX card. I have checked with Connect x5 and x6 DX cards on "server A" and I am able to get below rxq_share device capability: testpmd> show port info all Device capabilities: 0x14( RXQ_SHARE FLOW_SHARED_OBJECT_KEEP ) Server A setting: # ofed_info -s MLNX_OFED_LINUX-5.4-3.1.0.0: # ethtool -i enp129s0f0 driver: mlx5_core version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes But when I moved to server B with another Connect x6 DX card, I could not see this capability. testpmd> show port info all Device capabilities: 0x14( FLOW_SHARED_OBJECT_KEEP ) Server B Settings: # ofed_info -s MLNX_OFED_LINUX-5.4-3.5.8.0: # ethtool -i enp132s0f0 driver: mlx5_core version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) expansion-rom-version: bus-info: 0000:84:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Although server B has higher versions of OFED and firmware, my question is do I need to enable/disable firmware settings? Or are there any other configurations we need to apply? Regards, Haider [-- Attachment #2: Type: text/html, Size: 17409 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: mlx5 - shared_rxq not working on some Connect x6 DX 2022-10-18 6:30 ` Xueming(Steven) Li @ 2022-10-19 10:30 ` Haider Ali 0 siblings, 0 replies; 7+ messages in thread From: Haider Ali @ 2022-10-19 10:30 UTC (permalink / raw) To: Xueming(Steven) Li; +Cc: users, Asaf Penso [-- Attachment #1.1: Type: text/plain, Size: 4413 bytes --] Thanks Xueming. I have updated my firmware and now shared_rxq is working. Please add a note if possible in your dpdk documents like the below for minimum requirements of firmware and OFED version for shared_rxq. [cid:1f21cc59-3850-4bcb-a8c6-bd4f9ffaef4b] Regards, Haider ________________________________ From: Xueming(Steven) Li <xuemingl@nvidia.com> Sent: Tuesday, October 18, 2022 11:30 AM To: Haider Ali <haider@dreambigsemi.com> Cc: users <users@dpdk.org>; Asaf Penso <asafp@nvidia.com> Subject: RE: mlx5 - shared_rxq not working on some Connect x6 DX Hi Haider: From your first post, ofed version of B is higher, you are right. Fw version is lower – please ignore 16 and 22 prefix which is NIC type. version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) Thanks, Xueming From: Haider Ali <haider@dreambigsemi.com> Sent: Tuesday, October 18, 2022 14:11 To: Xueming(Steven) Li <xuemingl@nvidia.com> Cc: users <users@dpdk.org>; Asaf Penso <asafp@nvidia.com> Subject: Re: mlx5 - shared_rxq not working on some Connect x6 DX Server B has higher versions of OFED and firmware than server A. Please let me know if are you asking me to downgrade OFED and firmware on server B. Have you removed shared RXQ features in higher versions of OFED and firmware? Regards, Haider ________________________________ From: Xueming(Steven) Li <xuemingl@nvidia.com<mailto:xuemingl@nvidia.com>> Sent: Tuesday, October 18, 2022 11:04 AM To: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>> Cc: users <users@dpdk.org<mailto:users@dpdk.org>>; Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Subject: RE: mlx5 - shared_rxq not working on some Connect x6 DX Hi Haider, The device capability is critical to support shared RXQ. The OFED and firmware version of server B seems not up to date, could please align with server A? Best Regards, Xueming Li From: Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Sent: Thursday, October 6, 2022 14:45 To: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>>; users <users@dpdk.org<mailto:users@dpdk.org>> Subject: Re: mlx5 - shared_rxq not working on some Connect x6 DX Hello Haider, Besides the info print issue, can you describe what is the use case? What do you try to achieve and whether you see any issue? Regards, Asaf Penso ________________________________ From: Haider Ali <haider@dreambigsemi.com<mailto:haider@dreambigsemi.com>> Sent: Tuesday, October 4, 2022 4:24:03 PM To: users <users@dpdk.org<mailto:users@dpdk.org>> Cc: Asaf Penso <asafp@nvidia.com<mailto:asafp@nvidia.com>> Subject: mlx5 - shared_rxq not working on some Connect x6 DX Hi, I used two servers A and B. Server A has Connect x5 and x6 DX cards while server B has Connect x6 DX card. I have checked with Connect x5 and x6 DX cards on "server A" and I am able to get below rxq_share device capability: testpmd> show port info all Device capabilities: 0x14( RXQ_SHARE FLOW_SHARED_OBJECT_KEEP ) Server A setting: # ofed_info -s MLNX_OFED_LINUX-5.4-3.1.0.0: # ethtool -i enp129s0f0 driver: mlx5_core version: 5.4-3.1.0 firmware-version: 16.32.1010 (MT_0000000080) expansion-rom-version: bus-info: 0000:81:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes But when I moved to server B with another Connect x6 DX card, I could not see this capability. testpmd> show port info all Device capabilities: 0x14( FLOW_SHARED_OBJECT_KEEP ) Server B Settings: # ofed_info -s MLNX_OFED_LINUX-5.4-3.5.8.0: # ethtool -i enp132s0f0 driver: mlx5_core version: 5.4-3.5.8 firmware-version: 22.31.1014 (MT_0000000436) expansion-rom-version: bus-info: 0000:84:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: no supports-priv-flags: yes Although server B has higher versions of OFED and firmware, my question is do I need to enable/disable firmware settings? Or are there any other configurations we need to apply? Regards, Haider [-- Attachment #1.2: Type: text/html, Size: 18018 bytes --] [-- Attachment #2: image.png --] [-- Type: image/png, Size: 12182 bytes --] ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-10-24 15:35 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2022-10-04 13:24 mlx5 - shared_rxq not working on some Connect x6 DX Haider Ali 2022-10-06 6:44 ` Asaf Penso 2022-10-06 7:48 ` Haider Ali 2022-10-18 6:04 ` Xueming(Steven) Li 2022-10-18 6:10 ` Haider Ali 2022-10-18 6:30 ` Xueming(Steven) Li 2022-10-19 10:30 ` Haider Ali
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).
![[-- Attachment #2: image.png --] [-- Type: image/png, Size: 12182 bytes --]](../../MW5PR22MB33952251909A5CB2A5F9C378A72B9@MW5PR22MB3395.namprd22.prod.outlook.com/2-image.png){kind=link}