From: Yongseok Koh <yskoh@mellanox.com>
To: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Cc: dev@dpdk.org, Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: Re: [dpdk-dev] [PATCH v2 02/20] net/mlx5: handle drop queues are regular queues
Date: Mon, 2 Jul 2018 18:07:03 -0700 [thread overview]
Message-ID: <20180703010703.GB38831@yongseok-MBP.local> (raw)
In-Reply-To: <1368a8720f3ec3c40e47a6b1d9ef1edf0f38a646.1530111623.git.nelio.laranjeiro@6wind.com>
On Wed, Jun 27, 2018 at 05:07:34PM +0200, Nelio Laranjeiro wrote:
> Drop queues are essentially used in flows due to Verbs API, the
> information if the fate of the flow is a drop or not is already present
> in the flow. Due to this, drop queues can be fully mapped on regular
> queues.
The title doesn't look good. Maybe typo?
net/mlx5: handle drop queues are regular queues
'are' -> 'as'?
> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
> ---
> drivers/net/mlx5/mlx5.c | 24 ++--
> drivers/net/mlx5/mlx5.h | 14 ++-
> drivers/net/mlx5/mlx5_flow.c | 94 +++++++-------
> drivers/net/mlx5/mlx5_rxq.c | 232 +++++++++++++++++++++++++++++++++++
> drivers/net/mlx5/mlx5_rxtx.h | 8 ++
> 5 files changed, 310 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index d01c0f6cf..aba6c1f9f 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -260,7 +260,6 @@ mlx5_dev_close(struct rte_eth_dev *dev)
> priv->txqs_n = 0;
> priv->txqs = NULL;
> }
> - mlx5_flow_delete_drop_queue(dev);
> mlx5_mprq_free_mp(dev);
> mlx5_mr_release(dev);
> if (priv->pd != NULL) {
> @@ -1100,22 +1099,15 @@ mlx5_dev_spawn_one(struct rte_device *dpdk_dev,
> mlx5_link_update(eth_dev, 0);
> /* Store device configuration on private structure. */
> priv->config = config;
> - /* Create drop queue. */
> - err = mlx5_flow_create_drop_queue(eth_dev);
> - if (err) {
> - DRV_LOG(ERR, "port %u drop queue allocation failed: %s",
> - eth_dev->data->port_id, strerror(rte_errno));
> - err = rte_errno;
> - goto error;
> - }
> /* Supported Verbs flow priority number detection. */
> - if (verb_priorities == 0)
> - verb_priorities = mlx5_get_max_verbs_prio(eth_dev);
> - if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) {
> - DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u",
> - eth_dev->data->port_id, verb_priorities);
> - err = ENOTSUP;
> - goto error;
> + if (verb_priorities == 0) {
> + err = mlx5_verbs_max_prio(eth_dev);
> + if (err < 0) {
> + DRV_LOG(ERR, "port %u wrong Verbs flow priorities",
> + eth_dev->data->port_id);
> + goto error;
> + }
> + verb_priorities = err;
> }
> priv->config.max_verbs_prio = verb_priorities;
> /*
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index 6674a77d4..11aa0932f 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -131,9 +131,6 @@ enum mlx5_verbs_alloc_type {
> MLX5_VERBS_ALLOC_TYPE_RX_QUEUE,
> };
>
> -/* 8 Verbs priorities. */
> -#define MLX5_VERBS_FLOW_PRIO_8 8
> -
> /**
> * Verbs allocator needs a context to know in the callback which kind of
> * resources it is allocating.
> @@ -145,6 +142,12 @@ struct mlx5_verbs_alloc_ctx {
>
> LIST_HEAD(mlx5_mr_list, mlx5_mr);
>
> +/* Flow drop context necessary due to Verbs API. */
> +struct mlx5_drop {
> + struct mlx5_hrxq *hrxq; /* Hash Rx queue queue. */
> + struct mlx5_rxq_ibv *rxq; /* Verbs Rx queue. */
> +};
> +
> struct priv {
> LIST_ENTRY(priv) mem_event_cb; /* Called by memory event callback. */
> struct rte_eth_dev_data *dev_data; /* Pointer to device data. */
> @@ -175,7 +178,7 @@ struct priv {
> struct rte_intr_handle intr_handle; /* Interrupt handler. */
> unsigned int (*reta_idx)[]; /* RETA index table. */
> unsigned int reta_idx_n; /* RETA index size. */
> - struct mlx5_hrxq_drop *flow_drop_queue; /* Flow drop queue. */
> + struct mlx5_drop drop; /* Flow drop queues. */
priv->drop sounds strange. Why did you change the name?
How about priv->flow_drop if you didn't like the full name?
> struct mlx5_flows flows; /* RTE Flow rules. */
> struct mlx5_flows ctrl_flows; /* Control flow rules. */
> struct {
> @@ -306,7 +309,8 @@ int mlx5_traffic_restart(struct rte_eth_dev *dev);
>
> /* mlx5_flow.c */
>
> -unsigned int mlx5_get_max_verbs_prio(struct rte_eth_dev *dev);
> +int mlx5_verbs_max_prio(struct rte_eth_dev *dev);
> +void mlx5_flow_print(struct rte_flow *flow);
> int mlx5_flow_validate(struct rte_eth_dev *dev,
> const struct rte_flow_attr *attr,
> const struct rte_flow_item items[],
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index a45cb06e1..8b5b695d4 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -75,6 +75,58 @@ struct ibv_spec_header {
> uint16_t size;
> };
>
> + /**
> + * Get the maximum number of priority available.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + *
> + * @return
> + * number of supported Verbs flow priority on success, a negative errno
> + * value otherwise and rte_errno is set.
> + */
> +int
> +mlx5_verbs_max_prio(struct rte_eth_dev *dev)
> +{
> + struct {
> + struct ibv_flow_attr attr;
> + struct ibv_flow_spec_eth eth;
> + struct ibv_flow_spec_action_drop drop;
> + } flow_attr = {
> + .attr = {
> + .num_of_specs = 2,
> + },
> + .eth = {
> + .type = IBV_FLOW_SPEC_ETH,
> + .size = sizeof(struct ibv_flow_spec_eth),
> + },
> + .drop = {
> + .size = sizeof(struct ibv_flow_spec_action_drop),
> + .type = IBV_FLOW_SPEC_ACTION_DROP,
> + },
> + };
> + struct ibv_flow *flow;
> + uint32_t verb_priorities;
> + struct mlx5_hrxq *drop = mlx5_hrxq_drop_new(dev);
> +
> + if (!drop) {
> + rte_errno = ENOTSUP;
> + return -rte_errno;
> + }
> + for (verb_priorities = 0; 1; verb_priorities++) {
> + flow_attr.attr.priority = verb_priorities;
> + flow = mlx5_glue->create_flow(drop->qp,
> + &flow_attr.attr);
> + if (!flow)
> + break;
> + claim_zero(mlx5_glue->destroy_flow(flow));
> + }
> + mlx5_hrxq_drop_release(dev, drop);
> + DRV_LOG(INFO, "port %u flow maximum priority: %d",
> + dev->data->port_id, verb_priorities);
> + return verb_priorities;
> +}
> +
> /**
> * Convert a flow.
> *
> @@ -184,32 +236,6 @@ mlx5_flow_list_flush(struct rte_eth_dev *dev, struct mlx5_flows *list)
> }
> }
>
> -/**
> - * Create drop queue.
> - *
> - * @param dev
> - * Pointer to Ethernet device.
> - *
> - * @return
> - * 0 on success, a negative errno value otherwise and rte_errno is set.
> - */
> -int
> -mlx5_flow_create_drop_queue(struct rte_eth_dev *dev __rte_unused)
> -{
> - return 0;
> -}
> -
> -/**
> - * Delete drop queue.
> - *
> - * @param dev
> - * Pointer to Ethernet device.
> - */
> -void
> -mlx5_flow_delete_drop_queue(struct rte_eth_dev *dev __rte_unused)
> -{
> -}
> -
> /**
> * Remove all flows.
> *
> @@ -292,6 +318,7 @@ mlx5_ctrl_flow_vlan(struct rte_eth_dev *dev,
> struct priv *priv = dev->data->dev_private;
> const struct rte_flow_attr attr = {
> .ingress = 1,
> + .priority = priv->config.max_verbs_prio - 1,
> };
> struct rte_flow_item items[] = {
> {
> @@ -830,18 +857,3 @@ mlx5_dev_filter_ctrl(struct rte_eth_dev *dev,
> }
> return 0;
> }
> -
> -/**
> - * Detect number of Verbs flow priorities supported.
> - *
> - * @param dev
> - * Pointer to Ethernet device.
> - *
> - * @return
> - * number of supported Verbs flow priority.
> - */
> -unsigned int
> -mlx5_get_max_verbs_prio(struct rte_eth_dev *dev __rte_unused)
> -{
> - return 8;
> -}
> diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
> index 17db7c160..5f17dce50 100644
> --- a/drivers/net/mlx5/mlx5_rxq.c
> +++ b/drivers/net/mlx5/mlx5_rxq.c
> @@ -1949,3 +1949,235 @@ mlx5_hrxq_ibv_verify(struct rte_eth_dev *dev)
> }
> return ret;
> }
> +
> +/**
> + * Create a drop Rx queue Verbs object.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + *
> + * @return
> + * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + */
> +struct mlx5_rxq_ibv *
> +mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev)
> +{
> + struct priv *priv = dev->data->dev_private;
> + struct ibv_cq *cq;
> + struct ibv_wq *wq = NULL;
> + struct mlx5_rxq_ibv *rxq;
> +
> + if (priv->drop.rxq)
> + return priv->drop.rxq;
> + cq = mlx5_glue->create_cq(priv->ctx, 1, NULL, NULL, 0);
> + if (!cq) {
> + DEBUG("port %u cannot allocate CQ for drop queue",
> + dev->data->port_id);
> + rte_errno = errno;
> + goto error;
> + }
> + wq = mlx5_glue->create_wq(priv->ctx,
> + &(struct ibv_wq_init_attr){
> + .wq_type = IBV_WQT_RQ,
> + .max_wr = 1,
> + .max_sge = 1,
> + .pd = priv->pd,
> + .cq = cq,
> + });
> + if (!wq) {
> + DEBUG("port %u cannot allocate WQ for drop queue",
> + dev->data->port_id);
> + rte_errno = errno;
> + goto error;
> + }
> + rxq = rte_calloc(__func__, 1, sizeof(*rxq), 0);
> + if (!rxq) {
> + DEBUG("port %u cannot allocate drop Rx queue memory",
> + dev->data->port_id);
> + rte_errno = ENOMEM;
> + goto error;
> + }
> + rxq->cq = cq;
> + rxq->wq = wq;
> + priv->drop.rxq = rxq;
> + return rxq;
> +error:
> + if (wq)
> + claim_zero(mlx5_glue->destroy_wq(wq));
> + if (cq)
> + claim_zero(mlx5_glue->destroy_cq(cq));
> + return NULL;
> +}
> +
> +/**
> + * Release a drop Rx queue Verbs object.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + * @param rxq
> + * Pointer to the drop Verbs Rx queue.
> + *
> + * @return
> + * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + */
> +void
> +mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev, struct mlx5_rxq_ibv *rxq)
If rxq for drop is saved in priv->drop.rxq, then why does it have to get rxq
pointer as an argument? Looks redundant.
> +{
> + if (rxq->wq)
> + claim_zero(mlx5_glue->destroy_wq(rxq->wq));
> + if (rxq->cq)
> + claim_zero(mlx5_glue->destroy_cq(rxq->cq));
> + rte_free(rxq);
> + ((struct priv *)dev->data->dev_private)->drop.rxq = NULL;
> +}
> +
> +/**
> + * Create a drop indirection table.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + *
> + * @return
> + * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + */
> +struct mlx5_ind_table_ibv *
> +mlx5_ind_table_ibv_drop_new(struct rte_eth_dev *dev)
> +{
> + struct priv *priv = dev->data->dev_private;
> + struct mlx5_ind_table_ibv *ind_tbl;
> + struct mlx5_rxq_ibv *rxq;
> + struct mlx5_ind_table_ibv tmpl;
> +
> + rxq = mlx5_rxq_ibv_drop_new(dev);
> + if (!rxq)
> + return NULL;
> + tmpl.ind_table = mlx5_glue->create_rwq_ind_table
> + (priv->ctx,
> + &(struct ibv_rwq_ind_table_init_attr){
> + .log_ind_tbl_size = 0,
> + .ind_tbl = &rxq->wq,
> + .comp_mask = 0,
> + });
> + if (!tmpl.ind_table) {
> + DEBUG("port %u cannot allocate indirection table for drop"
> + " queue",
> + dev->data->port_id);
> + rte_errno = errno;
> + goto error;
> + }
> + ind_tbl = rte_calloc(__func__, 1, sizeof(*ind_tbl), 0);
> + if (!ind_tbl) {
> + rte_errno = ENOMEM;
> + goto error;
> + }
> + ind_tbl->ind_table = tmpl.ind_table;
> + return ind_tbl;
> +error:
> + mlx5_rxq_ibv_drop_release(dev, rxq);
> + return NULL;
> +}
> +
> +/**
> + * Release a drop indirection table.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + * @param ind_tbl
> + * Indirection table to release.
> + */
> +void
> +mlx5_ind_table_ibv_drop_release(struct rte_eth_dev *dev,
> + struct mlx5_ind_table_ibv *ind_tbl)
ind_tbl is a redundant argument. Can be referenced by
priv->drop.hrxq->ind_table.
> +{
> + claim_zero(mlx5_glue->destroy_rwq_ind_table(ind_tbl->ind_table));
> + mlx5_rxq_ibv_drop_release
> + (dev, ((struct priv *)dev->data->dev_private)->drop.rxq);
> + rte_free(ind_tbl);
> +}
> +
> +/**
> + * Create a drop Rx Hash queue.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + *
> + * @return
> + * The Verbs object initialised, NULL otherwise and rte_errno is set.
> + */
> +struct mlx5_hrxq *
> +mlx5_hrxq_drop_new(struct rte_eth_dev *dev)
> +{
> + struct priv *priv = dev->data->dev_private;
> + struct mlx5_ind_table_ibv *ind_tbl;
> + struct ibv_qp *qp;
> + struct mlx5_hrxq *hrxq;
> +
> + if (priv->drop.hrxq) {
> + rte_atomic32_inc(&priv->drop.hrxq->refcnt);
> + return priv->drop.hrxq;
> + }
> + ind_tbl = mlx5_ind_table_ibv_drop_new(dev);
> + if (!ind_tbl)
> + return NULL;
> + qp = mlx5_glue->create_qp_ex(priv->ctx,
> + &(struct ibv_qp_init_attr_ex){
> + .qp_type = IBV_QPT_RAW_PACKET,
> + .comp_mask =
> + IBV_QP_INIT_ATTR_PD |
> + IBV_QP_INIT_ATTR_IND_TABLE |
> + IBV_QP_INIT_ATTR_RX_HASH,
> + .rx_hash_conf = (struct ibv_rx_hash_conf){
> + .rx_hash_function =
> + IBV_RX_HASH_FUNC_TOEPLITZ,
> + .rx_hash_key_len = rss_hash_default_key_len,
> + .rx_hash_key = rss_hash_default_key,
> + .rx_hash_fields_mask = 0,
> + },
> + .rwq_ind_tbl = ind_tbl->ind_table,
> + .pd = priv->pd
> + });
> + if (!qp) {
> + DEBUG("port %u cannot allocate QP for drop queue",
> + dev->data->port_id);
> + rte_errno = errno;
> + goto error;
> + }
> + hrxq = rte_calloc(__func__, 1, sizeof(*hrxq), 0);
> + if (!hrxq) {
> + DRV_LOG(WARNING,
> + "port %u cannot allocate memory for drop queue",
> + dev->data->port_id);
> + rte_errno = ENOMEM;
> + goto error;
> + }
> + hrxq->ind_table = ind_tbl;
> + hrxq->qp = qp;
> + priv->drop.hrxq = hrxq;
> + rte_atomic32_set(&hrxq->refcnt, 1);
> + return hrxq;
> +error:
> + if (ind_tbl)
> + mlx5_ind_table_ibv_drop_release(dev, ind_tbl);
> + return NULL;
> +}
> +
> +/**
> + * Release a drop hash Rx queue.
> + *
> + * @param dev
> + * Pointer to Ethernet device.
> + * @param hrxq
> + * Pointer to Hash Rx queue to release.
> + */
> +void
> +mlx5_hrxq_drop_release(struct rte_eth_dev *dev, struct mlx5_hrxq *hrxq)
hrxq is a redundant argument. Can be referenced by priv->drop.hrxq.
Thanks,
Yongseok
> +{
> + struct priv *priv = dev->data->dev_private;
> +
> + if (rte_atomic32_dec_and_test(&hrxq->refcnt)) {
> + claim_zero(mlx5_glue->destroy_qp(hrxq->qp));
> + mlx5_ind_table_ibv_drop_release(dev, hrxq->ind_table);
> + rte_free(hrxq);
> + priv->drop.hrxq = NULL;
> + }
> +}
> diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
> index f53bb43c3..51f7f678b 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.h
> +++ b/drivers/net/mlx5/mlx5_rxtx.h
> @@ -245,6 +245,9 @@ struct mlx5_rxq_ibv *mlx5_rxq_ibv_new(struct rte_eth_dev *dev, uint16_t idx);
> struct mlx5_rxq_ibv *mlx5_rxq_ibv_get(struct rte_eth_dev *dev, uint16_t idx);
> int mlx5_rxq_ibv_release(struct mlx5_rxq_ibv *rxq_ibv);
> int mlx5_rxq_ibv_releasable(struct mlx5_rxq_ibv *rxq_ibv);
> +struct mlx5_rxq_ibv *mlx5_rxq_ibv_drop_new(struct rte_eth_dev *dev);
> +void mlx5_rxq_ibv_drop_release(struct rte_eth_dev *dev,
> + struct mlx5_rxq_ibv *rxq);
> int mlx5_rxq_ibv_verify(struct rte_eth_dev *dev);
> struct mlx5_rxq_ctrl *mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx,
> uint16_t desc, unsigned int socket,
> @@ -265,6 +268,9 @@ struct mlx5_ind_table_ibv *mlx5_ind_table_ibv_get(struct rte_eth_dev *dev,
> int mlx5_ind_table_ibv_release(struct rte_eth_dev *dev,
> struct mlx5_ind_table_ibv *ind_tbl);
> int mlx5_ind_table_ibv_verify(struct rte_eth_dev *dev);
> +struct mlx5_ind_table_ibv *mlx5_ind_table_ibv_drop_new(struct rte_eth_dev *dev);
> +void mlx5_ind_table_ibv_drop_release(struct rte_eth_dev *dev,
> + struct mlx5_ind_table_ibv *ind_tbl);
> struct mlx5_hrxq *mlx5_hrxq_new(struct rte_eth_dev *dev,
> const uint8_t *rss_key, uint32_t rss_key_len,
> uint64_t hash_fields,
> @@ -277,6 +283,8 @@ struct mlx5_hrxq *mlx5_hrxq_get(struct rte_eth_dev *dev,
> uint32_t tunnel, uint32_t rss_level);
> int mlx5_hrxq_release(struct rte_eth_dev *dev, struct mlx5_hrxq *hxrq);
> int mlx5_hrxq_ibv_verify(struct rte_eth_dev *dev);
> +struct mlx5_hrxq *mlx5_hrxq_drop_new(struct rte_eth_dev *dev);
> +void mlx5_hrxq_drop_release(struct rte_eth_dev *dev, struct mlx5_hrxq *hrxq);
> uint64_t mlx5_get_rx_port_offloads(void);
> uint64_t mlx5_get_rx_queue_offloads(struct rte_eth_dev *dev);
>
> --
> 2.18.0
>
next prev parent reply other threads:[~2018-07-03 1:07 UTC|newest]
Thread overview: 118+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-28 11:21 [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 01/12] net/mlx5: remove flow support Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 02/12] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 03/12] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 04/12] net/mlx5: add flow queue action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 05/12] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 06/12] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 07/12] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 08/12] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 09/12] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 10/12] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 11/12] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 12/12] net/mlx5: add RSS " Nelio Laranjeiro
2018-05-28 13:32 ` [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Wiles, Keith
2018-05-28 13:47 ` Ferruh Yigit
2018-05-28 13:50 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 00/20] " Nelio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 01/20] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-02 21:53 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 02/20] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-07-03 1:07 ` Yongseok Koh [this message]
2018-07-03 7:17 ` Nélio Laranjeiro
2018-07-03 17:05 ` Yongseok Koh
2018-07-04 6:44 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 03/20] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-03 1:40 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 04/20] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-07-03 22:27 ` Yongseok Koh
2018-07-04 9:24 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 05/20] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-03 23:00 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 06/20] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-03 23:08 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 07/20] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-03 23:56 ` Yongseok Koh
2018-07-04 12:03 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 08/20] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-04 0:12 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 09/20] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-04 0:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 10/20] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-04 0:17 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 11/20] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-04 0:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 12/20] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-04 8:34 ` Yongseok Koh
2018-07-05 8:47 ` Nélio Laranjeiro
2018-07-05 19:56 ` Yongseok Koh
2018-07-06 8:23 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 13/20] net/mlx5: add RSS " Nelio Laranjeiro
2018-07-06 2:16 ` Yongseok Koh
2018-07-06 15:59 ` Nélio Laranjeiro
2018-07-06 17:35 ` Yongseok Koh
2018-07-09 13:09 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 14/20] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-06 2:18 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 15/20] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-06 8:16 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 16/20] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-06 23:14 ` Yongseok Koh
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 17/20] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-06 23:23 ` Yongseok Koh
2018-07-09 14:53 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 18/20] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-06 23:46 ` Yongseok Koh
2018-07-09 13:58 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 19/20] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-07 0:11 ` Yongseok Koh
2018-07-09 15:00 ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 20/20] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-07 1:08 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-11 19:57 ` Yongseok Koh
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-11 7:22 ` [dpdk-dev] [PATCH v3 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-11 20:00 ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Yongseok Koh
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 " Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-12 9:30 ` [dpdk-dev] [PATCH v4 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-12 9:31 ` [dpdk-dev] [PATCH v4 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-12 10:44 ` [dpdk-dev] [PATCH v4 00/21] net/mlx5: flow rework Shahaf Shuler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180703010703.GB38831@yongseok-MBP.local \
--to=yskoh@mellanox.com \
--cc=adrien.mazarguil@6wind.com \
--cc=dev@dpdk.org \
--cc=nelio.laranjeiro@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).