From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
To: Yoan Picchi <yoan.picchi@arm.com>,
Thomas Monjalon <thomas@monjalon.net>,
Yipeng Wang <yipeng1.wang@intel.com>,
Sameh Gobriel <sameh.gobriel@intel.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, "nd@arm.com" <nd@arm.com>,
Ruifeng Wang <ruifeng.wang@arm.com>,
Nathan Brown <nathan.brown@arm.com>
Subject: RE: [PATCH v7 1/4] hash: pack the hitmask for hash in bulk lookup
Date: Tue, 19 Mar 2024 10:41:51 +0000 [thread overview]
Message-ID: <28cff0e5ea404051acdcb71c567d9d7c@huawei.com> (raw)
In-Reply-To: <20240312154215.802374-2-yoan.picchi@arm.com>
Hi,
> Current hitmask includes padding due to Intel's SIMD
> implementation detail. This patch allows non Intel SIMD
> implementations to benefit from a dense hitmask.
> In addition, the new dense hitmask interweave the primary
> and secondary matches which allow a better cache usage and
> enable future improvements for the SIMD implementations
>
> Signed-off-by: Yoan Picchi <yoan.picchi@arm.com>
> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> Reviewed-by: Nathan Brown <nathan.brown@arm.com>
> ---
> .mailmap | 2 +
> lib/hash/arch/arm/compare_signatures.h | 61 +++++++
> lib/hash/arch/common/compare_signatures.h | 38 +++++
> lib/hash/arch/x86/compare_signatures.h | 53 ++++++
> lib/hash/rte_cuckoo_hash.c | 192 ++++++++++++----------
> 5 files changed, 255 insertions(+), 91 deletions(-)
> create mode 100644 lib/hash/arch/arm/compare_signatures.h
> create mode 100644 lib/hash/arch/common/compare_signatures.h
> create mode 100644 lib/hash/arch/x86/compare_signatures.h
>
> diff --git a/.mailmap b/.mailmap
> index 66ebc20666..00b50414d3 100644
> --- a/.mailmap
> +++ b/.mailmap
> @@ -494,6 +494,7 @@ Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
> Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
> Hariprasad Govindharajan <hariprasad.govindharajan@intel.com>
> Harish Patil <harish.patil@cavium.com> <harish.patil@qlogic.com>
> +Harjot Singh <harjot.singh@arm.com>
> Harman Kalra <hkalra@marvell.com>
> Harneet Singh <harneet.singh@intel.com>
> Harold Huang <baymaxhuang@gmail.com>
> @@ -1633,6 +1634,7 @@ Yixue Wang <yixue.wang@intel.com>
> Yi Yang <yangyi01@inspur.com> <yi.y.yang@intel.com>
> Yi Zhang <zhang.yi75@zte.com.cn>
> Yoann Desmouceaux <ydesmouc@cisco.com>
> +Yoan Picchi <yoan.picchi@arm.com>
> Yogesh Jangra <yogesh.jangra@intel.com>
> Yogev Chaimovich <yogev@cgstowernetworks.com>
> Yongjie Gu <yongjiex.gu@intel.com>
> diff --git a/lib/hash/arch/arm/compare_signatures.h b/lib/hash/arch/arm/compare_signatures.h
> new file mode 100644
> index 0000000000..1af6ba8190
> --- /dev/null
> +++ b/lib/hash/arch/arm/compare_signatures.h
> @@ -0,0 +1,61 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2010-2016 Intel Corporation
> + * Copyright(c) 2018-2024 Arm Limited
> + */
> +
> +/*
> + * Arm's version uses a densely packed hitmask buffer:
> + * Every bit is in use.
> + */
> +
> +#include <inttypes.h>
> +#include <rte_common.h>
> +#include <rte_vect.h>
> +#include "rte_cuckoo_hash.h"
> +
> +#define DENSE_HASH_BULK_LOOKUP 1
> +
> +static inline void
> +compare_signatures_dense(uint16_t *hitmask_buffer,
> + const uint16_t *prim_bucket_sigs,
> + const uint16_t *sec_bucket_sigs,
> + uint16_t sig,
> + enum rte_hash_sig_compare_function sig_cmp_fn)
> +{
> +
> + static_assert(sizeof(*hitmask_buffer) >= 2*(RTE_HASH_BUCKET_ENTRIES/8),
> + "The hitmask must be exactly wide enough to accept the whole hitmask if it is dense");
> +
> + /* For match mask every bits indicates the match */
> + switch (sig_cmp_fn) {
> +#if RTE_HASH_BUCKET_ENTRIES <= 8
> + case RTE_HASH_COMPARE_NEON: {
> + uint16x8_t vmat, vsig, x;
> + int16x8_t shift = {0, 1, 2, 3, 4, 5, 6, 7};
> + uint16_t low, high;
> +
> + vsig = vld1q_dup_u16((uint16_t const *)&sig);
> + /* Compare all signatures in the primary bucket */
> + vmat = vceqq_u16(vsig,
> + vld1q_u16((uint16_t const *)prim_bucket_sigs));
> + x = vshlq_u16(vandq_u16(vmat, vdupq_n_u16(0x0001)), shift);
> + low = (uint16_t)(vaddvq_u16(x));
> + /* Compare all signatures in the secondary bucket */
> + vmat = vceqq_u16(vsig,
> + vld1q_u16((uint16_t const *)sec_bucket_sigs));
> + x = vshlq_u16(vandq_u16(vmat, vdupq_n_u16(0x0001)), shift);
> + high = (uint16_t)(vaddvq_u16(x));
> + *hitmask_buffer = low | high << RTE_HASH_BUCKET_ENTRIES;
> +
> + }
> + break;
> +#endif
> + default:
> + for (unsigned int i = 0; i < RTE_HASH_BUCKET_ENTRIES; i++) {
> + *hitmask_buffer |=
> + ((sig == prim_bucket_sigs[i]) << i);
> + *hitmask_buffer |=
> + ((sig == sec_bucket_sigs[i]) << i) << RTE_HASH_BUCKET_ENTRIES;
> + }
> + }
> +}
> diff --git a/lib/hash/arch/common/compare_signatures.h b/lib/hash/arch/common/compare_signatures.h
> new file mode 100644
> index 0000000000..dcf9444032
> --- /dev/null
> +++ b/lib/hash/arch/common/compare_signatures.h
> @@ -0,0 +1,38 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2010-2016 Intel Corporation
> + * Copyright(c) 2018-2024 Arm Limited
> + */
> +
> +/*
> + * The generic version could use either a dense or sparsely packed hitmask buffer,
> + * but the dense one is slightly faster.
> + */
> +
> +#include <inttypes.h>
> +#include <rte_common.h>
> +#include <rte_vect.h>
> +#include "rte_cuckoo_hash.h"
> +
> +#define DENSE_HASH_BULK_LOOKUP 1
> +
> +static inline void
> +compare_signatures_dense(uint16_t *hitmask_buffer,
> + const uint16_t *prim_bucket_sigs,
> + const uint16_t *sec_bucket_sigs,
> + uint16_t sig,
> + enum rte_hash_sig_compare_function sig_cmp_fn)
> +{
> + (void) sig_cmp_fn;
> +
> + static_assert(sizeof(*hitmask_buffer) >= 2*(RTE_HASH_BUCKET_ENTRIES/8),
> + "The hitmask must be exactly wide enough to accept the whole hitmask if it is dense");
> +
> + /* For match mask every bits indicates the match */
> + for (unsigned int i = 0; i < RTE_HASH_BUCKET_ENTRIES; i++) {
> + *hitmask_buffer |=
> + ((sig == prim_bucket_sigs[i]) << i);
> + *hitmask_buffer |=
> + ((sig == sec_bucket_sigs[i]) << i) << RTE_HASH_BUCKET_ENTRIES;
> + }
> +
> +}
Thanks for re-factoring compare_signatures_...() code, it looks much cleaner that way.
One question I have - does it mean that now for x86 we always use 'sparse' while for all other
ARM and non-ARM platforms we switch to 'dense'?
> diff --git a/lib/hash/arch/x86/compare_signatures.h b/lib/hash/arch/x86/compare_signatures.h
> new file mode 100644
> index 0000000000..7eec499e1f
> --- /dev/null
> +++ b/lib/hash/arch/x86/compare_signatures.h
> @@ -0,0 +1,53 @@
> +/* SPDX-License-Identifier: BSD-3-Clause
> + * Copyright(c) 2010-2016 Intel Corporation
> + * Copyright(c) 2018-2024 Arm Limited
> + */
> +
> +/*
> + * x86's version uses a sparsely packed hitmask buffer:
> + * Every other bit is padding.
> + */
> +
> +#include <inttypes.h>
> +#include <rte_common.h>
> +#include <rte_vect.h>
> +#include "rte_cuckoo_hash.h"
> +
> +#define DENSE_HASH_BULK_LOOKUP 0
> +
> +static inline void
> +compare_signatures_sparse(uint32_t *prim_hash_matches, uint32_t *sec_hash_matches,
> + const struct rte_hash_bucket *prim_bkt,
> + const struct rte_hash_bucket *sec_bkt,
> + uint16_t sig,
> + enum rte_hash_sig_compare_function sig_cmp_fn)
> +{
> + /* For match mask the first bit of every two bits indicates the match */
> + switch (sig_cmp_fn) {
> +#if defined(__SSE2__) && RTE_HASH_BUCKET_ENTRIES <= 8
> + case RTE_HASH_COMPARE_SSE:
> + /* Compare all signatures in the bucket */
> + *prim_hash_matches = _mm_movemask_epi8(_mm_cmpeq_epi16(
> + _mm_load_si128(
> + (__m128i const *)prim_bkt->sig_current),
> + _mm_set1_epi16(sig)));
> + /* Extract the even-index bits only */
> + *prim_hash_matches &= 0x5555;
> + /* Compare all signatures in the bucket */
> + *sec_hash_matches = _mm_movemask_epi8(_mm_cmpeq_epi16(
> + _mm_load_si128(
> + (__m128i const *)sec_bkt->sig_current),
> + _mm_set1_epi16(sig)));
> + /* Extract the even-index bits only */
> + *sec_hash_matches &= 0x5555;
> + break;
> +#endif /* defined(__SSE2__) */
> + default:
> + for (unsigned int i = 0; i < RTE_HASH_BUCKET_ENTRIES; i++) {
> + *prim_hash_matches |=
> + ((sig == prim_bkt->sig_current[i]) << (i << 1));
> + *sec_hash_matches |=
> + ((sig == sec_bkt->sig_current[i]) << (i << 1));
> + }
> + }
> +}
next prev parent reply other threads:[~2024-03-19 10:41 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-20 16:51 [PATCH v2 0/4] hash: add SVE support for bulk key lookup Yoan Picchi
2023-10-20 16:51 ` [PATCH v2 1/4] hash: pack the hitmask for hash in bulk lookup Yoan Picchi
2023-10-20 16:51 ` [PATCH v2 2/4] hash: optimize compare signature for NEON Yoan Picchi
2023-10-20 16:51 ` [PATCH v2 3/4] test/hash: check bulk lookup of keys after collision Yoan Picchi
2023-10-20 16:51 ` [PATCH v2 4/4] hash: add SVE support for bulk key lookup Yoan Picchi
2024-02-27 17:41 ` [PATCH v5 0/4] " Yoan Picchi
2024-02-27 17:42 ` [PATCH v5 1/4] hash: pack the hitmask for hash in bulk lookup Yoan Picchi
2024-02-27 17:42 ` [PATCH v5 2/4] hash: optimize compare signature for NEON Yoan Picchi
2024-02-27 17:42 ` [PATCH v5 3/4] test/hash: check bulk lookup of keys after collision Yoan Picchi
2024-02-27 17:42 ` [PATCH v5 4/4] hash: add SVE support for bulk key lookup Yoan Picchi
2024-02-28 10:56 ` Konstantin Ananyev
2024-02-28 14:48 ` Yoan Picchi
2024-03-04 13:35 ` Konstantin Ananyev
2024-03-05 15:36 ` Yoan Picchi
2024-03-11 23:21 ` [PATCH v6 0/4] " Yoan Picchi
2024-03-11 23:21 ` [PATCH v6 1/4] hash: pack the hitmask for hash in bulk lookup Yoan Picchi
2024-03-11 23:21 ` [PATCH v6 2/4] hash: optimize compare signature for NEON Yoan Picchi
2024-03-11 23:21 ` [PATCH v6 3/4] test/hash: check bulk lookup of keys after collision Yoan Picchi
2024-03-11 23:21 ` [PATCH v6 4/4] hash: add SVE support for bulk key lookup Yoan Picchi
2024-03-12 3:57 ` fengchengwen
2024-03-12 15:08 ` Yoan Picchi
2024-03-12 15:42 ` [PATCH v7 0/4] " Yoan Picchi
2024-03-12 15:42 ` [PATCH v7 1/4] hash: pack the hitmask for hash in bulk lookup Yoan Picchi
2024-03-19 10:41 ` Konstantin Ananyev [this message]
2024-03-19 13:09 ` Yoan Picchi
2024-03-19 13:25 ` Konstantin Ananyev
2024-03-19 16:09 ` Stephen Hemminger
2024-03-12 15:42 ` [PATCH v7 2/4] hash: optimize compare signature for NEON Yoan Picchi
2024-03-20 7:37 ` [EXTERNAL] " Pavan Nikhilesh Bhagavatula
2024-04-11 13:32 ` Yoan Picchi
2024-03-12 15:42 ` [PATCH v7 3/4] test/hash: check bulk lookup of keys after collision Yoan Picchi
2024-03-12 15:42 ` [PATCH v7 4/4] hash: add SVE support for bulk key lookup Yoan Picchi
2024-04-17 16:08 ` [PATCH v8 0/4] " Yoan Picchi
2024-04-17 16:08 ` [PATCH v8 1/4] hash: pack the hitmask for hash in bulk lookup Yoan Picchi
2024-04-17 18:12 ` Stephen Hemminger
2024-04-17 16:08 ` [PATCH v8 2/4] hash: optimize compare signature for NEON Yoan Picchi
2024-04-17 16:08 ` [PATCH v8 3/4] test/hash: check bulk lookup of keys after collision Yoan Picchi
2024-04-17 16:08 ` [PATCH v8 4/4] hash: add SVE support for bulk key lookup Yoan Picchi
2024-04-30 16:27 ` [PATCH v9 0/4] " Yoan Picchi
2024-04-30 16:27 ` [PATCH v9 1/4] hash: pack the hitmask for hash in bulk lookup Yoan Picchi
2024-04-30 16:27 ` [PATCH v9 2/4] hash: optimize compare signature for NEON Yoan Picchi
2024-04-30 16:27 ` [PATCH v9 3/4] test/hash: check bulk lookup of keys after collision Yoan Picchi
2024-04-30 16:27 ` [PATCH v9 4/4] hash: add SVE support for bulk key lookup Yoan Picchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28cff0e5ea404051acdcb71c567d9d7c@huawei.com \
--to=konstantin.ananyev@huawei.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=nathan.brown@arm.com \
--cc=nd@arm.com \
--cc=ruifeng.wang@arm.com \
--cc=sameh.gobriel@intel.com \
--cc=thomas@monjalon.net \
--cc=vladimir.medvedkin@intel.com \
--cc=yipeng1.wang@intel.com \
--cc=yoan.picchi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).