From: Shahaf Shuler <shahafs@mellanox.com>
To: ferruh.yigit@intel.com, jingjing.wu@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 10/10] app/testpmd: fix on the flight VLAN configuration
Date: Tue, 12 Dec 2017 14:52:54 +0200 [thread overview]
Message-ID: <0614d77f456768b3694e7f18c1c0cb7ee732f5e5.1513082773.git.shahafs@mellanox.com> (raw)
In-Reply-To: <cover.1513082773.git.shahafs@mellanox.com>
On ethdev there is an API to configure VLAN offloads after the port
was started and without reconfiguration of the port or queues.
In the current design of the application, when the Rx offloads are
changed (through "port config all" CLI command) the port configuration
is overwritten, therefore the configuration made for the VLAN is lost.
This patch is to address the issue by a configuration of each port Rx
offloads separately instead of using the global Rx config.
Fixes: 6dbb2b336586 ("app/testpmd: convert to new Ethdev Rx offloads API")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
app/test-pmd/cmdline.c | 217 +++++++++++++++++++++++---------------------
app/test-pmd/config.c | 27 ++++--
app/test-pmd/testpmd.c | 2 +-
3 files changed, 135 insertions(+), 111 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index d1b8dab..00a229a 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1577,34 +1577,38 @@ struct cmd_config_max_pkt_len_result {
__attribute__((unused)) void *data)
{
struct cmd_config_max_pkt_len_result *res = parsed_result;
- uint64_t rx_offloads = rx_mode.offloads;
+ portid_t pid;
if (!all_ports_stopped()) {
printf("Please stop all ports first\n");
return;
}
- if (!strcmp(res->name, "max-pkt-len")) {
- if (res->value < ETHER_MIN_LEN) {
- printf("max-pkt-len can not be less than %d\n",
- ETHER_MIN_LEN);
+ RTE_ETH_FOREACH_DEV(pid) {
+ struct rte_port *port = &ports[pid];
+ uint64_t rx_offloads = port->dev_conf.rxmode.offloads;
+
+ if (!strcmp(res->name, "max-pkt-len")) {
+ if (res->value < ETHER_MIN_LEN) {
+ printf("max-pkt-len can not be less than %d\n",
+ ETHER_MIN_LEN);
+ return;
+ }
+ if (res->value == port->dev_conf.rxmode.max_rx_pkt_len)
+ return;
+
+ port->dev_conf.rxmode.max_rx_pkt_len = res->value;
+ if (res->value > ETHER_MAX_LEN)
+ rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ else
+ rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
+ port->dev_conf.rxmode.offloads = rx_offloads;
+ } else {
+ printf("Unknown parameter\n");
return;
}
- if (res->value == rx_mode.max_rx_pkt_len)
- return;
-
- rx_mode.max_rx_pkt_len = res->value;
- if (res->value > ETHER_MAX_LEN)
- rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
- else
- rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
- } else {
- printf("Unknown parameter\n");
- return;
}
- rx_mode.offloads = rx_offloads;
-
init_port_config();
cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
@@ -1706,103 +1710,108 @@ struct cmd_config_rx_mode_flag {
__attribute__((unused)) void *data)
{
struct cmd_config_rx_mode_flag *res = parsed_result;
- uint64_t rx_offloads = rx_mode.offloads;
+ portid_t pid;
if (!all_ports_stopped()) {
printf("Please stop all ports first\n");
return;
}
- if (!strcmp(res->name, "crc-strip")) {
- if (!strcmp(res->value, "on"))
- rx_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
- else if (!strcmp(res->value, "off"))
- rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else if (!strcmp(res->name, "scatter")) {
- if (!strcmp(res->value, "on")) {
- rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
- } else if (!strcmp(res->value, "off")) {
- rx_offloads &= ~DEV_RX_OFFLOAD_SCATTER;
+ RTE_ETH_FOREACH_DEV(pid) {
+ struct rte_port *port;
+ uint64_t rx_offloads;
+
+ port = &ports[pid];
+ rx_offloads = port->dev_conf.rxmode.offloads;
+ if (!strcmp(res->name, "crc-strip")) {
+ if (!strcmp(res->value, "on"))
+ rx_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
+ else if (!strcmp(res->value, "off"))
+ rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "scatter")) {
+ if (!strcmp(res->value, "on")) {
+ rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
+ } else if (!strcmp(res->value, "off")) {
+ rx_offloads &= ~DEV_RX_OFFLOAD_SCATTER;
+ } else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "rx-cksum")) {
+ if (!strcmp(res->value, "on"))
+ rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
+ else if (!strcmp(res->value, "off"))
+ rx_offloads &= ~DEV_RX_OFFLOAD_CHECKSUM;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "rx-timestamp")) {
+ if (!strcmp(res->value, "on"))
+ rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
+ else if (!strcmp(res->value, "off"))
+ rx_offloads &= ~DEV_RX_OFFLOAD_TIMESTAMP;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "hw-vlan")) {
+ if (!strcmp(res->value, "on")) {
+ rx_offloads |= (DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_STRIP);
+ } else if (!strcmp(res->value, "off")) {
+ rx_offloads &= ~(DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_STRIP);
+ } else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "hw-vlan-filter")) {
+ if (!strcmp(res->value, "on"))
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
+ else if (!strcmp(res->value, "off"))
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "hw-vlan-strip")) {
+ if (!strcmp(res->value, "on"))
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
+ else if (!strcmp(res->value, "off"))
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "hw-vlan-extend")) {
+ if (!strcmp(res->value, "on"))
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
+ else if (!strcmp(res->value, "off"))
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
+ } else if (!strcmp(res->name, "drop-en")) {
+ if (!strcmp(res->value, "on"))
+ rx_drop_en = 1;
+ else if (!strcmp(res->value, "off"))
+ rx_drop_en = 0;
+ else {
+ printf("Unknown parameter\n");
+ return;
+ }
} else {
printf("Unknown parameter\n");
return;
}
- } else if (!strcmp(res->name, "rx-cksum")) {
- if (!strcmp(res->value, "on"))
- rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
- else if (!strcmp(res->value, "off"))
- rx_offloads &= ~DEV_RX_OFFLOAD_CHECKSUM;
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else if (!strcmp(res->name, "rx-timestamp")) {
- if (!strcmp(res->value, "on"))
- rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
- else if (!strcmp(res->value, "off"))
- rx_offloads &= ~DEV_RX_OFFLOAD_TIMESTAMP;
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else if (!strcmp(res->name, "hw-vlan")) {
- if (!strcmp(res->value, "on")) {
- rx_offloads |= (DEV_RX_OFFLOAD_VLAN_FILTER |
- DEV_RX_OFFLOAD_VLAN_STRIP);
- }
- else if (!strcmp(res->value, "off")) {
- rx_offloads &= ~(DEV_RX_OFFLOAD_VLAN_FILTER |
- DEV_RX_OFFLOAD_VLAN_STRIP);
- }
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else if (!strcmp(res->name, "hw-vlan-filter")) {
- if (!strcmp(res->value, "on"))
- rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
- else if (!strcmp(res->value, "off"))
- rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else if (!strcmp(res->name, "hw-vlan-strip")) {
- if (!strcmp(res->value, "on"))
- rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
- else if (!strcmp(res->value, "off"))
- rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP;
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else if (!strcmp(res->name, "hw-vlan-extend")) {
- if (!strcmp(res->value, "on"))
- rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
- else if (!strcmp(res->value, "off"))
- rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND;
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else if (!strcmp(res->name, "drop-en")) {
- if (!strcmp(res->value, "on"))
- rx_drop_en = 1;
- else if (!strcmp(res->value, "off"))
- rx_drop_en = 0;
- else {
- printf("Unknown parameter\n");
- return;
- }
- } else {
- printf("Unknown parameter\n");
- return;
+ port->dev_conf.rxmode.offloads = rx_offloads;
}
- rx_mode.offloads = rx_offloads;
init_port_config();
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 33848d8..3bb99ff 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -2664,21 +2664,26 @@ struct igb_ring_desc_16_bytes {
{
int diag;
int vlan_offload;
+ uint64_t port_rx_offloads = ports[port_id].dev_conf.rxmode.offloads;
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
vlan_offload = rte_eth_dev_get_vlan_offload(port_id);
- if (on)
+ if (on) {
vlan_offload |= ETH_VLAN_EXTEND_OFFLOAD;
- else
+ port_rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
+ } else {
vlan_offload &= ~ETH_VLAN_EXTEND_OFFLOAD;
+ port_rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND;
+ }
diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
if (diag < 0)
printf("rx_vlan_extend_set(port_pi=%d, on=%d) failed "
"diag=%d\n", port_id, on, diag);
+ ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
}
void
@@ -2686,21 +2691,26 @@ struct igb_ring_desc_16_bytes {
{
int diag;
int vlan_offload;
+ uint64_t port_rx_offloads = ports[port_id].dev_conf.rxmode.offloads;
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
vlan_offload = rte_eth_dev_get_vlan_offload(port_id);
- if (on)
+ if (on) {
vlan_offload |= ETH_VLAN_STRIP_OFFLOAD;
- else
+ port_rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
+ } else {
vlan_offload &= ~ETH_VLAN_STRIP_OFFLOAD;
+ port_rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP;
+ }
diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
if (diag < 0)
printf("rx_vlan_strip_set(port_pi=%d, on=%d) failed "
"diag=%d\n", port_id, on, diag);
+ ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
}
void
@@ -2722,21 +2732,26 @@ struct igb_ring_desc_16_bytes {
{
int diag;
int vlan_offload;
+ uint64_t port_rx_offloads = ports[port_id].dev_conf.rxmode.offloads;
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
vlan_offload = rte_eth_dev_get_vlan_offload(port_id);
- if (on)
+ if (on) {
vlan_offload |= ETH_VLAN_FILTER_OFFLOAD;
- else
+ port_rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
+ } else {
vlan_offload &= ~ETH_VLAN_FILTER_OFFLOAD;
+ port_rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
+ }
diag = rte_eth_dev_set_vlan_offload(port_id, vlan_offload);
if (diag < 0)
printf("rx_vlan_filter_set(port_pi=%d, on=%d) failed "
"diag=%d\n", port_id, on, diag);
+ ports[port_id].dev_conf.rxmode.offloads = port_rx_offloads;
}
int
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 3758410..48021bf 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -603,6 +603,7 @@ static int eth_event_callback(portid_t port_id,
port = &ports[pid];
/* Apply default Tx configuration for all ports */
port->dev_conf.txmode = tx_mode;
+ port->dev_conf.rxmode = rx_mode;
rte_eth_dev_info_get(pid, &port->dev_info);
if (numa_support) {
@@ -2113,7 +2114,6 @@ struct pmd_test_command {
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
- port->dev_conf.rxmode = rx_mode;
port->dev_conf.fdir_conf = fdir_conf;
if (nb_rxq > 1) {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
--
1.8.3.1
next prev parent reply other threads:[~2017-12-12 12:53 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-23 12:07 [dpdk-dev] [PATCH 0/5] convert testpmd to new ethdev offloads API Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 1/5] app/testpmd: convert to new Ethdev " Shahaf Shuler
2017-12-04 22:31 ` Ferruh Yigit
2017-12-05 6:39 ` Shahaf Shuler
2017-12-06 22:57 ` Ferruh Yigit
2017-12-07 7:55 ` Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 2/5] app/testpmd: remove txqflags Shahaf Shuler
2017-12-04 22:31 ` Ferruh Yigit
2017-12-05 6:48 ` Shahaf Shuler
2017-12-06 23:04 ` Ferruh Yigit
2017-12-07 7:56 ` Shahaf Shuler
2017-12-12 12:45 ` Maciej Czekaj
2017-12-13 7:25 ` Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 3/5] app/testpmd: add command line option for multiseg Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 4/5] app/testpmd: add command line option for mbuf fast free Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 5/5] app/testpmd: enforce offloads caps Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 00/10] convert testpmd to new ethdev offloads API Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 01/10] app/testpmd: fix port configuration print Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 02/10] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 03/10] app/testpmd: support check of single port stop Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 04/10] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-05 18:11 ` Maciej Czekaj
2018-01-07 15:24 ` Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 05/10] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-09 5:32 ` Lu, Wenzhuo
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 06/10] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 07/10] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 08/10] app/testpmd: remove txqflags Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 09/10] app/testpmd: enforce offloads caps Shahaf Shuler
2017-12-12 12:52 ` Shahaf Shuler [this message]
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 00/10] convert testpmd to new ethdev offloads API Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 01/10] app/testpmd: fix port configuration print Shahaf Shuler
2018-01-05 3:33 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 02/10] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2018-01-09 3:05 ` Lu, Wenzhuo
2018-01-19 19:30 ` Patil, Harish
2018-01-20 19:29 ` Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 03/10] app/testpmd: support check of single port stop Shahaf Shuler
2018-01-09 3:20 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 04/10] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-09 5:27 ` Lu, Wenzhuo
2018-01-09 6:47 ` Shahaf Shuler
2018-01-09 7:13 ` Lu, Wenzhuo
2018-01-09 10:02 ` Shahaf Shuler
2018-01-09 11:37 ` Lu, Wenzhuo
2018-01-09 12:14 ` Ananyev, Konstantin
2018-01-10 0:37 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 05/10] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-09 5:35 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 06/10] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2018-01-09 6:30 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 07/10] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 08/10] app/testpmd: remove txqflags Shahaf Shuler
2018-01-09 7:17 ` Lu, Wenzhuo
2018-01-09 10:07 ` Shahaf Shuler
2018-01-09 11:51 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 09/10] app/testpmd: enforce offloads caps Shahaf Shuler
2018-01-09 7:48 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 10/10] app/testpmd: fix on the flight VLAN configuration Shahaf Shuler
2018-01-09 8:05 ` Lu, Wenzhuo
2018-01-09 10:03 ` Shahaf Shuler
2018-01-09 11:44 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 00/11] convert testpmd to new ethdev offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 01/11] app/testpmd: fix port configuration print Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 02/11] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 03/11] app/testpmd: support check of single port stop Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 04/11] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 05/11] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 06/11] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 07/11] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2018-01-15 3:06 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 08/11] app/testpmd: remove txqflags Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 09/11] app/testpmd: enforce offloads caps Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 10/11] app/testpmd: adjust on the flight VLAN configuration Shahaf Shuler
2018-01-15 3:30 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 11/11] app/testpmd: enable fast free Tx offload by default Shahaf Shuler
2018-01-15 3:33 ` Lu, Wenzhuo
2018-01-15 10:00 ` [dpdk-dev] [PATCH v4 00/11] convert testpmd to new ethdev offloads API Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0614d77f456768b3694e7f18c1c0cb7ee732f5e5.1513082773.git.shahafs@mellanox.com \
--to=shahafs@mellanox.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).