DPDK patches and discussions
 help / color / mirror / Atom feed
From: Yongseok Koh <yskoh@mellanox.com>
To: ferruh.yigit@intel.com
Cc: dev@dpdk.org, adrien.mazarguil@6wind.com,
	nelio.laranjeiro@6wind.com, Yongseok Koh <yskoh@mellanox.com>
Subject: [dpdk-dev] [PATCH v3 4/5] net/mlx5: select Rx/Tx callbacks when starting device
Date: Wed,  5 Jul 2017 11:12:27 -0700	[thread overview]
Message-ID: <0a63bddc25e2446c0f07bbb10397fabce733ac54.1499278209.git.yskoh@mellanox.com> (raw)
In-Reply-To: <cover.1499278209.git.yskoh@mellanox.com>

The callbacks are global to a device but the seletion is made every queue
configuration, which is redundant.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
---
 drivers/net/mlx5/mlx5_ethdev.c  | 23 +++++++++++------------
 drivers/net/mlx5/mlx5_rxq.c     |  2 --
 drivers/net/mlx5/mlx5_trigger.c |  3 +++
 drivers/net/mlx5/mlx5_txq.c     |  2 --
 4 files changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 96bccd5fd..4a77eac50 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -923,8 +923,6 @@ mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	struct priv *priv = dev->data->dev_private;
 	int ret = 0;
 	unsigned int i;
-	uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
-		mlx5_rx_burst;
 	unsigned int max_frame_len;
 	int rehash;
 	int restart = priv->started;
@@ -944,7 +942,7 @@ mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	/* Temporarily replace RX handler with a fake one, assuming it has not
 	 * been copied elsewhere. */
 	dev->rx_pkt_burst = removed_rx_burst;
-	/* Make sure everyone has left mlx5_rx_burst() and uses
+	/* Make sure everyone has left dev->rx_pkt_burst() and uses
 	 * removed_rx_burst() instead. */
 	rte_wmb();
 	usleep(1000);
@@ -1018,17 +1016,13 @@ mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 		/* Double fault, disable RX. */
 		break;
 	}
-	/*
-	 * Use a safe RX burst function in case of error, otherwise mimic
-	 * mlx5_dev_start().
-	 */
+	/* Mimic mlx5_dev_start(). */
 	if (ret) {
 		ERROR("unable to reconfigure RX queues, RX disabled");
-		rx_func = removed_rx_burst;
 	} else if (restart &&
-		 !rehash &&
-		 !priv_create_hash_rxqs(priv) &&
-		 !priv_rehash_flows(priv)) {
+		   !rehash &&
+		   !priv_create_hash_rxqs(priv) &&
+		   !priv_rehash_flows(priv)) {
 		if (dev->data->dev_conf.fdir_conf.mode == RTE_FDIR_MODE_NONE)
 			priv_fdir_enable(priv);
 		priv_dev_interrupt_handler_install(priv, dev);
@@ -1036,7 +1030,12 @@ mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
 	priv->mtu = mtu;
 	/* Burst functions can now be called again. */
 	rte_wmb();
-	dev->rx_pkt_burst = rx_func;
+	/*
+	 * Use a safe RX burst function in case of error, otherwise select RX
+	 * burst function again.
+	 */
+	if (!ret)
+		priv_select_rx_function(priv);
 out:
 	priv_unlock(priv);
 	assert(ret >= 0);
diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index 22be999e8..98b20eb92 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -1226,8 +1226,6 @@ mlx5_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 		DEBUG("%p: adding RX queue %p to list",
 		      (void *)dev, (void *)rxq_ctrl);
 		(*priv->rxqs)[idx] = &rxq_ctrl->rxq;
-		/* Update receive callback. */
-		priv_select_rx_function(priv);
 	}
 	priv_unlock(priv);
 	return -ret;
diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index 40f23da93..595a9e064 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -72,6 +72,9 @@ mlx5_dev_start(struct rte_eth_dev *dev)
 		priv_unlock(priv);
 		return 0;
 	}
+	/* Update Rx/Tx callback. */
+	priv_select_tx_function(priv);
+	priv_select_rx_function(priv);
 	DEBUG("%p: allocating and configuring hash RX queues", (void *)dev);
 	err = priv_create_hash_rxqs(priv);
 	if (!err)
diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
index ac9dfc5f0..03e23f58d 100644
--- a/drivers/net/mlx5/mlx5_txq.c
+++ b/drivers/net/mlx5/mlx5_txq.c
@@ -496,8 +496,6 @@ mlx5_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
 		DEBUG("%p: adding TX queue %p to list",
 		      (void *)dev, (void *)txq_ctrl);
 		(*priv->txqs)[idx] = &txq_ctrl->txq;
-		/* Update send callback. */
-		priv_select_tx_function(priv);
 	}
 	priv_unlock(priv);
 	return -ret;
-- 
2.11.0

  parent reply	other threads:[~2017-07-05 18:12 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-28 23:03 [dpdk-dev] [PATCH 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-06-28 23:03 ` [dpdk-dev] [PATCH 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-06-30 12:20   ` Nélio Laranjeiro
2017-06-28 23:04 ` [dpdk-dev] [PATCH 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-06-30 12:30   ` Nélio Laranjeiro
2017-06-30 12:43     ` Nélio Laranjeiro
2017-06-30 17:49       ` Yongseok Koh
2017-06-28 23:04 ` [dpdk-dev] [PATCH 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-06-30 13:01   ` Nélio Laranjeiro
2017-06-30 18:58     ` Yongseok Koh
2017-06-28 23:04 ` [dpdk-dev] [PATCH 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-06-30 13:02   ` Nélio Laranjeiro
2017-06-28 23:04 ` [dpdk-dev] [PATCH 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-06-30 19:23 ` [dpdk-dev] [PATCH v2 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-06-30 19:23   ` [dpdk-dev] [PATCH v2 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-03 13:48     ` Nélio Laranjeiro
2017-06-30 19:23   ` [dpdk-dev] [PATCH v2 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-03 13:58     ` Nélio Laranjeiro
2017-06-30 19:23   ` [dpdk-dev] [PATCH v2 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-03 14:06     ` Nélio Laranjeiro
2017-07-03 20:54       ` Yongseok Koh
2017-07-04  6:54         ` Nélio Laranjeiro
2017-06-30 19:23   ` [dpdk-dev] [PATCH v2 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-03 13:49     ` Nélio Laranjeiro
2017-06-30 19:23   ` [dpdk-dev] [PATCH v2 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-07-03 23:54     ` Thomas Monjalon
2017-07-04  8:58     ` Nélio Laranjeiro
2017-07-05  0:38       ` Yongseok Koh
2017-07-05  8:21         ` Nélio Laranjeiro
2017-07-05 17:41           ` Yongseok Koh
2017-06-30 21:28   ` [dpdk-dev] [PATCH v2 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Bruce Richardson
2017-07-05 18:12 ` [dpdk-dev] [PATCH v3 " Yongseok Koh
2017-07-05 18:12   ` [dpdk-dev] [PATCH v3 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-05 18:12   ` [dpdk-dev] [PATCH v3 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-05 18:12   ` [dpdk-dev] [PATCH v3 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-05 18:12   ` Yongseok Koh [this message]
2017-07-06  7:17     ` [dpdk-dev] [PATCH v3 4/5] net/mlx5: select Rx/Tx callbacks when starting device Nélio Laranjeiro
2017-07-05 18:12   ` [dpdk-dev] [PATCH v3 5/5] net/mlx5: add vectorized Rx/Tx burst for SSE4.1 Yongseok Koh
2017-07-05 22:58     ` Yongseok Koh
2017-07-06  7:16     ` Nélio Laranjeiro
2017-07-06  9:58     ` Ferruh Yigit
2017-07-06 18:41 ` [dpdk-dev] [PATCH v4 0/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-07-06 18:41   ` [dpdk-dev] [PATCH v4 1/5] net/mlx5: change indexing for Tx SW ring Yongseok Koh
2017-07-06 18:41   ` [dpdk-dev] [PATCH v4 2/5] net/mlx5: free buffers in bulk on Tx completion Yongseok Koh
2017-07-06 18:41   ` [dpdk-dev] [PATCH v4 3/5] net/mlx5: use buffer address for LKEY search Yongseok Koh
2017-07-06 18:41   ` [dpdk-dev] [PATCH v4 4/5] net/mlx5: select Rx/Tx callbacks when starting device Yongseok Koh
2017-07-06 18:41   ` [dpdk-dev] [PATCH v4 5/5] net/mlx5: add vectorized Rx/Tx burst for x86 Yongseok Koh
2017-07-07  9:58   ` [dpdk-dev] [PATCH v4 0/5] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0a63bddc25e2446c0f07bbb10397fabce733ac54.1499278209.git.yskoh@mellanox.com \
    --to=yskoh@mellanox.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=nelio.laranjeiro@6wind.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).