From: Jiayu Hu <jiayu.hu@intel.com>
To: dev@dpdk.org
Cc: konstantin.ananyev@intel.com, jianfeng.tan@intel.com,
yliu@fridaylinux.org, stephen@networkplumber.org,
jingjing.wu@intel.com, tiwei.bie@intel.com, lei.a.yao@intel.com,
Jiayu Hu <jiayu.hu@intel.com>
Subject: [dpdk-dev] [PATCH v8 3/3] app/testpmd: enable TCP/IPv4 GRO
Date: Thu, 29 Jun 2017 18:59:00 +0800 [thread overview]
Message-ID: <1498733940-117800-4-git-send-email-jiayu.hu@intel.com> (raw)
In-Reply-To: <1498733940-117800-1-git-send-email-jiayu.hu@intel.com>
This patch enables TCP/IPv4 GRO library in csum forwarding engine.
By default, GRO is turned off. Users can use command "gro (on|off)
(port_id)" to enable or disable GRO for a given port. If a port is
enabled GRO, all TCP/IPv4 packets received from the port are performed
GRO. Besides, users can set max flow number and packets number per-flow
by command "gro set (max_flow_num) (max_item_num_per_flow) (port_id)".
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
---
app/test-pmd/cmdline.c | 125 ++++++++++++++++++++++++++++
app/test-pmd/config.c | 37 ++++++++
app/test-pmd/csumonly.c | 5 ++
app/test-pmd/testpmd.c | 3 +
app/test-pmd/testpmd.h | 11 +++
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 34 ++++++++
6 files changed, 215 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index ff8ffd2..cb359e1 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -76,6 +76,7 @@
#include <rte_devargs.h>
#include <rte_eth_ctrl.h>
#include <rte_flow.h>
+#include <rte_gro.h>
#include <cmdline_rdline.h>
#include <cmdline_parse.h>
@@ -419,6 +420,14 @@ static void cmd_help_long_parsed(void *parsed_result,
"tso show (portid)"
" Display the status of TCP Segmentation Offload.\n\n"
+ "gro (on|off) (port_id)"
+ " Enable or disable Generic Receive Offload in io"
+ " forward engine.\n\n"
+
+ "gro set (max_flow_num) (max_item_num_per_flow) (port_id)\n"
+ " Set max flow number and max packet number per-flow"
+ " for GRO.\n\n"
+
"set fwd (%s)\n"
" Set packet forwarding mode.\n\n"
@@ -3827,6 +3836,120 @@ cmdline_parse_inst_t cmd_tunnel_tso_show = {
},
};
+/* *** SET GRO FOR A PORT *** */
+struct cmd_gro_result {
+ cmdline_fixed_string_t cmd_keyword;
+ cmdline_fixed_string_t mode;
+ uint8_t port_id;
+};
+
+static void
+cmd_enable_gro_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_gro_result *res;
+
+ res = parsed_result;
+ setup_gro(res->mode, res->port_id);
+}
+
+cmdline_parse_token_string_t cmd_gro_keyword =
+ TOKEN_STRING_INITIALIZER(struct cmd_gro_result,
+ cmd_keyword, "gro");
+cmdline_parse_token_string_t cmd_gro_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_gro_result,
+ mode, "on#off");
+cmdline_parse_token_num_t cmd_gro_pid =
+ TOKEN_NUM_INITIALIZER(struct cmd_gro_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_enable_gro = {
+ .f = cmd_enable_gro_parsed,
+ .data = NULL,
+ .help_str = "gro (on|off) (port_id)",
+ .tokens = {
+ (void *)&cmd_gro_keyword,
+ (void *)&cmd_gro_mode,
+ (void *)&cmd_gro_pid,
+ NULL,
+ },
+};
+
+/* *** SET MAX FLOW NUMBER AND ITEM NUM PER FLOW FOR GRO *** */
+struct cmd_gro_set_result {
+ cmdline_fixed_string_t gro;
+ cmdline_fixed_string_t mode;
+ uint16_t flow_num;
+ uint16_t item_num_per_flow;
+ uint8_t port_id;
+};
+
+static void
+cmd_gro_set_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_gro_set_result *res = parsed_result;
+
+ if (port_id_is_invalid(res->port_id, ENABLED_WARN))
+ return;
+ if (test_done == 0) {
+ printf("Before set GRO flow_num and item_num_per_flow,"
+ " please stop forwarding first\n");
+ return;
+ }
+
+ if (!strcmp(res->mode, "set")) {
+ if (res->flow_num == 0)
+ printf("Invalid flow number. Revert to default value:"
+ " %u.\n", GRO_DEFAULT_FLOW_NUM);
+ else
+ gro_ports[res->port_id].param.max_flow_num =
+ res->flow_num;
+
+ if (res->item_num_per_flow == 0)
+ printf("Invalid item number per-flow. Revert"
+ " to default value:%u.\n",
+ GRO_DEFAULT_ITEM_NUM_PER_FLOW);
+ else
+ gro_ports[res->port_id].param.max_item_per_flow =
+ res->item_num_per_flow;
+ }
+}
+
+cmdline_parse_token_string_t cmd_gro_set_gro =
+ TOKEN_STRING_INITIALIZER(struct cmd_gro_set_result,
+ gro, "gro");
+cmdline_parse_token_string_t cmd_gro_set_mode =
+ TOKEN_STRING_INITIALIZER(struct cmd_gro_set_result,
+ mode, "set");
+cmdline_parse_token_num_t cmd_gro_set_flow_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_gro_set_result,
+ flow_num, UINT16);
+cmdline_parse_token_num_t cmd_gro_set_item_num_per_flow =
+ TOKEN_NUM_INITIALIZER(struct cmd_gro_set_result,
+ item_num_per_flow, UINT16);
+cmdline_parse_token_num_t cmd_gro_set_portid =
+ TOKEN_NUM_INITIALIZER(struct cmd_gro_set_result,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_gro_set = {
+ .f = cmd_gro_set_parsed,
+ .data = NULL,
+ .help_str = "gro set <max_flow_num> <max_item_num_per_flow> "
+ "<port_id>: set max flow number and max packet number per-flow "
+ "for GRO",
+ .tokens = {
+ (void *)&cmd_gro_set_gro,
+ (void *)&cmd_gro_set_mode,
+ (void *)&cmd_gro_set_flow_num,
+ (void *)&cmd_gro_set_item_num_per_flow,
+ (void *)&cmd_gro_set_portid,
+ NULL,
+ },
+};
+
/* *** ENABLE/DISABLE FLUSH ON RX STREAMS *** */
struct cmd_set_flush_rx {
cmdline_fixed_string_t set;
@@ -13732,6 +13855,8 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_tso_show,
(cmdline_parse_inst_t *)&cmd_tunnel_tso_set,
(cmdline_parse_inst_t *)&cmd_tunnel_tso_show,
+ (cmdline_parse_inst_t *)&cmd_enable_gro,
+ (cmdline_parse_inst_t *)&cmd_gro_set,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_rx,
(cmdline_parse_inst_t *)&cmd_link_flow_control_set_tx,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index b0b340e..a5285b0 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -71,6 +71,7 @@
#ifdef RTE_LIBRTE_BNXT_PMD
#include <rte_pmd_bnxt.h>
#endif
+#include <rte_gro.h>
#include "testpmd.h"
@@ -2414,6 +2415,42 @@ set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs)
tx_pkt_nb_segs = (uint8_t) nb_segs;
}
+void
+setup_gro(const char *mode, uint8_t port_id)
+{
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ printf("invalid port id %u\n", port_id);
+ return;
+ }
+ if (test_done == 0) {
+ printf("Before enable/disable GRO,"
+ " please stop forwarding first\n");
+ return;
+ }
+ if (strcmp(mode, "on") == 0) {
+ if (gro_ports[port_id].enable) {
+ printf("port %u has enabled GRO\n", port_id);
+ return;
+ }
+ gro_ports[port_id].enable = 1;
+ gro_ports[port_id].param.desired_gro_types = RTE_GRO_TCP_IPV4;
+ gro_ports[port_id].param.max_packet_size = UINT16_MAX;
+
+ if (gro_ports[port_id].param.max_flow_num == 0)
+ gro_ports[port_id].param.max_flow_num =
+ GRO_DEFAULT_FLOW_NUM;
+ if (gro_ports[port_id].param.max_item_per_flow == 0)
+ gro_ports[port_id].param.max_item_per_flow =
+ GRO_DEFAULT_ITEM_NUM_PER_FLOW;
+ } else {
+ if (gro_ports[port_id].enable == 0) {
+ printf("port %u has disabled GRO\n", port_id);
+ return;
+ }
+ gro_ports[port_id].enable = 0;
+ }
+}
+
char*
list_pkt_forwarding_modes(void)
{
diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 66fc9a0..178ad75 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -71,6 +71,7 @@
#include <rte_prefetch.h>
#include <rte_string_fns.h>
#include <rte_flow.h>
+#include <rte_gro.h>
#include "testpmd.h"
#define IP_DEFTTL 64 /* from RFC 1340. */
@@ -658,6 +659,10 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
nb_pkt_per_burst);
if (unlikely(nb_rx == 0))
return;
+ if (unlikely(gro_ports[fs->rx_port].enable))
+ nb_rx = rte_gro_reassemble_burst(pkts_burst,
+ nb_rx,
+ &(gro_ports[fs->rx_port].param));
#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index b29328a..ed27c7a 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -90,6 +90,7 @@
#ifdef RTE_LIBRTE_LATENCY_STATS
#include <rte_latencystats.h>
#endif
+#include <rte_gro.h>
#include "testpmd.h"
@@ -378,6 +379,8 @@ lcoreid_t bitrate_lcore_id;
uint8_t bitrate_enabled;
#endif
+struct gro_status gro_ports[RTE_MAX_ETHPORTS];
+
/* Forward function declarations */
static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
static void check_all_ports_link_status(uint32_t port_mask);
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 364502d..377d933 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -34,6 +34,8 @@
#ifndef _TESTPMD_H_
#define _TESTPMD_H_
+#include <rte_gro.h>
+
#define RTE_PORT_ALL (~(portid_t)0x0)
#define RTE_TEST_RX_DESC_MAX 2048
@@ -428,6 +430,14 @@ extern struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
extern uint32_t burst_tx_delay_time; /**< Burst tx delay time(us) for mac-retry. */
extern uint32_t burst_tx_retry_num; /**< Burst tx retry number for mac-retry. */
+#define GRO_DEFAULT_FLOW_NUM 4
+#define GRO_DEFAULT_ITEM_NUM_PER_FLOW DEF_PKT_BURST
+struct gro_status {
+ struct rte_gro_param param;
+ uint8_t enable;
+};
+extern struct gro_status gro_ports[RTE_MAX_ETHPORTS];
+
static inline unsigned int
lcore_num(void)
{
@@ -626,6 +636,7 @@ void get_2tuple_filter(uint8_t port_id, uint16_t index);
void get_5tuple_filter(uint8_t port_id, uint16_t index);
int rx_queue_id_is_invalid(queueid_t rxq_id);
int tx_queue_id_is_invalid(queueid_t txq_id);
+void setup_gro(const char *mode, uint8_t port_id);
/* Functions to manage the set of filtered Multicast MAC addresses */
void mcast_addr_add(uint8_t port_id, struct ether_addr *mc_addr);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 2b9a1ea..528c833 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -884,6 +884,40 @@ Display the status of TCP Segmentation Offload::
testpmd> tso show (port_id)
+gro
+~~~~~~~~
+
+Enable or disable GRO in ``csum`` forwarding engine::
+
+ testpmd> gro (on|off) (port_id)
+
+If enabled, the csum forwarding engine will perform GRO on the TCP/IPv4
+packets received from the given port.
+
+If disabled, packets received from the given port won't be performed
+GRO. By default, GRO is disabled for all ports.
+
+.. note::
+
+ When enable GRO for a port, TCP/IPv4 packets received from the port
+ will be performed GRO. After GRO, the merged packets are multi-segments.
+ But csum forwarding engine doesn't support to calculate TCP checksum
+ for multi-segment packets in SW. So please select TCP HW checksum
+ calculation for the port which GROed packets are transmitted to.
+
+gro set
+~~~~~~~~
+
+Set max flow number and max packet number per-flow for GRO::
+
+ testpmd> gro set (max_flow_num) (max_item_num_per_flow) (port_id)
+
+The product of ``max_flow_num`` and ``max_item_num_per_flow`` is the max
+number of packets a GRO table can store.
+
+If current packet number is greater than or equal to the max value, GRO
+will stop processing incoming packets.
+
mac_addr add
~~~~~~~~~~~~
--
2.7.4
next prev parent reply other threads:[~2017-06-29 10:57 UTC|newest]
Thread overview: 141+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-22 9:32 [dpdk-dev] [PATCH 0/2] lib: add TCP IPv4 GRO support Jiayu Hu
2017-03-22 9:32 ` [dpdk-dev] [PATCH 1/2] lib: add Generic Receive Offload support for TCP IPv4 packets Jiayu Hu
2017-03-22 9:32 ` [dpdk-dev] [PATCH 2/2] app/testpmd: provide TCP IPv4 GRO function in iofwd mode Jiayu Hu
[not found] ` <1B893F1B-4DA8-4F88-9583-8C0BAA570832@intel.com>
[not found] ` <20170323021502.GA114662@localhost.localdomain>
[not found] ` <C830A6FC-F440-4E68-AB4E-2FD502722E3F@intel.com>
[not found] ` <20170323062433.GA120139@localhost.localdomain>
[not found] ` <59AF69C657FD0841A61C55336867B5B066729E3F@IRSMSX103.ger.corp.intel.com>
[not found] ` <20170323102135.GA124301@localhost.localdomain>
[not found] ` <2601191342CEEE43887BDE71AB9772583FAD410A@IRSMSX109.ger.corp.intel.com>
2017-03-24 2:23 ` [dpdk-dev] [PATCH 0/2] lib: add TCP IPv4 GRO support Jiayu Hu
2017-03-24 6:18 ` Wiles, Keith
2017-03-24 7:22 ` Yuanhan Liu
2017-03-24 8:06 ` Jiayu Hu
2017-03-24 11:43 ` Ananyev, Konstantin
2017-03-24 14:37 ` Wiles, Keith
2017-03-24 14:59 ` Olivier Matz
2017-03-24 15:07 ` Wiles, Keith
2017-03-28 13:40 ` Wiles, Keith
2017-03-28 13:57 ` Hu, Jiayu
2017-03-28 16:06 ` Wiles, Keith
2017-03-29 10:47 ` Morten Brørup
2017-03-29 12:12 ` Wiles, Keith
2017-04-04 12:31 ` [dpdk-dev] [PATCH v2 0/3] support GRO in DPDK Jiayu Hu
2017-04-04 12:31 ` [dpdk-dev] [PATCH v2 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-04-04 12:31 ` [dpdk-dev] [PATCH v2 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-04-04 12:31 ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: enable GRO feature Jiayu Hu
2017-04-24 8:09 ` [dpdk-dev] [PATCH v3 0/3] support GRO in DPDK Jiayu Hu
2017-04-24 8:09 ` [dpdk-dev] [PATCH v3 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-05-22 9:19 ` Ananyev, Konstantin
2017-05-23 10:31 ` Jiayu Hu
2017-05-24 12:38 ` Ananyev, Konstantin
2017-05-26 7:26 ` Jiayu Hu
2017-05-26 23:10 ` Ananyev, Konstantin
2017-05-27 3:41 ` Jiayu Hu
2017-05-27 11:12 ` Ananyev, Konstantin
2017-05-27 14:09 ` Jiayu Hu
2017-05-27 16:51 ` Ananyev, Konstantin
2017-05-29 10:22 ` Hu, Jiayu
2017-05-29 12:18 ` Bruce Richardson
2017-05-30 14:10 ` Hu, Jiayu
2017-05-29 12:51 ` Ananyev, Konstantin
2017-05-30 5:29 ` Hu, Jiayu
2017-05-30 11:56 ` Ananyev, Konstantin
2017-04-24 8:09 ` [dpdk-dev] [PATCH v3 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-04-24 8:09 ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: enable GRO feature Jiayu Hu
2017-06-07 9:24 ` Wu, Jingjing
2017-06-07 11:08 ` [dpdk-dev] [PATCH v4 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-07 11:08 ` [dpdk-dev] [PATCH v4 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-07 11:08 ` [dpdk-dev] [PATCH v4 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-07 11:08 ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-18 7:21 ` [dpdk-dev] [PATCH v5 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-18 7:21 ` [dpdk-dev] [PATCH v5 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-19 4:03 ` Tiwei Bie
2017-06-19 5:16 ` Jiayu Hu
2017-06-19 15:43 ` Tan, Jianfeng
2017-06-19 15:55 ` Stephen Hemminger
2017-06-20 1:48 ` Jiayu Hu
2017-06-18 7:21 ` [dpdk-dev] [PATCH v5 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-19 15:43 ` Tan, Jianfeng
2017-06-20 3:22 ` Jiayu Hu
2017-06-20 15:15 ` Ananyev, Konstantin
2017-06-20 16:16 ` Jiayu Hu
2017-06-20 15:21 ` Ananyev, Konstantin
2017-06-20 23:30 ` Tan, Jianfeng
2017-06-20 23:55 ` Stephen Hemminger
2017-06-22 7:39 ` Jiayu Hu
2017-06-22 8:18 ` Jiayu Hu
2017-06-22 9:35 ` Tan, Jianfeng
2017-06-22 13:55 ` Jiayu Hu
2017-06-18 7:21 ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-19 1:24 ` Yao, Lei A
2017-06-19 2:27 ` Wu, Jingjing
2017-06-19 3:22 ` Jiayu Hu
2017-06-19 1:39 ` [dpdk-dev] [PATCH v5 0/3] Support TCP/IPv4 GRO in DPDK Tan, Jianfeng
2017-06-19 3:07 ` Jiayu Hu
2017-06-19 5:12 ` Jiayu Hu
2017-06-23 14:43 ` [dpdk-dev] [PATCH v6 " Jiayu Hu
2017-06-23 14:43 ` [dpdk-dev] [PATCH v6 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-25 16:53 ` Tan, Jianfeng
2017-06-23 14:43 ` [dpdk-dev] [PATCH v6 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-25 16:53 ` Tan, Jianfeng
2017-06-26 1:58 ` Jiayu Hu
2017-06-23 14:43 ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-24 8:01 ` Yao, Lei A
2017-06-25 16:03 ` [dpdk-dev] [PATCH v6 0/3] Support TCP/IPv4 GRO in DPDK Tan, Jianfeng
2017-06-26 1:35 ` Jiayu Hu
2017-06-26 6:43 ` [dpdk-dev] [PATCH v7 " Jiayu Hu
2017-06-26 6:43 ` [dpdk-dev] [PATCH v7 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-27 23:42 ` Ananyev, Konstantin
2017-06-28 2:17 ` Jiayu Hu
2017-06-28 17:41 ` Ananyev, Konstantin
2017-06-29 1:19 ` Jiayu Hu
2017-06-26 6:43 ` [dpdk-dev] [PATCH v7 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-28 23:56 ` Ananyev, Konstantin
2017-06-29 2:26 ` Jiayu Hu
2017-06-30 12:07 ` Ananyev, Konstantin
2017-06-30 15:40 ` Hu, Jiayu
2017-06-26 6:43 ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-06-29 10:58 ` [dpdk-dev] [PATCH v8 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-29 10:58 ` [dpdk-dev] [PATCH v8 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-29 10:58 ` [dpdk-dev] [PATCH v8 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-29 17:51 ` Stephen Hemminger
2017-06-30 2:07 ` Jiayu Hu
2017-06-29 10:59 ` Jiayu Hu [this message]
2017-06-30 2:26 ` [dpdk-dev] [PATCH v8 3/3] app/testpmd: enable TCP/IPv4 GRO Wu, Jingjing
2017-06-30 6:53 ` [dpdk-dev] [PATCH v9 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-06-30 6:53 ` [dpdk-dev] [PATCH v9 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-06-30 6:53 ` [dpdk-dev] [PATCH v9 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-06-30 6:53 ` [dpdk-dev] [PATCH v9 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-01 11:08 ` [dpdk-dev] [PATCH v10 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-01 11:08 ` [dpdk-dev] [PATCH v10 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-02 10:19 ` Tan, Jianfeng
2017-07-03 5:56 ` Hu, Jiayu
2017-07-04 8:11 ` Yuanhan Liu
2017-07-04 8:37 ` Yuanhan Liu
2017-07-04 16:01 ` Hu, Jiayu
2017-07-01 11:08 ` [dpdk-dev] [PATCH v10 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-02 10:19 ` Tan, Jianfeng
2017-07-03 5:13 ` Hu, Jiayu
2017-07-04 9:03 ` Yuanhan Liu
2017-07-04 16:03 ` Hu, Jiayu
2017-07-01 11:08 ` [dpdk-dev] [PATCH v10 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-05 4:08 ` [dpdk-dev] [PATCH v11 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-05 4:08 ` [dpdk-dev] [PATCH v11 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-07 6:55 ` Tan, Jianfeng
2017-07-07 9:19 ` Tan, Jianfeng
2017-07-05 4:08 ` [dpdk-dev] [PATCH v11 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-07 6:55 ` Tan, Jianfeng
2017-07-05 4:08 ` [dpdk-dev] [PATCH v11 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-07 10:39 ` [dpdk-dev] [PATCH v12 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-07 10:39 ` [dpdk-dev] [PATCH v12 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-08 16:37 ` Tan, Jianfeng
2017-07-07 10:39 ` [dpdk-dev] [PATCH v12 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-08 16:37 ` Tan, Jianfeng
2017-07-07 10:39 ` [dpdk-dev] [PATCH v12 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-09 1:13 ` [dpdk-dev] [PATCH v13 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-09 1:13 ` [dpdk-dev] [PATCH v13 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-09 1:13 ` [dpdk-dev] [PATCH v13 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-09 1:13 ` [dpdk-dev] [PATCH v13 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-09 5:46 ` [dpdk-dev] [PATCH v14 0/3] Support TCP/IPv4 GRO in DPDK Jiayu Hu
2017-07-09 5:46 ` [dpdk-dev] [PATCH v14 1/3] lib: add Generic Receive Offload API framework Jiayu Hu
2017-07-09 5:46 ` [dpdk-dev] [PATCH v14 2/3] lib/gro: add TCP/IPv4 GRO support Jiayu Hu
2017-07-09 5:46 ` [dpdk-dev] [PATCH v14 3/3] app/testpmd: enable TCP/IPv4 GRO Jiayu Hu
2017-07-09 7:59 ` Yao, Lei A
2017-07-09 16:14 ` [dpdk-dev] [PATCH v14 0/3] Support TCP/IPv4 GRO in DPDK Thomas Monjalon
2017-07-10 2:21 ` Hu, Jiayu
2017-07-10 7:03 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1498733940-117800-4-git-send-email-jiayu.hu@intel.com \
--to=jiayu.hu@intel.com \
--cc=dev@dpdk.org \
--cc=jianfeng.tan@intel.com \
--cc=jingjing.wu@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=lei.a.yao@intel.com \
--cc=stephen@networkplumber.org \
--cc=tiwei.bie@intel.com \
--cc=yliu@fridaylinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).