DPDK patches and discussions
 help / color / mirror / Atom feed
From: "lihuisong (C)" <lihuisong@huawei.com>
To: <dev@dpdk.org>
Cc: <thomas@monjalon.net>, <ferruh.yigit@amd.com>,
	<aman.deep.singh@intel.com>, <yuying.zhang@intel.com>,
	<zhichaox.zeng@intel.com>
Subject: Re: [PATCH v2] app/testpmd: fix UDP cksum error for UFO enable
Date: Fri, 20 Oct 2023 11:38:14 +0800	[thread overview]
Message-ID: <29abe708-e42b-a775-e742-87ecf1cd05d5@huawei.com> (raw)
In-Reply-To: <20230802025520.8000-1-lihuisong@huawei.com>

kindly ping.

在 2023/8/2 10:55, Huisong Li 写道:
> The command "tso set <tso_segsz> <port_id>" is used to enable UFO, please
> see commit ce8e6e742807 ("app/testpmd: support UFO in checksum engine")
>
> The above patch configures the RTE_MBUF_F_TX_UDP_SEG to enable UFO only if
> tso_segsz is set. Then tx_prepare() may call rte_net_intel_cksum_prepare()
> to compute pseudo header checksum (because some PMDs may supports TSO).
> As a result, if the peer sends UDP packets, all packets with UDP checksum
> error are received for the PMDs only supported TSO.
>
> So enabling UFO also depends on if driver has RTE_ETH_TX_OFFLOAD_UDP_TSO
> capability. Similarly, TSO also need to do like this.
>
> In addition, this patch also fixes cmd_tso_set_parsed() for UFO to make
> it better to support TSO and UFO.
>
> Fixes: ce8e6e742807 ("app/testpmd: support UFO in checksum engine")
>
> Signed-off-by: Huisong Li <lihuisong@huawei.com>
> ---
>   v2: add handle for tunnel TSO offload in process_inner_cksums
>
> ---
>   app/test-pmd/cmdline.c  | 47 +++++++++++++++++++++--------------------
>   app/test-pmd/csumonly.c | 11 ++++++++--
>   2 files changed, 33 insertions(+), 25 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 0d0723f659..8be593d405 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -4906,6 +4906,7 @@ cmd_tso_set_parsed(void *parsed_result,
>   {
>   	struct cmd_tso_set_result *res = parsed_result;
>   	struct rte_eth_dev_info dev_info;
> +	uint64_t offloads;
>   	int ret;
>   
>   	if (port_id_is_invalid(res->port_id, ENABLED_WARN))
> @@ -4922,37 +4923,37 @@ cmd_tso_set_parsed(void *parsed_result,
>   	if (ret != 0)
>   		return;
>   
> -	if ((ports[res->port_id].tso_segsz != 0) &&
> -		(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) == 0) {
> -		fprintf(stderr, "Error: TSO is not supported by port %d\n",
> -			res->port_id);
> -		return;
> +	if (ports[res->port_id].tso_segsz != 0) {
> +		if ((dev_info.tx_offload_capa & (RTE_ETH_TX_OFFLOAD_TCP_TSO |
> +					RTE_ETH_TX_OFFLOAD_UDP_TSO)) == 0) {
> +			fprintf(stderr, "Error: both TSO and UFO are not supported by port %d\n",
> +				res->port_id);
> +			return;
> +		}
> +		/* display warnings if configuration is not supported by the NIC */
> +		if ((dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) == 0)
> +			fprintf(stderr, "Warning: port %d doesn't support TSO\n",
> +				res->port_id);
> +		if ((dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_UDP_TSO) == 0)
> +			fprintf(stderr, "Warning: port %d doesn't support UFO\n",
> +				res->port_id);
>   	}
>   
>   	if (ports[res->port_id].tso_segsz == 0) {
>   		ports[res->port_id].dev_conf.txmode.offloads &=
> -						~RTE_ETH_TX_OFFLOAD_TCP_TSO;
> -		printf("TSO for non-tunneled packets is disabled\n");
> +			~(RTE_ETH_TX_OFFLOAD_TCP_TSO | RTE_ETH_TX_OFFLOAD_UDP_TSO);
> +		printf("TSO and UFO for non-tunneled packets is disabled\n");
>   	} else {
> -		ports[res->port_id].dev_conf.txmode.offloads |=
> -						RTE_ETH_TX_OFFLOAD_TCP_TSO;
> -		printf("TSO segment size for non-tunneled packets is %d\n",
> +		offloads = (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) ?
> +					RTE_ETH_TX_OFFLOAD_TCP_TSO : 0;
> +		offloads |= (dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_UDP_TSO) ?
> +					RTE_ETH_TX_OFFLOAD_UDP_TSO : 0;
> +		ports[res->port_id].dev_conf.txmode.offloads |= offloads;
> +		printf("segment size for non-tunneled packets is %d\n",
>   			ports[res->port_id].tso_segsz);
>   	}
> -	cmd_config_queue_tx_offloads(&ports[res->port_id]);
> -
> -	/* display warnings if configuration is not supported by the NIC */
> -	ret = eth_dev_info_get_print_err(res->port_id, &dev_info);
> -	if (ret != 0)
> -		return;
> -
> -	if ((ports[res->port_id].tso_segsz != 0) &&
> -		(dev_info.tx_offload_capa & RTE_ETH_TX_OFFLOAD_TCP_TSO) == 0) {
> -		fprintf(stderr,
> -			"Warning: TSO enabled but not supported by port %d\n",
> -			res->port_id);
> -	}
>   
> +	cmd_config_queue_tx_offloads(&ports[res->port_id]);
>   	cmd_reconfig_device_queue(res->port_id, 1, 1);
>   }
>   
> diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
> index c103e54111..21210aff43 100644
> --- a/app/test-pmd/csumonly.c
> +++ b/app/test-pmd/csumonly.c
> @@ -466,6 +466,12 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
>   	uint64_t ol_flags = 0;
>   	uint32_t max_pkt_len, tso_segsz = 0;
>   	uint16_t l4_off;
> +	uint64_t all_tunnel_tso = RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO |
> +				RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO |
> +				RTE_ETH_TX_OFFLOAD_IPIP_TNL_TSO |
> +				RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO |
> +				RTE_ETH_TX_OFFLOAD_IP_TNL_TSO |
> +				RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO;
>   
>   	/* ensure packet is large enough to require tso */
>   	if (!info->is_tunnel) {
> @@ -505,7 +511,7 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
>   		udp_hdr = (struct rte_udp_hdr *)((char *)l3_hdr + info->l3_len);
>   		/* do not recalculate udp cksum if it was 0 */
>   		if (udp_hdr->dgram_cksum != 0) {
> -			if (tso_segsz)
> +			if (tso_segsz && (tx_offloads & RTE_ETH_TX_OFFLOAD_UDP_TSO))
>   				ol_flags |= RTE_MBUF_F_TX_UDP_SEG;
>   			else if (tx_offloads & RTE_ETH_TX_OFFLOAD_UDP_CKSUM) {
>   				ol_flags |= RTE_MBUF_F_TX_UDP_CKSUM;
> @@ -528,7 +534,8 @@ process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info *info,
>   #endif
>   	} else if (info->l4_proto == IPPROTO_TCP) {
>   		tcp_hdr = (struct rte_tcp_hdr *)((char *)l3_hdr + info->l3_len);
> -		if (tso_segsz)
> +		if (tso_segsz &&
> +		    (tx_offloads & (RTE_ETH_TX_OFFLOAD_TCP_TSO | all_tunnel_tso)))
>   			ol_flags |= RTE_MBUF_F_TX_TCP_SEG;
>   		else if (tx_offloads & RTE_ETH_TX_OFFLOAD_TCP_CKSUM) {
>   			ol_flags |= RTE_MBUF_F_TX_TCP_CKSUM;

  reply	other threads:[~2023-10-20  3:38 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-28  2:13 [PATCH] " Huisong Li
2023-08-02  2:55 ` [PATCH v2] " Huisong Li
2023-10-20  3:38   ` lihuisong (C) [this message]
2023-10-27  6:15   ` fengchengwen
2023-11-03  1:31   ` Ferruh Yigit
2023-11-03  9:09     ` lihuisong (C)
2023-11-03 10:42       ` Ferruh Yigit
2023-11-06  4:13         ` lihuisong (C)
2023-11-06 10:09           ` Ferruh Yigit
2023-11-06 12:29             ` lihuisong (C)
2023-11-07  4:11 ` [PATCH v3 0/2] " Huisong Li
2023-11-07  4:11   ` [PATCH v3 1/2] app/testpmd: remove useless code for TSO setting command Huisong Li
2023-11-07  4:11   ` [PATCH v3 2/2] app/testpmd: fix UDP cksum error for UFO enable Huisong Li
2023-11-07  9:54   ` [PATCH v3 0/2] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=29abe708-e42b-a775-e742-87ecf1cd05d5@huawei.com \
    --to=lihuisong@huawei.com \
    --cc=aman.deep.singh@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@amd.com \
    --cc=thomas@monjalon.net \
    --cc=yuying.zhang@intel.com \
    --cc=zhichaox.zeng@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).