From: Shahaf Shuler <shahafs@mellanox.com>
To: ferruh.yigit@intel.com, jingjing.wu@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 02/10] app/testpmd: convert to new Ethdev Rx offloads API
Date: Tue, 12 Dec 2017 14:52:46 +0200 [thread overview]
Message-ID: <6dbb2b336586025af6d1c054b450cadd4b008664.1513082773.git.shahafs@mellanox.com> (raw)
In-Reply-To: <cover.1513082773.git.shahafs@mellanox.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
Convert the application to use the new API. The is no functionality
changes rather simple conversion of the flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
---
app/test-pmd/cmdline.c | 51 +++++++++++++++++++++++-------------------
app/test-pmd/config.c | 36 +++++++++++++++++++----------
app/test-pmd/parameters.c | 32 +++++++++++++-------------
app/test-pmd/testpmd.c | 19 +++++++---------
4 files changed, 77 insertions(+), 61 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index f71d963..d8c73a9 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1577,6 +1577,7 @@ struct cmd_config_max_pkt_len_result {
__attribute__((unused)) void *data)
{
struct cmd_config_max_pkt_len_result *res = parsed_result;
+ uint64_t rx_offloads = rx_mode.offloads;
if (!all_ports_stopped()) {
printf("Please stop all ports first\n");
@@ -1594,14 +1595,16 @@ struct cmd_config_max_pkt_len_result {
rx_mode.max_rx_pkt_len = res->value;
if (res->value > ETHER_MAX_LEN)
- rx_mode.jumbo_frame = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
else
- rx_mode.jumbo_frame = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
} else {
printf("Unknown parameter\n");
return;
}
+ rx_mode.offloads = rx_offloads;
+
init_port_config();
cmd_reconfig_device_queue(RTE_PORT_ALL, 1, 1);
@@ -1703,6 +1706,7 @@ struct cmd_config_rx_mode_flag {
__attribute__((unused)) void *data)
{
struct cmd_config_rx_mode_flag *res = parsed_result;
+ uint64_t rx_offloads = rx_mode.offloads;
if (!all_ports_stopped()) {
printf("Please stop all ports first\n");
@@ -1711,48 +1715,48 @@ struct cmd_config_rx_mode_flag {
if (!strcmp(res->name, "crc-strip")) {
if (!strcmp(res->value, "on"))
- rx_mode.hw_strip_crc = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_CRC_STRIP;
else if (!strcmp(res->value, "off"))
- rx_mode.hw_strip_crc = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
else {
printf("Unknown parameter\n");
return;
}
} else if (!strcmp(res->name, "scatter")) {
- if (!strcmp(res->value, "on"))
- rx_mode.enable_scatter = 1;
- else if (!strcmp(res->value, "off"))
- rx_mode.enable_scatter = 0;
- else {
+ if (!strcmp(res->value, "on")) {
+ rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
+ } else if (!strcmp(res->value, "off")) {
+ rx_offloads &= ~DEV_RX_OFFLOAD_SCATTER;
+ } else {
printf("Unknown parameter\n");
return;
}
} else if (!strcmp(res->name, "rx-cksum")) {
if (!strcmp(res->value, "on"))
- rx_mode.hw_ip_checksum = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
else if (!strcmp(res->value, "off"))
- rx_mode.hw_ip_checksum = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_CHECKSUM;
else {
printf("Unknown parameter\n");
return;
}
} else if (!strcmp(res->name, "rx-timestamp")) {
if (!strcmp(res->value, "on"))
- rx_mode.hw_timestamp = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
else if (!strcmp(res->value, "off"))
- rx_mode.hw_timestamp = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_TIMESTAMP;
else {
printf("Unknown parameter\n");
return;
}
} else if (!strcmp(res->name, "hw-vlan")) {
if (!strcmp(res->value, "on")) {
- rx_mode.hw_vlan_filter = 1;
- rx_mode.hw_vlan_strip = 1;
+ rx_offloads |= (DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_STRIP);
}
else if (!strcmp(res->value, "off")) {
- rx_mode.hw_vlan_filter = 0;
- rx_mode.hw_vlan_strip = 0;
+ rx_offloads &= ~(DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_STRIP);
}
else {
printf("Unknown parameter\n");
@@ -1760,27 +1764,27 @@ struct cmd_config_rx_mode_flag {
}
} else if (!strcmp(res->name, "hw-vlan-filter")) {
if (!strcmp(res->value, "on"))
- rx_mode.hw_vlan_filter = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
else if (!strcmp(res->value, "off"))
- rx_mode.hw_vlan_filter = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
else {
printf("Unknown parameter\n");
return;
}
} else if (!strcmp(res->name, "hw-vlan-strip")) {
if (!strcmp(res->value, "on"))
- rx_mode.hw_vlan_strip = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
else if (!strcmp(res->value, "off"))
- rx_mode.hw_vlan_strip = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP;
else {
printf("Unknown parameter\n");
return;
}
} else if (!strcmp(res->name, "hw-vlan-extend")) {
if (!strcmp(res->value, "on"))
- rx_mode.hw_vlan_extend = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND;
else if (!strcmp(res->value, "off"))
- rx_mode.hw_vlan_extend = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND;
else {
printf("Unknown parameter\n");
return;
@@ -1798,6 +1802,7 @@ struct cmd_config_rx_mode_flag {
printf("Unknown parameter\n");
return;
}
+ rx_mode.offloads = rx_offloads;
init_port_config();
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 8a2d30c..2fdc051 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -540,14 +540,12 @@ struct rss_type_info {
void
port_offload_cap_display(portid_t port_id)
{
- struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
static const char *info_border = "************";
if (port_id_is_invalid(port_id, ENABLED_WARN))
return;
- dev = &rte_eth_devices[port_id];
rte_eth_dev_info_get(port_id, &dev_info);
printf("\n%s Port %d supported offload features: %s\n",
@@ -555,7 +553,8 @@ struct rss_type_info {
if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_VLAN_STRIP) {
printf("VLAN stripped: ");
- if (dev->data->dev_conf.rxmode.hw_vlan_strip)
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_VLAN_STRIP)
printf("on\n");
else
printf("off\n");
@@ -563,7 +562,8 @@ struct rss_type_info {
if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_QINQ_STRIP) {
printf("Double VLANs stripped: ");
- if (dev->data->dev_conf.rxmode.hw_vlan_extend)
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_VLAN_EXTEND)
printf("on\n");
else
printf("off\n");
@@ -571,7 +571,8 @@ struct rss_type_info {
if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_IPV4_CKSUM) {
printf("RX IPv4 checksum: ");
- if (dev->data->dev_conf.rxmode.hw_ip_checksum)
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_IPV4_CKSUM)
printf("on\n");
else
printf("off\n");
@@ -579,7 +580,8 @@ struct rss_type_info {
if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_UDP_CKSUM) {
printf("RX UDP checksum: ");
- if (dev->data->dev_conf.rxmode.hw_ip_checksum)
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_UDP_CKSUM)
printf("on\n");
else
printf("off\n");
@@ -587,18 +589,26 @@ struct rss_type_info {
if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_TCP_CKSUM) {
printf("RX TCP checksum: ");
- if (dev->data->dev_conf.rxmode.hw_ip_checksum)
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_TCP_CKSUM)
printf("on\n");
else
printf("off\n");
}
- if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM)
- printf("RX Outer IPv4 checksum: on");
+ if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM) {
+ printf("RX Outer IPv4 checksum: ");
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM)
+ printf("on\n");
+ else
+ printf("off\n");
+ }
if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_TCP_LRO) {
printf("Large receive offload: ");
- if (dev->data->dev_conf.rxmode.enable_lro)
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_TCP_LRO)
printf("on\n");
else
printf("off\n");
@@ -615,7 +625,8 @@ struct rss_type_info {
if (dev_info.rx_offload_capa & DEV_RX_OFFLOAD_TIMESTAMP) {
printf("HW timestamp: ");
- if (dev->data->dev_conf.rxmode.hw_timestamp)
+ if (ports[port_id].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_TIMESTAMP)
printf("on\n");
else
printf("off\n");
@@ -1675,7 +1686,8 @@ struct igb_ring_desc_16_bytes {
printf(" port %d:\n", (unsigned int)pid);
printf(" CRC stripping %s\n",
- ports[pid].dev_conf.rxmode.hw_strip_crc ?
+ (ports[pid].dev_conf.rxmode.offloads &
+ DEV_RX_OFFLOAD_CRC_STRIP) ?
"enabled" : "disabled");
printf(" RX queues=%d - RX desc=%d - RX free threshold=%d\n",
nb_rxq, nb_rxd, rx_conf->rx_free_thresh);
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 84e7a63..263651c 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -566,6 +566,8 @@
char **argvopt;
int opt_idx;
enum { TX, RX };
+ /* Default Rx offloads for all ports. */
+ uint64_t rx_offloads = rx_mode.offloads;
static struct option lgopts[] = {
{ "help", 0, 0, 0 },
@@ -804,7 +806,8 @@
if (n >= ETHER_MIN_LEN) {
rx_mode.max_rx_pkt_len = (uint32_t) n;
if (n > ETHER_MAX_LEN)
- rx_mode.jumbo_frame = 1;
+ rx_offloads |=
+ DEV_RX_OFFLOAD_JUMBO_FRAME;
} else
rte_exit(EXIT_FAILURE,
"Invalid max-pkt-len=%d - should be > %d\n",
@@ -897,34 +900,30 @@
}
#endif
if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
- rx_mode.hw_strip_crc = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_CRC_STRIP;
if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
- rx_mode.enable_lro = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_TCP_LRO;
if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
- rx_mode.enable_scatter = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_SCATTER;
if (!strcmp(lgopts[opt_idx].name, "enable-rx-cksum"))
- rx_mode.hw_ip_checksum = 1;
+ rx_offloads |= DEV_RX_OFFLOAD_CHECKSUM;
if (!strcmp(lgopts[opt_idx].name,
"enable-rx-timestamp"))
- rx_mode.hw_timestamp = 1;
-
- if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan")) {
- rx_mode.hw_vlan_filter = 0;
- rx_mode.hw_vlan_strip = 0;
- rx_mode.hw_vlan_extend = 0;
- }
+ rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP;
+ if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan"))
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN;
if (!strcmp(lgopts[opt_idx].name,
"disable-hw-vlan-filter"))
- rx_mode.hw_vlan_filter = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER;
if (!strcmp(lgopts[opt_idx].name,
"disable-hw-vlan-strip"))
- rx_mode.hw_vlan_strip = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP;
if (!strcmp(lgopts[opt_idx].name,
"disable-hw-vlan-extend"))
- rx_mode.hw_vlan_extend = 0;
+ rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND;
if (!strcmp(lgopts[opt_idx].name, "enable-drop-en"))
rx_drop_en = 1;
@@ -1140,4 +1139,7 @@
break;
}
}
+
+ /* Set offload configuration from command line parameters. */
+ rx_mode.offloads = rx_offloads;
}
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index c3ab448..6785b09 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -338,15 +338,10 @@ struct fwd_engine * fwd_engines[] = {
*/
struct rte_eth_rxmode rx_mode = {
.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled. */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled. */
- .hw_vlan_filter = 1, /**< VLAN filtering enabled. */
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .hw_vlan_extend = 0, /**< Extended VLAN disabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
- .hw_strip_crc = 1, /**< CRC stripping by hardware enabled. */
- .hw_timestamp = 0, /**< HW timestamp enabled. */
+ .offloads = (DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_VLAN_STRIP |
+ DEV_RX_OFFLOAD_CRC_STRIP),
+ .ignore_offload_bitfield = 1,
};
struct rte_fdir_conf fdir_conf = {
@@ -1521,6 +1516,8 @@ static int eth_event_callback(portid_t port_id,
port->need_reconfig_queues = 1;
return -1;
}
+ /* Apply Rx offloads configuration */
+ port->rx_conf.offloads = port->dev_conf.rxmode.offloads;
/* setup rx queues */
for (qi = 0; qi < nb_rxq; qi++) {
if ((numa_support) &&
@@ -2252,7 +2249,7 @@ uint8_t port_is_bonding_slave(portid_t slave_pid)
retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
if (retval < 0)
return retval;
- port_conf.rxmode.hw_vlan_filter = 1;
+ port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
/**
* Write the configuration into the device.
@@ -2301,7 +2298,7 @@ uint8_t port_is_bonding_slave(portid_t slave_pid)
rxtx_port_config(rte_port);
/* VLAN filter */
- rte_port->dev_conf.rxmode.hw_vlan_filter = 1;
+ rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
for (i = 0; i < RTE_DIM(vlan_tags); i++)
rx_vft_set(pid, vlan_tags[i], 1);
--
1.8.3.1
next prev parent reply other threads:[~2017-12-12 12:53 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-23 12:07 [dpdk-dev] [PATCH 0/5] convert testpmd to new ethdev " Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 1/5] app/testpmd: convert to new Ethdev " Shahaf Shuler
2017-12-04 22:31 ` Ferruh Yigit
2017-12-05 6:39 ` Shahaf Shuler
2017-12-06 22:57 ` Ferruh Yigit
2017-12-07 7:55 ` Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 2/5] app/testpmd: remove txqflags Shahaf Shuler
2017-12-04 22:31 ` Ferruh Yigit
2017-12-05 6:48 ` Shahaf Shuler
2017-12-06 23:04 ` Ferruh Yigit
2017-12-07 7:56 ` Shahaf Shuler
2017-12-12 12:45 ` Maciej Czekaj
2017-12-13 7:25 ` Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 3/5] app/testpmd: add command line option for multiseg Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 4/5] app/testpmd: add command line option for mbuf fast free Shahaf Shuler
2017-11-23 12:08 ` [dpdk-dev] [PATCH 5/5] app/testpmd: enforce offloads caps Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 00/10] convert testpmd to new ethdev offloads API Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 01/10] app/testpmd: fix port configuration print Shahaf Shuler
2017-12-12 12:52 ` Shahaf Shuler [this message]
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 03/10] app/testpmd: support check of single port stop Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 04/10] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-05 18:11 ` Maciej Czekaj
2018-01-07 15:24 ` Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 05/10] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-09 5:32 ` Lu, Wenzhuo
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 06/10] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 07/10] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 08/10] app/testpmd: remove txqflags Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 09/10] app/testpmd: enforce offloads caps Shahaf Shuler
2017-12-12 12:52 ` [dpdk-dev] [PATCH v2 10/10] app/testpmd: fix on the flight VLAN configuration Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 00/10] convert testpmd to new ethdev offloads API Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 01/10] app/testpmd: fix port configuration print Shahaf Shuler
2018-01-05 3:33 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 02/10] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2018-01-09 3:05 ` Lu, Wenzhuo
2018-01-19 19:30 ` Patil, Harish
2018-01-20 19:29 ` Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 03/10] app/testpmd: support check of single port stop Shahaf Shuler
2018-01-09 3:20 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 04/10] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-09 5:27 ` Lu, Wenzhuo
2018-01-09 6:47 ` Shahaf Shuler
2018-01-09 7:13 ` Lu, Wenzhuo
2018-01-09 10:02 ` Shahaf Shuler
2018-01-09 11:37 ` Lu, Wenzhuo
2018-01-09 12:14 ` Ananyev, Konstantin
2018-01-10 0:37 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 05/10] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-09 5:35 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 06/10] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2018-01-09 6:30 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 07/10] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 08/10] app/testpmd: remove txqflags Shahaf Shuler
2018-01-09 7:17 ` Lu, Wenzhuo
2018-01-09 10:07 ` Shahaf Shuler
2018-01-09 11:51 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 09/10] app/testpmd: enforce offloads caps Shahaf Shuler
2018-01-09 7:48 ` Lu, Wenzhuo
2017-12-26 9:44 ` [dpdk-dev] [PATCH v3 10/10] app/testpmd: fix on the flight VLAN configuration Shahaf Shuler
2018-01-09 8:05 ` Lu, Wenzhuo
2018-01-09 10:03 ` Shahaf Shuler
2018-01-09 11:44 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 00/11] convert testpmd to new ethdev offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 01/11] app/testpmd: fix port configuration print Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 02/11] app/testpmd: convert to new Ethdev Rx offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 03/11] app/testpmd: support check of single port stop Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 04/11] app/testpmd: convert to new Ethdev Tx offloads API Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 05/11] app/testpmd: fix flowgen forwarding ol flags Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 06/11] app/testpmd: cleanup internal Tx offloads flags field Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 07/11] app/testpmd: add command line option for Tx offloads Shahaf Shuler
2018-01-15 3:06 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 08/11] app/testpmd: remove txqflags Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 09/11] app/testpmd: enforce offloads caps Shahaf Shuler
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 10/11] app/testpmd: adjust on the flight VLAN configuration Shahaf Shuler
2018-01-15 3:30 ` Lu, Wenzhuo
2018-01-10 9:09 ` [dpdk-dev] [PATCH v4 11/11] app/testpmd: enable fast free Tx offload by default Shahaf Shuler
2018-01-15 3:33 ` Lu, Wenzhuo
2018-01-15 10:00 ` [dpdk-dev] [PATCH v4 00/11] convert testpmd to new ethdev offloads API Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6dbb2b336586025af6d1c054b450cadd4b008664.1513082773.git.shahafs@mellanox.com \
--to=shahafs@mellanox.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jingjing.wu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).