DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Min Hu (Connor)" <humin29@huawei.com>
To: Chengchang Tang <tangchengchang@huawei.com>, <dev@dpdk.org>
Cc: <linuxarm@huawei.com>, <chas3@att.com>, <ferruh.yigit@intel.com>
Subject: Re: [dpdk-dev] [RFC 0/2] add Tx prepare support for bonding device
Date: Fri, 16 Apr 2021 19:12:59 +0800	[thread overview]
Message-ID: <89cb282e-dd01-62c0-a1ac-a945e952f042@huawei.com> (raw)
In-Reply-To: <1618571071-5927-1-git-send-email-tangchengchang@huawei.com>

Looks good to me.

在 2021/4/16 19:04, Chengchang Tang 写道:
> This patch add Tx prepare for bonding device.
> 
> Currently, the bonding driver has not implemented the callback of
> rte_eth_tx_prepare function. Therefore, the TX prepare function of the
> slave devices will never be invoked. When hardware offloading such as
> CKSUM and TSO are enabled for some drivers, tx_prepare needs to be used
> to adjust packets (for example, set correct pseudo packet headers).
> Otherwise, related offloading fails and even packets are sent
> incorrectly. Due to this limitation, the bonded device cannot use these
> HW offloading in the Tx direction.
> 
> Because packet sending algorithms are numerous and complex in bond PMD,
> it is hard to design the callback for rte_eth_tx_prepare. In this patch,
> the tx_prepare callback of bonding PMD is not implemented. Instead,
> rte_eth_tx_prepare has been called in tx_burst callback. And a global
> variable is introduced to control whether the bonded device need call
> the rte_eth_tx_prepare. If upper-layer users need to use some TX
> offloading that depend on tx_prepare , they should enable the preparation
> function. In this way, the bonded device will call the rte_eth_tx_prepare
> for the fast path packets in the tx_burst callback.
> 
> Chengchang Tang (2):
>    net/bonding: add Tx prepare for bonding
>    app/testpmd: add cmd for bonding Tx prepare
> 
>   app/test-pmd/cmdline.c                      | 66 +++++++++++++++++++++++++++++
>   doc/guides/testpmd_app_ug/testpmd_funcs.rst |  9 ++++
>   drivers/net/bonding/eth_bond_private.h      |  1 +
>   drivers/net/bonding/rte_eth_bond.h          | 29 +++++++++++++
>   drivers/net/bonding/rte_eth_bond_api.c      | 28 ++++++++++++
>   drivers/net/bonding/rte_eth_bond_pmd.c      | 33 +++++++++++++--
>   drivers/net/bonding/version.map             |  5 +++
>   7 files changed, 167 insertions(+), 4 deletions(-)
> 
> --
> 2.7.4
> 
> .
> 

  parent reply	other threads:[~2021-04-16 11:13 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-16 11:04 Chengchang Tang
2021-04-16 11:04 ` [dpdk-dev] [RFC 1/2] net/bonding: add Tx prepare for bonding Chengchang Tang
2021-04-16 11:04 ` [dpdk-dev] [RFC 2/2] app/testpmd: add cmd for bonding Tx prepare Chengchang Tang
2021-04-16 11:12 ` Min Hu (Connor) [this message]
2021-04-20  1:26 ` [dpdk-dev] [RFC 0/2] add Tx prepare support for bonding device Ferruh Yigit
2021-04-20  2:44   ` Chengchang Tang
2021-04-20  8:33     ` Ananyev, Konstantin
2021-04-20 12:44       ` Chengchang Tang
2021-04-20 13:18         ` Ananyev, Konstantin
2021-04-20 14:06           ` Chengchang Tang
2021-04-23  9:46 ` [dpdk-dev] [PATCH " Chengchang Tang
2021-04-23  9:46   ` [dpdk-dev] [PATCH 1/2] net/bonding: support Tx prepare for bonding Chengchang Tang
2021-06-08  9:49     ` Andrew Rybchenko
2021-06-09  6:42       ` Chengchang Tang
2021-06-09  9:35         ` Andrew Rybchenko
2021-06-10  7:32           ` Chengchang Tang
2021-06-14 14:16             ` Andrew Rybchenko
2021-06-09 10:25         ` Ananyev, Konstantin
2021-06-10  6:46           ` Chengchang Tang
2021-06-14 11:36             ` Ananyev, Konstantin
2022-05-24 12:11       ` Min Hu (Connor)
2022-07-25  4:08     ` [PATCH v2 0/3] add Tx prepare support for bonding driver Chengwen Feng
2022-07-25  4:08       ` [PATCH v2 1/3] net/bonding: support Tx prepare Chengwen Feng
2022-09-13 10:22         ` Ferruh Yigit
2022-09-13 15:08           ` Chas Williams
2022-09-14  0:46           ` fengchengwen
2022-09-14 16:59             ` Chas Williams
2022-09-17  2:35               ` fengchengwen
2022-09-17 13:38                 ` Chas Williams
2022-09-19 14:07                   ` Konstantin Ananyev
2022-09-19 23:02                     ` Chas Williams
2022-09-22  2:12                       ` fengchengwen
2022-09-25 10:32                         ` Chas Williams
2022-09-26 10:18                       ` Konstantin Ananyev
2022-09-26 16:36                         ` Chas Williams
2022-07-25  4:08       ` [PATCH v2 2/3] net/bonding: support Tx prepare fail stats Chengwen Feng
2022-07-25  4:08       ` [PATCH v2 3/3] net/bonding: add testpmd cmd for Tx prepare Chengwen Feng
2022-07-25  7:04       ` [PATCH v2 0/3] add Tx prepare support for bonding driver humin (Q)
2022-09-13  1:41       ` fengchengwen
2022-09-17  4:15     ` [PATCH v3 " Chengwen Feng
2022-09-17  4:15       ` [PATCH v3 1/3] net/bonding: support Tx prepare Chengwen Feng
2022-09-17  4:15       ` [PATCH v3 2/3] net/bonding: support Tx prepare fail stats Chengwen Feng
2022-09-17  4:15       ` [PATCH v3 3/3] net/bonding: add testpmd cmd for Tx prepare Chengwen Feng
2022-10-09  3:36     ` [PATCH v4] net/bonding: call Tx prepare before Tx burst Chengwen Feng
2022-10-10 19:42       ` Chas Williams
2022-10-11 13:28         ` fengchengwen
2022-10-11 13:20     ` [PATCH v5] " Chengwen Feng
2022-10-15 15:26       ` Chas Williams
2022-10-18 14:25         ` fengchengwen
2022-10-20  7:07         ` Andrew Rybchenko
2021-04-23  9:46   ` [dpdk-dev] [PATCH 2/2] net/bonding: support configuring Tx offloading for bonding Chengchang Tang
2021-06-08  9:49     ` Andrew Rybchenko
2021-06-09  6:57       ` Chengchang Tang
2021-06-09  9:11         ` Ananyev, Konstantin
2021-06-09  9:37           ` Andrew Rybchenko
2021-06-10  6:29             ` Chengchang Tang
2021-06-14 11:05               ` Ananyev, Konstantin
2021-06-14 14:13                 ` Andrew Rybchenko
2021-04-30  6:26   ` [dpdk-dev] [PATCH 0/2] add Tx prepare support for bonding device Chengchang Tang
2021-04-30  6:47     ` Min Hu (Connor)
2021-06-03  1:44   ` Chengchang Tang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=89cb282e-dd01-62c0-a1ac-a945e952f042@huawei.com \
    --to=humin29@huawei.com \
    --cc=chas3@att.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=linuxarm@huawei.com \
    --cc=tangchengchang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).