From: "Wang, ShougangX" <shougangx.wang@intel.com>
To: "Guo, Jia" <jia.guo@intel.com>, "Xie, WeiX" <weix.xie@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>
Cc: "Xing, Beilei" <beilei.xing@intel.com>,
"stable@dpdk.org" <stable@dpdk.org>,
"Di, ChenxuX" <chenxux.di@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2] net/i40e: fix incorrect hash look up table
Date: Wed, 22 Jul 2020 06:39:49 +0000 [thread overview]
Message-ID: <BYAPR11MB3477353AB01BE785DCD9F52D88790@BYAPR11MB3477.namprd11.prod.outlook.com> (raw)
In-Reply-To: <334f916e-1aad-264f-e073-6e737e78c767@intel.com>
Hi, Jeff
> -----Original Message-----
> From: Guo, Jia <jia.guo@intel.com>
> Sent: Wednesday, July 22, 2020 1:51 PM
> To: Xie, WeiX <weix.xie@intel.com>; Wang, ShougangX
> <shougangx.wang@intel.com>; dev@dpdk.org
> Cc: Xing, Beilei <beilei.xing@intel.com>; stable@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH v2] net/i40e: fix incorrect hash look up table
>
> hi, shougang
>
> On 7/21/2020 2:41 PM, Xie, WeiX wrote:
> > Tested-by: Zhang, XiX <xix.zhang@intel.com>
> >
> > Regards,
> > Xie Wei
> >
> >
> > -----Original Message-----
> > From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Shougang Wang
> > Sent: Tuesday, July 21, 2020 1:49 PM
> > To: dev@dpdk.org
> > Cc: Xing, Beilei <beilei.xing@intel.com>; Guo, Jia
> > <jia.guo@intel.com>; Wang, ShougangX <shougangx.wang@intel.com>;
> > stable@dpdk.org
> > Subject: [dpdk-dev] [PATCH v2] net/i40e: fix incorrect hash look up
> > table
> >
> > The hash look up table(LUT) will not be initializing when starting testpmd
> with --disable-rss. So that some invalid queue indexes may still in the LUT.
> When enable RSS by creating RSS rule, some packets will not be into the valid
> queues.
> > This patch fixes this issue by initializing the LUT when creating an RSS rule.
> >
> > Fixes: feaae285b342 ("net/i40e: support hash configuration in RSS
> > flow")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
> > ---
> > drivers/net/i40e/i40e_ethdev.c | 134 ++++++++++++++++-----------------
> > 1 file changed, 63 insertions(+), 71 deletions(-)
> >
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 393b5320f..e56543393 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -13070,6 +13070,55 @@ i40e_rss_conf_init(struct
> i40e_rte_flow_rss_conf *out,
> > return 0;
> > }
> >
> > +/* If conf is NULL, function will init hash LUT with default
> > +configration*/
>
>
> Please fix the checkpatch issue here.
>
>
> > static int i40e_rss_set_lut(struct i40e_pf *pf,
>
>
> In order to eliminate any confuse with current i40e_set_rss_lut, please
> change the name, such as "i40e_rss_lut_init" or other better naming.
>
Qi also gave me some comments. I will define i40e_rss_lut_init() to initialize the LUT.
>
> > + struct i40e_rte_flow_rss_conf *conf) {
> > + struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> > + uint32_t lut = 0;
> > + uint16_t j, num;
> > + uint32_t i;
> > +
> > + /* If both VMDQ and RSS enabled, not all of PF queues are
> configured.
> > + * It's necessary to calculate the actual PF queues that are configured.
> > + */
> > + if (pf->dev_data->dev_conf.rxmode.mq_mode &
> ETH_MQ_RX_VMDQ_FLAG)
> > + num = i40e_pf_calc_configured_queues_num(pf);
> > + else
> > + num = pf->dev_data->nb_rx_queues;
> > +
> > + if (conf == NULL)
> > + num = RTE_MIN(num, I40E_MAX_Q_PER_TC);
> > + else
> > + num = RTE_MIN(num, conf->conf.queue_num);
> > + PMD_DRV_LOG(INFO, "Max of contiguous %u PF queues are
> configured",
> > + num);
>
>
> Alignment should match open parenthesis.
>
>
> > +
> > + if (num == 0) {
> > + PMD_DRV_LOG(ERR,
> > + "No PF queues are configured to enable RSS for
> port %u",
> > + pf->dev_data->port_id);
> > + return -ENOTSUP;
> > + }
> > +
> > + /* Fill in redirection table */
> > + for (i = 0, j = 0; i < hw->func_caps.rss_table_size; i++, j++) {
> > + if (j == num)
> > + j = 0;
> > + if (conf == NULL)
> > + lut = (lut << 8) | (j & ((0x1 <<
> > + hw->func_caps.rss_table_entry_width) - 1));
> > + else
> > + lut = (lut << 8) | (conf->conf.queue[j] & ((0x1 <<
> > + hw->func_caps.rss_table_entry_width) - 1));
> > + if ((i & 3) == 3)
> > + I40E_WRITE_REG(hw, I40E_PFQF_HLUT(i >> 2), lut);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > /* Write HENA register to enable hash */ static int
> i40e_rss_hash_set(struct i40e_pf *pf, struct i40e_rte_flow_rss_conf
> *rss_conf) @@ -13318,12 +13367,24 @@ static int
> i40e_rss_enable_hash(struct i40e_pf *pf,
> > struct i40e_rte_flow_rss_conf *conf)
> > {
> > + enum rte_eth_rx_mq_mode mq_mode =
> > +pf->dev_data->dev_conf.rxmode.mq_mode;
> > struct i40e_rte_flow_rss_conf *rss_info = &pf->rss_info;
> > struct i40e_rte_flow_rss_conf rss_conf;
> > + int ret;
>
>
> Suggest set the 0 to ret and return ret at the end of this function, so
> ret could be use in all part.
>
>
> >
> > if (!(conf->conf.types & pf->adapter->flow_types_mask))
> > return -ENOTSUP;
> >
> > + /* If the RSS is disabled before this, the LUT is uninitialized.
> > + * So it is necessary to initialize it here.
> > + */
> > + if (!(mq_mode & ETH_MQ_RX_RSS_FLAG) && !pf-
> >rss_info.conf.queue_num &&
> > + !pf->adapter->rss_reta_updated) {
> > + ret = i40e_rss_set_lut(pf, NULL);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > memset(&rss_conf, 0, sizeof(rss_conf));
> > rte_memcpy(&rss_conf, conf, sizeof(rss_conf));
> >
> > @@ -13362,39 +13423,7 @@ static int
> > i40e_rss_config_queue_region(struct i40e_pf *pf,
> > struct i40e_rte_flow_rss_conf *conf)
> > {
> > - struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> > - uint32_t lut = 0;
> > - uint16_t j, num;
> > - uint32_t i;
> > -
> > - /* If both VMDQ and RSS enabled, not all of PF queues are
> configured.
> > - * It's necessary to calculate the actual PF queues that are configured.
> > - */
> > - if (pf->dev_data->dev_conf.rxmode.mq_mode &
> ETH_MQ_RX_VMDQ_FLAG)
> > - num = i40e_pf_calc_configured_queues_num(pf);
> > - else
> > - num = pf->dev_data->nb_rx_queues;
> > -
> > - num = RTE_MIN(num, conf->conf.queue_num);
> > - PMD_DRV_LOG(INFO, "Max of contiguous %u PF queues are
> configured",
> > - num);
> > -
> > - if (num == 0) {
> > - PMD_DRV_LOG(ERR,
> > - "No PF queues are configured to enable RSS for
> port %u",
> > - pf->dev_data->port_id);
> > - return -ENOTSUP;
> > - }
> > -
> > - /* Fill in redirection table */
> > - for (i = 0, j = 0; i < hw->func_caps.rss_table_size; i++, j++) {
> > - if (j == num)
> > - j = 0;
> > - lut = (lut << 8) | (conf->conf.queue[j] & ((0x1 <<
> > - hw->func_caps.rss_table_entry_width) - 1));
> > - if ((i & 3) == 3)
> > - I40E_WRITE_REG(hw, I40E_PFQF_HLUT(i >> 2), lut);
> > - }
> > + i40e_rss_set_lut(pf, conf);
> >
> > i40e_rss_mark_invalid_rule(pf, conf);
> >
> > @@ -13491,46 +13520,9 @@ i40e_rss_disable_hash(struct i40e_pf *pf,
> static int i40e_rss_clear_queue_region(struct i40e_pf *pf) {
> > - struct i40e_hw *hw = I40E_PF_TO_HW(pf);
> > struct i40e_rte_flow_rss_conf *rss_info = &pf->rss_info;
> > - uint16_t queue[I40E_MAX_Q_PER_TC];
> > - uint32_t num_rxq, i;
> > - uint32_t lut = 0;
> > - uint16_t j, num;
> > -
> > - num_rxq = RTE_MIN(pf->dev_data->nb_rx_queues,
> I40E_MAX_Q_PER_TC);
> >
> > - for (j = 0; j < num_rxq; j++)
> > - queue[j] = j;
> > -
> > - /* If both VMDQ and RSS enabled, not all of PF queues are
> configured.
> > - * It's necessary to calculate the actual PF queues that are configured.
> > - */
> > - if (pf->dev_data->dev_conf.rxmode.mq_mode &
> ETH_MQ_RX_VMDQ_FLAG)
> > - num = i40e_pf_calc_configured_queues_num(pf);
> > - else
> > - num = pf->dev_data->nb_rx_queues;
> > -
> > - num = RTE_MIN(num, num_rxq);
> > - PMD_DRV_LOG(INFO, "Max of contiguous %u PF queues are
> configured",
> > - num);
> > -
> > - if (num == 0) {
> > - PMD_DRV_LOG(ERR,
> > - "No PF queues are configured to enable RSS for
> port %u",
> > - pf->dev_data->port_id);
> > - return -ENOTSUP;
> > - }
> > -
> > - /* Fill in redirection table */
> > - for (i = 0, j = 0; i < hw->func_caps.rss_table_size; i++, j++) {
> > - if (j == num)
> > - j = 0;
> > - lut = (lut << 8) | (queue[j] & ((0x1 <<
> > - hw->func_caps.rss_table_entry_width) - 1));
> > - if ((i & 3) == 3)
> > - I40E_WRITE_REG(hw, I40E_PFQF_HLUT(i >> 2), lut);
> > - }
> > + i40e_rss_set_lut(pf, NULL);
>
>
> Need to check return value.
>
>
> >
> > rss_info->conf.queue_num = 0;
> > memset(&rss_info->conf.queue, 0, sizeof(uint16_t));
> > --
> > 2.17.1
> >
next prev parent reply other threads:[~2020-07-22 6:39 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 6:35 [dpdk-dev] [PATCH] " Shougang Wang
2020-07-15 9:07 ` Chen, BoX C
2020-07-18 4:07 ` Jeff Guo
2020-07-21 5:49 ` [dpdk-dev] [PATCH v2] " Shougang Wang
2020-07-21 6:41 ` Xie, WeiX
2020-07-22 5:50 ` Jeff Guo
2020-07-22 6:39 ` Wang, ShougangX [this message]
2020-07-22 5:31 ` Zhang, Qi Z
2020-07-22 6:20 ` Wang, ShougangX
2020-07-22 8:15 ` [dpdk-dev] [PATCH v3] " Shougang Wang
2020-07-23 1:57 ` Yang, Qiming
2020-07-23 12:53 ` Zhang, Qi Z
2020-07-24 2:34 ` Wang, ShougangX
2020-07-24 2:47 ` [dpdk-dev] [PATCH v4] " Shougang Wang
2020-07-24 3:57 ` Jeff Guo
2020-07-24 4:49 ` Wang, ShougangX
2020-07-24 5:07 ` Yang, Qiming
2020-07-24 5:42 ` Wang, ShougangX
2020-07-24 8:12 ` [dpdk-dev] [PATCH v5] " Shougang Wang
2020-07-24 9:00 ` Xie, WeiX
2020-07-24 9:38 ` [dpdk-dev] [PATCH v6] " Shougang Wang
2020-07-24 9:54 ` Jeff Guo
2020-07-24 9:58 ` Zhang, Qi Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR11MB3477353AB01BE785DCD9F52D88790@BYAPR11MB3477.namprd11.prod.outlook.com \
--to=shougangx.wang@intel.com \
--cc=beilei.xing@intel.com \
--cc=chenxux.di@intel.com \
--cc=dev@dpdk.org \
--cc=jia.guo@intel.com \
--cc=stable@dpdk.org \
--cc=weix.xie@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).