DPDK patches and discussions
 help / color / mirror / Atom feed
From: Christian Ehrhardt <christian.ehrhardt@canonical.com>
To: Luca Boccassi <bluca@debian.org>
Cc: dev <dev@dpdk.org>
Subject: Re: [dpdk-dev] [RFC] avoid libfdt checks adding full paths to pkg-config
Date: Wed, 2 Sep 2020 13:09:37 +0200	[thread overview]
Message-ID: <CAATJJ0+EVuF+Cqgfb=i7ZN3XnwP344s1GrJdDfbXELUMCtgT1g@mail.gmail.com> (raw)
In-Reply-To: <9bf44dac86b43740e608b8592a0696c07cc2afa8.camel@debian.org>

On Tue, Sep 1, 2020 at 6:16 PM Luca Boccassi <bluca@debian.org> wrote:
>
> On Tue, 2020-09-01 at 17:58 +0200, Christian Ehrhardt wrote:
> > The checks for libfdt try dependency() first which would only work if
> > a pkg-config would be present but libfdt has none.
> > Then it probes for the lib path itself via cc.find_library.
> >
> > But later it adds the result of either probe to ext_deps which ends up
> > in build and also the resulting pkg-config to contain toolchain versioned
> > paths in Libs.private like:
> >   /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libfdt.so
> > which obviously breaks on toolchain updates.
> >
> > In general libs used multiple times - ipn3ke + ifpga in this case - are
> > checked centrally in config/meson.build so move it there and fix the
> > adding of dependencies to not use the full file path.
> >
> > The result is libfdt in pkg-config now showing up as:
> >   Libs.private: -pthread -lm -ldl -lnuma -lfdt -lpcap
> >
> > Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
> > ---
> >  config/meson.build             | 9 +++++++++
> >  drivers/net/ipn3ke/meson.build | 6 +-----
> >  drivers/raw/ifpga/meson.build  | 7 +------
> >  3 files changed, 11 insertions(+), 11 deletions(-)
> >
> > diff --git a/config/meson.build b/config/meson.build
> > index cff8b33dd2..1c8317e750 100644
> > --- a/config/meson.build
> > +++ b/config/meson.build
> > @@ -150,6 +150,15 @@ if numa_dep.found() and cc.has_header('numaif.h')
> >       dpdk_extra_ldflags += '-lnuma'
> >  endif
> >
> > +has_libfdt = 0
> > +fdt_dep = cc.find_library('libfdt', required: false)
> > +if fdt_dep.found() and cc.has_header('fdt.h')
> > +     dpdk_conf.set10('RTE_HAS_LIBFDT', true)
> > +     has_libfdt = 1
> > +     add_project_link_arguments('-lfdt', language: 'c')
> > +     dpdk_extra_ldflags += '-lfdt'
> > +endif
> > +
> >  # check for libbsd
> >  libbsd = dependency('libbsd', required: false)
> >  if libbsd.found()
> > diff --git a/drivers/net/ipn3ke/meson.build b/drivers/net/ipn3ke/meson.build
> > index ec9cb7daf0..de6e03ca65 100644
> > --- a/drivers/net/ipn3ke/meson.build
> > +++ b/drivers/net/ipn3ke/meson.build
> > @@ -9,11 +9,7 @@
> >  #  rte_eth_switch_domain_free()
> >  #
> >
> > -dep = dependency('libfdt', required: false)
> > -if not dep.found()
> > -     dep = cc.find_library('libfdt', required: false)
> > -endif
> > -if not dep.found()
> > +if has_libnuma == 0
> >       build = false
> >       reason = 'missing dependency, "libfdt"'
> >       subdir_done()
> > diff --git a/drivers/raw/ifpga/meson.build b/drivers/raw/ifpga/meson.build
> > index 05a1711b5d..d4a128d67e 100644
> > --- a/drivers/raw/ifpga/meson.build
> > +++ b/drivers/raw/ifpga/meson.build
> > @@ -1,11 +1,7 @@
> >  # SPDX-License-Identifier: BSD-3-Clause
> >  # Copyright(c) 2018 Intel Corporation
> >
> > -dep = dependency('libfdt', required: false)
> > -if not dep.found()
> > -     dep = cc.find_library('libfdt', required: false)
> > -endif
> > -if not dep.found()
> > +if has_libnuma == 0
>
> if has_libfdt == 0 ? Same above
>
> >       build = false
> >       reason = 'missing dependency, "libfdt"'
> >       subdir_done()
> > @@ -16,7 +12,6 @@ objs = [base_objs]
> >
> >  deps += ['ethdev', 'rawdev', 'pci', 'bus_pci', 'kvargs',
> >       'bus_vdev', 'bus_ifpga', 'net', 'pmd_i40e', 'pmd_ipn3ke']
> > -ext_deps += dep
> >
> >  sources = files('ifpga_rawdev.c')
>
> With the above correction, LGTM.
>
> Reviewed-by: Luca Boccassi <bluca@debian.org>

Fixed and thanks Luca!
CI pipeline (Debian) is happy now.

I added your Reviewed-by and added Thomas/Bruce on --to since they
last modified these files on various meson cleanups.
Will resend the patch as non-RFC with those changes any minute ...

> --
> Kind regards,
> Luca Boccassi



-- 
Christian Ehrhardt
Staff Engineer, Ubuntu Server
Canonical Ltd

      reply	other threads:[~2020-09-02 11:10 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-01 15:58 Christian Ehrhardt
2020-09-01 16:10 ` Christian Ehrhardt
2020-09-01 16:16 ` Luca Boccassi
2020-09-02 11:09   ` Christian Ehrhardt [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAATJJ0+EVuF+Cqgfb=i7ZN3XnwP344s1GrJdDfbXELUMCtgT1g@mail.gmail.com' \
    --to=christian.ehrhardt@canonical.com \
    --cc=bluca@debian.org \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).