automatic DPDK test reports
 help / color / mirror / Atom feed
* [dpdk-test-report]  |FAILURE| pw62793[v5, 1/3] ethdev: support API to set max LRO packet size
@ 2019-11-12 10:42 sys_stv
  0 siblings, 0 replies; only message in thread
From: sys_stv @ 2019-11-12 10:42 UTC (permalink / raw)
  To: test-report

[-- Attachment #1: Type: text/plain, Size: 4429 bytes --]

Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/62793

_apply issues_

Submitter: Dekel Peled <dekelp@mellanox.com>
Date: 2019-11-08 16:42:27
Reply_mail: f1184cc375193d244855ec25c2dc057f1ab3d9e0.1573231011.git.dekelp@mellanox.com
DPDK git baseline:
	Repo:dpdk-next-net, CommitID: 31aa07759ecd151967b568b1f1aa12b7794217c8
	Repo:dpdk, CommitID: 31aa07759ecd151967b568b1f1aa12b7794217c8

*Repo: dpdk-next-net
/* LRO configurations structure. */
struct mlx5_lro_config {
	uint32_t supported:1; /* Whether LRO is supported. */

error: patch failed: drivers/net/mlx5/mlx5.h:206
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
	/* FIXME: we should ask the device for these values. */
	info->min_rx_bufsize = 32;
	info->max_rx_pktlen = 65536;
	/*
	 * Since we need one CQ per QP, the limit is the minimum number
	 * between the two values.

error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:606
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxq.c...
error: while searching for:
	return 0;
}
--
#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
#define MLX5_MAX_TCP_HDR_OFFSET ((unsigned int)(sizeof(struct rte_ether_hdr) + \
					sizeof(struct rte_vlan_hdr) * 2 + \
					sizeof(struct rte_ipv6_hdr)))

error: patch failed: drivers/net/mlx5/mlx5_rxq.c:1701
error: drivers/net/mlx5/mlx5_rxq.c: patch does not apply
Checking patch drivers/net/qede/qede_ethdev.c...
Hunk #1 succeeded at 1279 (offset 2 lines).
Checking patch drivers/net/virtio/virtio_ethdev.c...
Checking patch drivers/net/vmxnet3/vmxnet3_ethdev.c...
--

int
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
		      const struct rte_eth_conf *dev_conf)

error: patch failed: lib/librte_ethdev/rte_ethdev.c:1136
error: lib/librte_ethdev/rte_ethdev.c: patch does not apply
Checking patch lib/librte_ethdev/rte_ethdev.h...
error: while searching for:
	/** The multi-queue packet distribution mode to be used, e.g. RSS. */
	enum rte_eth_rx_mq_mode mq_mode;
	uint32_t max_rx_pkt_len;  /**< Only used if JUMBO_FRAME enabled. */
	uint16_t split_hdr_size;  /**< hdr buf size (header_split enabled).*/
	/**
	 * Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags.

error: patch failed: lib/librte_ethdev/rte_ethdev.h:395
error: lib/librte_ethdev/rte_ethdev.h: patch does not apply
*Repo: dpdk
/* LRO configurations structure. */
struct mlx5_lro_config {
	uint32_t supported:1; /* Whether LRO is supported. */

error: patch failed: drivers/net/mlx5/mlx5.h:206
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
	/* FIXME: we should ask the device for these values. */
	info->min_rx_bufsize = 32;
	info->max_rx_pktlen = 65536;
	/*
	 * Since we need one CQ per QP, the limit is the minimum number
	 * between the two values.

error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:606
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxq.c...
error: while searching for:
	return 0;
}
--
#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
#define MLX5_MAX_TCP_HDR_OFFSET ((unsigned int)(sizeof(struct rte_ether_hdr) + \
					sizeof(struct rte_vlan_hdr) * 2 + \
					sizeof(struct rte_ipv6_hdr)))

error: patch failed: drivers/net/mlx5/mlx5_rxq.c:1701
error: drivers/net/mlx5/mlx5_rxq.c: patch does not apply
Checking patch drivers/net/qede/qede_ethdev.c...
Hunk #1 succeeded at 1279 (offset 2 lines).
Checking patch drivers/net/virtio/virtio_ethdev.c...
Checking patch drivers/net/vmxnet3/vmxnet3_ethdev.c...
--

int
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
		      const struct rte_eth_conf *dev_conf)

error: patch failed: lib/librte_ethdev/rte_ethdev.c:1136
error: lib/librte_ethdev/rte_ethdev.c: patch does not apply
Checking patch lib/librte_ethdev/rte_ethdev.h...
error: while searching for:
	/** The multi-queue packet distribution mode to be used, e.g. RSS. */
	enum rte_eth_rx_mq_mode mq_mode;
	uint32_t max_rx_pkt_len;  /**< Only used if JUMBO_FRAME enabled. */
	uint16_t split_hdr_size;  /**< hdr buf size (header_split enabled).*/
	/**
	 * Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags.

error: patch failed: lib/librte_ethdev/rte_ethdev.h:395
error: lib/librte_ethdev/rte_ethdev.h: patch does not apply

DPDK STV team

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2019-11-12 10:42 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-12 10:42 [dpdk-test-report] |FAILURE| pw62793[v5, 1/3] ethdev: support API to set max LRO packet size sys_stv

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).