DPDK patches and discussions
 help / color / mirror / Atom feed
From: Timothy McDaniel <timothy.mcdaniel@intel.com>
Cc: dev@dpdk.org, erik.g.carrillo@intel.com, gage.eads@intel.com,
	harry.van.haaren@intel.com, jerinj@marvell.com,
	thomas@monjalon.net
Subject: [dpdk-dev] [PATCH v6 17/23] event/dlb2: add enqueue and its burst variants
Date: Fri, 30 Oct 2020 13:29:01 -0500	[thread overview]
Message-ID: <1604082547-16710-18-git-send-email-timothy.mcdaniel@intel.com> (raw)
In-Reply-To: <1604082547-16710-1-git-send-email-timothy.mcdaniel@intel.com>

Add support for enqueue and its variants.

Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
---
 doc/guides/eventdevs/dlb2.rst | 118 +++++++++
 drivers/event/dlb2/dlb2.c     | 578 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 696 insertions(+)

diff --git a/doc/guides/eventdevs/dlb2.rst b/doc/guides/eventdevs/dlb2.rst
index bbd6ac8..aa8bf01 100644
--- a/doc/guides/eventdevs/dlb2.rst
+++ b/doc/guides/eventdevs/dlb2.rst
@@ -163,6 +163,124 @@ Flow ID
 The flow ID field is preserved in the event when it is scheduled in the
 DLB2.
 
+Hardware Credits
+~~~~~~~~~~~~~~~~
+
+DLB2 uses a hardware credit scheme to prevent software from overflowing hardware
+event storage, with each unit of storage represented by a credit. A port spends
+a credit to enqueue an event, and hardware refills the ports with credits as the
+events are scheduled to ports. Refills come from credit pools, and each port is
+a member of a load-balanced credit pool and a directed credit pool. The
+load-balanced credits are used to enqueue to load-balanced queues, and directed
+credits are used for directed queues.
+
+A DLB2 eventdev contains one load-balanced and one directed credit pool. These
+pools' sizes are controlled by the nb_events_limit field in struct
+rte_event_dev_config. The load-balanced pool is sized to contain
+nb_events_limit credits, and the directed pool is sized to contain
+nb_events_limit/4 credits. The directed pool size can be overridden with the
+num_dir_credits vdev argument, like so:
+
+    .. code-block:: console
+
+       --vdev=dlb1_event,num_dir_credits=<value>
+
+This can be used if the default allocation is too low or too high for the
+specific application needs. The PMD also supports a vdev arg that limits the
+max_num_events reported by rte_event_dev_info_get():
+
+    .. code-block:: console
+
+       --vdev=dlb1_event,max_num_events=<value>
+
+By default, max_num_events is reported as the total available load-balanced
+credits. If multiple DLB2-based applications are being used, it may be desirable
+to control how many load-balanced credits each application uses, particularly
+when application(s) are written to configure nb_events_limit equal to the
+reported max_num_events.
+
+Each port is a member of both credit pools. A port's credit allocation is
+defined by its low watermark, high watermark, and refill quanta. These three
+parameters are calculated by the dlb PMD like so:
+
+- The load-balanced high watermark is set to the port's enqueue_depth.
+  The directed high watermark is set to the minimum of the enqueue_depth and
+  the directed pool size divided by the total number of ports.
+- The refill quanta is set to half the high watermark.
+- The low watermark is set to the minimum of 16 and the refill quanta.
+
+When the eventdev is started, each port is pre-allocated a high watermark's
+worth of credits. For example, if an eventdev contains four ports with enqueue
+depths of 32 and a load-balanced credit pool size of 4096, each port will start
+with 32 load-balanced credits, and there will be 3968 credits available to
+replenish the ports. Thus, a single port is not capable of enqueueing up to the
+nb_events_limit (without any events being dequeued), since the other ports are
+retaining their initial credit allocation; in short, all ports must enqueue in
+order to reach the limit.
+
+If a port attempts to enqueue and has no credits available, the enqueue
+operation will fail and the application must retry the enqueue. Credits are
+replenished asynchronously by the DLB2 hardware.
+
+Software Credits
+~~~~~~~~~~~~~~~~
+
+The DLB2 is a "closed system" event dev, and the DLB2 PMD layers a software
+credit scheme on top of the hardware credit scheme in order to comply with
+the per-port backpressure described in the eventdev API.
+
+The DLB2's hardware scheme is local to a queue/pipeline stage: a port spends a
+credit when it enqueues to a queue, and credits are later replenished after the
+events are dequeued and released.
+
+In the software credit scheme, a credit is consumed when a new (.op =
+RTE_EVENT_OP_NEW) event is injected into the system, and the credit is
+replenished when the event is released from the system (either explicitly with
+RTE_EVENT_OP_RELEASE or implicitly in dequeue_burst()).
+
+In this model, an event is "in the system" from its first enqueue into eventdev
+until it is last dequeued. If the event goes through multiple event queues, it
+is still considered "in the system" while a worker thread is processing it.
+
+A port will fail to enqueue if the number of events in the system exceeds its
+``new_event_threshold`` (specified at port setup time). A port will also fail
+to enqueue if it lacks enough hardware credits to enqueue; load-balanced
+credits are used to enqueue to a load-balanced queue, and directed credits are
+used to enqueue to a directed queue.
+
+The out-of-credit situations are typically transient, and an eventdev
+application using the DLB2 ought to retry its enqueues if they fail.
+If enqueue fails, DLB2 PMD sets rte_errno as follows:
+
+- -ENOSPC: Credit exhaustion (either hardware or software)
+- -EINVAL: Invalid argument, such as port ID, queue ID, or sched_type.
+
+Depending on the pipeline the application has constructed, it's possible to
+enter a credit deadlock scenario wherein the worker thread lacks the credit
+to enqueue an event, and it must dequeue an event before it can recover the
+credit. If the worker thread retries its enqueue indefinitely, it will not
+make forward progress. Such deadlock is possible if the application has event
+"loops", in which an event in dequeued from queue A and later enqueued back to
+queue A.
+
+Due to this, workers should stop retrying after a time, release the events it
+is attempting to enqueue, and dequeue more events. It is important that the
+worker release the events and don't simply set them aside to retry the enqueue
+again later, because the port has limited history list size (by default, twice
+the port's dequeue_depth).
+
+Priority
+~~~~~~~~
+
+The DLB2 supports event priority and per-port queue service priority, as
+described in the eventdev header file. The DLB2 does not support 'global' event
+queue priority established at queue creation time.
+
+DLB2 supports 8 event and queue service priority levels. For both priority
+types, the PMD uses the upper three bits of the priority field to determine the
+DLB2 priority, discarding the 5 least significant bits. The 5 least significant
+event priority bits are not preserved when an event is enqueued.
+
 Reconfiguration
 ~~~~~~~~~~~~~~~
 
diff --git a/drivers/event/dlb2/dlb2.c b/drivers/event/dlb2/dlb2.c
index 051836d..7d2cf76 100644
--- a/drivers/event/dlb2/dlb2.c
+++ b/drivers/event/dlb2/dlb2.c
@@ -2089,6 +2089,578 @@ dlb2_eventdev_start(struct rte_eventdev *dev)
 	return 0;
 }
 
+static uint8_t cmd_byte_map[DLB2_NUM_PORT_TYPES][DLB2_NUM_HW_SCHED_TYPES] = {
+	{
+		/* Load-balanced cmd bytes */
+		[RTE_EVENT_OP_NEW] = DLB2_NEW_CMD_BYTE,
+		[RTE_EVENT_OP_FORWARD] = DLB2_FWD_CMD_BYTE,
+		[RTE_EVENT_OP_RELEASE] = DLB2_COMP_CMD_BYTE,
+	},
+	{
+		/* Directed cmd bytes */
+		[RTE_EVENT_OP_NEW] = DLB2_NEW_CMD_BYTE,
+		[RTE_EVENT_OP_FORWARD] = DLB2_NEW_CMD_BYTE,
+		[RTE_EVENT_OP_RELEASE] = DLB2_NOOP_CMD_BYTE,
+	},
+};
+
+static inline uint32_t
+dlb2_port_credits_get(struct dlb2_port *qm_port,
+		      enum dlb2_hw_queue_types type)
+{
+	uint32_t credits = *qm_port->credit_pool[type];
+	uint32_t batch_size = DLB2_SW_CREDIT_BATCH_SZ;
+
+	if (unlikely(credits < batch_size))
+		batch_size = credits;
+
+	if (likely(credits &&
+		   __atomic_compare_exchange_n(
+			qm_port->credit_pool[type],
+			&credits, credits - batch_size, false,
+			__ATOMIC_SEQ_CST, __ATOMIC_SEQ_CST)))
+		return batch_size;
+	else
+		return 0;
+}
+
+static inline void
+dlb2_replenish_sw_credits(struct dlb2_eventdev *dlb2,
+			  struct dlb2_eventdev_port *ev_port)
+{
+	uint16_t quanta = ev_port->credit_update_quanta;
+
+	if (ev_port->inflight_credits >= quanta * 2) {
+		/* Replenish credits, saving one quanta for enqueues */
+		uint16_t val = ev_port->inflight_credits - quanta;
+
+		__atomic_fetch_sub(&dlb2->inflights, val, __ATOMIC_SEQ_CST);
+		ev_port->inflight_credits -= val;
+	}
+}
+
+static inline int
+dlb2_check_enqueue_sw_credits(struct dlb2_eventdev *dlb2,
+			      struct dlb2_eventdev_port *ev_port)
+{
+	uint32_t sw_inflights = __atomic_load_n(&dlb2->inflights,
+						__ATOMIC_SEQ_CST);
+	const int num = 1;
+
+	if (unlikely(ev_port->inflight_max < sw_inflights)) {
+		DLB2_INC_STAT(ev_port->stats.traffic.tx_nospc_inflight_max, 1);
+		rte_errno = -ENOSPC;
+		return 1;
+	}
+
+	if (ev_port->inflight_credits < num) {
+		/* check if event enqueue brings ev_port over max threshold */
+		uint32_t credit_update_quanta = ev_port->credit_update_quanta;
+
+		if (sw_inflights + credit_update_quanta >
+				dlb2->new_event_limit) {
+			DLB2_INC_STAT(
+			ev_port->stats.traffic.tx_nospc_new_event_limit,
+			1);
+			rte_errno = -ENOSPC;
+			return 1;
+		}
+
+		__atomic_fetch_add(&dlb2->inflights, credit_update_quanta,
+				   __ATOMIC_SEQ_CST);
+		ev_port->inflight_credits += (credit_update_quanta);
+
+		if (ev_port->inflight_credits < num) {
+			DLB2_INC_STAT(
+			ev_port->stats.traffic.tx_nospc_inflight_credits,
+			1);
+			rte_errno = -ENOSPC;
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static inline int
+dlb2_check_enqueue_hw_ldb_credits(struct dlb2_port *qm_port)
+{
+	if (unlikely(qm_port->cached_ldb_credits == 0)) {
+		qm_port->cached_ldb_credits =
+			dlb2_port_credits_get(qm_port,
+					      DLB2_LDB_QUEUE);
+		if (unlikely(qm_port->cached_ldb_credits == 0)) {
+			DLB2_INC_STAT(
+			qm_port->ev_port->stats.traffic.tx_nospc_ldb_hw_credits,
+			1);
+			DLB2_LOG_DBG("ldb credits exhausted\n");
+			return 1; /* credits exhausted */
+		}
+	}
+
+	return 0;
+}
+
+static inline int
+dlb2_check_enqueue_hw_dir_credits(struct dlb2_port *qm_port)
+{
+	if (unlikely(qm_port->cached_dir_credits == 0)) {
+		qm_port->cached_dir_credits =
+			dlb2_port_credits_get(qm_port,
+					      DLB2_DIR_QUEUE);
+		if (unlikely(qm_port->cached_dir_credits == 0)) {
+			DLB2_INC_STAT(
+			qm_port->ev_port->stats.traffic.tx_nospc_dir_hw_credits,
+			1);
+			DLB2_LOG_DBG("dir credits exhausted\n");
+			return 1; /* credits exhausted */
+		}
+	}
+
+	return 0;
+}
+
+static __rte_always_inline void
+dlb2_pp_write(struct dlb2_enqueue_qe *qe4,
+	      struct process_local_port_data *port_data)
+{
+	dlb2_movdir64b(port_data->pp_addr, qe4);
+}
+
+static inline int
+dlb2_consume_qe_immediate(struct dlb2_port *qm_port, int num)
+{
+	struct process_local_port_data *port_data;
+	struct dlb2_cq_pop_qe *qe;
+
+	RTE_ASSERT(qm_port->config_state == DLB2_CONFIGURED);
+
+	qe = qm_port->consume_qe;
+
+	qe->tokens = num - 1;
+
+	/* No store fence needed since no pointer is being sent, and CQ token
+	 * pops can be safely reordered with other HCWs.
+	 */
+	port_data = &dlb2_port[qm_port->id][PORT_TYPE(qm_port)];
+
+	dlb2_movntdq_single(port_data->pp_addr, qe);
+
+	DLB2_LOG_DBG("dlb2: consume immediate - %d QEs\n", num);
+
+	qm_port->owed_tokens = 0;
+
+	return 0;
+}
+
+static inline void
+dlb2_hw_do_enqueue(struct dlb2_port *qm_port,
+		   bool do_sfence,
+		   struct process_local_port_data *port_data)
+{
+	/* Since MOVDIR64B is weakly-ordered, use an SFENCE to ensure that
+	 * application writes complete before enqueueing the QE.
+	 */
+	if (do_sfence)
+		rte_wmb();
+
+	dlb2_pp_write(qm_port->qe4, port_data);
+}
+
+static inline void
+dlb2_construct_token_pop_qe(struct dlb2_port *qm_port, int idx)
+{
+	struct dlb2_cq_pop_qe *qe = (void *)qm_port->qe4;
+	int num = qm_port->owed_tokens;
+
+	qe[idx].cmd_byte = DLB2_POP_CMD_BYTE;
+	qe[idx].tokens = num - 1;
+
+	qm_port->owed_tokens = 0;
+}
+
+static inline void
+dlb2_event_build_hcws(struct dlb2_port *qm_port,
+		      const struct rte_event ev[],
+		      int num,
+		      uint8_t *sched_type,
+		      uint8_t *queue_id)
+{
+	struct dlb2_enqueue_qe *qe;
+	uint16_t sched_word[4];
+	__m128i sse_qe[2];
+	int i;
+
+	qe = qm_port->qe4;
+
+	sse_qe[0] = _mm_setzero_si128();
+	sse_qe[1] = _mm_setzero_si128();
+
+	switch (num) {
+	case 4:
+		/* Construct the metadata portion of two HCWs in one 128b SSE
+		 * register. HCW metadata is constructed in the SSE registers
+		 * like so:
+		 * sse_qe[0][63:0]:   qe[0]'s metadata
+		 * sse_qe[0][127:64]: qe[1]'s metadata
+		 * sse_qe[1][63:0]:   qe[2]'s metadata
+		 * sse_qe[1][127:64]: qe[3]'s metadata
+		 */
+
+		/* Convert the event operation into a command byte and store it
+		 * in the metadata:
+		 * sse_qe[0][63:56]   = cmd_byte_map[is_directed][ev[0].op]
+		 * sse_qe[0][127:120] = cmd_byte_map[is_directed][ev[1].op]
+		 * sse_qe[1][63:56]   = cmd_byte_map[is_directed][ev[2].op]
+		 * sse_qe[1][127:120] = cmd_byte_map[is_directed][ev[3].op]
+		 */
+#define DLB2_QE_CMD_BYTE 7
+		sse_qe[0] = _mm_insert_epi8(sse_qe[0],
+				cmd_byte_map[qm_port->is_directed][ev[0].op],
+				DLB2_QE_CMD_BYTE);
+		sse_qe[0] = _mm_insert_epi8(sse_qe[0],
+				cmd_byte_map[qm_port->is_directed][ev[1].op],
+				DLB2_QE_CMD_BYTE + 8);
+		sse_qe[1] = _mm_insert_epi8(sse_qe[1],
+				cmd_byte_map[qm_port->is_directed][ev[2].op],
+				DLB2_QE_CMD_BYTE);
+		sse_qe[1] = _mm_insert_epi8(sse_qe[1],
+				cmd_byte_map[qm_port->is_directed][ev[3].op],
+				DLB2_QE_CMD_BYTE + 8);
+
+		/* Store priority, scheduling type, and queue ID in the sched
+		 * word array because these values are re-used when the
+		 * destination is a directed queue.
+		 */
+		sched_word[0] = EV_TO_DLB2_PRIO(ev[0].priority) << 10 |
+				sched_type[0] << 8 |
+				queue_id[0];
+		sched_word[1] = EV_TO_DLB2_PRIO(ev[1].priority) << 10 |
+				sched_type[1] << 8 |
+				queue_id[1];
+		sched_word[2] = EV_TO_DLB2_PRIO(ev[2].priority) << 10 |
+				sched_type[2] << 8 |
+				queue_id[2];
+		sched_word[3] = EV_TO_DLB2_PRIO(ev[3].priority) << 10 |
+				sched_type[3] << 8 |
+				queue_id[3];
+
+		/* Store the event priority, scheduling type, and queue ID in
+		 * the metadata:
+		 * sse_qe[0][31:16] = sched_word[0]
+		 * sse_qe[0][95:80] = sched_word[1]
+		 * sse_qe[1][31:16] = sched_word[2]
+		 * sse_qe[1][95:80] = sched_word[3]
+		 */
+#define DLB2_QE_QID_SCHED_WORD 1
+		sse_qe[0] = _mm_insert_epi16(sse_qe[0],
+					     sched_word[0],
+					     DLB2_QE_QID_SCHED_WORD);
+		sse_qe[0] = _mm_insert_epi16(sse_qe[0],
+					     sched_word[1],
+					     DLB2_QE_QID_SCHED_WORD + 4);
+		sse_qe[1] = _mm_insert_epi16(sse_qe[1],
+					     sched_word[2],
+					     DLB2_QE_QID_SCHED_WORD);
+		sse_qe[1] = _mm_insert_epi16(sse_qe[1],
+					     sched_word[3],
+					     DLB2_QE_QID_SCHED_WORD + 4);
+
+		/* If the destination is a load-balanced queue, store the lock
+		 * ID. If it is a directed queue, DLB places this field in
+		 * bytes 10-11 of the received QE, so we format it accordingly:
+		 * sse_qe[0][47:32]  = dir queue ? sched_word[0] : flow_id[0]
+		 * sse_qe[0][111:96] = dir queue ? sched_word[1] : flow_id[1]
+		 * sse_qe[1][47:32]  = dir queue ? sched_word[2] : flow_id[2]
+		 * sse_qe[1][111:96] = dir queue ? sched_word[3] : flow_id[3]
+		 */
+#define DLB2_QE_LOCK_ID_WORD 2
+		sse_qe[0] = _mm_insert_epi16(sse_qe[0],
+				(sched_type[0] == DLB2_SCHED_DIRECTED) ?
+					sched_word[0] : ev[0].flow_id,
+				DLB2_QE_LOCK_ID_WORD);
+		sse_qe[0] = _mm_insert_epi16(sse_qe[0],
+				(sched_type[1] == DLB2_SCHED_DIRECTED) ?
+					sched_word[1] : ev[1].flow_id,
+				DLB2_QE_LOCK_ID_WORD + 4);
+		sse_qe[1] = _mm_insert_epi16(sse_qe[1],
+				(sched_type[2] == DLB2_SCHED_DIRECTED) ?
+					sched_word[2] : ev[2].flow_id,
+				DLB2_QE_LOCK_ID_WORD);
+		sse_qe[1] = _mm_insert_epi16(sse_qe[1],
+				(sched_type[3] == DLB2_SCHED_DIRECTED) ?
+					sched_word[3] : ev[3].flow_id,
+				DLB2_QE_LOCK_ID_WORD + 4);
+
+		/* Store the event type and sub event type in the metadata:
+		 * sse_qe[0][15:0]  = flow_id[0]
+		 * sse_qe[0][79:64] = flow_id[1]
+		 * sse_qe[1][15:0]  = flow_id[2]
+		 * sse_qe[1][79:64] = flow_id[3]
+		 */
+#define DLB2_QE_EV_TYPE_WORD 0
+		sse_qe[0] = _mm_insert_epi16(sse_qe[0],
+					     ev[0].sub_event_type << 8 |
+						ev[0].event_type,
+					     DLB2_QE_EV_TYPE_WORD);
+		sse_qe[0] = _mm_insert_epi16(sse_qe[0],
+					     ev[1].sub_event_type << 8 |
+						ev[1].event_type,
+					     DLB2_QE_EV_TYPE_WORD + 4);
+		sse_qe[1] = _mm_insert_epi16(sse_qe[1],
+					     ev[2].sub_event_type << 8 |
+						ev[2].event_type,
+					     DLB2_QE_EV_TYPE_WORD);
+		sse_qe[1] = _mm_insert_epi16(sse_qe[1],
+					     ev[3].sub_event_type << 8 |
+						ev[3].event_type,
+					     DLB2_QE_EV_TYPE_WORD + 4);
+
+		/* Store the metadata to memory (use the double-precision
+		 * _mm_storeh_pd because there is no integer function for
+		 * storing the upper 64b):
+		 * qe[0] metadata = sse_qe[0][63:0]
+		 * qe[1] metadata = sse_qe[0][127:64]
+		 * qe[2] metadata = sse_qe[1][63:0]
+		 * qe[3] metadata = sse_qe[1][127:64]
+		 */
+		_mm_storel_epi64((__m128i *)&qe[0].u.opaque_data, sse_qe[0]);
+		_mm_storeh_pd((double *)&qe[1].u.opaque_data,
+			      (__m128d)sse_qe[0]);
+		_mm_storel_epi64((__m128i *)&qe[2].u.opaque_data, sse_qe[1]);
+		_mm_storeh_pd((double *)&qe[3].u.opaque_data,
+			      (__m128d)sse_qe[1]);
+
+		qe[0].data = ev[0].u64;
+		qe[1].data = ev[1].u64;
+		qe[2].data = ev[2].u64;
+		qe[3].data = ev[3].u64;
+
+		break;
+	case 3:
+	case 2:
+	case 1:
+		/* At least one QE will be valid, so only zero out three */
+		qe[1].cmd_byte = 0;
+		qe[2].cmd_byte = 0;
+		qe[3].cmd_byte = 0;
+
+		for (i = 0; i < num; i++) {
+			qe[i].cmd_byte =
+				cmd_byte_map[qm_port->is_directed][ev[i].op];
+			qe[i].sched_type = sched_type[i];
+			qe[i].data = ev[i].u64;
+			qe[i].qid = queue_id[i];
+			qe[i].priority = EV_TO_DLB2_PRIO(ev[i].priority);
+			qe[i].lock_id = ev[i].flow_id;
+			if (sched_type[i] == DLB2_SCHED_DIRECTED) {
+				struct dlb2_msg_info *info =
+					(struct dlb2_msg_info *)&qe[i].lock_id;
+
+				info->qid = queue_id[i];
+				info->sched_type = DLB2_SCHED_DIRECTED;
+				info->priority = qe[i].priority;
+			}
+			qe[i].u.event_type.major = ev[i].event_type;
+			qe[i].u.event_type.sub = ev[i].sub_event_type;
+		}
+		break;
+	}
+}
+
+static inline int
+dlb2_event_enqueue_prep(struct dlb2_eventdev_port *ev_port,
+			struct dlb2_port *qm_port,
+			const struct rte_event ev[],
+			uint8_t *sched_type,
+			uint8_t *queue_id)
+{
+	struct dlb2_eventdev *dlb2 = ev_port->dlb2;
+	struct dlb2_eventdev_queue *ev_queue;
+	uint16_t *cached_credits = NULL;
+	struct dlb2_queue *qm_queue;
+
+	ev_queue = &dlb2->ev_queues[ev->queue_id];
+	qm_queue = &ev_queue->qm_queue;
+	*queue_id = qm_queue->id;
+
+	/* Ignore sched_type and hardware credits on release events */
+	if (ev->op == RTE_EVENT_OP_RELEASE)
+		goto op_check;
+
+	if (!qm_queue->is_directed) {
+		/* Load balanced destination queue */
+
+		if (dlb2_check_enqueue_hw_ldb_credits(qm_port)) {
+			rte_errno = -ENOSPC;
+			return 1;
+		}
+		cached_credits = &qm_port->cached_ldb_credits;
+
+		switch (ev->sched_type) {
+		case RTE_SCHED_TYPE_ORDERED:
+			DLB2_LOG_DBG("dlb2: put_qe: RTE_SCHED_TYPE_ORDERED\n");
+			if (qm_queue->sched_type != RTE_SCHED_TYPE_ORDERED) {
+				DLB2_LOG_ERR("dlb2: tried to send ordered event to unordered queue %d\n",
+					     *queue_id);
+				rte_errno = -EINVAL;
+				return 1;
+			}
+			*sched_type = DLB2_SCHED_ORDERED;
+			break;
+		case RTE_SCHED_TYPE_ATOMIC:
+			DLB2_LOG_DBG("dlb2: put_qe: RTE_SCHED_TYPE_ATOMIC\n");
+			*sched_type = DLB2_SCHED_ATOMIC;
+			break;
+		case RTE_SCHED_TYPE_PARALLEL:
+			DLB2_LOG_DBG("dlb2: put_qe: RTE_SCHED_TYPE_PARALLEL\n");
+			if (qm_queue->sched_type == RTE_SCHED_TYPE_ORDERED)
+				*sched_type = DLB2_SCHED_ORDERED;
+			else
+				*sched_type = DLB2_SCHED_UNORDERED;
+			break;
+		default:
+			DLB2_LOG_ERR("Unsupported LDB sched type in put_qe\n");
+			DLB2_INC_STAT(ev_port->stats.tx_invalid, 1);
+			rte_errno = -EINVAL;
+			return 1;
+		}
+	} else {
+		/* Directed destination queue */
+
+		if (dlb2_check_enqueue_hw_dir_credits(qm_port)) {
+			rte_errno = -ENOSPC;
+			return 1;
+		}
+		cached_credits = &qm_port->cached_dir_credits;
+
+		DLB2_LOG_DBG("dlb2: put_qe: RTE_SCHED_TYPE_DIRECTED\n");
+
+		*sched_type = DLB2_SCHED_DIRECTED;
+	}
+
+op_check:
+	switch (ev->op) {
+	case RTE_EVENT_OP_NEW:
+		/* Check that a sw credit is available */
+		if (dlb2_check_enqueue_sw_credits(dlb2, ev_port)) {
+			rte_errno = -ENOSPC;
+			return 1;
+		}
+		ev_port->inflight_credits--;
+		(*cached_credits)--;
+		break;
+	case RTE_EVENT_OP_FORWARD:
+		/* Check for outstanding_releases underflow. If this occurs,
+		 * the application is not using the EVENT_OPs correctly; for
+		 * example, forwarding or releasing events that were not
+		 * dequeued.
+		 */
+		RTE_ASSERT(ev_port->outstanding_releases > 0);
+		ev_port->outstanding_releases--;
+		qm_port->issued_releases++;
+		(*cached_credits)--;
+		break;
+	case RTE_EVENT_OP_RELEASE:
+		ev_port->inflight_credits++;
+		/* Check for outstanding_releases underflow. If this occurs,
+		 * the application is not using the EVENT_OPs correctly; for
+		 * example, forwarding or releasing events that were not
+		 * dequeued.
+		 */
+		RTE_ASSERT(ev_port->outstanding_releases > 0);
+		ev_port->outstanding_releases--;
+		qm_port->issued_releases++;
+
+		/* Replenish s/w credits if enough are cached */
+		dlb2_replenish_sw_credits(dlb2, ev_port);
+		break;
+	}
+
+	DLB2_INC_STAT(ev_port->stats.tx_op_cnt[ev->op], 1);
+	DLB2_INC_STAT(ev_port->stats.traffic.tx_ok, 1);
+
+#ifndef RTE_LIBRTE_PMD_DLB2_QUELL_STATS
+	if (ev->op != RTE_EVENT_OP_RELEASE) {
+		DLB2_INC_STAT(ev_port->stats.queue[ev->queue_id].enq_ok, 1);
+		DLB2_INC_STAT(ev_port->stats.tx_sched_cnt[*sched_type], 1);
+	}
+#endif
+
+	return 0;
+}
+
+static inline uint16_t
+dlb2_event_enqueue_burst(void *event_port,
+			 const struct rte_event events[],
+			 uint16_t num)
+{
+	struct dlb2_eventdev_port *ev_port = event_port;
+	struct dlb2_port *qm_port = &ev_port->qm_port;
+	struct process_local_port_data *port_data;
+	int i, cnt;
+
+	RTE_ASSERT(ev_port->enq_configured);
+	RTE_ASSERT(events != NULL);
+
+	cnt = 0;
+
+	port_data = &dlb2_port[qm_port->id][PORT_TYPE(qm_port)];
+
+	for (i = 0; i < num; i += DLB2_NUM_QES_PER_CACHE_LINE) {
+		uint8_t sched_types[DLB2_NUM_QES_PER_CACHE_LINE];
+		uint8_t queue_ids[DLB2_NUM_QES_PER_CACHE_LINE];
+		int j = 0;
+
+		for (; j < DLB2_NUM_QES_PER_CACHE_LINE && (i + j) < num; j++) {
+			const struct rte_event *ev = &events[i + j];
+
+			if (dlb2_event_enqueue_prep(ev_port, qm_port, ev,
+						    &sched_types[j],
+						    &queue_ids[j]))
+				break;
+		}
+
+		if (j == 0)
+			break;
+
+		dlb2_event_build_hcws(qm_port, &events[i], j,
+				      sched_types, queue_ids);
+
+		dlb2_hw_do_enqueue(qm_port, i == 0, port_data);
+
+		cnt += j;
+
+		if (j < DLB2_NUM_QES_PER_CACHE_LINE)
+			break;
+	}
+
+	return cnt;
+}
+
+static inline uint16_t
+dlb2_event_enqueue(void *event_port,
+		   const struct rte_event events[])
+{
+	return dlb2_event_enqueue_burst(event_port, events, 1);
+}
+
+static uint16_t
+dlb2_event_enqueue_new_burst(void *event_port,
+			     const struct rte_event events[],
+			     uint16_t num)
+{
+	return dlb2_event_enqueue_burst(event_port, events, num);
+}
+
+static uint16_t
+dlb2_event_enqueue_forward_burst(void *event_port,
+				 const struct rte_event events[],
+				 uint16_t num)
+{
+	return dlb2_event_enqueue_burst(event_port, events, num);
+}
+
 static void
 dlb2_entry_points_init(struct rte_eventdev *dev)
 {
@@ -2112,7 +2684,13 @@ dlb2_entry_points_init(struct rte_eventdev *dev)
 		.xstats_reset	    = dlb2_eventdev_xstats_reset,
 	};
 
+	/* Expose PMD's eventdev interface */
+
 	dev->dev_ops = &dlb2_eventdev_entry_ops;
+	dev->enqueue = dlb2_event_enqueue;
+	dev->enqueue_burst = dlb2_event_enqueue_burst;
+	dev->enqueue_new_burst = dlb2_event_enqueue_new_burst;
+	dev->enqueue_forward_burst = dlb2_event_enqueue_forward_burst;
 }
 
 int
-- 
2.6.4


  parent reply	other threads:[~2020-10-30 18:40 UTC|newest]

Thread overview: 366+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11 20:26 [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 01/22] event/dlb2: add meson build infrastructure Timothy McDaniel
2020-10-06 15:58   ` Eads, Gage
2020-10-17 18:20   ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Timothy McDaniel
2020-10-17 18:20     ` [dpdk-dev] [PATCH v2 01/22] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-18  8:48       ` Jerin Jacob
2020-10-19  8:33         ` Bruce Richardson
2020-10-20 15:17           ` McDaniel, Timothy
2020-10-20 15:20             ` Thomas Monjalon
2020-10-20 15:33               ` McDaniel, Timothy
2020-10-20 15:38                 ` Bruce Richardson
2020-10-20 15:34             ` Bruce Richardson
2020-10-20 15:43               ` McDaniel, Timothy
2020-10-21 16:33           ` McDaniel, Timothy
2020-10-20 14:07         ` McDaniel, Timothy
2020-10-19  9:59       ` Kinsella, Ray
2020-10-30  9:43       ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30  9:43         ` [dpdk-dev] [PATCH v5 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 10:01         ` [dpdk-dev] [PATCH v5 00/23] Add DLB2 PMD Thomas Monjalon
2020-10-30 10:16           ` McDaniel, Timothy
2020-10-30 10:32             ` Jerin Jacob
2020-10-30 10:43               ` Thomas Monjalon
2020-10-30 11:58             ` McDaniel, Timothy
2020-10-30 13:15               ` Thomas Monjalon
2020-10-30 15:35                 ` McDaniel, Timothy
2020-10-30 15:47                   ` Thomas Monjalon
2020-10-30 16:02                     ` McDaniel, Timothy
2020-10-30 16:42                       ` Thomas Monjalon
2020-10-30 14:21         ` Jerin Jacob
2020-10-30 15:25           ` McDaniel, Timothy
2020-10-30 15:31             ` Jerin Jacob
2020-10-30 16:08               ` Van Haaren, Harry
2020-10-30 16:13                 ` McDaniel, Timothy
2020-10-30 15:33             ` David Marchand
2020-10-30 18:28       ` [dpdk-dev] [PATCH v6 " Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 19:51           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 19:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 18:50           ` Eads, Gage
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 18:28         ` [dpdk-dev] [PATCH v6 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 18:29         ` Timothy McDaniel [this message]
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 18/23] event/dlb2: add dequeue and its burst variants Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 18:29         ` [dpdk-dev] [PATCH v6 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-30 23:51       ` [dpdk-dev] [PATCH v7 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-30 23:51         ` [dpdk-dev] [PATCH v7 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31  2:01       ` [dpdk-dev] [PATCH v8 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31  9:52           ` Jerin Jacob
2020-10-31 17:13             ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 10:51           ` David Marchand
2020-10-31 16:37             ` McDaniel, Timothy
2020-10-31 19:19               ` McDaniel, Timothy
2020-10-31 21:38                 ` David Marchand
2020-10-31 21:43                   ` McDaniel, Timothy
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31  2:01         ` [dpdk-dev] [PATCH v8 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-31 17:25       ` [dpdk-dev] [PATCH v9 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-31 17:25         ` [dpdk-dev] [PATCH v9 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-31 17:26         ` [dpdk-dev] [PATCH v9 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 20:00       ` [dpdk-dev] [PATCH v10 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 20:00         ` [dpdk-dev] [PATCH v10 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 20:01         ` [dpdk-dev] [PATCH v10 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-01 23:37       ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 09/23] event/dlb2: add xstats Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 13/23] event/dlb2: add port setup Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 14/23] event/dlb2: add port link Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-11-01 23:37         ` [dpdk-dev] [PATCH v11 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-11-01 23:38         ` [dpdk-dev] [PATCH v11 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-11-02  8:49         ` [dpdk-dev] [PATCH v11 00/23] Add DLB2 PMD Jerin Jacob
2020-10-17 18:20     ` [dpdk-dev] [PATCH v2 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-18  8:57       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 04/22] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-18  8:59       ` Jerin Jacob
2020-10-20 14:08         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-18  8:39       ` Jerin Jacob
2020-10-20 14:04         ` McDaniel, Timothy
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 07/22] event/dlb2: add xstats Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 10/22] event/dlb2: add queue setup Timothy McDaniel
2020-10-20 14:01       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-20 14:02       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-18  9:13       ` Jerin Jacob
2020-10-20 14:12         ` McDaniel, Timothy
2020-10-19 10:01       ` Kinsella, Ray
2020-10-20 14:05       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-20 14:04       ` Eads, Gage
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-17 18:21     ` [dpdk-dev] [PATCH v2 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-18  9:22       ` Jerin Jacob
2020-10-20 14:13         ` McDaniel, Timothy
2020-10-24 13:06     ` [dpdk-dev] [PATCH v2 00/22] Add DLB2 PMD Thomas Monjalon
2020-10-23 18:30   ` [dpdk-dev] [PATCH v3 00/23] " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-24 12:58       ` Jerin Jacob
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-23 18:30     ` [dpdk-dev] [PATCH v3 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-29 15:24   ` [dpdk-dev] [PATCH v4 00/23] Add DLB2 PMD Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 01/23] event/dlb2: add documentation and meson build infrastructure Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 02/23] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 03/23] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-29 15:29       ` Stephen Hemminger
2020-10-29 16:07         ` McDaniel, Timothy
2020-10-29 15:30       ` Stephen Hemminger
2020-10-29 16:10         ` McDaniel, Timothy
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 04/23] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-29 15:24     ` [dpdk-dev] [PATCH v4 05/23] event/dlb2: add inline functions Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 06/23] event/dlb2: add eventdev probe Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 07/23] event/dlb2: add flexible interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 08/23] event/dlb2: add probe-time hardware init Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 09/23] event/dlb2: add xstats Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 10/23] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 11/23] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 12/23] event/dlb2: add queue setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 13/23] event/dlb2: add port setup Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 14/23] event/dlb2: add port link Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 15/23] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 16/23] event/dlb2: add eventdev start Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 17/23] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 18/23] event/dlb2: add dequeue " Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 19/23] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 20/23] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 21/23] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 22/23] event/dlb2: add queue and port release Timothy McDaniel
2020-10-29 15:25     ` [dpdk-dev] [PATCH v4 23/23] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-09-11 20:26 ` [dpdk-dev] [PATCH 02/22] event/dlb2: add dynamic logging Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 03/22] event/dlb2: add private data structures and constants Timothy McDaniel
2020-10-06 16:52   ` Eads, Gage
2020-10-07 16:14   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 04/22] event/dlb2: add definitions shared with LKM or shared code Timothy McDaniel
2020-10-06 19:26   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 05/22] event/dlb2: add inline functions Timothy McDaniel
2020-10-06 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 06/22] event/dlb2: add probe Timothy McDaniel
2020-10-07 16:56   ` Eads, Gage
2020-10-18  9:05   ` Jerin Jacob
2020-10-20 14:11     ` McDaniel, Timothy
2020-09-11 20:26 ` [dpdk-dev] [PATCH 07/22] event/dlb2: add xstats Timothy McDaniel
2020-09-17 20:58   ` Chen, Mike Ximing
2020-09-17 21:26     ` McDaniel, Timothy
2020-09-18  0:37       ` Chen, Mike Ximing
2020-09-18  8:39         ` Bruce Richardson
2020-10-07 18:47   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 08/22] event/dlb2: add infos get and configure Timothy McDaniel
2020-10-07 19:14   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 09/22] event/dlb2: add queue and port default conf Timothy McDaniel
2020-10-07 19:15   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 10/22] event/dlb2: add queue setup Timothy McDaniel
2020-10-07 19:26   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 11/22] event/dlb2: add port setup Timothy McDaniel
2020-10-07 20:34   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 12/22] event/dlb2: add port link Timothy McDaniel
2020-10-07 20:40   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 13/22] event/dlb2: add port unlink and port unlinks in progress Timothy McDaniel
2020-10-07 20:44   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 14/22] event/dlb2: add eventdev start Timothy McDaniel
2020-10-07 20:51   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 15/22] event/dlb2: add enqueue and its burst variants Timothy McDaniel
2020-10-07 21:02   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 16/22] event/dlb2: add dequeue " Timothy McDaniel
2020-10-07 21:18   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 17/22] event/dlb2: add eventdev stop and close Timothy McDaniel
2020-10-07 21:21   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 18/22] event/dlb2: add PMD's token pop public interface Timothy McDaniel
2020-10-07 21:24   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 19/22] event/dlb2: add PMD self-tests Timothy McDaniel
2020-10-07 21:33   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 20/22] event/dlb2: add queue and port release Timothy McDaniel
2020-10-07 21:55   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 21/22] event/dlb2: add timeout ticks entry point Timothy McDaniel
2020-10-07 21:58   ` Eads, Gage
2020-09-11 20:26 ` [dpdk-dev] [PATCH 22/22] doc: add new DLB2 eventdev driver to relnotes Timothy McDaniel
2020-10-07 22:04   ` Eads, Gage
2020-09-21 17:11 ` [dpdk-dev] [PATCH 00/22] Add DLB2 PMD Jerin Jacob
2020-09-21 17:15   ` McDaniel, Timothy
2020-09-29 18:41     ` Jerin Jacob
2020-09-29 18:46       ` McDaniel, Timothy
2020-09-30 16:10       ` McDaniel, Timothy
2020-09-29 18:46 ` Jerin Jacob
2020-09-30 16:14   ` McDaniel, Timothy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1604082547-16710-18-git-send-email-timothy.mcdaniel@intel.com \
    --to=timothy.mcdaniel@intel.com \
    --cc=dev@dpdk.org \
    --cc=erik.g.carrillo@intel.com \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=jerinj@marvell.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).