patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Christian Ehrhardt <christian.ehrhardt@canonical.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>,
	 Abhishek Marathe <Abhishek.Marathe@microsoft.com>,
	Akhil Goyal <akhil.goyal@nxp.com>,
	 Ali Alnubani <alialnu@nvidia.com>,
	David Christensen <drc@linux.vnet.ibm.com>,
	 Hariprasad Govindharajan <hariprasad.govindharajan@intel.com>,
	 Hemant Agrawal <hemant.agrawal@nxp.com>,
	Ian Stokes <ian.stokes@intel.com>,
	 Jerin Jacob <jerinj@marvell.com>,
	John McNamara <john.mcnamara@intel.com>,
	 Ju-Hyoung Lee <juhlee@microsoft.com>,
	Kevin Traynor <ktraynor@redhat.com>,
	 Luca Boccassi <bluca@debian.org>, Pei Zhang <pezhang@redhat.com>,
	 Raslan Darawsheh <rasland@nvidia.com>,
	Thomas Monjalon <thomas@monjalon.net>,
	benjamin.walker@intel.com,  dpdk stable <stable@dpdk.org>,
	dpdk-dev <dev@dpdk.org>,
	pingx.yu@intel.com, qian.q.xu@intel.com, yuan.peng@intel.com,
	zhaoyan.chen@intel.com
Subject: Re: 19.11.11 patches review and test
Date: Tue, 14 Dec 2021 14:58:01 +0100	[thread overview]
Message-ID: <CAATJJ0L1iEsEE6Bk0S93-PJpGUNdDnsJkHRY=-YNRzhAHJyZkQ@mail.gmail.com> (raw)
In-Reply-To: <9f445304-f5d6-49a7-1f0f-65db8725d1ca@intel.com>

On Tue, Dec 14, 2021 at 2:10 PM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
>
> On 12/14/2021 11:39 AM, Christian Ehrhardt wrote:
> > On Tue, Dec 14, 2021 at 11:13 AM Ferruh Yigit <ferruh.yigit@intel.com> wrote:
> >>
> >> On 12/14/2021 7:44 AM, Christian Ehrhardt wrote:
> >>> On Tue, Dec 14, 2021 at 6:49 AM Kalesh Anakkur Purayil
> >>> <kalesh-anakkur.purayil@broadcom.com> wrote:
> >>>
> >>> [snip]
> >>>
> >>>>>> [Kalesh] Yes, i am seeing the same error. I used make command to build dpdk, not meson.
> >>>>>> The back ported commit you mentioned takes care of meson build only I think.
> >>>>>>
> >>>>>
> >>>>> I see, make build is failing, and yes the fix is only for the meson.
> >>>>> I will check the make build and will send a fix for it.
> >>>>
> >>>> [Kalesh]: looks like the below changes fixes the issue. I tried only on SLES15 SP3 and not on other SLES flavors.
> >>>>
> >>>> diff --git a/kernel/linux/kni/Makefile b/kernel/linux/kni/Makefile
> >>>> index 595bac2..bf0efab 100644
> >>>> --- a/kernel/linux/kni/Makefile
> >>>> +++ b/kernel/linux/kni/Makefile
> >>>> @@ -16,6 +16,16 @@ MODULE_CFLAGS += -I$(RTE_OUTPUT)/include
> >>>>    MODULE_CFLAGS += -include $(RTE_OUTPUT)/include/rte_config.h
> >>>>    MODULE_CFLAGS += -Wall -Werror
> >>>>
> >>>> +#
> >>>> +# Use explicit 'source' folder for header path. In SUSE 'source' is not linked to 'build' folder.
> >>>> +#
> >>>> +ifdef CONFIG_SUSE_KERNEL
> >>>> +   KSRC = /lib/modules/$(shell uname -r)/source
> >>>> +   ifneq ($(shell grep -A 1 "ndo_tx_timeout" $(KSRC)/include/linux/netdevice.h | grep -o txqueue),)
> >>>> +      MODULE_CFLAGS += -DHAVE_TX_TIMEOUT_TXQUEUE
> >>>> +   endif
> >>>> +endif
> >>>
> >>> Back in the day we tried various "is Suse and kernel version x.y"
> >>> approaches, but they failed as there was no clear version throughout
> >>> all of the Suse streams (leap, tumbleweed, sles) that worked well for
> >>> all.
> >>> This change here follows the upstream approach of "just check if it is there".
> >>>
> >>> I've applied this to 19.11 and did test builds across various distributions:
> >>> 1. no non-suse build changed
> >>> 2. suse builds stayed as-is or improved
> >>> Formerly failing:
> >>>      openSUSE_Factory_ARM aarch64
> >>>      SLE_15  x86_64 -> now working
> >>>      openSUSE_Leap_15.3 x86_64 -> now working
> >>>      openSUSE_Tumbleweed  x86_64 -> still failing
> >>> Formerly working:
> >>>      SLE_12_SP4 x86_64 ppc64le -> still fine
> >>>      openSUSE_Factory_ARM armv7l  -> still fine
> >>>      openSUSE_Leap_15.2 x86_64  -> still fine
> >>>
> >>
> >> Thanks Kalesh for the fix, and thanks Christian for testing.
> >>
> >> I was expecting this approach will fix all builds, after patch only
> >> 'openSUSE_Tumbleweed' is failing, right? I will check it.
> >
> > As just discussed on IRC, yes and the log for that is at
> > https://build.opensuse.org/package/live_build_log/home:cpaelzer:branches:home:bluca:dpdk/dpdk-19.11/openSUSE_Tumbleweed/x86_64
> >
> > It also is affected by an issue around  -Werror=implicit-fallthrough,
> > so even with KNI fixed it likely is going to fail.
> >
> >> And I think you need the fix as a patch anyway, @Kalesh are you
> >> planning to send the patch?
> >
> > I don't need it, as I have already grabbed and preliminary added it:
> > https://github.com/cpaelzer/dpdk-stable-queue/commit/d43fa3e198c08a3a76d70f4565b31ad3ab5f29c4
> >
> > But surely, once/If you come up with a full patch that also includes
> > tumbleweed I can replace it with yours.
> >
>
> 'tumbleweed' error is odd, it complains about macro being redefined,
> not sure why only in this platform we are getting an error.
>
> Macro is only defined in one place, but indeed header file included
> multiple times, one direct and one indirect, so macro defined multiple
> times but without value, so it should be OK and it is OK for other
> platforms, it is defined as:
> #define HAVE_TX_TIMEOUT_TXQUEUE
>
> Another option is that macro is defined in some other header file,
> although I think that is very unlikely, can you please test with
> below change to rule out that option:

I'm testing that and will let you know in a bit ...

> diff --git a/kernel/linux/kni/compat.h b/kernel/linux/kni/compat.h
> index 664785674ff1..71846419f437 100644
> --- a/kernel/linux/kni/compat.h
> +++ b/kernel/linux/kni/compat.h
> @@ -135,7 +135,7 @@
>          (defined(RHEL_RELEASE_CODE) && \
>           RHEL_RELEASE_VERSION(8, 3) <= RHEL_RELEASE_CODE) || \
>           (defined(CONFIG_SUSE_KERNEL) && defined(HAVE_ARG_TX_QUEUE))
> -#define HAVE_TX_TIMEOUT_TXQUEUE
> +#define RTE_HAVE_TX_TIMEOUT_TXQUEUE
>   #endif
>
>   #if KERNEL_VERSION(5, 9, 0) > LINUX_VERSION_CODE
> diff --git a/kernel/linux/kni/kni_net.c b/kernel/linux/kni/kni_net.c
> index c8bad5f197ca..7397de4659b2 100644
> --- a/kernel/linux/kni/kni_net.c
> +++ b/kernel/linux/kni/kni_net.c
> @@ -623,7 +623,7 @@ kni_net_rx(struct kni_dev *kni)
>   /*
>    * Deal with a transmit timeout.
>    */
> -#ifdef HAVE_TX_TIMEOUT_TXQUEUE
> +#ifdef RTE_HAVE_TX_TIMEOUT_TXQUEUE
>   static void
>   kni_net_tx_timeout(struct net_device *dev, unsigned int txqueue)
>   #else
>
>
> >>> Past fixes always "inverted" the result, by fixing some but breaking others.
> >>> This new patch works in "not breaking any formerly working build" but
> >>> at the same time fixing a few builds.
> >>> Therefore -> applied & thanks!
> >>>
> >>> I'll likely tag -rc2 before the end of the week.
> >>> The good thing is that (so far) we have:
> >>> 1. a non functional change
> >>> 2. a change fixing clang-13 builds (TBH only one of many needed clang13 issues)
> >>> 3. a change fixing sles15SP3 builds
> >>>
> >>> Due to those, no current ongoing tests will have to be restarted.
> >>> Whoever was able to build, can continue the current tests.
> >>> Whoever was blocked by SLES15SP3 or clang-13 had no tests other than a
> >>> failing build and can work with -rc2 then.
> >>> I'll explain the same in the mail about -rc2.
> >>>
> >>>>    -include /etc/lsb-release
> >>>>
> >>>>    ifeq ($(DISTRIB_ID),Ubuntu)
> >>>>
> >>>> Regards,
> >>>> Kalesh
> >>>
> >>> [snip]
> >>>
> >>
> >
> >
>


-- 
Christian Ehrhardt
Staff Engineer, Ubuntu Server
Canonical Ltd

  reply	other threads:[~2021-12-14 13:58 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-09 14:43 christian.ehrhardt
2021-12-13  4:14 ` Kalesh Anakkur Purayil
2021-12-13 11:06   ` Ferruh Yigit
2021-12-13 12:39     ` Christian Ehrhardt
2021-12-13 12:58       ` Ferruh Yigit
2021-12-13 13:32         ` Christian Ehrhardt
2021-12-13 13:49           ` Kalesh Anakkur Purayil
2021-12-13 14:07             ` Ferruh Yigit
2021-12-14  5:49               ` Kalesh Anakkur Purayil
2021-12-14  7:44                 ` Christian Ehrhardt
2021-12-14 10:13                   ` Ferruh Yigit
2021-12-14 11:39                     ` Christian Ehrhardt
2021-12-14 12:08                       ` Ferruh Yigit
2021-12-14 13:57                         ` Christian Ehrhardt
2021-12-14 13:10                       ` Ferruh Yigit
2021-12-14 13:58                         ` Christian Ehrhardt [this message]
2021-12-14 14:46                           ` Christian Ehrhardt
2021-12-14 14:52                             ` Ferruh Yigit
2021-12-15 13:17                               ` Christian Ehrhardt
2021-12-15 14:44                                 ` Ferruh Yigit
2021-12-16  7:21                                   ` Christian Ehrhardt
2021-12-14  7:14 ` Jiang, YuX
2021-12-14  7:45   ` Christian Ehrhardt
2021-12-14  8:05     ` Christian Ehrhardt
2021-12-15 11:04   ` Jiang, YuX
2021-12-15 13:16     ` Christian Ehrhardt
2021-12-17  7:05     ` Jiang, YuX
2021-12-17  7:47       ` Christian Ehrhardt
2021-12-17 14:55         ` Richardson, Bruce
2021-12-17 15:48           ` Richardson, Bruce
2021-12-17 17:57             ` Christian Ehrhardt
2021-12-14 13:51 ` Pei Zhang
2021-12-14 13:52   ` Christian Ehrhardt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAATJJ0L1iEsEE6Bk0S93-PJpGUNdDnsJkHRY=-YNRzhAHJyZkQ@mail.gmail.com' \
    --to=christian.ehrhardt@canonical.com \
    --cc=Abhishek.Marathe@microsoft.com \
    --cc=akhil.goyal@nxp.com \
    --cc=alialnu@nvidia.com \
    --cc=benjamin.walker@intel.com \
    --cc=bluca@debian.org \
    --cc=dev@dpdk.org \
    --cc=drc@linux.vnet.ibm.com \
    --cc=ferruh.yigit@intel.com \
    --cc=hariprasad.govindharajan@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=ian.stokes@intel.com \
    --cc=jerinj@marvell.com \
    --cc=john.mcnamara@intel.com \
    --cc=juhlee@microsoft.com \
    --cc=kalesh-anakkur.purayil@broadcom.com \
    --cc=ktraynor@redhat.com \
    --cc=pezhang@redhat.com \
    --cc=pingx.yu@intel.com \
    --cc=qian.q.xu@intel.com \
    --cc=rasland@nvidia.com \
    --cc=stable@dpdk.org \
    --cc=thomas@monjalon.net \
    --cc=yuan.peng@intel.com \
    --cc=zhaoyan.chen@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).