From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Junfeng Guo <junfeng.guo@intel.com>,
qi.z.zhang@intel.com, jingjing.wu@intel.com,
beilei.xing@intel.com
Cc: dev@dpdk.org, Xiaoyun Li <xiaoyun.li@intel.com>
Subject: Re: [PATCH v9 09/14] net/idpf: add support for Rx/Tx offloading
Date: Fri, 21 Oct 2022 11:29:47 +0300 [thread overview]
Message-ID: <50504c08-fbb7-e0fa-0dae-dc2f58ff8b21@oktetlabs.ru> (raw)
In-Reply-To: <20221021051821.2164939-10-junfeng.guo@intel.com>
On 10/21/22 08:18, Junfeng Guo wrote:
> Add Rx/Tx offloading support, including TSO and CHKSUM.
Typically code path for Rx and Tx offload are absolutely
different. So, I'm wondering why both are implemented in
one patch. If they are really independent, please, split
it into Rx and Tx patches to make it easier to review.
>
> Signed-off-by: Beilei Xing <beilei.xing@intel.com>
> Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
> ---
> doc/guides/nics/features/idpf.ini | 3 +
> drivers/net/idpf/idpf_ethdev.c | 10 ++
> drivers/net/idpf/idpf_rxtx.c | 212 +++++++++++++++++++++++++++++-
> drivers/net/idpf/idpf_rxtx.h | 19 +++
> 4 files changed, 242 insertions(+), 2 deletions(-)
>
> diff --git a/doc/guides/nics/features/idpf.ini b/doc/guides/nics/features/idpf.ini
> index 79ffafc0d4..36dec39b9f 100644
> --- a/doc/guides/nics/features/idpf.ini
> +++ b/doc/guides/nics/features/idpf.ini
> @@ -10,6 +10,9 @@
> Queue start/stop = Y
> Runtime Rx queue setup = Y
> Runtime Tx queue setup = Y
> +TSO = P
> +L3 checksum offload = P
> +L4 checksum offload = P
> Packet type parsing = Y
> Multiprocess aware = Y
> FreeBSD = Y
> diff --git a/drivers/net/idpf/idpf_ethdev.c b/drivers/net/idpf/idpf_ethdev.c
> index c6d6c87274..ffde2ce7d1 100644
> --- a/drivers/net/idpf/idpf_ethdev.c
> +++ b/drivers/net/idpf/idpf_ethdev.c
> @@ -86,6 +86,16 @@ idpf_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
> dev_info->max_mac_addrs = IDPF_NUM_MACADDR_MAX;
> dev_info->dev_capa = RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP |
> RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP;
> + dev_info->rx_offload_capa =
> + RTE_ETH_RX_OFFLOAD_IPV4_CKSUM |
> + RTE_ETH_RX_OFFLOAD_UDP_CKSUM |
> + RTE_ETH_RX_OFFLOAD_TCP_CKSUM |
> + RTE_ETH_RX_OFFLOAD_OUTER_IPV4_CKSUM;
> +
> + dev_info->tx_offload_capa =
> + RTE_ETH_TX_OFFLOAD_TCP_TSO |
> + RTE_ETH_TX_OFFLOAD_MULTI_SEGS |
I guess this one is supported from the very begining
implementation of your datapath. If so, it should be reported
in the patch which adds the datapath implementation.
> + RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE;
RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE is not mentined anywhereelse
in the patch. Is it actually supported? How?
>
> dev_info->default_rxconf = (struct rte_eth_rxconf) {
> .rx_free_thresh = IDPF_DEFAULT_RX_FREE_THRESH,
> diff --git a/drivers/net/idpf/idpf_rxtx.c b/drivers/net/idpf/idpf_rxtx.c
> index 6280b7887b..31e266bbec 100644
> --- a/drivers/net/idpf/idpf_rxtx.c
> +++ b/drivers/net/idpf/idpf_rxtx.c
> @@ -1269,6 +1269,47 @@ idpf_stop_queues(struct rte_eth_dev *dev)
> }
> }
>
> +#define IDPF_RX_FLEX_DESC_ADV_STATUS0_XSUM_S \
> + (BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_IPE_S) | \
> + BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_L4E_S) | \
> + BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EIPE_S) | \
> + BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EUDPE_S))
> +
> +static inline uint64_t
> +idpf_splitq_rx_csum_offload(uint8_t err)
> +{
> + uint64_t flags = 0;
> +
> + if (unlikely(!(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_L3L4P_S))))
> + return flags;
> +
> + if (likely((err & IDPF_RX_FLEX_DESC_ADV_STATUS0_XSUM_S) == 0)) {
> + flags |= (RTE_MBUF_F_RX_IP_CKSUM_GOOD |
> + RTE_MBUF_F_RX_L4_CKSUM_GOOD);
> + return flags;
> + }
> +
> + if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_IPE_S)))
> + flags |= RTE_MBUF_F_RX_IP_CKSUM_BAD;
> + else
> + flags |= RTE_MBUF_F_RX_IP_CKSUM_GOOD;
> +
> + if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_L4E_S)))
> + flags |= RTE_MBUF_F_RX_L4_CKSUM_BAD;
> + else
> + flags |= RTE_MBUF_F_RX_L4_CKSUM_GOOD;
> +
> + if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EIPE_S)))
> + flags |= RTE_MBUF_F_RX_OUTER_IP_CKSUM_BAD;
> +
> + if (unlikely(err & BIT(VIRTCHNL2_RX_FLEX_DESC_ADV_STATUS0_XSUM_EUDPE_S)))
> + flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_BAD;
> + else
> + flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD;
> +
> + return flags;
> +}
> +
> static void
> idpf_split_rx_bufq_refill(struct idpf_rx_queue *rx_bufq)
> {
> @@ -1343,9 +1384,11 @@ idpf_splitq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
> uint16_t pktlen_gen_bufq_id;
> struct idpf_rx_queue *rxq;
> const uint32_t *ptype_tbl;
> + uint8_t status_err0_qw1;
> struct rte_mbuf *rxm;
> uint16_t rx_id_bufq1;
> uint16_t rx_id_bufq2;
> + uint64_t pkt_flags;
> uint16_t pkt_len;
> uint16_t bufq_id;
> uint16_t gen_id;
> @@ -1420,6 +1463,11 @@ idpf_splitq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
> VIRTCHNL2_RX_FLEX_DESC_ADV_PTYPE_M) >>
> VIRTCHNL2_RX_FLEX_DESC_ADV_PTYPE_S];
>
> + status_err0_qw1 = rx_desc->status_err0_qw1;
> + pkt_flags = idpf_splitq_rx_csum_offload(status_err0_qw1);
> +
> + rxm->ol_flags |= pkt_flags;
> +
> rx_pkts[nb_rx++] = rxm;
> }
>
> @@ -1496,6 +1544,49 @@ idpf_split_tx_free(struct idpf_tx_queue *cq)
> cq->tx_tail = next;
> }
>
> +/* Check if the context descriptor is needed for TX offloading */
> +static inline uint16_t
> +idpf_calc_context_desc(uint64_t flags)
> +{
> + if (flags & RTE_MBUF_F_TX_TCP_SEG)
> + return 1;
> +
> + return 0;
> +}
> +
> +/* set TSO context descriptor
> + */
> +static inline void
> +idpf_set_splitq_tso_ctx(struct rte_mbuf *mbuf,
> + union idpf_tx_offload tx_offload,
> + volatile union idpf_flex_tx_ctx_desc *ctx_desc)
> +{
> + uint16_t cmd_dtype;
> + uint32_t tso_len;
> + uint8_t hdr_len;
> +
> + if (!tx_offload.l4_len) {
> + PMD_TX_LOG(DEBUG, "L4 length set to 0");
> + return;
> + }
> +
> + hdr_len = tx_offload.l2_len +
> + tx_offload.l3_len +
> + tx_offload.l4_len;
> + cmd_dtype = IDPF_TX_DESC_DTYPE_FLEX_TSO_CTX |
> + IDPF_TX_FLEX_CTX_DESC_CMD_TSO;
> + tso_len = mbuf->pkt_len - hdr_len;
> +
> + ctx_desc->tso.qw1.cmd_dtype = rte_cpu_to_le_16(cmd_dtype);
> + ctx_desc->tso.qw0.hdr_len = hdr_len;
> + ctx_desc->tso.qw0.mss_rt =
> + rte_cpu_to_le_16((uint16_t)mbuf->tso_segsz &
> + IDPF_TXD_FLEX_CTX_MSS_RT_M);
> + ctx_desc->tso.qw0.flex_tlen =
> + rte_cpu_to_le_32(tso_len &
> + IDPF_TXD_FLEX_CTX_MSS_RT_M);
> +}
> +
> uint16_t
> idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> uint16_t nb_pkts)
> @@ -1504,11 +1595,14 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> volatile struct idpf_flex_tx_sched_desc *txr;
> volatile struct idpf_flex_tx_sched_desc *txd;
> struct idpf_tx_entry *sw_ring;
> + union idpf_tx_offload tx_offload = {0};
> struct idpf_tx_entry *txe, *txn;
> uint16_t nb_used, tx_id, sw_id;
> struct rte_mbuf *tx_pkt;
> uint16_t nb_to_clean;
> uint16_t nb_tx = 0;
> + uint64_t ol_flags;
> + uint16_t nb_ctx;
>
> if (unlikely(!txq) || unlikely(!txq->q_started))
> return nb_tx;
> @@ -1538,8 +1632,29 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
>
> if (txq->nb_free < tx_pkt->nb_segs)
> break;
> - nb_used = tx_pkt->nb_segs;
>
> + ol_flags = tx_pkt->ol_flags;
> + tx_offload.l2_len = tx_pkt->l2_len;
> + tx_offload.l3_len = tx_pkt->l3_len;
> + tx_offload.l4_len = tx_pkt->l4_len;
> + tx_offload.tso_segsz = tx_pkt->tso_segsz;
> + /* Calculate the number of context descriptors needed. */
> + nb_ctx = idpf_calc_context_desc(ol_flags);
> + nb_used = tx_pkt->nb_segs + nb_ctx;
> +
> + /* context descriptor */
> + if (nb_ctx) {
> + volatile union idpf_flex_tx_ctx_desc *ctx_desc =
> + (volatile union idpf_flex_tx_ctx_desc *)&txr[tx_id];
> +
> + if (ol_flags & RTE_MBUF_F_TX_TCP_SEG)
> + idpf_set_splitq_tso_ctx(tx_pkt, tx_offload,
> + ctx_desc);
> +
> + tx_id++;
> + if (tx_id == txq->nb_tx_desc)
> + tx_id = 0;
> + }
>
> do {
> txd = &txr[tx_id];
> @@ -1566,6 +1681,8 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
>
> if (unlikely(!(tx_id % 32)))
> txd->qw1.cmd_dtype |= IDPF_TXD_FLEX_FLOW_CMD_RE;
> + if (ol_flags & IDPF_TX_CKSUM_OFFLOAD_MASK)
> + txd->qw1.cmd_dtype |= IDPF_TXD_FLEX_FLOW_CMD_CS_EN;
> txq->nb_free = (uint16_t)(txq->nb_free - nb_used);
> txq->nb_used = (uint16_t)(txq->nb_used + nb_used);
> }
> @@ -1580,6 +1697,48 @@ idpf_splitq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> return nb_tx;
> }
>
> +#define IDPF_RX_FLEX_DESC_STATUS0_XSUM_S \
> + (BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_IPE_S) | \
> + BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_L4E_S) | \
> + BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S) | \
> + BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S))
> +
> +/* Translate the rx descriptor status and error fields to pkt flags */
> +static inline uint64_t
> +idpf_rxd_to_pkt_flags(uint16_t status_error)
> +{
> + uint64_t flags = 0;
> +
> + if (unlikely(!(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_L3L4P_S))))
> + return flags;
> +
> + if (likely((status_error & IDPF_RX_FLEX_DESC_STATUS0_XSUM_S) == 0)) {
> + flags |= (RTE_MBUF_F_RX_IP_CKSUM_GOOD |
Strictly speaking description of the
RTE_MBUF_F_RX_IP_CKSUM_GOOD says that IP checksum in the
patcket is valid, but there is no checksum in IPv6 header.
So, we can't say that it is valid for IPv6...
> + RTE_MBUF_F_RX_L4_CKSUM_GOOD);
> + return flags;
> + }
> +
> + if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_IPE_S)))
> + flags |= RTE_MBUF_F_RX_IP_CKSUM_BAD;
> + else
> + flags |= RTE_MBUF_F_RX_IP_CKSUM_GOOD;
> +
> + if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_L4E_S)))
> + flags |= RTE_MBUF_F_RX_L4_CKSUM_BAD;
> + else
> + flags |= RTE_MBUF_F_RX_L4_CKSUM_GOOD;
> +
> + if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EIPE_S)))
> + flags |= RTE_MBUF_F_RX_OUTER_IP_CKSUM_BAD;
> +
> + if (unlikely(status_error & BIT(VIRTCHNL2_RX_FLEX_DESC_STATUS0_XSUM_EUDPE_S)))
> + flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_BAD;
> + else
> + flags |= RTE_MBUF_F_RX_OUTER_L4_CKSUM_GOOD;
> +
> + return flags;
> +}
> +
> static inline void
> idpf_update_rx_tail(struct idpf_rx_queue *rxq, uint16_t nb_hold,
> uint16_t rx_id)
> @@ -1613,6 +1772,7 @@ idpf_singleq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
> struct rte_mbuf *rxm;
> struct rte_mbuf *nmb;
> uint16_t rx_status0;
> + uint64_t pkt_flags;
> uint64_t dma_addr;
> uint16_t nb_rx;
>
> @@ -1682,10 +1842,13 @@ idpf_singleq_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
> rxm->data_len = rx_packet_len;
> rxm->port = rxq->port_id;
> rxm->ol_flags = 0;
> + pkt_flags = idpf_rxd_to_pkt_flags(rx_status0);
> rxm->packet_type =
> ptype_tbl[(uint8_t)(rte_cpu_to_le_16(rxd.flex_nic_wb.ptype_flex_flags0) &
> VIRTCHNL2_RX_FLEX_DESC_PTYPE_M)];
>
> + rxm->ol_flags |= pkt_flags;
> +
>
> rx_pkts[nb_rx++] = rxm;
> }
> @@ -1748,14 +1911,17 @@ idpf_singleq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> {
> volatile struct idpf_flex_tx_desc *txd;
> volatile struct idpf_flex_tx_desc *txr;
> + union idpf_tx_offload tx_offload = {0};
> struct idpf_tx_entry *txe, *txn;
> struct idpf_tx_entry *sw_ring;
> struct idpf_tx_queue *txq;
> struct rte_mbuf *tx_pkt;
> struct rte_mbuf *m_seg;
> uint64_t buf_dma_addr;
> + uint64_t ol_flags;
> uint16_t tx_last;
> uint16_t nb_used;
> + uint16_t nb_ctx;
> uint16_t td_cmd;
> uint16_t tx_id;
> uint16_t nb_tx;
> @@ -1782,11 +1948,19 @@ idpf_singleq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> tx_pkt = *tx_pkts++;
> RTE_MBUF_PREFETCH_TO_FREE(txe->mbuf);
>
> + ol_flags = tx_pkt->ol_flags;
> + tx_offload.l2_len = tx_pkt->l2_len;
> + tx_offload.l3_len = tx_pkt->l3_len;
> + tx_offload.l4_len = tx_pkt->l4_len;
> + tx_offload.tso_segsz = tx_pkt->tso_segsz;
> + /* Calculate the number of context descriptors needed. */
> + nb_ctx = idpf_calc_context_desc(ol_flags);
> +
> /* The number of descriptors that must be allocated for
> * a packet equals to the number of the segments of that
> * packet plus 1 context descriptor if needed.
> */
> - nb_used = (uint16_t)(tx_pkt->nb_segs);
> + nb_used = (uint16_t)(tx_pkt->nb_segs + nb_ctx);
> tx_last = (uint16_t)(tx_id + nb_used - 1);
>
> /* Circular ring */
> @@ -1814,6 +1988,28 @@ idpf_singleq_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
> }
> }
>
> + if (nb_ctx) {
> + /* Setup TX context descriptor if required */
> + volatile union idpf_flex_tx_ctx_desc *ctx_txd =
> + (volatile union idpf_flex_tx_ctx_desc *)
> + &txr[tx_id];
> +
> + txn = &sw_ring[txe->next_id];
> + RTE_MBUF_PREFETCH_TO_FREE(txn->mbuf);
> + if (txe->mbuf) {
> + rte_pktmbuf_free_seg(txe->mbuf);
> + txe->mbuf = NULL;
> + }
> +
> + /* TSO enabled */
> + if (ol_flags & RTE_MBUF_F_TX_TCP_SEG)
> + idpf_set_splitq_tso_ctx(tx_pkt, tx_offload,
> + ctx_txd);
> +
> + txe->last_id = tx_last;
> + tx_id = txe->next_id;
> + txe = txn;
> + }
>
> m_seg = tx_pkt;
> do {
> @@ -1896,11 +2092,23 @@ idpf_prep_pkts(__rte_unused void *tx_queue, struct rte_mbuf **tx_pkts,
> return i;
> }
>
> + if (ol_flags & IDPF_TX_OFFLOAD_NOTSUP_MASK) {
> + rte_errno = ENOTSUP;
> + return i;
> + }
> +
> if (m->pkt_len < IDPF_MIN_FRAME_SIZE) {
> rte_errno = EINVAL;
> return i;
> }
>
> +#ifdef RTE_LIBRTE_ETHDEV_DEBUG
> + ret = rte_validate_tx_offload(m);
> + if (ret != 0) {
> + rte_errno = -ret;
> + return i;
> + }
> +#endif
> ret = rte_net_intel_cksum_prepare(m);
> if (ret != 0) {
> rte_errno = -ret;
> diff --git a/drivers/net/idpf/idpf_rxtx.h b/drivers/net/idpf/idpf_rxtx.h
> index bd3ebe2f50..a2394ffa2c 100644
> --- a/drivers/net/idpf/idpf_rxtx.h
> +++ b/drivers/net/idpf/idpf_rxtx.h
> @@ -44,6 +44,25 @@
> #define IDPF_MAX_TSO_FRAME_SIZE 262143
> #define IDPF_TX_MAX_MTU_SEG 10
>
> +#define IDPF_TX_CKSUM_OFFLOAD_MASK ( \
> + RTE_MBUF_F_TX_IP_CKSUM | \
> + RTE_MBUF_F_TX_L4_MASK | \
> + RTE_MBUF_F_TX_TCP_SEG)
> +
> +#define IDPF_TX_OFFLOAD_MASK ( \
> + RTE_MBUF_F_TX_OUTER_IPV6 | \
> + RTE_MBUF_F_TX_OUTER_IPV4 | \
> + RTE_MBUF_F_TX_IPV6 | \
> + RTE_MBUF_F_TX_IPV4 | \
> + RTE_MBUF_F_TX_VLAN | \
VLAN insertion offload is not supported yet.
> + RTE_MBUF_F_TX_IP_CKSUM | \
> + RTE_MBUF_F_TX_L4_MASK | \
> + RTE_MBUF_F_TX_TCP_SEG | \
> + RTE_ETH_TX_OFFLOAD_SECURITY)
What is RTE_ETH_TX_OFFLOAD_SECURITY doing in mbuf flags?
> +
> +#define IDPF_TX_OFFLOAD_NOTSUP_MASK \
> + (RTE_MBUF_F_TX_OFFLOAD_MASK ^ IDPF_TX_OFFLOAD_MASK)
> +
> #define IDPF_GET_PTYPE_SIZE(p) \
> (sizeof(struct virtchnl2_ptype) + \
> (((p)->proto_id_count ? ((p)->proto_id_count - 1) : 0) * sizeof((p)->proto_id[0])))
next prev parent reply other threads:[~2022-10-21 8:29 UTC|newest]
Thread overview: 376+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-03 11:30 [PATCH 00/13] add support for idpf PMD in DPDK Junfeng Guo
2022-08-03 11:30 ` [PATCH 01/13] net/idpf/base: introduce base code Junfeng Guo
2022-08-03 11:30 ` [PATCH 02/13] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-08-03 11:30 ` [PATCH 03/13] net/idpf: support device initialization Junfeng Guo
2022-08-03 15:11 ` Stephen Hemminger
2022-08-08 4:43 ` Guo, Junfeng
2022-10-31 18:00 ` Ali Alnubani
2022-11-01 6:55 ` Xing, Beilei
2022-11-02 15:31 ` Raslan Darawsheh
2022-11-02 15:52 ` Thomas Monjalon
2022-11-03 0:56 ` Xing, Beilei
2022-08-03 11:30 ` [PATCH 04/13] net/idpf: add queue operations Junfeng Guo
2022-08-03 15:16 ` Stephen Hemminger
2022-08-08 4:44 ` Guo, Junfeng
2022-08-03 11:30 ` [PATCH 05/13] net/idpf: add support to get device information Junfeng Guo
2022-08-03 11:30 ` [PATCH 06/13] net/idpf: add support to get packet type Junfeng Guo
2022-08-03 11:30 ` [PATCH 07/13] net/idpf: add support to update link status Junfeng Guo
2022-08-03 11:30 ` [PATCH 08/13] net/idpf: add basic Rx/Tx datapath Junfeng Guo
2022-08-03 11:31 ` [PATCH 09/13] net/idpf: add support for RSS Junfeng Guo
2022-08-03 11:31 ` [PATCH 10/13] net/idpf: add mtu configuration Junfeng Guo
2022-08-03 11:31 ` [PATCH 11/13] net/idpf: add hw statistics Junfeng Guo
2022-08-03 11:31 ` [PATCH 12/13] net/idpf: support write back based on ITR expire Junfeng Guo
2022-08-03 11:31 ` [PATCH 13/13] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 01/14] net/idpf/base: introduce base code Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 02/14] net/idpf/base: add logs and OS specific implementation Junfeng Guo
2022-10-03 13:20 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-12 8:07 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 03/14] net/idpf: add support for device initialization Junfeng Guo
2022-09-21 5:41 ` Xing, Beilei
2022-09-21 6:04 ` Xing, Beilei
2022-10-03 13:44 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-10-10 7:48 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 04/14] net/idpf: add support for queue operations Junfeng Guo
2022-10-03 13:47 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 05/14] net/idpf: add support for device information get Junfeng Guo
2022-10-03 13:53 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 06/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-03 13:58 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 07/14] net/idpf: add support for link status update Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-03 14:02 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 09/14] net/idpf: add support for RSS Junfeng Guo
2022-10-03 14:10 ` Andrew Rybchenko
2022-09-05 10:58 ` [PATCH v2 10/14] net/idpf: add support for mtu configuration Junfeng Guo
2022-10-03 14:12 ` Andrew Rybchenko
2022-10-14 9:18 ` Guo, Junfeng
2022-09-05 10:58 ` [PATCH v2 11/14] net/idpf: add support for hw statistics Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-09-05 10:58 ` [PATCH v2 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-03 14:20 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 8:06 ` Wu, Wenjun1
2022-09-05 10:58 ` [PATCH v2 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-03 14:22 ` Andrew Rybchenko
2022-10-14 9:19 ` Guo, Junfeng
2022-10-10 7:56 ` Wu, Wenjun1
2022-10-03 13:31 ` [PATCH v2 00/14] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-03 14:36 ` Andrew Rybchenko
2022-10-18 11:09 ` Guo, Junfeng
2022-10-18 11:12 ` [PATCH v3 00/15] " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 01/15] common/idpf: introduce common library Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 2:41 ` [PATCH v7 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 01/14] common/idpf: introduce common library Junfeng Guo
2022-10-21 6:40 ` Andrew Rybchenko
2022-10-21 12:35 ` Xing, Beilei
2022-10-21 12:38 ` Andrew Rybchenko
2022-10-21 12:46 ` Zhang, Qi Z
2022-10-24 13:01 ` [PATCH v10 00/14] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 01/14] net/idpf: add support for device start and stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 00/18] add support for idpf PMD in DPDK Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 01/18] common/idpf: introduce common library Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-28 15:35 ` Andrew Rybchenko
2022-10-28 17:22 ` Xing, Beilei
2022-10-27 7:47 ` [PATCH v14 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-28 15:45 ` Andrew Rybchenko
2022-10-27 7:47 ` [PATCH v14 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-28 15:50 ` Andrew Rybchenko
2022-10-28 17:34 ` Xing, Beilei
2022-10-27 7:47 ` [PATCH v14 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 7:47 ` [PATCH v14 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-29 3:27 ` [PATCH v15 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-29 3:27 ` [PATCH v15 01/18] common/idpf: introduce common library beilei.xing
2022-10-29 3:27 ` [PATCH v15 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-29 3:27 ` [PATCH v15 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-29 3:27 ` [PATCH v15 04/18] net/idpf: add Rx " beilei.xing
2022-10-29 3:27 ` [PATCH v15 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 06/18] net/idpf: add support for queue start beilei.xing
2022-10-29 3:27 ` [PATCH v15 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-29 3:27 ` [PATCH v15 08/18] net/idpf: add queue release beilei.xing
2022-10-29 3:27 ` [PATCH v15 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-29 3:27 ` [PATCH v15 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-29 3:27 ` [PATCH v15 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-29 3:27 ` [PATCH v15 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-29 3:27 ` [PATCH v15 14/18] net/idpf: add support for RSS beilei.xing
2022-10-29 3:27 ` [PATCH v15 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-29 3:27 ` [PATCH v15 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-29 3:27 ` [PATCH v15 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-29 14:48 ` [PATCH v15 00/18] add support for idpf PMD in DPDK Andrew Rybchenko
2022-10-31 2:26 ` Xing, Beilei
2022-10-31 3:36 ` [PATCH v16 " beilei.xing
2022-10-31 3:36 ` [PATCH v16 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 3:36 ` [PATCH v16 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 3:36 ` [PATCH v16 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 3:36 ` [PATCH v16 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 3:36 ` [PATCH v16 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 3:36 ` [PATCH v16 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 3:36 ` [PATCH v16 08/18] net/idpf: add queue release beilei.xing
2022-10-31 3:36 ` [PATCH v16 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 3:36 ` [PATCH v16 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 3:36 ` [PATCH v16 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 3:36 ` [PATCH v16 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 3:36 ` [PATCH v16 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 3:36 ` [PATCH v16 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 3:36 ` [PATCH v16 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 3:36 ` [PATCH v16 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 5:15 ` [PATCH v17 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 5:15 ` [PATCH v17 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 5:15 ` [PATCH v17 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 5:15 ` [PATCH v17 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 5:15 ` [PATCH v17 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 5:15 ` [PATCH v17 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 5:15 ` [PATCH v17 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 5:15 ` [PATCH v17 08/18] net/idpf: add queue release beilei.xing
2022-10-31 5:15 ` [PATCH v17 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 5:15 ` [PATCH v17 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 5:15 ` [PATCH v17 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 5:15 ` [PATCH v17 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 5:15 ` [PATCH v17 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 5:15 ` [PATCH v17 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 5:15 ` [PATCH v17 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 5:15 ` [PATCH v17 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 8:33 ` [PATCH v18 00/18] add support for idpf PMD in DPDK beilei.xing
2022-10-31 8:33 ` [PATCH v18 01/18] common/idpf: introduce common library beilei.xing
2022-10-31 8:33 ` [PATCH v18 02/18] net/idpf: add support for device initialization beilei.xing
2022-10-31 8:33 ` [PATCH v18 03/18] net/idpf: add Tx queue setup beilei.xing
2022-10-31 8:33 ` [PATCH v18 04/18] net/idpf: add Rx " beilei.xing
2022-10-31 8:33 ` [PATCH v18 05/18] net/idpf: add support for device start and stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 06/18] net/idpf: add support for queue start beilei.xing
2022-10-31 8:33 ` [PATCH v18 07/18] net/idpf: add support for queue stop beilei.xing
2022-10-31 8:33 ` [PATCH v18 08/18] net/idpf: add queue release beilei.xing
2022-10-31 8:33 ` [PATCH v18 09/18] net/idpf: add support for MTU configuration beilei.xing
2022-10-31 8:33 ` [PATCH v18 10/18] net/idpf: add support for basic Rx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 11/18] net/idpf: add support for basic Tx datapath beilei.xing
2022-10-31 8:33 ` [PATCH v18 12/18] net/idpf: support parsing packet type beilei.xing
2022-10-31 8:33 ` [PATCH v18 13/18] net/idpf: add support for write back based on ITR expire beilei.xing
2022-10-31 8:33 ` [PATCH v18 14/18] net/idpf: add support for RSS beilei.xing
2022-10-31 8:33 ` [PATCH v18 15/18] net/idpf: add support for Rx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 16/18] net/idpf: add support for Tx offloading beilei.xing
2022-10-31 8:33 ` [PATCH v18 17/18] net/idpf: add AVX512 data path for single queue model beilei.xing
2022-10-31 8:33 ` [PATCH v18 18/18] net/idpf: add support for timestamp offload beilei.xing
2022-10-31 13:38 ` [PATCH v18 00/18] add support for idpf PMD in DPDK Thomas Monjalon
2022-10-27 5:44 ` [PATCH v13 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 08/18] net/idpf: add queue release Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-27 5:44 ` [PATCH v13 12/18] net/idpf: support parsing packet type Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-27 5:45 ` [PATCH v13 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 08/18] net/idpf: add queue release Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 09/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 10/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 11/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 12/18] net/idpf: support packet type get Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-26 10:10 ` [PATCH v12 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 02/18] net/idpf: add support for device initialization Junfeng Guo
2022-10-25 8:57 ` Andrew Rybchenko
2022-10-26 8:28 ` Xing, Beilei
2022-10-28 15:14 ` Andrew Rybchenko
2022-10-28 17:19 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 03/18] net/idpf: add Tx queue setup Junfeng Guo
2022-10-25 9:40 ` Andrew Rybchenko
2022-10-26 8:34 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 04/18] net/idpf: add Rx " Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 05/18] net/idpf: add support for device start and stop Junfeng Guo
2022-10-25 9:49 ` Andrew Rybchenko
2022-10-26 8:38 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 06/18] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 07/18] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 08/18] net/idpf: add queue release Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 09/18] net/idpf: add support for packet type get Junfeng Guo
2022-10-25 9:57 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 10/18] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 11/18] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 12/18] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-25 10:12 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 13/18] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 14/18] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 15/18] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-25 10:03 ` Andrew Rybchenko
2022-10-28 1:48 ` Xing, Beilei
2022-10-24 13:12 ` [PATCH v11 16/18] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-25 10:14 ` Andrew Rybchenko
2022-10-24 13:12 ` [PATCH v11 17/18] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:12 ` [PATCH v11 18/18] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 02/14] net/idpf: add support for queue start Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 03/14] net/idpf: add support for queue stop Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 04/14] net/idpf: add queue release Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 05/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 06/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 07/14] net/idpf: add support for basic Rx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 08/14] net/idpf: add support for basic Tx datapath Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 09/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 11/14] net/idpf: add support for Rx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 12/14] net/idpf: add support for Tx offloading Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-24 13:01 ` [PATCH v10 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-21 7:39 ` Andrew Rybchenko
2022-10-21 7:48 ` Andrew Rybchenko
2022-10-21 12:41 ` Zhang, Qi Z
2022-10-25 7:52 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-21 7:44 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-21 7:53 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-21 7:56 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-21 8:00 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-21 8:29 ` Andrew Rybchenko [this message]
2022-10-24 13:26 ` Xing, Beilei
2022-10-21 5:18 ` [PATCH v9 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-21 8:38 ` Andrew Rybchenko
2022-10-21 5:18 ` [PATCH v9 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-21 5:18 ` [PATCH v9 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-20 6:29 ` [PATCH v8 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 14:54 ` [PATCH v6 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 11:03 ` [PATCH v5 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 02/14] net/idpf: add support for device initialization Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 03/14] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 04/14] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 05/14] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 06/14] net/idpf: add support for device information get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 07/14] net/idpf: add support for packet type get Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 08/14] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 09/14] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 10/14] net/idpf: add support for RSS Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 11/14] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 12/14] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 13/14] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-19 10:37 ` [PATCH v4 14/14] net/idpf: add support for timestamp offload Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 02/15] net/idpf: add support for device initialization Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 03/15] net/idpf: add queue setup and release in single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 04/15] net/idpf: add queue setup and release in split " Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 05/15] net/idpf: add support for queue start and stop Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 06/15] net/idpf: add support for device information get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 07/15] net/idpf: add support for packet type get Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 08/15] net/idpf: add support for link status update Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 09/15] net/idpf: add support for basic Rx/Tx datapath Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 10/15] net/idpf: add support for Rx/Tx offloading Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 11/15] net/idpf: add support for RSS Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 12/15] net/idpf: add support for MTU configuration Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 13/15] net/idpf: add support for write back based on ITR expire Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 14/15] net/idpf: add AVX512 data path for single queue model Junfeng Guo
2022-10-18 11:12 ` [PATCH v3 15/15] net/idpf: add support for timestamp offload Junfeng Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50504c08-fbb7-e0fa-0dae-dc2f58ff8b21@oktetlabs.ru \
--to=andrew.rybchenko@oktetlabs.ru \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jingjing.wu@intel.com \
--cc=junfeng.guo@intel.com \
--cc=qi.z.zhang@intel.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).