[dpdk-dev] [PATCH v3 0/7] add mtu and flow control handlers

[dpdk-dev] [PATCH v3 0/7] add mtu and flow control handlers

[David Marchand]

This patchset introduces 3 new ethdev operations: flow control parameters
retrieval and mtu get/set operations.

Changes since v1:
- compute min rx buffer size at ethdev level (to simplify pmd mtu checks)
- introduce enable_scatter rx mode so that we can advise pmd to configure
  scatter mode
- rework mtu get/set operations (based on Konstantin comments)
- pass checkpatch.pl checks

Changes since v2:
- rebase on top of master
- fix min_rx_buf_size computation (patch 3)
- fix frame size checks for ixgbe so that vlan and double vlan frames can be
  received (patch 5 and 6)
- add a new ETHER_MIN_MTU macro in rte_ether.h (patch 5 and 6)


-- 
David Marchand

David Marchand (3):
  ethdev: add autoneg parameter in flow ctrl accessors
  ethdev: store min rx buffer size
  ethdev: introduce enable_scatter rx mode

Ivan Boule (2):
  ixgbe: add set_mtu to ixgbevf
  app/testpmd: allow to configure mtu

Samuel Gauthier (1):
  ethdev: add mtu accessors

Zijie Pan (1):
  ethdev: retrieve flow control configuration

 app/test-pmd/cmdline.c              |   54 +++++++++++++
 app/test-pmd/config.c               |   13 ++++
 app/test-pmd/testpmd.h              |    2 +-
 lib/librte_ether/rte_ethdev.c       |   77 +++++++++++++++++--
 lib/librte_ether/rte_ethdev.h       |   65 +++++++++++++++-
 lib/librte_ether/rte_ether.h        |    2 +
 lib/librte_pmd_e1000/em_ethdev.c    |   89 +++++++++++++++++++++
 lib/librte_pmd_e1000/em_rxtx.c      |    5 ++
 lib/librte_pmd_e1000/igb_ethdev.c   |  100 ++++++++++++++++++++++++
 lib/librte_pmd_e1000/igb_rxtx.c     |   10 +++
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |  145 ++++++++++++++++++++++++++++++++++-
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |   27 ++++++-
 12 files changed, 573 insertions(+), 16 deletions(-)

-- 
1.7.10.4

[dpdk-dev] [PATCH v3 1/7] ethdev: retrieve flow control configuration

[David Marchand]

From: Zijie Pan <zijie.pan@6wind.com>

This patch adds a new function in ethdev api to retrieve current flow control
configuration.
This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.

Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_ether/rte_ethdev.c       |   16 ++++++++++
 lib/librte_ether/rte_ethdev.h       |   24 +++++++++++++--
 lib/librte_pmd_e1000/em_ethdev.c    |   44 ++++++++++++++++++++++++++++
 lib/librte_pmd_e1000/igb_ethdev.c   |   44 ++++++++++++++++++++++++++++
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   55 +++++++++++++++++++++++++++++++++--
 5 files changed, 179 insertions(+), 4 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 66eb266..9b9d5f6 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1637,6 +1637,22 @@ rte_eth_dev_fdir_set_masks(uint8_t port_id, struct rte_fdir_masks *fdir_mask)
 }
 
 int
+rte_eth_dev_flow_ctrl_get(uint8_t port_id, struct rte_eth_fc_conf *fc_conf)
+{
+	struct rte_eth_dev *dev;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return (-ENODEV);
+	}
+
+	dev = &rte_eth_devices[port_id];
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->flow_ctrl_get, -ENOTSUP);
+	memset(fc_conf, 0, sizeof(*fc_conf));
+	return (*dev->dev_ops->flow_ctrl_get)(dev, fc_conf);
+}
+
+int
 rte_eth_dev_flow_ctrl_set(uint8_t port_id, struct rte_eth_fc_conf *fc_conf)
 {
 	struct rte_eth_dev *dev;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 1dd1d39..1e0564d 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1140,8 +1140,12 @@ typedef int (*fdir_set_masks_t)(struct rte_eth_dev *dev,
 				struct rte_fdir_masks *fdir_masks);
 /**< @internal Setup flow director masks on an Ethernet device */
 
+typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
+			       struct rte_eth_fc_conf *fc_conf);
+/**< @internal Get current flow control parameter on an Ethernet device */
+
 typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev,
-				struct rte_eth_fc_conf *fc_conf);
+			       struct rte_eth_fc_conf *fc_conf);
 /**< @internal Setup flow control parameter on an Ethernet device */
 
 typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev,
@@ -1389,6 +1393,7 @@ struct eth_dev_ops {
 	eth_queue_release_t        tx_queue_release;/**< Release TX queue.*/
 	eth_dev_led_on_t           dev_led_on;    /**< Turn on LED. */
 	eth_dev_led_off_t          dev_led_off;   /**< Turn off LED. */
+	flow_ctrl_get_t            flow_ctrl_get; /**< Get flow control. */
 	flow_ctrl_set_t            flow_ctrl_set; /**< Setup flow control. */
 	priority_flow_ctrl_set_t   priority_flow_ctrl_set; /**< Setup priority flow control.*/
 	eth_mac_addr_remove_t      mac_addr_remove; /**< Remove MAC address */
@@ -2701,6 +2706,21 @@ int  rte_eth_led_on(uint8_t port_id);
 int  rte_eth_led_off(uint8_t port_id);
 
 /**
+ * Get current status of the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param fc_conf
+ *   The pointer to the structure where to store the flow control parameters.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support flow control.
+ *   - (-ENODEV)  if *port_id* invalid.
+ */
+int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
+			      struct rte_eth_fc_conf *fc_conf);
+
+/**
  * Configure the Ethernet link flow control for Ethernet device
  *
  * @param port_id
@@ -2715,7 +2735,7 @@ int  rte_eth_led_off(uint8_t port_id);
  *   - (-EIO)     if flow control setup failure
  */
 int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
-				struct rte_eth_fc_conf *fc_conf);
+			      struct rte_eth_fc_conf *fc_conf);
 
 /**
  * Configure the Ethernet priority flow control under DCB environment
diff --git a/lib/librte_pmd_e1000/em_ethdev.c b/lib/librte_pmd_e1000/em_ethdev.c
index dc0082f..58efcdf 100644
--- a/lib/librte_pmd_e1000/em_ethdev.c
+++ b/lib/librte_pmd_e1000/em_ethdev.c
@@ -77,6 +77,8 @@ static void eth_em_stats_get(struct rte_eth_dev *dev,
 static void eth_em_stats_reset(struct rte_eth_dev *dev);
 static void eth_em_infos_get(struct rte_eth_dev *dev,
 				struct rte_eth_dev_info *dev_info);
+static int eth_em_flow_ctrl_get(struct rte_eth_dev *dev,
+				struct rte_eth_fc_conf *fc_conf);
 static int eth_em_flow_ctrl_set(struct rte_eth_dev *dev,
 				struct rte_eth_fc_conf *fc_conf);
 static int eth_em_interrupt_setup(struct rte_eth_dev *dev);
@@ -153,6 +155,7 @@ static struct eth_dev_ops eth_em_ops = {
 	.tx_queue_release     = eth_em_tx_queue_release,
 	.dev_led_on           = eth_em_led_on,
 	.dev_led_off          = eth_em_led_off,
+	.flow_ctrl_get        = eth_em_flow_ctrl_get,
 	.flow_ctrl_set        = eth_em_flow_ctrl_set,
 	.mac_addr_add         = eth_em_rar_set,
 	.mac_addr_remove      = eth_em_rar_clear,
@@ -1363,6 +1366,47 @@ eth_em_led_off(struct rte_eth_dev *dev)
 }
 
 static int
+eth_em_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	struct e1000_hw *hw;
+	uint32_t ctrl;
+	int tx_pause;
+	int rx_pause;
+
+	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	fc_conf->pause_time = hw->fc.pause_time;
+	fc_conf->high_water = hw->fc.high_water;
+	fc_conf->low_water = hw->fc.low_water;
+	fc_conf->send_xon = hw->fc.send_xon;
+
+	/*
+	 * Return rx_pause and tx_pause status according to actual setting of
+	 * the TFCE and RFCE bits in the CTRL register.
+	 */
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	if (ctrl & E1000_CTRL_TFCE)
+		tx_pause = 1;
+	else
+		tx_pause = 0;
+
+	if (ctrl & E1000_CTRL_RFCE)
+		rx_pause = 1;
+	else
+		rx_pause = 0;
+
+	if (rx_pause && tx_pause)
+		fc_conf->mode = RTE_FC_FULL;
+	else if (rx_pause)
+		fc_conf->mode = RTE_FC_RX_PAUSE;
+	else if (tx_pause)
+		fc_conf->mode = RTE_FC_TX_PAUSE;
+	else
+		fc_conf->mode = RTE_FC_NONE;
+
+	return 0;
+}
+
+static int
 eth_em_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 {
 	struct e1000_hw *hw;
diff --git a/lib/librte_pmd_e1000/igb_ethdev.c b/lib/librte_pmd_e1000/igb_ethdev.c
index ae7e03b..92ac4a8 100644
--- a/lib/librte_pmd_e1000/igb_ethdev.c
+++ b/lib/librte_pmd_e1000/igb_ethdev.c
@@ -72,6 +72,8 @@ static void eth_igb_stats_get(struct rte_eth_dev *dev,
 static void eth_igb_stats_reset(struct rte_eth_dev *dev);
 static void eth_igb_infos_get(struct rte_eth_dev *dev,
 				struct rte_eth_dev_info *dev_info);
+static int  eth_igb_flow_ctrl_get(struct rte_eth_dev *dev,
+				struct rte_eth_fc_conf *fc_conf);
 static int  eth_igb_flow_ctrl_set(struct rte_eth_dev *dev,
 				struct rte_eth_fc_conf *fc_conf);
 static int eth_igb_lsc_interrupt_setup(struct rte_eth_dev *dev);
@@ -227,6 +229,7 @@ static struct eth_dev_ops eth_igb_ops = {
 	.tx_queue_release     = eth_igb_tx_queue_release,
 	.dev_led_on           = eth_igb_led_on,
 	.dev_led_off          = eth_igb_led_off,
+	.flow_ctrl_get        = eth_igb_flow_ctrl_get,
 	.flow_ctrl_set        = eth_igb_flow_ctrl_set,
 	.mac_addr_add         = eth_igb_rar_set,
 	.mac_addr_remove      = eth_igb_rar_clear,
@@ -1856,6 +1859,47 @@ eth_igb_led_off(struct rte_eth_dev *dev)
 }
 
 static int
+eth_igb_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	struct e1000_hw *hw;
+	uint32_t ctrl;
+	int tx_pause;
+	int rx_pause;
+
+	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	fc_conf->pause_time = hw->fc.pause_time;
+	fc_conf->high_water = hw->fc.high_water;
+	fc_conf->low_water = hw->fc.low_water;
+	fc_conf->send_xon = hw->fc.send_xon;
+
+	/*
+	 * Return rx_pause and tx_pause status according to actual setting of
+	 * the TFCE and RFCE bits in the CTRL register.
+	 */
+	ctrl = E1000_READ_REG(hw, E1000_CTRL);
+	if (ctrl & E1000_CTRL_TFCE)
+		tx_pause = 1;
+	else
+		tx_pause = 0;
+
+	if (ctrl & E1000_CTRL_RFCE)
+		rx_pause = 1;
+	else
+		rx_pause = 0;
+
+	if (rx_pause && tx_pause)
+		fc_conf->mode = RTE_FC_FULL;
+	else if (rx_pause)
+		fc_conf->mode = RTE_FC_RX_PAUSE;
+	else if (tx_pause)
+		fc_conf->mode = RTE_FC_TX_PAUSE;
+	else
+		fc_conf->mode = RTE_FC_NONE;
+
+	return 0;
+}
+
+static int
 eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 {
 	struct e1000_hw *hw;
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index fbeb1f4..f130080 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -134,8 +134,10 @@ static void ixgbe_vlan_hw_extend_disable(struct rte_eth_dev *dev);
 
 static int ixgbe_dev_led_on(struct rte_eth_dev *dev);
 static int ixgbe_dev_led_off(struct rte_eth_dev *dev);
-static int  ixgbe_flow_ctrl_set(struct rte_eth_dev *dev,
-		struct rte_eth_fc_conf *fc_conf);
+static int ixgbe_flow_ctrl_get(struct rte_eth_dev *dev,
+			       struct rte_eth_fc_conf *fc_conf);
+static int ixgbe_flow_ctrl_set(struct rte_eth_dev *dev,
+			       struct rte_eth_fc_conf *fc_conf);
 static int ixgbe_priority_flow_ctrl_set(struct rte_eth_dev *dev,
 		struct rte_eth_pfc_conf *pfc_conf);
 static int ixgbe_dev_rss_reta_update(struct rte_eth_dev *dev,
@@ -307,6 +309,7 @@ static struct eth_dev_ops ixgbe_eth_dev_ops = {
 	.tx_queue_release     = ixgbe_dev_tx_queue_release,
 	.dev_led_on           = ixgbe_dev_led_on,
 	.dev_led_off          = ixgbe_dev_led_off,
+	.flow_ctrl_get        = ixgbe_flow_ctrl_get,
 	.flow_ctrl_set        = ixgbe_flow_ctrl_set,
 	.priority_flow_ctrl_set = ixgbe_priority_flow_ctrl_set,
 	.mac_addr_add         = ixgbe_add_rar,
@@ -2292,6 +2295,54 @@ ixgbe_dev_led_off(struct rte_eth_dev *dev)
 }
 
 static int
+ixgbe_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	struct ixgbe_hw *hw;
+	uint32_t mflcn_reg;
+	uint32_t fccfg_reg;
+	int rx_pause;
+	int tx_pause;
+
+	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	fc_conf->pause_time = hw->fc.pause_time;
+	fc_conf->high_water = hw->fc.high_water[0];
+	fc_conf->low_water = hw->fc.low_water[0];
+	fc_conf->send_xon = hw->fc.send_xon;
+
+	/*
+	 * Return rx_pause status according to actual setting of
+	 * MFLCN register.
+	 */
+	mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+	if (mflcn_reg & (IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_RFCE))
+		rx_pause = 1;
+	else
+		rx_pause = 0;
+
+	/*
+	 * Return tx_pause status according to actual setting of
+	 * FCCFG register.
+	 */
+	fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+	if (fccfg_reg & (IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY))
+		tx_pause = 1;
+	else
+		tx_pause = 0;
+
+	if (rx_pause && tx_pause)
+		fc_conf->mode = RTE_FC_FULL;
+	else if (rx_pause)
+		fc_conf->mode = RTE_FC_RX_PAUSE;
+	else if (tx_pause)
+		fc_conf->mode = RTE_FC_TX_PAUSE;
+	else
+		fc_conf->mode = RTE_FC_NONE;
+
+	return 0;
+}
+
+static int
 ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 {
 	struct ixgbe_hw *hw;
-- 
1.7.10.4

[dpdk-dev] [PATCH v3 2/7] ethdev: add autoneg parameter in flow ctrl accessors

[David Marchand]

Add autoneg field in flow control parameters.
This makes it easier to understand why changing some parameters does not always
have the expected result.

Changing autoneg is not supported at the moment.

Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_ether/rte_ethdev.h       |    1 +
 lib/librte_pmd_e1000/em_ethdev.c    |    3 +++
 lib/librte_pmd_e1000/igb_ethdev.c   |    3 +++
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |    3 +++
 4 files changed, 10 insertions(+)

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 1e0564d..a410afd 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -649,6 +649,7 @@ struct rte_eth_fc_conf {
 	uint16_t send_xon;    /**< Is XON frame need be sent */
 	enum rte_eth_fc_mode mode;  /**< Link flow control mode */
 	uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
+	uint8_t autoneg;      /**< Use Pause autoneg */
 };
 
 /**
diff --git a/lib/librte_pmd_e1000/em_ethdev.c b/lib/librte_pmd_e1000/em_ethdev.c
index 58efcdf..7913ff0 100644
--- a/lib/librte_pmd_e1000/em_ethdev.c
+++ b/lib/librte_pmd_e1000/em_ethdev.c
@@ -1378,6 +1378,7 @@ eth_em_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water;
 	fc_conf->low_water = hw->fc.low_water;
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = hw->mac.autoneg;
 
 	/*
 	 * Return rx_pause and tx_pause status according to actual setting of
@@ -1422,6 +1423,8 @@ eth_em_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	uint32_t rctl;
 
 	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != hw->mac.autoneg)
+		return -ENOTSUP;
 	rx_buf_size = em_get_rx_buffer_size(hw);
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
diff --git a/lib/librte_pmd_e1000/igb_ethdev.c b/lib/librte_pmd_e1000/igb_ethdev.c
index 92ac4a8..c92b737 100644
--- a/lib/librte_pmd_e1000/igb_ethdev.c
+++ b/lib/librte_pmd_e1000/igb_ethdev.c
@@ -1871,6 +1871,7 @@ eth_igb_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water;
 	fc_conf->low_water = hw->fc.low_water;
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = hw->mac.autoneg;
 
 	/*
 	 * Return rx_pause and tx_pause status according to actual setting of
@@ -1915,6 +1916,8 @@ eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	uint32_t rctl;
 
 	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != hw->mac.autoneg)
+		return -ENOTSUP;
 	rx_buf_size = igb_get_rx_buffer_size(hw);
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index f130080..559d246 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -2309,6 +2309,7 @@ ixgbe_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water[0];
 	fc_conf->low_water = hw->fc.low_water[0];
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = !hw->fc.disable_fc_autoneg;
 
 	/*
 	 * Return rx_pause status according to actual setting of
@@ -2360,6 +2361,8 @@ ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	PMD_INIT_FUNC_TRACE();
 
 	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != !hw->fc.disable_fc_autoneg)
+		return -ENOTSUP;
 	rx_buf_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0));
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
-- 
1.7.10.4

[dpdk-dev] [PATCH v3 3/7] ethdev: store min rx buffer size

[David Marchand]

This avoids code duplication in PMD when dealing with mtu changes.

Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_ether/rte_ethdev.c |   20 +++++++++++++++-----
 lib/librte_ether/rte_ethdev.h |    3 +++
 2 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 9b9d5f6..9061c7d 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -884,6 +884,8 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
 		       const struct rte_eth_rxconf *rx_conf,
 		       struct rte_mempool *mp)
 {
+	int ret;
+	uint32_t mbp_buf_size;
 	struct rte_eth_dev *dev;
 	struct rte_pktmbuf_pool_private *mbp_priv;
 	struct rte_eth_dev_info dev_info;
@@ -924,13 +926,14 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
 		return (-ENOSPC);
 	}
 	mbp_priv = rte_mempool_get_priv(mp);
-	if ((uint32_t) (mbp_priv->mbuf_data_room_size - RTE_PKTMBUF_HEADROOM) <
-	    dev_info.min_rx_bufsize) {
+	mbp_buf_size = mbp_priv->mbuf_data_room_size;
+
+	if ((mbp_buf_size - RTE_PKTMBUF_HEADROOM) < dev_info.min_rx_bufsize) {
 		PMD_DEBUG_TRACE("%s mbuf_data_room_size %d < %d "
 				"(RTE_PKTMBUF_HEADROOM=%d + min_rx_bufsize(dev)"
 				"=%d)\n",
 				mp->name,
-				(int)mbp_priv->mbuf_data_room_size,
+				(int)mbp_buf_size,
 				(int)(RTE_PKTMBUF_HEADROOM +
 				      dev_info.min_rx_bufsize),
 				(int)RTE_PKTMBUF_HEADROOM,
@@ -938,8 +941,15 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
 		return (-EINVAL);
 	}
 
-	return (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
-					       socket_id, rx_conf, mp);
+	ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
+					      socket_id, rx_conf, mp);
+	if (!ret) {
+		if (!dev->data->min_rx_buf_size ||
+		    dev->data->min_rx_buf_size > mbp_buf_size)
+			dev->data->min_rx_buf_size = mbp_buf_size;
+	}
+
+	return ret;
 }
 
 int
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index a410afd..581259d 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1515,6 +1515,9 @@ struct rte_eth_dev_data {
 	struct rte_eth_conf dev_conf;   /**< Configuration applied to device. */
 	uint16_t max_frame_size;        /**< Default is ETHER_MAX_LEN (1518). */
 
+	uint32_t min_rx_buf_size;
+	/**< Common rx buffer size handled by all queues */
+
 	uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */
 	struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */
 	uint64_t mac_pool_sel[ETH_NUM_RECEIVE_MAC_ADDR];
-- 
1.7.10.4

[dpdk-dev] [PATCH v3 4/7] ethdev: introduce enable_scatter rx mode

[David Marchand]

We might want to be sure the scatter packets reception handler is selected in a
pmd. This makes it possible to then change mtu later, without the need of
restarting a port.
It is then the pmd duty to tell it enabled the scatter reception handler by
setting dev->data->scattered_rx to 1.

Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_ether/rte_ethdev.h     |    3 ++-
 lib/librte_pmd_e1000/em_rxtx.c    |    5 +++++
 lib/librte_pmd_e1000/igb_rxtx.c   |   10 ++++++++++
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c |   10 ++++++++++
 4 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 581259d..2b98700 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -307,7 +307,8 @@ struct rte_eth_rxmode {
 		hw_vlan_strip    : 1, /**< VLAN strip enable. */
 		hw_vlan_extend   : 1, /**< Extended VLAN enable. */
 		jumbo_frame      : 1, /**< Jumbo Frame Receipt enable. */
-		hw_strip_crc     : 1; /**< Enable CRC stripping by hardware. */
+		hw_strip_crc     : 1, /**< Enable CRC stripping by hardware. */
+		enable_scatter   : 1; /**< Enable scatter packets rx handler */
 };
 
 /**
diff --git a/lib/librte_pmd_e1000/em_rxtx.c b/lib/librte_pmd_e1000/em_rxtx.c
index 1575e79..e5f1933 100644
--- a/lib/librte_pmd_e1000/em_rxtx.c
+++ b/lib/librte_pmd_e1000/em_rxtx.c
@@ -1714,6 +1714,11 @@ eth_em_rx_init(struct rte_eth_dev *dev)
 		}
 	}
 
+	if (dev->data->dev_conf.rxmode.enable_scatter) {
+		dev->rx_pkt_burst = eth_em_recv_scattered_pkts;
+		dev->data->scattered_rx = 1;
+	}
+
 	/*
 	 * Setup the Checksum Register.
 	 * Receive Full-Packet Checksum Offload is mutually exclusive with RSS.
diff --git a/lib/librte_pmd_e1000/igb_rxtx.c b/lib/librte_pmd_e1000/igb_rxtx.c
index 9f0310d..aea898c 100644
--- a/lib/librte_pmd_e1000/igb_rxtx.c
+++ b/lib/librte_pmd_e1000/igb_rxtx.c
@@ -2008,6 +2008,11 @@ eth_igb_rx_init(struct rte_eth_dev *dev)
 		E1000_WRITE_REG(hw, E1000_RXDCTL(rxq->reg_idx), rxdctl);
 	}
 
+	if (dev->data->dev_conf.rxmode.enable_scatter) {
+		dev->rx_pkt_burst = eth_igb_recv_scattered_pkts;
+		dev->data->scattered_rx = 1;
+	}
+
 	/*
 	 * Setup BSIZE field of RCTL register, if needed.
 	 * Buffer sizes >= 1024 are not [supposed to be] setup in the RCTL
@@ -2277,6 +2282,11 @@ eth_igbvf_rx_init(struct rte_eth_dev *dev)
 		E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl);
 	}
 
+	if (dev->data->dev_conf.rxmode.enable_scatter) {
+		dev->rx_pkt_burst = eth_igb_recv_scattered_pkts;
+		dev->data->scattered_rx = 1;
+	}
+
 	/*
 	 * Setup the HW Rx Head and Tail Descriptor Pointers.
 	 * This needs to be done after enable.
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index ca72e75..f487859 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -3486,6 +3486,11 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
 		}
 	}
 
+	if (dev->data->dev_conf.rxmode.enable_scatter) {
+		dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+		dev->data->scattered_rx = 1;
+	}
+
 	/*
 	 * Device configured with multiple RX queues.
 	 */
@@ -3961,6 +3966,11 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
 		}
 	}
 
+	if (dev->data->dev_conf.rxmode.enable_scatter) {
+		dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+		dev->data->scattered_rx = 1;
+	}
+
 	return 0;
 }
 
-- 
1.7.10.4

[dpdk-dev] [PATCH v3 5/7] ethdev: add mtu accessors

[David Marchand]

From: Samuel Gauthier <samuel.gauthier@6wind.com>

This patch adds two new functions in ethdev api to retrieve current MTU and
change MTU of a port.
Only .mtu_set function is pmd specific.
pmd should update its max_rx_pkt_len if needed.

This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.

Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_ether/rte_ethdev.c       |   41 +++++++++++++++++++++++++--
 lib/librte_ether/rte_ethdev.h       |   34 +++++++++++++++++++++-
 lib/librte_ether/rte_ether.h        |    2 ++
 lib/librte_pmd_e1000/em_ethdev.c    |   42 +++++++++++++++++++++++++++
 lib/librte_pmd_e1000/igb_ethdev.c   |   53 +++++++++++++++++++++++++++++++++++
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   50 +++++++++++++++++++++++++++++++++
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |    2 +-
 7 files changed, 220 insertions(+), 4 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 9061c7d..7256841 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -201,9 +201,9 @@ rte_eth_dev_init(struct rte_pci_driver *pci_drv,
 	TAILQ_INIT(&(eth_dev->callbacks));
 
 	/*
-	 * Set the default maximum frame size.
+	 * Set the default MTU.
 	 */
-	eth_dev->data->max_frame_size = ETHER_MAX_LEN;
+	eth_dev->data->mtu = ETHER_MTU;
 
 	/* Invoke PMD device initialization function */
 	diag = (*eth_drv->eth_dev_init)(eth_drv, eth_dev);
@@ -1234,6 +1234,43 @@ rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr)
 	ether_addr_copy(&dev->data->mac_addrs[0], mac_addr);
 }
 
+
+int
+rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu)
+{
+	struct rte_eth_dev *dev;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return (-ENODEV);
+	}
+
+	dev = &rte_eth_devices[port_id];
+	*mtu = dev->data->mtu;
+	return 0;
+}
+
+int
+rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu)
+{
+	int ret;
+	struct rte_eth_dev *dev;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return (-ENODEV);
+	}
+
+	dev = &rte_eth_devices[port_id];
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->mtu_set, -ENOTSUP);
+
+	ret = (*dev->dev_ops->mtu_set)(dev, mtu);
+	if (!ret)
+		dev->data->mtu = mtu;
+
+	return ret;
+}
+
 int
 rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on)
 {
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 2b98700..2406e45 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1071,6 +1071,9 @@ typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev,
 typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
 /**< @Check DD bit of specific RX descriptor */
 
+typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
+/**< @internal Set MTU. */
+
 typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
 				  uint16_t vlan_id,
 				  int on);
@@ -1378,6 +1381,7 @@ struct eth_dev_ops {
 	eth_queue_stats_mapping_set_t queue_stats_mapping_set;
 	/**< Configure per queue stat counter mapping. */
 	eth_dev_infos_get_t        dev_infos_get; /**< Get device info. */
+	mtu_set_t                  mtu_set; /**< Set MTU. */
 	vlan_filter_set_t          vlan_filter_set;  /**< Filter VLAN Setup. */
 	vlan_tpid_set_t            vlan_tpid_set;      /**< Outer VLAN TPID Setup. */
 	vlan_strip_queue_set_t     vlan_strip_queue_set; /**< VLAN Stripping on queue. */
@@ -1514,7 +1518,7 @@ struct rte_eth_dev_data {
 	/**< Link-level information & status */
 
 	struct rte_eth_conf dev_conf;   /**< Configuration applied to device. */
-	uint16_t max_frame_size;        /**< Default is ETHER_MAX_LEN (1518). */
+	uint16_t mtu;                   /**< Maximum Transmission Unit. */
 
 	uint32_t min_rx_buf_size;
 	/**< Common rx buffer size handled by all queues */
@@ -2061,6 +2065,34 @@ extern void rte_eth_dev_info_get(uint8_t port_id,
 				 struct rte_eth_dev_info *dev_info);
 
 /**
+ * Retrieve the MTU of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mtu
+ *   A pointer to a uint16_t where the retrieved MTU is to be stored.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port_id* invalid.
+ */
+extern int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
+
+/**
+ * Change the MTU of an Ethernet device.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param mtu
+ *   A uint16_t for the MTU to be applied.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if operation is not supported.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if *mtu* invalid.
+ */
+extern int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
+
+/**
  * Enable/Disable hardware filtering by an Ethernet device of received
  * VLAN packets tagged with a given VLAN Tag Identifier.
  *
diff --git a/lib/librte_ether/rte_ether.h b/lib/librte_ether/rte_ether.h
index a25ca10..cd0c7c4 100644
--- a/lib/librte_ether/rte_ether.h
+++ b/lib/librte_ether/rte_ether.h
@@ -67,6 +67,8 @@ extern "C" {
 
 #define ETHER_MAX_VLAN_ID  4095 /**< Maximum VLAN ID. */
 
+#define ETHER_MIN_MTU 68 /**< Minimum MTU for IPv4 packets, see RFC 791. */
+
 /**
  * Ethernet address:
  * A universally administered address is uniquely assigned to a device by its
diff --git a/lib/librte_pmd_e1000/em_ethdev.c b/lib/librte_pmd_e1000/em_ethdev.c
index 7913ff0..8b2a340 100644
--- a/lib/librte_pmd_e1000/em_ethdev.c
+++ b/lib/librte_pmd_e1000/em_ethdev.c
@@ -94,6 +94,8 @@ static void em_hw_control_release(struct e1000_hw *hw);
 static void em_init_manageability(struct e1000_hw *hw);
 static void em_release_manageability(struct e1000_hw *hw);
 
+static int eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
+
 static int eth_em_vlan_filter_set(struct rte_eth_dev *dev,
 		uint16_t vlan_id, int on);
 static void eth_em_vlan_offload_set(struct rte_eth_dev *dev, int mask);
@@ -145,6 +147,7 @@ static struct eth_dev_ops eth_em_ops = {
 	.stats_get            = eth_em_stats_get,
 	.stats_reset          = eth_em_stats_reset,
 	.dev_infos_get        = eth_em_infos_get,
+	.mtu_set              = eth_em_mtu_set,
 	.vlan_filter_set      = eth_em_vlan_filter_set,
 	.vlan_offload_set     = eth_em_vlan_offload_set,
 	.rx_queue_setup       = eth_em_rx_queue_setup,
@@ -1487,6 +1490,45 @@ eth_em_rar_clear(struct rte_eth_dev *dev, uint32_t index)
 	e1000_rar_set(hw, addr, index);
 }
 
+static int
+eth_em_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	struct rte_eth_dev_info dev_info;
+	struct e1000_hw *hw;
+	uint32_t frame_size;
+	uint32_t rctl;
+
+	eth_em_infos_get(dev, &dev_info);
+	frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + VLAN_TAG_SIZE;
+
+	/* check that mtu is within the allowed range */
+	if ((mtu < ETHER_MIN_MTU) || (frame_size > dev_info.max_rx_pktlen))
+		return -EINVAL;
+
+	/* refuse mtu that requires the support of scattered packets when this
+	 * feature has not been enabled before. */
+	if (!dev->data->scattered_rx &&
+	    frame_size > dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)
+		return -EINVAL;
+
+	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	rctl = E1000_READ_REG(hw, E1000_RCTL);
+
+	/* switch to jumbo mode if needed */
+	if (frame_size > ETHER_MAX_LEN) {
+		dev->data->dev_conf.rxmode.jumbo_frame = 1;
+		rctl |= E1000_RCTL_LPE;
+	} else {
+		dev->data->dev_conf.rxmode.jumbo_frame = 0;
+		rctl &= ~E1000_RCTL_LPE;
+	}
+	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+
+	/* update max frame size */
+	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+	return 0;
+}
+
 struct rte_driver em_pmd_drv = {
 	.type = PMD_PDEV,
 	.init = rte_em_pmd_init,
diff --git a/lib/librte_pmd_e1000/igb_ethdev.c b/lib/librte_pmd_e1000/igb_ethdev.c
index c92b737..e633a5d 100644
--- a/lib/librte_pmd_e1000/igb_ethdev.c
+++ b/lib/librte_pmd_e1000/igb_ethdev.c
@@ -87,6 +87,8 @@ static void igb_hw_control_release(struct e1000_hw *hw);
 static void igb_init_manageability(struct e1000_hw *hw);
 static void igb_release_manageability(struct e1000_hw *hw);
 
+static int  eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
+
 static int eth_igb_vlan_filter_set(struct rte_eth_dev *dev,
 		uint16_t vlan_id, int on);
 static void eth_igb_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid_id);
@@ -218,6 +220,7 @@ static struct eth_dev_ops eth_igb_ops = {
 	.stats_get            = eth_igb_stats_get,
 	.stats_reset          = eth_igb_stats_reset,
 	.dev_infos_get        = eth_igb_infos_get,
+	.mtu_set              = eth_igb_mtu_set,
 	.vlan_filter_set      = eth_igb_vlan_filter_set,
 	.vlan_tpid_set        = eth_igb_vlan_tpid_set,
 	.vlan_offload_set     = eth_igb_vlan_offload_set,
@@ -3005,6 +3008,56 @@ eth_igb_get_5tuple_filter(struct rte_eth_dev *dev, uint16_t index,
 	return -ENOENT;
 }
 
+static int
+eth_igb_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	uint32_t rctl;
+	struct e1000_hw *hw;
+	struct rte_eth_dev_info dev_info;
+	uint32_t frame_size = mtu + (ETHER_HDR_LEN + ETHER_CRC_LEN +
+				     VLAN_TAG_SIZE);
+
+	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+#ifdef RTE_LIBRTE_82571_SUPPORT
+	/* XXX: not bigger than max_rx_pktlen */
+	if (hw->mac.type == e1000_82571)
+		return -ENOTSUP;
+#endif
+	eth_igb_infos_get(dev, &dev_info);
+
+	/* check that mtu is within the allowed range */
+	if ((mtu < ETHER_MIN_MTU) ||
+	    (frame_size > dev_info.max_rx_pktlen))
+		return -EINVAL;
+
+	/* refuse mtu that requires the support of scattered packets when this
+	 * feature has not been enabled before. */
+	if (!dev->data->scattered_rx &&
+	    frame_size > dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM)
+		return -EINVAL;
+
+	rctl = E1000_READ_REG(hw, E1000_RCTL);
+
+	/* switch to jumbo mode if needed */
+	if (frame_size > ETHER_MAX_LEN) {
+		dev->data->dev_conf.rxmode.jumbo_frame = 1;
+		rctl |= E1000_RCTL_LPE;
+	} else {
+		dev->data->dev_conf.rxmode.jumbo_frame = 0;
+		rctl &= ~E1000_RCTL_LPE;
+	}
+	E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+
+	/* update max frame size */
+	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+
+	E1000_WRITE_REG(hw, E1000_RLPML,
+			dev->data->dev_conf.rxmode.max_rx_pkt_len);
+
+	return 0;
+}
+
 static struct rte_driver pmd_igb_drv = {
 	.type = PMD_PDEV,
 	.init = rte_igb_pmd_init,
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 559d246..fca8fd7 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -119,6 +119,9 @@ static int ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
 					     uint8_t is_rx);
 static void ixgbe_dev_info_get(struct rte_eth_dev *dev,
 				struct rte_eth_dev_info *dev_info);
+
+static int ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
+
 static int ixgbe_vlan_filter_set(struct rte_eth_dev *dev,
 		uint16_t vlan_id, int on);
 static void ixgbe_vlan_tpid_set(struct rte_eth_dev *dev, uint16_t tpid_id);
@@ -293,6 +296,7 @@ static struct eth_dev_ops ixgbe_eth_dev_ops = {
 	.stats_reset          = ixgbe_dev_stats_reset,
 	.queue_stats_mapping_set = ixgbe_dev_queue_stats_mapping_set,
 	.dev_infos_get        = ixgbe_dev_info_get,
+	.mtu_set              = ixgbe_dev_mtu_set,
 	.vlan_filter_set      = ixgbe_vlan_filter_set,
 	.vlan_tpid_set        = ixgbe_vlan_tpid_set,
 	.vlan_offload_set     = ixgbe_vlan_offload_set,
@@ -2706,6 +2710,52 @@ ixgbe_remove_rar(struct rte_eth_dev *dev, uint32_t index)
 	ixgbe_clear_rar(hw, index);
 }
 
+static int
+ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	uint32_t hlreg0;
+	uint32_t maxfrs;
+	struct ixgbe_hw *hw;
+	struct rte_eth_dev_info dev_info;
+	uint32_t frame_size = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+
+	ixgbe_dev_info_get(dev, &dev_info);
+
+	/* check that mtu is within the allowed range */
+	if ((mtu < ETHER_MIN_MTU) || (frame_size > dev_info.max_rx_pktlen))
+		return -EINVAL;
+
+	/* refuse mtu that requires the support of scattered packets when this
+	 * feature has not been enabled before. */
+	if (!dev->data->scattered_rx &&
+	    (frame_size + 2 * IXGBE_VLAN_TAG_SIZE >
+	     dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM))
+		return -EINVAL;
+
+	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+
+	/* switch to jumbo mode if needed */
+	if (frame_size > ETHER_MAX_LEN) {
+		dev->data->dev_conf.rxmode.jumbo_frame = 1;
+		hlreg0 |= IXGBE_HLREG0_JUMBOEN;
+	} else {
+		dev->data->dev_conf.rxmode.jumbo_frame = 0;
+		hlreg0 &= ~IXGBE_HLREG0_JUMBOEN;
+	}
+	IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+
+	/* update max frame size */
+	dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
+
+	maxfrs = IXGBE_READ_REG(hw, IXGBE_MAXFRS);
+	maxfrs &= 0x0000FFFF;
+	maxfrs |= (dev->data->dev_conf.rxmode.max_rx_pkt_len << 16);
+	IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, maxfrs);
+
+	return 0;
+}
+
 /*
  * Virtual Function operations
  */
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index f487859..9b640e5 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -2886,7 +2886,7 @@ ixgbe_dcb_hw_configure(struct rte_eth_dev *dev,
 	uint16_t max[IXGBE_DCB_MAX_TRAFFIC_CLASS] = {0};
 	uint8_t map[IXGBE_DCB_MAX_TRAFFIC_CLASS] = {0};
 	struct ixgbe_dcb_tc_config *tc;
-	uint32_t max_frame = dev->data->max_frame_size;
+	uint32_t max_frame = dev->data->mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
 	struct ixgbe_hw *hw =
 			IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
-- 
1.7.10.4

[dpdk-dev] [PATCH v3 6/7] ixgbe: add set_mtu to ixgbevf

[David Marchand]

From: Ivan Boule <ivan.boule@6wind.com>

The support of jumbo frames in the ixgbevf Poll Mode Driver of 10GbE
82599 VF functions consists in the following enhancements:

- Implement the mtu_set function in the ixgbevf PMD, using the IXGBE_VF_SET_LPE
  request of the version 1.0 of the VF/PF mailbox API for this purpose.

- Add a detailed explanation on the VF/PF rx max frame len negotiation.

Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |   37 +++++++++++++++++++++++++++++++++++
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |   15 +++++++++++++-
 2 files changed, 51 insertions(+), 1 deletion(-)

diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index fca8fd7..85c4a77 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -220,6 +220,8 @@ static int ixgbe_remove_5tuple_filter(struct rte_eth_dev *dev,
 static int ixgbe_get_5tuple_filter(struct rte_eth_dev *dev, uint16_t index,
 			struct rte_5tuple_filter *filter, uint16_t *rx_queue);
 
+static int ixgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu);
+
 /*
  * Define VF Stats MACRO for Non "cleared on read" register
  */
@@ -376,6 +378,7 @@ static struct eth_dev_ops ixgbevf_eth_dev_ops = {
 	.stats_reset          = ixgbevf_dev_stats_reset,
 	.dev_close            = ixgbevf_dev_close,
 	.dev_infos_get        = ixgbe_dev_info_get,
+	.mtu_set              = ixgbevf_dev_set_mtu,
 	.vlan_filter_set      = ixgbevf_vlan_filter_set,
 	.vlan_strip_queue_set = ixgbevf_vlan_strip_queue_set,
 	.vlan_offload_set     = ixgbevf_vlan_offload_set,
@@ -3937,6 +3940,40 @@ ixgbe_get_5tuple_filter(struct rte_eth_dev *dev, uint16_t index,
 	return -ENOENT;
 }
 
+static int
+ixgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	struct ixgbe_hw *hw;
+	uint32_t max_frame = mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+
+	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+
+	if ((mtu < ETHER_MIN_MTU) || (max_frame > ETHER_MAX_JUMBO_FRAME_LEN))
+		return -EINVAL;
+
+	/* refuse mtu that requires the support of scattered packets when this
+	 * feature has not been enabled before. */
+	if (!dev->data->scattered_rx &&
+	    (max_frame + 2 * IXGBE_VLAN_TAG_SIZE >
+	     dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM))
+		return -EINVAL;
+
+	/*
+	 * When supported by the underlying PF driver, use the IXGBE_VF_SET_MTU
+	 * request of the version 2.0 of the mailbox API.
+	 * For now, use the IXGBE_VF_SET_LPE request of the version 1.0
+	 * of the mailbox API.
+	 * This call to IXGBE_SET_LPE action won't work with ixgbe pf drivers
+	 * prior to 3.11.33 which contains the following change:
+	 * "ixgbe: Enable jumbo frames support w/ SR-IOV"
+	 */
+	ixgbevf_rlpml_set_vf(hw, max_frame);
+
+	/* update max frame size */
+	dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame;
+	return 0;
+}
+
 static struct rte_driver rte_ixgbe_driver = {
 	.type = PMD_PDEV,
 	.init = rte_ixgbe_pmd_init,
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index 9b640e5..7f05b26 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -3883,7 +3883,20 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
 	PMD_INIT_FUNC_TRACE();
 	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 
-	/* setup MTU */
+	/*
+	 * When the VF driver issues a IXGBE_VF_RESET request, the PF driver
+	 * disables the VF receipt of packets if the PF MTU is > 1500.
+	 * This is done to deal with 82599 limitations that imposes
+	 * the PF and all VFs to share the same MTU.
+	 * Then, the PF driver enables again the VF receipt of packet when
+	 * the VF driver issues a IXGBE_VF_SET_LPE request.
+	 * In the meantime, the VF device cannot be used, even if the VF driver
+	 * and the Guest VM network stack are ready to accept packets with a
+	 * size up to the PF MTU.
+	 * As a work-around to this PF behaviour, force the call to
+	 * ixgbevf_rlpml_set_vf even if jumbo frames are not used. This way,
+	 * VF packets received can work in all cases.
+	 */
 	ixgbevf_rlpml_set_vf(hw,
 		(uint16_t)dev->data->dev_conf.rxmode.max_rx_pkt_len);
 
-- 
1.7.10.4

[dpdk-dev] [PATCH v3 7/7] app/testpmd: allow to configure mtu

[David Marchand]

From: Ivan Boule <ivan.boule@6wind.com>

Take avantage of the .set_mtu ethdev function and make it possible to configure
MTU on devices using testpmd.

Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 app/test-pmd/cmdline.c |   54 ++++++++++++++++++++++++++++++++++++++++++++++++
 app/test-pmd/config.c  |   13 ++++++++++++
 app/test-pmd/testpmd.h |    2 +-
 3 files changed, 68 insertions(+), 1 deletion(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index f64f2df..e3e51fc 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -527,6 +527,8 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"port config all (txfreet|txrst|rxfreet) (value)\n"
 			"    Set free threshold for rx/tx, or set"
 			" tx rs bit threshold.\n\n"
+			"port config mtu X value\n"
+			"    Set the MTU of port X to a given value\n\n"
 		);
 	}
 
@@ -1086,6 +1088,57 @@ cmdline_parse_inst_t cmd_config_max_pkt_len = {
 	},
 };
 
+/* *** configure port MTU *** */
+struct cmd_config_mtu_result {
+	cmdline_fixed_string_t port;
+	cmdline_fixed_string_t keyword;
+	cmdline_fixed_string_t mtu;
+	uint8_t port_id;
+	uint16_t value;
+};
+
+static void
+cmd_config_mtu_parsed(void *parsed_result,
+		      __attribute__((unused)) struct cmdline *cl,
+		      __attribute__((unused)) void *data)
+{
+	struct cmd_config_mtu_result *res = parsed_result;
+
+	if (res->value < ETHER_MIN_LEN) {
+		printf("mtu cannot be less than %d\n", ETHER_MIN_LEN);
+		return;
+	}
+	port_mtu_set(res->port_id, res->value);
+}
+
+cmdline_parse_token_string_t cmd_config_mtu_port =
+	TOKEN_STRING_INITIALIZER(struct cmd_config_mtu_result, port,
+				 "port");
+cmdline_parse_token_string_t cmd_config_mtu_keyword =
+	TOKEN_STRING_INITIALIZER(struct cmd_config_mtu_result, keyword,
+				 "config");
+cmdline_parse_token_string_t cmd_config_mtu_mtu =
+	TOKEN_STRING_INITIALIZER(struct cmd_config_mtu_result, keyword,
+				 "mtu");
+cmdline_parse_token_num_t cmd_config_mtu_port_id =
+	TOKEN_NUM_INITIALIZER(struct cmd_config_mtu_result, port_id, UINT8);
+cmdline_parse_token_num_t cmd_config_mtu_value =
+	TOKEN_NUM_INITIALIZER(struct cmd_config_mtu_result, value, UINT16);
+
+cmdline_parse_inst_t cmd_config_mtu = {
+	.f = cmd_config_mtu_parsed,
+	.data = NULL,
+	.help_str = "port config mtu value",
+	.tokens = {
+		(void *)&cmd_config_mtu_port,
+		(void *)&cmd_config_mtu_keyword,
+		(void *)&cmd_config_mtu_mtu,
+		(void *)&cmd_config_mtu_port_id,
+		(void *)&cmd_config_mtu_value,
+		NULL,
+	},
+};
+
 /* *** configure rx mode *** */
 struct cmd_config_rx_mode_flag {
 	cmdline_fixed_string_t port;
@@ -6553,6 +6606,7 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_config_speed_all,
 	(cmdline_parse_inst_t *)&cmd_config_speed_specific,
 	(cmdline_parse_inst_t *)&cmd_config_rx_tx,
+	(cmdline_parse_inst_t *)&cmd_config_mtu,
 	(cmdline_parse_inst_t *)&cmd_config_max_pkt_len,
 	(cmdline_parse_inst_t *)&cmd_config_rx_mode_flag,
 	(cmdline_parse_inst_t *)&cmd_config_rss,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index b654eb8..0023ab2 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -503,6 +503,19 @@ port_reg_set(portid_t port_id, uint32_t reg_off, uint32_t reg_v)
 	display_port_reg_value(port_id, reg_off, reg_v);
 }
 
+void
+port_mtu_set(portid_t port_id, uint16_t mtu)
+{
+	int diag;
+
+	if (port_id_is_invalid(port_id))
+		return;
+	diag = rte_eth_dev_set_mtu(port_id, mtu);
+	if (diag == 0)
+		return;
+	printf("Set MTU failed. diag=%d\n", diag);
+}
+
 /*
  * RX/TX ring descriptors display functions.
  */
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index aa1942b..5839f93 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -454,7 +454,7 @@ void fwd_config_setup(void);
 void set_def_fwd_config(void);
 int init_fwd_streams(void);
 
-
+void port_mtu_set(portid_t port_id, uint16_t mtu);
 void port_reg_bit_display(portid_t port_id, uint32_t reg_off, uint8_t bit_pos);
 void port_reg_bit_set(portid_t port_id, uint32_t reg_off, uint8_t bit_pos,
 		      uint8_t bit_v);
-- 
1.7.10.4

Re: [dpdk-dev] [PATCH v3 0/7] add mtu and flow control handlers

[Ananyev, Konstantin]

 
> This patchset introduces 3 new ethdev operations: flow control parameters
> retrieval and mtu get/set operations.
> 
> Changes since v1:
> - compute min rx buffer size at ethdev level (to simplify pmd mtu checks)
> - introduce enable_scatter rx mode so that we can advise pmd to configure
>   scatter mode
> - rework mtu get/set operations (based on Konstantin comments)
> - pass checkpatch.pl checks
> 
> Changes since v2:
> - rebase on top of master
> - fix min_rx_buf_size computation (patch 3)
> - fix frame size checks for ixgbe so that vlan and double vlan frames can be
>   received (patch 5 and 6)
> - add a new ETHER_MIN_MTU macro in rte_ether.h (patch 5 and 6)
> 
> 
> --
> David Marchand
> 
> David Marchand (3):
>   ethdev: add autoneg parameter in flow ctrl accessors
>   ethdev: store min rx buffer size
>   ethdev: introduce enable_scatter rx mode
> 
> Ivan Boule (2):
>   ixgbe: add set_mtu to ixgbevf
>   app/testpmd: allow to configure mtu
> 
> Samuel Gauthier (1):
>   ethdev: add mtu accessors
> 
> Zijie Pan (1):
>   ethdev: retrieve flow control configuration
> 
>  app/test-pmd/cmdline.c              |   54 +++++++++++++
>  app/test-pmd/config.c               |   13 ++++
>  app/test-pmd/testpmd.h              |    2 +-
>  lib/librte_ether/rte_ethdev.c       |   77 +++++++++++++++++--
>  lib/librte_ether/rte_ethdev.h       |   65 +++++++++++++++-
>  lib/librte_ether/rte_ether.h        |    2 +
>  lib/librte_pmd_e1000/em_ethdev.c    |   89 +++++++++++++++++++++
>  lib/librte_pmd_e1000/em_rxtx.c      |    5 ++
>  lib/librte_pmd_e1000/igb_ethdev.c   |  100 ++++++++++++++++++++++++
>  lib/librte_pmd_e1000/igb_rxtx.c     |   10 +++
>  lib/librte_pmd_ixgbe/ixgbe_ethdev.c |  145 ++++++++++++++++++++++++++++++++++-
>  lib/librte_pmd_ixgbe/ixgbe_rxtx.c   |   27 ++++++-
>  12 files changed, 573 insertions(+), 16 deletions(-)
> 
> --

Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

Re: [dpdk-dev] [PATCH v3 0/7] add mtu and flow control handlers

[Thomas Monjalon]

2014-06-17 22:30, Ananyev, Konstantin:
> > This patchset introduces 3 new ethdev operations: flow control parameters
> > retrieval and mtu get/set operations.
> > 
> > David Marchand (3):
> >   ethdev: add autoneg parameter in flow ctrl accessors
> >   ethdev: store min rx buffer size
> >   ethdev: introduce enable_scatter rx mode
> > 
> > Ivan Boule (2):
> >   ixgbe: add set_mtu to ixgbevf
> >   app/testpmd: allow to configure mtu
> > 
> > Samuel Gauthier (1):
> >   ethdev: add mtu accessors
> > 
> > Zijie Pan (1):
> >   ethdev: retrieve flow control configuration
> 
> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

Applied for version 1.7.0.

Thanks
-- 
Thomas

Re: [dpdk-dev] [PATCH v3 2/7] ethdev: add autoneg parameter in flow ctrl accessors

[Liu, Jijiang]

Hi David,

There was an error when we used the following test command to test latest master branch for 10G NIC flow control 
test command: 
./x86_64-native-linuxapp-gcc/app/testpmd -c f -n 4-- -i --burst=1 --txpt=32 --txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=f 
testpmd> set flow_ctrl rx off tx off 300 50 10 1 mac_ctrl_frame_fwd on 0 
bad flow contrl parameter, return code = -95  

And the reason is that autoneg check failed in ixgbe_flow_ctrl_set() function. 
	if (fc_conf->autoneg != !hw->fc.disable_fc_autoneg)
		return -ENOTSUP;  

Thanks
Jijiang Liu

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of David Marchand
Sent: Wednesday, June 18, 2014 2:09 AM
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 2/7] ethdev: add autoneg parameter in flow ctrl accessors

Add autoneg field in flow control parameters.
This makes it easier to understand why changing some parameters does not always have the expected result.

Changing autoneg is not supported at the moment.

Signed-off-by: David Marchand <david.marchand@6wind.com>
---
 lib/librte_ether/rte_ethdev.h       |    1 +
 lib/librte_pmd_e1000/em_ethdev.c    |    3 +++
 lib/librte_pmd_e1000/igb_ethdev.c   |    3 +++
 lib/librte_pmd_ixgbe/ixgbe_ethdev.c |    3 +++
 4 files changed, 10 insertions(+)

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index 1e0564d..a410afd 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -649,6 +649,7 @@ struct rte_eth_fc_conf {
 	uint16_t send_xon;    /**< Is XON frame need be sent */
 	enum rte_eth_fc_mode mode;  /**< Link flow control mode */
 	uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
+	uint8_t autoneg;      /**< Use Pause autoneg */
 };
 
 /**
diff --git a/lib/librte_pmd_e1000/em_ethdev.c b/lib/librte_pmd_e1000/em_ethdev.c
index 58efcdf..7913ff0 100644
--- a/lib/librte_pmd_e1000/em_ethdev.c
+++ b/lib/librte_pmd_e1000/em_ethdev.c
@@ -1378,6 +1378,7 @@ eth_em_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water;
 	fc_conf->low_water = hw->fc.low_water;
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = hw->mac.autoneg;
 
 	/*
 	 * Return rx_pause and tx_pause status according to actual setting of @@ -1422,6 +1423,8 @@ eth_em_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	uint32_t rctl;
 
 	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != hw->mac.autoneg)
+		return -ENOTSUP;
 	rx_buf_size = em_get_rx_buffer_size(hw);
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
diff --git a/lib/librte_pmd_e1000/igb_ethdev.c b/lib/librte_pmd_e1000/igb_ethdev.c
index 92ac4a8..c92b737 100644
--- a/lib/librte_pmd_e1000/igb_ethdev.c
+++ b/lib/librte_pmd_e1000/igb_ethdev.c
@@ -1871,6 +1871,7 @@ eth_igb_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water;
 	fc_conf->low_water = hw->fc.low_water;
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = hw->mac.autoneg;
 
 	/*
 	 * Return rx_pause and tx_pause status according to actual setting of @@ -1915,6 +1916,8 @@ eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	uint32_t rctl;
 
 	hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != hw->mac.autoneg)
+		return -ENOTSUP;
 	rx_buf_size = igb_get_rx_buffer_size(hw);
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index f130080..559d246 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -2309,6 +2309,7 @@ ixgbe_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	fc_conf->high_water = hw->fc.high_water[0];
 	fc_conf->low_water = hw->fc.low_water[0];
 	fc_conf->send_xon = hw->fc.send_xon;
+	fc_conf->autoneg = !hw->fc.disable_fc_autoneg;
 
 	/*
 	 * Return rx_pause status according to actual setting of @@ -2360,6 +2361,8 @@ ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 	PMD_INIT_FUNC_TRACE();
 
 	hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	if (fc_conf->autoneg != !hw->fc.disable_fc_autoneg)
+		return -ENOTSUP;
 	rx_buf_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0));
 	PMD_INIT_LOG(DEBUG, "Rx packet buffer size = 0x%x \n", rx_buf_size);
 
--
1.7.10.4

Re: [dpdk-dev] [PATCH v3 2/7] ethdev: add autoneg parameter in flow ctrl accessors

[David Marchand]

Hello,

On 06/23/2014 05:35 AM, Liu, Jijiang wrote:
> There was an error when we used the following test command to test latest master branch for 10G NIC flow control
> test command:
> ./x86_64-native-linuxapp-gcc/app/testpmd -c f -n 4-- -i --burst=1 --txpt=32 --txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=f
> testpmd> set flow_ctrl rx off tx off 300 50 10 1 mac_ctrl_frame_fwd on 0
> bad flow contrl parameter, return code = -95
>
> And the reason is that autoneg check failed in ixgbe_flow_ctrl_set() function.
> 	if (fc_conf->autoneg != !hw->fc.disable_fc_autoneg)
> 		return -ENOTSUP;

Ok, indeed, there is a problem with the autoneg field I added.
I will try to send a fix, but I am a bit short on time (and I will be 
offline for a week starting thursday), so if you have a fix before me, 
feel free to send it.


-- 
David Marchand