DPDK patches and discussions
 help / color / mirror / Atom feed
From: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
To: shahafs@mellanox.com, yskoh@mellanox.com
Cc: dev@dpdk.org, Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Subject: [dpdk-dev] [PATCH v2 5/7] net/mlx5: e-switch VXLAN tunnel devices management
Date: Mon, 15 Oct 2018 14:13:33 +0000	[thread overview]
Message-ID: <1539612815-47199-6-git-send-email-viacheslavo@mellanox.com> (raw)
In-Reply-To: <1539612815-47199-1-git-send-email-viacheslavo@mellanox.com>

VXLAN interfaces are dynamically created for each local UDP port
of outer networks and then used as targets for TC "flower" filters
in order to perform encapsulation. These VXLAN interfaces are
system-wide, the only one device with given UDP port can exist
in the system (the attempt of creating another device with the
same UDP local port returns EEXIST), so PMD should support the
shared device instances database for PMD instances. These VXLAN
implicitly created devices are called VTEPs (Virtual Tunnel
End Points).

Creation of the VTEP occurs at the moment of rule applying. The
link is set up, root ingress qdisc is also initialized.

Encapsulation VTEPs are created on per port basis, the single
VTEP is attached to the outer interface and is shared for all
encapsulation rules on this interface. The source UDP port is
automatically selected in range 30000-60000.

For decapsulaton one VTEP is created per every unique UDP
local port to accept tunnel traffic. The name of created
VTEP consists of prefix "vmlx_" and the number of UDP port in
decimal digits without leading zeros (vmlx_4789). The VTEP
can be preliminary created in the system before the launching
application, it allows to share	UDP ports between primary
and secondary processes.

Suggested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow_tcf.c | 503 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 499 insertions(+), 4 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow_tcf.c b/drivers/net/mlx5/mlx5_flow_tcf.c
index d6840d5..efa9c3b 100644
--- a/drivers/net/mlx5/mlx5_flow_tcf.c
+++ b/drivers/net/mlx5/mlx5_flow_tcf.c
@@ -3443,6 +3443,432 @@ struct pedit_parser {
 	return -err;
 }
 
+/* VTEP device list is shared between PMD port instances. */
+static LIST_HEAD(, mlx5_flow_tcf_vtep)
+			vtep_list_vxlan = LIST_HEAD_INITIALIZER();
+static pthread_mutex_t vtep_list_mutex = PTHREAD_MUTEX_INITIALIZER;
+
+/**
+ * Deletes VTEP network device.
+ *
+ * @param[in] tcf
+ *   Context object initialized by mlx5_flow_tcf_context_create().
+ * @param[in] vtep
+ *   Object represinting the network device to delete. Memory
+ *   allocated for this object is freed by routine.
+ */
+static void
+flow_tcf_delete_iface(struct mlx5_flow_tcf_context *tcf,
+		      struct mlx5_flow_tcf_vtep *vtep)
+{
+	struct nlmsghdr *nlh;
+	struct ifinfomsg *ifm;
+	alignas(struct nlmsghdr)
+	uint8_t buf[mnl_nlmsg_size(MNL_ALIGN(sizeof(*ifm))) + 8];
+	int ret;
+
+	assert(!vtep->refcnt);
+	if (vtep->created && vtep->ifindex) {
+		DRV_LOG(INFO, "VTEP delete (%d)", vtep->ifindex);
+		nlh = mnl_nlmsg_put_header(buf);
+		nlh->nlmsg_type = RTM_DELLINK;
+		nlh->nlmsg_flags = NLM_F_REQUEST;
+		ifm = mnl_nlmsg_put_extra_header(nlh, sizeof(*ifm));
+		ifm->ifi_family = AF_UNSPEC;
+		ifm->ifi_index = vtep->ifindex;
+		ret = flow_tcf_nl_ack(tcf, nlh, 0, NULL, NULL);
+		if (ret)
+			DRV_LOG(WARNING, "netlink: error deleting VXLAN "
+					 "encap/decap ifindex %u",
+					 ifm->ifi_index);
+	}
+	rte_free(vtep);
+}
+
+/**
+ * Creates VTEP network device.
+ *
+ * @param[in] tcf
+ *   Context object initialized by mlx5_flow_tcf_context_create().
+ * @param[in] ifouter
+ *   Outer interface to attach new-created VXLAN device
+ *   If zero the VXLAN device will not be attached to any device.
+ * @param[in] port
+ *   UDP port of created VTEP device.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL.
+ *
+ * @return
+ * Pointer to created device structure on success, NULL otherwise
+ * and rte_errno is set.
+ */
+#ifndef HAVE_IFLA_VXLAN_COLLECT_METADATA
+static struct mlx5_flow_tcf_vtep*
+flow_tcf_create_iface(struct mlx5_flow_tcf_context *tcf __rte_unused,
+		      unsigned int ifouter __rte_unused,
+		      uint16_t port __rte_unused,
+		      struct rte_flow_error *error)
+{
+	rte_flow_error_set(error, ENOTSUP,
+			 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+			 "netlink: failed to create VTEP, "
+			 "VXLAN metadat is not supported by kernel");
+	return NULL;
+}
+#else
+static struct mlx5_flow_tcf_vtep*
+flow_tcf_create_iface(struct mlx5_flow_tcf_context *tcf,
+		      unsigned int ifouter,
+		      uint16_t port, struct rte_flow_error *error)
+{
+	struct mlx5_flow_tcf_vtep *vtep;
+	struct nlmsghdr *nlh;
+	struct ifinfomsg *ifm;
+	char name[sizeof(MLX5_VXLAN_DEVICE_PFX) + 24];
+	alignas(struct nlmsghdr)
+	uint8_t buf[mnl_nlmsg_size(sizeof(*ifm)) + 128 +
+		       SZ_NLATTR_DATA_OF(sizeof(name)) +
+		       SZ_NLATTR_NEST * 2 +
+		       SZ_NLATTR_STRZ_OF("vxlan") +
+		       SZ_NLATTR_DATA_OF(sizeof(uint32_t)) +
+		       SZ_NLATTR_DATA_OF(sizeof(uint32_t)) +
+		       SZ_NLATTR_DATA_OF(sizeof(uint16_t)) +
+		       SZ_NLATTR_DATA_OF(sizeof(uint8_t))];
+	struct nlattr *na_info;
+	struct nlattr *na_vxlan;
+	rte_be16_t vxlan_port = RTE_BE16(port);
+	int ret;
+
+	vtep = rte_zmalloc(__func__, sizeof(*vtep),
+			alignof(struct mlx5_flow_tcf_vtep));
+	if (!vtep) {
+		rte_flow_error_set
+			(error, ENOMEM, RTE_FLOW_ERROR_TYPE_UNSPECIFIED,
+			 NULL, "unadble to allocate memory for VTEP desc");
+		return NULL;
+	}
+	*vtep = (struct mlx5_flow_tcf_vtep){
+			.refcnt = 0,
+			.port = port,
+			.created = 0,
+			.ifouter = 0,
+			.ifindex = 0,
+			.local = LIST_HEAD_INITIALIZER(),
+			.neigh = LIST_HEAD_INITIALIZER(),
+	};
+	memset(buf, 0, sizeof(buf));
+	nlh = mnl_nlmsg_put_header(buf);
+	nlh->nlmsg_type = RTM_NEWLINK;
+	nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE  | NLM_F_EXCL;
+	ifm = mnl_nlmsg_put_extra_header(nlh, sizeof(*ifm));
+	ifm->ifi_family = AF_UNSPEC;
+	ifm->ifi_type = 0;
+	ifm->ifi_index = 0;
+	ifm->ifi_flags = IFF_UP;
+	ifm->ifi_change = 0xffffffff;
+	snprintf(name, sizeof(name), "%s%u", MLX5_VXLAN_DEVICE_PFX, port);
+	mnl_attr_put_strz(nlh, IFLA_IFNAME, name);
+	na_info = mnl_attr_nest_start(nlh, IFLA_LINKINFO);
+	assert(na_info);
+	mnl_attr_put_strz(nlh, IFLA_INFO_KIND, "vxlan");
+	na_vxlan = mnl_attr_nest_start(nlh, IFLA_INFO_DATA);
+	if (ifouter)
+		mnl_attr_put_u32(nlh, IFLA_VXLAN_LINK, ifouter);
+	assert(na_vxlan);
+	mnl_attr_put_u8(nlh, IFLA_VXLAN_COLLECT_METADATA, 1);
+	mnl_attr_put_u8(nlh, IFLA_VXLAN_UDP_ZERO_CSUM6_RX, 1);
+	mnl_attr_put_u8(nlh, IFLA_VXLAN_LEARNING, 0);
+	mnl_attr_put_u16(nlh, IFLA_VXLAN_PORT, vxlan_port);
+	mnl_attr_nest_end(nlh, na_vxlan);
+	mnl_attr_nest_end(nlh, na_info);
+	assert(sizeof(buf) >= nlh->nlmsg_len);
+	ret = flow_tcf_nl_ack(tcf, nlh, 0, NULL, NULL);
+	if (ret)
+		DRV_LOG(WARNING,
+			"netlink: VTEP %s create failure (%d)",
+			name, rte_errno);
+	else
+		vtep->created = 1;
+	if (ret && ifouter)
+		ret = 0;
+	else
+		ret = if_nametoindex(name);
+	if (ret) {
+		vtep->ifindex = ret;
+		vtep->ifouter = ifouter;
+		memset(buf, 0, sizeof(buf));
+		nlh = mnl_nlmsg_put_header(buf);
+		nlh->nlmsg_type = RTM_NEWLINK;
+		nlh->nlmsg_flags = NLM_F_REQUEST;
+		ifm = mnl_nlmsg_put_extra_header(nlh, sizeof(*ifm));
+		ifm->ifi_family = AF_UNSPEC;
+		ifm->ifi_type = 0;
+		ifm->ifi_index = vtep->ifindex;
+		ifm->ifi_flags = IFF_UP;
+		ifm->ifi_change = IFF_UP;
+		ret = flow_tcf_nl_ack(tcf, nlh, 0, NULL, NULL);
+		if (ret) {
+			DRV_LOG(WARNING,
+				"netlink: VTEP %s set link up failure (%d)",
+				name, rte_errno);
+			rte_free(vtep);
+			rte_flow_error_set
+				(error, -errno,
+				 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+				 "netlink: failed to set VTEP link up");
+			vtep = NULL;
+		} else {
+			ret = mlx5_flow_tcf_init(tcf, vtep->ifindex, error);
+			if (ret)
+				DRV_LOG(WARNING,
+				"VTEP %s init failure (%d)", name, rte_errno);
+		}
+	} else {
+		DRV_LOG(WARNING,
+			"VTEP %s failed to get index (%d)", name, errno);
+		rte_flow_error_set
+			(error, -errno,
+			 RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+			 !vtep->created ? "netlink: failed to create VTEP" :
+			 "netlink: failed to retrieve VTEP ifindex");
+			 ret = 1;
+	}
+	if (ret) {
+		flow_tcf_delete_iface(tcf, vtep);
+		vtep = NULL;
+	}
+	DRV_LOG(INFO, "VTEP create (%d, %s)", vtep->port, vtep ? "OK" : "error");
+	return vtep;
+}
+#endif /* HAVE_IFLA_VXLAN_COLLECT_METADATA */
+
+/**
+ * Create target interface index for VXLAN tunneling decapsulation.
+ * In order to share the UDP port within the other interfaces the
+ * VXLAN device created as not attached to any interface (if created).
+ *
+ * @param[in] tcf
+ *   Context object initialized by mlx5_flow_tcf_context_create().
+ * @param[in] dev_flow
+ *   Flow tcf object with tunnel structure pointer set.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL.
+ * @return
+ *   Interface index on success, zero otherwise and rte_errno is set.
+ */
+static unsigned int
+flow_tcf_decap_vtep_create(struct mlx5_flow_tcf_context *tcf,
+			   struct mlx5_flow *dev_flow,
+			   struct rte_flow_error *error)
+{
+	struct mlx5_flow_tcf_vtep *vtep, *vlst;
+	uint16_t port = dev_flow->tcf.vxlan_decap->udp_port;
+
+	vtep = NULL;
+	LIST_FOREACH(vlst, &vtep_list_vxlan, next) {
+		if (vlst->port == port) {
+			vtep = vlst;
+			break;
+		}
+	}
+	if (!vtep) {
+		vtep = flow_tcf_create_iface(tcf, 0, port, error);
+		if (vtep)
+			LIST_INSERT_HEAD(&vtep_list_vxlan, vtep, next);
+	} else {
+		if (vtep->ifouter) {
+			rte_flow_error_set(error, -errno,
+				RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+				"Failed to create decap VTEP, attached "
+				"device with the same UDP port exists");
+				vtep = NULL;
+		}
+	}
+	if (vtep) {
+		vtep->refcnt++;
+		assert(vtep->ifindex);
+		return vtep->ifindex;
+	} else {
+		return 0;
+	}
+}
+
+/**
+ * Creates target interface index for VXLAN tunneling encapsulation.
+ *
+ * @param[in] tcf
+ *   Context object initialized by mlx5_flow_tcf_context_create().
+ * @param[in] ifouter
+ *   Network interface index to attach VXLAN encap device to.
+ * @param[in] dev_flow
+ *   Flow tcf object with tunnel structure pointer set.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL.
+ * @return
+ *   Interface index on success, zero otherwise and rte_errno is set.
+ */
+static unsigned int
+flow_tcf_encap_vtep_create(struct mlx5_flow_tcf_context *tcf,
+			    unsigned int ifouter,
+			    struct mlx5_flow *dev_flow __rte_unused,
+			    struct rte_flow_error *error)
+{
+	static uint16_t encap_port = MLX5_VXLAN_PORT_RANGE_MIN - 1;
+	struct mlx5_flow_tcf_vtep *vtep, *vlst;
+
+	assert(ifouter);
+	/* Look whether the attached VTEP for encap is created. */
+	vtep = NULL;
+	LIST_FOREACH(vlst, &vtep_list_vxlan, next) {
+		if (vlst->ifouter == ifouter) {
+			vtep = vlst;
+			break;
+		}
+	}
+	if (!vtep) {
+		uint16_t pcnt;
+
+		/* Not found, we should create the new attached VTEP. */
+/*
+ * TODO: not implemented yet
+ * flow_tcf_encap_iface_cleanup(tcf, ifouter);
+ * flow_tcf_encap_local_cleanup(tcf, ifouter);
+ * flow_tcf_encap_neigh_cleanup(tcf, ifouter);
+ */
+		for (pcnt = 0; pcnt <= (MLX5_VXLAN_PORT_RANGE_MAX
+				     - MLX5_VXLAN_PORT_RANGE_MIN); pcnt++) {
+			encap_port++;
+			/* Wraparound the UDP port index. */
+			if (encap_port < MLX5_VXLAN_PORT_RANGE_MIN ||
+			    encap_port > MLX5_VXLAN_PORT_RANGE_MAX)
+				encap_port = MLX5_VXLAN_PORT_RANGE_MIN;
+			/* Check whether UDP port is in already in use. */
+			vtep = NULL;
+			LIST_FOREACH(vlst, &vtep_list_vxlan, next) {
+				if (vlst->port == encap_port) {
+					vtep = vlst;
+					break;
+				}
+			}
+			if (vtep) {
+				vtep = NULL;
+				continue;
+			}
+			vtep = flow_tcf_create_iface(tcf, ifouter,
+						     encap_port, error);
+			if (vtep) {
+				LIST_INSERT_HEAD(&vtep_list_vxlan, vtep, next);
+				break;
+			}
+			if (rte_errno != EEXIST)
+				break;
+		}
+	}
+	if (!vtep)
+		return 0;
+	vtep->refcnt++;
+	assert(vtep->ifindex);
+	return vtep->ifindex;
+}
+
+/**
+ * Creates target interface index for tunneling of any type.
+ *
+ * @param[in] tcf
+ *   Context object initialized by mlx5_flow_tcf_context_create().
+ * @param[in] ifouter
+ *   Network interface index to attach VXLAN encap device to.
+ * @param[in] dev_flow
+ *   Flow tcf object with tunnel structure pointer set.
+ * @param[out] error
+ *   Perform verbose error reporting if not NULL.
+ * @return
+ *   Interface index on success, zero otherwise and rte_errno is set.
+ */
+static unsigned int
+flow_tcf_tunnel_vtep_create(struct mlx5_flow_tcf_context *tcf,
+			    unsigned int ifouter,
+			    struct mlx5_flow *dev_flow,
+			    struct rte_flow_error *error)
+{
+	unsigned int ret;
+
+	assert(dev_flow->tcf.tunnel);
+	pthread_mutex_lock(&vtep_list_mutex);
+	switch (dev_flow->tcf.tunnel->type) {
+	case MLX5_FLOW_TCF_TUNACT_VXLAN_ENCAP:
+		ret = flow_tcf_encap_vtep_create(tcf, ifouter,
+						 dev_flow, error);
+		break;
+	case MLX5_FLOW_TCF_TUNACT_VXLAN_DECAP:
+		ret = flow_tcf_decap_vtep_create(tcf, dev_flow, error);
+		break;
+	default:
+		rte_flow_error_set(error, ENOTSUP,
+				RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
+				"unsupported tunnel type");
+		ret = 0;
+		break;
+	}
+	pthread_mutex_unlock(&vtep_list_mutex);
+	return ret;
+}
+
+/**
+ * Deletes tunneling interface by UDP port.
+ *
+ * @param[in] tcf
+ *   Context object initialized by mlx5_flow_tcf_context_create().
+ * @param[in] ifindex
+ *   Network interface index of VXLAN device.
+ * @param[in] dev_flow
+ *   Flow tcf object with tunnel structure pointer set.
+ */
+static void
+flow_tcf_tunnel_vtep_delete(struct mlx5_flow_tcf_context *tcf,
+			    unsigned int ifindex,
+			    struct mlx5_flow *dev_flow)
+{
+	struct mlx5_flow_tcf_vtep *vtep, *vlst;
+
+	assert(dev_flow->tcf.tunnel);
+	pthread_mutex_lock(&vtep_list_mutex);
+	vtep = NULL;
+	LIST_FOREACH(vlst, &vtep_list_vxlan, next) {
+		if (vlst->ifindex == ifindex) {
+			vtep = vlst;
+			break;
+		}
+	}
+	if (!vtep) {
+		DRV_LOG(WARNING, "No VTEP device found in the list");
+		goto exit;
+	}
+	switch (dev_flow->tcf.tunnel->type) {
+	case MLX5_FLOW_TCF_TUNACT_VXLAN_DECAP:
+		break;
+	case MLX5_FLOW_TCF_TUNACT_VXLAN_ENCAP:
+/*
+ * TODO: Remove the encap ancillary rules first.
+ * flow_tcf_encap_neigh(tcf, vtep, dev_flow, false, NULL);
+ * flow_tcf_encap_local(tcf, vtep, dev_flow, false, NULL);
+ */
+		break;
+	default:
+		assert(false);
+		DRV_LOG(WARNING, "Unsupported tunnel type");
+		break;
+	}
+	assert(dev_flow->tcf.tunnel->ifindex_tun == vtep->ifindex);
+	assert(vtep->refcnt);
+	if (!vtep->refcnt || !--vtep->refcnt) {
+		LIST_REMOVE(vtep, next);
+		flow_tcf_delete_iface(tcf, vtep);
+	}
+exit:
+	pthread_mutex_unlock(&vtep_list_mutex);
+}
+
 /**
  * Apply flow to E-Switch by sending Netlink message.
  *
@@ -3461,18 +3887,61 @@ struct pedit_parser {
 	       struct rte_flow_error *error)
 {
 	struct priv *priv = dev->data->dev_private;
-	struct mlx5_flow_tcf_context *nl = priv->tcf_context;
+	struct mlx5_flow_tcf_context *tcf = priv->tcf_context;
 	struct mlx5_flow *dev_flow;
 	struct nlmsghdr *nlh;
+	int ret;
 
 	dev_flow = LIST_FIRST(&flow->dev_flows);
 	/* E-Switch flow can't be expanded. */
 	assert(!LIST_NEXT(dev_flow, next));
+	if (dev_flow->tcf.applied)
+		return 0;
 	nlh = dev_flow->tcf.nlh;
 	nlh->nlmsg_type = RTM_NEWTFILTER;
 	nlh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE | NLM_F_EXCL;
-	if (!flow_tcf_nl_ack(nl, nlh, 0, NULL, NULL))
+	if (dev_flow->tcf.tunnel) {
+		/*
+		 * Replace the interface index, target for
+		 * encapsulation, source for decapsulation.
+		 */
+		assert(!dev_flow->tcf.tunnel->ifindex_tun);
+		assert(dev_flow->tcf.tunnel->ifindex_ptr);
+		/* Create actual VTEP device when rule is being applied. */
+		dev_flow->tcf.tunnel->ifindex_tun
+			= flow_tcf_tunnel_vtep_create(tcf,
+					*dev_flow->tcf.tunnel->ifindex_ptr,
+					dev_flow, error);
+			DRV_LOG(INFO, "Replace ifindex: %d->%d",
+				dev_flow->tcf.tunnel->ifindex_tun,
+				*dev_flow->tcf.tunnel->ifindex_ptr);
+		if (!dev_flow->tcf.tunnel->ifindex_tun)
+			return -rte_errno;
+		dev_flow->tcf.tunnel->ifindex_org
+			= *dev_flow->tcf.tunnel->ifindex_ptr;
+		*dev_flow->tcf.tunnel->ifindex_ptr
+			= dev_flow->tcf.tunnel->ifindex_tun;
+	}
+	ret = flow_tcf_nl_ack(tcf, nlh, 0, NULL, NULL);
+	if (dev_flow->tcf.tunnel) {
+		DRV_LOG(INFO, "Restore ifindex: %d->%d",
+				dev_flow->tcf.tunnel->ifindex_org,
+				*dev_flow->tcf.tunnel->ifindex_ptr);
+		*dev_flow->tcf.tunnel->ifindex_ptr
+			= dev_flow->tcf.tunnel->ifindex_org;
+		dev_flow->tcf.tunnel->ifindex_org = 0;
+	}
+	if (!ret) {
+		dev_flow->tcf.applied = 1;
 		return 0;
+	}
+	DRV_LOG(WARNING, "netlink: failed to create TC rule (%d)", rte_errno);
+	if (dev_flow->tcf.tunnel->ifindex_tun) {
+		flow_tcf_tunnel_vtep_delete(tcf,
+					    dev_flow->tcf.tunnel->ifindex_tun,
+					    dev_flow);
+		dev_flow->tcf.tunnel->ifindex_tun = 0;
+	}
 	return rte_flow_error_set(error, rte_errno,
 				  RTE_FLOW_ERROR_TYPE_UNSPECIFIED, NULL,
 				  "netlink: failed to create TC flow rule");
@@ -3490,7 +3959,7 @@ struct pedit_parser {
 flow_tcf_remove(struct rte_eth_dev *dev, struct rte_flow *flow)
 {
 	struct priv *priv = dev->data->dev_private;
-	struct mlx5_flow_tcf_context *nl = priv->tcf_context;
+	struct mlx5_flow_tcf_context *tcf = priv->tcf_context;
 	struct mlx5_flow *dev_flow;
 	struct nlmsghdr *nlh;
 
@@ -3501,10 +3970,36 @@ struct pedit_parser {
 		return;
 	/* E-Switch flow can't be expanded. */
 	assert(!LIST_NEXT(dev_flow, next));
+	if (!dev_flow->tcf.applied)
+		return;
+	if (dev_flow->tcf.tunnel) {
+		/*
+		 * Replace the interface index, target for
+		 * encapsulation, source for decapsulation.
+		 */
+		assert(dev_flow->tcf.tunnel->ifindex_tun);
+		assert(dev_flow->tcf.tunnel->ifindex_ptr);
+		dev_flow->tcf.tunnel->ifindex_org
+			= *dev_flow->tcf.tunnel->ifindex_ptr;
+		*dev_flow->tcf.tunnel->ifindex_ptr
+			= dev_flow->tcf.tunnel->ifindex_tun;
+	}
 	nlh = dev_flow->tcf.nlh;
 	nlh->nlmsg_type = RTM_DELTFILTER;
 	nlh->nlmsg_flags = NLM_F_REQUEST;
-	flow_tcf_nl_ack(nl, nlh, 0, NULL, NULL);
+	flow_tcf_nl_ack(tcf, nlh, 0, NULL, NULL);
+	if (dev_flow->tcf.tunnel) {
+		*dev_flow->tcf.tunnel->ifindex_ptr
+			= dev_flow->tcf.tunnel->ifindex_org;
+		dev_flow->tcf.tunnel->ifindex_org = 0;
+		if (dev_flow->tcf.tunnel->ifindex_tun) {
+			flow_tcf_tunnel_vtep_delete(tcf,
+					dev_flow->tcf.tunnel->ifindex_tun,
+					dev_flow);
+			dev_flow->tcf.tunnel->ifindex_tun = 0;
+		}
+	}
+	dev_flow->tcf.applied = 0;
 }
 
 /**
-- 
1.8.3.1

  parent reply	other threads:[~2018-10-15 14:14 UTC|newest]

Thread overview: 110+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-02  6:30 [dpdk-dev] [PATCH 1/5] net/mlx5: add VXLAN encap/decap support for e-switch Slava Ovsiienko
2018-10-02  6:30 ` [dpdk-dev] [PATCH 2/5] net/mlx5: e-switch VXLAN netlink routines update Slava Ovsiienko
2018-10-02  6:30 ` [dpdk-dev] [PATCH 3/5] net/mlx5: e-switch VXLAN flow validation routine Slava Ovsiienko
2018-10-02  6:30 ` [dpdk-dev] [PATCH 4/5] net/mlx5: e-switch VXLAN flow translation routine Slava Ovsiienko
2018-10-02  6:30 ` [dpdk-dev] [PATCH 5/5] net/mlx5: e-switch VXLAN tunnel devices management Slava Ovsiienko
2018-10-15 14:13 ` [dpdk-dev] [PATCH v2 0/7] net/mlx5: e-switch VXLAN encap/decap hardware offload Viacheslav Ovsiienko
2018-10-15 14:13   ` [dpdk-dev] [PATCH v2 1/7] net/mlx5: e-switch VXLAN configuration and definitions Viacheslav Ovsiienko
2018-10-23 10:01     ` Yongseok Koh
2018-10-25 12:50       ` Slava Ovsiienko
2018-10-25 23:33         ` Yongseok Koh
2018-10-15 14:13   ` [dpdk-dev] [PATCH v2 2/7] net/mlx5: e-switch VXLAN flow validation routine Viacheslav Ovsiienko
2018-10-23 10:04     ` Yongseok Koh
2018-10-25 13:53       ` Slava Ovsiienko
2018-10-26  3:07         ` Yongseok Koh
2018-10-26  8:39           ` Slava Ovsiienko
2018-10-26 21:56             ` Yongseok Koh
2018-10-29  9:33               ` Slava Ovsiienko
2018-10-29 18:26                 ` Yongseok Koh
2018-10-15 14:13   ` [dpdk-dev] [PATCH v2 3/7] net/mlx5: e-switch VXLAN flow translation routine Viacheslav Ovsiienko
2018-10-23 10:06     ` Yongseok Koh
2018-10-25 14:37       ` Slava Ovsiienko
2018-10-26  4:22         ` Yongseok Koh
2018-10-26  9:06           ` Slava Ovsiienko
2018-10-26 22:10             ` Yongseok Koh
2018-10-15 14:13   ` [dpdk-dev] [PATCH v2 4/7] net/mlx5: e-switch VXLAN netlink routines update Viacheslav Ovsiienko
2018-10-23 10:07     ` Yongseok Koh
2018-10-15 14:13   ` Viacheslav Ovsiienko [this message]
2018-10-25  0:28     ` [dpdk-dev] [PATCH v2 5/7] net/mlx5: e-switch VXLAN tunnel devices management Yongseok Koh
2018-10-25 20:21       ` Slava Ovsiienko
2018-10-26  6:25         ` Yongseok Koh
2018-10-26  9:35           ` Slava Ovsiienko
2018-10-26 22:42             ` Yongseok Koh
2018-10-29 11:53               ` Slava Ovsiienko
2018-10-29 18:42                 ` Yongseok Koh
2018-10-15 14:13   ` [dpdk-dev] [PATCH v2 6/7] net/mlx5: e-switch VXLAN encapsulation rules management Viacheslav Ovsiienko
2018-10-25  0:33     ` Yongseok Koh
2018-10-15 14:13   ` [dpdk-dev] [PATCH v2 7/7] net/mlx5: e-switch VXLAN rule cleanup routines Viacheslav Ovsiienko
2018-10-25  0:36     ` Yongseok Koh
2018-10-25 20:32       ` Slava Ovsiienko
2018-10-26  6:30         ` Yongseok Koh
2018-11-01 12:19   ` [dpdk-dev] [PATCH v3 00/13] net/mlx5: e-switch VXLAN encap/decap hardware offload Slava Ovsiienko
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 01/13] net/mlx5: prepare makefile for adding e-switch VXLAN Slava Ovsiienko
2018-11-01 20:33       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 02/13] net/mlx5: prepare meson.build " Slava Ovsiienko
2018-11-01 20:33       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 03/13] net/mlx5: add necessary definitions for " Slava Ovsiienko
2018-11-01 20:35       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 04/13] net/mlx5: add necessary structures " Slava Ovsiienko
2018-11-01 20:36       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 05/13] net/mlx5: swap items/actions validations for e-switch rules Slava Ovsiienko
2018-11-01 20:37       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 06/13] net/mlx5: add e-switch VXLAN support to validation routine Slava Ovsiienko
2018-11-01 20:49       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 07/13] net/mlx5: add VXLAN support to flow prepare routine Slava Ovsiienko
2018-11-01 21:03       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 08/13] net/mlx5: add VXLAN support to flow translate routine Slava Ovsiienko
2018-11-01 21:18       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 09/13] net/mlx5: e-switch VXLAN netlink routines update Slava Ovsiienko
2018-11-01 21:21       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 10/13] net/mlx5: fix e-switch Flow counter deletion Slava Ovsiienko
2018-11-01 22:00       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 11/13] net/mlx5: add e-switch VXLAN tunnel devices management Slava Ovsiienko
2018-11-01 23:59       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 12/13] net/mlx5: add e-switch VXLAN encapsulation rules Slava Ovsiienko
2018-11-02  0:01       ` Yongseok Koh
2018-11-01 12:19     ` [dpdk-dev] [PATCH v3 13/13] net/mlx5: add e-switch VXLAN rule cleanup routines Slava Ovsiienko
2018-11-02  0:01       ` Yongseok Koh
2018-11-01 20:32     ` [dpdk-dev] [PATCH v3 00/13] net/mlx5: e-switch VXLAN encap/decap hardware offload Yongseok Koh
2018-11-02 17:53     ` [dpdk-dev] [PATCH v4 " Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 01/13] net/mlx5: prepare makefile for adding E-Switch VXLAN Slava Ovsiienko
2018-11-03  6:18         ` [dpdk-dev] [PATCH v5 00/13] net/mlx5: e-switch VXLAN encap/decap hardware offload Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 01/13] net/mlx5: prepare makefile for adding E-Switch VXLAN Slava Ovsiienko
2018-11-12 20:01             ` [dpdk-dev] [PATCH 0/4] net/mlx5: prepare to add E-switch rule flags check Slava Ovsiienko
2018-11-12 20:01               ` [dpdk-dev] [PATCH 1/4] net/mlx5: prepare Netlink communication routine to fix Slava Ovsiienko
2018-11-13 13:21                 ` Shahaf Shuler
2018-11-12 20:01               ` [dpdk-dev] [PATCH 2/4] net/mlx5: fix Netlink communication routine Slava Ovsiienko
2018-11-13 13:21                 ` Shahaf Shuler
2018-11-14 12:57                   ` Slava Ovsiienko
2018-11-12 20:01               ` [dpdk-dev] [PATCH 3/4] net/mlx5: prepare to add E-switch rule flags check Slava Ovsiienko
2018-11-12 20:01               ` [dpdk-dev] [PATCH 4/4] net/mlx5: add E-switch rule hardware offload flag check Slava Ovsiienko
2018-11-13 13:21               ` [dpdk-dev] [PATCH 0/4] net/mlx5: prepare to add E-switch rule flags check Shahaf Shuler
2018-11-14 14:56                 ` Shahaf Shuler
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 02/13] net/mlx5: prepare meson.build for adding E-Switch VXLAN Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 03/13] net/mlx5: add necessary definitions for " Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 04/13] net/mlx5: add necessary structures " Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 05/13] net/mlx5: swap items/actions validations for E-Switch rules Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 06/13] net/mlx5: add E-Switch VXLAN support to validation routine Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 07/13] net/mlx5: add VXLAN support to flow prepare routine Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 08/13] net/mlx5: add VXLAN support to flow translate routine Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 09/13] net/mlx5: update E-Switch VXLAN netlink routines Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 10/13] net/mlx5: fix E-Switch Flow counter deletion Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 11/13] net/mlx5: add E-switch VXLAN tunnel devices management Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 12/13] net/mlx5: add E-Switch VXLAN encapsulation rules Slava Ovsiienko
2018-11-03  6:18           ` [dpdk-dev] [PATCH v5 13/13] net/mlx5: add E-switch VXLAN rule cleanup routines Slava Ovsiienko
2018-11-04  6:48           ` [dpdk-dev] [PATCH v5 00/13] net/mlx5: e-switch VXLAN encap/decap hardware offload Shahaf Shuler
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 02/13] net/mlx5: prepare meson.build for adding E-Switch VXLAN Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 03/13] net/mlx5: add necessary definitions for " Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 04/13] net/mlx5: add necessary structures " Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 05/13] net/mlx5: swap items/actions validations for E-Switch rules Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 06/13] net/mlx5: add E-Switch VXLAN support to validation routine Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 07/13] net/mlx5: add VXLAN support to flow prepare routine Slava Ovsiienko
2018-11-02 21:38         ` Yongseok Koh
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 08/13] net/mlx5: add VXLAN support to flow translate routine Slava Ovsiienko
2018-11-02 21:53         ` Yongseok Koh
2018-11-02 23:29           ` Yongseok Koh
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 09/13] net/mlx5: update E-Switch VXLAN netlink routines Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 10/13] net/mlx5: fix E-Switch Flow counter deletion Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 11/13] net/mlx5: add E-switch VXLAN tunnel devices management Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 12/13] net/mlx5: add E-Switch VXLAN encapsulation rules Slava Ovsiienko
2018-11-02 17:53       ` [dpdk-dev] [PATCH v4 13/13] net/mlx5: add E-switch VXLAN rule cleanup routines Slava Ovsiienko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1539612815-47199-6-git-send-email-viacheslavo@mellanox.com \
    --to=viacheslavo@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=shahafs@mellanox.com \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).