From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v3 51/56] net/txgbe: add register dump support
Date: Wed, 14 Oct 2020 13:55:12 +0800 [thread overview]
Message-ID: <20201014055517.1214386-52-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20201014055517.1214386-1-jiawenwu@trustnetic.com>
Add register dump support.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/features/txgbe.ini | 1 +
drivers/net/txgbe/base/txgbe_type.h | 1 +
drivers/net/txgbe/txgbe_ethdev.c | 113 +++++++++++++++++++++++++++
drivers/net/txgbe/txgbe_regs_group.h | 54 +++++++++++++
4 files changed, 169 insertions(+)
create mode 100644 drivers/net/txgbe/txgbe_regs_group.h
diff --git a/doc/guides/nics/features/txgbe.ini b/doc/guides/nics/features/txgbe.ini
index 08a412cf6..20a02706c 100644
--- a/doc/guides/nics/features/txgbe.ini
+++ b/doc/guides/nics/features/txgbe.ini
@@ -41,6 +41,7 @@ Stats per queue = Y
FW version = Y
EEPROM dump = Y
Module EEPROM dump = Y
+Registers dump = Y
Multiprocess aware = Y
Linux UIO = Y
Linux VFIO = Y
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index ac36cb22d..b322a2cac 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -665,6 +665,7 @@ struct txgbe_hw {
u16 vendor_id;
u16 subsystem_device_id;
u16 subsystem_vendor_id;
+ u8 revision_id;
bool adapter_stopped;
bool allow_unsupported_sfp;
bool need_crosstalk_fix;
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index e48fad576..86d0a5ac9 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -21,6 +21,72 @@
#include "base/txgbe.h"
#include "txgbe_ethdev.h"
#include "txgbe_rxtx.h"
+#include "txgbe_regs_group.h"
+
+static const struct reg_info txgbe_regs_general[] = {
+ {TXGBE_RST, 1, 1, "TXGBE_RST"},
+ {TXGBE_STAT, 1, 1, "TXGBE_STAT"},
+ {TXGBE_PORTCTL, 1, 1, "TXGBE_PORTCTL"},
+ {TXGBE_SDP, 1, 1, "TXGBE_SDP"},
+ {TXGBE_SDPCTL, 1, 1, "TXGBE_SDPCTL"},
+ {TXGBE_LEDCTL, 1, 1, "TXGBE_LEDCTL"},
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_nvm[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_interrupt[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_fctl_others[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_rxdma[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_rx[] = {
+ {0, 0, 0, ""}
+};
+
+static struct reg_info txgbe_regs_tx[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_wakeup[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_dcb[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_mac[] = {
+ {0, 0, 0, ""}
+};
+
+static const struct reg_info txgbe_regs_diagnostic[] = {
+ {0, 0, 0, ""},
+};
+
+/* PF registers */
+static const struct reg_info *txgbe_regs_others[] = {
+ txgbe_regs_general,
+ txgbe_regs_nvm,
+ txgbe_regs_interrupt,
+ txgbe_regs_fctl_others,
+ txgbe_regs_rxdma,
+ txgbe_regs_rx,
+ txgbe_regs_tx,
+ txgbe_regs_wakeup,
+ txgbe_regs_dcb,
+ txgbe_regs_mac,
+ txgbe_regs_diagnostic,
+ NULL};
static int txgbe_dev_set_link_up(struct rte_eth_dev *dev);
static int txgbe_dev_set_link_down(struct rte_eth_dev *dev);
@@ -3414,6 +3480,52 @@ txgbe_dev_set_mc_addr_list(struct rte_eth_dev *dev,
txgbe_dev_addr_list_itr, TRUE);
}
+static int
+txgbe_get_reg_length(struct rte_eth_dev *dev __rte_unused)
+{
+ int count = 0;
+ int g_ind = 0;
+ const struct reg_info *reg_group;
+ const struct reg_info **reg_set = txgbe_regs_others;
+
+ while ((reg_group = reg_set[g_ind++]))
+ count += txgbe_regs_group_count(reg_group);
+
+ return count;
+}
+
+static int
+txgbe_get_regs(struct rte_eth_dev *dev,
+ struct rte_dev_reg_info *regs)
+{
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+ uint32_t *data = regs->data;
+ int g_ind = 0;
+ int count = 0;
+ const struct reg_info *reg_group;
+ const struct reg_info **reg_set = txgbe_regs_others;
+
+ if (data == NULL) {
+ regs->length = txgbe_get_reg_length(dev);
+ regs->width = sizeof(uint32_t);
+ return 0;
+ }
+
+ /* Support only full register dump */
+ if (regs->length == 0 ||
+ regs->length == (uint32_t)txgbe_get_reg_length(dev)) {
+ regs->version = hw->mac.type << 24 |
+ hw->revision_id << 16 |
+ hw->device_id;
+ while ((reg_group = reg_set[g_ind++]))
+ count += txgbe_read_regs_group(dev, &data[count],
+ reg_group);
+ return 0;
+ }
+
+ return -ENOTSUP;
+}
+
static int
txgbe_get_eeprom_length(struct rte_eth_dev *dev)
{
@@ -3601,6 +3713,7 @@ static const struct eth_dev_ops txgbe_eth_dev_ops = {
.set_mc_addr_list = txgbe_dev_set_mc_addr_list,
.rxq_info_get = txgbe_rxq_info_get,
.txq_info_get = txgbe_txq_info_get,
+ .get_reg = txgbe_get_regs,
.get_eeprom_length = txgbe_get_eeprom_length,
.get_eeprom = txgbe_get_eeprom,
.set_eeprom = txgbe_set_eeprom,
diff --git a/drivers/net/txgbe/txgbe_regs_group.h b/drivers/net/txgbe/txgbe_regs_group.h
new file mode 100644
index 000000000..6f8f0bc29
--- /dev/null
+++ b/drivers/net/txgbe/txgbe_regs_group.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2020
+ */
+
+#ifndef _TXGBE_REGS_GROUP_H_
+#define _TXGBE_REGS_GROUP_H_
+
+#include "txgbe_ethdev.h"
+
+struct txgbe_hw;
+struct reg_info {
+ uint32_t base_addr;
+ uint32_t count;
+ uint32_t stride;
+ const char *name;
+};
+
+static inline int
+txgbe_read_regs(struct txgbe_hw *hw, const struct reg_info *reg,
+ uint32_t *reg_buf)
+{
+ unsigned int i;
+
+ for (i = 0; i < reg->count; i++)
+ reg_buf[i] = rd32(hw,
+ reg->base_addr + i * reg->stride);
+ return reg->count;
+};
+
+static inline int
+txgbe_regs_group_count(const struct reg_info *regs)
+{
+ int count = 0;
+ int i = 0;
+
+ while (regs[i].count)
+ count += regs[i++].count;
+ return count;
+};
+
+static inline int
+txgbe_read_regs_group(struct rte_eth_dev *dev, uint32_t *reg_buf,
+ const struct reg_info *regs)
+{
+ int count = 0;
+ int i = 0;
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+
+ while (regs[i].count)
+ count += txgbe_read_regs(hw, ®s[i++], ®_buf[count]);
+ return count;
+};
+
+#endif /* _TXGBE_REGS_GROUP_H_ */
--
2.18.4
next prev parent reply other threads:[~2020-10-14 6:15 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 5:54 [dpdk-dev] [PATCH v3 00/56] net: txgbe PMD Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 01/56] net/txgbe: add build and doc infrastructure Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 02/56] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-10-15 0:56 ` Ferruh Yigit
2020-10-16 9:52 ` Jiawen Wu
2020-10-16 10:33 ` Ferruh Yigit
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 03/56] net/txgbe: add device init and uninit Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 04/56] net/txgbe: add error types and registers Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 05/56] net/txgbe: add MAC type and bus lan id Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 06/56] net/txgbe: add HW infrastructure and dummy function Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 07/56] net/txgbe: add EEPROM functions Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 08/56] net/txgbe: add HW init and reset operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 09/56] net/txgbe: add PHY init Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 10/56] net/txgbe: add module identify Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 11/56] net/txgbe: add PHY reset Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 12/56] net/txgbe: add info get operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 13/56] net/txgbe: add interrupt operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 14/56] net/txgbe: add device configure operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 15/56] net/txgbe: add link status change Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 16/56] net/txgbe: add multi-speed link setup Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 17/56] net/txgbe: add autoc read and write Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 18/56] net/txgbe: add MAC address operations Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 19/56] net/txgbe: add unicast hash bitmap Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 20/56] net/txgbe: add Rx and Tx init Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 21/56] net/txgbe: add Rx and Tx queues setup and release Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 22/56] net/txgbe: add Rx and Tx start and stop Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 23/56] net/txgbe: add packet type Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 24/56] net/txgbe: fill simple transmit function Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 25/56] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 26/56] net/txgbe: fill Tx prepare function Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 27/56] net/txgbe: fill receive functions Jiawen Wu
2020-10-15 0:55 ` Ferruh Yigit
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 28/56] net/txgbe: add device start operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 29/56] net/txgbe: add Rx and Tx data path start and stop Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 30/56] net/txgbe: add device stop and close operations Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 31/56] net/txgbe: support Rx interrupt Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 32/56] net/txgbe: add Rx and Tx queue info get Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 33/56] net/txgbe: add device stats get Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 34/56] net/txgbe: add device xstats get Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 35/56] net/txgbe: add queue stats mapping Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 36/56] net/txgbe: add VLAN handle support Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 37/56] net/txgbe: add SWFW semaphore and lock Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 38/56] net/txgbe: add PF module init and uninit for SRIOV Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 39/56] net/txgbe: add process mailbox operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 40/56] net/txgbe: add PF module configure for SRIOV Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 41/56] net/txgbe: add VMDq configure Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 42/56] net/txgbe: add RSS support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 43/56] net/txgbe: add DCB support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 44/56] net/txgbe: add flow control support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 45/56] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 46/56] net/txgbe: add priority flow control support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 47/56] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 48/56] net/txgbe: add MTU set operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 49/56] net/txgbe: add FW version get operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 50/56] net/txgbe: add EEPROM info " Jiawen Wu
2020-10-14 5:55 ` Jiawen Wu [this message]
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 52/56] net/txgbe: support device LED on and off Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 53/56] net/txgbe: add mirror rule operations Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 54/56] net/txgbe: add PTP support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 55/56] net/txgbe: add DCB info get operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 56/56] net/txgbe: add Rx and Tx descriptor status Jiawen Wu
2020-10-15 0:55 ` Ferruh Yigit
2020-10-15 0:56 ` [dpdk-dev] [PATCH v3 00/56] net: txgbe PMD Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201014055517.1214386-52-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).