DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To: dev@dpdk.org, Yongseok Koh <yskoh@mellanox.com>
Cc: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: [dpdk-dev] [PATCH v4 17/21] net/mlx5: add flow VXLAN item
Date: Thu, 12 Jul 2018 11:31:03 +0200	[thread overview]
Message-ID: <41aa019d60a28ab271c465e86579e232a2471060.1531387413.git.nelio.laranjeiro@6wind.com> (raw)
In-Reply-To: <cover.1531387413.git.nelio.laranjeiro@6wind.com>

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
---
 drivers/net/mlx5/mlx5_flow.c | 190 +++++++++++++++++++++++++++++------
 drivers/net/mlx5/mlx5_rxtx.h |   1 +
 2 files changed, 163 insertions(+), 28 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 84bd99b3e..7eb5d7da3 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -51,6 +51,9 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
 #define MLX5_FLOW_LAYER_INNER_L4_TCP (1u << 10)
 #define MLX5_FLOW_LAYER_INNER_VLAN (1u << 11)
 
+/* Pattern tunnel Layer bits. */
+#define MLX5_FLOW_LAYER_VXLAN (1u << 12)
+
 /* Outer Masks. */
 #define MLX5_FLOW_LAYER_OUTER_L3 \
 	(MLX5_FLOW_LAYER_OUTER_L3_IPV4 | MLX5_FLOW_LAYER_OUTER_L3_IPV6)
@@ -61,7 +64,7 @@ extern const struct eth_dev_ops mlx5_dev_ops_isolate;
 	 MLX5_FLOW_LAYER_OUTER_L4)
 
 /* Tunnel Masks. */
-#define MLX5_FLOW_LAYER_TUNNEL 0
+#define MLX5_FLOW_LAYER_TUNNEL MLX5_FLOW_LAYER_VXLAN
 
 /* Inner Masks. */
 #define MLX5_FLOW_LAYER_INNER_L3 \
@@ -98,6 +101,7 @@ enum mlx5_expansion {
 	MLX5_EXPANSION_OUTER_IPV6,
 	MLX5_EXPANSION_OUTER_IPV6_UDP,
 	MLX5_EXPANSION_OUTER_IPV6_TCP,
+	MLX5_EXPANSION_VXLAN,
 	MLX5_EXPANSION_ETH,
 	MLX5_EXPANSION_IPV4,
 	MLX5_EXPANSION_IPV4_UDP,
@@ -136,6 +140,7 @@ static const struct rte_flow_expand_node mlx5_support_expansion[] = {
 			ETH_RSS_NONFRAG_IPV4_OTHER,
 	},
 	[MLX5_EXPANSION_OUTER_IPV4_UDP] = {
+		.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN),
 		.type = RTE_FLOW_ITEM_TYPE_UDP,
 		.rss_types = ETH_RSS_NONFRAG_IPV4_UDP,
 	},
@@ -152,6 +157,7 @@ static const struct rte_flow_expand_node mlx5_support_expansion[] = {
 			ETH_RSS_NONFRAG_IPV6_OTHER,
 	},
 	[MLX5_EXPANSION_OUTER_IPV6_UDP] = {
+		.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_VXLAN),
 		.type = RTE_FLOW_ITEM_TYPE_UDP,
 		.rss_types = ETH_RSS_NONFRAG_IPV6_UDP,
 	},
@@ -159,6 +165,10 @@ static const struct rte_flow_expand_node mlx5_support_expansion[] = {
 		.type = RTE_FLOW_ITEM_TYPE_TCP,
 		.rss_types = ETH_RSS_NONFRAG_IPV6_TCP,
 	},
+	[MLX5_EXPANSION_VXLAN] = {
+		.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_ETH),
+		.type = RTE_FLOW_ITEM_TYPE_VXLAN,
+	},
 	[MLX5_EXPANSION_ETH] = {
 		.next = RTE_FLOW_EXPAND_RSS_NEXT(MLX5_EXPANSION_IPV4,
 						 MLX5_EXPANSION_IPV6),
@@ -226,6 +236,8 @@ struct rte_flow {
 	struct mlx5_flow_verbs *cur_verbs;
 	/**< Current Verbs flow structure being filled. */
 	struct rte_flow_action_rss rss;/**< RSS context. */
+	uint32_t tunnel_ptype;
+	/**< Store tunnel packet type data to store in Rx queue. */
 	uint8_t key[MLX5_RSS_HASH_KEY_LEN]; /**< RSS hash key. */
 	uint16_t (*queue)[]; /**< Destination queues to redirect traffic to. */
 };
@@ -1160,6 +1172,103 @@ mlx5_flow_item_tcp(const struct rte_flow_item *item, struct rte_flow *flow,
 	return size;
 }
 
+/**
+ * Convert the @p item into a Verbs specification after ensuring the NIC
+ * will understand and process it correctly.
+ * If the necessary size for the conversion is greater than the @p flow_size,
+ * nothing is written in @p flow, the validation is still performed.
+ *
+ * @param[in] item
+ *   Item specification.
+ * @param[in, out] flow
+ *   Pointer to flow structure.
+ * @param[in] flow_size
+ *   Size in bytes of the available space in @p flow, if too small, nothing is
+ *   written.
+ * @param[out] error
+ *   Pointer to error structure.
+ *
+ * @return
+ *   On success the number of bytes consumed/necessary, if the returned value
+ *   is lesser or equal to @p flow_size, the @p item has fully been converted,
+ *   otherwise another call with this returned memory size should be done.
+ *   On error, a negative errno value is returned and rte_errno is set.
+ */
+static int
+mlx5_flow_item_vxlan(const struct rte_flow_item *item, struct rte_flow *flow,
+		     const size_t flow_size, struct rte_flow_error *error)
+{
+	const struct rte_flow_item_vxlan *spec = item->spec;
+	const struct rte_flow_item_vxlan *mask = item->mask;
+	unsigned int size = sizeof(struct ibv_flow_spec_tunnel);
+	struct ibv_flow_spec_tunnel vxlan = {
+		.type = IBV_FLOW_SPEC_VXLAN_TUNNEL,
+		.size = size,
+	};
+	int ret;
+	union vni {
+		uint32_t vlan_id;
+		uint8_t vni[4];
+	} id = { .vlan_id = 0, };
+
+	if (flow->layers & MLX5_FLOW_LAYER_TUNNEL)
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ITEM,
+					  item,
+					  "a tunnel is already present");
+	/*
+	 * Verify only UDPv4 is present as defined in
+	 * https://tools.ietf.org/html/rfc7348
+	 */
+	if (!(flow->layers & MLX5_FLOW_LAYER_OUTER_L4_UDP))
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ITEM,
+					  item,
+					  "no outer UDP layer found");
+	if (!mask)
+		mask = &rte_flow_item_vxlan_mask;
+	ret = mlx5_flow_item_acceptable
+		(item, (const uint8_t *)mask,
+		 (const uint8_t *)&rte_flow_item_vxlan_mask,
+		 sizeof(struct rte_flow_item_vxlan), error);
+	if (ret < 0)
+		return ret;
+	if (spec) {
+		memcpy(&id.vni[1], spec->vni, 3);
+		vxlan.val.tunnel_id = id.vlan_id;
+		memcpy(&id.vni[1], mask->vni, 3);
+		vxlan.mask.tunnel_id = id.vlan_id;
+		/* Remove unwanted bits from values. */
+		vxlan.val.tunnel_id &= vxlan.mask.tunnel_id;
+	}
+	/*
+	 * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
+	 * only this layer is defined in the Verbs specification it is
+	 * interpreted as wildcard and all packets will match this
+	 * rule, if it follows a full stack layer (ex: eth / ipv4 /
+	 * udp), all packets matching the layers before will also
+	 * match this rule.  To avoid such situation, VNI 0 is
+	 * currently refused.
+	 */
+	if (!vxlan.val.tunnel_id)
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM,
+					  item,
+					  "VXLAN vni cannot be 0");
+	if (!(flow->layers & MLX5_FLOW_LAYER_OUTER))
+		return rte_flow_error_set(error, EINVAL,
+					  RTE_FLOW_ERROR_TYPE_ITEM,
+					  item,
+					  "VXLAN tunnel must be fully defined");
+	if (size <= flow_size) {
+		mlx5_flow_spec_verbs_add(flow, &vxlan, size);
+		flow->cur_verbs->attr->priority = MLX5_PRIORITY_MAP_L2;
+	}
+	flow->layers |= MLX5_FLOW_LAYER_VXLAN;
+	flow->tunnel_ptype = RTE_PTYPE_TUNNEL_VXLAN | RTE_PTYPE_L4_UDP;
+	return size;
+}
+
 /**
  * Convert the @p pattern into a Verbs specifications after ensuring the NIC
  * will understand and process it correctly.
@@ -1217,6 +1326,10 @@ mlx5_flow_items(const struct rte_flow_item pattern[],
 		case RTE_FLOW_ITEM_TYPE_TCP:
 			ret = mlx5_flow_item_tcp(pattern, flow, remain, error);
 			break;
+		case RTE_FLOW_ITEM_TYPE_VXLAN:
+			ret = mlx5_flow_item_vxlan(pattern, flow, remain,
+						   error);
+			break;
 		default:
 			return rte_flow_error_set(error, ENOTSUP,
 						  RTE_FLOW_ERROR_TYPE_ITEM,
@@ -1832,7 +1945,7 @@ mlx5_flow_merge(struct rte_eth_dev *dev, struct rte_flow *flow,
 }
 
 /**
- * Mark the Rx queues mark flag if the flow has a mark or flag modifier.
+ * Set the Rx queue flags (Mark/Flag and Tunnel Ptypes) according to the flow.
  *
  * @param[in] dev
  *   Pointer to Ethernet device.
@@ -1840,28 +1953,34 @@ mlx5_flow_merge(struct rte_eth_dev *dev, struct rte_flow *flow,
  *   Pointer to flow structure.
  */
 static void
-mlx5_flow_rxq_mark_set(struct rte_eth_dev *dev, struct rte_flow *flow)
+mlx5_flow_rxq_flags_set(struct rte_eth_dev *dev, struct rte_flow *flow)
 {
 	struct priv *priv = dev->data->dev_private;
+	const int mark = !!(flow->modifier &
+			    (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK));
+	const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+	unsigned int i;
 
-	if (flow->modifier & (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK)) {
-		unsigned int i;
-
-		for (i = 0; i != flow->rss.queue_num; ++i) {
-			int idx = (*flow->queue)[i];
-			struct mlx5_rxq_ctrl *rxq_ctrl =
-				container_of((*priv->rxqs)[idx],
-					     struct mlx5_rxq_ctrl, rxq);
+	for (i = 0; i != flow->rss.queue_num; ++i) {
+		int idx = (*flow->queue)[i];
+		struct mlx5_rxq_ctrl *rxq_ctrl =
+			container_of((*priv->rxqs)[idx],
+				     struct mlx5_rxq_ctrl, rxq);
 
+		if (mark) {
 			rxq_ctrl->rxq.mark = 1;
 			rxq_ctrl->flow_mark_n++;
 		}
+		if (tunnel) {
+			rxq_ctrl->rxq.tunnel = flow->tunnel_ptype;
+			rxq_ctrl->flow_vxlan_n++;
+		}
 	}
 }
 
 /**
- * Clear the Rx queue mark associated with the @p flow if no other flow uses
- * it with a mark request.
+ * Clear the Rx queue flags (Mark/Flag and Tunnel Ptype) associated with the
+ * @p flow if no other flow uses it with the same kind of request.
  *
  * @param dev
  *   Pointer to Ethernet device.
@@ -1869,33 +1988,41 @@ mlx5_flow_rxq_mark_set(struct rte_eth_dev *dev, struct rte_flow *flow)
  *   Pointer to the flow.
  */
 static void
-mlx5_flow_rxq_mark_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
+mlx5_flow_rxq_flags_trim(struct rte_eth_dev *dev, struct rte_flow *flow)
 {
 	struct priv *priv = dev->data->dev_private;
+	const int mark = !!(flow->modifier &
+			    (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK));
+	const int tunnel = !!(flow->layers & MLX5_FLOW_LAYER_TUNNEL);
+	unsigned int i;
 
-	if (flow->modifier & (MLX5_FLOW_MOD_FLAG | MLX5_FLOW_MOD_MARK)) {
-		unsigned int i;
-
-		for (i = 0; i != flow->rss.queue_num; ++i) {
-			int idx = (*flow->queue)[i];
-			struct mlx5_rxq_ctrl *rxq_ctrl =
-				container_of((*priv->rxqs)[idx],
-					     struct mlx5_rxq_ctrl, rxq);
+	assert(dev->data->dev_started);
+	for (i = 0; i != flow->rss.queue_num; ++i) {
+		int idx = (*flow->queue)[i];
+		struct mlx5_rxq_ctrl *rxq_ctrl =
+			container_of((*priv->rxqs)[idx],
+				     struct mlx5_rxq_ctrl, rxq);
 
+		if (mark) {
 			rxq_ctrl->flow_mark_n--;
 			rxq_ctrl->rxq.mark = !!rxq_ctrl->flow_mark_n;
 		}
+		if (tunnel) {
+			rxq_ctrl->flow_vxlan_n++;
+			if (!rxq_ctrl->flow_vxlan_n)
+				rxq_ctrl->rxq.tunnel = 0;
+		}
 	}
 }
 
 /**
- * Clear the mark bit in all Rx queues.
+ * Clear the Mark/Flag and Tunnel ptype information in all Rx queues.
  *
  * @param dev
  *   Pointer to Ethernet device.
  */
 static void
-mlx5_flow_rxq_mark_clear(struct rte_eth_dev *dev)
+mlx5_flow_rxq_flags_clear(struct rte_eth_dev *dev)
 {
 	struct priv *priv = dev->data->dev_private;
 	unsigned int i;
@@ -1910,6 +2037,8 @@ mlx5_flow_rxq_mark_clear(struct rte_eth_dev *dev)
 					struct mlx5_rxq_ctrl, rxq);
 		rxq_ctrl->flow_mark_n = 0;
 		rxq_ctrl->rxq.mark = 0;
+		rxq_ctrl->flow_vxlan_n = 0;
+		rxq_ctrl->rxq.tunnel = 0;
 		++idx;
 	}
 }
@@ -2105,7 +2234,7 @@ mlx5_flow_list_create(struct rte_eth_dev *dev,
 		}
 	}
 	TAILQ_INSERT_TAIL(list, flow, next);
-	mlx5_flow_rxq_mark_set(dev, flow);
+	mlx5_flow_rxq_flags_set(dev, flow);
 	return flow;
 }
 
@@ -2143,7 +2272,12 @@ mlx5_flow_list_destroy(struct rte_eth_dev *dev, struct mlx5_flows *list,
 {
 	mlx5_flow_remove(dev, flow);
 	TAILQ_REMOVE(list, flow, next);
-	mlx5_flow_rxq_mark_trim(dev, flow);
+	/*
+	 * Update RX queue flags only if port is started, otherwise it is
+	 * already clean.
+	 */
+	if (dev->data->dev_started)
+		mlx5_flow_rxq_flags_trim(dev, flow);
 	rte_free(flow);
 }
 
@@ -2181,7 +2315,7 @@ mlx5_flow_stop(struct rte_eth_dev *dev, struct mlx5_flows *list)
 
 	TAILQ_FOREACH_REVERSE(flow, list, mlx5_flows, next)
 		mlx5_flow_remove(dev, flow);
-	mlx5_flow_rxq_mark_clear(dev);
+	mlx5_flow_rxq_flags_clear(dev);
 }
 
 /**
@@ -2206,7 +2340,7 @@ mlx5_flow_start(struct rte_eth_dev *dev, struct mlx5_flows *list)
 		ret = mlx5_flow_apply(dev, flow, &error);
 		if (ret < 0)
 			goto error;
-		mlx5_flow_rxq_mark_set(dev, flow);
+		mlx5_flow_rxq_flags_set(dev, flow);
 	}
 	return 0;
 error:
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index 808118e50..ae9b564dd 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -139,6 +139,7 @@ struct mlx5_rxq_ctrl {
 	unsigned int irq:1; /* Whether IRQ is enabled. */
 	uint16_t idx; /* Queue index. */
 	uint32_t flow_mark_n; /* Number of Mark/Flag flows using this Queue. */
+	uint32_t flow_vxlan_n; /* Number of VXLAN flows using this queue. */
 };
 
 /* Indirection table. */
-- 
2.18.0

  parent reply	other threads:[~2018-07-12  9:31 UTC|newest]

Thread overview: 118+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-28 11:21 [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 01/12] net/mlx5: remove flow support Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 02/12] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 03/12] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 04/12] net/mlx5: add flow queue action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 05/12] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 06/12] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 07/12] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 08/12] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 09/12] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 10/12] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 11/12] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-05-28 11:21 ` [dpdk-dev] [DPDK 18.08 v1 12/12] net/mlx5: add RSS " Nelio Laranjeiro
2018-05-28 13:32 ` [dpdk-dev] [DPDK 18.08 v1 00/12] net/mlx5: flow rework Wiles, Keith
2018-05-28 13:47   ` Ferruh Yigit
2018-05-28 13:50   ` Nélio Laranjeiro
2018-06-27 15:07 ` [dpdk-dev] [PATCH v2 00/20] " Nelio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 01/20] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-02 21:53     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 02/20] net/mlx5: handle drop queues are regular queues Nelio Laranjeiro
2018-07-03  1:07     ` Yongseok Koh
2018-07-03  7:17       ` Nélio Laranjeiro
2018-07-03 17:05         ` Yongseok Koh
2018-07-04  6:44           ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 03/20] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-03  1:40     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 04/20] net/mlx5: support flow Ethernet item among with drop action Nelio Laranjeiro
2018-07-03 22:27     ` Yongseok Koh
2018-07-04  9:24       ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 05/20] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-03 23:00     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 06/20] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-03 23:08     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 07/20] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-03 23:56     ` Yongseok Koh
2018-07-04 12:03       ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 08/20] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-04  0:12     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 09/20] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-04  0:16     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 10/20] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-04  0:17     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 11/20] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-04  0:18     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 12/20] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-04  8:34     ` Yongseok Koh
2018-07-05  8:47       ` Nélio Laranjeiro
2018-07-05 19:56         ` Yongseok Koh
2018-07-06  8:23           ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 13/20] net/mlx5: add RSS " Nelio Laranjeiro
2018-07-06  2:16     ` Yongseok Koh
2018-07-06 15:59       ` Nélio Laranjeiro
2018-07-06 17:35         ` Yongseok Koh
2018-07-09 13:09           ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 14/20] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-06  2:18     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 15/20] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-06  8:16     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 16/20] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-06 23:14     ` Yongseok Koh
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 17/20] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-06 23:23     ` Yongseok Koh
2018-07-09 14:53       ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 18/20] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-06 23:46     ` Yongseok Koh
2018-07-09 13:58       ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 19/20] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-07  0:11     ` Yongseok Koh
2018-07-09 15:00       ` Nélio Laranjeiro
2018-06-27 15:07   ` [dpdk-dev] [PATCH v2 20/20] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-07  1:08     ` Yongseok Koh
2018-07-11  7:22   ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-11 19:57       ` Yongseok Koh
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 17/21] net/mlx5: add flow VXLAN item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-11  7:22     ` [dpdk-dev] [PATCH v3 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-11 20:00     ` [dpdk-dev] [PATCH v3 00/21] net/mlx5: flow rework Yongseok Koh
2018-07-12  9:30     ` [dpdk-dev] [PATCH v4 " Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 01/21] net/mlx5: remove flow support Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 02/21] net/mlx5: handle drop queues as regular queues Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 03/21] net/mlx5: replace verbs priorities by flow Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 04/21] net/mlx5: support flow Ethernet item along with drop action Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 05/21] net/mlx5: add flow queue action Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 06/21] net/mlx5: add flow stop/start Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 07/21] net/mlx5: add flow VLAN item Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 08/21] net/mlx5: add flow IPv4 item Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 09/21] net/mlx5: add flow IPv6 item Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 10/21] net/mlx5: add flow UDP item Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 11/21] net/mlx5: add flow TCP item Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 12/21] net/mlx5: add mark/flag flow action Nelio Laranjeiro
2018-07-12  9:30       ` [dpdk-dev] [PATCH v4 13/21] net/mlx5: use a macro for the RSS key size Nelio Laranjeiro
2018-07-12  9:31       ` [dpdk-dev] [PATCH v4 14/21] net/mlx5: add RSS flow action Nelio Laranjeiro
2018-07-12  9:31       ` [dpdk-dev] [PATCH v4 15/21] net/mlx5: remove useless arguments in hrxq API Nelio Laranjeiro
2018-07-12  9:31       ` [dpdk-dev] [PATCH v4 16/21] net/mlx5: support inner RSS computation Nelio Laranjeiro
2018-07-12  9:31       ` Nelio Laranjeiro [this message]
2018-07-12  9:31       ` [dpdk-dev] [PATCH v4 18/21] net/mlx5: add flow VXLAN-GPE item Nelio Laranjeiro
2018-07-12  9:31       ` [dpdk-dev] [PATCH v4 19/21] net/mlx5: add flow GRE item Nelio Laranjeiro
2018-07-12  9:31       ` [dpdk-dev] [PATCH v4 20/21] net/mlx5: add flow MPLS item Nelio Laranjeiro
2018-07-12  9:31       ` [dpdk-dev] [PATCH v4 21/21] net/mlx5: add count flow action Nelio Laranjeiro
2018-07-12 10:44       ` [dpdk-dev] [PATCH v4 00/21] net/mlx5: flow rework Shahaf Shuler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41aa019d60a28ab271c465e86579e232a2471060.1531387413.git.nelio.laranjeiro@6wind.com \
    --to=nelio.laranjeiro@6wind.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=yskoh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).