From: Ke Xu <ke1.xu@intel.com>
To: dts@dpdk.org
Cc: lijuan.tu@intel.com, jin.ling@intel.com, zhiminx.huang@intel.com,
weiyuanx.li@intel.com, qi.fu@intel.com, Ke Xu <ke1.xu@intel.com>
Subject: [DTS][PATCH V1 07/21] test_plans/ice_qinq: update test plan to support represented port action from deprecated vf action
Date: Wed, 28 Sep 2022 03:18:31 +0000 [thread overview]
Message-ID: <20220928031836.770004-8-ke1.xu@intel.com> (raw)
In-Reply-To: <20220928031836.770004-1-ke1.xu@intel.com>
Signed-off-by: Ke Xu <ke1.xu@intel.com>
---
test_plans/ice_qinq_test_plan.rst | 104 +++++++++++++++---------------
1 file changed, 52 insertions(+), 52 deletions(-)
diff --git a/test_plans/ice_qinq_test_plan.rst b/test_plans/ice_qinq_test_plan.rst
index 37396f41..7c157575 100644
--- a/test_plans/ice_qinq_test_plan.rst
+++ b/test_plans/ice_qinq_test_plan.rst
@@ -80,7 +80,7 @@ Prerequisites
12. For test cases for DCF switch filter(01-06), use below cmd to launch testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf -a 0000:18:01.1 -a 0000:18:01.2 -a 0000:18:01.3 -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:18:01.0,cap=dcf,representor=[1] -a 0000:18:01.1 -a 0000:18:01.2 -a 0000:18:01.3 -- -i
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
@@ -139,7 +139,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv4 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -170,7 +170,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -201,7 +201,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -235,7 +235,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / ipv6 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -266,7 +266,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -297,7 +297,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -330,7 +330,7 @@ Test case 03: DCF switch for MAC_QINQ_PPPOE_PAY
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -368,7 +368,7 @@ Test case 04: DCF switch for MAC_QINQ_PPPOE_PAY_Proto
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / pppoe_proto_id is 0x0057 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -403,7 +403,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -435,7 +435,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 src is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -467,7 +467,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv4 dst is 196.222.232.221 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -502,7 +502,7 @@ subcase: dest mac
-----------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -534,7 +534,7 @@ subcase: src ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 src is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -566,7 +566,7 @@ subcase: dst ip
---------------
1. create a rule::
- testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth / vlan tci is 2 / vlan tci is 1 / pppoes seid is 1 / ipv6 dst is 1111:2222:3333:4444:5555:6666:7777:8888 / end actions represented_port ethdev_port_id1 / end
testpmd> flow list 0
check the rule exists in the list.
@@ -1577,7 +1577,7 @@ Common Steps
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf -a 0000:3b:01.1" for this test plan.
+ For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf,representor=[1] -a 0000:3b:01.1" for this test plan.
2. Set verbose::
@@ -1622,7 +1622,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1630,7 +1630,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1643,7 +1643,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV4 => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1651,11 +1651,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=A4:BF:01:4D:6F:32 - dst=00:11:22:33:44:55 - type=0x8100 - length=122 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1680,7 +1680,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test Case 2: MAC_QINQ_IPV6
--------------------------
@@ -1690,7 +1690,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1698,7 +1698,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1711,7 +1711,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV6 => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1719,11 +1719,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1748,7 +1748,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test Case 3: MAC_QINQ_IPV4_UDP
------------------------------
@@ -1758,7 +1758,7 @@ Test steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1766,7 +1766,7 @@ Test steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1779,7 +1779,7 @@ Test steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV4 UDP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1787,11 +1787,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=130 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=8 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1816,7 +1816,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test Case 4: MAC_QINQ_IPV4_TCP
------------------------------
@@ -1826,7 +1826,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1834,7 +1834,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv4 / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1847,7 +1847,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV4 TCP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1855,11 +1855,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=142 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV4 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=20 - inner_l4_len=20 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1884,7 +1884,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
#Pipeline mode
@@ -1896,7 +1896,7 @@ Test Steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1904,7 +1904,7 @@ Test Steps
2. Create a rule and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / udp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1917,7 +1917,7 @@ Test Steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV6 UDP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1925,11 +1925,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=150 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_UDP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_UDP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=8 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -1954,7 +1954,7 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
Test case 6: MAC_QINQ_IPV6_TCP
------------------------------
@@ -1964,7 +1964,7 @@ Test steps
~~~~~~~~~~
1. Validate a rule::
- testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1972,7 +1972,7 @@ Test steps
2. Create a rule and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth dst is <dst mac> / vlan tci is <outer vlan tci> / vlan tci is <inner vlan tci> / ipv6 dst is <ipv6 dst> / tcp src is <sport> dst is <dport> / end actions represented_port ethdev_port_id1 / end
Get the message::
@@ -1985,7 +1985,7 @@ Test steps
ID Group Prio Attr Rule
0 0 0 i-- ETH VLAN VLAN IPV6 TCP => VF
-3. Send matched packet in scapy on tester, check the port 1 of DUT received this packet.
+3. Send matched packet in scapy on tester, check the port 2 of DUT received this packet.
Tester::
@@ -1993,11 +1993,11 @@ Tester::
DUT::
- testpmd> port 1/queue 0: received 1 packets
+ testpmd> port 2/queue 0: received 1 packets
src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x8100 - length=162 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV6_EXT_UNKNOWN L4_TCP - sw ptype: L2_ETHER_VLAN INNER_L2_ETHER_VLAN INNER_L3_IPV6 INNER_L4_TCP - l2_len=18 - inner_l2_len=4 - inner_l3_len=40 - inner_l4_len=20 - Receive queue=0x0
ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
-4. Send mismatched packet in scapy on tester, check the port 1 of DUT could not receive this packet.
+4. Send mismatched packet in scapy on tester, check the port 2 of DUT could not receive this packet.
Tester::
@@ -2022,6 +2022,6 @@ Tester::
testpmd> flow list 0
Check the rule not exists in the list.
- Send matched packets in step 3, check the packets are not to port 1.
+ Send matched packets in step 3, check the packets are not to port 2.
--
2.25.1
next prev parent reply other threads:[~2022-09-28 3:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 3:18 [DTS][PATCH V1 00/21] update test plans and tests to support represented port action and port representor action from deprecated vf action on DCF cases Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 01/21] test_plans/dcf_lifecycle: update test plan to support represented port action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 02/21] test_plans/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 03/21] test_plans/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 04/21] test_plans/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 05/21] test_plans/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 06/21] test_plans/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` Ke Xu [this message]
2022-09-28 3:18 ` [DTS][PATCH V1 08/21] test_plans/ice_dcf_acl_filter: remove redundant white space Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 09/21] test_plans/dcf_lifecycle: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 10/21] test_plans/ice_dcf_data_path: update test plan to support port representor action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 11/21] tests/dcf_lifecycle: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 12/21] tests/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 13/21] tests/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 14/21] tests/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 15/21] tests/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 16/21] tests/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 17/21] tests/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 18/21] tests/ice_dcf_data_path: update test plan to support port representor " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 19/21] test_plans/ice_dcf_switch_filter: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 20/21] test/ice_dcf_switch_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 21/21] test_plans/ice_dcf_switch_filter: add white space to formate the table Ke Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928031836.770004-8-ke1.xu@intel.com \
--to=ke1.xu@intel.com \
--cc=dts@dpdk.org \
--cc=jin.ling@intel.com \
--cc=lijuan.tu@intel.com \
--cc=qi.fu@intel.com \
--cc=weiyuanx.li@intel.com \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).