patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Jie Wang <jie1x.wang@intel.com>
To: dev@dpdk.org
Cc: xiaoyun.li@intel.com, andrew.rybchenko@oktetlabs.ru,
	thomas@monjalon.net, ferruh.yigit@intel.com,
	Jie Wang <jie1x.wang@intel.com>,
	stable@dpdk.org
Subject: [dpdk-stable] [PATCH v6 2/2] app/testpmd: fix testpmd doesn't show RSS hash offload
Date: Tue, 24 Aug 2021 18:19:29 +0000	[thread overview]
Message-ID: <20210824181929.142691-3-jie1x.wang@intel.com> (raw)
In-Reply-To: <20210824181929.142691-1-jie1x.wang@intel.com>

The driver may change offloads info into dev->data->dev_conf
in dev_configure which may cause port->dev_conf and port->rx_conf
contain outdated values.

This patch updates the offloads info if it changes to fix this issue.

Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org

Signed-off-by: Jie Wang <jie1x.wang@intel.com>
---
 app/test-pmd/testpmd.c | 33 +++++++++++++++++++++++++++++++++
 app/test-pmd/testpmd.h |  2 ++
 app/test-pmd/util.c    | 15 +++++++++++++++
 3 files changed, 50 insertions(+)

diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 6cbe9ba3c8..9a78805673 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -2461,6 +2461,9 @@ start_port(portid_t pid)
 		}
 
 		if (port->need_reconfig > 0) {
+			struct rte_eth_dev_conf_info dev_conf_info;
+			int k;
+
 			port->need_reconfig = 0;
 
 			if (flow_isolate_all) {
@@ -2498,6 +2501,36 @@ start_port(portid_t pid)
 				port->need_reconfig = 1;
 				return -1;
 			}
+			/* get offloads */
+			if (0 !=
+				eth_dev_conf_info_get_print_err(pi,
+							&dev_conf_info)) {
+				rte_exit(EXIT_FAILURE,
+				    "rte_eth_dev_conf_info_get() failed\n");
+				return -1;
+			}
+			/* Apply Rx offloads configuration */
+			if (dev_conf_info.rx_offloads !=
+				port->dev_conf.rxmode.offloads) {
+				port->dev_conf.rxmode.offloads =
+					dev_conf_info.rx_offloads;
+				for (k = 0;
+				     k < port->dev_info.max_rx_queues;
+				     k++)
+					port->rx_conf[k].offloads =
+						dev_conf_info.rx_offloads;
+			}
+			/* Apply Tx offloads configuration */
+			if (dev_conf_info.tx_offloads !=
+				port->dev_conf.txmode.offloads) {
+				port->dev_conf.txmode.offloads =
+					dev_conf_info.tx_offloads;
+				for (k = 0;
+				     k < port->dev_info.max_tx_queues;
+				     k++)
+					port->tx_conf[k].offloads =
+						dev_conf_info.tx_offloads;
+			}
 		}
 		if (port->need_reconfig_queues > 0) {
 			port->need_reconfig_queues = 0;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 16a3598e48..4cf69a17a3 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -950,6 +950,8 @@ void show_gro(portid_t port_id);
 void setup_gso(const char *mode, portid_t port_id);
 int eth_dev_info_get_print_err(uint16_t port_id,
 			struct rte_eth_dev_info *dev_info);
+int eth_dev_conf_info_get_print_err(uint16_t port_id,
+			struct rte_eth_dev_conf_info *dev_info);
 void eth_set_promisc_mode(uint16_t port_id, int enable);
 void eth_set_allmulticast_mode(uint16_t port, int enable);
 int eth_link_get_nowait_print_err(uint16_t port_id, struct rte_eth_link *link);
diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c
index 5dd7157947..c6992fba7a 100644
--- a/app/test-pmd/util.c
+++ b/app/test-pmd/util.c
@@ -440,6 +440,21 @@ eth_dev_info_get_print_err(uint16_t port_id,
 	return ret;
 }
 
+int
+eth_dev_conf_info_get_print_err(uint16_t port_id,
+				struct rte_eth_dev_conf_info *dev_conf_info)
+{
+	int ret;
+
+	ret = rte_eth_dev_conf_info_get(port_id, dev_conf_info);
+	if (ret != 0)
+		fprintf(stderr,
+			"Error during getting device config (port %u) info: %s\n",
+			port_id, strerror(-ret));
+
+	return ret;
+}
+
 void
 eth_set_promisc_mode(uint16_t port, int enable)
 {
-- 
2.25.1


      parent reply	other threads:[~2021-08-24 10:20 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-09 15:57 [dpdk-stable] [PATCH] " Jie Wang
2021-07-09  9:27 ` [dpdk-stable] [dpdk-dev] " Andrew Rybchenko
2021-07-12  3:12   ` Li, Xiaoyun
     [not found]     ` <DM8PR11MB5639B19DACFB1B4F4E70ACA4D1149@DM8PR11MB5639.namprd11.prod.outlook.com>
2021-07-13  3:30       ` Li, Xiaoyun
2021-07-16  9:09     ` Ferruh Yigit
2021-07-13 17:04 ` [dpdk-stable] [PATCH v2] " Jie Wang
2021-07-15  2:29   ` Li, Xiaoyun
2021-07-15  2:40     ` Li, Xiaoyun
2021-07-15 11:33   ` [dpdk-stable] [PATCH v3] " Jie Wang
2021-07-15 11:57     ` [dpdk-stable] [PATCH v4] " Jie Wang
2021-07-15  4:53       ` Li, Xiaoyun
2021-07-16  8:30         ` Li, Xiaoyun
2021-07-16  8:52           ` Ferruh Yigit
     [not found]             ` <DM8PR11MB5639C757A790F65CBFB647C2D1E19@DM8PR11MB5639.namprd11.prod.outlook.com>
2021-07-19 16:18               ` Ferruh Yigit
2021-07-22 11:03                 ` Andrew Rybchenko
2021-08-09  8:53                   ` Ferruh Yigit
2021-08-17 17:38       ` [dpdk-stable] [PATCH v5] " Jie Wang
     [not found]         ` <20210824171049.138208-1-jie1x.wang@intel.com>
2021-08-24 17:10           ` [dpdk-stable] [PATCH v6 2/2] " Jie Wang
     [not found]         ` <20210824181929.142691-1-jie1x.wang@intel.com>
2021-08-24 18:19           ` Jie Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210824181929.142691-3-jie1x.wang@intel.com \
    --to=jie1x.wang@intel.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=stable@dpdk.org \
    --cc=thomas@monjalon.net \
    --cc=xiaoyun.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).