* [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs
@ 2019-10-30 8:42 Dekel Peled
2019-10-30 9:00 ` Slava Ovsiienko
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Dekel Peled @ 2019-10-30 8:42 UTC (permalink / raw)
To: matan, viacheslavo, shahafs; +Cc: orika, dev
DRV_LOG macro is used to print log messages, one per line.
In several locations this macro is used with redundant '\n' character
at the end of the log message, causing blank lines between log lines.
This patch removes the '\n' character where it is redundant.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
---
drivers/net/mlx5/mlx5.c | 14 +++++++-------
drivers/net/mlx5/mlx5_devx_cmds.c | 8 ++++----
drivers/net/mlx5/mlx5_flow.c | 8 ++++----
drivers/net/mlx5/mlx5_rxtx.c | 20 +++++++++-----------
4 files changed, 24 insertions(+), 26 deletions(-)
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 6e48d43..73b4ae3 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -819,7 +819,7 @@ struct mlx5_flow_id_pool *
SOCKET_ID_ANY, 0);
if (mz == NULL) {
DRV_LOG(ERR,
- "Cannot allocate mlx5 shared data\n");
+ "Cannot allocate mlx5 shared data");
ret = -rte_errno;
goto error;
}
@@ -831,7 +831,7 @@ struct mlx5_flow_id_pool *
mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
if (mz == NULL) {
DRV_LOG(ERR,
- "Cannot attach mlx5 shared data\n");
+ "Cannot attach mlx5 shared data");
ret = -rte_errno;
goto error;
}
@@ -2019,7 +2019,7 @@ struct mlx5_flow_id_pool *
MLX5DV_DEVX_PORT_MATCH_REG_C_0;
err = mlx5_glue->devx_port_query(sh->ctx, spawn->ibv_port, &devx_port);
if (err) {
- DRV_LOG(WARNING, "can't query devx port %d on device %s\n",
+ DRV_LOG(WARNING, "can't query devx port %d on device %s",
spawn->ibv_port, spawn->ibv_dev->name);
devx_port.comp_mask = 0;
}
@@ -2028,14 +2028,14 @@ struct mlx5_flow_id_pool *
priv->vport_meta_mask = devx_port.reg_c_0.mask;
if (!priv->vport_meta_mask) {
DRV_LOG(ERR, "vport zero mask for port %d"
- " on bonding device %s\n",
+ " on bonding device %s",
spawn->ibv_port, spawn->ibv_dev->name);
err = ENOTSUP;
goto error;
}
if (priv->vport_meta_tag & ~priv->vport_meta_mask) {
DRV_LOG(ERR, "invalid vport tag for port %d"
- " on bonding device %s\n",
+ " on bonding device %s",
spawn->ibv_port, spawn->ibv_dev->name);
err = ENOTSUP;
goto error;
@@ -2044,7 +2044,7 @@ struct mlx5_flow_id_pool *
priv->vport_id = devx_port.vport_num;
} else if (spawn->pf_bond >= 0) {
DRV_LOG(ERR, "can't deduce vport index for port %d"
- " on bonding device %s\n",
+ " on bonding device %s",
spawn->ibv_port, spawn->ibv_dev->name);
err = ENOTSUP;
goto error;
@@ -2191,7 +2191,7 @@ struct mlx5_flow_id_pool *
priv->counter_fallback = 1;
#endif
if (priv->counter_fallback)
- DRV_LOG(INFO, "Use fall-back DV counter management\n");
+ DRV_LOG(INFO, "Use fall-back DV counter management");
/* Check for LRO support. */
if (config.dest_tir && config.hca_attr.lro_cap &&
config.dv_flow_en) {
diff --git a/drivers/net/mlx5/mlx5_devx_cmds.c b/drivers/net/mlx5/mlx5_devx_cmds.c
index 3471a9b..d6e89b6 100644
--- a/drivers/net/mlx5/mlx5_devx_cmds.c
+++ b/drivers/net/mlx5/mlx5_devx_cmds.c
@@ -40,7 +40,7 @@ struct mlx5_devx_obj *
dcs->obj = mlx5_glue->devx_obj_create(ctx, in,
sizeof(in), out, sizeof(out));
if (!dcs->obj) {
- DRV_LOG(ERR, "Can't allocate counters - error %d\n", errno);
+ DRV_LOG(ERR, "Can't allocate counters - error %d", errno);
rte_errno = errno;
rte_free(dcs);
return NULL;
@@ -111,7 +111,7 @@ struct mlx5_devx_obj *
out_len, async_id,
cmd_comp);
if (rc) {
- DRV_LOG(ERR, "Failed to query devx counters with rc %d\n ", rc);
+ DRV_LOG(ERR, "Failed to query devx counters with rc %d", rc);
rte_errno = rc;
return -rc;
}
@@ -171,7 +171,7 @@ struct mlx5_devx_obj *
mkey->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
sizeof(out));
if (!mkey->obj) {
- DRV_LOG(ERR, "Can't create mkey - error %d\n", errno);
+ DRV_LOG(ERR, "Can't create mkey - error %d", errno);
rte_errno = errno;
rte_free(mkey);
return NULL;
@@ -202,7 +202,7 @@ struct mlx5_devx_obj *
if (status) {
int syndrome = MLX5_GET(query_flow_counter_out, out, syndrome);
- DRV_LOG(ERR, "Bad devX status %x, syndrome = %x\n", status,
+ DRV_LOG(ERR, "Bad devX status %x, syndrome = %x", status,
syndrome);
}
return status;
diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 5f01f9c..b4b08f4 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -3136,7 +3136,7 @@ struct rte_flow *
if (!flow) {
DRV_LOG(DEBUG,
"Failed to create ctrl flow: rte_errno(%d),"
- " type(%d), message(%s)\n",
+ " type(%d), message(%s)",
rte_errno, error.type,
error.message ? error.message : " (no stated reason)");
return -rte_errno;
@@ -3856,10 +3856,10 @@ struct rte_flow *
cont = MLX5_CNT_CONTAINER(sh, 1, 0);
pools_n += rte_atomic16_read(&cont->n_valid);
us = MLX5_POOL_QUERY_FREQ_US / pools_n;
- DRV_LOG(DEBUG, "Set alarm for %u pools each %u us\n", pools_n, us);
+ DRV_LOG(DEBUG, "Set alarm for %u pools each %u us", pools_n, us);
if (rte_eal_alarm_set(us, mlx5_flow_query_alarm, sh)) {
sh->cmng.query_thread_on = 0;
- DRV_LOG(ERR, "Cannot reinitialize query alarm\n");
+ DRV_LOG(ERR, "Cannot reinitialize query alarm");
} else {
sh->cmng.query_thread_on = 1;
}
@@ -3931,7 +3931,7 @@ struct rte_flow *
(uint64_t)(uintptr_t)pool);
if (ret) {
DRV_LOG(ERR, "Failed to trigger asynchronous query for dcs ID"
- " %d\n", pool->min_dcs->id);
+ " %d", pool->min_dcs->id);
pool->raw_hw = NULL;
goto set_alarm;
}
diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index f597c89..7f99f22 100644
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -583,18 +583,16 @@ enum mlx5_txcmp_code {
MKSTR(path, "%s/%s", MLX5_SYSTEM_LOG_DIR, fname);
fd = fopen(path, "a+");
if (!fd) {
- DRV_LOG(WARNING, "cannot open %s for debug dump\n",
- path);
+ DRV_LOG(WARNING, "cannot open %s for debug dump", path);
MKSTR(path2, "./%s", fname);
fd = fopen(path2, "a+");
if (!fd) {
- DRV_LOG(ERR, "cannot open %s for debug dump\n",
- path2);
+ DRV_LOG(ERR, "cannot open %s for debug dump", path2);
return;
}
- DRV_LOG(INFO, "New debug dump in file %s\n", path2);
+ DRV_LOG(INFO, "New debug dump in file %s", path2);
} else {
- DRV_LOG(INFO, "New debug dump in file %s\n", path);
+ DRV_LOG(INFO, "New debug dump in file %s", path);
}
if (hex_title)
rte_hexdump(fd, hex_title, buf, hex_len);
@@ -850,7 +848,7 @@ enum mlx5_txcmp_code {
&rq_attr);
}
if (ret) {
- DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s\n",
+ DRV_LOG(ERR, "Cannot change Rx WQ state to %u - %s",
sm->state, strerror(errno));
rte_errno = errno;
return ret;
@@ -868,7 +866,7 @@ enum mlx5_txcmp_code {
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
DRV_LOG(ERR, "Cannot change the Tx QP state to RESET "
- "%s\n", strerror(errno));
+ "%s", strerror(errno));
rte_errno = errno;
return ret;
}
@@ -876,7 +874,7 @@ enum mlx5_txcmp_code {
ret = mlx5_glue->modify_qp(qp, &mod,
(IBV_QP_STATE | IBV_QP_PORT));
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to INIT %s",
strerror(errno));
rte_errno = errno;
return ret;
@@ -884,7 +882,7 @@ enum mlx5_txcmp_code {
mod.qp_state = IBV_QPS_RTR;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTR %s",
strerror(errno));
rte_errno = errno;
return ret;
@@ -892,7 +890,7 @@ enum mlx5_txcmp_code {
mod.qp_state = IBV_QPS_RTS;
ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
if (ret) {
- DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s\n",
+ DRV_LOG(ERR, "Cannot change Tx QP state to RTS %s",
strerror(errno));
rte_errno = errno;
return ret;
--
1.8.3.1
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs
2019-10-30 8:42 [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs Dekel Peled
@ 2019-10-30 9:00 ` Slava Ovsiienko
2019-10-30 9:03 ` David Marchand
2019-11-03 13:34 ` Raslan Darawsheh
2 siblings, 0 replies; 6+ messages in thread
From: Slava Ovsiienko @ 2019-10-30 9:00 UTC (permalink / raw)
To: Dekel Peled, Matan Azrad, Shahaf Shuler; +Cc: Ori Kam, dev
> -----Original Message-----
> From: Dekel Peled <dekelp@mellanox.com>
> Sent: Wednesday, October 30, 2019 10:42
> To: Matan Azrad <matan@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>; Shahaf Shuler <shahafs@mellanox.com>
> Cc: Ori Kam <orika@mellanox.com>; dev@dpdk.org
> Subject: [PATCH] net/mlx5: remove redundant new line char in logs
>
> DRV_LOG macro is used to print log messages, one per line.
> In several locations this macro is used with redundant '\n' character at the
> end of the log message, causing blank lines between log lines.
>
> This patch removes the '\n' character where it is redundant.
>
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
> ---
> drivers/net/mlx5/mlx5.c | 14 +++++++-------
> drivers/net/mlx5/mlx5_devx_cmds.c | 8 ++++----
> drivers/net/mlx5/mlx5_flow.c | 8 ++++----
> drivers/net/mlx5/mlx5_rxtx.c | 20 +++++++++-----------
> 4 files changed, 24 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index
> 6e48d43..73b4ae3 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -819,7 +819,7 @@ struct mlx5_flow_id_pool *
> SOCKET_ID_ANY, 0);
> if (mz == NULL) {
> DRV_LOG(ERR,
> - "Cannot allocate mlx5 shared
> data\n");
> + "Cannot allocate mlx5 shared data");
> ret = -rte_errno;
> goto error;
> }
> @@ -831,7 +831,7 @@ struct mlx5_flow_id_pool *
> mz =
> rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
> if (mz == NULL) {
> DRV_LOG(ERR,
> - "Cannot attach mlx5 shared data\n");
> + "Cannot attach mlx5 shared data");
> ret = -rte_errno;
> goto error;
> }
> @@ -2019,7 +2019,7 @@ struct mlx5_flow_id_pool *
> MLX5DV_DEVX_PORT_MATCH_REG_C_0;
> err = mlx5_glue->devx_port_query(sh->ctx, spawn->ibv_port,
> &devx_port);
> if (err) {
> - DRV_LOG(WARNING, "can't query devx port %d on device
> %s\n",
> + DRV_LOG(WARNING, "can't query devx port %d on device
> %s",
> spawn->ibv_port, spawn->ibv_dev->name);
> devx_port.comp_mask = 0;
> }
> @@ -2028,14 +2028,14 @@ struct mlx5_flow_id_pool *
> priv->vport_meta_mask = devx_port.reg_c_0.mask;
> if (!priv->vport_meta_mask) {
> DRV_LOG(ERR, "vport zero mask for port %d"
> - " on bonding device %s\n",
> + " on bonding device %s",
> spawn->ibv_port, spawn->ibv_dev-
> >name);
> err = ENOTSUP;
> goto error;
> }
> if (priv->vport_meta_tag & ~priv->vport_meta_mask) {
> DRV_LOG(ERR, "invalid vport tag for port %d"
> - " on bonding device %s\n",
> + " on bonding device %s",
> spawn->ibv_port, spawn->ibv_dev-
> >name);
> err = ENOTSUP;
> goto error;
> @@ -2044,7 +2044,7 @@ struct mlx5_flow_id_pool *
> priv->vport_id = devx_port.vport_num;
> } else if (spawn->pf_bond >= 0) {
> DRV_LOG(ERR, "can't deduce vport index for port %d"
> - " on bonding device %s\n",
> + " on bonding device %s",
> spawn->ibv_port, spawn->ibv_dev->name);
> err = ENOTSUP;
> goto error;
> @@ -2191,7 +2191,7 @@ struct mlx5_flow_id_pool *
> priv->counter_fallback = 1;
> #endif
> if (priv->counter_fallback)
> - DRV_LOG(INFO, "Use fall-back DV counter
> management\n");
> + DRV_LOG(INFO, "Use fall-back DV counter
> management");
> /* Check for LRO support. */
> if (config.dest_tir && config.hca_attr.lro_cap &&
> config.dv_flow_en) {
> diff --git a/drivers/net/mlx5/mlx5_devx_cmds.c
> b/drivers/net/mlx5/mlx5_devx_cmds.c
> index 3471a9b..d6e89b6 100644
> --- a/drivers/net/mlx5/mlx5_devx_cmds.c
> +++ b/drivers/net/mlx5/mlx5_devx_cmds.c
> @@ -40,7 +40,7 @@ struct mlx5_devx_obj *
> dcs->obj = mlx5_glue->devx_obj_create(ctx, in,
> sizeof(in), out, sizeof(out));
> if (!dcs->obj) {
> - DRV_LOG(ERR, "Can't allocate counters - error %d\n",
> errno);
> + DRV_LOG(ERR, "Can't allocate counters - error %d", errno);
> rte_errno = errno;
> rte_free(dcs);
> return NULL;
> @@ -111,7 +111,7 @@ struct mlx5_devx_obj *
> out_len, async_id,
> cmd_comp);
> if (rc) {
> - DRV_LOG(ERR, "Failed to query devx counters with rc %d\n ",
> rc);
> + DRV_LOG(ERR, "Failed to query devx counters with rc %d",
> rc);
> rte_errno = rc;
> return -rc;
> }
> @@ -171,7 +171,7 @@ struct mlx5_devx_obj *
> mkey->obj = mlx5_glue->devx_obj_create(ctx, in, sizeof(in), out,
> sizeof(out));
> if (!mkey->obj) {
> - DRV_LOG(ERR, "Can't create mkey - error %d\n", errno);
> + DRV_LOG(ERR, "Can't create mkey - error %d", errno);
> rte_errno = errno;
> rte_free(mkey);
> return NULL;
> @@ -202,7 +202,7 @@ struct mlx5_devx_obj *
> if (status) {
> int syndrome = MLX5_GET(query_flow_counter_out, out,
> syndrome);
>
> - DRV_LOG(ERR, "Bad devX status %x, syndrome = %x\n",
> status,
> + DRV_LOG(ERR, "Bad devX status %x, syndrome = %x", status,
> syndrome);
> }
> return status;
> diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
> index 5f01f9c..b4b08f4 100644
> --- a/drivers/net/mlx5/mlx5_flow.c
> +++ b/drivers/net/mlx5/mlx5_flow.c
> @@ -3136,7 +3136,7 @@ struct rte_flow *
> if (!flow) {
> DRV_LOG(DEBUG,
> "Failed to create ctrl flow: rte_errno(%d),"
> - " type(%d), message(%s)\n",
> + " type(%d), message(%s)",
> rte_errno, error.type,
> error.message ? error.message : " (no stated
> reason)");
> return -rte_errno;
> @@ -3856,10 +3856,10 @@ struct rte_flow *
> cont = MLX5_CNT_CONTAINER(sh, 1, 0);
> pools_n += rte_atomic16_read(&cont->n_valid);
> us = MLX5_POOL_QUERY_FREQ_US / pools_n;
> - DRV_LOG(DEBUG, "Set alarm for %u pools each %u us\n", pools_n,
> us);
> + DRV_LOG(DEBUG, "Set alarm for %u pools each %u us", pools_n, us);
> if (rte_eal_alarm_set(us, mlx5_flow_query_alarm, sh)) {
> sh->cmng.query_thread_on = 0;
> - DRV_LOG(ERR, "Cannot reinitialize query alarm\n");
> + DRV_LOG(ERR, "Cannot reinitialize query alarm");
> } else {
> sh->cmng.query_thread_on = 1;
> }
> @@ -3931,7 +3931,7 @@ struct rte_flow *
> (uint64_t)(uintptr_t)pool);
> if (ret) {
> DRV_LOG(ERR, "Failed to trigger asynchronous query for dcs
> ID"
> - " %d\n", pool->min_dcs->id);
> + " %d", pool->min_dcs->id);
> pool->raw_hw = NULL;
> goto set_alarm;
> }
> diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
> index f597c89..7f99f22 100644
> --- a/drivers/net/mlx5/mlx5_rxtx.c
> +++ b/drivers/net/mlx5/mlx5_rxtx.c
> @@ -583,18 +583,16 @@ enum mlx5_txcmp_code {
> MKSTR(path, "%s/%s", MLX5_SYSTEM_LOG_DIR, fname);
> fd = fopen(path, "a+");
> if (!fd) {
> - DRV_LOG(WARNING, "cannot open %s for debug dump\n",
> - path);
> + DRV_LOG(WARNING, "cannot open %s for debug dump",
> path);
> MKSTR(path2, "./%s", fname);
> fd = fopen(path2, "a+");
> if (!fd) {
> - DRV_LOG(ERR, "cannot open %s for debug dump\n",
> - path2);
> + DRV_LOG(ERR, "cannot open %s for debug dump",
> path2);
> return;
> }
> - DRV_LOG(INFO, "New debug dump in file %s\n", path2);
> + DRV_LOG(INFO, "New debug dump in file %s", path2);
> } else {
> - DRV_LOG(INFO, "New debug dump in file %s\n", path);
> + DRV_LOG(INFO, "New debug dump in file %s", path);
> }
> if (hex_title)
> rte_hexdump(fd, hex_title, buf, hex_len); @@ -850,7 +848,7
> @@ enum mlx5_txcmp_code {
> &rq_attr);
> }
> if (ret) {
> - DRV_LOG(ERR, "Cannot change Rx WQ state to %u -
> %s\n",
> + DRV_LOG(ERR, "Cannot change Rx WQ state to %u -
> %s",
> sm->state, strerror(errno));
> rte_errno = errno;
> return ret;
> @@ -868,7 +866,7 @@ enum mlx5_txcmp_code {
> ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
> if (ret) {
> DRV_LOG(ERR, "Cannot change the Tx QP state to
> RESET "
> - "%s\n", strerror(errno));
> + "%s", strerror(errno));
> rte_errno = errno;
> return ret;
> }
> @@ -876,7 +874,7 @@ enum mlx5_txcmp_code {
> ret = mlx5_glue->modify_qp(qp, &mod,
> (IBV_QP_STATE | IBV_QP_PORT));
> if (ret) {
> - DRV_LOG(ERR, "Cannot change Tx QP state to INIT
> %s\n",
> + DRV_LOG(ERR, "Cannot change Tx QP state to INIT
> %s",
> strerror(errno));
> rte_errno = errno;
> return ret;
> @@ -884,7 +882,7 @@ enum mlx5_txcmp_code {
> mod.qp_state = IBV_QPS_RTR;
> ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
> if (ret) {
> - DRV_LOG(ERR, "Cannot change Tx QP state to RTR
> %s\n",
> + DRV_LOG(ERR, "Cannot change Tx QP state to RTR
> %s",
> strerror(errno));
> rte_errno = errno;
> return ret;
> @@ -892,7 +890,7 @@ enum mlx5_txcmp_code {
> mod.qp_state = IBV_QPS_RTS;
> ret = mlx5_glue->modify_qp(qp, &mod, IBV_QP_STATE);
> if (ret) {
> - DRV_LOG(ERR, "Cannot change Tx QP state to RTS
> %s\n",
> + DRV_LOG(ERR, "Cannot change Tx QP state to RTS
> %s",
> strerror(errno));
> rte_errno = errno;
> return ret;
> --
> 1.8.3.1
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs
2019-10-30 8:42 [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs Dekel Peled
2019-10-30 9:00 ` Slava Ovsiienko
@ 2019-10-30 9:03 ` David Marchand
2019-10-30 9:40 ` Dekel Peled
2019-11-03 13:34 ` Raslan Darawsheh
2 siblings, 1 reply; 6+ messages in thread
From: David Marchand @ 2019-10-30 9:03 UTC (permalink / raw)
To: Dekel Peled
Cc: Matan Azrad, Viacheslav Ovsiienko, Shahaf Shuler, Ori Kam, dev
On Wed, Oct 30, 2019 at 9:45 AM Dekel Peled <dekelp@mellanox.com> wrote:
>
> DRV_LOG macro is used to print log messages, one per line.
> In several locations this macro is used with redundant '\n' character
> at the end of the log message, causing blank lines between log lines.
>
> This patch removes the '\n' character where it is redundant.
Missing Fixes: ?
--
David Marchand
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs
2019-10-30 9:03 ` David Marchand
@ 2019-10-30 9:40 ` Dekel Peled
2019-10-30 9:52 ` David Marchand
0 siblings, 1 reply; 6+ messages in thread
From: Dekel Peled @ 2019-10-30 9:40 UTC (permalink / raw)
To: David Marchand; +Cc: Matan Azrad, Slava Ovsiienko, Shahaf Shuler, Ori Kam, dev
Thanks, PSB.
> -----Original Message-----
> From: David Marchand <david.marchand@redhat.com>
> Sent: Wednesday, October 30, 2019 11:03 AM
> To: Dekel Peled <dekelp@mellanox.com>
> Cc: Matan Azrad <matan@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>; Shahaf Shuler <shahafs@mellanox.com>; Ori
> Kam <orika@mellanox.com>; dev <dev@dpdk.org>
> Subject: Re: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char
> in logs
>
> On Wed, Oct 30, 2019 at 9:45 AM Dekel Peled <dekelp@mellanox.com>
> wrote:
> >
> > DRV_LOG macro is used to print log messages, one per line.
> > In several locations this macro is used with redundant '\n' character
> > at the end of the log message, causing blank lines between log lines.
> >
> > This patch removes the '\n' character where it is redundant.
>
> Missing Fixes: ?
This patch is 'cosmetic', not functional.
It changes code of several patches, from previous releases and also from current release.
For these reasons I didn't send it as a fix, and without cc stable.
>
>
> --
> David Marchand
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs
2019-10-30 9:40 ` Dekel Peled
@ 2019-10-30 9:52 ` David Marchand
0 siblings, 0 replies; 6+ messages in thread
From: David Marchand @ 2019-10-30 9:52 UTC (permalink / raw)
To: Dekel Peled; +Cc: Matan Azrad, Slava Ovsiienko, Shahaf Shuler, Ori Kam, dev
On Wed, Oct 30, 2019 at 10:40 AM Dekel Peled <dekelp@mellanox.com> wrote:
> > -----Original Message-----
> > From: David Marchand <david.marchand@redhat.com>
> > Sent: Wednesday, October 30, 2019 11:03 AM
> > To: Dekel Peled <dekelp@mellanox.com>
> > Cc: Matan Azrad <matan@mellanox.com>; Slava Ovsiienko
> > <viacheslavo@mellanox.com>; Shahaf Shuler <shahafs@mellanox.com>; Ori
> > Kam <orika@mellanox.com>; dev <dev@dpdk.org>
> > Subject: Re: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char
> > in logs
> >
> > On Wed, Oct 30, 2019 at 9:45 AM Dekel Peled <dekelp@mellanox.com>
> > wrote:
> > >
> > > DRV_LOG macro is used to print log messages, one per line.
> > > In several locations this macro is used with redundant '\n' character
> > > at the end of the log message, causing blank lines between log lines.
> > >
> > > This patch removes the '\n' character where it is redundant.
> >
> > Missing Fixes: ?
>
> This patch is 'cosmetic', not functional.
Having empty lines as noise when debugging is a pain for my pov.
But this is your driver, so fair enough.
--
David Marchand
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs
2019-10-30 8:42 [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs Dekel Peled
2019-10-30 9:00 ` Slava Ovsiienko
2019-10-30 9:03 ` David Marchand
@ 2019-11-03 13:34 ` Raslan Darawsheh
2 siblings, 0 replies; 6+ messages in thread
From: Raslan Darawsheh @ 2019-11-03 13:34 UTC (permalink / raw)
To: Dekel Peled, Matan Azrad, Slava Ovsiienko, Shahaf Shuler; +Cc: Ori Kam, dev
Hi,
> -----Original Message-----
> From: dev <dev-bounces@dpdk.org> On Behalf Of Dekel Peled
> Sent: Wednesday, October 30, 2019 10:42 AM
> To: Matan Azrad <matan@mellanox.com>; Slava Ovsiienko
> <viacheslavo@mellanox.com>; Shahaf Shuler <shahafs@mellanox.com>
> Cc: Ori Kam <orika@mellanox.com>; dev@dpdk.org
> Subject: [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in
> logs
>
> DRV_LOG macro is used to print log messages, one per line.
> In several locations this macro is used with redundant '\n' character
> at the end of the log message, causing blank lines between log lines.
>
> This patch removes the '\n' character where it is redundant.
>
> Signed-off-by: Dekel Peled <dekelp@mellanox.com>
> ---
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-11-03 13:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-30 8:42 [dpdk-dev] [PATCH] net/mlx5: remove redundant new line char in logs Dekel Peled
2019-10-30 9:00 ` Slava Ovsiienko
2019-10-30 9:03 ` David Marchand
2019-10-30 9:40 ` Dekel Peled
2019-10-30 9:52 ` David Marchand
2019-11-03 13:34 ` Raslan Darawsheh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).