* Re: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
@ 2021-03-23 19:27 Akhil Goyal
2021-04-05 18:58 ` Akhil Goyal
0 siblings, 1 reply; 6+ messages in thread
From: Akhil Goyal @ 2021-03-23 19:27 UTC (permalink / raw)
To: Adam Dybkowski, dev, declan.doherty, arkadiuszx.kusztal
> This patch adds closing of the PMD after running the tests.
>
> Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
> ---
> app/test/test_cryptodev.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
> index f91debc16..ea965a64a 100644
> --- a/app/test/test_cryptodev.c
> +++ b/app/test/test_cryptodev.c
> @@ -928,6 +928,7 @@ ut_teardown(void)
> struct crypto_testsuite_params *ts_params = &testsuite_params;
> struct crypto_unittest_params *ut_params = &unittest_params;
> struct rte_cryptodev_stats stats;
> + int res;
>
> /* free crypto session structure */
> #ifdef RTE_LIB_SECURITY
> @@ -976,8 +977,11 @@ ut_teardown(void)
>
> rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats);
>
> - /* Stop the device */
> + /* Stop and close the device */
> rte_cryptodev_stop(ts_params->valid_devs[0]);
> + res = rte_cryptodev_close(ts_params->valid_devs[0]);
> + if (res)
> + RTE_LOG(ERR, USER1, "Crypto device close error %d\n", res);
Shouldn't this be part of testsuite_setup() instead of ut_teardown()?
In cases of vdev, devices are initialized as part of testsuite_setup().
Should we also call rte_cryptodev_queue_pair_release from ut_teardown?
Regards,
Akhil
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
2021-03-23 19:27 [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests Akhil Goyal
@ 2021-04-05 18:58 ` Akhil Goyal
2021-04-06 9:15 ` Dybkowski, AdamX
0 siblings, 1 reply; 6+ messages in thread
From: Akhil Goyal @ 2021-04-05 18:58 UTC (permalink / raw)
To: Akhil Goyal, Adam Dybkowski, dev, declan.doherty, arkadiuszx.kusztal
Hi Adam/Arek,
Could you please reply to the below query.
> > This patch adds closing of the PMD after running the tests.
> >
> > Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
> > ---
> > app/test/test_cryptodev.c | 6 +++++-
> > 1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
> > index f91debc16..ea965a64a 100644
> > --- a/app/test/test_cryptodev.c
> > +++ b/app/test/test_cryptodev.c
> > @@ -928,6 +928,7 @@ ut_teardown(void)
> > struct crypto_testsuite_params *ts_params = &testsuite_params;
> > struct crypto_unittest_params *ut_params = &unittest_params;
> > struct rte_cryptodev_stats stats;
> > + int res;
> >
> > /* free crypto session structure */
> > #ifdef RTE_LIB_SECURITY
> > @@ -976,8 +977,11 @@ ut_teardown(void)
> >
> > rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats);
> >
> > - /* Stop the device */
> > + /* Stop and close the device */
> > rte_cryptodev_stop(ts_params->valid_devs[0]);
> > + res = rte_cryptodev_close(ts_params->valid_devs[0]);
> > + if (res)
> > + RTE_LOG(ERR, USER1, "Crypto device close error %d\n", res);
>
> Shouldn't this be part of testsuite_setup() instead of ut_teardown()?
> In cases of vdev, devices are initialized as part of testsuite_setup().
>
> Should we also call rte_cryptodev_queue_pair_release from ut_teardown?
>
> Regards,
> Akhil
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
2021-04-05 18:58 ` Akhil Goyal
@ 2021-04-06 9:15 ` Dybkowski, AdamX
2021-04-08 12:15 ` Akhil Goyal
0 siblings, 1 reply; 6+ messages in thread
From: Dybkowski, AdamX @ 2021-04-06 9:15 UTC (permalink / raw)
To: Akhil Goyal, dev, Doherty, Declan, Kusztal, ArkadiuszX
The pmd is initialized in the setup function.
This patch adds one extra step inside the teardown function: the call to the rte_cryptodev_close apart of the call to rte_cryptodev_stop function that existed before.
I don't see any sense of calling the stop function inside the setup, in my opinion it's much better to do it during the teardown.
Adam
> -----Original Message-----
> From: Akhil Goyal <gakhil@marvell.com>
> Sent: Monday, 5 April, 2021 20:59
> To: Akhil Goyal <gakhil@marvell.com>; Dybkowski, AdamX
> <adamx.dybkowski@intel.com>; dev@dpdk.org; Doherty, Declan
> <declan.doherty@intel.com>; Kusztal, ArkadiuszX
> <arkadiuszx.kusztal@intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
>
> Hi Adam/Arek,
>
> Could you please reply to the below query.
>
> > > This patch adds closing of the PMD after running the tests.
> > >
> > > Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
> > > ---
> > > app/test/test_cryptodev.c | 6 +++++-
> > > 1 file changed, 5 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
> > > index f91debc16..ea965a64a 100644
> > > --- a/app/test/test_cryptodev.c
> > > +++ b/app/test/test_cryptodev.c
> > > @@ -928,6 +928,7 @@ ut_teardown(void)
> > > struct crypto_testsuite_params *ts_params = &testsuite_params;
> > > struct crypto_unittest_params *ut_params = &unittest_params;
> > > struct rte_cryptodev_stats stats;
> > > + int res;
> > >
> > > /* free crypto session structure */ #ifdef RTE_LIB_SECURITY @@
> > > -976,8 +977,11 @@ ut_teardown(void)
> > >
> > > rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats);
> > >
> > > - /* Stop the device */
> > > + /* Stop and close the device */
> > > rte_cryptodev_stop(ts_params->valid_devs[0]);
> > > + res = rte_cryptodev_close(ts_params->valid_devs[0]);
> > > + if (res)
> > > + RTE_LOG(ERR, USER1, "Crypto device close error %d\n",
> res);
> >
> > Shouldn't this be part of testsuite_setup() instead of ut_teardown()?
> > In cases of vdev, devices are initialized as part of testsuite_setup().
> >
> > Should we also call rte_cryptodev_queue_pair_release from
> ut_teardown?
> >
> > Regards,
> > Akhil
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
2021-04-06 9:15 ` Dybkowski, AdamX
@ 2021-04-08 12:15 ` Akhil Goyal
2021-04-09 8:56 ` Dybkowski, AdamX
0 siblings, 1 reply; 6+ messages in thread
From: Akhil Goyal @ 2021-04-08 12:15 UTC (permalink / raw)
To: Dybkowski, AdamX, dev, Doherty, Declan, Kusztal, ArkadiuszX
> The pmd is initialized in the setup function.
> This patch adds one extra step inside the teardown function: the call to the
> rte_cryptodev_close apart of the call to rte_cryptodev_stop function that
> existed before.
>
> I don't see any sense of calling the stop function inside the setup, in my
> opinion it's much better to do it during the teardown.
>
Sorry, I wanted to refer to testsuite_teardown() instead of ut_teardown().
The reason is that, vdevs are initialized in testsuite_setup and not ut_setup.
Hence corresponding reverse function should be in testsuite_teardown().
-akhil
>
> > -----Original Message-----
> > From: Akhil Goyal <gakhil@marvell.com>
> > Sent: Monday, 5 April, 2021 20:59
> > To: Akhil Goyal <gakhil@marvell.com>; Dybkowski, AdamX
> > <adamx.dybkowski@intel.com>; dev@dpdk.org; Doherty, Declan
> > <declan.doherty@intel.com>; Kusztal, ArkadiuszX
> > <arkadiuszx.kusztal@intel.com>
> > Subject: RE: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
> >
> > Hi Adam/Arek,
> >
> > Could you please reply to the below query.
> >
> > > > This patch adds closing of the PMD after running the tests.
> > > >
> > > > Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
> > > > ---
> > > > app/test/test_cryptodev.c | 6 +++++-
> > > > 1 file changed, 5 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
> > > > index f91debc16..ea965a64a 100644
> > > > --- a/app/test/test_cryptodev.c
> > > > +++ b/app/test/test_cryptodev.c
> > > > @@ -928,6 +928,7 @@ ut_teardown(void)
> > > > struct crypto_testsuite_params *ts_params = &testsuite_params;
> > > > struct crypto_unittest_params *ut_params = &unittest_params;
> > > > struct rte_cryptodev_stats stats;
> > > > + int res;
> > > >
> > > > /* free crypto session structure */ #ifdef RTE_LIB_SECURITY @@
> > > > -976,8 +977,11 @@ ut_teardown(void)
> > > >
> > > > rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats);
> > > >
> > > > - /* Stop the device */
> > > > + /* Stop and close the device */
> > > > rte_cryptodev_stop(ts_params->valid_devs[0]);
> > > > + res = rte_cryptodev_close(ts_params->valid_devs[0]);
> > > > + if (res)
> > > > + RTE_LOG(ERR, USER1, "Crypto device close error %d\n",
> > res);
> > >
> > > Shouldn't this be part of testsuite_setup() instead of ut_teardown()?
> > > In cases of vdev, devices are initialized as part of testsuite_setup().
> > >
> > > Should we also call rte_cryptodev_queue_pair_release from
> > ut_teardown?
> > >
> > > Regards,
> > > Akhil
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
2021-04-08 12:15 ` Akhil Goyal
@ 2021-04-09 8:56 ` Dybkowski, AdamX
0 siblings, 0 replies; 6+ messages in thread
From: Dybkowski, AdamX @ 2021-04-09 8:56 UTC (permalink / raw)
To: Akhil Goyal, dev, Doherty, Declan, Kusztal, ArkadiuszX
Thanks for spotting this.
I'll move the call to rte_cryptodev_close into the function testsuite_teardown and send v3.
Adam
> -----Original Message-----
> From: Akhil Goyal <gakhil@marvell.com>
> Sent: Thursday, 8 April, 2021 14:16
> To: Dybkowski, AdamX <adamx.dybkowski@intel.com>; dev@dpdk.org;
> Doherty, Declan <declan.doherty@intel.com>; Kusztal, ArkadiuszX
> <arkadiuszx.kusztal@intel.com>
> Subject: RE: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
>
> > The pmd is initialized in the setup function.
> > This patch adds one extra step inside the teardown function: the call
> > to the rte_cryptodev_close apart of the call to rte_cryptodev_stop
> > function that existed before.
> >
> > I don't see any sense of calling the stop function inside the setup,
> > in my opinion it's much better to do it during the teardown.
> >
>
> Sorry, I wanted to refer to testsuite_teardown() instead of ut_teardown().
> The reason is that, vdevs are initialized in testsuite_setup and not ut_setup.
> Hence corresponding reverse function should be in testsuite_teardown().
>
> -akhil
> >
> > > -----Original Message-----
> > > From: Akhil Goyal <gakhil@marvell.com>
> > > Sent: Monday, 5 April, 2021 20:59
> > > To: Akhil Goyal <gakhil@marvell.com>; Dybkowski, AdamX
> > > <adamx.dybkowski@intel.com>; dev@dpdk.org; Doherty, Declan
> > > <declan.doherty@intel.com>; Kusztal, ArkadiuszX
> > > <arkadiuszx.kusztal@intel.com>
> > > Subject: RE: [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after
> > > tests
> > >
> > > Hi Adam/Arek,
> > >
> > > Could you please reply to the below query.
> > >
> > > > > This patch adds closing of the PMD after running the tests.
> > > > >
> > > > > Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
> > > > > ---
> > > > > app/test/test_cryptodev.c | 6 +++++-
> > > > > 1 file changed, 5 insertions(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/app/test/test_cryptodev.c
> > > > > b/app/test/test_cryptodev.c index f91debc16..ea965a64a 100644
> > > > > --- a/app/test/test_cryptodev.c
> > > > > +++ b/app/test/test_cryptodev.c
> > > > > @@ -928,6 +928,7 @@ ut_teardown(void)
> > > > > struct crypto_testsuite_params *ts_params =
> &testsuite_params;
> > > > > struct crypto_unittest_params *ut_params =
> &unittest_params;
> > > > > struct rte_cryptodev_stats stats;
> > > > > + int res;
> > > > >
> > > > > /* free crypto session structure */ #ifdef RTE_LIB_SECURITY
> > > > > @@
> > > > > -976,8 +977,11 @@ ut_teardown(void)
> > > > >
> > > > > rte_cryptodev_stats_get(ts_params->valid_devs[0],
> &stats);
> > > > >
> > > > > - /* Stop the device */
> > > > > + /* Stop and close the device */
> > > > > rte_cryptodev_stop(ts_params->valid_devs[0]);
> > > > > + res = rte_cryptodev_close(ts_params->valid_devs[0]);
> > > > > + if (res)
> > > > > + RTE_LOG(ERR, USER1, "Crypto device close error
> %d\n",
> > > res);
> > > >
> > > > Shouldn't this be part of testsuite_setup() instead of ut_teardown()?
> > > > In cases of vdev, devices are initialized as part of testsuite_setup().
> > > >
> > > > Should we also call rte_cryptodev_queue_pair_release from
> > > ut_teardown?
> > > >
> > > > Regards,
> > > > Akhil
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests
2021-03-08 12:57 ` [dpdk-dev] [PATCH v2 0/2] " Adam Dybkowski
@ 2021-03-08 12:57 ` Adam Dybkowski
0 siblings, 0 replies; 6+ messages in thread
From: Adam Dybkowski @ 2021-03-08 12:57 UTC (permalink / raw)
To: dev, declan.doherty, arkadiuszx.kusztal; +Cc: Adam Dybkowski
This patch adds closing of the PMD after running the tests.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
---
app/test/test_cryptodev.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/app/test/test_cryptodev.c b/app/test/test_cryptodev.c
index f91debc16..ea965a64a 100644
--- a/app/test/test_cryptodev.c
+++ b/app/test/test_cryptodev.c
@@ -928,6 +928,7 @@ ut_teardown(void)
struct crypto_testsuite_params *ts_params = &testsuite_params;
struct crypto_unittest_params *ut_params = &unittest_params;
struct rte_cryptodev_stats stats;
+ int res;
/* free crypto session structure */
#ifdef RTE_LIB_SECURITY
@@ -976,8 +977,11 @@ ut_teardown(void)
rte_cryptodev_stats_get(ts_params->valid_devs[0], &stats);
- /* Stop the device */
+ /* Stop and close the device */
rte_cryptodev_stop(ts_params->valid_devs[0]);
+ res = rte_cryptodev_close(ts_params->valid_devs[0]);
+ if (res)
+ RTE_LOG(ERR, USER1, "Crypto device close error %d\n", res);
}
static int
--
2.25.1
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-04-09 8:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-23 19:27 [dpdk-dev] [PATCH v2 1/2] test/crypto: close PMD after tests Akhil Goyal
2021-04-05 18:58 ` Akhil Goyal
2021-04-06 9:15 ` Dybkowski, AdamX
2021-04-08 12:15 ` Akhil Goyal
2021-04-09 8:56 ` Dybkowski, AdamX
-- strict thread matches above, loose matches on Subject: below --
2021-03-01 12:21 [dpdk-dev] [PATCH " Adam Dybkowski
2021-03-08 12:57 ` [dpdk-dev] [PATCH v2 0/2] " Adam Dybkowski
2021-03-08 12:57 ` [dpdk-dev] [PATCH v2 1/2] " Adam Dybkowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).