* [dpdk-users] Problem in configuring rxmode.mq_mode @ 2020-07-16 12:11 Alireza Sanaee 2020-07-16 15:32 ` Raslan Darawsheh 0 siblings, 1 reply; 4+ messages in thread From: Alireza Sanaee @ 2020-07-16 12:11 UTC (permalink / raw) To: users Dear all, I'd like to configure my NIC to not use RSS, however, it seems NIC doesn't adhere to the configurations set in the code, and it just applies a default RSS config. Particularly, I turned the RSS config off using `.mq_mode = ETH_MQ_RX_NONE`, but my NIC still keeps landing different flows on different queues. I have got a Mellanox ConnectX-4 NIC. Thanks, Alireza ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-users] Problem in configuring rxmode.mq_mode 2020-07-16 12:11 [dpdk-users] Problem in configuring rxmode.mq_mode Alireza Sanaee @ 2020-07-16 15:32 ` Raslan Darawsheh 2020-07-16 18:55 ` Alireza Sanaee 0 siblings, 1 reply; 4+ messages in thread From: Raslan Darawsheh @ 2020-07-16 15:32 UTC (permalink / raw) To: Alireza Sanaee, users Hi Alireza, We had this issue in old releases, and it has been fixed by this patch: http://patches.dpdk.org/patch/69554/ can you check if it will solve your issue? Kindest regards, Raslan Darawsheh > -----Original Message----- > From: users <users-bounces@dpdk.org> On Behalf Of Alireza Sanaee > Sent: Thursday, July 16, 2020 3:11 PM > To: users@dpdk.org > Subject: [dpdk-users] Problem in configuring rxmode.mq_mode > > Dear all, > > I'd like to configure my NIC to not use RSS, however, it seems NIC > doesn't adhere to the configurations set in the code, and it just > applies a default RSS config. Particularly, I turned the RSS config off > using `.mq_mode = ETH_MQ_RX_NONE`, but my NIC still keeps landing > different flows on different queues. I have got a Mellanox ConnectX-4 NIC. > > Thanks, > Alireza ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-users] Problem in configuring rxmode.mq_mode 2020-07-16 15:32 ` Raslan Darawsheh @ 2020-07-16 18:55 ` Alireza Sanaee 2020-07-17 14:01 ` Alireza Sanaee 0 siblings, 1 reply; 4+ messages in thread From: Alireza Sanaee @ 2020-07-16 18:55 UTC (permalink / raw) To: Raslan Darawsheh, users Hello, Thanks for the message, It actually helped, and it now complies with RSS configuration using the patch. I also suspect that there is some sort of similar problem concerned with adding more flow rules as well. I added different rules to steer flows on a specific queue, however, DPDK seems to be totally unresponsive to my rules. Is there any idea here? I'm using DPDK 19.11.1! Thanks, Alireza On 7/16/20 11:32 PM, Raslan Darawsheh wrote: > Hi Alireza, > > We had this issue in old releases, and it has been fixed by this patch: > http://patches.dpdk.org/patch/69554/ > can you check if it will solve your issue? > > Kindest regards, > Raslan Darawsheh > >> -----Original Message----- >> From: users <users-bounces@dpdk.org> On Behalf Of Alireza Sanaee >> Sent: Thursday, July 16, 2020 3:11 PM >> To: users@dpdk.org >> Subject: [dpdk-users] Problem in configuring rxmode.mq_mode >> >> Dear all, >> >> I'd like to configure my NIC to not use RSS, however, it seems NIC >> doesn't adhere to the configurations set in the code, and it just >> applies a default RSS config. Particularly, I turned the RSS config off >> using `.mq_mode = ETH_MQ_RX_NONE`, but my NIC still keeps landing >> different flows on different queues. I have got a Mellanox ConnectX-4 NIC. >> >> Thanks, >> Alireza ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dpdk-users] Problem in configuring rxmode.mq_mode 2020-07-16 18:55 ` Alireza Sanaee @ 2020-07-17 14:01 ` Alireza Sanaee 0 siblings, 0 replies; 4+ messages in thread From: Alireza Sanaee @ 2020-07-17 14:01 UTC (permalink / raw) To: users Hey, I believe rules are working properly without any problems. Thanks, Alireza On 7/17/20 2:55 AM, Alireza Sanaee wrote: > Hello, > > Thanks for the message, > > It actually helped, and it now complies with RSS configuration using > the patch. I also suspect that there is some sort of similar problem > concerned with adding more flow rules as well. I added different rules > to steer flows on a specific queue, however, DPDK seems to be totally > unresponsive to my rules. Is there any idea here? > > I'm using DPDK 19.11.1! > > Thanks, > Alireza > > On 7/16/20 11:32 PM, Raslan Darawsheh wrote: >> Hi Alireza, >> >> We had this issue in old releases, and it has been fixed by this patch: >> http://patches.dpdk.org/patch/69554/ >> can you check if it will solve your issue? >> >> Kindest regards, >> Raslan Darawsheh >> >>> -----Original Message----- >>> From: users <users-bounces@dpdk.org> On Behalf Of Alireza Sanaee >>> Sent: Thursday, July 16, 2020 3:11 PM >>> To: users@dpdk.org >>> Subject: [dpdk-users] Problem in configuring rxmode.mq_mode >>> >>> Dear all, >>> >>> I'd like to configure my NIC to not use RSS, however, it seems NIC >>> doesn't adhere to the configurations set in the code, and it just >>> applies a default RSS config. Particularly, I turned the RSS config off >>> using `.mq_mode = ETH_MQ_RX_NONE`, but my NIC still keeps landing >>> different flows on different queues. I have got a Mellanox >>> ConnectX-4 NIC. >>> >>> Thanks, >>> Alireza ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-07-17 14:01 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-16 12:11 [dpdk-users] Problem in configuring rxmode.mq_mode Alireza Sanaee 2020-07-16 15:32 ` Raslan Darawsheh 2020-07-16 18:55 ` Alireza Sanaee 2020-07-17 14:01 ` Alireza Sanaee
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).