DPDK usage discussions
 help / color / mirror / Atom feed
* [dpdk-users] Installation of latest DPDK on x86_64 machine
@ 2021-07-06 12:26 Ashish Mishra
  2021-07-06 12:57 ` Raslan Darawsheh
  2021-07-06 13:07 ` David Marchand
  0 siblings, 2 replies; 6+ messages in thread
From: Ashish Mishra @ 2021-07-06 12:26 UTC (permalink / raw)
  To: users

Hi Members ,

I am trying to get DPDK installed on x86_64 mahine  by following below
steps
         git clone https://dpdk.org/git/dpdk
         cd dpdk/
         meson -Dexamples=all build
         cd build
         ninja
         ninja install

a) Any input where should in find "igb_uio.ko"

b) Even i tried modprobe igb_uio.ko , it didn't helped as i dont see
   /usr/local/lib64/dpdk/drivers folder but i can see
/usr/local/lib64/dpdk/pmds-21.3/librte_*

c) Basically , i wanted to install latest DPDK on my laptop and run an
testpmd
   Is there any document where we can find the step's to build and run
testpmd
   for the latest version of DPDK

I am new to DPDK , hence will be helpful if community can share some
pointers


Thanks ,
Ashish

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-users] Installation of latest DPDK on x86_64 machine
  2021-07-06 12:26 [dpdk-users] Installation of latest DPDK on x86_64 machine Ashish Mishra
@ 2021-07-06 12:57 ` Raslan Darawsheh
  2021-07-06 13:01   ` Ashish Mishra
  2021-07-06 13:07 ` David Marchand
  1 sibling, 1 reply; 6+ messages in thread
From: Raslan Darawsheh @ 2021-07-06 12:57 UTC (permalink / raw)
  To: Ashish Mishra, users

Hi Ashish,

Kmods are no longer part of the dpdk git tree,
Check this git for the kmods
http://git.dpdk.org/dpdk-kmods/

Kindest regards,
Raslan Darawsheh

> -----Original Message-----
> From: users <users-bounces@dpdk.org> On Behalf Of Ashish Mishra
> Sent: Tuesday, July 6, 2021 3:26 PM
> To: users <users@dpdk.org>
> Subject: [dpdk-users] Installation of latest DPDK on x86_64 machine
> 
> Hi Members ,
> 
> I am trying to get DPDK installed on x86_64 mahine  by following below steps
>          git clone https://dpdk.org/git/dpdk
>          cd dpdk/
>          meson -Dexamples=all build
>          cd build
>          ninja
>          ninja install
> 
> a) Any input where should in find "igb_uio.ko"
> 
> b) Even i tried modprobe igb_uio.ko , it didn't helped as i dont see
>    /usr/local/lib64/dpdk/drivers folder but i can see
> /usr/local/lib64/dpdk/pmds-21.3/librte_*
> 
> c) Basically , i wanted to install latest DPDK on my laptop and run an testpmd
>    Is there any document where we can find the step's to build and run
> testpmd
>    for the latest version of DPDK
> 
> I am new to DPDK , hence will be helpful if community can share some
> pointers
> 
> 
> Thanks ,
> Ashish

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-users] Installation of latest DPDK on x86_64 machine
  2021-07-06 12:57 ` Raslan Darawsheh
@ 2021-07-06 13:01   ` Ashish Mishra
  2021-07-06 13:22     ` Raslan Darawsheh
  0 siblings, 1 reply; 6+ messages in thread
From: Ashish Mishra @ 2021-07-06 13:01 UTC (permalink / raw)
  To: Raslan Darawsheh; +Cc: users

Hi Raslan ,

Thanks for the pointer , I will look at this.

Can I assume that the build is proper , if the helloworld application runs
fine.
or any other application is used by DPDK community to ensure sanity of
build .


Thanks ,
Ashish

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-users] Installation of latest DPDK on x86_64 machine
  2021-07-06 12:26 [dpdk-users] Installation of latest DPDK on x86_64 machine Ashish Mishra
  2021-07-06 12:57 ` Raslan Darawsheh
@ 2021-07-06 13:07 ` David Marchand
  1 sibling, 0 replies; 6+ messages in thread
From: David Marchand @ 2021-07-06 13:07 UTC (permalink / raw)
  To: Ashish Mishra; +Cc: users

On Tue, Jul 6, 2021 at 2:26 PM Ashish Mishra <ashishm@mvista.com> wrote:
>
> Hi Members ,
>
> I am trying to get DPDK installed on x86_64 mahine  by following below
> steps
>          git clone https://dpdk.org/git/dpdk
>          cd dpdk/
>          meson -Dexamples=all build
>          cd build
>          ninja
>          ninja install
>
> a) Any input where should in find "igb_uio.ko"
>
> b) Even i tried modprobe igb_uio.ko , it didn't helped as i dont see
>    /usr/local/lib64/dpdk/drivers folder but i can see
> /usr/local/lib64/dpdk/pmds-21.3/librte_*
>
> c) Basically , i wanted to install latest DPDK on my laptop and run an
> testpmd
>    Is there any document where we can find the step's to build and run
> testpmd
>    for the latest version of DPDK
>
> I am new to DPDK , hence will be helpful if community can share some
> pointers

Please, prefer vfio-pci over igb_uio.
https://doc.dpdk.org/guides/linux_gsg/linux_drivers.html#vfio

If you don't have an IOMMU in your system (like you are simply testing
dpdk, or running dpdk in a virtual machine with no vIOMMU), you can
use the noiommu mode, but keep note that it is less secure.
https://doc.dpdk.org/guides/linux_gsg/linux_drivers.html#vfio-no-iommu-mode


-- 
David Marchand


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-users] Installation of latest DPDK on x86_64 machine
  2021-07-06 13:01   ` Ashish Mishra
@ 2021-07-06 13:22     ` Raslan Darawsheh
  2021-07-07 12:35       ` Ashish Mishra
  0 siblings, 1 reply; 6+ messages in thread
From: Raslan Darawsheh @ 2021-07-06 13:22 UTC (permalink / raw)
  To: Ashish Mishra; +Cc: users

I guess you can have a look at this guide:
https://core.dpdk.org/doc/quick-start/
which should  help you on doing the sanity check which you are looking for.

Kindest regards,
Raslan Darawsheh

From: Ashish Mishra <ashishm@mvista.com>
Sent: Tuesday, July 6, 2021 4:02 PM
To: Raslan Darawsheh <rasland@nvidia.com>
Cc: users <users@dpdk.org>
Subject: Re: [dpdk-users] Installation of latest DPDK on x86_64 machine

Hi Raslan ,

Thanks for the pointer , I will look at this.

Can I assume that the build is proper , if the helloworld application runs fine.
or any other application is used by DPDK community to ensure sanity of build .


Thanks ,
Ashish


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [dpdk-users] Installation of latest DPDK on x86_64 machine
  2021-07-06 13:22     ` Raslan Darawsheh
@ 2021-07-07 12:35       ` Ashish Mishra
  0 siblings, 0 replies; 6+ messages in thread
From: Ashish Mishra @ 2021-07-07 12:35 UTC (permalink / raw)
  To: Raslan Darawsheh; +Cc: users

Thanks David & Raslan  ,
Will look at these suggestions.
Yesterday I was able to proceed somewhat with dpdk-stable-19.11.8
Will try the latest as suggested .

Thanks a lot .
Ashish





On Tue, Jul 6, 2021 at 6:52 PM Raslan Darawsheh <rasland@nvidia.com> wrote:

> I guess you can have a look at this guide:
>
> https://core.dpdk.org/doc/quick-start/
>
> which should  help you on doing the sanity check which you are looking for.
>
>
>
> Kindest regards,
>
> Raslan Darawsheh
>
>
>
> *From:* Ashish Mishra <ashishm@mvista.com>
> *Sent:* Tuesday, July 6, 2021 4:02 PM
> *To:* Raslan Darawsheh <rasland@nvidia.com>
> *Cc:* users <users@dpdk.org>
> *Subject:* Re: [dpdk-users] Installation of latest DPDK on x86_64 machine
>
>
>
> Hi Raslan ,
>
>
>
> Thanks for the pointer , I will look at this.
>
>
>
> Can I assume that the build is proper , if the helloworld application runs
> fine.
>
> or any other application is used by DPDK community to ensure sanity of
> build .
>
>
>
>
>
> Thanks ,
> Ashish
>
>
>

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-07-07 12:34 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-06 12:26 [dpdk-users] Installation of latest DPDK on x86_64 machine Ashish Mishra
2021-07-06 12:57 ` Raslan Darawsheh
2021-07-06 13:01   ` Ashish Mishra
2021-07-06 13:22     ` Raslan Darawsheh
2021-07-07 12:35       ` Ashish Mishra
2021-07-06 13:07 ` David Marchand

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git