* [dpdk-dev] [PATCH 00/10] VM Power Management
@ 2014-09-22 18:34 Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
` (10 more replies)
0 siblings, 11 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
The following patches add two DPDK sample applications and an alternate
implementation of librte_power for use in virtualized environments.
The idea is to provide librte_power functionality from within a VM to address
the lack of MSRs to facilitate frequency changes from within a VM.
It is ideally suited for Haswell which provides per core frequency scaling.
The current librte_power affects frequency changes via the acpi-cpufreq
'userspace' power governor, accessed via sysfs.
General Overview:(more information in each patch that follows).
The VM Power Management solution provides two components:
1)VM: Allows for the a DPDK application in a VM to reuse the librte_power
interface. Each lcore opens a Virto-Serial endpoint channel to the host,
where the re-implementation of librte_power simply forwards the requests for
frequency change to a host based monitor. The host monitor itself uses
librte_power.
Each lcore channel corresponds to a
serial device '/dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>'
which is opened in non-blocking mode.
While each Virtual CPU can be mapped to multiple physical CPUs it is
recommended that each vCPU should be mapped to a single core only.
2)Host: The host monitor is managed by a CLI, it allows for adding qemu/KVM
virtual machines and associated channels to the monitor, manually changing
CPU frequency, inspecting the state of VMs, vCPU to pCPU pinning and managing
channels.
Host channel endpoints are Virto-Serial endpoints configured as AF_UNIX file
sockets which follow a specific naming convention
i.e /tmp/powermonitor/<vm_name>.<channel_number>,
each channel has an 1:1 mapping to a VM endpoint
i.e. /dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>
Host channel endpoints are opened in non-blocking mode and are monitored via epoll.
Requests over each channel to change frequency are forwarded to the original
librte_power.
Channels must be manually configured as qemu-kvm command line arguments or
libvirt domain definition(xml) e.g.
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<channel type='unix'>
<source mode='bind' path='/tmp/powermonitor/<vm_name>.<channel_num>'/>
<target type='virtio' name='virtio.serial.port.poweragent.<channel_num>/>
<address type='virtio-serial' controller='0' bus='0' port='<N>'/>
</channel>
Where multiple channels can be configured by specifying multiple <channel>
elements, by replacing <vm_name>, <channel_num>.
<N>(port number) should be incremented by 1 for each new channel element.
More information on Virtio-Serial can be found here:
http://fedoraproject.org/wiki/Features/VirtioSerial
To enable the Hypervisor creation of channels, the host endpoint directory
must be created with qemu permissions:
mkdir /tmp/powermonitor
chown qemu:qemu /tmp/powermonitor
The host application runs on two seperate lcores:
Core N) CLI: For management of Virtual Machines adding channels to Monitor thread,
inspecting state and manually setting CPU frequency [PATCH 02/09]
Core N+1) Monitor Thread: An epoll based infintie loop that waits on channel events
from VMs and calls the corresponing librte_power functions.
A sample application is also provided to run on Virtual Machines, this
application provides a CLI to manually set the frequency of a
vCPU[PATCH 08/09]
The current l3fwd-power sample application can also be run on a VM.
Alan Carew (10):
Channel Manager and Monitor for VM Power Management(Host).
VM Power Management CLI(Host).
CPU Frequency Power Management(Host).
CPU Frequency Power Management(Host).
VM communication channels for VM Power Management(Guest).
Alternate implementation of librte_power for VM Power
Management(Guest).
Packet format for VM Power Management(Host and Guest).
Build system integration for VM Power Management(Guest and Host)
VM Power Management Unit Tests(Guest)
VM Power Management CLI(Guest).
app/test/Makefile | 1 +
app/test/autotest_data.py | 13 +
app/test/test_power_vm.c | 215 +++++++
config/common_linuxapp | 6 +
examples/vm_power_manager/Makefile | 57 ++
examples/vm_power_manager/channel_manager.c | 643 +++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 273 +++++++++
examples/vm_power_manager/channel_monitor.c | 228 ++++++++
examples/vm_power_manager/channel_monitor.h | 102 ++++
examples/vm_power_manager/guest_cli/Makefile | 56 ++
examples/vm_power_manager/guest_cli/main.c | 87 +++
examples/vm_power_manager/guest_cli/main.h | 52 ++
.../guest_cli/vm_power_cli_guest.c | 155 +++++
.../guest_cli/vm_power_cli_guest.h | 55 ++
examples/vm_power_manager/main.c | 113 ++++
examples/vm_power_manager/main.h | 52 ++
examples/vm_power_manager/power_manager.c | 234 ++++++++
examples/vm_power_manager/power_manager.h | 191 ++++++
examples/vm_power_manager/vm_power_cli.c | 567 ++++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 ++
lib/Makefile | 1 +
lib/librte_power_vm/Makefile | 49 ++
lib/librte_power_vm/channel_commands.h | 68 +++
lib/librte_power_vm/guest_channel.c | 150 +++++
lib/librte_power_vm/guest_channel.h | 89 +++
lib/librte_power_vm/rte_power.c | 146 +++++
mk/rte.app.mk | 4 +
27 files changed, 3654 insertions(+)
create mode 100644 app/test/test_power_vm.c
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
create mode 100644 lib/librte_power_vm/Makefile
create mode 100644 lib/librte_power_vm/channel_commands.h
create mode 100644 lib/librte_power_vm/guest_channel.c
create mode 100644 lib/librte_power_vm/guest_channel.h
create mode 100644 lib/librte_power_vm/rte_power.c
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 01/10] Channel Manager and Monitor for VM Power Management(Host).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 02/10] VM Power Management CLI(Host) Alan Carew
` (9 subsequent siblings)
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
The manager is responsible for adding communications channels to the Monitor
thread, tracking and reporting VM state and employs the libvirt API for
synchronization with the KVM Hypervisor. The manager interacts with the
Hypervisor to discover the mapping of virtual CPUS(vCPUs) to the host
physical CPUS(pCPUs) and to inspect the VM running state.
The manager provides the following functionality to the CLI:
1) Connect to a libvirtd instance, default: qemu:///system
2) Add a VM to an internal list, each VM is identified by a "name" which must
correspond a valid libvirt Domain Name.
3) Add communication channels associated with a VM to the epoll based Monitor
thread.
The channels must exist and be in the form of:
/tmp/powermonitor/<vm_name>.<channel_number>. Each channel is a
Virtio-Serial endpoint configured as an AF_UNIX file socket and opened in
non-blocking mode.
Each VM can have a maximum of 64 channels associated with it.
4) Disable or re-enable VM communication channels, channels once added to the
Monitor thread remain in that threads control, however acting on channel
requests can be disabled and renabled via CLI.
The monitor is an epoll based infinite loop running in a separate thread that
waits on channel events from VMs and calls the corresponding functions. Channel
definitions from the manager are registered via the epoll event opaque pointer
when calling epoll_ctl(EPOLL_CTL_ADD), this allows for obtaining the channels
file descriptor for reading EPOLLIN events and mapping the vCPU to pCPU(s)
associated with a request from a particular VM.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/channel_manager.c | 643 ++++++++++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 273 ++++++++++++
examples/vm_power_manager/channel_monitor.c | 228 ++++++++++
examples/vm_power_manager/channel_monitor.h | 102 +++++
4 files changed, 1246 insertions(+)
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
diff --git a/examples/vm_power_manager/channel_manager.c b/examples/vm_power_manager/channel_manager.c
new file mode 100644
index 0000000..7ec798f
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.c
@@ -0,0 +1,643 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+
+#include <rte_config.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_log.h>
+#include <rte_atomic.h>
+#include <rte_spinlock.h>
+
+#include <libvirt/libvirt.h>
+
+#include "channel_manager.h"
+#include "channel_commands.h"
+#include "channel_monitor.h"
+
+
+#define SOCKET_PATH "/tmp/powermonitor/"
+
+#define RTE_LOGTYPE_CHANNEL_MANAGER RTE_LOGTYPE_USER1
+
+#define ITERATIVE_BITMASK_CHECK_64(mask_u64b, i) \
+ for (i = 0; mask_u64b; mask_u64b &= ~(1ULL << i++)) \
+ if ((mask_u64b >> i) & 1) \
+
+/* Global pointer to libvirt connection */
+static virConnectPtr global_vir_conn_ptr;
+
+/*
+ * Represents a single Virtual Machine
+ */
+struct virtual_machine_info {
+ char name[MAX_NAME_LEN];
+ uint64_t pcpu_mask[MAX_VCPU];
+ struct channel_info *channels[MAX_VM_CHANNELS];
+ uint64_t channel_mask;
+ uint8_t num_channels;
+ enum vm_status status;
+ virDomainPtr domainPtr;
+ virDomainInfo info;
+ rte_spinlock_t config_spinlock;
+ LIST_ENTRY(virtual_machine_info) vms_info;
+};
+
+LIST_HEAD(, virtual_machine_info) vm_list_head;
+
+static struct virtual_machine_info *
+find_domain_by_name(const char *name)
+{
+ struct virtual_machine_info *info;
+ LIST_FOREACH(info, &vm_list_head, vms_info) {
+ if (!strncmp(info->name, name, MAX_NAME_LEN-1))
+ return info;
+ }
+ return NULL;
+}
+
+static void
+disconnect_hypervisor(void)
+{
+ if (global_vir_conn_ptr != NULL) {
+ virConnectClose(global_vir_conn_ptr);
+ global_vir_conn_ptr = NULL;
+ }
+}
+
+static int
+connect_hypervisor(const char *path)
+{
+ if (global_vir_conn_ptr != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error connecting to %s, connection"
+ "already established\n", path);
+ return -1;
+ }
+ global_vir_conn_ptr = virConnectOpen(path);
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error failed to open connection to "
+ "Hypervisor '%s'\n", path);
+ return -1;
+ }
+ return 0;
+}
+
+static int
+update_pcpus_mask(struct virtual_machine_info *vm_info)
+{
+ size_t maplen = VIR_CPU_MAPLEN(RTE_MAX_LCORE);
+ unsigned char cpumap[RTE_MAX_LCORE*maplen];
+ unsigned int i, j;
+
+ if (virDomainGetVcpuPinInfo(vm_info->domainPtr,
+ vm_info->info.nrVirtCpu,
+ cpumap,
+ maplen,
+ VIR_DOMAIN_DEVICE_MODIFY_CURRENT) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting Vcpu Pin Info\n");
+ return -1;
+ }
+ for (i = 0; i < vm_info->info.nrVirtCpu; i++) {
+ vm_info->pcpu_mask[i] = 0;
+ for (j = 0; j < maplen; j++)
+ vm_info->pcpu_mask[i] += VIR_CPU_USABLE(cpumap, maplen, i, j);
+ }
+ return 0;
+}
+
+uint64_t
+get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu)
+{
+ struct virtual_machine_info *vm_info =
+ (struct virtual_machine_info *)chan_info->priv_info;
+ return vm_info->pcpu_mask[vcpu];
+}
+
+static inline int
+channel_exists(struct virtual_machine_info *vm_info, unsigned int channel_num)
+{
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ if (vm_info->channel_mask & (1ULL << channel_num)) {
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 1;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+int
+add_vm(const char *vm_name)
+{
+ struct virtual_machine_info *new_domain;
+ virDomainPtr dom_ptr;
+
+ if (find_domain_by_name(vm_name) != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add VM: VM '%s' "
+ "already exists\n", vm_name);
+ return -1;
+ }
+
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "No connection to hypervisor exists\n");
+ return -1;
+ }
+ dom_ptr = virDomainLookupByName(global_vir_conn_ptr, vm_name);
+ if (dom_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error on VM lookup with libvirt: "
+ "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+
+ new_domain = rte_malloc("virtual_machine_info", sizeof(*new_domain),
+ CACHE_LINE_SIZE);
+ if (new_domain == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to allocate memory for VM "
+ "info\n");
+ return -1;
+ }
+ new_domain->domainPtr = dom_ptr;
+ if (virDomainGetInfo(new_domain->domainPtr, &new_domain->info) != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to get libvirt VM info\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ if (new_domain->info.nrVirtCpu > MAX_VCPU) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error the number of virtual CPUs(%u) is "
+ "greater than allowable(%d)\n", new_domain->info.nrVirtCpu,
+ MAX_VCPU);
+ rte_free(new_domain);
+ return -1;
+ }
+ if (update_pcpus_mask(new_domain) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting physical CPU pinning\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ strncpy(new_domain->name, vm_name, sizeof(new_domain->name));
+ new_domain->channel_mask = 0;
+ new_domain->num_channels = 0;
+
+ if (!virDomainIsActive(dom_ptr))
+ new_domain->status = VM_INACTIVE;
+ else
+ new_domain->status = VM_ACTIVE;
+
+ rte_spinlock_init(&(new_domain->config_spinlock));
+ LIST_INSERT_HEAD(&vm_list_head, new_domain, vms_info);
+ return 0;
+}
+
+static int
+open_non_blocking_channel(struct channel_info *info)
+{
+ int ret, flags;
+ struct sockaddr_un sock_addr;
+ fd_set soc_fd_set;
+ struct timeval tv;
+
+ info->fd = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (info->fd == -1) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error(%s) creating socket for '%s'\n",
+ strerror(errno),
+ info->channel_path);
+ return -1;
+ }
+ sock_addr.sun_family = AF_UNIX;
+ memcpy(&sock_addr.sun_path, info->channel_path,
+ strlen(info->channel_path)+1);
+
+ /* Get current flags */
+ flags = fcntl(info->fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) fcntl get flags socket for"
+ "'%s'\n", strerror(errno), info->channel_path);
+ return 1;
+ }
+ /* Set to Non Blocking */
+ flags |= O_NONBLOCK;
+ if (fcntl(info->fd, F_SETFL, flags) < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) setting non-blocking "
+ "socket for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ ret = connect(info->fd, (struct sockaddr *)&sock_addr,
+ sizeof(sock_addr));
+ if (ret < 0) {
+ /* ECONNREFUSED error is given when VM is not active */
+ if (errno == ECONNREFUSED) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "VM is not active or has not "
+ "activated its endpoint to channel %s\n",
+ info->channel_path);
+ return -1;
+ }
+ /* Wait for tv_sec if in progress */
+ else if (errno == EINPROGRESS) {
+ tv.tv_sec = 2;
+ tv.tv_usec = 0;
+ FD_ZERO(&soc_fd_set);
+ FD_SET(info->fd, &soc_fd_set);
+ if (select(info->fd+1, NULL, &soc_fd_set, NULL, &tv) > 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Timeout or error on channel "
+ "'%s'\n", info->channel_path);
+ return -1;
+ }
+ } else {
+ /* Any other error */
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) connecting socket"
+ " for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int
+setup_channel_info(struct virtual_machine_info **vm_info_dptr,
+ struct channel_info **chan_info_dptr, unsigned channel_num)
+{
+ struct channel_info *chan_info = *chan_info_dptr;
+ struct virtual_machine_info *vm_info = *vm_info_dptr;
+
+ chan_info->channel_num = channel_num;
+ chan_info->priv_info = (void *)vm_info;
+ chan_info->status = CHANNEL_DISCONNECTED;
+ if (open_non_blocking_channel(chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could not open channel: "
+ "'%s' for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+ }
+ if (add_channel_to_monitor(&chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could add channel: "
+ "'%s' to epoll ctl for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+
+ }
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->num_channels++;
+ vm_info->channel_mask |= 1ULL << channel_num;
+ vm_info->channels[channel_num] = chan_info;
+ chan_info->status = CHANNEL_CONNECTED;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+int
+add_all_channels(const char *vm_name)
+{
+ DIR *d;
+ struct dirent *dir;
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char *token, *remaining, *tail_ptr;
+ char socket_name[PATH_MAX];
+ unsigned channel_num;
+ int num_channels_enabled = 0;
+
+ /* verify VM exists */
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' not found"
+ " during channel discovery\n", vm_name);
+ return 0;
+ }
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = VM_INACTIVE;
+ return 0;
+ }
+ d = opendir(SOCKET_PATH);
+ if (d == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error opening directory '%s': %s\n",
+ SOCKET_PATH, strerror(errno));
+ return -1;
+ }
+ while ((dir = readdir(d)) != NULL) {
+ if (!strncmp(dir->d_name, ".", 1) ||
+ !strncmp(dir->d_name, "..", 2))
+ continue;
+
+ snprintf(socket_name, sizeof(socket_name), "%s", dir->d_name);
+ remaining = socket_name;
+ /* Extract vm_name from "<vm_name>.<channel_num>" */
+ token = strsep(&remaining, ".");
+ if (remaining == NULL)
+ continue;
+ if (strncmp(vm_name, token, MAX_NAME_LEN))
+ continue;
+
+ /* remaining should contain only <channel_num> */
+ errno = 0;
+ channel_num = (unsigned int)strtol(remaining, &tail_ptr, 0);
+ if ((errno != 0) || (remaining[0] == '\0') ||
+ (*tail_ptr != '\0') || tail_ptr == NULL) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Malformed channel name"
+ "'%s' found it should be in the form of "
+ "'<guest_name>.<channel_num>(decimal)'\n",
+ dir->d_name);
+ continue;
+ }
+ if (channel_num >= MAX_VM_CHANNELS) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Channel number(%u) is "
+ "greater than max allowable: %d, skipping '%s%s'\n",
+ channel_num, MAX_VM_CHANNELS-1, SOCKET_PATH,
+ dir->d_name);
+ continue;
+ }
+ /* if channel has not been added previously */
+ if (channel_exists(vm_info, channel_num))
+ continue;
+
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s%s'\n", SOCKET_PATH, dir->d_name);
+ continue;
+ }
+
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s", SOCKET_PATH,
+ dir->d_name);
+
+ if (setup_channel_info(&vm_info, &chan_info, channel_num) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+
+ num_channels_enabled++;
+ }
+ closedir(d);
+ return num_channels_enabled;
+}
+
+int
+add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list)
+{
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char socket_path[PATH_MAX];
+ unsigned i;
+ int num_channels_enabled = 0;
+
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = VM_INACTIVE;
+ return 0;
+ }
+ for (i = 0; i < len_channel_list; i++) {
+ if (i == MAX_VM_CHANNELS)
+ continue;
+ if (channel_exists(vm_info, channel_list[i])) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Channel already exists, skipping "
+ "'%s.%u'\n", vm_name, i);
+ continue;
+ }
+
+ snprintf(socket_path, sizeof(socket_path), "%s%s.%u", SOCKET_PATH,
+ vm_name, channel_list[i]);
+ errno = 0;
+ if (access(socket_path, F_OK) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channel path '%s' error: "
+ "%s\n", socket_path, strerror(errno));
+ continue;
+ }
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s'\n", socket_path);
+ continue;
+ }
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s.%u",
+ SOCKET_PATH, vm_name, channel_list[i]);
+ if (setup_channel_info(&vm_info, &chan_info, channel_list[i]) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+ num_channels_enabled++;
+
+ }
+ return num_channels_enabled;
+}
+
+int
+remove_channel(struct channel_info *chan_info)
+{
+ struct virtual_machine_info *vm_info;
+ close(chan_info->fd);
+ vm_info = (struct virtual_machine_info *)chan_info->priv_info;
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channel_mask &= ~(1ULL << chan_info->channel_num);
+ vm_info->num_channels--;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ rte_free(chan_info);
+ return 0;
+}
+
+int
+remove_vm(const char *vm_name)
+{
+ struct virtual_machine_info *vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM: VM '%s' "
+ "not found\n", vm_name);
+ return -1;
+ }
+ rte_spinlock_lock(&vm_info->config_spinlock);
+ if (vm_info->num_channels != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM '%s', there are "
+ "%"PRId8" channels still active\n",
+ vm_name, vm_info->num_channels);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ return -1;
+ }
+ LIST_REMOVE(vm_info, vms_info);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ rte_free(vm_info);
+ return 0;
+}
+
+int
+set_channel_status_all(const char *vm_name, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned int i;
+ uint64_t mask;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_CONNECTED || status == CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to disable channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ vm_info->channels[i]->status = status;
+ num_channels_changed++;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return num_channels_changed;
+
+}
+
+int
+set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_CONNECTED || status == CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+ for (i = 0; i < len_channel_list; i++) {
+ if (channel_exists(vm_info, channel_list[i])) {
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channels[channel_list[i]]->status = status;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ num_channels_changed++;
+ }
+ }
+ return num_channels_changed;
+}
+
+int
+get_info_vm(const char *vm_name, struct vm_info *info)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i, channel_num = 0;
+ uint64_t mask;
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+ info->status = VM_ACTIVE;
+ if (!virDomainIsActive(vm_info->domainPtr))
+ info->status = VM_INACTIVE;
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ info->channels[channel_num].channel_num = i;
+ memcpy(info->channels[channel_num].channel_path,
+ vm_info->channels[i]->channel_path, PATH_MAX);
+ info->channels[channel_num].status = vm_info->channels[i]->status;
+ info->channels[channel_num].fd = vm_info->channels[i]->fd;
+ channel_num++;
+ }
+ info->num_channels = channel_num;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ info->num_vcpus = vm_info->info.nrVirtCpu;
+
+ memcpy(info->name, vm_info->name, sizeof(vm_info->name));
+
+ if (update_pcpus_mask(vm_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' unable to update vCPU Pinning\n",
+ vm_name);
+ return -1;
+ }
+ return 0;
+}
+
+int
+channel_manager_init(const char *path)
+{
+ LIST_INIT(&vm_list_head);
+ if (connect_hypervisor(path) < 0)
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to initialize channel manager\n");
+ return 0;
+}
+
+void
+channel_manager_exit(void)
+{
+ unsigned int i;
+ uint64_t mask;
+ struct virtual_machine_info *vm_info;
+
+ LIST_FOREACH(vm_info, &vm_list_head, vms_info) {
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ remove_channel_from_monitor(vm_info->channels[i]);
+ close(vm_info->channels[i]->fd);
+ rte_free(vm_info->channels[i]);
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ LIST_REMOVE(vm_info, vms_info);
+ rte_free(vm_info);
+ }
+ disconnect_hypervisor();
+}
+
diff --git a/examples/vm_power_manager/channel_manager.h b/examples/vm_power_manager/channel_manager.h
new file mode 100644
index 0000000..d114201
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.h
@@ -0,0 +1,273 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MANAGER_H_
+#define CHANNEL_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <linux/limits.h>
+#include <rte_atomic.h>
+
+/* Maximum number of channels per VM */
+#define MAX_VM_CHANNELS 64
+
+/* Maximum name length including '\0' terminator */
+#define MAX_NAME_LEN 64
+
+/* Maximum number of virtual CPUs that can be assigned to a VM */
+#define MAX_VCPU 64
+
+/* Default Hypervisor Path for libvirt(qemu/KVM) */
+#define DEFAULT_HV_PATH "qemu:///system"
+
+/* Communication Channel Status */
+enum channel_status { CHANNEL_DISCONNECTED = 0, CHANNEL_CONNECTED,
+ CHANNEL_DISABLED, CHANNEL_PROCESSING};
+
+/* VM libvirt(qemu/KVM) connection status */
+enum vm_status { VM_INACTIVE = 0, VM_ACTIVE};
+
+/*
+ * Represents a single and exclusive VM channel that exists between a guest and
+ * the host.
+ */
+struct channel_info {
+ char channel_path[PATH_MAX]; /**< Path to host socket */
+ volatile uint32_t status; /**< Connection status(enum channel_status) */
+ int fd; /**< AF_UNIX socket fd */
+ unsigned int channel_num; /**< /tmp/powermonitor/<vm_name>.channel_num */
+ void *priv_info; /**< Pointer to private info, do not modify */
+};
+
+/* Represents a single VM instance used to return internal information about
+ * a VM */
+struct vm_info {
+ char name[MAX_NAME_LEN]; /**< VM name */
+ enum vm_status status; /**< libvirt status */
+ uint64_t pcpu_mask[MAX_VCPU]; /**< pCPU mask for each vCPU */
+ unsigned num_vcpus; /**< number of vCPUS */
+ struct channel_info channels[MAX_VM_CHANNELS];/**< Array of channel_info */
+ unsigned num_channels; /**< Number of channels */
+};
+
+/**
+ * Initialize the Channel Manager resources and connect to the Hypervisor
+ * specified in path.
+ * This must be successfully called first before calling any other functions.
+ * It must only be call once;
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_manager_init(const char *path);
+
+/**
+ * Free resources associated with the Channel Manager.
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * None
+ */
+void channel_manager_exit(void);
+
+/**
+ * Get the Physical CPU mask for VM lcore channel(vcpu), result is assigned to
+ * core_mask.
+ * It is not thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info
+ *
+ * @param vcpu
+ * The virtual CPU to query.
+ *
+ *
+ * @return
+ * - 0 on error.
+ * - >0 on success.
+ */
+uint64_t get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu);
+
+/**
+ * Add a VM as specified by name to the Channel Manager. The name must
+ * correspond to a valid libvirt domain name.
+ * This is required prior to adding channels.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_vm(const char *name);
+
+/**
+ * Remove a previously added Virtual Machine from the Channel Manager
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_vm(const char *name);
+
+/**
+ * Add all available channels to the VM as specified by name.
+ * Channels in the form of paths(/tmp/powermonitor/<vm_name>.<channel_number>
+ * will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - N the number of channels added for the VM
+ */
+int add_all_channels(const char *vm_name);
+
+/**
+ * Add the channel numbers in channel_list to the domain specified by name.
+ * Channels in the form of paths(/tmp/powermonitor/<vm_name>.<channel_number>
+ * will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel number to add
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned num_channels);
+
+/**
+ * Remove a channel definition from the channel manager. This must only be
+ * called from the channel monitor thread.
+ *
+ * @param chan_info
+ * Pointer to a valid struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel(struct channel_info *chan_info);
+
+/**
+ * For all channels associated with a Virtual Machine name, update the
+ * connection status. Valid states are CHANNEL_CONNECTED or CHANNEL_DISABLED
+ * only.
+ *
+ *
+ * @param name
+ * Virtual Machine name to modify all channels.
+ *
+ * @param status
+ * The status to set each channel
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int set_channel_status_all(const char *name, enum channel_status status);
+
+/**
+ * For all channels in channel_list associated with a Virtual Machine name
+ * update the connection status of each.
+ * Valid states are CHANNEL_CONNECTED or CHANNEL_DISABLED only.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel numbers to
+ * modify.
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels modified for the VM
+ * - 0 for error
+ */
+int set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status);
+
+/**
+ * Populates a pointer to struct vm_info associated with vm_name.
+ *
+ * @param vm_name
+ * The name of the virtual machine to lookup.
+ *
+ * @param vm_info
+ * Pointer to a struct vm_info, this must be allocated prior to calling this
+ * function.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int get_info_vm(const char *vm_name, struct vm_info *info);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_MANAGER_H_ */
diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
new file mode 100644
index 0000000..7207a2e
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <signal.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/epoll.h>
+#include <sys/queue.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_atomic.h>
+
+
+#include "channel_monitor.h"
+#include "channel_commands.h"
+#include "channel_manager.h"
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_CHANNEL_MONITOR RTE_LOGTYPE_USER1
+
+#define MAX_EVENTS 256
+
+
+static volatile unsigned run_loop = 1;
+static int global_event_fd;
+static struct epoll_event *global_events_list;
+
+void channel_monitor_exit(void)
+{
+ run_loop = 0;
+ rte_free(global_events_list);
+}
+
+static int
+process_request(struct channel_packet *pkt, struct channel_info *chan_info)
+{
+ uint64_t core_mask;
+
+ if (chan_info == NULL)
+ return -1;
+
+ if (rte_atomic32_cmpset(&(chan_info->status), CHANNEL_CONNECTED,
+ CHANNEL_PROCESSING) == 0)
+ return -1;
+
+ if (pkt->command == CPU_POWER) {
+ core_mask = get_pcpus_mask(chan_info, pkt->resource_id);
+ if (core_mask == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error get physical CPU mask for "
+ "channel '%s' using vCPU(%u)\n", chan_info->channel_path,
+ (unsigned)pkt->unit);
+ return -1;
+ }
+ if (__builtin_popcountll(core_mask) == 1) {
+
+ unsigned core_num = __builtin_ffsll(core_mask) - 1;
+ switch (pkt->unit) {
+ case(CPU_SCALE_MIN):
+ power_manager_scale_core_min(core_num);
+ break;
+ case(CPU_SCALE_MAX):
+ power_manager_scale_core_max(core_num);
+ break;
+ case(CPU_SCALE_DOWN):
+ power_manager_scale_core_down(core_num);
+ break;
+ case(CPU_SCALE_UP):
+ power_manager_scale_core_up(core_num);
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (pkt->unit) {
+ case(CPU_SCALE_MIN):
+ power_manager_scale_mask_min(core_mask);
+ break;
+ case(CPU_SCALE_MAX):
+ power_manager_scale_mask_max(core_mask);
+ break;
+ case(CPU_SCALE_DOWN):
+ power_manager_scale_mask_down(core_mask);
+ break;
+ case(CPU_SCALE_UP):
+ power_manager_scale_mask_up(core_mask);
+ break;
+ default:
+ break;
+ }
+
+ }
+ }
+ /* Return is not checked as channel status may have been set to DISABLED
+ * from management thread
+ */
+ rte_atomic32_cmpset(&(chan_info->status), CHANNEL_PROCESSING,
+ CHANNEL_CONNECTED);
+ return 0;
+
+}
+
+int
+add_channel_to_monitor(struct channel_info **chan_info)
+{
+ struct channel_info *info = *chan_info;
+ struct epoll_event event;
+ event.events = EPOLLIN;
+ event.data.ptr = info;
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_ADD, info->fd, &event) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to add channel '%s' "
+ "to epoll\n", info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+remove_channel_from_monitor(struct channel_info *chan_info)
+{
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_DEL, chan_info->fd, NULL) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to remove channel '%s' "
+ "from epoll\n", chan_info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+channel_monitor_init(void)
+{
+ global_event_fd = epoll_create1(0);
+ if (global_event_fd == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error creating epoll context with "
+ "error %s\n", strerror(errno));
+ return -1;
+ }
+ global_events_list = rte_malloc("epoll_events", sizeof(*global_events_list)
+ * MAX_EVENTS, CACHE_LINE_SIZE);
+ if (global_events_list == NULL) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to rte_malloc for"
+ "epoll events\n");
+ return -1;
+ }
+ return 0;
+}
+
+void
+run_channel_monitor(void)
+{
+ while (run_loop) {
+ int n_events, i;
+ n_events = epoll_wait(global_event_fd, global_events_list,
+ MAX_EVENTS, 1);
+ if (!run_loop)
+ break;
+ for (i = 0; i < n_events; i++) {
+ struct channel_info *chan_info = (struct channel_info *)
+ global_events_list[i].data.ptr;
+ if ((global_events_list[i].events & EPOLLERR) ||
+ (global_events_list[i].events & EPOLLHUP)) {
+ remove_channel(chan_info);
+ }
+ if (global_events_list[i].events & EPOLLIN) {
+
+ int n_bytes, err = 0;
+ struct channel_packet pkt;
+ void *buffer = &pkt;
+ int buffer_len = sizeof(pkt);
+ while (buffer_len > 0) {
+ n_bytes = read(chan_info->fd, buffer, buffer_len);
+ if (n_bytes == buffer_len)
+ break;
+ if (n_bytes == -1) {
+ err = errno;
+ RTE_LOG(DEBUG, CHANNEL_MONITOR, "Received error on "
+ "channel '%s' read: %s\n",
+ chan_info->channel_path, strerror(err));
+ remove_channel(chan_info);
+ break;
+ }
+ buffer = (char *)buffer + n_bytes;
+ buffer_len -= n_bytes;
+
+ }
+ if (!err)
+ process_request(&pkt, chan_info);
+ }
+ }
+ }
+}
diff --git a/examples/vm_power_manager/channel_monitor.h b/examples/vm_power_manager/channel_monitor.h
new file mode 100644
index 0000000..c138607
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.h
@@ -0,0 +1,102 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MONITOR_H_
+#define CHANNEL_MONITOR_H_
+
+#include "channel_manager.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Setup the Channel Monitor resources required to initialize epoll.
+ * Must be called first before calling other functions.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_monitor_init(void);
+
+/**
+ * Run the channel monitor, loops forever on on epoll_wait.
+ *
+ *
+ * @return
+ * None
+ */
+void run_channel_monitor(void);
+
+/**
+ * Exit the Channel Monitor, exiting the epoll_wait loop and events processing.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+void channel_monitor_exit(void);
+
+/**
+ * Add an open channel to monitor via epoll. A pointer to struct channel_info
+ * will be registered with epoll for event processing.
+ * It is thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info pointer.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_channel_to_monitor(struct channel_info **chan_info);
+
+/**
+ * Remove a previously added channel from epoll control.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel_from_monitor(struct channel_info *chan_info);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* CHANNEL_MONITOR_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 02/10] VM Power Management CLI(Host).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 03/10] CPU Frequency Power Management(Host) Alan Carew
` (8 subsequent siblings)
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
The CLI is used for administrating the channel monitor and manager and
manually setting the CPU frequency on the host.
Supports the following commands:
add_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
rm_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
add_channels [Fixed STRING]: add_channels <vm_name> <list>|all, add
communication channels for the specified VM, the virtio channels must be
enabled in the VM configuration(qemu/libvirt) and the associated VM must be
active. <list> is a comma-separated list of channel numbers to add, using the
keyword 'all' will attempt to add all channels for the VM
set_channel_status [Fixed STRING]:
set_channel_status <vm_name> <list>|all enabled|disabled, enable or disable
the communication channels in list(comma-seperated) for the specified VM,
alternatively list can be replaced with keyword 'all'. Disabled channels will
still receive packets on the host, however the commands they specify will be
ignored. Set status to 'enabled' to begin processing requests again.
show_vm [Fixed STRING]: show_vm <vm_name>, prints the information on the
specified VM(s), the information lists the number of vCPUS, the pinning to
pCPU(s) as a bit mask, along with any communication channels associated with
each VM
show_cpu_freq_mask [Fixed STRING]: show_cpu_freq_mask <mask>, Get the current
frequency for each core specified in the mask
set_cpu_freq_mask [Fixed STRING]: set_cpu_freq <core_mask> <up|down|min|max>,
Set the current frequency for the cores specified in <core_mask> by scaling
each up/down/min/max.
show_cpu_freq [Fixed STRING]: Get the current frequency for the specified core
set_cpu_freq [Fixed STRING]: set_cpu_freq <core_num> <up|down|min|max>,
Set the current frequency for the specified core by scaling up/down/min/max
quit [Fixed STRING]: close the application
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/vm_power_cli.c | 567 +++++++++++++++++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 +++
2 files changed, 614 insertions(+)
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
diff --git a/examples/vm_power_manager/vm_power_cli.c b/examples/vm_power_manager/vm_power_cli.c
new file mode 100644
index 0000000..f5e3759
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.c
@@ -0,0 +1,567 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdio.h>
+#include <string.h>
+#include <termios.h>
+#include <errno.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+
+#include "vm_power_cli.h"
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "channel_commands.h"
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+struct cmd_show_vm_result {
+ cmdline_fixed_string_t show_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_show_vm_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_vm_result *res = parsed_result;
+ struct vm_info info;
+ unsigned i;
+
+ if (get_info_vm(res->vm_name, &info) != 0)
+ return;
+ cmdline_printf(cl, "VM: '%s', status = ", info.name);
+ if (info.status == VM_ACTIVE)
+ cmdline_printf(cl, "ACTIVE\n");
+ else
+ cmdline_printf(cl, "INACTIVE\n");
+ cmdline_printf(cl, "Channels %u\n", info.num_channels);
+ for (i = 0; i < info.num_channels; i++) {
+ cmdline_printf(cl, " [%u]: %s, status = ", i,
+ info.channels[i].channel_path);
+ switch (info.channels[i].status) {
+ case CHANNEL_CONNECTED:
+ cmdline_printf(cl, "CONNECTED\n");
+ break;
+ case CHANNEL_DISCONNECTED:
+ cmdline_printf(cl, "DISCONNECTED\n");
+ break;
+ case CHANNEL_DISABLED:
+ cmdline_printf(cl, "DISABLED\n");
+ break;
+ case CHANNEL_PROCESSING:
+ cmdline_printf(cl, "PROCESSING\n");
+ break;
+ default:
+ cmdline_printf(cl, "UNKNOWN\n");
+ break;
+ }
+ }
+ cmdline_printf(cl, "Virtual CPU(s): %u\n", info.num_vcpus);
+ for (i = 0; i < info.num_vcpus; i++) {
+ cmdline_printf(cl, " [%u]: Physical CPU Mask 0x%"PRIx64"\n", i,
+ info.pcpu_mask[i]);
+ }
+}
+
+cmdline_parse_token_string_t cmd_vm_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ show_vm, "show_vm");
+cmdline_parse_token_string_t cmd_show_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_show_vm_set = {
+ .f = cmd_show_vm_parsed,
+ .data = NULL,
+ .help_str = "show_vm <vm_name>, prints the information on the "
+ "specified VM(s), the information lists the number of vCPUS, the "
+ "pinning to pCPU(s) as a bit mask, along with any communication "
+ "channels associated with each VM",
+ .tokens = {
+ (void *)&cmd_vm_show,
+ (void *)&cmd_show_vm_name,
+ NULL,
+ },
+};
+
+struct cmd_vm_op_result {
+ cmdline_fixed_string_t op_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_vm_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vm_op_result *res = parsed_result;
+
+ if (!strcmp(res->op_vm, "add_vm")) {
+ if (add_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to add VM '%s'\n", res->vm_name);
+ } else if (remove_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to remove VM '%s'\n", res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_vm_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ op_vm, "add_vm#rm_vm");
+cmdline_parse_token_string_t cmd_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_vm_op_set = {
+ .f = cmd_vm_op_parsed,
+ .data = NULL,
+ .help_str = "add_vm|rm_vm <name>, add a VM for "
+ "subsequent operations with the CLI or remove a previously added "
+ "VM from the VM Power Manager",
+ .tokens = {
+ (void *)&cmd_vm_op,
+ (void *)&cmd_vm_name,
+ NULL,
+ },
+};
+
+/* *** VM channel operations *** */
+struct cmd_channels_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+};
+static void
+cmd_channels_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num, i;
+ int channels_added;
+ unsigned channel_list[MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_op_result *res = parsed_result;
+
+ if (!strcmp(res->channel_list, "all")) {
+ channels_added = add_all_channels(res->vm_name);
+ cmdline_printf(cl, "Added %d channels for VM '%s'\n",
+ channels_added, res->vm_name);
+ return;
+ }
+
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "Channel number '%u' exceeds the maximum number "
+ "of allowable channels(%u) for VM '%s'\n", channel_num,
+ MAX_VM_CHANNELS, res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ for (i = 0; i < num_channels; i++)
+ cmdline_printf(cl, "[%u]: Adding channel %u\n", i, channel_list[i]);
+
+ channels_added = add_channels(res->vm_name, channel_list,
+ num_channels);
+ cmdline_printf(cl, "Enabled %d channels for '%s'\n", channels_added,
+ res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ op, "add_channels");
+cmdline_parse_token_string_t cmd_channels_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ channel_list, NULL);
+
+cmdline_parse_inst_t cmd_channels_op_set = {
+ .f = cmd_channels_op_parsed,
+ .data = NULL,
+ .help_str = "add_channels <vm_name> <list>|all, add "
+ "communication channels for the specified VM, the "
+ "virtio channels must be enabled in the VM "
+ "configuration(qemu/libvirt) and the associated VM must be active. "
+ "<list> is a comma-seperated list of channel numbers to add, using "
+ "the keyword 'all' will attempt to add all channels for the VM",
+ .tokens = {
+ (void *)&cmd_channels_op,
+ (void *)&cmd_channels_vm_name,
+ (void *)&cmd_channels_list,
+ NULL,
+ },
+};
+
+struct cmd_channels_status_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+ cmdline_fixed_string_t status;
+};
+
+static void
+cmd_channels_status_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num;
+ int changed;
+ unsigned channel_list[MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_status_op_result *res = parsed_result;
+ enum channel_status status;
+
+ if (!strcmp(res->status, "enabled"))
+ status = CHANNEL_CONNECTED;
+ else
+ status = CHANNEL_DISABLED;
+
+ if (!strcmp(res->channel_list, "all")) {
+ changed = set_channel_status_all(res->vm_name, status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+ return;
+ }
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "%u exceeds the maximum number of allowable "
+ "channels(%u) for VM '%s'\n", channel_num, MAX_VM_CHANNELS,
+ res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ changed = set_channel_status(res->vm_name, channel_list, num_channels,
+ status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_status_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ op, "set_channel_status");
+cmdline_parse_token_string_t cmd_channels_status_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_status_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ channel_list, NULL);
+cmdline_parse_token_string_t cmd_channels_status =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ status, "enabled#disabled");
+
+cmdline_parse_inst_t cmd_channels_status_op_set = {
+ .f = cmd_channels_status_op_parsed,
+ .data = NULL,
+ .help_str = "set_channel_status <vm_name> <list>|all enabled|disabled, "
+ " enable or disable the communication channels in "
+ "list(comma-seperated) for the specified VM, alternatively list can"
+ " be replaced with keyword 'all'. Disabled channels will still "
+ "receive packets on the host, however the commands they specify "
+ "will be ignored. Set status to 'enabled' to begin processing "
+ "requests again.",
+ .tokens = {
+ (void *)&cmd_channels_status_op,
+ (void *)&cmd_channels_status_vm_name,
+ (void *)&cmd_channels_status_list,
+ (void *)&cmd_channels_status,
+ NULL,
+ },
+};
+
+/* *** CPU Frequency operations *** */
+struct cmd_show_cpu_freq_mask_result {
+ cmdline_fixed_string_t show_cpu_freq_mask;
+ uint64_t core_mask;
+};
+
+static void
+cmd_show_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_mask_result *res = parsed_result;
+ unsigned i;
+ uint64_t mask = res->core_mask;
+ uint32_t freq;
+ for (i = 0; mask; mask &= ~(1ULL << i++)) {
+ if ((mask >> i) & 1) {
+ freq = power_manager_get_current_frequency(i);
+ if (freq > 0)
+ cmdline_printf(cl, "Core %u: %"PRId32"\n", i, freq);
+ }
+ }
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ show_cpu_freq_mask, "show_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_show_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ core_mask, UINT64);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_mask_set = {
+ .f = cmd_show_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "show_cpu_freq_mask <mask>, Get the current frequency for each "
+ "core specified in the mask",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq_mask,
+ (void *)&cmd_show_cpu_freq_mask_core_mask,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_mask_result {
+ cmdline_fixed_string_t set_cpu_freq_mask;
+ uint64_t core_mask;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_cpu_freq_mask_result *res = parsed_result;
+ int ret = -1;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_mask_up(res->core_mask);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_mask_down(res->core_mask);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_mask_min(res->core_mask);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_mask_max(res->core_mask);
+ if (ret != 0) {
+ cmdline_printf(cl, "Error scaling core_mask(0x%"PRIx64") '%s'\n",
+ res->core_mask, res->cmd);
+ };
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ set_cpu_freq_mask, "set_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_set_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ core_mask, UINT64);
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask_result =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_mask_set = {
+ .f = cmd_set_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_mask> <up|down|min|max>, Set the current "
+ "frequency for the cores specified in <core_mask> by scaling "
+ "each up/down/min/max.",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq_mask,
+ (void *)&cmd_set_cpu_freq_mask_core_mask,
+ (void *)&cmd_set_cpu_freq_mask_result,
+ NULL,
+ },
+};
+
+
+
+struct cmd_show_cpu_freq_result {
+ cmdline_fixed_string_t show_cpu_freq;
+ uint8_t core_num;
+};
+
+static void
+cmd_show_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_result *res = parsed_result;
+ uint32_t curr_freq = power_manager_get_current_frequency(res->core_num);
+ if (curr_freq == 0) {
+ cmdline_printf(cl, "Unable to get frequency for core %u\n",
+ res->core_num);
+ return;
+ }
+ cmdline_printf(cl, "Core %u frequency: %"PRId32"\n", res->core_num,
+ curr_freq);
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_result,
+ show_cpu_freq, "show_cpu_freq");
+
+cmdline_parse_token_num_t cmd_show_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_result,
+ core_num, UINT8);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_set = {
+ .f = cmd_show_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "Get the current frequency for the specified core",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq,
+ (void *)&cmd_show_cpu_freq_core_num,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t core_num;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_core_up(res->core_num);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_core_down(res->core_num);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_core_min(res->core_num);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_core_max(res->core_num);
+ if (ret != 0) {
+ cmdline_printf(cl, "Error scaling core(%u) '%s'\n", res->core_num,
+ res->cmd);
+ }
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ core_num, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_vm_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_status_op_set,
+ (cmdline_parse_inst_t *)&cmd_show_vm_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+ power_manager_init();
+ cl = cmdline_stdin_new(main_ctx, "vmpower> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/vm_power_cli.h b/examples/vm_power_manager/vm_power_cli.h
new file mode 100644
index 0000000..deccd51
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.h
@@ -0,0 +1,47 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 03/10] CPU Frequency Power Management(Host).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 02/10] VM Power Management CLI(Host) Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 04/10] " Alan Carew
` (7 subsequent siblings)
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
A wrapper around librte_power, providing locking around the non-threadsafe
library, allowing for frequency changes based on core masks and core numbers
from both the CLI thread and epoll monitor thread.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/power_manager.c | 234 ++++++++++++++++++++++++++++++
examples/vm_power_manager/power_manager.h | 191 ++++++++++++++++++++++++
2 files changed, 425 insertions(+)
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
diff --git a/examples/vm_power_manager/power_manager.c b/examples/vm_power_manager/power_manager.c
new file mode 100644
index 0000000..ceca532
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.c
@@ -0,0 +1,234 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/types.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_power.h>
+#include <rte_spinlock.h>
+
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_POWER_MANAGER RTE_LOGTYPE_USER1
+
+#define POWER_SCALE_CORE(DIRECTION, core_num, ret) do { \
+ if (!(global_enabled_cpus & (1ULL << core_num))) \
+ return -1; \
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl); \
+ ret = rte_power_freq_##DIRECTION(core_num); \
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl); \
+} while (0)
+
+#define POWER_SCALE_MASK(DIRECTION, core_mask, ret) do { \
+ int i; \
+ for (i = 0; core_mask; core_mask &= ~(1 << i++)) { \
+ if (!(global_enabled_cpus & (1ULL << i))) \
+ return -1; \
+ rte_spinlock_lock(&global_core_freq_info[i].power_sl); \
+ ret = rte_power_freq_##DIRECTION(i); \
+ rte_spinlock_unlock(&global_core_freq_info[i].power_sl); \
+ } \
+} while (0)
+
+struct freq_info {
+ rte_spinlock_t power_sl;
+ uint32_t freqs[RTE_MAX_LCORE_FREQS];
+ unsigned num_freqs;
+} __rte_cache_aligned;
+
+static struct freq_info global_core_freq_info[RTE_MAX_LCORE];
+
+static uint64_t global_enabled_cpus;
+
+#define SYSFS_CPU_PATH "/sys/devices/system/cpu/cpu%u/topology/core_id"
+
+static unsigned
+set_host_cpus_mask(void)
+{
+ char path[PATH_MAX];
+ unsigned i;
+ unsigned num_cpus = 0;
+ for (i = 0; i < RTE_MAX_LCORE; i++) {
+ snprintf(path, sizeof(path), SYSFS_CPU_PATH, i);
+ if (access(path, F_OK) == 0) {
+ global_enabled_cpus |= 1 << i;
+ num_cpus++;
+ } else
+ return num_cpus;
+ }
+ return num_cpus;
+}
+
+int
+power_manager_init(void)
+{
+ unsigned i, num_cpus;
+ uint64_t cpu_mask;
+ int ret = 0;
+
+ num_cpus = set_host_cpus_mask();
+ if (num_cpus == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to detected host CPUs, please "
+ "ensure that sufficient privileges exist to inspect sysfs\n");
+ return -1;
+ }
+
+ cpu_mask = global_enabled_cpus;
+ for (i = 0; cpu_mask; cpu_mask &= ~(1 << i++)) {
+ if (rte_power_init(i) < 0 || rte_power_freqs(i,
+ global_core_freq_info[i].freqs,
+ RTE_MAX_LCORE_FREQS) == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to initialize power manager "
+ "for core %u\n", i);
+ global_enabled_cpus &= ~(1 << i);
+ num_cpus--;
+ ret = -1;
+ }
+ rte_spinlock_init(&global_core_freq_info[i].power_sl);
+ }
+ RTE_LOG(INFO, POWER_MANAGER, "Detected %u host CPUs , enabled core mask:"
+ " 0x%"PRIx64"\n", num_cpus, global_enabled_cpus);
+ return ret;
+
+}
+
+uint32_t
+power_manager_get_current_frequency(unsigned core_num)
+{
+ uint32_t freq, index;
+
+ if (!(global_enabled_cpus & (1ULL << core_num)))
+ return 0;
+
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl);
+ index = rte_power_get_freq(core_num);
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl);
+ if (index >= RTE_MAX_LCORE)
+ freq = 0;
+ else
+ freq = global_core_freq_info[core_num].freqs[index];
+
+ return freq;
+}
+
+int
+power_manager_exit(void)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for (i = 0; global_enabled_cpus; global_enabled_cpus &= ~(1 << i++)) {
+ if (rte_power_exit(i) < 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to shutdown power manager "
+ "for core %u\n", i);
+ ret = -1;
+ }
+ }
+ global_enabled_cpus = 0;
+ return ret;
+}
+
+int
+power_manager_scale_mask_up(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(up, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_down(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(down, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_min(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(min, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_max(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(max, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_up(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(up, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_down(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(down, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_min(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(min, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_max(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(max, core_num, ret);
+ return ret;
+}
diff --git a/examples/vm_power_manager/power_manager.h b/examples/vm_power_manager/power_manager.h
new file mode 100644
index 0000000..0b2f2a0
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.h
@@ -0,0 +1,191 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef POWER_MANAGER_H_
+#define POWER_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management.
+ * Initializes resources and verifies the number of CPUs on the system.
+ * Wraps librte_power int rte_power_init(unsigned lcore_id);
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_init(void);
+
+/**
+ * Exit power management. Must be called prior to exiting the application.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_exit(void);
+
+/**
+ * Scale up the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_up(uint64_t core_mask);
+
+/**
+ * Scale down the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_down(uint64_t core_mask);
+
+/**
+ * Scale to the minimum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_min(uint64_t core_mask);
+
+/**
+ * Scale to the maximum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_max(uint64_t core_mask);
+
+/**
+ * Scale up frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_up(unsigned core_num);
+
+/**
+ * Scale down frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_down(unsigned core_num);
+
+/**
+ * Scale to minimum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_min(unsigned core_num);
+
+/**
+ * Scale to maximum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_max(unsigned core_num);
+
+/**
+ * Get the current freuency of the core specified by core_num
+ *
+ * @param core_num
+ * The core number to get the current frequency
+ *
+ * @return
+ * - 0 on error
+ * - >0 for current frequency.
+ */
+uint32_t power_manager_get_current_frequency(unsigned core_num);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* POWER_MANAGER_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 04/10] CPU Frequency Power Management(Host).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (2 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 03/10] CPU Frequency Power Management(Host) Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 05/10] VM communication channels for VM Power Management(Guest) Alan Carew
` (6 subsequent siblings)
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
A wrapper around librte_power, providing locking around the non-threadsafe
library, allowing for frequency changes based on core masks and core numbers
from both the CLI thread and epoll monitor thread.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/Makefile | 57 +++++++++++++++++++
examples/vm_power_manager/main.c | 113 +++++++++++++++++++++++++++++++++++++
examples/vm_power_manager/main.h | 52 +++++++++++++++++
3 files changed, 222 insertions(+)
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
new file mode 100644
index 0000000..a2f00ea
--- /dev/null
+++ b/examples/vm_power_manager/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli.c power_manager.c channel_manager.c
+SRCS-y += channel_monitor.c
+
+CFLAGS += -O3 -lvirt -I$(RTE_SDK)/lib/librte_power_vm/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
new file mode 100644
index 0000000..fdb9e73
--- /dev/null
+++ b/examples/vm_power_manager/main.c
@@ -0,0 +1,113 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_eal.h>
+#include <rte_launch.h>
+#include <rte_log.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "vm_power_cli.h"
+#include "main.h"
+
+static int
+run_monitor(__attribute__((unused)) void *arg)
+{
+ if (channel_manager_init(DEFAULT_HV_PATH) < 0) {
+ printf("Unable to initialize channel manager\n");
+ return -1;
+ }
+ if (channel_monitor_init() < 0) {
+ printf("Unable to initialize channel monitor\n");
+ return -1;
+ }
+ run_channel_monitor();
+ return 0;
+}
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ lcore_id = rte_get_next_lcore(-1, 1, 0);
+ if (lcore_id == RTE_MAX_LCORE) {
+ RTE_LOG(ERR, EAL, "A minimum of two cores are required to run "
+ "application\n");
+ return 0;
+ }
+ rte_eal_remote_launch(run_monitor, NULL, lcore_id);
+
+ run_cli(NULL);
+
+ rte_eal_mp_wait_lcore();
+ return 0;
+}
diff --git a/examples/vm_power_manager/main.h b/examples/vm_power_manager/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 05/10] VM communication channels for VM Power Management(Guest).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (3 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 04/10] " Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power " Alan Carew
` (5 subsequent siblings)
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
Allows for the opening of Virtio-Serial devices on a VM, where a DPDK
application can send packets to the host based monitor. The packet formatted is
specified in channel_commands.h
Each device appears as a serial device in path
/dev/virtio-ports/virtio.serial.port.<agent_type>.<lcore_num> where each lcore
in a DPDK application has exclusive to a device/channel.
Each channel is opened in non-blocking mode, after a successful open a test
packet is send to the host to ensure the host side is monitoring.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power_vm/guest_channel.c | 150 ++++++++++++++++++++++++++++++++++++
lib/librte_power_vm/guest_channel.h | 89 +++++++++++++++++++++
2 files changed, 239 insertions(+)
create mode 100644 lib/librte_power_vm/guest_channel.c
create mode 100644 lib/librte_power_vm/guest_channel.h
diff --git a/lib/librte_power_vm/guest_channel.c b/lib/librte_power_vm/guest_channel.c
new file mode 100644
index 0000000..8baa20a
--- /dev/null
+++ b/lib/librte_power_vm/guest_channel.c
@@ -0,0 +1,150 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+#include <fcntl.h>
+#include <string.h>
+#include <errno.h>
+
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+static int global_fds[RTE_MAX_LCORE];
+
+int
+guest_channel_host_connect(const char *path, unsigned lcore_id)
+{
+ int flags, ret;
+ struct channel_packet pkt;
+ char fd_path[PATH_MAX];
+ int fd = -1;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ /* check if path is already open */
+ if (global_fds[lcore_id] != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is already open\n", lcore_id);
+ return -1;
+ }
+
+ snprintf(fd_path, PATH_MAX, "%s.%u", path, lcore_id);
+ RTE_LOG(INFO, GUEST_CHANNEL, "Opening channel '%s' for lcore %u\n",
+ fd_path, lcore_id);
+ fd = open(fd_path, O_RDWR);
+ if (fd < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Unable to to connect to '%s' with error "
+ "%s\n", fd_path, strerror(errno));
+ return -1;
+ }
+
+ flags = fcntl(fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on fcntl get flags for file %s\n",
+ fd_path);
+ return -1;
+ }
+
+ flags |= O_NONBLOCK;
+ if (fcntl(fd, F_SETFL, flags) < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on setting non-blocking mode for "
+ "file %s", fd_path);
+ return -1;
+ }
+ /* QEMU needs a delay after connection */
+ sleep(1);
+
+ /* Send a test packet, this command is ignored by the host, but a successful
+ * send indicates that the host endpoint is monitoring.
+ */
+ pkt.command = CPU_POWER_CONNECT;
+ global_fds[lcore_id] = fd;
+ ret = guest_channel_send_msg(&pkt, lcore_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Error on channel '%s' communications "
+ "test: %s\n", fd_path, strerror(ret));
+ close(fd);
+ global_fds[lcore_id] = 0;
+ return -1;
+ }
+ RTE_LOG(INFO, GUEST_CHANNEL, "Channel '%s' is now connected\n", fd_path);
+ return 0;
+}
+
+int
+guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id)
+{
+ int ret, buffer_len = sizeof(*pkt);
+ void *buffer = pkt;
+
+ if (global_fds[lcore_id] == 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
+ return -1;
+ }
+ while (buffer_len > 0) {
+ ret = write(global_fds[lcore_id], buffer, buffer_len);
+ if (ret == buffer_len)
+ return 0;
+ if (ret == -1) {
+ if (errno == EINTR)
+ continue;
+ return errno;
+ }
+ buffer = (char *)buffer + ret;
+ buffer_len -= ret;
+ }
+ return 0;
+}
+
+void
+guest_channel_host_disconnect(unsigned lcore_id)
+{
+ if (global_fds[lcore_id] == 0)
+ return;
+ close(global_fds[lcore_id]);
+ global_fds[lcore_id] = 0;
+}
+
+
diff --git a/lib/librte_power_vm/guest_channel.h b/lib/librte_power_vm/guest_channel.h
new file mode 100644
index 0000000..9e18af5
--- /dev/null
+++ b/lib/librte_power_vm/guest_channel.h
@@ -0,0 +1,89 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _GUEST_CHANNEL_H
+#define _GUEST_CHANNEL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <channel_commands.h>
+
+/**
+ * Connect to the Virtio-Serial VM end-point located in path. It is
+ * thread safe for unique lcore_ids. This function must be only called once from
+ * each lcore.
+ *
+ * @param path
+ * The path to the serial device on the filesystem
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int guest_channel_host_connect(const char *path, unsigned lcore_id);
+
+/**
+ * Disconnect from an already connected Virtio-Serial Endpoint.
+ *
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ */
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+/**
+ * Send a message contained in pkt over the Virtio-Serial to the host endpoint.
+ *
+ * @param pkt
+ * Pointer to a populated struct guest_agent_pkt
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on channel not connected.
+ * - errno on write to channel error.
+ */
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power for VM Power Management(Guest).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (4 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 05/10] VM communication channels for VM Power Management(Guest) Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 19:17 ` Neil Horman
2014-09-22 18:34 ` [dpdk-dev] [PATCH 07/10] Packet format for VM Power Management(Host and Guest) Alan Carew
` (4 subsequent siblings)
10 siblings, 1 reply; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
Re-using the host based librte_power API the alternate implementation uses
the guest channel API to forward request for frequency changes to the host
monitor.
A subset of the librte_power API is supported:
rte_power_init(unsigned lcore_id)
rte_power_exit(unsigned lcore_id)
rte_power_freq_up(unsigned lcore_id)
rte_power_freq_down(unsigned lcore_id)
rte_power_freq_min(unsigned lcore_id)
rte_power_freq_max(unsigned lcore_id)
The other unsupported APIs from librte_power return -ENOTSUP.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power_vm/Makefile | 49 ++++++++++++++
lib/librte_power_vm/rte_power.c | 146 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 195 insertions(+)
create mode 100644 lib/librte_power_vm/Makefile
create mode 100644 lib/librte_power_vm/rte_power.c
diff --git a/lib/librte_power_vm/Makefile b/lib/librte_power_vm/Makefile
new file mode 100644
index 0000000..284ec2c
--- /dev/null
+++ b/lib/librte_power_vm/Makefile
@@ -0,0 +1,49 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_power.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -fno-strict-aliasing
+CFLAGS += -I$(RTE_SDK)/lib/librte_power/
+
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_POWER_VM) := guest_channel.c rte_power.c
+
+# install this header file
+SYMLINK-y-include := ../librte_power/rte_power.h
+
+# this lib needs eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_POWER) += lib/librte_eal
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_power_vm/rte_power.c b/lib/librte_power_vm/rte_power.c
new file mode 100644
index 0000000..1ce3fb0
--- /dev/null
+++ b/lib/librte_power_vm/rte_power.c
@@ -0,0 +1,146 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <errno.h>
+#include <string.h>
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+#include "rte_power.h"
+
+#define RTE_LOGTYPE_POWER_VM RTE_LOGTYPE_USER1
+
+#define FD_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+static struct channel_packet pkt[RTE_MAX_LCORE];
+
+
+int
+rte_power_init(unsigned lcore_id)
+{
+ pkt[lcore_id].command = CPU_POWER;
+ pkt[lcore_id].resource_id = lcore_id;
+ return guest_channel_host_connect(FD_PATH, lcore_id);
+}
+
+int
+rte_power_exit(unsigned lcore_id)
+{
+ guest_channel_host_disconnect(lcore_id);
+ return 0;
+}
+
+uint32_t
+rte_power_freqs(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t *freqs,
+ __attribute__((unused)) uint32_t num)
+{
+ RTE_LOG(ERR, POWER_VM, "rte_power_freqs is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+uint32_t
+rte_power_get_freq(__attribute__((unused)) unsigned lcore_id)
+{
+ RTE_LOG(ERR, POWER_VM, "rte_power_get_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+int
+rte_power_set_freq(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t index)
+{
+ RTE_LOG(ERR, POWER_VM, "rte_power_set_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+int
+rte_power_freq_up(unsigned lcore_id)
+{
+ int ret;
+ pkt[lcore_id].unit = CPU_SCALE_UP;
+
+ ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id);
+ if (ret <= 0)
+ return ret;
+ if (ret > 0)
+ RTE_LOG(DEBUG, POWER_VM, "Error sending message: %s\n", strerror(ret));
+ return -1;
+}
+
+int
+rte_power_freq_down(__attribute__((unused)) unsigned lcore_id)
+{
+ int ret;
+ pkt[lcore_id].unit = CPU_SCALE_DOWN;
+
+ ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id);
+ if (ret <= 0)
+ return ret;
+ if (ret > 0)
+ RTE_LOG(DEBUG, POWER_VM, "Error sending message: %s\n", strerror(ret));
+ return -1;
+}
+
+int
+rte_power_freq_max(__attribute__((unused)) unsigned lcore_id)
+{
+ int ret;
+ pkt[lcore_id].unit = CPU_SCALE_MAX;
+
+ ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id);
+ if (ret <= 0)
+ return ret;
+ if (ret > 0)
+ RTE_LOG(DEBUG, POWER_VM, "Error sending message: %s\n", strerror(ret));
+ return -1;
+}
+
+int
+rte_power_freq_min(__attribute__((unused)) unsigned lcore_id)
+{
+ int ret;
+ pkt[lcore_id].unit = CPU_SCALE_MIN;
+
+ ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id);
+ if (ret <= 0)
+ return ret;
+ if (ret > 0)
+ RTE_LOG(DEBUG, POWER_VM, "Error sending message: %s\n", strerror(ret));
+ return -1;
+}
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 07/10] Packet format for VM Power Management(Host and Guest).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (5 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power " Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 08/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
` (3 subsequent siblings)
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
Provides a command packet format for host and guest.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power_vm/channel_commands.h | 68 ++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 lib/librte_power_vm/channel_commands.h
diff --git a/lib/librte_power_vm/channel_commands.h b/lib/librte_power_vm/channel_commands.h
new file mode 100644
index 0000000..4ad65cf
--- /dev/null
+++ b/lib/librte_power_vm/channel_commands.h
@@ -0,0 +1,68 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_COMMANDS_H_
+#define CHANNEL_COMMANDS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <rte_config.h>
+
+#if RTE_MAX_LCORE > 64
+#error Maximum number of cores and channels is 64, overflow is guaranteed to \
+ cause problems.
+#endif
+
+#define CPU_POWER 1
+#define CPU_POWER_CONNECT 2
+
+#define CPU_SCALE_UP 1
+#define CPU_SCALE_DOWN 2
+#define CPU_SCALE_MAX 3
+#define CPU_SCALE_MIN 4
+
+struct channel_packet {
+ uint64_t resource_id; /* core_num, device */
+ uint32_t unit; /* scale down/up/min/max */
+ uint32_t command; /* Power, IO, etc */
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_COMMANDS_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 08/10] Build system integration for VM Power Management(Guest and Host)
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (6 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 07/10] Packet format for VM Power Management(Host and Guest) Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 09/10] VM Power Management Unit Tests(Guest) Alan Carew
` (2 subsequent siblings)
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
Add CONFIG_RTE_LIBRTE_POWER_VM to config/common_linuxapp, default=n
As both host and guest side rely on the same API(librte_power) but different
implementations, it requires the following configurations:
Host: CONFIG_RTE_LIBRTE_POWER_VM=n and Add CONFIG_RTE_LIBRTE_POWER=y
Guest: CONFIG_RTE_LIBRTE_POWER_VM=y and Add CONFIG_RTE_LIBRTE_POWER=n
When building for either the resulting library is called rte_power.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
config/common_linuxapp | 6 ++++++
lib/Makefile | 1 +
mk/rte.app.mk | 4 ++++
3 files changed, 11 insertions(+)
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 5bee910..fbecad3 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -332,6 +332,12 @@ CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64
#
+# Compile librte_power_vm
+#
+CONFIG_RTE_LIBRTE_POWER_VM=n
+CONFIG_RTE_LIBRTE_POWER_VM_DEBUG=n
+
+#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y
diff --git a/lib/Makefile b/lib/Makefile
index 10c5bb3..d291459 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -56,6 +56,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ACL) += librte_acl
DIRS-$(CONFIG_RTE_LIBRTE_NET) += librte_net
DIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += librte_ip_frag
DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
+DIRS-$(CONFIG_RTE_LIBRTE_POWER_VM) += librte_power_vm
DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
DIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += librte_kvargs
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 34dff2a..ce8c684 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -105,6 +105,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_POWER),y)
LDLIBS += -lrte_power
endif
+ifeq ($(CONFIG_RTE_LIBRTE_POWER_VM),y)
+LDLIBS += -lrte_power
+endif
+
ifeq ($(CONFIG_RTE_LIBRTE_ACL),y)
LDLIBS += -lrte_acl
endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 09/10] VM Power Management Unit Tests(Guest)
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (7 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 08/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 10/10] VM Power Management CLI(Guest) Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
app/test/Makefile | 1 +
app/test/autotest_data.py | 13 +++
app/test/test_power_vm.c | 215 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 229 insertions(+)
create mode 100644 app/test/test_power_vm.c
diff --git a/app/test/Makefile b/app/test/Makefile
index 37a3772..39dd08e 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -120,6 +120,7 @@ endif
SRCS-$(CONFIG_RTE_LIBRTE_METER) += test_meter.c
SRCS-$(CONFIG_RTE_LIBRTE_KNI) += test_kni.c
SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER_VM) += test_power_vm.c
SRCS-y += test_common.c
SRCS-$(CONFIG_RTE_LIBRTE_IVSHMEM) += test_ivshmem.c
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 878c72e..5c6b60b 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -425,6 +425,19 @@ non_parallel_test_group_list = [
]
},
{
+ "Prefix" : "power_vm",
+ "Memory" : "512",
+ "Tests" :
+ [
+ {
+ "Name" : "Power VM autotest",
+ "Command" : "power_vm_autotest",
+ "Func" : default_autotest,
+ "Report" : None,
+ },
+ ]
+},
+{
"Prefix" : "lpm6",
"Memory" : "512",
"Tests" :
diff --git a/app/test/test_power_vm.c b/app/test/test_power_vm.c
new file mode 100644
index 0000000..176fbec
--- /dev/null
+++ b/app/test/test_power_vm.c
@@ -0,0 +1,215 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <limits.h>
+#include <string.h>
+
+#include "test.h"
+
+#include <rte_power.h>
+
+#define TEST_POWER_VM_LCORE_ID 0U
+#define TEST_POWER_VM_LCORE_INVALID 64U
+
+static int
+test_power_vm(void)
+{
+ int ret;
+
+ /* Test initialisation of invalid lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_INVALID);
+ if (ret != -1) {
+ printf("rte_power_init unexpectedly succeeded on an invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test initialisation of previously initialised lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_init unexpectedly failed on valid lcore %u,"
+ "please ensure that the environment has been configured "
+ "correctly and test application is running on a VM\n",
+ TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_init(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_init unexpectedly succeeded on calling init twice on"
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency up of invalid lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 0) {
+ printf("rte_power_freq_up unexpectedly succeeded on invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Test frequency down of invalid lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 0) {
+ printf("rte_power_freq_down unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Test frequency min of invalid lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 0) {
+ printf("rte_power_freq_min unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Test frequency max of invalid lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 0) {
+ printf("rte_power_freq_max unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Test frequency up of valid lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_freq_up unexpectedly failed on valid lcore %u\n",
+ TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency down of valid lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_freq_down unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency min of valid lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_freq_min unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency max of valid lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_freq_max unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test unsupported rte_power_freqs */
+ ret = rte_power_freqs(TEST_POWER_VM_LCORE_ID, NULL, 0);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_freqs did not return the expected -ENOTSUP(%d) but "
+ "returned %d\n", -ENOTSUP, ret);
+ return -1;
+ }
+
+ /* Test unsupported rte_power_get_freq */
+ ret = rte_power_get_freq(TEST_POWER_VM_LCORE_ID);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_get_freq did not return the expected -ENOTSUP(%d) but"
+ " returned %d for lcore %u\n",
+ -ENOTSUP, ret, TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test unsupported rte_power_set_freq */
+ ret = rte_power_set_freq(TEST_POWER_VM_LCORE_ID, 0);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_set_freq did not return the expected -ENOTSUP(%d) but"
+ " returned %d for lcore %u\n",
+ -ENOTSUP, ret, TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test removing of an lcore */
+ ret = rte_power_exit(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_exit unexpectedly failed on valid lcore %u,"
+ "please ensure that the environment has been configured "
+ "correctly\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency up of previously removed lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_up unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency down of previously removed lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_down unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency min of previously removed lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_min unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency max of previously removed lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_max unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ return 0;
+}
+
+static struct test_command power_vm_cmd = {
+ .command = "power_vm_autotest",
+ .callback = test_power_vm,
+};
+REGISTER_TEST_COMMAND(power_vm_cmd);
+
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH 10/10] VM Power Management CLI(Guest).
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (8 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 09/10] VM Power Management Unit Tests(Guest) Alan Carew
@ 2014-09-22 18:34 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
10 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-22 18:34 UTC (permalink / raw)
To: dev
Provides a small sample application(guest_vm_power_mgr) to run on a VM.
The application is run by providing a core mask(-c) and number of memory
channels(-n). The core mask corresponds to the number of lcore channels to
attempt to open. A maximum of 64 channels per VM is allowed. The channels must
be monitored by the host.
After successful initialisation a CPU frequency command can be sent to the host
using:
set_cpu_freq <lcore_num> <up|down|min|max>.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/guest_cli/Makefile | 56 ++++++++
examples/vm_power_manager/guest_cli/main.c | 87 ++++++++++++
examples/vm_power_manager/guest_cli/main.h | 52 +++++++
.../guest_cli/vm_power_cli_guest.c | 155 +++++++++++++++++++++
.../guest_cli/vm_power_cli_guest.h | 55 ++++++++
5 files changed, 405 insertions(+)
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
new file mode 100644
index 0000000..c380c77
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -0,0 +1,56 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = guest_vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli_guest.c
+
+CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power_vm/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/guest_cli/main.c b/examples/vm_power_manager/guest_cli/main.c
new file mode 100644
index 0000000..2715778
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.c
@@ -0,0 +1,87 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+*/
+#include <signal.h>
+
+#include <rte_lcore.h>
+#include <rte_power.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "vm_power_cli_guest.h"
+#include "main.h"
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+
+}
+
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_init(lcore_id);
+ }
+ run_cli(NULL);
+
+ return 0;
+}
diff --git a/examples/vm_power_manager/guest_cli/main.h b/examples/vm_power_manager/guest_cli/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
new file mode 100644
index 0000000..e374af6
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
@@ -0,0 +1,155 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+#include <termios.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_lcore.h>
+
+#include <rte_power.h>
+
+#include "vm_power_cli_guest.h"
+
+
+#define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t lcore_id;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = rte_power_freq_up(res->lcore_id);
+ else if (!strcmp(res->cmd , "down"))
+ ret = rte_power_freq_down(res->lcore_id);
+ else if (!strcmp(res->cmd , "min"))
+ ret = rte_power_freq_min(res->lcore_id);
+ else if (!strcmp(res->cmd , "max"))
+ ret = rte_power_freq_max(res->lcore_id);
+ if (ret != 0)
+ cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ lcore_id, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+ cl = cmdline_stdin_new(main_ctx, "vmpower(guest)> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
new file mode 100644
index 0000000..0c4bdd5
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
@@ -0,0 +1,55 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "channel_commands.h"
+
+int guest_channel_host_connect(unsigned lcore_id);
+
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* Re: [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power for VM Power Management(Guest).
2014-09-22 18:34 ` [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power " Alan Carew
@ 2014-09-22 19:17 ` Neil Horman
2014-09-23 7:48 ` Carew, Alan
0 siblings, 1 reply; 97+ messages in thread
From: Neil Horman @ 2014-09-22 19:17 UTC (permalink / raw)
To: Alan Carew; +Cc: dev
On Mon, Sep 22, 2014 at 07:34:35PM +0100, Alan Carew wrote:
> Re-using the host based librte_power API the alternate implementation uses
> the guest channel API to forward request for frequency changes to the host
> monitor.
> A subset of the librte_power API is supported:
> rte_power_init(unsigned lcore_id)
> rte_power_exit(unsigned lcore_id)
> rte_power_freq_up(unsigned lcore_id)
> rte_power_freq_down(unsigned lcore_id)
> rte_power_freq_min(unsigned lcore_id)
> rte_power_freq_max(unsigned lcore_id)
>
> The other unsupported APIs from librte_power return -ENOTSUP.
>
> Signed-off-by: Alan Carew <alan.carew@intel.com>
> ---
> lib/librte_power_vm/Makefile | 49 ++++++++++++++
> lib/librte_power_vm/rte_power.c | 146 ++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 195 insertions(+)
> create mode 100644 lib/librte_power_vm/Makefile
> create mode 100644 lib/librte_power_vm/rte_power.c
>
NAK.
This is a bad design choice. Creating an alternate library with all the same
symbols in place prevents an application from compiling in support for both host
and guest power management in parallel (i.e. if an app wants to be able to do
power management in either environment, and only gets built once, it won't
work).
In fact, linking a statically built library with both CONFIG_RTE_LIBRTE_POWER=y
and CONFIG_RTE_LIBRTE_POWER_VM=y yields the following link-time build break:
LD test
/home/nhorman/git/dpdk/build/lib/librte_power.a(guest_channel.o): In function
`guest_channel_host_connect':
guest_channel.c:(.text+0x0): multiple definition of `guest_channel_host_connect'
/home/nhorman/git/dpdk/build/lib/librte_power.a(guest_channel.o):guest_channel.c:(.text+0x0):
first defined here
/home/nhorman/git/dpdk/build/lib/librte_power.a(guest_channel.o): In function
`guest_channel_send_msg':
guest_channel.c:(.text+0x370): multiple definition of `guest_channel_send_msg'
....
Ad nauseum.
What you should do is merge this functionality in with the existing librte power
library, and make the choice of implementation a run time decision, so theres
only a single public facing API symbol set, and both implementations can
coexist, getting chosen at run time (via initialization config option,
environment detection, etc). Konstantin and I had a simmilar discussion
regarding the ACL library and the use of the match function. I think we came up
with some reasonably performant solutions.
Neil
^ permalink raw reply [flat|nested] 97+ messages in thread
* Re: [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power for VM Power Management(Guest).
2014-09-22 19:17 ` Neil Horman
@ 2014-09-23 7:48 ` Carew, Alan
0 siblings, 0 replies; 97+ messages in thread
From: Carew, Alan @ 2014-09-23 7:48 UTC (permalink / raw)
To: Neil Horman; +Cc: dev
Hi Neil,
> -----Original Message-----
> From: Neil Horman [mailto:nhorman@tuxdriver.com]
> Sent: Monday, September 22, 2014 8:18 PM
> To: Carew, Alan
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 06/10] Alternate implementation of
> librte_power for VM Power Management(Guest).
>
> On Mon, Sep 22, 2014 at 07:34:35PM +0100, Alan Carew wrote:
> > Re-using the host based librte_power API the alternate implementation uses
> > the guest channel API to forward request for frequency changes to the host
> > monitor.
> > A subset of the librte_power API is supported:
> > rte_power_init(unsigned lcore_id)
> > rte_power_exit(unsigned lcore_id)
> > rte_power_freq_up(unsigned lcore_id)
> > rte_power_freq_down(unsigned lcore_id)
> > rte_power_freq_min(unsigned lcore_id)
> > rte_power_freq_max(unsigned lcore_id)
> >
> > The other unsupported APIs from librte_power return -ENOTSUP.
> >
> > Signed-off-by: Alan Carew <alan.carew@intel.com>
> > ---
> > lib/librte_power_vm/Makefile | 49 ++++++++++++++
> > lib/librte_power_vm/rte_power.c | 146
> ++++++++++++++++++++++++++++++++++++++++
> > 2 files changed, 195 insertions(+)
> > create mode 100644 lib/librte_power_vm/Makefile
> > create mode 100644 lib/librte_power_vm/rte_power.c
> >
> NAK.
> This is a bad design choice. Creating an alternate library with all the same
> symbols in place prevents an application from compiling in support for both host
> and guest power management in parallel (i.e. if an app wants to be able to do
> power management in either environment, and only gets built once, it won't
> work).
>
> In fact, linking a statically built library with both CONFIG_RTE_LIBRTE_POWER=y
> and CONFIG_RTE_LIBRTE_POWER_VM=y yields the following link-time build
> break:
>
> LD test
> /home/nhorman/git/dpdk/build/lib/librte_power.a(guest_channel.o): In
> function
> `guest_channel_host_connect':
> guest_channel.c:(.text+0x0): multiple definition of
> `guest_channel_host_connect'
> /home/nhorman/git/dpdk/build/lib/librte_power.a(guest_channel.o):guest_cha
> nnel.c:(.text+0x0):
> first defined here
> /home/nhorman/git/dpdk/build/lib/librte_power.a(guest_channel.o): In
> function
> `guest_channel_send_msg':
> guest_channel.c:(.text+0x370): multiple definition of `guest_channel_send_msg'
> ....
> Ad nauseum.
>
> What you should do is merge this functionality in with the existing librte power
> library, and make the choice of implementation a run time decision, so theres
> only a single public facing API symbol set, and both implementations can
> coexist, getting chosen at run time (via initialization config option,
> environment detection, etc). Konstantin and I had a simmilar discussion
> regarding the ACL library and the use of the match function. I think we came up
> with some reasonably performant solutions.
>
> Neil
Makes sense, I'll take a look at runtime configuration options and post a V2.
Thanks,
Alan
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 00/10] VM Power Management
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
` (9 preceding siblings ...)
2014-09-22 18:34 ` [dpdk-dev] [PATCH 10/10] VM Power Management CLI(Guest) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
` (11 more replies)
10 siblings, 12 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
Virtual Machine Power Management.
The following patches add two DPDK sample applications and an alternate
implementation of librte_power for use in virtualized environments.
The idea is to provide librte_power functionality from within a VM to address
the lack of MSRs to facilitate frequency changes from within a VM.
It is ideally suited for Haswell which provides per core frequency scaling.
The current librte_power affects frequency changes via the acpi-cpufreq
'userspace' power governor, accessed via sysfs.
General Overview:(more information in each patch that follows).
The VM Power Management solution provides two components:
1)VM: Allows for the a DPDK application in a VM to reuse the librte_power
interface. Each lcore opens a Virto-Serial endpoint channel to the host,
where the re-implementation of librte_power simply forwards the requests for
frequency change to a host based monitor. The host monitor itself uses
librte_power.
Each lcore channel corresponds to a
serial device '/dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>'
which is opened in non-blocking mode.
While each Virtual CPU can be mapped to multiple physical CPUs it is
recommended that each vCPU should be mapped to a single core only.
2)Host: The host monitor is managed by a CLI, it allows for adding qemu/KVM
virtual machines and associated channels to the monitor, manually changing
CPU frequency, inspecting the state of VMs, vCPU to pCPU pinning and managing
channels.
Host channel endpoints are Virto-Serial endpoints configured as AF_UNIX file
sockets which follow a specific naming convention
i.e /tmp/powermonitor/<vm_name>.<channel_number>,
each channel has an 1:1 mapping to a VM endpoint
i.e. /dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>
Host channel endpoints are opened in non-blocking mode and are monitored via epoll.
Requests over each channel to change frequency are forwarded to the original
librte_power.
Channels must be manually configured as qemu-kvm command line arguments or
libvirt domain definition(xml) e.g.
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<channel type='unix'>
<source mode='bind' path='/tmp/powermonitor/<vm_name>.<channel_num>'/>
<target type='virtio' name='virtio.serial.port.poweragent.<channel_num>/>
<address type='virtio-serial' controller='0' bus='0' port='<N>'/>
</channel>
Where multiple channels can be configured by specifying multiple <channel>
elements, by replacing <vm_name>, <channel_num>.
<N>(port number) should be incremented by 1 for each new channel element.
More information on Virtio-Serial can be found here:
http://fedoraproject.org/wiki/Features/VirtioSerial
To enable the Hypervisor creation of channels, the host endpoint directory
must be created with qemu permissions:
mkdir /tmp/powermonitor
chown qemu:qemu /tmp/powermonitor
The host application runs on two separate lcores:
Core N) CLI: For management of Virtual Machines adding channels to Monitor thread,
inspecting state and manually setting CPU frequency [PATCH 02/09]
Core N+1) Monitor Thread: An epoll based infinite loop that waits on channel events
from VMs and calls the corresponding librte_power functions.
A sample application is also provided to run on Virtual Machines, this
application provides a CLI to manually set the frequency of a
vCPU[PATCH 08/09]
The current l3fwd-power sample application can also be run on a VM.
Changes in V2:
Runtime selection of librte_power implementations.
Updated Unit tests to cover librte_power changes.
PATCH[0/3] was sent twice, again as PATCH[0/4]
Miscellaneous fixes.
Alan Carew (10):
Channel Manager and Monitor for VM Power Management(Host).
VM Power Management CLI(Host).
CPU Frequency Power Management(Host).
VM Power Management application and Makefile.
VM Power Management CLI(Guest).
VM communication channels for VM Power Management(Guest).
librte_power common interface for Guest and Host
Packet format for VM Power Management(Host and Guest).
Build system integration for VM Power Management(Guest and Host)
VM Power Management Unit Tests
app/test/Makefile | 3 +-
app/test/autotest_data.py | 26 +
app/test/test_power.c | 445 ++------------
app/test/test_power_acpi_cpufreq.c | 544 +++++++++++++++++
app/test/test_power_kvm_vm.c | 308 ++++++++++
examples/vm_power_manager/Makefile | 57 ++
examples/vm_power_manager/channel_manager.c | 645 +++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 273 +++++++++
examples/vm_power_manager/channel_monitor.c | 228 ++++++++
examples/vm_power_manager/channel_monitor.h | 102 ++++
examples/vm_power_manager/guest_cli/Makefile | 56 ++
examples/vm_power_manager/guest_cli/main.c | 86 +++
examples/vm_power_manager/guest_cli/main.h | 52 ++
.../guest_cli/vm_power_cli_guest.c | 155 +++++
.../guest_cli/vm_power_cli_guest.h | 55 ++
examples/vm_power_manager/main.c | 113 ++++
examples/vm_power_manager/main.h | 52 ++
examples/vm_power_manager/power_manager.c | 244 ++++++++
examples/vm_power_manager/power_manager.h | 186 ++++++
examples/vm_power_manager/vm_power_cli.c | 568 ++++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 ++
lib/librte_power/Makefile | 3 +-
lib/librte_power/channel_commands.h | 68 +++
lib/librte_power/guest_channel.c | 162 ++++++
lib/librte_power/guest_channel.h | 89 +++
lib/librte_power/rte_power.c | 540 +++--------------
lib/librte_power/rte_power.h | 120 +++-
lib/librte_power/rte_power_acpi_cpufreq.c | 545 +++++++++++++++++
lib/librte_power/rte_power_acpi_cpufreq.h | 192 ++++++
lib/librte_power/rte_power_common.h | 39 ++
lib/librte_power/rte_power_kvm_vm.c | 160 +++++
lib/librte_power/rte_power_kvm_vm.h | 179 ++++++
32 files changed, 5430 insertions(+), 912 deletions(-)
create mode 100644 app/test/test_power_acpi_cpufreq.c
create mode 100644 app/test/test_power_kvm_vm.c
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
create mode 100644 lib/librte_power/channel_commands.h
create mode 100644 lib/librte_power/guest_channel.c
create mode 100644 lib/librte_power/guest_channel.h
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
create mode 100644 lib/librte_power/rte_power_common.h
create mode 100644 lib/librte_power/rte_power_kvm_vm.c
create mode 100644 lib/librte_power/rte_power_kvm_vm.h
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 01/10] Channel Manager and Monitor for VM Power Management(Host).
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 02/10] VM Power Management CLI(Host) Alan Carew
` (10 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
The manager is responsible for adding communications channels to the Monitor
thread, tracking and reporting VM state and employs the libvirt API for
synchronization with the KVM Hypervisor. The manager interacts with the
Hypervisor to discover the mapping of virtual CPUS(vCPUs) to the host
physical CPUS(pCPUs) and to inspect the VM running state.
The manager provides the following functionality to the CLI:
1) Connect to a libvirtd instance, default: qemu:///system
2) Add a VM to an internal list, each VM is identified by a "name" which must
correspond a valid libvirt Domain Name.
3) Add communication channels associated with a VM to the epoll based Monitor
thread.
The channels must exist and be in the form of:
/tmp/powermonitor/<vm_name>.<channel_number>. Each channel is a
Virtio-Serial endpoint configured as an AF_UNIX file socket and opened in
non-blocking mode.
Each VM can have a maximum of 64 channels associated with it.
4) Disable or re-enable VM communication channels, channels once added to the
Monitor thread remain in that threads control, however acting on channel
requests can be disabled and renabled via CLI.
The monitor is an epoll based infinite loop running in a separate thread that
waits on channel events from VMs and calls the corresponding functions. Channel
definitions from the manager are registered via the epoll event opaque pointer
when calling epoll_ctl(EPOLL_CTL_ADD), this allows for obtaining the channels
file descriptor for reading EPOLLIN events and mapping the vCPU to pCPU(s)
associated with a request from a particular VM.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/channel_manager.c | 645 ++++++++++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 273 ++++++++++++
examples/vm_power_manager/channel_monitor.c | 228 ++++++++++
examples/vm_power_manager/channel_monitor.h | 102 +++++
4 files changed, 1248 insertions(+)
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
diff --git a/examples/vm_power_manager/channel_manager.c b/examples/vm_power_manager/channel_manager.c
new file mode 100644
index 0000000..fdb0ea5
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.c
@@ -0,0 +1,645 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+
+#include <rte_config.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_log.h>
+#include <rte_atomic.h>
+#include <rte_spinlock.h>
+
+#include <libvirt/libvirt.h>
+
+#include "channel_manager.h"
+#include "channel_commands.h"
+#include "channel_monitor.h"
+
+
+#define SOCKET_PATH "/tmp/powermonitor/"
+
+#define RTE_LOGTYPE_CHANNEL_MANAGER RTE_LOGTYPE_USER1
+
+#define ITERATIVE_BITMASK_CHECK_64(mask_u64b, i) \
+ for (i = 0; mask_u64b; mask_u64b &= ~(1ULL << i++)) \
+ if ((mask_u64b >> i) & 1) \
+
+/* Global pointer to libvirt connection */
+static virConnectPtr global_vir_conn_ptr;
+
+/*
+ * Represents a single Virtual Machine
+ */
+struct virtual_machine_info {
+ char name[MAX_NAME_LEN];
+ uint64_t pcpu_mask[MAX_VCPU];
+ struct channel_info *channels[MAX_VM_CHANNELS];
+ uint64_t channel_mask;
+ uint8_t num_channels;
+ enum vm_status status;
+ virDomainPtr domainPtr;
+ virDomainInfo info;
+ rte_spinlock_t config_spinlock;
+ LIST_ENTRY(virtual_machine_info) vms_info;
+};
+
+LIST_HEAD(, virtual_machine_info) vm_list_head;
+
+static struct virtual_machine_info *
+find_domain_by_name(const char *name)
+{
+ struct virtual_machine_info *info;
+ LIST_FOREACH(info, &vm_list_head, vms_info) {
+ if (!strncmp(info->name, name, MAX_NAME_LEN-1))
+ return info;
+ }
+ return NULL;
+}
+
+static void
+disconnect_hypervisor(void)
+{
+ if (global_vir_conn_ptr != NULL) {
+ virConnectClose(global_vir_conn_ptr);
+ global_vir_conn_ptr = NULL;
+ }
+}
+
+static int
+connect_hypervisor(const char *path)
+{
+ if (global_vir_conn_ptr != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error connecting to %s, connection"
+ "already established\n", path);
+ return -1;
+ }
+ global_vir_conn_ptr = virConnectOpen(path);
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error failed to open connection to "
+ "Hypervisor '%s'\n", path);
+ return -1;
+ }
+ return 0;
+}
+
+static int
+update_pcpus_mask(struct virtual_machine_info *vm_info)
+{
+ size_t maplen = VIR_CPU_MAPLEN(RTE_MAX_LCORE);
+ unsigned char cpumap[RTE_MAX_LCORE*maplen];
+ unsigned int i, j;
+
+ if (virDomainGetVcpuPinInfo(vm_info->domainPtr,
+ vm_info->info.nrVirtCpu,
+ cpumap,
+ maplen,
+ VIR_DOMAIN_DEVICE_MODIFY_CURRENT) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting Vcpu Pin Info\n");
+ return -1;
+ }
+ for (i = 0; i < vm_info->info.nrVirtCpu; i++) {
+ vm_info->pcpu_mask[i] = 0;
+ for (j = 0; j < maplen; j++)
+ vm_info->pcpu_mask[i] += VIR_CPU_USABLE(cpumap, maplen, i, j);
+ }
+ return 0;
+}
+
+uint64_t
+get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu)
+{
+ struct virtual_machine_info *vm_info =
+ (struct virtual_machine_info *)chan_info->priv_info;
+ return vm_info->pcpu_mask[vcpu];
+}
+
+static inline int
+channel_exists(struct virtual_machine_info *vm_info, unsigned int channel_num)
+{
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ if (vm_info->channel_mask & (1ULL << channel_num)) {
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 1;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+int
+add_vm(const char *vm_name)
+{
+ struct virtual_machine_info *new_domain;
+ virDomainPtr dom_ptr;
+
+ if (find_domain_by_name(vm_name) != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add VM: VM '%s' "
+ "already exists\n", vm_name);
+ return -1;
+ }
+
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "No connection to hypervisor exists\n");
+ return -1;
+ }
+ dom_ptr = virDomainLookupByName(global_vir_conn_ptr, vm_name);
+ if (dom_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error on VM lookup with libvirt: "
+ "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+
+ new_domain = rte_malloc("virtual_machine_info", sizeof(*new_domain),
+ CACHE_LINE_SIZE);
+ if (new_domain == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to allocate memory for VM "
+ "info\n");
+ return -1;
+ }
+ new_domain->domainPtr = dom_ptr;
+ if (virDomainGetInfo(new_domain->domainPtr, &new_domain->info) != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to get libvirt VM info\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ if (new_domain->info.nrVirtCpu > MAX_VCPU) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error the number of virtual CPUs(%u) is "
+ "greater than allowable(%d)\n", new_domain->info.nrVirtCpu,
+ MAX_VCPU);
+ rte_free(new_domain);
+ return -1;
+ }
+ if (update_pcpus_mask(new_domain) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting physical CPU pinning\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ strncpy(new_domain->name, vm_name, sizeof(new_domain->name));
+ new_domain->channel_mask = 0;
+ new_domain->num_channels = 0;
+
+ if (!virDomainIsActive(dom_ptr))
+ new_domain->status = VM_INACTIVE;
+ else
+ new_domain->status = VM_ACTIVE;
+
+ rte_spinlock_init(&(new_domain->config_spinlock));
+ LIST_INSERT_HEAD(&vm_list_head, new_domain, vms_info);
+ return 0;
+}
+
+static int
+open_non_blocking_channel(struct channel_info *info)
+{
+ int ret, flags;
+ struct sockaddr_un sock_addr;
+ fd_set soc_fd_set;
+ struct timeval tv;
+
+ info->fd = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (info->fd == -1) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error(%s) creating socket for '%s'\n",
+ strerror(errno),
+ info->channel_path);
+ return -1;
+ }
+ sock_addr.sun_family = AF_UNIX;
+ memcpy(&sock_addr.sun_path, info->channel_path,
+ strlen(info->channel_path)+1);
+
+ /* Get current flags */
+ flags = fcntl(info->fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) fcntl get flags socket for"
+ "'%s'\n", strerror(errno), info->channel_path);
+ return 1;
+ }
+ /* Set to Non Blocking */
+ flags |= O_NONBLOCK;
+ if (fcntl(info->fd, F_SETFL, flags) < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) setting non-blocking "
+ "socket for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ ret = connect(info->fd, (struct sockaddr *)&sock_addr,
+ sizeof(sock_addr));
+ if (ret < 0) {
+ /* ECONNREFUSED error is given when VM is not active */
+ if (errno == ECONNREFUSED) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "VM is not active or has not "
+ "activated its endpoint to channel %s\n",
+ info->channel_path);
+ return -1;
+ }
+ /* Wait for tv_sec if in progress */
+ else if (errno == EINPROGRESS) {
+ tv.tv_sec = 2;
+ tv.tv_usec = 0;
+ FD_ZERO(&soc_fd_set);
+ FD_SET(info->fd, &soc_fd_set);
+ if (select(info->fd+1, NULL, &soc_fd_set, NULL, &tv) > 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Timeout or error on channel "
+ "'%s'\n", info->channel_path);
+ return -1;
+ }
+ } else {
+ /* Any other error */
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) connecting socket"
+ " for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int
+setup_channel_info(struct virtual_machine_info **vm_info_dptr,
+ struct channel_info **chan_info_dptr, unsigned channel_num)
+{
+ struct channel_info *chan_info = *chan_info_dptr;
+ struct virtual_machine_info *vm_info = *vm_info_dptr;
+
+ chan_info->channel_num = channel_num;
+ chan_info->priv_info = (void *)vm_info;
+ chan_info->status = CHANNEL_DISCONNECTED;
+ if (open_non_blocking_channel(chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could not open channel: "
+ "'%s' for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+ }
+ if (add_channel_to_monitor(&chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could add channel: "
+ "'%s' to epoll ctl for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+
+ }
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->num_channels++;
+ vm_info->channel_mask |= 1ULL << channel_num;
+ vm_info->channels[channel_num] = chan_info;
+ chan_info->status = CHANNEL_CONNECTED;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+int
+add_all_channels(const char *vm_name)
+{
+ DIR *d;
+ struct dirent *dir;
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char *token, *remaining, *tail_ptr;
+ char socket_name[PATH_MAX];
+ unsigned channel_num;
+ int num_channels_enabled = 0;
+
+ /* verify VM exists */
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' not found"
+ " during channel discovery\n", vm_name);
+ return 0;
+ }
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = VM_INACTIVE;
+ return 0;
+ }
+ d = opendir(SOCKET_PATH);
+ if (d == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error opening directory '%s': %s\n",
+ SOCKET_PATH, strerror(errno));
+ return -1;
+ }
+ while ((dir = readdir(d)) != NULL) {
+ if (!strncmp(dir->d_name, ".", 1) ||
+ !strncmp(dir->d_name, "..", 2))
+ continue;
+
+ snprintf(socket_name, sizeof(socket_name), "%s", dir->d_name);
+ remaining = socket_name;
+ /* Extract vm_name from "<vm_name>.<channel_num>" */
+ token = strsep(&remaining, ".");
+ if (remaining == NULL)
+ continue;
+ if (strncmp(vm_name, token, MAX_NAME_LEN))
+ continue;
+
+ /* remaining should contain only <channel_num> */
+ errno = 0;
+ channel_num = (unsigned int)strtol(remaining, &tail_ptr, 0);
+ if ((errno != 0) || (remaining[0] == '\0') ||
+ (*tail_ptr != '\0') || tail_ptr == NULL) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Malformed channel name"
+ "'%s' found it should be in the form of "
+ "'<guest_name>.<channel_num>(decimal)'\n",
+ dir->d_name);
+ continue;
+ }
+ if (channel_num >= MAX_VM_CHANNELS) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Channel number(%u) is "
+ "greater than max allowable: %d, skipping '%s%s'\n",
+ channel_num, MAX_VM_CHANNELS-1, SOCKET_PATH,
+ dir->d_name);
+ continue;
+ }
+ /* if channel has not been added previously */
+ if (channel_exists(vm_info, channel_num))
+ continue;
+
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s%s'\n", SOCKET_PATH, dir->d_name);
+ continue;
+ }
+
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s", SOCKET_PATH,
+ dir->d_name);
+
+ if (setup_channel_info(&vm_info, &chan_info, channel_num) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+
+ num_channels_enabled++;
+ }
+ closedir(d);
+ return num_channels_enabled;
+}
+
+int
+add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list)
+{
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char socket_path[PATH_MAX];
+ unsigned i;
+ int num_channels_enabled = 0;
+
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = VM_INACTIVE;
+ return 0;
+ }
+ for (i = 0; i < len_channel_list; i++) {
+ if (i == MAX_VM_CHANNELS)
+ continue;
+ if (channel_exists(vm_info, channel_list[i])) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Channel already exists, skipping "
+ "'%s.%u'\n", vm_name, i);
+ continue;
+ }
+
+ snprintf(socket_path, sizeof(socket_path), "%s%s.%u", SOCKET_PATH,
+ vm_name, channel_list[i]);
+ errno = 0;
+ if (access(socket_path, F_OK) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channel path '%s' error: "
+ "%s\n", socket_path, strerror(errno));
+ continue;
+ }
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s'\n", socket_path);
+ continue;
+ }
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s.%u",
+ SOCKET_PATH, vm_name, channel_list[i]);
+ if (setup_channel_info(&vm_info, &chan_info, channel_list[i]) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+ num_channels_enabled++;
+
+ }
+ return num_channels_enabled;
+}
+
+int
+remove_channel(struct channel_info *chan_info)
+{
+ struct virtual_machine_info *vm_info;
+ close(chan_info->fd);
+ vm_info = (struct virtual_machine_info *)chan_info->priv_info;
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channel_mask &= ~(1ULL << chan_info->channel_num);
+ vm_info->num_channels--;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ rte_free(chan_info);
+ return 0;
+}
+
+int
+remove_vm(const char *vm_name)
+{
+ struct virtual_machine_info *vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM: VM '%s' "
+ "not found\n", vm_name);
+ return -1;
+ }
+ rte_spinlock_lock(&vm_info->config_spinlock);
+ if (vm_info->num_channels != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM '%s', there are "
+ "%"PRId8" channels still active\n",
+ vm_name, vm_info->num_channels);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ return -1;
+ }
+ LIST_REMOVE(vm_info, vms_info);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ rte_free(vm_info);
+ return 0;
+}
+
+int
+set_channel_status_all(const char *vm_name, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned int i;
+ uint64_t mask;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_CONNECTED || status == CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to disable channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ vm_info->channels[i]->status = status;
+ num_channels_changed++;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return num_channels_changed;
+
+}
+
+int
+set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_CONNECTED || status == CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+ for (i = 0; i < len_channel_list; i++) {
+ if (channel_exists(vm_info, channel_list[i])) {
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channels[channel_list[i]]->status = status;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ num_channels_changed++;
+ }
+ }
+ return num_channels_changed;
+}
+
+int
+get_info_vm(const char *vm_name, struct vm_info *info)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i, channel_num = 0;
+ uint64_t mask;
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+ info->status = VM_ACTIVE;
+ if (!virDomainIsActive(vm_info->domainPtr))
+ info->status = VM_INACTIVE;
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ info->channels[channel_num].channel_num = i;
+ memcpy(info->channels[channel_num].channel_path,
+ vm_info->channels[i]->channel_path, PATH_MAX);
+ info->channels[channel_num].status = vm_info->channels[i]->status;
+ info->channels[channel_num].fd = vm_info->channels[i]->fd;
+ channel_num++;
+ }
+ info->num_channels = channel_num;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ info->num_vcpus = vm_info->info.nrVirtCpu;
+
+ memcpy(info->name, vm_info->name, sizeof(vm_info->name));
+
+ if (update_pcpus_mask(vm_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' unable to update vCPU Pinning\n",
+ vm_name);
+ return -1;
+ }
+ for (i = 0; i < info->num_vcpus; i++) {
+ info->pcpu_mask[i] = vm_info->pcpu_mask[i];
+ }
+ return 0;
+}
+
+int
+channel_manager_init(const char *path)
+{
+ LIST_INIT(&vm_list_head);
+ if (connect_hypervisor(path) < 0)
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to initialize channel manager\n");
+ return 0;
+}
+
+void
+channel_manager_exit(void)
+{
+ unsigned int i;
+ uint64_t mask;
+ struct virtual_machine_info *vm_info;
+
+ LIST_FOREACH(vm_info, &vm_list_head, vms_info) {
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ remove_channel_from_monitor(vm_info->channels[i]);
+ close(vm_info->channels[i]->fd);
+ rte_free(vm_info->channels[i]);
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ LIST_REMOVE(vm_info, vms_info);
+ rte_free(vm_info);
+ }
+ disconnect_hypervisor();
+}
diff --git a/examples/vm_power_manager/channel_manager.h b/examples/vm_power_manager/channel_manager.h
new file mode 100644
index 0000000..d114201
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.h
@@ -0,0 +1,273 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MANAGER_H_
+#define CHANNEL_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <linux/limits.h>
+#include <rte_atomic.h>
+
+/* Maximum number of channels per VM */
+#define MAX_VM_CHANNELS 64
+
+/* Maximum name length including '\0' terminator */
+#define MAX_NAME_LEN 64
+
+/* Maximum number of virtual CPUs that can be assigned to a VM */
+#define MAX_VCPU 64
+
+/* Default Hypervisor Path for libvirt(qemu/KVM) */
+#define DEFAULT_HV_PATH "qemu:///system"
+
+/* Communication Channel Status */
+enum channel_status { CHANNEL_DISCONNECTED = 0, CHANNEL_CONNECTED,
+ CHANNEL_DISABLED, CHANNEL_PROCESSING};
+
+/* VM libvirt(qemu/KVM) connection status */
+enum vm_status { VM_INACTIVE = 0, VM_ACTIVE};
+
+/*
+ * Represents a single and exclusive VM channel that exists between a guest and
+ * the host.
+ */
+struct channel_info {
+ char channel_path[PATH_MAX]; /**< Path to host socket */
+ volatile uint32_t status; /**< Connection status(enum channel_status) */
+ int fd; /**< AF_UNIX socket fd */
+ unsigned int channel_num; /**< /tmp/powermonitor/<vm_name>.channel_num */
+ void *priv_info; /**< Pointer to private info, do not modify */
+};
+
+/* Represents a single VM instance used to return internal information about
+ * a VM */
+struct vm_info {
+ char name[MAX_NAME_LEN]; /**< VM name */
+ enum vm_status status; /**< libvirt status */
+ uint64_t pcpu_mask[MAX_VCPU]; /**< pCPU mask for each vCPU */
+ unsigned num_vcpus; /**< number of vCPUS */
+ struct channel_info channels[MAX_VM_CHANNELS];/**< Array of channel_info */
+ unsigned num_channels; /**< Number of channels */
+};
+
+/**
+ * Initialize the Channel Manager resources and connect to the Hypervisor
+ * specified in path.
+ * This must be successfully called first before calling any other functions.
+ * It must only be call once;
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_manager_init(const char *path);
+
+/**
+ * Free resources associated with the Channel Manager.
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * None
+ */
+void channel_manager_exit(void);
+
+/**
+ * Get the Physical CPU mask for VM lcore channel(vcpu), result is assigned to
+ * core_mask.
+ * It is not thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info
+ *
+ * @param vcpu
+ * The virtual CPU to query.
+ *
+ *
+ * @return
+ * - 0 on error.
+ * - >0 on success.
+ */
+uint64_t get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu);
+
+/**
+ * Add a VM as specified by name to the Channel Manager. The name must
+ * correspond to a valid libvirt domain name.
+ * This is required prior to adding channels.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_vm(const char *name);
+
+/**
+ * Remove a previously added Virtual Machine from the Channel Manager
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_vm(const char *name);
+
+/**
+ * Add all available channels to the VM as specified by name.
+ * Channels in the form of paths(/tmp/powermonitor/<vm_name>.<channel_number>
+ * will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - N the number of channels added for the VM
+ */
+int add_all_channels(const char *vm_name);
+
+/**
+ * Add the channel numbers in channel_list to the domain specified by name.
+ * Channels in the form of paths(/tmp/powermonitor/<vm_name>.<channel_number>
+ * will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel number to add
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned num_channels);
+
+/**
+ * Remove a channel definition from the channel manager. This must only be
+ * called from the channel monitor thread.
+ *
+ * @param chan_info
+ * Pointer to a valid struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel(struct channel_info *chan_info);
+
+/**
+ * For all channels associated with a Virtual Machine name, update the
+ * connection status. Valid states are CHANNEL_CONNECTED or CHANNEL_DISABLED
+ * only.
+ *
+ *
+ * @param name
+ * Virtual Machine name to modify all channels.
+ *
+ * @param status
+ * The status to set each channel
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int set_channel_status_all(const char *name, enum channel_status status);
+
+/**
+ * For all channels in channel_list associated with a Virtual Machine name
+ * update the connection status of each.
+ * Valid states are CHANNEL_CONNECTED or CHANNEL_DISABLED only.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel numbers to
+ * modify.
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels modified for the VM
+ * - 0 for error
+ */
+int set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status);
+
+/**
+ * Populates a pointer to struct vm_info associated with vm_name.
+ *
+ * @param vm_name
+ * The name of the virtual machine to lookup.
+ *
+ * @param vm_info
+ * Pointer to a struct vm_info, this must be allocated prior to calling this
+ * function.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int get_info_vm(const char *vm_name, struct vm_info *info);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_MANAGER_H_ */
diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
new file mode 100644
index 0000000..d30acbf
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <signal.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/epoll.h>
+#include <sys/queue.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_atomic.h>
+
+
+#include "channel_monitor.h"
+#include "channel_commands.h"
+#include "channel_manager.h"
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_CHANNEL_MONITOR RTE_LOGTYPE_USER1
+
+#define MAX_EVENTS 256
+
+
+static volatile unsigned run_loop = 1;
+static int global_event_fd;
+static struct epoll_event *global_events_list;
+
+void channel_monitor_exit(void)
+{
+ run_loop = 0;
+ rte_free(global_events_list);
+}
+
+static int
+process_request(struct channel_packet *pkt, struct channel_info *chan_info)
+{
+ uint64_t core_mask;
+
+ if (chan_info == NULL)
+ return -1;
+
+ if (rte_atomic32_cmpset(&(chan_info->status), CHANNEL_CONNECTED,
+ CHANNEL_PROCESSING) == 0)
+ return -1;
+
+ if (pkt->command == CPU_POWER) {
+ core_mask = get_pcpus_mask(chan_info, pkt->resource_id);
+ if (core_mask == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error get physical CPU mask for "
+ "channel '%s' using vCPU(%u)\n", chan_info->channel_path,
+ (unsigned)pkt->unit);
+ return -1;
+ }
+ if (__builtin_popcountll(core_mask) == 1) {
+
+ unsigned core_num = __builtin_ffsll(core_mask) - 1;
+
+ switch (pkt->unit) {
+ case(CPU_SCALE_MIN):
+ power_manager_scale_core_min(core_num);
+ break;
+ case(CPU_SCALE_MAX):
+ power_manager_scale_core_max(core_num);
+ break;
+ case(CPU_SCALE_DOWN):
+ power_manager_scale_core_down(core_num);
+ break;
+ case(CPU_SCALE_UP):
+ power_manager_scale_core_up(core_num);
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (pkt->unit) {
+ case(CPU_SCALE_MIN):
+ power_manager_scale_mask_min(core_mask);
+ break;
+ case(CPU_SCALE_MAX):
+ power_manager_scale_mask_max(core_mask);
+ break;
+ case(CPU_SCALE_DOWN):
+ power_manager_scale_mask_down(core_mask);
+ break;
+ case(CPU_SCALE_UP):
+ power_manager_scale_mask_up(core_mask);
+ break;
+ default:
+ break;
+ }
+
+ }
+ }
+ /* Return is not checked as channel status may have been set to DISABLED
+ * from management thread
+ */
+ rte_atomic32_cmpset(&(chan_info->status), CHANNEL_PROCESSING,
+ CHANNEL_CONNECTED);
+ return 0;
+
+}
+
+int
+add_channel_to_monitor(struct channel_info **chan_info)
+{
+ struct channel_info *info = *chan_info;
+ struct epoll_event event;
+ event.events = EPOLLIN;
+ event.data.ptr = info;
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_ADD, info->fd, &event) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to add channel '%s' "
+ "to epoll\n", info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+remove_channel_from_monitor(struct channel_info *chan_info)
+{
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_DEL, chan_info->fd, NULL) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to remove channel '%s' "
+ "from epoll\n", chan_info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+channel_monitor_init(void)
+{
+ global_event_fd = epoll_create1(0);
+ if (global_event_fd == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error creating epoll context with "
+ "error %s\n", strerror(errno));
+ return -1;
+ }
+ global_events_list = rte_malloc("epoll_events", sizeof(*global_events_list)
+ * MAX_EVENTS, CACHE_LINE_SIZE);
+ if (global_events_list == NULL) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to rte_malloc for"
+ "epoll events\n");
+ return -1;
+ }
+ return 0;
+}
+
+void
+run_channel_monitor(void)
+{
+ while (run_loop) {
+ int n_events, i;
+ n_events = epoll_wait(global_event_fd, global_events_list,
+ MAX_EVENTS, 1);
+ if (!run_loop)
+ break;
+ for (i = 0; i < n_events; i++) {
+ struct channel_info *chan_info = (struct channel_info *)
+ global_events_list[i].data.ptr;
+ if ((global_events_list[i].events & EPOLLERR) ||
+ (global_events_list[i].events & EPOLLHUP)) {
+ remove_channel(chan_info);
+ }
+ if (global_events_list[i].events & EPOLLIN) {
+
+ int n_bytes, err = 0;
+ struct channel_packet pkt;
+ void *buffer = &pkt;
+ int buffer_len = sizeof(pkt);
+ while (buffer_len > 0) {
+ n_bytes = read(chan_info->fd, buffer, buffer_len);
+ if (n_bytes == buffer_len)
+ break;
+ if (n_bytes == -1) {
+ err = errno;
+ RTE_LOG(DEBUG, CHANNEL_MONITOR, "Received error on "
+ "channel '%s' read: %s\n",
+ chan_info->channel_path, strerror(err));
+ remove_channel(chan_info);
+ break;
+ }
+ buffer = (char *)buffer + n_bytes;
+ buffer_len -= n_bytes;
+ }
+ if (!err)
+ process_request(&pkt, chan_info);
+ }
+ }
+ }
+}
diff --git a/examples/vm_power_manager/channel_monitor.h b/examples/vm_power_manager/channel_monitor.h
new file mode 100644
index 0000000..c138607
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.h
@@ -0,0 +1,102 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MONITOR_H_
+#define CHANNEL_MONITOR_H_
+
+#include "channel_manager.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Setup the Channel Monitor resources required to initialize epoll.
+ * Must be called first before calling other functions.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_monitor_init(void);
+
+/**
+ * Run the channel monitor, loops forever on on epoll_wait.
+ *
+ *
+ * @return
+ * None
+ */
+void run_channel_monitor(void);
+
+/**
+ * Exit the Channel Monitor, exiting the epoll_wait loop and events processing.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+void channel_monitor_exit(void);
+
+/**
+ * Add an open channel to monitor via epoll. A pointer to struct channel_info
+ * will be registered with epoll for event processing.
+ * It is thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info pointer.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_channel_to_monitor(struct channel_info **chan_info);
+
+/**
+ * Remove a previously added channel from epoll control.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel_from_monitor(struct channel_info *chan_info);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* CHANNEL_MONITOR_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 02/10] VM Power Management CLI(Host).
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 03/10] CPU Frequency Power Management(Host) Alan Carew
` (9 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
The CLI is used for administrating the channel monitor and manager and
manually setting the CPU frequency on the host.
Supports the following commands:
add_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
rm_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
add_channels [Fixed STRING]: add_channels <vm_name> <list>|all, add
communication channels for the specified VM, the virtio channels must be
enabled in the VM configuration(qemu/libvirt) and the associated VM must be
active. <list> is a comma-separated list of channel numbers to add, using the
keyword 'all' will attempt to add all channels for the VM
set_channel_status [Fixed STRING]:
set_channel_status <vm_name> <list>|all enabled|disabled, enable or disable
the communication channels in list(comma-seperated) for the specified VM,
alternatively list can be replaced with keyword 'all'. Disabled channels will
still receive packets on the host, however the commands they specify will be
ignored. Set status to 'enabled' to begin processing requests again.
show_vm [Fixed STRING]: show_vm <vm_name>, prints the information on the
specified VM(s), the information lists the number of vCPUS, the pinning to
pCPU(s) as a bit mask, along with any communication channels associated with
each VM
show_cpu_freq_mask [Fixed STRING]: show_cpu_freq_mask <mask>, Get the current
frequency for each core specified in the mask
set_cpu_freq_mask [Fixed STRING]: set_cpu_freq <core_mask> <up|down|min|max>,
Set the current frequency for the cores specified in <core_mask> by scaling
each up/down/min/max.
show_cpu_freq [Fixed STRING]: Get the current frequency for the specified core
set_cpu_freq [Fixed STRING]: set_cpu_freq <core_num> <up|down|min|max>,
Set the current frequency for the specified core by scaling up/down/min/max
quit [Fixed STRING]: close the application
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/vm_power_cli.c | 568 +++++++++++++++++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 +++
2 files changed, 615 insertions(+)
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
diff --git a/examples/vm_power_manager/vm_power_cli.c b/examples/vm_power_manager/vm_power_cli.c
new file mode 100644
index 0000000..33a4bcf
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.c
@@ -0,0 +1,568 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdio.h>
+#include <string.h>
+#include <termios.h>
+#include <errno.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+
+#include "vm_power_cli.h"
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "channel_commands.h"
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+struct cmd_show_vm_result {
+ cmdline_fixed_string_t show_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_show_vm_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_vm_result *res = parsed_result;
+ struct vm_info info;
+ unsigned i;
+
+ if (get_info_vm(res->vm_name, &info) != 0)
+ return;
+ cmdline_printf(cl, "VM: '%s', status = ", info.name);
+ if (info.status == VM_ACTIVE)
+ cmdline_printf(cl, "ACTIVE\n");
+ else
+ cmdline_printf(cl, "INACTIVE\n");
+ cmdline_printf(cl, "Channels %u\n", info.num_channels);
+ for (i = 0; i < info.num_channels; i++) {
+ cmdline_printf(cl, " [%u]: %s, status = ", i,
+ info.channels[i].channel_path);
+ switch (info.channels[i].status) {
+ case CHANNEL_CONNECTED:
+ cmdline_printf(cl, "CONNECTED\n");
+ break;
+ case CHANNEL_DISCONNECTED:
+ cmdline_printf(cl, "DISCONNECTED\n");
+ break;
+ case CHANNEL_DISABLED:
+ cmdline_printf(cl, "DISABLED\n");
+ break;
+ case CHANNEL_PROCESSING:
+ cmdline_printf(cl, "PROCESSING\n");
+ break;
+ default:
+ cmdline_printf(cl, "UNKNOWN\n");
+ break;
+ }
+ }
+ cmdline_printf(cl, "Virtual CPU(s): %u\n", info.num_vcpus);
+ for (i = 0; i < info.num_vcpus; i++) {
+ cmdline_printf(cl, " [%u]: Physical CPU Mask 0x%"PRIx64"\n", i,
+ info.pcpu_mask[i]);
+ }
+}
+
+cmdline_parse_token_string_t cmd_vm_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ show_vm, "show_vm");
+cmdline_parse_token_string_t cmd_show_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_show_vm_set = {
+ .f = cmd_show_vm_parsed,
+ .data = NULL,
+ .help_str = "show_vm <vm_name>, prints the information on the "
+ "specified VM(s), the information lists the number of vCPUS, the "
+ "pinning to pCPU(s) as a bit mask, along with any communication "
+ "channels associated with each VM",
+ .tokens = {
+ (void *)&cmd_vm_show,
+ (void *)&cmd_show_vm_name,
+ NULL,
+ },
+};
+
+struct cmd_vm_op_result {
+ cmdline_fixed_string_t op_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_vm_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vm_op_result *res = parsed_result;
+
+ if (!strcmp(res->op_vm, "add_vm")) {
+ if (add_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to add VM '%s'\n", res->vm_name);
+ } else if (remove_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to remove VM '%s'\n", res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_vm_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ op_vm, "add_vm#rm_vm");
+cmdline_parse_token_string_t cmd_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_vm_op_set = {
+ .f = cmd_vm_op_parsed,
+ .data = NULL,
+ .help_str = "add_vm|rm_vm <name>, add a VM for "
+ "subsequent operations with the CLI or remove a previously added "
+ "VM from the VM Power Manager",
+ .tokens = {
+ (void *)&cmd_vm_op,
+ (void *)&cmd_vm_name,
+ NULL,
+ },
+};
+
+/* *** VM channel operations *** */
+struct cmd_channels_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+};
+static void
+cmd_channels_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num, i;
+ int channels_added;
+ unsigned channel_list[MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_op_result *res = parsed_result;
+
+ if (!strcmp(res->channel_list, "all")) {
+ channels_added = add_all_channels(res->vm_name);
+ cmdline_printf(cl, "Added %d channels for VM '%s'\n",
+ channels_added, res->vm_name);
+ return;
+ }
+
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "Channel number '%u' exceeds the maximum number "
+ "of allowable channels(%u) for VM '%s'\n", channel_num,
+ MAX_VM_CHANNELS, res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ for (i = 0; i < num_channels; i++)
+ cmdline_printf(cl, "[%u]: Adding channel %u\n", i, channel_list[i]);
+
+ channels_added = add_channels(res->vm_name, channel_list,
+ num_channels);
+ cmdline_printf(cl, "Enabled %d channels for '%s'\n", channels_added,
+ res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ op, "add_channels");
+cmdline_parse_token_string_t cmd_channels_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ channel_list, NULL);
+
+cmdline_parse_inst_t cmd_channels_op_set = {
+ .f = cmd_channels_op_parsed,
+ .data = NULL,
+ .help_str = "add_channels <vm_name> <list>|all, add "
+ "communication channels for the specified VM, the "
+ "virtio channels must be enabled in the VM "
+ "configuration(qemu/libvirt) and the associated VM must be active. "
+ "<list> is a comma-seperated list of channel numbers to add, using "
+ "the keyword 'all' will attempt to add all channels for the VM",
+ .tokens = {
+ (void *)&cmd_channels_op,
+ (void *)&cmd_channels_vm_name,
+ (void *)&cmd_channels_list,
+ NULL,
+ },
+};
+
+struct cmd_channels_status_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+ cmdline_fixed_string_t status;
+};
+
+static void
+cmd_channels_status_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num;
+ int changed;
+ unsigned channel_list[MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_status_op_result *res = parsed_result;
+ enum channel_status status;
+
+ if (!strcmp(res->status, "enabled"))
+ status = CHANNEL_CONNECTED;
+ else
+ status = CHANNEL_DISABLED;
+
+ if (!strcmp(res->channel_list, "all")) {
+ changed = set_channel_status_all(res->vm_name, status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+ return;
+ }
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "%u exceeds the maximum number of allowable "
+ "channels(%u) for VM '%s'\n", channel_num, MAX_VM_CHANNELS,
+ res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ changed = set_channel_status(res->vm_name, channel_list, num_channels,
+ status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_status_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ op, "set_channel_status");
+cmdline_parse_token_string_t cmd_channels_status_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_status_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ channel_list, NULL);
+cmdline_parse_token_string_t cmd_channels_status =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ status, "enabled#disabled");
+
+cmdline_parse_inst_t cmd_channels_status_op_set = {
+ .f = cmd_channels_status_op_parsed,
+ .data = NULL,
+ .help_str = "set_channel_status <vm_name> <list>|all enabled|disabled, "
+ " enable or disable the communication channels in "
+ "list(comma-seperated) for the specified VM, alternatively list can"
+ " be replaced with keyword 'all'. Disabled channels will still "
+ "receive packets on the host, however the commands they specify "
+ "will be ignored. Set status to 'enabled' to begin processing "
+ "requests again.",
+ .tokens = {
+ (void *)&cmd_channels_status_op,
+ (void *)&cmd_channels_status_vm_name,
+ (void *)&cmd_channels_status_list,
+ (void *)&cmd_channels_status,
+ NULL,
+ },
+};
+
+/* *** CPU Frequency operations *** */
+struct cmd_show_cpu_freq_mask_result {
+ cmdline_fixed_string_t show_cpu_freq_mask;
+ uint64_t core_mask;
+};
+
+static void
+cmd_show_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_mask_result *res = parsed_result;
+ unsigned i;
+ uint64_t mask = res->core_mask;
+ uint32_t freq;
+ for (i = 0; mask; mask &= ~(1ULL << i++)) {
+ if ((mask >> i) & 1) {
+ freq = power_manager_get_current_frequency(i);
+ if (freq > 0)
+ cmdline_printf(cl, "Core %u: %"PRId32"\n", i, freq);
+ }
+ }
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ show_cpu_freq_mask, "show_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_show_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ core_mask, UINT64);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_mask_set = {
+ .f = cmd_show_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "show_cpu_freq_mask <mask>, Get the current frequency for each "
+ "core specified in the mask",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq_mask,
+ (void *)&cmd_show_cpu_freq_mask_core_mask,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_mask_result {
+ cmdline_fixed_string_t set_cpu_freq_mask;
+ uint64_t core_mask;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_cpu_freq_mask_result *res = parsed_result;
+ int ret = -1;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_mask_up(res->core_mask);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_mask_down(res->core_mask);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_mask_min(res->core_mask);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_mask_max(res->core_mask);
+ if (ret != 0) {
+ cmdline_printf(cl, "Error scaling core_mask(0x%"PRIx64") '%s' , not "
+ "all cores specified have been scaled\n",
+ res->core_mask, res->cmd);
+ };
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ set_cpu_freq_mask, "set_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_set_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ core_mask, UINT64);
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask_result =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_mask_set = {
+ .f = cmd_set_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_mask> <up|down|min|max>, Set the current "
+ "frequency for the cores specified in <core_mask> by scaling "
+ "each up/down/min/max.",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq_mask,
+ (void *)&cmd_set_cpu_freq_mask_core_mask,
+ (void *)&cmd_set_cpu_freq_mask_result,
+ NULL,
+ },
+};
+
+
+
+struct cmd_show_cpu_freq_result {
+ cmdline_fixed_string_t show_cpu_freq;
+ uint8_t core_num;
+};
+
+static void
+cmd_show_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_result *res = parsed_result;
+ uint32_t curr_freq = power_manager_get_current_frequency(res->core_num);
+ if (curr_freq == 0) {
+ cmdline_printf(cl, "Unable to get frequency for core %u\n",
+ res->core_num);
+ return;
+ }
+ cmdline_printf(cl, "Core %u frequency: %"PRId32"\n", res->core_num,
+ curr_freq);
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_result,
+ show_cpu_freq, "show_cpu_freq");
+
+cmdline_parse_token_num_t cmd_show_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_result,
+ core_num, UINT8);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_set = {
+ .f = cmd_show_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "Get the current frequency for the specified core",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq,
+ (void *)&cmd_show_cpu_freq_core_num,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t core_num;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_core_up(res->core_num);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_core_down(res->core_num);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_core_min(res->core_num);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_core_max(res->core_num);
+ if (ret != 0) {
+ cmdline_printf(cl, "Error scaling core(%u) '%s'\n", res->core_num,
+ res->cmd);
+ }
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ core_num, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_vm_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_status_op_set,
+ (cmdline_parse_inst_t *)&cmd_show_vm_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+ power_manager_init();
+ cl = cmdline_stdin_new(main_ctx, "vmpower> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/vm_power_cli.h b/examples/vm_power_manager/vm_power_cli.h
new file mode 100644
index 0000000..deccd51
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.h
@@ -0,0 +1,47 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 03/10] CPU Frequency Power Management(Host).
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 02/10] VM Power Management CLI(Host) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 04/10] VM Power Management application and Makefile Alan Carew
` (8 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
A wrapper around librte_power(using ACPI cpufreq), providing locking around the
non-threadsafe library, allowing for frequency changes based on core masks and
core numbers from both the CLI thread and epoll monitor thread.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/power_manager.c | 244 ++++++++++++++++++++++++++++++
examples/vm_power_manager/power_manager.h | 186 +++++++++++++++++++++++
2 files changed, 430 insertions(+)
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
diff --git a/examples/vm_power_manager/power_manager.c b/examples/vm_power_manager/power_manager.c
new file mode 100644
index 0000000..c736cd0
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.c
@@ -0,0 +1,244 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/types.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_power.h>
+#include <rte_spinlock.h>
+
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_POWER_MANAGER RTE_LOGTYPE_USER1
+
+#define POWER_SCALE_CORE(DIRECTION, core_num , ret) do { \
+ if (core_num > RTE_MAX_LCORE) \
+ return -1; \
+ if (!(global_enabled_cpus & (1ULL << core_num))) \
+ return -1; \
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl); \
+ ret = rte_power_freq_##DIRECTION(core_num); \
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl); \
+} while (0)
+
+#define POWER_SCALE_MASK(DIRECTION, core_mask, ret) do { \
+ int i; \
+ for (i = 0; core_mask; core_mask &= ~(1 << i++)) { \
+ if ((core_mask >> i) & 1) { \
+ if (!(global_enabled_cpus & (1ULL << i))) \
+ continue; \
+ rte_spinlock_lock(&global_core_freq_info[i].power_sl); \
+ if (rte_power_freq_##DIRECTION(i) != 1) \
+ ret = -1; \
+ rte_spinlock_unlock(&global_core_freq_info[i].power_sl); \
+ } \
+ } \
+} while (0)
+
+struct freq_info {
+ rte_spinlock_t power_sl;
+ uint32_t freqs[RTE_MAX_LCORE_FREQS];
+ unsigned num_freqs;
+} __rte_cache_aligned;
+
+static struct freq_info global_core_freq_info[RTE_MAX_LCORE];
+
+static uint64_t global_enabled_cpus;
+
+#define SYSFS_CPU_PATH "/sys/devices/system/cpu/cpu%u/topology/core_id"
+
+static unsigned
+set_host_cpus_mask(void)
+{
+ char path[PATH_MAX];
+ unsigned i;
+ unsigned num_cpus = 0;
+ for (i = 0; i < RTE_MAX_LCORE; i++) {
+ snprintf(path, sizeof(path), SYSFS_CPU_PATH, i);
+ if (access(path, F_OK) == 0) {
+ global_enabled_cpus |= 1 << i;
+ num_cpus++;
+ } else
+ return num_cpus;
+ }
+ return num_cpus;
+}
+
+int
+power_manager_init(void)
+{
+ unsigned i, num_cpus;
+ uint64_t cpu_mask;
+ int ret = 0;
+
+ num_cpus = set_host_cpus_mask();
+ if (num_cpus == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to detected host CPUs, please "
+ "ensure that sufficient privileges exist to inspect sysfs\n");
+ return -1;
+ }
+
+ cpu_mask = global_enabled_cpus;
+ for (i = 0; cpu_mask; cpu_mask &= ~(1 << i++)) {
+ if (rte_power_init(i) < 0 || rte_power_freqs(i,
+ global_core_freq_info[i].freqs,
+ RTE_MAX_LCORE_FREQS) == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to initialize power manager "
+ "for core %u\n", i);
+ global_enabled_cpus &= ~(1 << i);
+ num_cpus--;
+ ret = -1;
+ }
+ rte_spinlock_init(&global_core_freq_info[i].power_sl);
+ }
+ RTE_LOG(INFO, POWER_MANAGER, "Detected %u host CPUs , enabled core mask:"
+ " 0x%"PRIx64"\n", num_cpus, global_enabled_cpus);
+ return ret;
+
+}
+
+uint32_t
+power_manager_get_current_frequency(unsigned core_num)
+{
+ uint32_t freq, index;
+
+ if (core_num >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER_MANAGER, "Core(%u) is out of range 0...%d\n",
+ core_num, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ if (!(global_enabled_cpus & (1ULL << core_num)))
+ return 0;
+
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl);
+ index = rte_power_get_freq(core_num);
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl);
+ if (index >= RTE_MAX_LCORE)
+ freq = 0;
+ else
+ freq = global_core_freq_info[core_num].freqs[index];
+
+ return freq;
+}
+
+int
+power_manager_exit(void)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for (i = 0; global_enabled_cpus; global_enabled_cpus &= ~(1 << i++)) {
+ if (rte_power_exit(i) < 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to shutdown power manager "
+ "for core %u\n", i);
+ ret = -1;
+ }
+ }
+ global_enabled_cpus = 0;
+ return ret;
+}
+
+int
+power_manager_scale_mask_up(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(up, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_down(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(down, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_min(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(min, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_max(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(max, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_up(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(up, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_down(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(down, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_min(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(min, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_max(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(max, core_num, ret);
+ return ret;
+}
diff --git a/examples/vm_power_manager/power_manager.h b/examples/vm_power_manager/power_manager.h
new file mode 100644
index 0000000..d1d5c2c
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.h
@@ -0,0 +1,186 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef POWER_MANAGER_H_
+#define POWER_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management.
+ * Initializes resources and verifies the number of CPUs on the system.
+ * Wraps librte_power int rte_power_init(unsigned lcore_id);
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_init(void);
+
+/**
+ * Exit power management. Must be called prior to exiting the application.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_exit(void);
+
+/**
+ * Scale up the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_up(uint64_t core_mask);
+
+/**
+ * Scale down the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_down(uint64_t core_mask);
+
+/**
+ * Scale to the minimum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_min(uint64_t core_mask);
+
+/**
+ * Scale to the maximum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_max(uint64_t core_mask);
+
+/**
+ * Scale up frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_core_up(unsigned core_num);
+
+/**
+ * Scale down frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_down(unsigned core_num);
+
+/**
+ * Scale to minimum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_min(unsigned core_num);
+
+/**
+ * Scale to maximum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_max(unsigned core_num);
+
+/**
+ * Get the current freuency of the core specified by core_num
+ *
+ * @param core_num
+ * The core number to get the current frequency
+ *
+ * @return
+ * - 0 on error
+ * - >0 for current frequency.
+ */
+uint32_t power_manager_get_current_frequency(unsigned core_num);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* POWER_MANAGER_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 04/10] VM Power Management application and Makefile.
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (2 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 03/10] CPU Frequency Power Management(Host) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 05/10] VM Power Management CLI(Guest) Alan Carew
` (7 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
For launching CLI thread and Monitor thread and initialising
resources.
Requires a minimum of two lcores to run, additional cores specified by eal core
mask are not used.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/Makefile | 57 +++++++++++++++++++
examples/vm_power_manager/main.c | 113 +++++++++++++++++++++++++++++++++++++
examples/vm_power_manager/main.h | 52 +++++++++++++++++
3 files changed, 222 insertions(+)
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
new file mode 100644
index 0000000..7d6f943
--- /dev/null
+++ b/examples/vm_power_manager/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli.c power_manager.c channel_manager.c
+SRCS-y += channel_monitor.c
+
+CFLAGS += -O3 -lvirt -I$(RTE_SDK)/lib/librte_power/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
new file mode 100644
index 0000000..fdb9e73
--- /dev/null
+++ b/examples/vm_power_manager/main.c
@@ -0,0 +1,113 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_eal.h>
+#include <rte_launch.h>
+#include <rte_log.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "vm_power_cli.h"
+#include "main.h"
+
+static int
+run_monitor(__attribute__((unused)) void *arg)
+{
+ if (channel_manager_init(DEFAULT_HV_PATH) < 0) {
+ printf("Unable to initialize channel manager\n");
+ return -1;
+ }
+ if (channel_monitor_init() < 0) {
+ printf("Unable to initialize channel monitor\n");
+ return -1;
+ }
+ run_channel_monitor();
+ return 0;
+}
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ lcore_id = rte_get_next_lcore(-1, 1, 0);
+ if (lcore_id == RTE_MAX_LCORE) {
+ RTE_LOG(ERR, EAL, "A minimum of two cores are required to run "
+ "application\n");
+ return 0;
+ }
+ rte_eal_remote_launch(run_monitor, NULL, lcore_id);
+
+ run_cli(NULL);
+
+ rte_eal_mp_wait_lcore();
+ return 0;
+}
diff --git a/examples/vm_power_manager/main.h b/examples/vm_power_manager/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 05/10] VM Power Management CLI(Guest).
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (3 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 04/10] VM Power Management application and Makefile Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
` (6 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
Provides a small sample application(guest_vm_power_mgr) to run on a VM.
The application is run by providing a core mask(-c) and number of memory
channels(-n). The core mask corresponds to the number of lcore channels to
attempt to open. A maximum of 64 channels per VM is allowed. The channels must
be monitored by the host.
After successful initialisation a CPU frequency command can be sent to the host
using:
set_cpu_freq <lcore_num> <up|down|min|max>.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/guest_cli/Makefile | 56 ++++++++
examples/vm_power_manager/guest_cli/main.c | 86 ++++++++++++
examples/vm_power_manager/guest_cli/main.h | 52 +++++++
.../guest_cli/vm_power_cli_guest.c | 155 +++++++++++++++++++++
.../guest_cli/vm_power_cli_guest.h | 55 ++++++++
5 files changed, 404 insertions(+)
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
new file mode 100644
index 0000000..167a7ed
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -0,0 +1,56 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = guest_vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli_guest.c
+
+CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/guest_cli/main.c b/examples/vm_power_manager/guest_cli/main.c
new file mode 100644
index 0000000..b8f86d0
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.c
@@ -0,0 +1,86 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+*/
+#include <signal.h>
+
+#include <rte_lcore.h>
+#include <rte_power.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "vm_power_cli_guest.h"
+#include "main.h"
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_init(lcore_id);
+ }
+ run_cli(NULL);
+
+ return 0;
+}
diff --git a/examples/vm_power_manager/guest_cli/main.h b/examples/vm_power_manager/guest_cli/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
new file mode 100644
index 0000000..7c4af4a
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
@@ -0,0 +1,155 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+#include <termios.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_lcore.h>
+
+#include <rte_power.h>
+
+#include "vm_power_cli_guest.h"
+
+
+#define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t lcore_id;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = rte_power_freq_up(res->lcore_id);
+ else if (!strcmp(res->cmd , "down"))
+ ret = rte_power_freq_down(res->lcore_id);
+ else if (!strcmp(res->cmd , "min"))
+ ret = rte_power_freq_min(res->lcore_id);
+ else if (!strcmp(res->cmd , "max"))
+ ret = rte_power_freq_max(res->lcore_id);
+ if (ret != 1)
+ cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ lcore_id, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+ cl = cmdline_stdin_new(main_ctx, "vmpower(guest)> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
new file mode 100644
index 0000000..0c4bdd5
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
@@ -0,0 +1,55 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "channel_commands.h"
+
+int guest_channel_host_connect(unsigned lcore_id);
+
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 06/10] VM communication channels for VM Power Management(Guest).
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (4 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 05/10] VM Power Management CLI(Guest) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host Alan Carew
` (5 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
Allows for the opening of Virtio-Serial devices on a VM, where a DPDK
application can send packets to the host based monitor. The packet formatted is
specified in channel_commands.h
Each device appears as a serial device in path
/dev/virtio-ports/virtio.serial.port.<agent_type>.<lcore_num> where each lcore
in a DPDK application has exclusive to a device/channel.
Each channel is opened in non-blocking mode, after a successful open a test
packet is send to the host to ensure the host side is monitoring.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/guest_channel.c | 162 +++++++++++++++++++++++++++++++++++++++
lib/librte_power/guest_channel.h | 89 +++++++++++++++++++++
2 files changed, 251 insertions(+)
create mode 100644 lib/librte_power/guest_channel.c
create mode 100644 lib/librte_power/guest_channel.h
diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
new file mode 100644
index 0000000..2295665
--- /dev/null
+++ b/lib/librte_power/guest_channel.c
@@ -0,0 +1,162 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+#include <fcntl.h>
+#include <string.h>
+#include <errno.h>
+
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+static int global_fds[RTE_MAX_LCORE];
+
+int
+guest_channel_host_connect(const char *path, unsigned lcore_id)
+{
+ int flags, ret;
+ struct channel_packet pkt;
+ char fd_path[PATH_MAX];
+ int fd = -1;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ /* check if path is already open */
+ if (global_fds[lcore_id] != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is already open with fd %d\n",
+ lcore_id, global_fds[lcore_id]);
+ return -1;
+ }
+
+ snprintf(fd_path, PATH_MAX, "%s.%u", path, lcore_id);
+ RTE_LOG(INFO, GUEST_CHANNEL, "Opening channel '%s' for lcore %u\n",
+ fd_path, lcore_id);
+ fd = open(fd_path, O_RDWR);
+ if (fd < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Unable to to connect to '%s' with error "
+ "%s\n", fd_path, strerror(errno));
+ return -1;
+ }
+
+ flags = fcntl(fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on fcntl get flags for file %s\n",
+ fd_path);
+ goto error;
+ }
+
+ flags |= O_NONBLOCK;
+ if (fcntl(fd, F_SETFL, flags) < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on setting non-blocking mode for "
+ "file %s", fd_path);
+ goto error;
+ }
+ /* QEMU needs a delay after connection */
+ sleep(1);
+
+ /* Send a test packet, this command is ignored by the host, but a successful
+ * send indicates that the host endpoint is monitoring.
+ */
+ pkt.command = CPU_POWER_CONNECT;
+ global_fds[lcore_id] = fd;
+ ret = guest_channel_send_msg(&pkt, lcore_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Error on channel '%s' communications "
+ "test: %s\n", fd_path, strerror(ret));
+ goto error;
+ }
+ RTE_LOG(INFO, GUEST_CHANNEL, "Channel '%s' is now connected\n", fd_path);
+ return 0;
+error:
+ close(fd);
+ global_fds[lcore_id] = 0;
+ return -1;
+}
+
+int
+guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id)
+{
+ int ret, buffer_len = sizeof(*pkt);
+ void *buffer = pkt;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+
+ if (global_fds[lcore_id] == 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
+ return -1;
+ }
+ while (buffer_len > 0) {
+ ret = write(global_fds[lcore_id], buffer, buffer_len);
+ if (ret == buffer_len)
+ return 0;
+ if (ret == -1) {
+ if (errno == EINTR)
+ continue;
+ return errno;
+ }
+ buffer = (char *)buffer + ret;
+ buffer_len -= ret;
+ }
+ return 0;
+}
+
+void
+guest_channel_host_disconnect(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return;
+ }
+ if (global_fds[lcore_id] == 0)
+ return;
+ close(global_fds[lcore_id]);
+ global_fds[lcore_id] = 0;
+}
diff --git a/lib/librte_power/guest_channel.h b/lib/librte_power/guest_channel.h
new file mode 100644
index 0000000..9e18af5
--- /dev/null
+++ b/lib/librte_power/guest_channel.h
@@ -0,0 +1,89 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _GUEST_CHANNEL_H
+#define _GUEST_CHANNEL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <channel_commands.h>
+
+/**
+ * Connect to the Virtio-Serial VM end-point located in path. It is
+ * thread safe for unique lcore_ids. This function must be only called once from
+ * each lcore.
+ *
+ * @param path
+ * The path to the serial device on the filesystem
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int guest_channel_host_connect(const char *path, unsigned lcore_id);
+
+/**
+ * Disconnect from an already connected Virtio-Serial Endpoint.
+ *
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ */
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+/**
+ * Send a message contained in pkt over the Virtio-Serial to the host endpoint.
+ *
+ * @param pkt
+ * Pointer to a populated struct guest_agent_pkt
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on channel not connected.
+ * - errno on write to channel error.
+ */
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (5 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-25 10:10 ` Neil Horman
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
` (4 subsequent siblings)
11 siblings, 1 reply; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
Moved the current librte_power implementation to rte_power_acpi_cpufreq, with
renaming of functions only.
Added rte_power_kvm_vm implmentation to support Power Management from a VM.
librte_power now hides the implementation based on the environment used.
A new call rte_power_set_env() can explicidly set the environment, if not
called then auto-detection takes place.
rte_power_kvm_vm is subset of the librte_power APIs, the following is supported:
rte_power_init(unsigned lcore_id)
rte_power_exit(unsigned lcore_id)
rte_power_freq_up(unsigned lcore_id)
rte_power_freq_down(unsigned lcore_id)
rte_power_freq_min(unsigned lcore_id)
rte_power_freq_max(unsigned lcore_id)
The other unsupported APIs return -ENOTSUP
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/rte_power.c | 540 ++++-------------------------
lib/librte_power/rte_power.h | 120 +++++--
lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++++++++++++++++++
lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++++++++
lib/librte_power/rte_power_common.h | 39 +++
lib/librte_power/rte_power_kvm_vm.c | 160 +++++++++
lib/librte_power/rte_power_kvm_vm.h | 179 ++++++++++
7 files changed, 1273 insertions(+), 502 deletions(-)
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
create mode 100644 lib/librte_power/rte_power_common.h
create mode 100644 lib/librte_power/rte_power_kvm_vm.c
create mode 100644 lib/librte_power/rte_power_kvm_vm.h
diff --git a/lib/librte_power/rte_power.c b/lib/librte_power/rte_power.c
index 856da9a..998ed1c 100644
--- a/lib/librte_power/rte_power.c
+++ b/lib/librte_power/rte_power.c
@@ -31,515 +31,113 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <limits.h>
-
-#include <rte_memcpy.h>
#include <rte_atomic.h>
#include "rte_power.h"
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
-#ifdef RTE_LIBRTE_POWER_DEBUG
-#define POWER_DEBUG_TRACE(fmt, args...) do { \
- RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
- } while (0)
-#else
-#define POWER_DEBUG_TRACE(fmt, args...)
-#endif
-
-#define FOPEN_OR_ERR_RET(f, retval) do { \
- if ((f) == NULL) { \
- RTE_LOG(ERR, POWER, "File not openned\n"); \
- return (retval); \
- } \
-} while(0)
-
-#define FOPS_OR_NULL_GOTO(ret, label) do { \
- if ((ret) == NULL) { \
- RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
- goto label; \
- } \
-} while(0)
-
-#define FOPS_OR_ERR_GOTO(ret, label) do { \
- if ((ret) < 0) { \
- RTE_LOG(ERR, POWER, "File operations failed\n"); \
- goto label; \
- } \
-} while(0)
-
-#define STR_SIZE 1024
-#define POWER_CONVERT_TO_DECIMAL 10
+enum power_management_env global_default_env = PM_ENV_NOT_SET;
-#define POWER_GOVERNOR_USERSPACE "userspace"
-#define POWER_SYSFILE_GOVERNOR \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
-#define POWER_SYSFILE_AVAIL_FREQ \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
-#define POWER_SYSFILE_SETSPEED \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+volatile uint32_t global_env_cfg_status = 0;
-enum power_state {
- POWER_IDLE = 0,
- POWER_ONGOING,
- POWER_USED,
- POWER_UNKNOWN
-};
+/* function pointers */
+rte_power_freqs_t rte_power_freqs = NULL;
+rte_power_get_freq_t rte_power_get_freq = NULL;
+rte_power_set_freq_t rte_power_set_freq = NULL;
+rte_power_freq_change_t rte_power_freq_up = NULL;
+rte_power_freq_change_t rte_power_freq_down = NULL;
+rte_power_freq_change_t rte_power_freq_max = NULL;
+rte_power_freq_change_t rte_power_freq_min = NULL;
-/**
- * Power info per lcore.
- */
-struct rte_power_info {
- unsigned lcore_id; /**< Logical core id */
- uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
- uint32_t nb_freqs; /**< number of available freqs */
- FILE *f; /**< FD of scaling_setspeed */
- char governor_ori[32]; /**< Original governor name */
- uint32_t curr_idx; /**< Freq index in freqs array */
- volatile uint32_t state; /**< Power in use state */
-} __rte_cache_aligned;
-
-static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
-
-/**
- * It is to set specific freq for specific logical core, according to the index
- * of supported frequencies.
- */
-static int
-set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+int
+rte_power_set_env(enum power_management_env env)
{
- if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
- RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
- "should be less than %u\n", idx, pi->nb_freqs);
- return -1;
- }
-
- /* Check if it is the same as current */
- if (idx == pi->curr_idx)
+ if (rte_atomic32_cmpset(&global_env_cfg_status, 0, 1) == 0) {
return 0;
-
- POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
- idx, pi->freqs[idx], pi->lcore_id);
- if (fseek(pi->f, 0, SEEK_SET) < 0) {
- RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
- "for setting frequency for lcore %u\n", pi->lcore_id);
- return -1;
}
- if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
- RTE_LOG(ERR, POWER, "Fail to write new frequency for "
- "lcore %u\n", pi->lcore_id);
+ if (env == PM_ENV_ACPI_CPUFREQ) {
+ rte_power_freqs = rte_power_acpi_cpufreq_freqs;
+ rte_power_get_freq = rte_power_acpi_cpufreq_get_freq;
+ rte_power_set_freq = rte_power_acpi_cpufreq_set_freq;
+ rte_power_freq_up = rte_power_acpi_cpufreq_freq_up;
+ rte_power_freq_down = rte_power_acpi_cpufreq_freq_down;
+ rte_power_freq_min = rte_power_acpi_cpufreq_freq_min;
+ rte_power_freq_max = rte_power_acpi_cpufreq_freq_max;
+ } else if (env == PM_ENV_KVM_VM) {
+ rte_power_freqs = rte_power_kvm_vm_freqs;
+ rte_power_get_freq = rte_power_kvm_vm_get_freq;
+ rte_power_set_freq = rte_power_kvm_vm_set_freq;
+ rte_power_freq_up = rte_power_kvm_vm_freq_up;
+ rte_power_freq_down = rte_power_kvm_vm_freq_down;
+ rte_power_freq_min = rte_power_kvm_vm_freq_min;
+ rte_power_freq_max = rte_power_kvm_vm_freq_max;
+ } else {
+ RTE_LOG(ERR, POWER, "Invalid Power Management Environment(%d) set\n",
+ env);
+ rte_power_unset_env();
return -1;
}
- fflush(pi->f);
- pi->curr_idx = idx;
-
- return 1;
-}
-
-/**
- * It is to check the current scaling governor by reading sys file, and then
- * set it into 'userspace' if it is not by writing the sys file. The original
- * governor will be saved for rolling back.
- */
-static int
-power_set_governor_userspace(struct rte_power_info *pi)
-{
- FILE *f;
- int ret = -1;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *s;
- int val;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Check if current governor is userspace */
- if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
- sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
- ret = 0;
- POWER_DEBUG_TRACE("Power management governor of lcore %u is "
- "already userspace\n", pi->lcore_id);
- goto out;
- }
- /* Save the original governor */
- snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
-
- /* Write 'userspace' to the governor */
- val = fseek(f, 0, SEEK_SET);
- FOPS_OR_ERR_GOTO(val, out);
-
- val = fputs(POWER_GOVERNOR_USERSPACE, f);
- FOPS_OR_ERR_GOTO(val, out);
-
- ret = 0;
- RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
- "set to user space successfully\n", pi->lcore_id);
-out:
- fclose(f);
+ global_default_env = env;
+ return 0;
- return ret;
}
-/**
- * It is to get the available frequencies of the specific lcore by reading the
- * sys file.
- */
-static int
-power_get_available_freqs(struct rte_power_info *pi)
+void
+rte_power_unset_env(void)
{
- FILE *f;
- int ret = -1, i, count;
- char *p;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *freqs[RTE_MAX_LCORE_FREQS];
- char *s;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
- pi->lcore_id);
- f = fopen(fullpath, "r");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Strip the line break if there is */
- p = strchr(buf, '\n');
- if (p != NULL)
- *p = 0;
-
- /* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
- count = rte_strsplit(buf, sizeof(buf), freqs,
- RTE_MAX_LCORE_FREQS, ' ');
- if (count <= 0) {
- RTE_LOG(ERR, POWER, "No available frequency in "
- ""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
- goto out;
- }
- if (count >= RTE_MAX_LCORE_FREQS) {
- RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
- count);
- goto out;
- }
-
- /* Store the available frequncies into power context */
- for (i = 0, pi->nb_freqs = 0; i < count; i++) {
- POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
- i, freqs[i]);
- pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
- POWER_CONVERT_TO_DECIMAL);
- }
-
- ret = 0;
- POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
- count, pi->lcore_id);
-out:
- fclose(f);
-
- return ret;
+ if (rte_atomic32_cmpset(&global_env_cfg_status, 1, 0) != 0)
+ global_default_env = PM_ENV_NOT_SET;
}
-/**
- * It is to fopen the sys file for the future setting the lcore frequency.
- */
-static int
-power_init_for_setting_freq(struct rte_power_info *pi)
-{
- FILE *f;
- char fullpath[PATH_MAX];
- char buf[BUFSIZ];
- uint32_t i, freq;
- char *s;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, -1);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
- for (i = 0; i < pi->nb_freqs; i++) {
- if (freq == pi->freqs[i]) {
- pi->curr_idx = i;
- pi->f = f;
- return 0;
- }
- }
-
-out:
- fclose(f);
-
- return -1;
+enum power_management_env
+rte_power_get_env(void) {
+ return global_default_env;
}
int
rte_power_init(unsigned lcore_id)
{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
- == 0) {
- RTE_LOG(INFO, POWER, "Power management of lcore %u is "
- "in use\n", lcore_id);
- return -1;
- }
-
- pi->lcore_id = lcore_id;
- /* Check and set the governor */
- if (power_set_governor_userspace(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
- "userspace\n", lcore_id);
- goto fail;
- }
+ int ret = -1;
- /* Get the available frequencies */
- if (power_get_available_freqs(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
- "lcore %u\n", lcore_id);
- goto fail;
+ if (global_default_env == PM_ENV_ACPI_CPUFREQ) {
+ return rte_power_acpi_cpufreq_init(lcore_id);
}
-
- /* Init for setting lcore frequency */
- if (power_init_for_setting_freq(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
- "lcore %u\n", lcore_id);
- goto fail;
+ if (global_default_env == PM_ENV_KVM_VM) {
+ return rte_power_kvm_vm_init(lcore_id);
}
-
- /* Set freq to max by default */
- if (rte_power_freq_max(lcore_id) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
- "to max\n", lcore_id);
- goto fail;
+ /* Auto detect Environment */
+ RTE_LOG(INFO, POWER, "Attempting to initialise ACPI cpufreq power "
+ "management...\n");
+ ret = rte_power_acpi_cpufreq_init(lcore_id);
+ if (ret == 0) {
+ rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ goto out;
}
- RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
- "power manamgement\n", lcore_id);
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
-
- return 0;
-
-fail:
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
-
- return -1;
-}
-
-/**
- * It is to check the governor and then set the original governor back if
- * needed by writing the the sys file.
- */
-static int
-power_set_governor_original(struct rte_power_info *pi)
-{
- FILE *f;
- int ret = -1;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *s;
- int val;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Check if the governor to be set is the same as current */
- if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
- ret = 0;
- POWER_DEBUG_TRACE("Power management governor of lcore %u "
- "has already been set to %s\n",
- pi->lcore_id, pi->governor_ori);
+ RTE_LOG(INFO, POWER, "Attempting to initialise VM power management...\n");
+ ret = rte_power_kvm_vm_init(lcore_id);
+ if (ret == 0) {
+ rte_power_set_env(PM_ENV_KVM_VM);
goto out;
}
-
- /* Write back the original governor */
- val = fseek(f, 0, SEEK_SET);
- FOPS_OR_ERR_GOTO(val, out);
-
- val = fputs(pi->governor_ori, f);
- FOPS_OR_ERR_GOTO(val, out);
-
- ret = 0;
- RTE_LOG(INFO, POWER, "Power manamgement governor of lcore %u "
- "has been set back to %s successfully\n",
- pi->lcore_id, pi->governor_ori);
+ RTE_LOG(ERR, POWER, "Unable to set Power Management Environment for lcore "
+ "%u\n", lcore_id);
out:
- fclose(f);
-
return ret;
}
int
rte_power_exit(unsigned lcore_id)
{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
- pi = &lcore_power_info[lcore_id];
- if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
- == 0) {
- RTE_LOG(INFO, POWER, "Power management of lcore %u is "
- "not used\n", lcore_id);
- return -1;
- }
-
- /* Close FD of setting freq */
- fclose(pi->f);
- pi->f = NULL;
-
- /* Set the governor back to the original */
- if (power_set_governor_original(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
- "to the original\n", lcore_id);
- goto fail;
- }
-
- RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
- "'userspace' mode and been set back to the "
- "original\n", lcore_id);
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
-
- return 0;
-
-fail:
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+ if (global_default_env == PM_ENV_ACPI_CPUFREQ)
+ return rte_power_acpi_cpufreq_exit(lcore_id);
+ if (global_default_env == PM_ENV_KVM_VM)
+ return rte_power_kvm_vm_exit(lcore_id);
+ RTE_LOG(ERR, POWER, "Environment has not been set, unable to exit "
+ "gracefully\n");
return -1;
-}
-
-uint32_t
-rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE || !freqs) {
- RTE_LOG(ERR, POWER, "Invalid input parameter\n");
- return 0;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (num < pi->nb_freqs) {
- RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
- return 0;
- }
- rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
-
- return pi->nb_freqs;
-}
-
-uint32_t
-rte_power_get_freq(unsigned lcore_id)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return RTE_POWER_INVALID_FREQ_INDEX;
- }
-
- return lcore_power_info[lcore_id].curr_idx;
-}
-
-int
-rte_power_set_freq(unsigned lcore_id, uint32_t index)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- return set_freq_internal(&(lcore_power_info[lcore_id]), index);
-}
-
-int
-rte_power_freq_down(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
- pi = &lcore_power_info[lcore_id];
- if (pi->curr_idx + 1 == pi->nb_freqs)
- return 0;
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->curr_idx + 1);
}
-
-int
-rte_power_freq_up(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (pi->curr_idx == 0)
- return 0;
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->curr_idx - 1);
-}
-
-int
-rte_power_freq_max(unsigned lcore_id)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(&lcore_power_info[lcore_id], 0);
-}
-
-int
-rte_power_freq_min(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->nb_freqs - 1);
-}
-
diff --git a/lib/librte_power/rte_power.h b/lib/librte_power/rte_power.h
index 9c1419e..9338069 100644
--- a/lib/librte_power/rte_power.h
+++ b/lib/librte_power/rte_power.h
@@ -48,12 +48,48 @@
extern "C" {
#endif
-#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+/* Power Management Environment State */
+enum power_management_env {PM_ENV_NOT_SET, PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM};
/**
- * Initialize power management for a specific lcore. It will check and set the
- * governor to userspace for the lcore, get the available frequencies, and
- * prepare to set new lcore frequency.
+ * Set the default power management implementation. If this is not called prior
+ * to rte_power_init(), then auto-detect of the environment will take place.
+ * It is not thread safe.
+ *
+ * @param env
+ * env. The environment in which to initialise Power Management for.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_set_env(enum power_management_env env);
+
+/**
+ * Unset the global environment configuration.
+ * This can only be called after all threads have completed.
+ *
+ * @param None.
+ *
+ * @return
+ * None.
+ */
+void rte_power_unset_env(void);
+
+/**
+ * Get the default power management implementation.
+ *
+ * @param None.
+ *
+ * @return
+ * power_management_env The configured environment.
+ */
+enum power_management_env rte_power_get_env(void);
+
+/**
+ * Initialize power management for a specific lcore. If rte_power_set_env() has
+ * not been called then an auto-detect of the environment will start and
+ * initialise the corresponding resources.
*
* @param lcore_id
* lcore id.
@@ -65,8 +101,9 @@ extern "C" {
int rte_power_init(unsigned lcore_id);
/**
- * Exit power management on a specific lcore. It will set the governor to which
- * is before initialized.
+ * Exit power management on a specific lcore. This will call the environment
+ * dependent exit function.
+ *
*
* @param lcore_id
* lcore id.
@@ -78,11 +115,9 @@ int rte_power_init(unsigned lcore_id);
int rte_power_exit(unsigned lcore_id);
/**
- * Get the available frequencies of a specific lcore. The return value will be
- * the minimal one of the total number of available frequencies and the number
- * of buffer. The index of available frequencies used in other interfaces
- * should be in the range of 0 to this return value.
- * It should be protected outside of this function for threadsafe.
+ * Get the available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -94,12 +129,15 @@ int rte_power_exit(unsigned lcore_id);
* @return
* The number of available frequencies.
*/
-uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
+typedef uint32_t (*rte_power_freqs_t)(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+extern rte_power_freqs_t rte_power_freqs;
/**
- * Return the current index of available frequencies of a specific lcore. It
- * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
- * It should be protected outside of this function for threadsafe.
+ * Return the current index of available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -107,12 +145,15 @@ uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
* @return
* The current index of available frequencies.
*/
-uint32_t rte_power_get_freq(unsigned lcore_id);
+typedef uint32_t (*rte_power_get_freq_t)(unsigned lcore_id);
+
+extern rte_power_get_freq_t rte_power_get_freq;
/**
* Set the new frequency for a specific lcore by indicating the index of
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -121,70 +162,87 @@ uint32_t rte_power_get_freq(unsigned lcore_id);
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_set_freq(unsigned lcore_id, uint32_t index);
+typedef int (*rte_power_set_freq_t)(unsigned lcore_id, uint32_t index);
+
+extern rte_power_set_freq_t rte_power_set_freq;
+
+/**
+ * Function pointer definition for generic frequency change functions. Review
+ * each environments specific documentation for usage.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+typedef int (*rte_power_freq_change_t)(unsigned lcore_id);
/**
* Scale up the frequency of a specific lcore according to the available
* frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_up(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_up;
/**
* Scale down the frequency of a specific lcore according to the available
* frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_down(unsigned lcore_id);
+
+extern rte_power_freq_change_t rte_power_freq_down;
/**
* Scale up the frequency of a specific lcore to the highest according to the
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_max(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_max;
/**
* Scale down the frequency of a specific lcore to the lowest according to the
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage..
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_min(unsigned lcore_id);
+rte_power_freq_change_t rte_power_freq_min;
#ifdef __cplusplus
}
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.c b/lib/librte_power/rte_power_acpi_cpufreq.c
new file mode 100644
index 0000000..09085c3
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.c
@@ -0,0 +1,545 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+
+#include <rte_memcpy.h>
+#include <rte_atomic.h>
+
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_common.h"
+
+#ifdef RTE_LIBRTE_POWER_DEBUG
+#define POWER_DEBUG_TRACE(fmt, args...) do { \
+ RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
+} while (0)
+#else
+#define POWER_DEBUG_TRACE(fmt, args...)
+#endif
+
+#define FOPEN_OR_ERR_RET(f, retval) do { \
+ if ((f) == NULL) { \
+ RTE_LOG(ERR, POWER, "File not openned\n"); \
+ return retval; \
+ } \
+} while (0)
+
+#define FOPS_OR_NULL_GOTO(ret, label) do { \
+ if ((ret) == NULL) { \
+ RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
+ goto label; \
+ } \
+} while (0)
+
+#define FOPS_OR_ERR_GOTO(ret, label) do { \
+ if ((ret) < 0) { \
+ RTE_LOG(ERR, POWER, "File operations failed\n"); \
+ goto label; \
+ } \
+} while (0)
+
+#define STR_SIZE 1024
+#define POWER_CONVERT_TO_DECIMAL 10
+
+#define POWER_GOVERNOR_USERSPACE "userspace"
+#define POWER_SYSFILE_GOVERNOR \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
+#define POWER_SYSFILE_AVAIL_FREQ \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
+#define POWER_SYSFILE_SETSPEED \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+
+enum power_state {
+ POWER_IDLE = 0,
+ POWER_ONGOING,
+ POWER_USED,
+ POWER_UNKNOWN
+};
+
+/**
+ * Power info per lcore.
+ */
+struct rte_power_info {
+ unsigned lcore_id; /**< Logical core id */
+ uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
+ uint32_t nb_freqs; /**< number of available freqs */
+ FILE *f; /**< FD of scaling_setspeed */
+ char governor_ori[32]; /**< Original governor name */
+ uint32_t curr_idx; /**< Freq index in freqs array */
+ volatile uint32_t state; /**< Power in use state */
+} __rte_cache_aligned;
+
+static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
+
+/**
+ * It is to set specific freq for specific logical core, according to the index
+ * of supported frequencies.
+ */
+static int
+set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+{
+ if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
+ RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
+ "should be less than %u\n", idx, pi->nb_freqs);
+ return -1;
+ }
+
+ /* Check if it is the same as current */
+ if (idx == pi->curr_idx)
+ return 0;
+
+ POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
+ idx, pi->freqs[idx], pi->lcore_id);
+ if (fseek(pi->f, 0, SEEK_SET) < 0) {
+ RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
+ "for setting frequency for lcore %u\n", pi->lcore_id);
+ return -1;
+ }
+ if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
+ RTE_LOG(ERR, POWER, "Fail to write new frequency for "
+ "lcore %u\n", pi->lcore_id);
+ return -1;
+ }
+ fflush(pi->f);
+ pi->curr_idx = idx;
+
+ return 1;
+}
+
+/**
+ * It is to check the current scaling governor by reading sys file, and then
+ * set it into 'userspace' if it is not by writing the sys file. The original
+ * governor will be saved for rolling back.
+ */
+static int
+power_set_governor_userspace(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *s;
+ int val;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Check if current governor is userspace */
+ if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
+ sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
+ ret = 0;
+ POWER_DEBUG_TRACE("Power management governor of lcore %u is "
+ "already userspace\n", pi->lcore_id);
+ goto out;
+ }
+ /* Save the original governor */
+ snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
+
+ /* Write 'userspace' to the governor */
+ val = fseek(f, 0, SEEK_SET);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ val = fputs(POWER_GOVERNOR_USERSPACE, f);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ ret = 0;
+ RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
+ "set to user space successfully\n", pi->lcore_id);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+/**
+ * It is to get the available frequencies of the specific lcore by reading the
+ * sys file.
+ */
+static int
+power_get_available_freqs(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1, i, count;
+ char *p;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *freqs[RTE_MAX_LCORE_FREQS];
+ char *s;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
+ pi->lcore_id);
+ f = fopen(fullpath, "r");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Strip the line break if there is */
+ p = strchr(buf, '\n');
+ if (p != NULL)
+ *p = 0;
+
+ /* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
+ count = rte_strsplit(buf, sizeof(buf), freqs,
+ RTE_MAX_LCORE_FREQS, ' ');
+ if (count <= 0) {
+ RTE_LOG(ERR, POWER, "No available frequency in "
+ ""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
+ goto out;
+ }
+ if (count >= RTE_MAX_LCORE_FREQS) {
+ RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
+ count);
+ goto out;
+ }
+
+ /* Store the available frequncies into power context */
+ for (i = 0, pi->nb_freqs = 0; i < count; i++) {
+ POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
+ i, freqs[i]);
+ pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
+ POWER_CONVERT_TO_DECIMAL);
+ }
+
+ ret = 0;
+ POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
+ count, pi->lcore_id);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+/**
+ * It is to fopen the sys file for the future setting the lcore frequency.
+ */
+static int
+power_init_for_setting_freq(struct rte_power_info *pi)
+{
+ FILE *f;
+ char fullpath[PATH_MAX];
+ char buf[BUFSIZ];
+ uint32_t i, freq;
+ char *s;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, -1);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
+ for (i = 0; i < pi->nb_freqs; i++) {
+ if (freq == pi->freqs[i]) {
+ pi->curr_idx = i;
+ pi->f = f;
+ return 0;
+ }
+ }
+
+ out:
+ fclose(f);
+
+ return -1;
+}
+
+int
+rte_power_acpi_cpufreq_init(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+ lcore_id, RTE_MAX_LCORE - 1U);
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
+ == 0) {
+ RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+ "in use\n", lcore_id);
+ return -1;
+ }
+
+ pi->lcore_id = lcore_id;
+ /* Check and set the governor */
+ if (power_set_governor_userspace(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
+ "userspace\n", lcore_id);
+ goto fail;
+ }
+
+ /* Get the available frequencies */
+ if (power_get_available_freqs(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
+ "lcore %u\n", lcore_id);
+ goto fail;
+ }
+
+ /* Init for setting lcore frequency */
+ if (power_init_for_setting_freq(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
+ "lcore %u\n", lcore_id);
+ goto fail;
+ }
+
+ /* Set freq to max by default */
+ if (rte_power_acpi_cpufreq_freq_max(lcore_id) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
+ "to max\n", lcore_id);
+ goto fail;
+ }
+
+ RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
+ "power manamgement\n", lcore_id);
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
+
+ return 0;
+
+ fail:
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+ return -1;
+}
+
+/**
+ * It is to check the governor and then set the original governor back if
+ * needed by writing the the sys file.
+ */
+static int
+power_set_governor_original(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *s;
+ int val;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Check if the governor to be set is the same as current */
+ if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
+ ret = 0;
+ POWER_DEBUG_TRACE("Power management governor of lcore %u "
+ "has already been set to %s\n",
+ pi->lcore_id, pi->governor_ori);
+ goto out;
+ }
+
+ /* Write back the original governor */
+ val = fseek(f, 0, SEEK_SET);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ val = fputs(pi->governor_ori, f);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ ret = 0;
+ RTE_LOG(INFO, POWER, "Power management governor of lcore %u "
+ "has been set back to %s successfully\n",
+ pi->lcore_id, pi->governor_ori);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+int
+rte_power_acpi_cpufreq_exit(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+ lcore_id, RTE_MAX_LCORE - 1U);
+ return -1;
+ }
+ pi = &lcore_power_info[lcore_id];
+ if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
+ == 0) {
+ RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+ "not used\n", lcore_id);
+ return -1;
+ }
+
+ /* Close FD of setting freq */
+ fclose(pi->f);
+ pi->f = NULL;
+
+ /* Set the governor back to the original */
+ if (power_set_governor_original(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
+ "to the original\n", lcore_id);
+ goto fail;
+ }
+
+ RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
+ "'userspace' mode and been set back to the "
+ "original\n", lcore_id);
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
+
+ return 0;
+
+ fail:
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+ return -1;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE || !freqs) {
+ RTE_LOG(ERR, POWER, "Invalid input parameter\n");
+ return 0;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (num < pi->nb_freqs) {
+ RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
+ return 0;
+ }
+ rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
+
+ return pi->nb_freqs;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_get_freq(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return RTE_POWER_INVALID_FREQ_INDEX;
+ }
+
+ return lcore_power_info[lcore_id].curr_idx;
+}
+
+int
+rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ return set_freq_internal(&(lcore_power_info[lcore_id]), index);
+}
+
+int
+rte_power_acpi_cpufreq_freq_down(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (pi->curr_idx + 1 == pi->nb_freqs)
+ return 0;
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->curr_idx + 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_up(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (pi->curr_idx == 0)
+ return 0;
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->curr_idx - 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_max(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(&lcore_power_info[lcore_id], 0);
+}
+
+int
+rte_power_acpi_cpufreq_freq_min(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->nb_freqs - 1);
+}
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.h b/lib/librte_power/rte_power_acpi_cpufreq.h
new file mode 100644
index 0000000..68578e9
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.h
@@ -0,0 +1,192 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_ACPI_CPUFREQ_H
+#define _RTE_POWER_ACPI_CPUFREQ_H
+
+/**
+ * @file
+ * RTE Power Management via userspace ACPI cpufreq
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore. It will check and set the
+ * governor to userspace for the lcore, get the available frequencies, and
+ * prepare to set new lcore frequency.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore. It will set the governor to which
+ * is before initialized.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore. The return value will be
+ * the minimal one of the total number of available frequencies and the number
+ * of buffer. The index of available frequencies used in other interfaces
+ * should be in the range of 0 to this return value.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param freqs
+ * The buffer array to save the frequencies.
+ * @param num
+ * The number of frequencies to get.
+ *
+ * @return
+ * The number of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore. It
+ * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * The current index of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param index
+ * The index of available frequencies.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency chnaged.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/lib/librte_power/rte_power_common.h b/lib/librte_power/rte_power_common.h
new file mode 100644
index 0000000..64bd168
--- /dev/null
+++ b/lib/librte_power/rte_power_common.h
@@ -0,0 +1,39 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_POWER_COMMON_H_
+#define RTE_POWER_COMMON_H_
+
+#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+
+#endif /* RTE_POWER_COMMON_H_ */
diff --git a/lib/librte_power/rte_power_kvm_vm.c b/lib/librte_power/rte_power_kvm_vm.c
new file mode 100644
index 0000000..d8cef98
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.c
@@ -0,0 +1,160 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <errno.h>
+#include <string.h>
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
+
+#define FD_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+#define SEND_MSG_AND_RETURN(pkt, lcore_id, ret) do { \
+ ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id); \
+ if ((ret) == 0) \
+ return 1; \
+ if ((ret) > 0) \
+ RTE_LOG(DEBUG, POWER, "Error sending message: %s\n", \
+ strerror(ret)); \
+ return -1; \
+} while (0)
+
+static struct channel_packet pkt[RTE_MAX_LCORE];
+
+
+int
+rte_power_kvm_vm_init(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ pkt[lcore_id].command = CPU_POWER;
+ pkt[lcore_id].resource_id = lcore_id;
+ return guest_channel_host_connect(FD_PATH, lcore_id);
+}
+
+int
+rte_power_kvm_vm_exit(unsigned lcore_id)
+{
+ guest_channel_host_disconnect(lcore_id);
+ return 0;
+}
+
+uint32_t
+rte_power_kvm_vm_freqs(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t *freqs,
+ __attribute__((unused)) uint32_t num)
+{
+ RTE_LOG(ERR, POWER, "rte_power_freqs is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+uint32_t
+rte_power_kvm_vm_get_freq(__attribute__((unused)) unsigned lcore_id)
+{
+ RTE_LOG(ERR, POWER, "rte_power_get_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+int
+rte_power_kvm_vm_set_freq(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t index)
+{
+ RTE_LOG(ERR, POWER, "rte_power_set_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+int
+rte_power_kvm_vm_freq_up(unsigned lcore_id)
+{
+ int ret;
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ pkt[lcore_id].unit = CPU_SCALE_UP;
+
+ SEND_MSG_AND_RETURN(pkt, lcore_id , ret);
+}
+
+int
+rte_power_kvm_vm_freq_down(unsigned lcore_id)
+{
+ int ret;
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ pkt[lcore_id].unit = CPU_SCALE_DOWN;
+
+ SEND_MSG_AND_RETURN(pkt, lcore_id , ret);
+}
+
+int
+rte_power_kvm_vm_freq_max(unsigned lcore_id)
+{
+ int ret;
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ pkt[lcore_id].unit = CPU_SCALE_MAX;
+
+ SEND_MSG_AND_RETURN(pkt, lcore_id , ret);
+}
+
+int
+rte_power_kvm_vm_freq_min(unsigned lcore_id)
+{
+ int ret;
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ pkt[lcore_id].unit = CPU_SCALE_MIN;
+
+ SEND_MSG_AND_RETURN(pkt, lcore_id , ret);
+}
diff --git a/lib/librte_power/rte_power_kvm_vm.h b/lib/librte_power/rte_power_kvm_vm.h
new file mode 100644
index 0000000..dcbc878
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.h
@@ -0,0 +1,179 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_KVM_VM_H
+#define _RTE_POWER_KVM_VM_H
+
+/**
+ * @file
+ * RTE Power Management KVM VM
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param freqs
+ * The buffer array to save the frequencies.
+ * @param num
+ * The number of frequencies to get.
+ *
+ * @return
+ * -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_freqs(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param index
+ * The index of available frequencies.
+ *
+ * @return
+ * -ENOTSUP
+ */
+int rte_power_kvm_vm_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore. This request is forwarded to the
+ * host monitor.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 08/10] Packet format for VM Power Management(Host and Guest).
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (6 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
` (3 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
Provides a command packet format for host and guest.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/channel_commands.h | 68 +++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 lib/librte_power/channel_commands.h
diff --git a/lib/librte_power/channel_commands.h b/lib/librte_power/channel_commands.h
new file mode 100644
index 0000000..e33e85b
--- /dev/null
+++ b/lib/librte_power/channel_commands.h
@@ -0,0 +1,68 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_COMMANDS_H_
+#define CHANNEL_COMMANDS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <rte_config.h>
+
+#if RTE_MAX_LCORE > 64
+#error Maximum number of cores and channels is 64, overflow is guaranteed to \
+ cause problems with VM Power Management
+#endif
+
+#define CPU_POWER 1
+#define CPU_POWER_CONNECT 2
+
+#define CPU_SCALE_UP 1
+#define CPU_SCALE_DOWN 2
+#define CPU_SCALE_MAX 3
+#define CPU_SCALE_MIN 4
+
+struct channel_packet {
+ uint64_t resource_id; /* core_num, device */
+ uint32_t unit; /* scale down/up/min/max */
+ uint32_t command; /* Power, IO, etc */
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_COMMANDS_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 09/10] Build system integration for VM Power Management(Guest and Host)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (7 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 10/10] VM Power Management Unit Tests Alan Carew
` (2 subsequent siblings)
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
librte_power now contains both rte_power_acpi_cpufreq and rte_power_kvm_vm
implementations.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/librte_power/Makefile b/lib/librte_power/Makefile
index 6185812..d672a5a 100644
--- a/lib/librte_power/Makefile
+++ b/lib/librte_power/Makefile
@@ -37,7 +37,8 @@ LIB = librte_power.a
CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -fno-strict-aliasing
# all source are stored in SRCS-y
-SRCS-$(CONFIG_RTE_LIBRTE_POWER) := rte_power.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) := rte_power.c rte_power_acpi_cpufreq.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += rte_power_kvm_vm.c guest_channel.c
# install this header file
SYMLINK-$(CONFIG_RTE_LIBRTE_POWER)-include := rte_power.h
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v2 10/10] VM Power Management Unit Tests
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (8 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
@ 2014-09-24 17:26 ` Alan Carew
2014-09-25 2:56 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Liu, Yong
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
11 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-24 17:26 UTC (permalink / raw)
To: dev
Updated the unit tests to cover both librte_power implementations as well as
the external API.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
app/test/Makefile | 3 +-
app/test/autotest_data.py | 26 ++
app/test/test_power.c | 445 +++---------------------------
app/test/test_power_acpi_cpufreq.c | 544 +++++++++++++++++++++++++++++++++++++
app/test/test_power_kvm_vm.c | 308 +++++++++++++++++++++
5 files changed, 917 insertions(+), 409 deletions(-)
create mode 100644 app/test/test_power_acpi_cpufreq.c
create mode 100644 app/test/test_power_kvm_vm.c
diff --git a/app/test/Makefile b/app/test/Makefile
index 37a3772..03ade39 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -119,7 +119,8 @@ endif
SRCS-$(CONFIG_RTE_LIBRTE_METER) += test_meter.c
SRCS-$(CONFIG_RTE_LIBRTE_KNI) += test_kni.c
-SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power.c test_power_acpi_cpufreq.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power_kvm_vm.c
SRCS-y += test_common.c
SRCS-$(CONFIG_RTE_LIBRTE_IVSHMEM) += test_ivshmem.c
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 878c72e..618a946 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -425,6 +425,32 @@ non_parallel_test_group_list = [
]
},
{
+ "Prefix" : "power_acpi_cpufreq",
+ "Memory" : all_sockets(512),
+ "Tests" :
+ [
+ {
+ "Name" : "Power ACPI cpufreq autotest",
+ "Command" : "power_acpi_cpufreq_autotest",
+ "Func" : default_autotest,
+ "Report" : None,
+ },
+ ]
+},
+{
+ "Prefix" : "power_kvm_vm",
+ "Memory" : "512",
+ "Tests" :
+ [
+ {
+ "Name" : "Power KVM VM autotest",
+ "Command" : "power_kvm_vm_autotest",
+ "Func" : default_autotest,
+ "Report" : None,
+ },
+ ]
+},
+{
"Prefix" : "lpm6",
"Memory" : "512",
"Tests" :
diff --git a/app/test/test_power.c b/app/test/test_power.c
index d9eb420..64a2305 100644
--- a/app/test/test_power.c
+++ b/app/test/test_power.c
@@ -41,437 +41,66 @@
#include <rte_power.h>
-#define TEST_POWER_LCORE_ID 2U
-#define TEST_POWER_LCORE_INVALID ((unsigned)RTE_MAX_LCORE)
-#define TEST_POWER_FREQS_NUM_MAX ((unsigned)RTE_MAX_LCORE_FREQS)
-
-#define TEST_POWER_SYSFILE_CUR_FREQ \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_cur_freq"
-
-static uint32_t total_freq_num;
-static uint32_t freqs[TEST_POWER_FREQS_NUM_MAX];
-
-static int
-check_cur_freq(unsigned lcore_id, uint32_t idx)
-{
-#define TEST_POWER_CONVERT_TO_DECIMAL 10
- FILE *f;
- char fullpath[PATH_MAX];
- char buf[BUFSIZ];
- uint32_t cur_freq;
- int ret = -1;
-
- if (snprintf(fullpath, sizeof(fullpath),
- TEST_POWER_SYSFILE_CUR_FREQ, lcore_id) < 0) {
- return 0;
- }
- f = fopen(fullpath, "r");
- if (f == NULL) {
- return 0;
- }
- if (fgets(buf, sizeof(buf), f) == NULL) {
- goto fail_get_cur_freq;
- }
- cur_freq = strtoul(buf, NULL, TEST_POWER_CONVERT_TO_DECIMAL);
- ret = (freqs[idx] == cur_freq ? 0 : -1);
-
-fail_get_cur_freq:
- fclose(f);
-
- return ret;
-}
-
-/* Check rte_power_freqs() */
-static int
-check_power_freqs(void)
-{
- uint32_t ret;
-
- total_freq_num = 0;
- memset(freqs, 0, sizeof(freqs));
-
- /* test with an invalid lcore id */
- ret = rte_power_freqs(TEST_POWER_LCORE_INVALID, freqs,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* test with NULL buffer to save available freqs */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, NULL,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully with "
- "NULL buffer on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* test of getting zero number of freqs */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs, 0);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully with "
- "zero buffer size on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* test with all valid input parameters */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret == 0 || ret > TEST_POWER_FREQS_NUM_MAX) {
- printf("Fail to get available freqs on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Save the total number of available freqs */
- total_freq_num = ret;
-
- return 0;
-}
-
-/* Check rte_power_get_freq() */
-static int
-check_power_get_freq(void)
-{
- int ret;
- uint32_t count;
-
- /* test with an invalid lcore id */
- count = rte_power_get_freq(TEST_POWER_LCORE_INVALID);
- if (count < TEST_POWER_FREQS_NUM_MAX) {
- printf("Unexpectedly get freq index successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- count = rte_power_get_freq(TEST_POWER_LCORE_ID);
- if (count >= TEST_POWER_FREQS_NUM_MAX) {
- printf("Fail to get the freq index on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, count);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_set_freq() */
-static int
-check_power_set_freq(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_set_freq(TEST_POWER_LCORE_INVALID, 0);
- if (ret >= 0) {
- printf("Unexpectedly set freq index successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* test with an invalid freq index */
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret >= 0) {
- printf("Unexpectedly set an invalid freq index (%u)"
- "successfully on lcore %u\n", TEST_POWER_FREQS_NUM_MAX,
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /**
- * test with an invalid freq index which is right one bigger than
- * total number of freqs
- */
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num);
- if (ret >= 0) {
- printf("Unexpectedly set an invalid freq index (%u)"
- "successfully on lcore %u\n", total_freq_num,
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0) {
- printf("Fail to set freq index on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_down() */
-static int
-check_power_freq_down(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_down(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale down successfully the freq on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* Scale down to min and then scale down one step */
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- /* Scale up to max and then scale down one step */
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf ("Fail to scale down the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_up() */
-static int
-check_power_freq_up(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_up(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale up successfully the freq on %u\n",
- TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* Scale down to min and then scale up one step */
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 2);
- if (ret < 0)
- return -1;
-
- /* Scale up to max and then scale up one step */
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_max() */
-static int
-check_power_freq_max(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_max(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale up successfully the freq to max on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_min() */
-static int
-check_power_freq_min(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_min(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale down successfully the freq to min "
- "on lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
static int
test_power(void)
{
int ret = -1;
+ enum power_management_env env;
- /* test of init power management for an invalid lcore */
- ret = rte_power_init(TEST_POWER_LCORE_INVALID);
+ /* Test setting an invalid environment */
+ ret = rte_power_set_env(PM_ENV_NOT_SET);
if (ret == 0) {
- printf("Unexpectedly initialise power management successfully "
- "for lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- ret = rte_power_init(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Cannot initialise power management for lcore %u\n",
- TEST_POWER_LCORE_ID);
+ printf("Unexpectedly succeeded on setting an invalid environment\n");
return -1;
}
- /**
- * test of initialising power management for the lcore which has
- * been initialised
- */
- ret = rte_power_init(TEST_POWER_LCORE_ID);
- if (ret == 0) {
- printf("Unexpectedly init successfully power twice on "
- "lcore %u\n", TEST_POWER_LCORE_ID);
+ /* Test that the environment has not been set */
+ env = rte_power_get_env();
+ if (env != PM_ENV_NOT_SET) {
+ printf("Unexpectedly got a valid environment configuration\n");
return -1;
}
- ret = check_power_freqs();
- if (ret < 0)
+ /* verify that function pointers are NULL */
+ if (rte_power_freqs != NULL) {
+ printf("rte_power_freqs should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- if (total_freq_num < 2) {
- rte_power_exit(TEST_POWER_LCORE_ID);
- printf("Frequency can not be changed due to CPU itself\n");
- return 0;
}
-
- ret = check_power_get_freq();
- if (ret < 0)
- goto fail_all;
-
- ret = check_power_set_freq();
- if (ret < 0)
+ if (rte_power_get_freq != NULL) {
+ printf("rte_power_get_freq should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_down();
- if (ret < 0)
- goto fail_all;
-
- ret = check_power_freq_up();
- if (ret < 0)
+ }
+ if (rte_power_set_freq != NULL) {
+ printf("rte_power_set_freq should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_max();
- if (ret < 0)
+ }
+ if (rte_power_freq_up != NULL) {
+ printf("rte_power_freq_up should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_min();
- if (ret < 0)
+ }
+ if (rte_power_freq_down != NULL) {
+ printf("rte_power_freq_down should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = rte_power_exit(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Cannot exit power management for lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
}
-
- /**
- * test of exiting power management for the lcore which has been exited
- */
- ret = rte_power_exit(TEST_POWER_LCORE_ID);
- if (ret == 0) {
- printf("Unexpectedly exit successfully power management twice "
- "on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
+ if (rte_power_freq_max != NULL) {
+ printf("rte_power_freq_max should be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
}
-
- /* test of exit power management for an invalid lcore */
- ret = rte_power_exit(TEST_POWER_LCORE_INVALID);
- if (ret == 0) {
- printf("Unpectedly exit power management successfully for "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
+ if (rte_power_freq_min != NULL) {
+ printf("rte_power_freq_min should be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
}
-
+ rte_power_unset_env();
return 0;
-
fail_all:
- rte_power_exit(TEST_POWER_LCORE_ID);
-
+ rte_power_unset_env();
return -1;
}
diff --git a/app/test/test_power_acpi_cpufreq.c b/app/test/test_power_acpi_cpufreq.c
new file mode 100644
index 0000000..8848d75
--- /dev/null
+++ b/app/test/test_power_acpi_cpufreq.c
@@ -0,0 +1,544 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <limits.h>
+#include <string.h>
+
+#include "test.h"
+
+#include <rte_power.h>
+
+#define TEST_POWER_LCORE_ID 2U
+#define TEST_POWER_LCORE_INVALID ((unsigned)RTE_MAX_LCORE)
+#define TEST_POWER_FREQS_NUM_MAX ((unsigned)RTE_MAX_LCORE_FREQS)
+
+#define TEST_POWER_SYSFILE_CUR_FREQ \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_cur_freq"
+
+static uint32_t total_freq_num;
+static uint32_t freqs[TEST_POWER_FREQS_NUM_MAX];
+
+static int
+check_cur_freq(unsigned lcore_id, uint32_t idx)
+{
+#define TEST_POWER_CONVERT_TO_DECIMAL 10
+ FILE *f;
+ char fullpath[PATH_MAX];
+ char buf[BUFSIZ];
+ uint32_t cur_freq;
+ int ret = -1;
+
+ if (snprintf(fullpath, sizeof(fullpath),
+ TEST_POWER_SYSFILE_CUR_FREQ, lcore_id) < 0) {
+ return 0;
+ }
+ f = fopen(fullpath, "r");
+ if (f == NULL) {
+ return 0;
+ }
+ if (fgets(buf, sizeof(buf), f) == NULL) {
+ goto fail_get_cur_freq;
+ }
+ cur_freq = strtoul(buf, NULL, TEST_POWER_CONVERT_TO_DECIMAL);
+ ret = (freqs[idx] == cur_freq ? 0 : -1);
+
+fail_get_cur_freq:
+ fclose(f);
+
+ return ret;
+}
+
+/* Check rte_power_freqs() */
+static int
+check_power_freqs(void)
+{
+ uint32_t ret;
+
+ total_freq_num = 0;
+ memset(freqs, 0, sizeof(freqs));
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freqs(TEST_POWER_LCORE_INVALID, freqs,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* test with NULL buffer to save available freqs */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, NULL,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully with "
+ "NULL buffer on lcore %u\n", TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* test of getting zero number of freqs */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs, 0);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully with "
+ "zero buffer size on lcore %u\n", TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* test with all valid input parameters */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret == 0 || ret > TEST_POWER_FREQS_NUM_MAX) {
+ printf("Fail to get available freqs on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Save the total number of available freqs */
+ total_freq_num = ret;
+
+ return 0;
+}
+
+/* Check rte_power_get_freq() */
+static int
+check_power_get_freq(void)
+{
+ int ret;
+ uint32_t count;
+
+ /* test with an invalid lcore id */
+ count = rte_power_get_freq(TEST_POWER_LCORE_INVALID);
+ if (count < TEST_POWER_FREQS_NUM_MAX) {
+ printf("Unexpectedly get freq index successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ count = rte_power_get_freq(TEST_POWER_LCORE_ID);
+ if (count >= TEST_POWER_FREQS_NUM_MAX) {
+ printf("Fail to get the freq index on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, count);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_set_freq() */
+static int
+check_power_set_freq(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_INVALID, 0);
+ if (ret >= 0) {
+ printf("Unexpectedly set freq index successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* test with an invalid freq index */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret >= 0) {
+ printf("Unexpectedly set an invalid freq index (%u)"
+ "successfully on lcore %u\n", TEST_POWER_FREQS_NUM_MAX,
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /**
+ * test with an invalid freq index which is right one bigger than
+ * total number of freqs
+ */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num);
+ if (ret >= 0) {
+ printf("Unexpectedly set an invalid freq index (%u)"
+ "successfully on lcore %u\n", total_freq_num,
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0) {
+ printf("Fail to set freq index on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_down() */
+static int
+check_power_freq_down(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_down(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale down successfully the freq on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Scale down to min and then scale down one step */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ /* Scale up to max and then scale down one step */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf ("Fail to scale down the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_up() */
+static int
+check_power_freq_up(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_up(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale up successfully the freq on %u\n",
+ TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Scale down to min and then scale up one step */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 2);
+ if (ret < 0)
+ return -1;
+
+ /* Scale up to max and then scale up one step */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_max() */
+static int
+check_power_freq_max(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale up successfully the freq to max on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_min() */
+static int
+check_power_freq_min(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale down successfully the freq to min "
+ "on lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+static int
+test_power_acpi_cpufreq(void)
+{
+ int ret = -1;
+ enum power_management_env env;
+
+ ret = rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ if (ret != 0) {
+ printf("Failed on setting environment to PM_ENV_ACPI_CPUFREQ, this "
+ "may occur if environment is not configured correctly or "
+ " operating in another valid Power management environment\n");
+ return -1;
+ }
+
+ /* Test environment configuration */
+ env = rte_power_get_env();
+ if (env != PM_ENV_ACPI_CPUFREQ) {
+ printf("Unexpectedly got an environment other than ACPI cpufreq\n");
+ goto fail_all;
+ }
+
+ /* verify that function pointers are not NULL */
+ if (rte_power_freqs == NULL) {
+ printf("rte_power_freqs should not be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_get_freq == NULL) {
+ printf("rte_power_get_freq should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_set_freq == NULL) {
+ printf("rte_power_set_freq should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_up == NULL) {
+ printf("rte_power_freq_up should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_down == NULL) {
+ printf("rte_power_freq_down should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_max == NULL) {
+ printf("rte_power_freq_max should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_min == NULL) {
+ printf("rte_power_freq_min should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+
+ /* test of init power management for an invalid lcore */
+ ret = rte_power_init(TEST_POWER_LCORE_INVALID);
+ if (ret == 0) {
+ printf("Unexpectedly initialise power management successfully "
+ "for lcore %u\n", TEST_POWER_LCORE_INVALID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* Test initialisation of a valid lcore */
+ ret = rte_power_init(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Cannot initialise power management for lcore %u, this "
+ "may occur if environment is not configured "
+ "correctly(APCI cpufreq) or operating in another valid "
+ "Power management environment\n", TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /**
+ * test of initialising power management for the lcore which has
+ * been initialised
+ */
+ ret = rte_power_init(TEST_POWER_LCORE_ID);
+ if (ret == 0) {
+ printf("Unexpectedly init successfully power twice on "
+ "lcore %u\n", TEST_POWER_LCORE_ID);
+ goto fail_all;
+ }
+
+ ret = check_power_freqs();
+ if (ret < 0)
+ goto fail_all;
+
+ if (total_freq_num < 2) {
+ rte_power_exit(TEST_POWER_LCORE_ID);
+ printf("Frequency can not be changed due to CPU itself\n");
+ rte_power_unset_env();
+ return 0;
+ }
+
+ ret = check_power_get_freq();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_set_freq();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_down();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_up();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_max();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_min();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = rte_power_exit(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Cannot exit power management for lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /**
+ * test of exiting power management for the lcore which has been exited
+ */
+ ret = rte_power_exit(TEST_POWER_LCORE_ID);
+ if (ret == 0) {
+ printf("Unexpectedly exit successfully power management twice "
+ "on lcore %u\n", TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* test of exit power management for an invalid lcore */
+ ret = rte_power_exit(TEST_POWER_LCORE_INVALID);
+ if (ret == 0) {
+ printf("Unpectedly exit power management successfully for "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ rte_power_unset_env();
+ return -1;
+ }
+ rte_power_unset_env();
+ return 0;
+
+fail_all:
+ rte_power_exit(TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+}
+
+static struct test_command power_acpi_cpufreq_cmd = {
+ .command = "power_acpi_cpufreq_autotest",
+ .callback = test_power_acpi_cpufreq,
+};
+REGISTER_TEST_COMMAND(power_acpi_cpufreq_cmd);
diff --git a/app/test/test_power_kvm_vm.c b/app/test/test_power_kvm_vm.c
new file mode 100644
index 0000000..ac0fcb6
--- /dev/null
+++ b/app/test/test_power_kvm_vm.c
@@ -0,0 +1,308 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <limits.h>
+#include <string.h>
+
+#include "test.h"
+
+#include <rte_power.h>
+#include <rte_config.h>
+
+#define TEST_POWER_VM_LCORE_ID 0U
+#define TEST_POWER_VM_LCORE_OUT_OF_BOUNDS (RTE_MAX_LCORE+1)
+#define TEST_POWER_VM_LCORE_INVALID 1U
+
+static int
+test_power_kvm_vm(void)
+{
+ int ret;
+ enum power_management_env env;
+
+ ret = rte_power_set_env(PM_ENV_KVM_VM);
+ if (ret != 0) {
+ printf("Failed on setting environment to PM_ENV_KVM_VM\n");
+ return -1;
+ }
+
+ /* Test environment configuration */
+ env = rte_power_get_env();
+ if (env != PM_ENV_KVM_VM) {
+ printf("Unexpectedly got a Power Management environment other than "
+ "KVM VM\n");
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* verify that function pointers are not NULL */
+ if (rte_power_freqs == NULL) {
+ printf("rte_power_freqs should not be NULL, environment has not been "
+ "initialised\n");
+ return -1;
+ }
+ if (rte_power_get_freq == NULL) {
+ printf("rte_power_get_freq should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_set_freq == NULL) {
+ printf("rte_power_set_freq should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_up == NULL) {
+ printf("rte_power_freq_up should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_down == NULL) {
+ printf("rte_power_freq_down should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_max == NULL) {
+ printf("rte_power_freq_max should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_min == NULL) {
+ printf("rte_power_freq_min should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ /* Test initialisation of an out of bounds lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret != -1) {
+ printf("rte_power_init unexpectedly succeeded on an invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* Test initialisation of a valid lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_ID);
+ if (ret < 0) {
+ printf("Cannot initialise power management for lcore %u, this "
+ "may occur if environment is not configured "
+ "correctly(KVM VM) or operating in another valid "
+ "Power management environment\n", TEST_POWER_VM_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* Test initialisation of previously initialised lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_init unexpectedly succeeded on calling init twice on"
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency up of invalid lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_up unexpectedly succeeded on invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency down of invalid lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_down unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency min of invalid lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_min unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency max of invalid lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_max unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency up of valid but uninitialised lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_up unexpectedly succeeded on invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency down of valid but uninitialised lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_down unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency min of valid but uninitialised lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_min unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency max of valid but uninitialised lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_max unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency up of valid lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_up unexpectedly failed on valid lcore %u\n",
+ TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency down of valid lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_down unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency min of valid lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_min unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency max of valid lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_max unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test unsupported rte_power_freqs */
+ ret = rte_power_freqs(TEST_POWER_VM_LCORE_ID, NULL, 0);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_freqs did not return the expected -ENOTSUP(%d) but "
+ "returned %d\n", -ENOTSUP, ret);
+ goto fail_all;
+ }
+
+ /* Test unsupported rte_power_get_freq */
+ ret = rte_power_get_freq(TEST_POWER_VM_LCORE_ID);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_get_freq did not return the expected -ENOTSUP(%d) but"
+ " returned %d for lcore %u\n",
+ -ENOTSUP, ret, TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test unsupported rte_power_set_freq */
+ ret = rte_power_set_freq(TEST_POWER_VM_LCORE_ID, 0);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_set_freq did not return the expected -ENOTSUP(%d) but"
+ " returned %d for lcore %u\n",
+ -ENOTSUP, ret, TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test removing of an lcore */
+ ret = rte_power_exit(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_exit unexpectedly failed on valid lcore %u,"
+ "please ensure that the environment has been configured "
+ "correctly\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency up of previously removed lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_up unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency down of previously removed lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_down unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency min of previously removed lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_min unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency max of previously removed lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_max unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+ rte_power_unset_env();
+ return 0;
+fail_all:
+ rte_power_exit(TEST_POWER_VM_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+}
+
+static struct test_command power_kvm_vm_cmd = {
+ .command = "power_kvm_vm_autotest",
+ .callback = test_power_kvm_vm,
+};
+REGISTER_TEST_COMMAND(power_kvm_vm_cmd);
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* Re: [dpdk-dev] [PATCH v2 00/10] VM Power Management
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (9 preceding siblings ...)
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 10/10] VM Power Management Unit Tests Alan Carew
@ 2014-09-25 2:56 ` Liu, Yong
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
11 siblings, 0 replies; 97+ messages in thread
From: Liu, Yong @ 2014-09-25 2:56 UTC (permalink / raw)
To: dev
Tested-by: Liu Yong <yong.liu at intel.com>
This patch set has been tested by Intel.
Please see information as the following:
Host:
OS : Fedora 20 x86_64
Kernel : 3.11.10-301
GCC : 4.8.3
CPU : Intel Xeon CPU E5-2680 v2 @ 2.80GHz
NIC : Intel Niantic 82599
Qemu : 1.6.2
Libvirt :1.1.3
Guest:
OS : Fedora 20 x86_64
Kernel : 3.11.10-301
GCC : 4.8.3
We verified vm power management by unit test and function test.
The detail information is listed below.
vm power unit test Passed
vm power channel connected Passed
vm power frequency max Passed
vm power frequency min Passed
vm power frequency up Passed
vm power frequency down Passed
vm power l3fwd-power Passed
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Alan Carew
> Sent: Thursday, September 25, 2014 1:26 AM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v2 00/10] VM Power Management
>
> Virtual Machine Power Management.
>
> The following patches add two DPDK sample applications and an alternate
> implementation of librte_power for use in virtualized environments.
> The idea is to provide librte_power functionality from within a VM to address
> the lack of MSRs to facilitate frequency changes from within a VM.
> It is ideally suited for Haswell which provides per core frequency scaling.
>
> The current librte_power affects frequency changes via the acpi-cpufreq
> 'userspace' power governor, accessed via sysfs.
>
> General Overview:(more information in each patch that follows).
> The VM Power Management solution provides two components:
>
> 1)VM: Allows for the a DPDK application in a VM to reuse the librte_power
> interface. Each lcore opens a Virto-Serial endpoint channel to the host,
> where the re-implementation of librte_power simply forwards the requests
> for
> frequency change to a host based monitor. The host monitor itself uses
> librte_power.
> Each lcore channel corresponds to a
> serial device '/dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>'
> which is opened in non-blocking mode.
> While each Virtual CPU can be mapped to multiple physical CPUs it is
> recommended that each vCPU should be mapped to a single core only.
>
> 2)Host: The host monitor is managed by a CLI, it allows for adding qemu/KVM
> virtual machines and associated channels to the monitor, manually changing
> CPU frequency, inspecting the state of VMs, vCPU to pCPU pinning and
> managing
> channels.
> Host channel endpoints are Virto-Serial endpoints configured as AF_UNIX file
> sockets which follow a specific naming convention
> i.e /tmp/powermonitor/<vm_name>.<channel_number>,
> each channel has an 1:1 mapping to a VM endpoint
> i.e. /dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>
> Host channel endpoints are opened in non-blocking mode and are monitored
> via epoll.
> Requests over each channel to change frequency are forwarded to the
> original
> librte_power.
>
> Channels must be manually configured as qemu-kvm command line arguments
> or
> libvirt domain definition(xml) e.g.
> <controller type='virtio-serial' index='0'>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
> </controller>
> <channel type='unix'>
> <source mode='bind'
> path='/tmp/powermonitor/<vm_name>.<channel_num>'/>
> <target type='virtio' name='virtio.serial.port.poweragent.<channel_num>/>
> <address type='virtio-serial' controller='0' bus='0' port='<N>'/>
> </channel>
>
> Where multiple channels can be configured by specifying multiple <channel>
> elements, by replacing <vm_name>, <channel_num>.
> <N>(port number) should be incremented by 1 for each new channel
> element.
> More information on Virtio-Serial can be found here:
> http://fedoraproject.org/wiki/Features/VirtioSerial
> To enable the Hypervisor creation of channels, the host endpoint directory
> must be created with qemu permissions:
> mkdir /tmp/powermonitor
> chown qemu:qemu /tmp/powermonitor
>
> The host application runs on two separate lcores:
> Core N) CLI: For management of Virtual Machines adding channels to Monitor
> thread,
> inspecting state and manually setting CPU frequency [PATCH 02/09]
> Core N+1) Monitor Thread: An epoll based infinite loop that waits on channel
> events
> from VMs and calls the corresponding librte_power functions.
>
> A sample application is also provided to run on Virtual Machines, this
> application provides a CLI to manually set the frequency of a
> vCPU[PATCH 08/09]
>
> The current l3fwd-power sample application can also be run on a VM.
>
> Changes in V2:
> Runtime selection of librte_power implementations.
> Updated Unit tests to cover librte_power changes.
> PATCH[0/3] was sent twice, again as PATCH[0/4]
> Miscellaneous fixes.
>
> Alan Carew (10):
> Channel Manager and Monitor for VM Power Management(Host).
> VM Power Management CLI(Host).
> CPU Frequency Power Management(Host).
> VM Power Management application and Makefile.
> VM Power Management CLI(Guest).
> VM communication channels for VM Power Management(Guest).
> librte_power common interface for Guest and Host
> Packet format for VM Power Management(Host and Guest).
> Build system integration for VM Power Management(Guest and Host)
> VM Power Management Unit Tests
>
> app/test/Makefile | 3 +-
> app/test/autotest_data.py | 26 +
> app/test/test_power.c | 445 ++------------
> app/test/test_power_acpi_cpufreq.c | 544 +++++++++++++++++
> app/test/test_power_kvm_vm.c | 308 ++++++++++
> examples/vm_power_manager/Makefile | 57 ++
> examples/vm_power_manager/channel_manager.c | 645
> +++++++++++++++++++++
> examples/vm_power_manager/channel_manager.h | 273 +++++++++
> examples/vm_power_manager/channel_monitor.c | 228 ++++++++
> examples/vm_power_manager/channel_monitor.h | 102 ++++
> examples/vm_power_manager/guest_cli/Makefile | 56 ++
> examples/vm_power_manager/guest_cli/main.c | 86 +++
> examples/vm_power_manager/guest_cli/main.h | 52 ++
> .../guest_cli/vm_power_cli_guest.c | 155 +++++
> .../guest_cli/vm_power_cli_guest.h | 55 ++
> examples/vm_power_manager/main.c | 113 ++++
> examples/vm_power_manager/main.h | 52 ++
> examples/vm_power_manager/power_manager.c | 244 ++++++++
> examples/vm_power_manager/power_manager.h | 186 ++++++
> examples/vm_power_manager/vm_power_cli.c | 568
> ++++++++++++++++++
> examples/vm_power_manager/vm_power_cli.h | 47 ++
> lib/librte_power/Makefile | 3 +-
> lib/librte_power/channel_commands.h | 68 +++
> lib/librte_power/guest_channel.c | 162 ++++++
> lib/librte_power/guest_channel.h | 89 +++
> lib/librte_power/rte_power.c | 540 +++--------------
> lib/librte_power/rte_power.h | 120 +++-
> lib/librte_power/rte_power_acpi_cpufreq.c | 545
> +++++++++++++++++
> lib/librte_power/rte_power_acpi_cpufreq.h | 192 ++++++
> lib/librte_power/rte_power_common.h | 39 ++
> lib/librte_power/rte_power_kvm_vm.c | 160 +++++
> lib/librte_power/rte_power_kvm_vm.h | 179 ++++++
> 32 files changed, 5430 insertions(+), 912 deletions(-)
> create mode 100644 app/test/test_power_acpi_cpufreq.c
> create mode 100644 app/test/test_power_kvm_vm.c
> create mode 100644 examples/vm_power_manager/Makefile
> create mode 100644 examples/vm_power_manager/channel_manager.c
> create mode 100644 examples/vm_power_manager/channel_manager.h
> create mode 100644 examples/vm_power_manager/channel_monitor.c
> create mode 100644 examples/vm_power_manager/channel_monitor.h
> create mode 100644 examples/vm_power_manager/guest_cli/Makefile
> create mode 100644 examples/vm_power_manager/guest_cli/main.c
> create mode 100644 examples/vm_power_manager/guest_cli/main.h
> create mode 100644
> examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
> create mode 100644
> examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
> create mode 100644 examples/vm_power_manager/main.c
> create mode 100644 examples/vm_power_manager/main.h
> create mode 100644 examples/vm_power_manager/power_manager.c
> create mode 100644 examples/vm_power_manager/power_manager.h
> create mode 100644 examples/vm_power_manager/vm_power_cli.c
> create mode 100644 examples/vm_power_manager/vm_power_cli.h
> create mode 100644 lib/librte_power/channel_commands.h
> create mode 100644 lib/librte_power/guest_channel.c
> create mode 100644 lib/librte_power/guest_channel.h
> create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
> create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
> create mode 100644 lib/librte_power/rte_power_common.h
> create mode 100644 lib/librte_power/rte_power_kvm_vm.c
> create mode 100644 lib/librte_power/rte_power_kvm_vm.h
>
> --
> 1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* Re: [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host Alan Carew
@ 2014-09-25 10:10 ` Neil Horman
2014-09-25 17:06 ` Carew, Alan
0 siblings, 1 reply; 97+ messages in thread
From: Neil Horman @ 2014-09-25 10:10 UTC (permalink / raw)
To: Alan Carew; +Cc: dev
On Wed, Sep 24, 2014 at 06:26:13PM +0100, Alan Carew wrote:
> Moved the current librte_power implementation to rte_power_acpi_cpufreq, with
> renaming of functions only.
> Added rte_power_kvm_vm implmentation to support Power Management from a VM.
>
> librte_power now hides the implementation based on the environment used.
> A new call rte_power_set_env() can explicidly set the environment, if not
> called then auto-detection takes place.
>
> rte_power_kvm_vm is subset of the librte_power APIs, the following is supported:
> rte_power_init(unsigned lcore_id)
> rte_power_exit(unsigned lcore_id)
> rte_power_freq_up(unsigned lcore_id)
> rte_power_freq_down(unsigned lcore_id)
> rte_power_freq_min(unsigned lcore_id)
> rte_power_freq_max(unsigned lcore_id)
>
> The other unsupported APIs return -ENOTSUP
>
> Signed-off-by: Alan Carew <alan.carew@intel.com>
> ---
> lib/librte_power/rte_power.c | 540 ++++-------------------------
> lib/librte_power/rte_power.h | 120 +++++--
> lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++++++++++++++++++
> lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++++++++
> lib/librte_power/rte_power_common.h | 39 +++
> lib/librte_power/rte_power_kvm_vm.c | 160 +++++++++
> lib/librte_power/rte_power_kvm_vm.h | 179 ++++++++++
> 7 files changed, 1273 insertions(+), 502 deletions(-)
> create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
> create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
> create mode 100644 lib/librte_power/rte_power_common.h
> create mode 100644 lib/librte_power/rte_power_kvm_vm.c
> create mode 100644 lib/librte_power/rte_power_kvm_vm.h
>
> diff --git a/lib/librte_power/rte_power.c b/lib/librte_power/rte_power.c
> index 856da9a..998ed1c 100644
> --- a/lib/librte_power/rte_power.c
> +++ b/lib/librte_power/rte_power.c
> @@ -31,515 +31,113 @@
> * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> */
>
> -#include <stdio.h>
> -#include <sys/types.h>
> -#include <sys/stat.h>
> -#include <fcntl.h>
> -#include <stdlib.h>
> -#include <string.h>
> -#include <unistd.h>
> -#include <signal.h>
> -#include <limits.h>
> -
> -#include <rte_memcpy.h>
> #include <rte_atomic.h>
>
> #include "rte_power.h"
> +#include "rte_power_acpi_cpufreq.h"
> +#include "rte_power_kvm_vm.h"
> +#include "rte_power_common.h"
>
> -#ifdef RTE_LIBRTE_POWER_DEBUG
> -#define POWER_DEBUG_TRACE(fmt, args...) do { \
> - RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
> - } while (0)
> -#else
> -#define POWER_DEBUG_TRACE(fmt, args...)
> -#endif
> -
> -#define FOPEN_OR_ERR_RET(f, retval) do { \
> - if ((f) == NULL) { \
> - RTE_LOG(ERR, POWER, "File not openned\n"); \
> - return (retval); \
> - } \
> -} while(0)
> -
> -#define FOPS_OR_NULL_GOTO(ret, label) do { \
> - if ((ret) == NULL) { \
> - RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
> - goto label; \
> - } \
> -} while(0)
> -
> -#define FOPS_OR_ERR_GOTO(ret, label) do { \
> - if ((ret) < 0) { \
> - RTE_LOG(ERR, POWER, "File operations failed\n"); \
> - goto label; \
> - } \
> -} while(0)
> -
> -#define STR_SIZE 1024
> -#define POWER_CONVERT_TO_DECIMAL 10
> +enum power_management_env global_default_env = PM_ENV_NOT_SET;
>
> -#define POWER_GOVERNOR_USERSPACE "userspace"
> -#define POWER_SYSFILE_GOVERNOR \
> - "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
> -#define POWER_SYSFILE_AVAIL_FREQ \
> - "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
> -#define POWER_SYSFILE_SETSPEED \
> - "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
> +volatile uint32_t global_env_cfg_status = 0;
>
> -enum power_state {
> - POWER_IDLE = 0,
> - POWER_ONGOING,
> - POWER_USED,
> - POWER_UNKNOWN
> -};
> +/* function pointers */
> +rte_power_freqs_t rte_power_freqs = NULL;
> +rte_power_get_freq_t rte_power_get_freq = NULL;
> +rte_power_set_freq_t rte_power_set_freq = NULL;
> +rte_power_freq_change_t rte_power_freq_up = NULL;
> +rte_power_freq_change_t rte_power_freq_down = NULL;
> +rte_power_freq_change_t rte_power_freq_max = NULL;
> +rte_power_freq_change_t rte_power_freq_min = NULL;
>
> -/**
> - * Power info per lcore.
> - */
> -struct rte_power_info {
> - unsigned lcore_id; /**< Logical core id */
> - uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
> - uint32_t nb_freqs; /**< number of available freqs */
> - FILE *f; /**< FD of scaling_setspeed */
> - char governor_ori[32]; /**< Original governor name */
> - uint32_t curr_idx; /**< Freq index in freqs array */
> - volatile uint32_t state; /**< Power in use state */
> -} __rte_cache_aligned;
> -
> -static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
> -
> -/**
> - * It is to set specific freq for specific logical core, according to the index
> - * of supported frequencies.
> - */
> -static int
> -set_freq_internal(struct rte_power_info *pi, uint32_t idx)
> +int
> +rte_power_set_env(enum power_management_env env)
> {
> - if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
> - RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
> - "should be less than %u\n", idx, pi->nb_freqs);
> - return -1;
> - }
> -
> - /* Check if it is the same as current */
> - if (idx == pi->curr_idx)
> + if (rte_atomic32_cmpset(&global_env_cfg_status, 0, 1) == 0) {
> return 0;
> -
1 Nit here. If an invalid environment value is passed in on the first config
attempt here, you won't ever be able to set it. Maybe add some logic to return
us to an initial state if a value env isn't selected?
Neil
^ permalink raw reply [flat|nested] 97+ messages in thread
* Re: [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host
2014-09-25 10:10 ` Neil Horman
@ 2014-09-25 17:06 ` Carew, Alan
2014-09-25 17:49 ` Neil Horman
0 siblings, 1 reply; 97+ messages in thread
From: Carew, Alan @ 2014-09-25 17:06 UTC (permalink / raw)
To: Neil Horman; +Cc: dev
> -----Original Message-----
> From: Neil Horman [mailto:nhorman@tuxdriver.com]
> Sent: Thursday, September 25, 2014 11:10 AM
> To: Carew, Alan
> Cc: dev@dpdk.org
> Subject: Re: [PATCH v2 07/10] librte_power common interface for Guest and
> Host
>
> On Wed, Sep 24, 2014 at 06:26:13PM +0100, Alan Carew wrote:
> > Moved the current librte_power implementation to rte_power_acpi_cpufreq,
> with
> > renaming of functions only.
> > Added rte_power_kvm_vm implmentation to support Power Management
> from a VM.
> >
> > librte_power now hides the implementation based on the environment used.
> > A new call rte_power_set_env() can explicidly set the environment, if not
> > called then auto-detection takes place.
> >
> > rte_power_kvm_vm is subset of the librte_power APIs, the following is
> supported:
> > rte_power_init(unsigned lcore_id)
> > rte_power_exit(unsigned lcore_id)
> > rte_power_freq_up(unsigned lcore_id)
> > rte_power_freq_down(unsigned lcore_id)
> > rte_power_freq_min(unsigned lcore_id)
> > rte_power_freq_max(unsigned lcore_id)
> >
> > The other unsupported APIs return -ENOTSUP
> >
> > Signed-off-by: Alan Carew <alan.carew@intel.com>
> > ---
> > lib/librte_power/rte_power.c | 540 ++++-------------------------
> > lib/librte_power/rte_power.h | 120 +++++--
> > lib/librte_power/rte_power_acpi_cpufreq.c | 545
> ++++++++++++++++++++++++++++++
> > lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++++++++
> > lib/librte_power/rte_power_common.h | 39 +++
> > lib/librte_power/rte_power_kvm_vm.c | 160 +++++++++
> > lib/librte_power/rte_power_kvm_vm.h | 179 ++++++++++
> > 7 files changed, 1273 insertions(+), 502 deletions(-)
> > create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
> > create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
> > create mode 100644 lib/librte_power/rte_power_common.h
> > create mode 100644 lib/librte_power/rte_power_kvm_vm.c
> > create mode 100644 lib/librte_power/rte_power_kvm_vm.h
> >
> > diff --git a/lib/librte_power/rte_power.c b/lib/librte_power/rte_power.c
> > index 856da9a..998ed1c 100644
> > --- a/lib/librte_power/rte_power.c
> > +++ b/lib/librte_power/rte_power.c
> > @@ -31,515 +31,113 @@
> > * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> > */
> >
> > -#include <stdio.h>
> > -#include <sys/types.h>
> > -#include <sys/stat.h>
> > -#include <fcntl.h>
> > -#include <stdlib.h>
> > -#include <string.h>
> > -#include <unistd.h>
> > -#include <signal.h>
> > -#include <limits.h>
> > -
> > -#include <rte_memcpy.h>
> > #include <rte_atomic.h>
> >
> > #include "rte_power.h"
> > +#include "rte_power_acpi_cpufreq.h"
> > +#include "rte_power_kvm_vm.h"
> > +#include "rte_power_common.h"
> >
> > -#ifdef RTE_LIBRTE_POWER_DEBUG
> > -#define POWER_DEBUG_TRACE(fmt, args...) do { \
> > - RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
> > - } while (0)
> > -#else
> > -#define POWER_DEBUG_TRACE(fmt, args...)
> > -#endif
> > -
> > -#define FOPEN_OR_ERR_RET(f, retval) do { \
> > - if ((f) == NULL) { \
> > - RTE_LOG(ERR, POWER, "File not openned\n"); \
> > - return (retval); \
> > - } \
> > -} while(0)
> > -
> > -#define FOPS_OR_NULL_GOTO(ret, label) do { \
> > - if ((ret) == NULL) { \
> > - RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
> > - goto label; \
> > - } \
> > -} while(0)
> > -
> > -#define FOPS_OR_ERR_GOTO(ret, label) do { \
> > - if ((ret) < 0) { \
> > - RTE_LOG(ERR, POWER, "File operations failed\n"); \
> > - goto label; \
> > - } \
> > -} while(0)
> > -
> > -#define STR_SIZE 1024
> > -#define POWER_CONVERT_TO_DECIMAL 10
> > +enum power_management_env global_default_env = PM_ENV_NOT_SET;
> >
> > -#define POWER_GOVERNOR_USERSPACE "userspace"
> > -#define POWER_SYSFILE_GOVERNOR \
> > - "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
> > -#define POWER_SYSFILE_AVAIL_FREQ \
> > -
> "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencie
> s"
> > -#define POWER_SYSFILE_SETSPEED \
> > - "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
> > +volatile uint32_t global_env_cfg_status = 0;
> >
> > -enum power_state {
> > - POWER_IDLE = 0,
> > - POWER_ONGOING,
> > - POWER_USED,
> > - POWER_UNKNOWN
> > -};
> > +/* function pointers */
> > +rte_power_freqs_t rte_power_freqs = NULL;
> > +rte_power_get_freq_t rte_power_get_freq = NULL;
> > +rte_power_set_freq_t rte_power_set_freq = NULL;
> > +rte_power_freq_change_t rte_power_freq_up = NULL;
> > +rte_power_freq_change_t rte_power_freq_down = NULL;
> > +rte_power_freq_change_t rte_power_freq_max = NULL;
> > +rte_power_freq_change_t rte_power_freq_min = NULL;
> >
> > -/**
> > - * Power info per lcore.
> > - */
> > -struct rte_power_info {
> > - unsigned lcore_id; /**< Logical core id */
> > - uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
> > - uint32_t nb_freqs; /**< number of available freqs */
> > - FILE *f; /**< FD of scaling_setspeed */
> > - char governor_ori[32]; /**< Original governor name */
> > - uint32_t curr_idx; /**< Freq index in freqs array */
> > - volatile uint32_t state; /**< Power in use state */
> > -} __rte_cache_aligned;
> > -
> > -static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
> > -
> > -/**
> > - * It is to set specific freq for specific logical core, according to the index
> > - * of supported frequencies.
> > - */
> > -static int
> > -set_freq_internal(struct rte_power_info *pi, uint32_t idx)
> > +int
> > +rte_power_set_env(enum power_management_env env)
> > {
> > - if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
> > - RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
> > - "should be less than %u\n", idx, pi->nb_freqs);
> > - return -1;
> > - }
> > -
> > - /* Check if it is the same as current */
> > - if (idx == pi->curr_idx)
> > + if (rte_atomic32_cmpset(&global_env_cfg_status, 0, 1) == 0) {
> > return 0;
> > -
> 1 Nit here. If an invalid environment value is passed in on the first config
> attempt here, you won't ever be able to set it. Maybe add some logic to return
> us to an initial state if a value env isn't selected?
>
> Neil
Hi Neil,
I should have called it out in the commit, but there's also a rte_power_unset_env()
function that resets the environment that allows for retrying a different environment.
rte_power_unset_env() is also called when an invalid configuration is set.
Thanks,
Alan.
^ permalink raw reply [flat|nested] 97+ messages in thread
* Re: [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host
2014-09-25 17:06 ` Carew, Alan
@ 2014-09-25 17:49 ` Neil Horman
0 siblings, 0 replies; 97+ messages in thread
From: Neil Horman @ 2014-09-25 17:49 UTC (permalink / raw)
To: Carew, Alan; +Cc: dev
On Thu, Sep 25, 2014 at 05:06:11PM +0000, Carew, Alan wrote:
> > -----Original Message-----
> > From: Neil Horman [mailto:nhorman@tuxdriver.com]
> > Sent: Thursday, September 25, 2014 11:10 AM
> > To: Carew, Alan
> > Cc: dev@dpdk.org
> > Subject: Re: [PATCH v2 07/10] librte_power common interface for Guest and
> > Host
> >
> > On Wed, Sep 24, 2014 at 06:26:13PM +0100, Alan Carew wrote:
> > > Moved the current librte_power implementation to rte_power_acpi_cpufreq,
> > with
> > > renaming of functions only.
> > > Added rte_power_kvm_vm implmentation to support Power Management
> > from a VM.
> > >
> > > librte_power now hides the implementation based on the environment used.
> > > A new call rte_power_set_env() can explicidly set the environment, if not
> > > called then auto-detection takes place.
> > >
> > > rte_power_kvm_vm is subset of the librte_power APIs, the following is
> > supported:
> > > rte_power_init(unsigned lcore_id)
> > > rte_power_exit(unsigned lcore_id)
> > > rte_power_freq_up(unsigned lcore_id)
> > > rte_power_freq_down(unsigned lcore_id)
> > > rte_power_freq_min(unsigned lcore_id)
> > > rte_power_freq_max(unsigned lcore_id)
> > >
> > > The other unsupported APIs return -ENOTSUP
> > >
> > > Signed-off-by: Alan Carew <alan.carew@intel.com>
> > > ---
> > > lib/librte_power/rte_power.c | 540 ++++-------------------------
> > > lib/librte_power/rte_power.h | 120 +++++--
> > > lib/librte_power/rte_power_acpi_cpufreq.c | 545
> > ++++++++++++++++++++++++++++++
> > > lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++++++++
> > > lib/librte_power/rte_power_common.h | 39 +++
> > > lib/librte_power/rte_power_kvm_vm.c | 160 +++++++++
> > > lib/librte_power/rte_power_kvm_vm.h | 179 ++++++++++
> > > 7 files changed, 1273 insertions(+), 502 deletions(-)
> > > create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
> > > create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
> > > create mode 100644 lib/librte_power/rte_power_common.h
> > > create mode 100644 lib/librte_power/rte_power_kvm_vm.c
> > > create mode 100644 lib/librte_power/rte_power_kvm_vm.h
> > >
> > > diff --git a/lib/librte_power/rte_power.c b/lib/librte_power/rte_power.c
> > > index 856da9a..998ed1c 100644
> > > --- a/lib/librte_power/rte_power.c
> > > +++ b/lib/librte_power/rte_power.c
> > > @@ -31,515 +31,113 @@
> > > * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> > DAMAGE.
> > > */
> > >
> > > -#include <stdio.h>
> > > -#include <sys/types.h>
> > > -#include <sys/stat.h>
> > > -#include <fcntl.h>
> > > -#include <stdlib.h>
> > > -#include <string.h>
> > > -#include <unistd.h>
> > > -#include <signal.h>
> > > -#include <limits.h>
> > > -
> > > -#include <rte_memcpy.h>
> > > #include <rte_atomic.h>
> > >
> > > #include "rte_power.h"
> > > +#include "rte_power_acpi_cpufreq.h"
> > > +#include "rte_power_kvm_vm.h"
> > > +#include "rte_power_common.h"
> > >
> > > -#ifdef RTE_LIBRTE_POWER_DEBUG
> > > -#define POWER_DEBUG_TRACE(fmt, args...) do { \
> > > - RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
> > > - } while (0)
> > > -#else
> > > -#define POWER_DEBUG_TRACE(fmt, args...)
> > > -#endif
> > > -
> > > -#define FOPEN_OR_ERR_RET(f, retval) do { \
> > > - if ((f) == NULL) { \
> > > - RTE_LOG(ERR, POWER, "File not openned\n"); \
> > > - return (retval); \
> > > - } \
> > > -} while(0)
> > > -
> > > -#define FOPS_OR_NULL_GOTO(ret, label) do { \
> > > - if ((ret) == NULL) { \
> > > - RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
> > > - goto label; \
> > > - } \
> > > -} while(0)
> > > -
> > > -#define FOPS_OR_ERR_GOTO(ret, label) do { \
> > > - if ((ret) < 0) { \
> > > - RTE_LOG(ERR, POWER, "File operations failed\n"); \
> > > - goto label; \
> > > - } \
> > > -} while(0)
> > > -
> > > -#define STR_SIZE 1024
> > > -#define POWER_CONVERT_TO_DECIMAL 10
> > > +enum power_management_env global_default_env = PM_ENV_NOT_SET;
> > >
> > > -#define POWER_GOVERNOR_USERSPACE "userspace"
> > > -#define POWER_SYSFILE_GOVERNOR \
> > > - "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
> > > -#define POWER_SYSFILE_AVAIL_FREQ \
> > > -
> > "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencie
> > s"
> > > -#define POWER_SYSFILE_SETSPEED \
> > > - "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
> > > +volatile uint32_t global_env_cfg_status = 0;
> > >
> > > -enum power_state {
> > > - POWER_IDLE = 0,
> > > - POWER_ONGOING,
> > > - POWER_USED,
> > > - POWER_UNKNOWN
> > > -};
> > > +/* function pointers */
> > > +rte_power_freqs_t rte_power_freqs = NULL;
> > > +rte_power_get_freq_t rte_power_get_freq = NULL;
> > > +rte_power_set_freq_t rte_power_set_freq = NULL;
> > > +rte_power_freq_change_t rte_power_freq_up = NULL;
> > > +rte_power_freq_change_t rte_power_freq_down = NULL;
> > > +rte_power_freq_change_t rte_power_freq_max = NULL;
> > > +rte_power_freq_change_t rte_power_freq_min = NULL;
> > >
> > > -/**
> > > - * Power info per lcore.
> > > - */
> > > -struct rte_power_info {
> > > - unsigned lcore_id; /**< Logical core id */
> > > - uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
> > > - uint32_t nb_freqs; /**< number of available freqs */
> > > - FILE *f; /**< FD of scaling_setspeed */
> > > - char governor_ori[32]; /**< Original governor name */
> > > - uint32_t curr_idx; /**< Freq index in freqs array */
> > > - volatile uint32_t state; /**< Power in use state */
> > > -} __rte_cache_aligned;
> > > -
> > > -static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
> > > -
> > > -/**
> > > - * It is to set specific freq for specific logical core, according to the index
> > > - * of supported frequencies.
> > > - */
> > > -static int
> > > -set_freq_internal(struct rte_power_info *pi, uint32_t idx)
> > > +int
> > > +rte_power_set_env(enum power_management_env env)
> > > {
> > > - if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
> > > - RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
> > > - "should be less than %u\n", idx, pi->nb_freqs);
> > > - return -1;
> > > - }
> > > -
> > > - /* Check if it is the same as current */
> > > - if (idx == pi->curr_idx)
> > > + if (rte_atomic32_cmpset(&global_env_cfg_status, 0, 1) == 0) {
> > > return 0;
> > > -
> > 1 Nit here. If an invalid environment value is passed in on the first config
> > attempt here, you won't ever be able to set it. Maybe add some logic to return
> > us to an initial state if a value env isn't selected?
> >
> > Neil
>
> Hi Neil,
>
> I should have called it out in the commit, but there's also a rte_power_unset_env()
> function that resets the environment that allows for retrying a different environment.
> rte_power_unset_env() is also called when an invalid configuration is set.
>
> Thanks,
> Alan.
>
Ok, that seems like an odd interface too me, but it works as well as anything
else.
Thanks!
Neil
>
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 00/10] VM Power Management
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
` (10 preceding siblings ...)
2014-09-25 2:56 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Liu, Yong
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
` (12 more replies)
11 siblings, 13 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
Virtual Machine Power Management.
The following patches add two DPDK sample applications and an alternate
implementation of librte_power for use in virtualized environments.
The idea is to provide librte_power functionality from within a VM to address
the lack of MSRs to facilitate frequency changes from within a VM.
It is ideally suited for Haswell which provides per core frequency scaling.
The current librte_power affects frequency changes via the acpi-cpufreq
'userspace' power governor, accessed via sysfs.
General Overview:(more information in each patch that follows).
The VM Power Management solution provides two components:
1)VM: Allows for the a DPDK application in a VM to reuse the librte_power
interface. Each lcore opens a Virto-Serial endpoint channel to the host,
where the re-implementation of librte_power simply forwards the requests for
frequency change to a host based monitor. The host monitor itself uses
librte_power.
Each lcore channel corresponds to a
serial device '/dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>'
which is opened in non-blocking mode.
While each Virtual CPU can be mapped to multiple physical CPUs it is
recommended that each vCPU should be mapped to a single core only.
2)Host: The host monitor is managed by a CLI, it allows for adding qemu/KVM
virtual machines and associated channels to the monitor, manually changing
CPU frequency, inspecting the state of VMs, vCPU to pCPU pinning and managing
channels.
Host channel endpoints are Virto-Serial endpoints configured as AF_UNIX file
sockets which follow a specific naming convention
i.e /tmp/powermonitor/<vm_name>.<channel_number>,
each channel has an 1:1 mapping to a VM endpoint
i.e. /dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>
Host channel endpoints are opened in non-blocking mode and are monitored via epoll.
Requests over each channel to change frequency are forwarded to the original
librte_power.
Channels must be manually configured as qemu-kvm command line arguments or
libvirt domain definition(xml) e.g.
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<channel type='unix'>
<source mode='bind' path='/tmp/powermonitor/<vm_name>.<channel_num>'/>
<target type='virtio' name='virtio.serial.port.poweragent.<channel_num>/>
<address type='virtio-serial' controller='0' bus='0' port='<N>'/>
</channel>
Where multiple channels can be configured by specifying multiple <channel>
elements, by replacing <vm_name>, <channel_num>.
<N>(port number) should be incremented by 1 for each new channel element.
More information on Virtio-Serial can be found here:
http://fedoraproject.org/wiki/Features/VirtioSerial
To enable the Hypervisor creation of channels, the host endpoint directory
must be created with qemu permissions:
mkdir /tmp/powermonitor
chown qemu:qemu /tmp/powermonitor
The host application runs on two separate lcores:
Core N) CLI: For management of Virtual Machines adding channels to Monitor thread,
inspecting state and manually setting CPU frequency [PATCH 02/09]
Core N+1) Monitor Thread: An epoll based infinite loop that waits on channel events
from VMs and calls the corresponding librte_power functions.
A sample application is also provided to run on Virtual Machines, this
application provides a CLI to manually set the frequency of a
vCPU[PATCH 08/09]
The current l3fwd-power sample application can also be run on a VM.
Changes in V3:
Fixed crash in Guest CLI when host application is not running.
Renamed #defines to be more specific to the module they belong
Added vCPU pinning via CLI
Testing feedback
Changes in V2:
Runtime selection of librte_power implementations.
Updated Unit tests to cover librte_power changes.
PATCH[0/3] was sent twice, again as PATCH[0/4]
Miscellaneous fixes.
Alan Carew (10):
Channel Manager and Monitor for VM Power Management(Host).
VM Power Management CLI(Host).
CPU Frequency Power Management(Host).
VM Power Management application and Makefile.
VM Power Management CLI(Guest).
VM communication channels for VM Power Management(Guest).
librte_power common interface for Guest and Host
Packet format for VM Power Management(Host and Guest).
Build system integration for VM Power Management(Guest and Host)
VM Power Management Unit Tests
app/test/Makefile | 3 +-
app/test/autotest_data.py | 26 +
app/test/test_power.c | 445 +-----------
app/test/test_power_acpi_cpufreq.c | 544 ++++++++++++++
app/test/test_power_kvm_vm.c | 308 ++++++++
examples/vm_power_manager/Makefile | 57 ++
examples/vm_power_manager/channel_manager.c | 804 +++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 314 ++++++++
examples/vm_power_manager/channel_monitor.c | 228 ++++++
examples/vm_power_manager/channel_monitor.h | 102 +++
examples/vm_power_manager/guest_cli/Makefile | 56 ++
examples/vm_power_manager/guest_cli/main.c | 87 +++
examples/vm_power_manager/guest_cli/main.h | 52 ++
.../guest_cli/vm_power_cli_guest.c | 155 ++++
.../guest_cli/vm_power_cli_guest.h | 55 ++
examples/vm_power_manager/main.c | 113 +++
examples/vm_power_manager/main.h | 52 ++
examples/vm_power_manager/power_manager.c | 244 +++++++
examples/vm_power_manager/power_manager.h | 188 +++++
examples/vm_power_manager/vm_power_cli.c | 669 +++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 ++
lib/librte_power/Makefile | 3 +-
lib/librte_power/channel_commands.h | 77 ++
lib/librte_power/guest_channel.c | 162 +++++
lib/librte_power/guest_channel.h | 89 +++
lib/librte_power/rte_power.c | 540 ++------------
lib/librte_power/rte_power.h | 120 ++-
lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++
lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++
lib/librte_power/rte_power_common.h | 39 +
lib/librte_power/rte_power_kvm_vm.c | 135 ++++
lib/librte_power/rte_power_kvm_vm.h | 179 +++++
32 files changed, 5718 insertions(+), 912 deletions(-)
create mode 100644 app/test/test_power_acpi_cpufreq.c
create mode 100644 app/test/test_power_kvm_vm.c
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
create mode 100644 lib/librte_power/channel_commands.h
create mode 100644 lib/librte_power/guest_channel.c
create mode 100644 lib/librte_power/guest_channel.h
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
create mode 100644 lib/librte_power/rte_power_common.h
create mode 100644 lib/librte_power/rte_power_kvm_vm.c
create mode 100644 lib/librte_power/rte_power_kvm_vm.h
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 01/10] Channel Manager and Monitor for VM Power Management(Host).
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 02/10] VM Power Management CLI(Host) Alan Carew
` (11 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
The manager is responsible for adding communications channels to the Monitor
thread, tracking and reporting VM state and employs the libvirt API for
synchronization with the KVM Hypervisor. The manager interacts with the
Hypervisor to discover the mapping of virtual CPUS(vCPUs) to the host
physical CPUS(pCPUs) and to inspect the VM running state.
The manager provides the following functionality to the CLI:
1) Connect to a libvirtd instance, default: qemu:///system
2) Add a VM to an internal list, each VM is identified by a "name" which must
correspond a valid libvirt Domain Name.
3) Add communication channels associated with a VM to the epoll based Monitor
thread.
The channels must exist and be in the form of:
/tmp/powermonitor/<vm_name>.<channel_number>. Each channel is a
Virtio-Serial endpoint configured as an AF_UNIX file socket and opened in
non-blocking mode.
Each VM can have a maximum of 64 channels associated with it.
4) Disable or re-enable VM communication channels, channels once added to the
Monitor thread remain in that threads control, however acting on channel
requests can be disabled and renabled via CLI.
The monitor is an epoll based infinite loop running in a separate thread that
waits on channel events from VMs and calls the corresponding functions. Channel
definitions from the manager are registered via the epoll event opaque pointer
when calling epoll_ctl(EPOLL_CTL_ADD), this allows for obtaining the channels
file descriptor for reading EPOLLIN events and mapping the vCPU to pCPU(s)
associated with a request from a particular VM.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/channel_manager.c | 804 ++++++++++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 314 +++++++++++
examples/vm_power_manager/channel_monitor.c | 228 ++++++++
examples/vm_power_manager/channel_monitor.h | 102 ++++
4 files changed, 1448 insertions(+)
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
diff --git a/examples/vm_power_manager/channel_manager.c b/examples/vm_power_manager/channel_manager.c
new file mode 100644
index 0000000..a14f191
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.c
@@ -0,0 +1,804 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+
+#include <rte_config.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+#include <rte_log.h>
+#include <rte_atomic.h>
+#include <rte_spinlock.h>
+
+#include <libvirt/libvirt.h>
+
+#include "channel_manager.h"
+#include "channel_commands.h"
+#include "channel_monitor.h"
+
+
+#define RTE_LOGTYPE_CHANNEL_MANAGER RTE_LOGTYPE_USER1
+
+#define ITERATIVE_BITMASK_CHECK_64(mask_u64b, i) \
+ for (i = 0; mask_u64b; mask_u64b &= ~(1ULL << i++)) \
+ if ((mask_u64b >> i) & 1) \
+
+/* Global pointer to libvirt connection */
+static virConnectPtr global_vir_conn_ptr;
+
+static unsigned char *global_cpumaps;
+static virVcpuInfo *global_vircpuinfo;
+static size_t global_maplen;
+
+static unsigned global_n_host_cpus;
+
+/*
+ * Represents a single Virtual Machine
+ */
+struct virtual_machine_info {
+ char name[CHANNEL_MGR_MAX_NAME_LEN];
+ rte_atomic64_t pcpu_mask[CHANNEL_CMDS_MAX_CPUS];
+ struct channel_info *channels[CHANNEL_CMDS_MAX_VM_CHANNELS];
+ uint64_t channel_mask;
+ uint8_t num_channels;
+ enum vm_status status;
+ virDomainPtr domainPtr;
+ virDomainInfo info;
+ rte_spinlock_t config_spinlock;
+ LIST_ENTRY(virtual_machine_info) vms_info;
+};
+
+LIST_HEAD(, virtual_machine_info) vm_list_head;
+
+static struct virtual_machine_info *
+find_domain_by_name(const char *name)
+{
+ struct virtual_machine_info *info;
+ LIST_FOREACH(info, &vm_list_head, vms_info) {
+ if (!strncmp(info->name, name, CHANNEL_MGR_MAX_NAME_LEN-1))
+ return info;
+ }
+ return NULL;
+}
+
+static int
+update_pcpus_mask(struct virtual_machine_info *vm_info)
+{
+ virVcpuInfoPtr cpuinfo;
+ unsigned i, j;
+ int n_vcpus;
+ uint64_t mask;
+
+ memset(global_cpumaps, 0, CHANNEL_CMDS_MAX_CPUS*global_maplen);
+
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ n_vcpus = virDomainGetVcpuPinInfo(vm_info->domainPtr,
+ vm_info->info.nrVirtCpu, global_cpumaps, global_maplen,
+ VIR_DOMAIN_AFFECT_CONFIG);
+ if (n_vcpus < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting vCPU info for "
+ "in-active VM '%s'\n", vm_info->name);
+ return -1;
+ }
+ goto update_pcpus;
+ }
+
+ memset(global_vircpuinfo, 0, sizeof(*global_vircpuinfo)*
+ CHANNEL_CMDS_MAX_CPUS);
+
+ cpuinfo = global_vircpuinfo;
+
+ n_vcpus = virDomainGetVcpus(vm_info->domainPtr, cpuinfo,
+ CHANNEL_CMDS_MAX_CPUS, global_cpumaps, global_maplen);
+ if (n_vcpus < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting vCPU info for "
+ "active VM '%s'\n", vm_info->name);
+ return -1;
+ }
+update_pcpus:
+ if (n_vcpus >= CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Number of vCPUS(%u) is out of range "
+ "0...%d\n", n_vcpus, CHANNEL_CMDS_MAX_CPUS-1);
+ return -1;
+ }
+ if (n_vcpus != vm_info->info.nrVirtCpu) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Updating the number of vCPUs for VM '%s"
+ " from %d -> %d\n", vm_info->name, vm_info->info.nrVirtCpu,
+ n_vcpus);
+ vm_info->info.nrVirtCpu = n_vcpus;
+ }
+ for (i = 0; i < vm_info->info.nrVirtCpu; i++) {
+ mask = 0;
+ for (j = 0; j < global_n_host_cpus; j++) {
+ if (VIR_CPU_USABLE(global_cpumaps, global_maplen, i, j) > 0) {
+ mask |= 1ULL << j;
+ }
+ }
+ rte_atomic64_set(&vm_info->pcpu_mask[i], mask);
+ }
+ return 0;
+}
+
+int
+set_pcpus_mask(char *vm_name, unsigned vcpu, uint64_t core_mask)
+{
+ unsigned i = 0;
+ int flags = VIR_DOMAIN_AFFECT_LIVE|VIR_DOMAIN_AFFECT_CONFIG;
+ struct virtual_machine_info *vm_info;
+ uint64_t mask = core_mask;
+
+ if (vcpu >= CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "vCPU(%u) exceeds max allowable(%d)\n",
+ vcpu, CHANNEL_CMDS_MAX_CPUS-1);
+ return -1;
+ }
+
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to set vCPU(%u) to pCPU "
+ "mask(0x%"PRIx64") for VM '%s', VM is not active\n",
+ vcpu, core_mask, vm_info->name);
+ return -1;
+ }
+
+ if (vcpu >= vm_info->info.nrVirtCpu) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "vCPU(%u) exceeds the assigned number of "
+ "vCPUs(%u)\n", vcpu, vm_info->info.nrVirtCpu);
+ return -1;
+ }
+ memset(global_cpumaps, 0 , CHANNEL_CMDS_MAX_CPUS * global_maplen);
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ VIR_USE_CPU(global_cpumaps, i);
+ if (i >= global_n_host_cpus) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "CPU(%u) exceeds the available "
+ "number of CPUs(%u)\n", i, global_n_host_cpus);
+ return -1;
+ }
+ }
+ if (virDomainPinVcpuFlags(vm_info->domainPtr, vcpu, global_cpumaps,
+ global_maplen, flags) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to set vCPU(%u) to pCPU "
+ "mask(0x%"PRIx64") for VM '%s'\n", vcpu, core_mask,
+ vm_info->name);
+ return -1;
+ }
+ rte_atomic64_set(&vm_info->pcpu_mask[vcpu], core_mask);
+ return 0;
+
+}
+
+int
+set_pcpu(char *vm_name, unsigned vcpu, unsigned core_num)
+{
+ uint64_t mask = 1ULL << core_num;
+ return set_pcpus_mask(vm_name, vcpu, mask);
+}
+
+uint64_t
+get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu)
+{
+ struct virtual_machine_info *vm_info =
+ (struct virtual_machine_info *)chan_info->priv_info;
+ return rte_atomic64_read(&vm_info->pcpu_mask[vcpu]);
+}
+
+static inline int
+channel_exists(struct virtual_machine_info *vm_info, unsigned channel_num)
+{
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ if (vm_info->channel_mask & (1ULL << channel_num)) {
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 1;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+
+
+static int
+open_non_blocking_channel(struct channel_info *info)
+{
+ int ret, flags;
+ struct sockaddr_un sock_addr;
+ fd_set soc_fd_set;
+ struct timeval tv;
+
+ info->fd = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (info->fd == -1) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error(%s) creating socket for '%s'\n",
+ strerror(errno),
+ info->channel_path);
+ return -1;
+ }
+ sock_addr.sun_family = AF_UNIX;
+ memcpy(&sock_addr.sun_path, info->channel_path,
+ strlen(info->channel_path)+1);
+
+ /* Get current flags */
+ flags = fcntl(info->fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) fcntl get flags socket for"
+ "'%s'\n", strerror(errno), info->channel_path);
+ return 1;
+ }
+ /* Set to Non Blocking */
+ flags |= O_NONBLOCK;
+ if (fcntl(info->fd, F_SETFL, flags) < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) setting non-blocking "
+ "socket for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ ret = connect(info->fd, (struct sockaddr *)&sock_addr,
+ sizeof(sock_addr));
+ if (ret < 0) {
+ /* ECONNREFUSED error is given when VM is not active */
+ if (errno == ECONNREFUSED) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "VM is not active or has not "
+ "activated its endpoint to channel %s\n",
+ info->channel_path);
+ return -1;
+ }
+ /* Wait for tv_sec if in progress */
+ else if (errno == EINPROGRESS) {
+ tv.tv_sec = 2;
+ tv.tv_usec = 0;
+ FD_ZERO(&soc_fd_set);
+ FD_SET(info->fd, &soc_fd_set);
+ if (select(info->fd+1, NULL, &soc_fd_set, NULL, &tv) > 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Timeout or error on channel "
+ "'%s'\n", info->channel_path);
+ return -1;
+ }
+ } else {
+ /* Any other error */
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) connecting socket"
+ " for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int
+setup_channel_info(struct virtual_machine_info **vm_info_dptr,
+ struct channel_info **chan_info_dptr, unsigned channel_num)
+{
+ struct channel_info *chan_info = *chan_info_dptr;
+ struct virtual_machine_info *vm_info = *vm_info_dptr;
+
+ chan_info->channel_num = channel_num;
+ chan_info->priv_info = (void *)vm_info;
+ chan_info->status = CHANNEL_MGR_CHANNEL_DISCONNECTED;
+ if (open_non_blocking_channel(chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could not open channel: "
+ "'%s' for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+ }
+ if (add_channel_to_monitor(&chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could add channel: "
+ "'%s' to epoll ctl for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+
+ }
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->num_channels++;
+ vm_info->channel_mask |= 1ULL << channel_num;
+ vm_info->channels[channel_num] = chan_info;
+ chan_info->status = CHANNEL_MGR_CHANNEL_CONNECTED;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+int
+add_all_channels(const char *vm_name)
+{
+ DIR *d;
+ struct dirent *dir;
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char *token, *remaining, *tail_ptr;
+ char socket_name[PATH_MAX];
+ unsigned channel_num;
+ int num_channels_enabled = 0;
+
+ /* verify VM exists */
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' not found"
+ " during channel discovery\n", vm_name);
+ return 0;
+ }
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = CHANNEL_MGR_VM_INACTIVE;
+ return 0;
+ }
+ d = opendir(CHANNEL_MGR_SOCKET_PATH);
+ if (d == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error opening directory '%s': %s\n",
+ CHANNEL_MGR_SOCKET_PATH, strerror(errno));
+ return -1;
+ }
+ while ((dir = readdir(d)) != NULL) {
+ if (!strncmp(dir->d_name, ".", 1) ||
+ !strncmp(dir->d_name, "..", 2))
+ continue;
+
+ snprintf(socket_name, sizeof(socket_name), "%s", dir->d_name);
+ remaining = socket_name;
+ /* Extract vm_name from "<vm_name>.<channel_num>" */
+ token = strsep(&remaining, ".");
+ if (remaining == NULL)
+ continue;
+ if (strncmp(vm_name, token, CHANNEL_MGR_MAX_NAME_LEN))
+ continue;
+
+ /* remaining should contain only <channel_num> */
+ errno = 0;
+ channel_num = (unsigned)strtol(remaining, &tail_ptr, 0);
+ if ((errno != 0) || (remaining[0] == '\0') ||
+ (*tail_ptr != '\0') || tail_ptr == NULL) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Malformed channel name"
+ "'%s' found it should be in the form of "
+ "'<guest_name>.<channel_num>(decimal)'\n",
+ dir->d_name);
+ continue;
+ }
+ if (channel_num >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Channel number(%u) is "
+ "greater than max allowable: %d, skipping '%s%s'\n",
+ channel_num, CHANNEL_CMDS_MAX_VM_CHANNELS-1,
+ CHANNEL_MGR_SOCKET_PATH, dir->d_name);
+ continue;
+ }
+ /* if channel has not been added previously */
+ if (channel_exists(vm_info, channel_num))
+ continue;
+
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s%s'\n", CHANNEL_MGR_SOCKET_PATH, dir->d_name);
+ continue;
+ }
+
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s",
+ CHANNEL_MGR_SOCKET_PATH, dir->d_name);
+
+ if (setup_channel_info(&vm_info, &chan_info, channel_num) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+
+ num_channels_enabled++;
+ }
+ closedir(d);
+ return num_channels_enabled;
+}
+
+int
+add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list)
+{
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char socket_path[PATH_MAX];
+ unsigned i;
+ int num_channels_enabled = 0;
+
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = CHANNEL_MGR_VM_INACTIVE;
+ return 0;
+ }
+
+ for (i = 0; i < len_channel_list; i++) {
+
+ if (channel_list[i] >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Channel(%u) is out of range "
+ "0...%d\n", channel_list[i],
+ CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+ continue;
+ }
+ if (channel_exists(vm_info, channel_list[i])) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Channel already exists, skipping "
+ "'%s.%u'\n", vm_name, i);
+ continue;
+ }
+
+ snprintf(socket_path, sizeof(socket_path), "%s%s.%u",
+ CHANNEL_MGR_SOCKET_PATH, vm_name, channel_list[i]);
+ errno = 0;
+ if (access(socket_path, F_OK) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channel path '%s' error: "
+ "%s\n", socket_path, strerror(errno));
+ continue;
+ }
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s'\n", socket_path);
+ continue;
+ }
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s.%u",
+ CHANNEL_MGR_SOCKET_PATH, vm_name, channel_list[i]);
+ if (setup_channel_info(&vm_info, &chan_info, channel_list[i]) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+ num_channels_enabled++;
+
+ }
+ return num_channels_enabled;
+}
+
+int
+remove_channel(struct channel_info **chan_info_dptr)
+{
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info = *chan_info_dptr;
+
+ close(chan_info->fd);
+
+ vm_info = (struct virtual_machine_info *)chan_info->priv_info;
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channel_mask &= ~(1ULL << chan_info->channel_num);
+ vm_info->num_channels--;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ rte_free(chan_info);
+ return 0;
+}
+
+int
+set_channel_status_all(const char *vm_name, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i;
+ uint64_t mask;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_MGR_CHANNEL_CONNECTED ||
+ status == CHANNEL_MGR_CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to disable channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ vm_info->channels[i]->status = status;
+ num_channels_changed++;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return num_channels_changed;
+
+}
+
+int
+set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_MGR_CHANNEL_CONNECTED ||
+ status == CHANNEL_MGR_CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+ for (i = 0; i < len_channel_list; i++) {
+ if (channel_exists(vm_info, channel_list[i])) {
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channels[channel_list[i]]->status = status;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ num_channels_changed++;
+ }
+ }
+ return num_channels_changed;
+}
+
+int
+get_info_vm(const char *vm_name, struct vm_info *info)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i, channel_num = 0;
+ uint64_t mask;
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+ info->status = CHANNEL_MGR_VM_ACTIVE;
+ if (!virDomainIsActive(vm_info->domainPtr))
+ info->status = CHANNEL_MGR_VM_INACTIVE;
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ info->channels[channel_num].channel_num = i;
+ memcpy(info->channels[channel_num].channel_path,
+ vm_info->channels[i]->channel_path, PATH_MAX);
+ info->channels[channel_num].status = vm_info->channels[i]->status;
+ info->channels[channel_num].fd = vm_info->channels[i]->fd;
+ channel_num++;
+ }
+
+ info->num_channels = channel_num;
+ info->num_vcpus = vm_info->info.nrVirtCpu;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ memcpy(info->name, vm_info->name, sizeof(vm_info->name));
+ for (i = 0; i < info->num_vcpus; i++) {
+ info->pcpu_mask[i] = rte_atomic64_read(&vm_info->pcpu_mask[i]);
+ }
+ return 0;
+}
+
+int
+add_vm(const char *vm_name)
+{
+ struct virtual_machine_info *new_domain;
+ virDomainPtr dom_ptr;
+ int i;
+
+ if (find_domain_by_name(vm_name) != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add VM: VM '%s' "
+ "already exists\n", vm_name);
+ return -1;
+ }
+
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "No connection to hypervisor exists\n");
+ return -1;
+ }
+ dom_ptr = virDomainLookupByName(global_vir_conn_ptr, vm_name);
+ if (dom_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error on VM lookup with libvirt: "
+ "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+
+ new_domain = rte_malloc("virtual_machine_info", sizeof(*new_domain),
+ CACHE_LINE_SIZE);
+ if (new_domain == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to allocate memory for VM "
+ "info\n");
+ return -1;
+ }
+ new_domain->domainPtr = dom_ptr;
+ if (virDomainGetInfo(new_domain->domainPtr, &new_domain->info) != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to get libvirt VM info\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ if (new_domain->info.nrVirtCpu > CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error the number of virtual CPUs(%u) is "
+ "greater than allowable(%d)\n", new_domain->info.nrVirtCpu,
+ CHANNEL_CMDS_MAX_CPUS);
+ rte_free(new_domain);
+ return -1;
+ }
+
+ for (i = 0; i < CHANNEL_CMDS_MAX_CPUS; i++) {
+ rte_atomic64_init(&new_domain->pcpu_mask[i]);
+ }
+ if (update_pcpus_mask(new_domain) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting physical CPU pinning\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ strncpy(new_domain->name, vm_name, sizeof(new_domain->name));
+ new_domain->channel_mask = 0;
+ new_domain->num_channels = 0;
+
+ if (!virDomainIsActive(dom_ptr))
+ new_domain->status = CHANNEL_MGR_VM_INACTIVE;
+ else
+ new_domain->status = CHANNEL_MGR_VM_ACTIVE;
+
+ rte_spinlock_init(&(new_domain->config_spinlock));
+ LIST_INSERT_HEAD(&vm_list_head, new_domain, vms_info);
+ return 0;
+}
+
+int
+remove_vm(const char *vm_name)
+{
+ struct virtual_machine_info *vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM: VM '%s' "
+ "not found\n", vm_name);
+ return -1;
+ }
+ rte_spinlock_lock(&vm_info->config_spinlock);
+ if (vm_info->num_channels != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM '%s', there are "
+ "%"PRId8" channels still active\n",
+ vm_name, vm_info->num_channels);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ return -1;
+ }
+ LIST_REMOVE(vm_info, vms_info);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ rte_free(vm_info);
+ return 0;
+}
+
+static void
+disconnect_hypervisor(void)
+{
+ if (global_vir_conn_ptr != NULL) {
+ virConnectClose(global_vir_conn_ptr);
+ global_vir_conn_ptr = NULL;
+ }
+}
+
+static int
+connect_hypervisor(const char *path)
+{
+ if (global_vir_conn_ptr != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error connecting to %s, connection"
+ "already established\n", path);
+ return -1;
+ }
+ global_vir_conn_ptr = virConnectOpen(path);
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error failed to open connection to "
+ "Hypervisor '%s'\n", path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+channel_manager_init(const char *path)
+{
+ int n_cpus;
+ LIST_INIT(&vm_list_head);
+ if (connect_hypervisor(path) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to initialize channel manager\n");
+ return -1;
+ }
+
+ global_maplen = VIR_CPU_MAPLEN(CHANNEL_CMDS_MAX_CPUS);
+
+ global_vircpuinfo = rte_zmalloc(NULL, sizeof(*global_vircpuinfo) *
+ CHANNEL_CMDS_MAX_CPUS, CACHE_LINE_SIZE);
+ if (global_vircpuinfo == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for CPU Info\n");
+ goto error;
+ }
+ global_cpumaps = rte_zmalloc(NULL, CHANNEL_CMDS_MAX_CPUS * global_maplen,
+ CACHE_LINE_SIZE);
+ if (global_cpumaps == NULL) {
+ goto error;
+ }
+
+ n_cpus = virNodeGetCPUMap(global_vir_conn_ptr, NULL, NULL, 0);
+ if (n_cpus <= 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to get the number of Host "
+ "CPUs\n");
+ goto error;
+ }
+ global_n_host_cpus = (unsigned)n_cpus;
+
+ if (global_n_host_cpus > CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "The number of host CPUs(%u) exceeds the "
+ "maximum of %u\n", global_n_host_cpus, CHANNEL_CMDS_MAX_CPUS);
+ goto error;
+
+ }
+
+ return 0;
+error:
+ disconnect_hypervisor();
+ return -1;
+}
+
+void
+channel_manager_exit(void)
+{
+ unsigned i;
+ uint64_t mask;
+ struct virtual_machine_info *vm_info;
+
+ LIST_FOREACH(vm_info, &vm_list_head, vms_info) {
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ remove_channel_from_monitor(vm_info->channels[i]);
+ close(vm_info->channels[i]->fd);
+ rte_free(vm_info->channels[i]);
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ LIST_REMOVE(vm_info, vms_info);
+ rte_free(vm_info);
+ }
+
+ if (global_cpumaps != NULL)
+ rte_free(global_cpumaps);
+ if (global_vircpuinfo != NULL)
+ rte_free(global_vircpuinfo);
+ disconnect_hypervisor();
+}
diff --git a/examples/vm_power_manager/channel_manager.h b/examples/vm_power_manager/channel_manager.h
new file mode 100644
index 0000000..12c29c3
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.h
@@ -0,0 +1,314 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MANAGER_H_
+#define CHANNEL_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <linux/limits.h>
+#include <rte_atomic.h>
+#include "channel_commands.h"
+
+/* Maximum name length including '\0' terminator */
+#define CHANNEL_MGR_MAX_NAME_LEN 64
+
+/* Maximum number of channels to each Virtual Machine */
+#define CHANNEL_MGR_MAX_CHANNELS 64
+
+/* Hypervisor Path for libvirt(qemu/KVM) */
+#define CHANNEL_MGR_DEFAULT_HV_PATH "qemu:///system"
+
+/* File socket directory */
+#define CHANNEL_MGR_SOCKET_PATH "/tmp/powermonitor/"
+
+/* Communication Channel Status */
+enum channel_status { CHANNEL_MGR_CHANNEL_DISCONNECTED = 0,
+ CHANNEL_MGR_CHANNEL_CONNECTED,
+ CHANNEL_MGR_CHANNEL_DISABLED,
+ CHANNEL_MGR_CHANNEL_PROCESSING};
+
+/* VM libvirt(qemu/KVM) connection status */
+enum vm_status { CHANNEL_MGR_VM_INACTIVE = 0, CHANNEL_MGR_VM_ACTIVE};
+
+/*
+ * Represents a single and exclusive VM channel that exists between a guest and
+ * the host.
+ */
+struct channel_info {
+ char channel_path[PATH_MAX]; /**< Path to host socket */
+ volatile uint32_t status; /**< Connection status(enum channel_status) */
+ int fd; /**< AF_UNIX socket fd */
+ unsigned channel_num; /**< CHANNEL_MGR_SOCKET_PATH/<vm_name>.channel_num */
+ void *priv_info; /**< Pointer to private info, do not modify */
+};
+
+/* Represents a single VM instance used to return internal information about
+ * a VM */
+struct vm_info {
+ char name[CHANNEL_MGR_MAX_NAME_LEN]; /**< VM name */
+ enum vm_status status; /**< libvirt status */
+ uint64_t pcpu_mask[CHANNEL_CMDS_MAX_CPUS]; /**< pCPU mask for each vCPU */
+ unsigned num_vcpus; /**< number of vCPUS */
+ struct channel_info channels[CHANNEL_MGR_MAX_CHANNELS]; /**< Array of channel_info */
+ unsigned num_channels; /**< Number of channels */
+};
+
+/**
+ * Initialize the Channel Manager resources and connect to the Hypervisor
+ * specified in path.
+ * This must be successfully called first before calling any other functions.
+ * It must only be call once;
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_manager_init(const char *path);
+
+/**
+ * Free resources associated with the Channel Manager.
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * None
+ */
+void channel_manager_exit(void);
+
+/**
+ * Get the Physical CPU mask for VM lcore channel(vcpu), result is assigned to
+ * core_mask.
+ * It is not thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info
+ *
+ * @param vcpu
+ * The virtual CPU to query.
+ *
+ *
+ * @return
+ * - 0 on error.
+ * - >0 on success.
+ */
+uint64_t get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu);
+
+/**
+ * Set the Physical CPU mask for the specified vCPU.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup
+ *
+ * @param vcpu
+ * The virtual CPU to set.
+ *
+ * @param core_mask
+ * The core mask of the physical CPU(s) to bind the vCPU
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int set_pcpus_mask(char *vm_name, unsigned vcpu, uint64_t core_mask);
+
+/**
+ * Set the Physical CPU for the specified vCPU.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup
+ *
+ * @param vcpu
+ * The virtual CPU to set.
+ *
+ * @param core_num
+ * The core number of the physical CPU(s) to bind the vCPU
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int set_pcpu(char *vm_name, unsigned vcpu, unsigned core_num);
+/**
+ * Add a VM as specified by name to the Channel Manager. The name must
+ * correspond to a valid libvirt domain name.
+ * This is required prior to adding channels.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_vm(const char *name);
+
+/**
+ * Remove a previously added Virtual Machine from the Channel Manager
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_vm(const char *name);
+
+/**
+ * Add all available channels to the VM as specified by name.
+ * Channels in the form of paths
+ * (CHANNEL_MGR_SOCKET_PATH/<vm_name>.<channel_number>) will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - N the number of channels added for the VM
+ */
+int add_all_channels(const char *vm_name);
+
+/**
+ * Add the channel numbers in channel_list to the domain specified by name.
+ * Channels in the form of paths
+ * (CHANNEL_MGR_SOCKET_PATH/<vm_name>.<channel_number>) will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel number to add
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned num_channels);
+
+/**
+ * Remove a channel definition from the channel manager. This must only be
+ * called from the channel monitor thread.
+ *
+ * @param chan_info
+ * Pointer to a valid struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel(struct channel_info **chan_info_dptr);
+
+/**
+ * For all channels associated with a Virtual Machine name, update the
+ * connection status. Valid states are CHANNEL_MGR_CHANNEL_CONNECTED or
+ * CHANNEL_MGR_CHANNEL_DISABLED only.
+ *
+ *
+ * @param name
+ * Virtual Machine name to modify all channels.
+ *
+ * @param status
+ * The status to set each channel
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int set_channel_status_all(const char *name, enum channel_status status);
+
+/**
+ * For all channels in channel_list associated with a Virtual Machine name
+ * update the connection status of each.
+ * Valid states are CHANNEL_MGR_CHANNEL_CONNECTED or
+ * CHANNEL_MGR_CHANNEL_DISABLED only.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel numbers to
+ * modify.
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels modified for the VM
+ * - 0 for error
+ */
+int set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status);
+
+/**
+ * Populates a pointer to struct vm_info associated with vm_name.
+ *
+ * @param vm_name
+ * The name of the virtual machine to lookup.
+ *
+ * @param vm_info
+ * Pointer to a struct vm_info, this must be allocated prior to calling this
+ * function.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int get_info_vm(const char *vm_name, struct vm_info *info);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_MANAGER_H_ */
diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
new file mode 100644
index 0000000..5dc3e41
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -0,0 +1,228 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <signal.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/epoll.h>
+#include <sys/queue.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_atomic.h>
+
+
+#include "channel_monitor.h"
+#include "channel_commands.h"
+#include "channel_manager.h"
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_CHANNEL_MONITOR RTE_LOGTYPE_USER1
+
+#define MAX_EVENTS 256
+
+
+static volatile unsigned run_loop = 1;
+static int global_event_fd;
+static struct epoll_event *global_events_list;
+
+void channel_monitor_exit(void)
+{
+ run_loop = 0;
+ rte_free(global_events_list);
+}
+
+static int
+process_request(struct channel_packet *pkt, struct channel_info *chan_info)
+{
+ uint64_t core_mask;
+
+ if (chan_info == NULL)
+ return -1;
+
+ if (rte_atomic32_cmpset(&(chan_info->status), CHANNEL_MGR_CHANNEL_CONNECTED,
+ CHANNEL_MGR_CHANNEL_PROCESSING) == 0)
+ return -1;
+
+ if (pkt->command == CPU_POWER) {
+ core_mask = get_pcpus_mask(chan_info, pkt->resource_id);
+ if (core_mask == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error get physical CPU mask for "
+ "channel '%s' using vCPU(%u)\n", chan_info->channel_path,
+ (unsigned)pkt->unit);
+ return -1;
+ }
+ if (__builtin_popcountll(core_mask) == 1) {
+
+ unsigned core_num = __builtin_ffsll(core_mask) - 1;
+
+ switch (pkt->unit) {
+ case(CPU_POWER_SCALE_MIN):
+ power_manager_scale_core_min(core_num);
+ break;
+ case(CPU_POWER_SCALE_MAX):
+ power_manager_scale_core_max(core_num);
+ break;
+ case(CPU_POWER_SCALE_DOWN):
+ power_manager_scale_core_down(core_num);
+ break;
+ case(CPU_POWER_SCALE_UP):
+ power_manager_scale_core_up(core_num);
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (pkt->unit) {
+ case(CPU_POWER_SCALE_MIN):
+ power_manager_scale_mask_min(core_mask);
+ break;
+ case(CPU_POWER_SCALE_MAX):
+ power_manager_scale_mask_max(core_mask);
+ break;
+ case(CPU_POWER_SCALE_DOWN):
+ power_manager_scale_mask_down(core_mask);
+ break;
+ case(CPU_POWER_SCALE_UP):
+ power_manager_scale_mask_up(core_mask);
+ break;
+ default:
+ break;
+ }
+
+ }
+ }
+ /* Return is not checked as channel status may have been set to DISABLED
+ * from management thread
+ */
+ rte_atomic32_cmpset(&(chan_info->status), CHANNEL_MGR_CHANNEL_PROCESSING,
+ CHANNEL_MGR_CHANNEL_CONNECTED);
+ return 0;
+
+}
+
+int
+add_channel_to_monitor(struct channel_info **chan_info)
+{
+ struct channel_info *info = *chan_info;
+ struct epoll_event event;
+ event.events = EPOLLIN;
+ event.data.ptr = info;
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_ADD, info->fd, &event) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to add channel '%s' "
+ "to epoll\n", info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+remove_channel_from_monitor(struct channel_info *chan_info)
+{
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_DEL, chan_info->fd, NULL) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to remove channel '%s' "
+ "from epoll\n", chan_info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+channel_monitor_init(void)
+{
+ global_event_fd = epoll_create1(0);
+ if (global_event_fd == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error creating epoll context with "
+ "error %s\n", strerror(errno));
+ return -1;
+ }
+ global_events_list = rte_malloc("epoll_events", sizeof(*global_events_list)
+ * MAX_EVENTS, CACHE_LINE_SIZE);
+ if (global_events_list == NULL) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to rte_malloc for"
+ "epoll events\n");
+ return -1;
+ }
+ return 0;
+}
+
+void
+run_channel_monitor(void)
+{
+ while (run_loop) {
+ int n_events, i;
+ n_events = epoll_wait(global_event_fd, global_events_list,
+ MAX_EVENTS, 1);
+ if (!run_loop)
+ break;
+ for (i = 0; i < n_events; i++) {
+ struct channel_info *chan_info = (struct channel_info *)
+ global_events_list[i].data.ptr;
+ if ((global_events_list[i].events & EPOLLERR) ||
+ (global_events_list[i].events & EPOLLHUP)) {
+ remove_channel(&chan_info);
+ }
+ if (global_events_list[i].events & EPOLLIN) {
+
+ int n_bytes, err = 0;
+ struct channel_packet pkt;
+ void *buffer = &pkt;
+ int buffer_len = sizeof(pkt);
+ while (buffer_len > 0) {
+ n_bytes = read(chan_info->fd, buffer, buffer_len);
+ if (n_bytes == buffer_len)
+ break;
+ if (n_bytes == -1) {
+ err = errno;
+ RTE_LOG(DEBUG, CHANNEL_MONITOR, "Received error on "
+ "channel '%s' read: %s\n",
+ chan_info->channel_path, strerror(err));
+ remove_channel(&chan_info);
+ break;
+ }
+ buffer = (char *)buffer + n_bytes;
+ buffer_len -= n_bytes;
+ }
+ if (!err)
+ process_request(&pkt, chan_info);
+ }
+ }
+ }
+}
diff --git a/examples/vm_power_manager/channel_monitor.h b/examples/vm_power_manager/channel_monitor.h
new file mode 100644
index 0000000..c138607
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.h
@@ -0,0 +1,102 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MONITOR_H_
+#define CHANNEL_MONITOR_H_
+
+#include "channel_manager.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Setup the Channel Monitor resources required to initialize epoll.
+ * Must be called first before calling other functions.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_monitor_init(void);
+
+/**
+ * Run the channel monitor, loops forever on on epoll_wait.
+ *
+ *
+ * @return
+ * None
+ */
+void run_channel_monitor(void);
+
+/**
+ * Exit the Channel Monitor, exiting the epoll_wait loop and events processing.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+void channel_monitor_exit(void);
+
+/**
+ * Add an open channel to monitor via epoll. A pointer to struct channel_info
+ * will be registered with epoll for event processing.
+ * It is thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info pointer.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_channel_to_monitor(struct channel_info **chan_info);
+
+/**
+ * Remove a previously added channel from epoll control.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel_from_monitor(struct channel_info *chan_info);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* CHANNEL_MONITOR_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 02/10] VM Power Management CLI(Host).
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 03/10] CPU Frequency Power Management(Host) Alan Carew
` (10 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
The CLI is used for administrating the channel monitor and manager and
manually setting the CPU frequency on the host.
Supports the following commands:
add_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
rm_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
add_channels [Fixed STRING]: add_channels <vm_name> <list>|all, add
communication channels for the specified VM, the virtio channels must be
enabled in the VM configuration(qemu/libvirt) and the associated VM must be
active. <list> is a comma-separated list of channel numbers to add, using the
keyword 'all' will attempt to add all channels for the VM
set_channel_status [Fixed STRING]:
set_channel_status <vm_name> <list>|all enabled|disabled, enable or disable
the communication channels in list(comma-seperated) for the specified VM,
alternatively list can be replaced with keyword 'all'. Disabled channels will
still receive packets on the host, however the commands they specify will be
ignored. Set status to 'enabled' to begin processing requests again.
show_vm [Fixed STRING]: show_vm <vm_name>, prints the information on the
specified VM(s), the information lists the number of vCPUS, the pinning to
pCPU(s) as a bit mask, along with any communication channels associated with
each VM
show_cpu_freq_mask [Fixed STRING]: show_cpu_freq_mask <mask>, Get the current
frequency for each core specified in the mask
set_cpu_freq_mask [Fixed STRING]: set_cpu_freq <core_mask> <up|down|min|max>,
Set the current frequency for the cores specified in <core_mask> by scaling
each up/down/min/max.
show_cpu_freq [Fixed STRING]: Get the current frequency for the specified core
set_cpu_freq [Fixed STRING]: set_cpu_freq <core_num> <up|down|min|max>,
Set the current frequency for the specified core by scaling up/down/min/max
quit [Fixed STRING]: close the application
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/vm_power_cli.c | 669 +++++++++++++++++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 +++
2 files changed, 716 insertions(+)
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
diff --git a/examples/vm_power_manager/vm_power_cli.c b/examples/vm_power_manager/vm_power_cli.c
new file mode 100644
index 0000000..a8cfb3a
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.c
@@ -0,0 +1,669 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdio.h>
+#include <string.h>
+#include <termios.h>
+#include <errno.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+
+#include "vm_power_cli.h"
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "channel_commands.h"
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+struct cmd_show_vm_result {
+ cmdline_fixed_string_t show_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_show_vm_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_vm_result *res = parsed_result;
+ struct vm_info info;
+ unsigned i;
+
+ if (get_info_vm(res->vm_name, &info) != 0)
+ return;
+ cmdline_printf(cl, "VM: '%s', status = ", info.name);
+ if (info.status == CHANNEL_MGR_VM_ACTIVE)
+ cmdline_printf(cl, "ACTIVE\n");
+ else
+ cmdline_printf(cl, "INACTIVE\n");
+ cmdline_printf(cl, "Channels %u\n", info.num_channels);
+ for (i = 0; i < info.num_channels; i++) {
+ cmdline_printf(cl, " [%u]: %s, status = ", i,
+ info.channels[i].channel_path);
+ switch (info.channels[i].status) {
+ case CHANNEL_MGR_CHANNEL_CONNECTED:
+ cmdline_printf(cl, "CONNECTED\n");
+ break;
+ case CHANNEL_MGR_CHANNEL_DISCONNECTED:
+ cmdline_printf(cl, "DISCONNECTED\n");
+ break;
+ case CHANNEL_MGR_CHANNEL_DISABLED:
+ cmdline_printf(cl, "DISABLED\n");
+ break;
+ case CHANNEL_MGR_CHANNEL_PROCESSING:
+ cmdline_printf(cl, "PROCESSING\n");
+ break;
+ default:
+ cmdline_printf(cl, "UNKNOWN\n");
+ break;
+ }
+ }
+ cmdline_printf(cl, "Virtual CPU(s): %u\n", info.num_vcpus);
+ for (i = 0; i < info.num_vcpus; i++) {
+ cmdline_printf(cl, " [%u]: Physical CPU Mask 0x%"PRIx64"\n", i,
+ info.pcpu_mask[i]);
+ }
+}
+
+
+
+cmdline_parse_token_string_t cmd_vm_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ show_vm, "show_vm");
+cmdline_parse_token_string_t cmd_show_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_show_vm_set = {
+ .f = cmd_show_vm_parsed,
+ .data = NULL,
+ .help_str = "show_vm <vm_name>, prints the information on the "
+ "specified VM(s), the information lists the number of vCPUS, the "
+ "pinning to pCPU(s) as a bit mask, along with any communication "
+ "channels associated with each VM",
+ .tokens = {
+ (void *)&cmd_vm_show,
+ (void *)&cmd_show_vm_name,
+ NULL,
+ },
+};
+
+/* *** vCPU to pCPU mapping operations *** */
+struct cmd_set_pcpu_mask_result {
+ cmdline_fixed_string_t set_pcpu_mask;
+ cmdline_fixed_string_t vm_name;
+ uint8_t vcpu;
+ uint64_t core_mask;
+};
+
+static void
+cmd_set_pcpu_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_pcpu_mask_result *res = parsed_result;
+ if (set_pcpus_mask(res->vm_name, res->vcpu, res->core_mask) == 0)
+ cmdline_printf(cl, "Pinned vCPU(%"PRId8") to pCPU core "
+ "mask(0x%"PRIx64")\n", res->vcpu, res->core_mask);
+ else
+ cmdline_printf(cl, "Unable to pin vCPU(%"PRId8") to pCPU core "
+ "mask(0x%"PRIx64")\n", res->vcpu, res->core_mask);
+}
+
+cmdline_parse_token_string_t cmd_set_pcpu_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ set_pcpu_mask, "set_pcpu_mask");
+cmdline_parse_token_string_t cmd_set_pcpu_mask_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ vm_name, NULL);
+cmdline_parse_token_num_t set_pcpu_mask_vcpu =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ vcpu, UINT8);
+cmdline_parse_token_num_t set_pcpu_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ core_mask, UINT64);
+
+
+cmdline_parse_inst_t cmd_set_pcpu_mask_set = {
+ .f = cmd_set_pcpu_mask_parsed,
+ .data = NULL,
+ .help_str = "set_pcpu_mask <vm_name> <vcpu> <pcpu>, Set the binding "
+ "of Virtual CPU on VM to the Physical CPU mask.",
+ .tokens = {
+ (void *)&cmd_set_pcpu_mask,
+ (void *)&cmd_set_pcpu_mask_vm_name,
+ (void *)&set_pcpu_mask_vcpu,
+ (void *)&set_pcpu_mask_core_mask,
+ NULL,
+ },
+};
+
+struct cmd_set_pcpu_result {
+ cmdline_fixed_string_t set_pcpu;
+ cmdline_fixed_string_t vm_name;
+ uint8_t vcpu;
+ uint8_t core;
+};
+
+static void
+cmd_set_pcpu_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_pcpu_result *res = parsed_result;
+ if (set_pcpu(res->vm_name, res->vcpu, res->core) == 0)
+ cmdline_printf(cl, "Pinned vCPU(%"PRId8") to pCPU core "
+ "%"PRId8")\n", res->vcpu, res->core);
+ else
+ cmdline_printf(cl, "Unable to pin vCPU(%"PRId8") to pCPU core "
+ "%"PRId8")\n", res->vcpu, res->core);
+}
+
+cmdline_parse_token_string_t cmd_set_pcpu =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_result,
+ set_pcpu, "set_pcpu");
+cmdline_parse_token_string_t cmd_set_pcpu_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_result,
+ vm_name, NULL);
+cmdline_parse_token_num_t set_pcpu_vcpu =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_result,
+ vcpu, UINT8);
+cmdline_parse_token_num_t set_pcpu_core =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_result,
+ core, UINT64);
+
+
+cmdline_parse_inst_t cmd_set_pcpu_set = {
+ .f = cmd_set_pcpu_parsed,
+ .data = NULL,
+ .help_str = "set_pcpu <vm_name> <vcpu> <pcpu>, Set the binding "
+ "of Virtual CPU on VM to the Physical CPU.",
+ .tokens = {
+ (void *)&cmd_set_pcpu,
+ (void *)&cmd_set_pcpu_vm_name,
+ (void *)&set_pcpu_vcpu,
+ (void *)&set_pcpu_core,
+ NULL,
+ },
+};
+
+struct cmd_vm_op_result {
+ cmdline_fixed_string_t op_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_vm_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vm_op_result *res = parsed_result;
+
+ if (!strcmp(res->op_vm, "add_vm")) {
+ if (add_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to add VM '%s'\n", res->vm_name);
+ } else if (remove_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to remove VM '%s'\n", res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_vm_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ op_vm, "add_vm#rm_vm");
+cmdline_parse_token_string_t cmd_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_vm_op_set = {
+ .f = cmd_vm_op_parsed,
+ .data = NULL,
+ .help_str = "add_vm|rm_vm <name>, add a VM for "
+ "subsequent operations with the CLI or remove a previously added "
+ "VM from the VM Power Manager",
+ .tokens = {
+ (void *)&cmd_vm_op,
+ (void *)&cmd_vm_name,
+ NULL,
+ },
+};
+
+/* *** VM channel operations *** */
+struct cmd_channels_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+};
+static void
+cmd_channels_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num, i;
+ int channels_added;
+ unsigned channel_list[CHANNEL_CMDS_MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_op_result *res = parsed_result;
+
+ if (!strcmp(res->channel_list, "all")) {
+ channels_added = add_all_channels(res->vm_name);
+ cmdline_printf(cl, "Added %d channels for VM '%s'\n",
+ channels_added, res->vm_name);
+ return;
+ }
+
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "Channel number '%u' exceeds the maximum number "
+ "of allowable channels(%u) for VM '%s'\n", channel_num,
+ CHANNEL_CMDS_MAX_VM_CHANNELS, res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ for (i = 0; i < num_channels; i++)
+ cmdline_printf(cl, "[%u]: Adding channel %u\n", i, channel_list[i]);
+
+ channels_added = add_channels(res->vm_name, channel_list,
+ num_channels);
+ cmdline_printf(cl, "Enabled %d channels for '%s'\n", channels_added,
+ res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ op, "add_channels");
+cmdline_parse_token_string_t cmd_channels_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ channel_list, NULL);
+
+cmdline_parse_inst_t cmd_channels_op_set = {
+ .f = cmd_channels_op_parsed,
+ .data = NULL,
+ .help_str = "add_channels <vm_name> <list>|all, add "
+ "communication channels for the specified VM, the "
+ "virtio channels must be enabled in the VM "
+ "configuration(qemu/libvirt) and the associated VM must be active. "
+ "<list> is a comma-seperated list of channel numbers to add, using "
+ "the keyword 'all' will attempt to add all channels for the VM",
+ .tokens = {
+ (void *)&cmd_channels_op,
+ (void *)&cmd_channels_vm_name,
+ (void *)&cmd_channels_list,
+ NULL,
+ },
+};
+
+struct cmd_channels_status_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+ cmdline_fixed_string_t status;
+};
+
+static void
+cmd_channels_status_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num;
+ int changed;
+ unsigned channel_list[CHANNEL_CMDS_MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_status_op_result *res = parsed_result;
+ enum channel_status status;
+
+ if (!strcmp(res->status, "enabled"))
+ status = CHANNEL_MGR_CHANNEL_CONNECTED;
+ else
+ status = CHANNEL_MGR_CHANNEL_DISABLED;
+
+ if (!strcmp(res->channel_list, "all")) {
+ changed = set_channel_status_all(res->vm_name, status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+ return;
+ }
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "%u exceeds the maximum number of allowable "
+ "channels(%u) for VM '%s'\n", channel_num,
+ CHANNEL_CMDS_MAX_VM_CHANNELS, res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ changed = set_channel_status(res->vm_name, channel_list, num_channels,
+ status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_status_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ op, "set_channel_status");
+cmdline_parse_token_string_t cmd_channels_status_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_status_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ channel_list, NULL);
+cmdline_parse_token_string_t cmd_channels_status =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ status, "enabled#disabled");
+
+cmdline_parse_inst_t cmd_channels_status_op_set = {
+ .f = cmd_channels_status_op_parsed,
+ .data = NULL,
+ .help_str = "set_channel_status <vm_name> <list>|all enabled|disabled, "
+ " enable or disable the communication channels in "
+ "list(comma-seperated) for the specified VM, alternatively list can"
+ " be replaced with keyword 'all'. Disabled channels will still "
+ "receive packets on the host, however the commands they specify "
+ "will be ignored. Set status to 'enabled' to begin processing "
+ "requests again.",
+ .tokens = {
+ (void *)&cmd_channels_status_op,
+ (void *)&cmd_channels_status_vm_name,
+ (void *)&cmd_channels_status_list,
+ (void *)&cmd_channels_status,
+ NULL,
+ },
+};
+
+/* *** CPU Frequency operations *** */
+struct cmd_show_cpu_freq_mask_result {
+ cmdline_fixed_string_t show_cpu_freq_mask;
+ uint64_t core_mask;
+};
+
+static void
+cmd_show_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_mask_result *res = parsed_result;
+ unsigned i;
+ uint64_t mask = res->core_mask;
+ uint32_t freq;
+ for (i = 0; mask; mask &= ~(1ULL << i++)) {
+ if ((mask >> i) & 1) {
+ freq = power_manager_get_current_frequency(i);
+ if (freq > 0)
+ cmdline_printf(cl, "Core %u: %"PRId32"\n", i, freq);
+ }
+ }
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ show_cpu_freq_mask, "show_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_show_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ core_mask, UINT64);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_mask_set = {
+ .f = cmd_show_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "show_cpu_freq_mask <mask>, Get the current frequency for each "
+ "core specified in the mask",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq_mask,
+ (void *)&cmd_show_cpu_freq_mask_core_mask,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_mask_result {
+ cmdline_fixed_string_t set_cpu_freq_mask;
+ uint64_t core_mask;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_cpu_freq_mask_result *res = parsed_result;
+ int ret = -1;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_mask_up(res->core_mask);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_mask_down(res->core_mask);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_mask_min(res->core_mask);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_mask_max(res->core_mask);
+ if (ret < 0) {
+ cmdline_printf(cl, "Error scaling core_mask(0x%"PRIx64") '%s' , not "
+ "all cores specified have been scaled\n",
+ res->core_mask, res->cmd);
+ };
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ set_cpu_freq_mask, "set_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_set_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ core_mask, UINT64);
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask_result =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_mask_set = {
+ .f = cmd_set_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_mask> <up|down|min|max>, Set the current "
+ "frequency for the cores specified in <core_mask> by scaling "
+ "each up/down/min/max.",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq_mask,
+ (void *)&cmd_set_cpu_freq_mask_core_mask,
+ (void *)&cmd_set_cpu_freq_mask_result,
+ NULL,
+ },
+};
+
+
+
+struct cmd_show_cpu_freq_result {
+ cmdline_fixed_string_t show_cpu_freq;
+ uint8_t core_num;
+};
+
+static void
+cmd_show_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_result *res = parsed_result;
+ uint32_t curr_freq = power_manager_get_current_frequency(res->core_num);
+ if (curr_freq == 0) {
+ cmdline_printf(cl, "Unable to get frequency for core %u\n",
+ res->core_num);
+ return;
+ }
+ cmdline_printf(cl, "Core %u frequency: %"PRId32"\n", res->core_num,
+ curr_freq);
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_result,
+ show_cpu_freq, "show_cpu_freq");
+
+cmdline_parse_token_num_t cmd_show_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_result,
+ core_num, UINT8);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_set = {
+ .f = cmd_show_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "Get the current frequency for the specified core",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq,
+ (void *)&cmd_show_cpu_freq_core_num,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t core_num;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_core_up(res->core_num);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_core_down(res->core_num);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_core_min(res->core_num);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_core_max(res->core_num);
+ if (ret < 0) {
+ cmdline_printf(cl, "Error scaling core(%u) '%s'\n", res->core_num,
+ res->cmd);
+ }
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ core_num, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_vm_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_status_op_set,
+ (cmdline_parse_inst_t *)&cmd_show_vm_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ (cmdline_parse_inst_t *)&cmd_set_pcpu_mask_set,
+ (cmdline_parse_inst_t *)&cmd_set_pcpu_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+ power_manager_init();
+ cl = cmdline_stdin_new(main_ctx, "vmpower> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/vm_power_cli.h b/examples/vm_power_manager/vm_power_cli.h
new file mode 100644
index 0000000..deccd51
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.h
@@ -0,0 +1,47 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 03/10] CPU Frequency Power Management(Host).
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 02/10] VM Power Management CLI(Host) Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 04/10] VM Power Management application and Makefile Alan Carew
` (9 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
A wrapper around librte_power(using ACPI cpufreq), providing locking around the
non-threadsafe library, allowing for frequency changes based on core masks and
core numbers from both the CLI thread and epoll monitor thread.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/power_manager.c | 244 ++++++++++++++++++++++++++++++
examples/vm_power_manager/power_manager.h | 188 +++++++++++++++++++++++
2 files changed, 432 insertions(+)
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
diff --git a/examples/vm_power_manager/power_manager.c b/examples/vm_power_manager/power_manager.c
new file mode 100644
index 0000000..b7b1fca
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.c
@@ -0,0 +1,244 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/types.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_power.h>
+#include <rte_spinlock.h>
+
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_POWER_MANAGER RTE_LOGTYPE_USER1
+
+#define POWER_SCALE_CORE(DIRECTION, core_num , ret) do { \
+ if (core_num >= POWER_MGR_MAX_CPUS) \
+ return -1; \
+ if (!(global_enabled_cpus & (1ULL << core_num))) \
+ return -1; \
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl); \
+ ret = rte_power_freq_##DIRECTION(core_num); \
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl); \
+} while (0)
+
+#define POWER_SCALE_MASK(DIRECTION, core_mask, ret) do { \
+ int i; \
+ for (i = 0; core_mask; core_mask &= ~(1 << i++)) { \
+ if ((core_mask >> i) & 1) { \
+ if (!(global_enabled_cpus & (1ULL << i))) \
+ continue; \
+ rte_spinlock_lock(&global_core_freq_info[i].power_sl); \
+ if (rte_power_freq_##DIRECTION(i) != 1) \
+ ret = -1; \
+ rte_spinlock_unlock(&global_core_freq_info[i].power_sl); \
+ } \
+ } \
+} while (0)
+
+struct freq_info {
+ rte_spinlock_t power_sl;
+ uint32_t freqs[RTE_MAX_LCORE_FREQS];
+ unsigned num_freqs;
+} __rte_cache_aligned;
+
+static struct freq_info global_core_freq_info[POWER_MGR_MAX_CPUS];
+
+static uint64_t global_enabled_cpus;
+
+#define SYSFS_CPU_PATH "/sys/devices/system/cpu/cpu%u/topology/core_id"
+
+static unsigned
+set_host_cpus_mask(void)
+{
+ char path[PATH_MAX];
+ unsigned i;
+ unsigned num_cpus = 0;
+ for (i = 0; i < POWER_MGR_MAX_CPUS; i++) {
+ snprintf(path, sizeof(path), SYSFS_CPU_PATH, i);
+ if (access(path, F_OK) == 0) {
+ global_enabled_cpus |= 1ULL << i;
+ num_cpus++;
+ } else
+ return num_cpus;
+ }
+ return num_cpus;
+}
+
+int
+power_manager_init(void)
+{
+ unsigned i, num_cpus;
+ uint64_t cpu_mask;
+ int ret = 0;
+
+ num_cpus = set_host_cpus_mask();
+ if (num_cpus == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to detected host CPUs, please "
+ "ensure that sufficient privileges exist to inspect sysfs\n");
+ return -1;
+ }
+ rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ cpu_mask = global_enabled_cpus;
+ for (i = 0; cpu_mask; cpu_mask &= ~(1 << i++)) {
+ if (rte_power_init(i) < 0 || rte_power_freqs(i,
+ global_core_freq_info[i].freqs,
+ RTE_MAX_LCORE_FREQS) == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to initialize power manager "
+ "for core %u\n", i);
+ global_enabled_cpus &= ~(1 << i);
+ num_cpus--;
+ ret = -1;
+ }
+ rte_spinlock_init(&global_core_freq_info[i].power_sl);
+ }
+ RTE_LOG(INFO, POWER_MANAGER, "Detected %u host CPUs , enabled core mask:"
+ " 0x%"PRIx64"\n", num_cpus, global_enabled_cpus);
+ return ret;
+
+}
+
+uint32_t
+power_manager_get_current_frequency(unsigned core_num)
+{
+ uint32_t freq, index;
+
+ if (core_num >= POWER_MGR_MAX_CPUS) {
+ RTE_LOG(ERR, POWER_MANAGER, "Core(%u) is out of range 0...%d\n",
+ core_num, POWER_MGR_MAX_CPUS-1);
+ return -1;
+ }
+ if (!(global_enabled_cpus & (1ULL << core_num)))
+ return 0;
+
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl);
+ index = rte_power_get_freq(core_num);
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl);
+ if (index >= POWER_MGR_MAX_CPUS)
+ freq = 0;
+ else
+ freq = global_core_freq_info[core_num].freqs[index];
+
+ return freq;
+}
+
+int
+power_manager_exit(void)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for (i = 0; global_enabled_cpus; global_enabled_cpus &= ~(1 << i++)) {
+ if (rte_power_exit(i) < 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to shutdown power manager "
+ "for core %u\n", i);
+ ret = -1;
+ }
+ }
+ global_enabled_cpus = 0;
+ return ret;
+}
+
+int
+power_manager_scale_mask_up(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(up, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_down(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(down, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_min(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(min, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_max(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(max, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_up(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(up, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_down(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(down, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_min(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(min, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_max(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(max, core_num, ret);
+ return ret;
+}
diff --git a/examples/vm_power_manager/power_manager.h b/examples/vm_power_manager/power_manager.h
new file mode 100644
index 0000000..1b45bab
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.h
@@ -0,0 +1,188 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef POWER_MANAGER_H_
+#define POWER_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Maximum number of CPUS to manage */
+#define POWER_MGR_MAX_CPUS 64
+/**
+ * Initialize power management.
+ * Initializes resources and verifies the number of CPUs on the system.
+ * Wraps librte_power int rte_power_init(unsigned lcore_id);
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_init(void);
+
+/**
+ * Exit power management. Must be called prior to exiting the application.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_exit(void);
+
+/**
+ * Scale up the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_up(uint64_t core_mask);
+
+/**
+ * Scale down the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_down(uint64_t core_mask);
+
+/**
+ * Scale to the minimum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_min(uint64_t core_mask);
+
+/**
+ * Scale to the maximum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_max(uint64_t core_mask);
+
+/**
+ * Scale up frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_core_up(unsigned core_num);
+
+/**
+ * Scale down frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_down(unsigned core_num);
+
+/**
+ * Scale to minimum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_min(unsigned core_num);
+
+/**
+ * Scale to maximum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_max(unsigned core_num);
+
+/**
+ * Get the current freuency of the core specified by core_num
+ *
+ * @param core_num
+ * The core number to get the current frequency
+ *
+ * @return
+ * - 0 on error
+ * - >0 for current frequency.
+ */
+uint32_t power_manager_get_current_frequency(unsigned core_num);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* POWER_MANAGER_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 04/10] VM Power Management application and Makefile.
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (2 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 03/10] CPU Frequency Power Management(Host) Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 05/10] VM Power Management CLI(Guest) Alan Carew
` (8 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
For launching CLI thread and Monitor thread and initialising
resources.
Requires a minimum of two lcores to run, additional cores specified by eal core
mask are not used.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/Makefile | 57 +++++++++++++++++++
examples/vm_power_manager/main.c | 113 +++++++++++++++++++++++++++++++++++++
examples/vm_power_manager/main.h | 52 +++++++++++++++++
3 files changed, 222 insertions(+)
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
new file mode 100644
index 0000000..7d6f943
--- /dev/null
+++ b/examples/vm_power_manager/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli.c power_manager.c channel_manager.c
+SRCS-y += channel_monitor.c
+
+CFLAGS += -O3 -lvirt -I$(RTE_SDK)/lib/librte_power/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
new file mode 100644
index 0000000..e819e6f
--- /dev/null
+++ b/examples/vm_power_manager/main.c
@@ -0,0 +1,113 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_eal.h>
+#include <rte_launch.h>
+#include <rte_log.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "vm_power_cli.h"
+#include "main.h"
+
+static int
+run_monitor(__attribute__((unused)) void *arg)
+{
+ if (channel_manager_init(CHANNEL_MGR_DEFAULT_HV_PATH) < 0) {
+ printf("Unable to initialize channel manager\n");
+ return -1;
+ }
+ if (channel_monitor_init() < 0) {
+ printf("Unable to initialize channel monitor\n");
+ return -1;
+ }
+ run_channel_monitor();
+ return 0;
+}
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ lcore_id = rte_get_next_lcore(-1, 1, 0);
+ if (lcore_id == RTE_MAX_LCORE) {
+ RTE_LOG(ERR, EAL, "A minimum of two cores are required to run "
+ "application\n");
+ return 0;
+ }
+ rte_eal_remote_launch(run_monitor, NULL, lcore_id);
+
+ run_cli(NULL);
+
+ rte_eal_mp_wait_lcore();
+ return 0;
+}
diff --git a/examples/vm_power_manager/main.h b/examples/vm_power_manager/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 05/10] VM Power Management CLI(Guest).
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (3 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 04/10] VM Power Management application and Makefile Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
` (7 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
Provides a small sample application(guest_vm_power_mgr) to run on a VM.
The application is run by providing a core mask(-c) and number of memory
channels(-n). The core mask corresponds to the number of lcore channels to
attempt to open. A maximum of 64 channels per VM is allowed. The channels must
be monitored by the host.
After successful initialisation a CPU frequency command can be sent to the host
using:
set_cpu_freq <lcore_num> <up|down|min|max>.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/guest_cli/Makefile | 56 ++++++++
examples/vm_power_manager/guest_cli/main.c | 87 ++++++++++++
examples/vm_power_manager/guest_cli/main.h | 52 +++++++
.../guest_cli/vm_power_cli_guest.c | 155 +++++++++++++++++++++
.../guest_cli/vm_power_cli_guest.h | 55 ++++++++
5 files changed, 405 insertions(+)
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
new file mode 100644
index 0000000..167a7ed
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -0,0 +1,56 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = guest_vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli_guest.c
+
+CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/guest_cli/main.c b/examples/vm_power_manager/guest_cli/main.c
new file mode 100644
index 0000000..1e4767a
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.c
@@ -0,0 +1,87 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+*/
+#include <signal.h>
+
+#include <rte_lcore.h>
+#include <rte_power.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "vm_power_cli_guest.h"
+#include "main.h"
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ rte_power_set_env(PM_ENV_KVM_VM);
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_init(lcore_id);
+ }
+ run_cli(NULL);
+
+ return 0;
+}
diff --git a/examples/vm_power_manager/guest_cli/main.h b/examples/vm_power_manager/guest_cli/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
new file mode 100644
index 0000000..7c4af4a
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
@@ -0,0 +1,155 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+#include <termios.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_lcore.h>
+
+#include <rte_power.h>
+
+#include "vm_power_cli_guest.h"
+
+
+#define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t lcore_id;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = rte_power_freq_up(res->lcore_id);
+ else if (!strcmp(res->cmd , "down"))
+ ret = rte_power_freq_down(res->lcore_id);
+ else if (!strcmp(res->cmd , "min"))
+ ret = rte_power_freq_min(res->lcore_id);
+ else if (!strcmp(res->cmd , "max"))
+ ret = rte_power_freq_max(res->lcore_id);
+ if (ret != 1)
+ cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ lcore_id, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+ cl = cmdline_stdin_new(main_ctx, "vmpower(guest)> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
new file mode 100644
index 0000000..0c4bdd5
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
@@ -0,0 +1,55 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "channel_commands.h"
+
+int guest_channel_host_connect(unsigned lcore_id);
+
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 06/10] VM communication channels for VM Power Management(Guest).
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (4 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 05/10] VM Power Management CLI(Guest) Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 07/10] librte_power common interface for Guest and Host Alan Carew
` (6 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
Allows for the opening of Virtio-Serial devices on a VM, where a DPDK
application can send packets to the host based monitor. The packet formatted is
specified in channel_commands.h
Each device appears as a serial device in path
/dev/virtio-ports/virtio.serial.port.<agent_type>.<lcore_num> where each lcore
in a DPDK application has exclusive to a device/channel.
Each channel is opened in non-blocking mode, after a successful open a test
packet is send to the host to ensure the host side is monitoring.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/guest_channel.c | 162 +++++++++++++++++++++++++++++++++++++++
lib/librte_power/guest_channel.h | 89 +++++++++++++++++++++
2 files changed, 251 insertions(+)
create mode 100644 lib/librte_power/guest_channel.c
create mode 100644 lib/librte_power/guest_channel.h
diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
new file mode 100644
index 0000000..2295665
--- /dev/null
+++ b/lib/librte_power/guest_channel.c
@@ -0,0 +1,162 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+#include <fcntl.h>
+#include <string.h>
+#include <errno.h>
+
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+static int global_fds[RTE_MAX_LCORE];
+
+int
+guest_channel_host_connect(const char *path, unsigned lcore_id)
+{
+ int flags, ret;
+ struct channel_packet pkt;
+ char fd_path[PATH_MAX];
+ int fd = -1;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ /* check if path is already open */
+ if (global_fds[lcore_id] != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is already open with fd %d\n",
+ lcore_id, global_fds[lcore_id]);
+ return -1;
+ }
+
+ snprintf(fd_path, PATH_MAX, "%s.%u", path, lcore_id);
+ RTE_LOG(INFO, GUEST_CHANNEL, "Opening channel '%s' for lcore %u\n",
+ fd_path, lcore_id);
+ fd = open(fd_path, O_RDWR);
+ if (fd < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Unable to to connect to '%s' with error "
+ "%s\n", fd_path, strerror(errno));
+ return -1;
+ }
+
+ flags = fcntl(fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on fcntl get flags for file %s\n",
+ fd_path);
+ goto error;
+ }
+
+ flags |= O_NONBLOCK;
+ if (fcntl(fd, F_SETFL, flags) < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on setting non-blocking mode for "
+ "file %s", fd_path);
+ goto error;
+ }
+ /* QEMU needs a delay after connection */
+ sleep(1);
+
+ /* Send a test packet, this command is ignored by the host, but a successful
+ * send indicates that the host endpoint is monitoring.
+ */
+ pkt.command = CPU_POWER_CONNECT;
+ global_fds[lcore_id] = fd;
+ ret = guest_channel_send_msg(&pkt, lcore_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Error on channel '%s' communications "
+ "test: %s\n", fd_path, strerror(ret));
+ goto error;
+ }
+ RTE_LOG(INFO, GUEST_CHANNEL, "Channel '%s' is now connected\n", fd_path);
+ return 0;
+error:
+ close(fd);
+ global_fds[lcore_id] = 0;
+ return -1;
+}
+
+int
+guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id)
+{
+ int ret, buffer_len = sizeof(*pkt);
+ void *buffer = pkt;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+
+ if (global_fds[lcore_id] == 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
+ return -1;
+ }
+ while (buffer_len > 0) {
+ ret = write(global_fds[lcore_id], buffer, buffer_len);
+ if (ret == buffer_len)
+ return 0;
+ if (ret == -1) {
+ if (errno == EINTR)
+ continue;
+ return errno;
+ }
+ buffer = (char *)buffer + ret;
+ buffer_len -= ret;
+ }
+ return 0;
+}
+
+void
+guest_channel_host_disconnect(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return;
+ }
+ if (global_fds[lcore_id] == 0)
+ return;
+ close(global_fds[lcore_id]);
+ global_fds[lcore_id] = 0;
+}
diff --git a/lib/librte_power/guest_channel.h b/lib/librte_power/guest_channel.h
new file mode 100644
index 0000000..9e18af5
--- /dev/null
+++ b/lib/librte_power/guest_channel.h
@@ -0,0 +1,89 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _GUEST_CHANNEL_H
+#define _GUEST_CHANNEL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <channel_commands.h>
+
+/**
+ * Connect to the Virtio-Serial VM end-point located in path. It is
+ * thread safe for unique lcore_ids. This function must be only called once from
+ * each lcore.
+ *
+ * @param path
+ * The path to the serial device on the filesystem
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int guest_channel_host_connect(const char *path, unsigned lcore_id);
+
+/**
+ * Disconnect from an already connected Virtio-Serial Endpoint.
+ *
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ */
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+/**
+ * Send a message contained in pkt over the Virtio-Serial to the host endpoint.
+ *
+ * @param pkt
+ * Pointer to a populated struct guest_agent_pkt
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on channel not connected.
+ * - errno on write to channel error.
+ */
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 07/10] librte_power common interface for Guest and Host
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (5 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
` (5 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
Moved the current librte_power implementation to rte_power_acpi_cpufreq, with
renaming of functions only.
Added rte_power_kvm_vm implmentation to support Power Management from a VM.
librte_power now hides the implementation based on the environment used.
A new call rte_power_set_env() can explicidly set the environment, if not
called then auto-detection takes place.
rte_power_kvm_vm is subset of the librte_power APIs, the following is supported:
rte_power_init(unsigned lcore_id)
rte_power_exit(unsigned lcore_id)
rte_power_freq_up(unsigned lcore_id)
rte_power_freq_down(unsigned lcore_id)
rte_power_freq_min(unsigned lcore_id)
rte_power_freq_max(unsigned lcore_id)
The other unsupported APIs return -ENOTSUP
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/rte_power.c | 540 ++++-------------------------
lib/librte_power/rte_power.h | 120 +++++--
lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++++++++++++++++++
lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++++++++
lib/librte_power/rte_power_common.h | 39 +++
lib/librte_power/rte_power_kvm_vm.c | 135 ++++++++
lib/librte_power/rte_power_kvm_vm.h | 179 ++++++++++
7 files changed, 1248 insertions(+), 502 deletions(-)
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
create mode 100644 lib/librte_power/rte_power_common.h
create mode 100644 lib/librte_power/rte_power_kvm_vm.c
create mode 100644 lib/librte_power/rte_power_kvm_vm.h
diff --git a/lib/librte_power/rte_power.c b/lib/librte_power/rte_power.c
index 856da9a..998ed1c 100644
--- a/lib/librte_power/rte_power.c
+++ b/lib/librte_power/rte_power.c
@@ -31,515 +31,113 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <limits.h>
-
-#include <rte_memcpy.h>
#include <rte_atomic.h>
#include "rte_power.h"
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
-#ifdef RTE_LIBRTE_POWER_DEBUG
-#define POWER_DEBUG_TRACE(fmt, args...) do { \
- RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
- } while (0)
-#else
-#define POWER_DEBUG_TRACE(fmt, args...)
-#endif
-
-#define FOPEN_OR_ERR_RET(f, retval) do { \
- if ((f) == NULL) { \
- RTE_LOG(ERR, POWER, "File not openned\n"); \
- return (retval); \
- } \
-} while(0)
-
-#define FOPS_OR_NULL_GOTO(ret, label) do { \
- if ((ret) == NULL) { \
- RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
- goto label; \
- } \
-} while(0)
-
-#define FOPS_OR_ERR_GOTO(ret, label) do { \
- if ((ret) < 0) { \
- RTE_LOG(ERR, POWER, "File operations failed\n"); \
- goto label; \
- } \
-} while(0)
-
-#define STR_SIZE 1024
-#define POWER_CONVERT_TO_DECIMAL 10
+enum power_management_env global_default_env = PM_ENV_NOT_SET;
-#define POWER_GOVERNOR_USERSPACE "userspace"
-#define POWER_SYSFILE_GOVERNOR \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
-#define POWER_SYSFILE_AVAIL_FREQ \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
-#define POWER_SYSFILE_SETSPEED \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+volatile uint32_t global_env_cfg_status = 0;
-enum power_state {
- POWER_IDLE = 0,
- POWER_ONGOING,
- POWER_USED,
- POWER_UNKNOWN
-};
+/* function pointers */
+rte_power_freqs_t rte_power_freqs = NULL;
+rte_power_get_freq_t rte_power_get_freq = NULL;
+rte_power_set_freq_t rte_power_set_freq = NULL;
+rte_power_freq_change_t rte_power_freq_up = NULL;
+rte_power_freq_change_t rte_power_freq_down = NULL;
+rte_power_freq_change_t rte_power_freq_max = NULL;
+rte_power_freq_change_t rte_power_freq_min = NULL;
-/**
- * Power info per lcore.
- */
-struct rte_power_info {
- unsigned lcore_id; /**< Logical core id */
- uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
- uint32_t nb_freqs; /**< number of available freqs */
- FILE *f; /**< FD of scaling_setspeed */
- char governor_ori[32]; /**< Original governor name */
- uint32_t curr_idx; /**< Freq index in freqs array */
- volatile uint32_t state; /**< Power in use state */
-} __rte_cache_aligned;
-
-static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
-
-/**
- * It is to set specific freq for specific logical core, according to the index
- * of supported frequencies.
- */
-static int
-set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+int
+rte_power_set_env(enum power_management_env env)
{
- if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
- RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
- "should be less than %u\n", idx, pi->nb_freqs);
- return -1;
- }
-
- /* Check if it is the same as current */
- if (idx == pi->curr_idx)
+ if (rte_atomic32_cmpset(&global_env_cfg_status, 0, 1) == 0) {
return 0;
-
- POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
- idx, pi->freqs[idx], pi->lcore_id);
- if (fseek(pi->f, 0, SEEK_SET) < 0) {
- RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
- "for setting frequency for lcore %u\n", pi->lcore_id);
- return -1;
}
- if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
- RTE_LOG(ERR, POWER, "Fail to write new frequency for "
- "lcore %u\n", pi->lcore_id);
+ if (env == PM_ENV_ACPI_CPUFREQ) {
+ rte_power_freqs = rte_power_acpi_cpufreq_freqs;
+ rte_power_get_freq = rte_power_acpi_cpufreq_get_freq;
+ rte_power_set_freq = rte_power_acpi_cpufreq_set_freq;
+ rte_power_freq_up = rte_power_acpi_cpufreq_freq_up;
+ rte_power_freq_down = rte_power_acpi_cpufreq_freq_down;
+ rte_power_freq_min = rte_power_acpi_cpufreq_freq_min;
+ rte_power_freq_max = rte_power_acpi_cpufreq_freq_max;
+ } else if (env == PM_ENV_KVM_VM) {
+ rte_power_freqs = rte_power_kvm_vm_freqs;
+ rte_power_get_freq = rte_power_kvm_vm_get_freq;
+ rte_power_set_freq = rte_power_kvm_vm_set_freq;
+ rte_power_freq_up = rte_power_kvm_vm_freq_up;
+ rte_power_freq_down = rte_power_kvm_vm_freq_down;
+ rte_power_freq_min = rte_power_kvm_vm_freq_min;
+ rte_power_freq_max = rte_power_kvm_vm_freq_max;
+ } else {
+ RTE_LOG(ERR, POWER, "Invalid Power Management Environment(%d) set\n",
+ env);
+ rte_power_unset_env();
return -1;
}
- fflush(pi->f);
- pi->curr_idx = idx;
-
- return 1;
-}
-
-/**
- * It is to check the current scaling governor by reading sys file, and then
- * set it into 'userspace' if it is not by writing the sys file. The original
- * governor will be saved for rolling back.
- */
-static int
-power_set_governor_userspace(struct rte_power_info *pi)
-{
- FILE *f;
- int ret = -1;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *s;
- int val;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Check if current governor is userspace */
- if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
- sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
- ret = 0;
- POWER_DEBUG_TRACE("Power management governor of lcore %u is "
- "already userspace\n", pi->lcore_id);
- goto out;
- }
- /* Save the original governor */
- snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
-
- /* Write 'userspace' to the governor */
- val = fseek(f, 0, SEEK_SET);
- FOPS_OR_ERR_GOTO(val, out);
-
- val = fputs(POWER_GOVERNOR_USERSPACE, f);
- FOPS_OR_ERR_GOTO(val, out);
-
- ret = 0;
- RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
- "set to user space successfully\n", pi->lcore_id);
-out:
- fclose(f);
+ global_default_env = env;
+ return 0;
- return ret;
}
-/**
- * It is to get the available frequencies of the specific lcore by reading the
- * sys file.
- */
-static int
-power_get_available_freqs(struct rte_power_info *pi)
+void
+rte_power_unset_env(void)
{
- FILE *f;
- int ret = -1, i, count;
- char *p;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *freqs[RTE_MAX_LCORE_FREQS];
- char *s;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
- pi->lcore_id);
- f = fopen(fullpath, "r");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Strip the line break if there is */
- p = strchr(buf, '\n');
- if (p != NULL)
- *p = 0;
-
- /* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
- count = rte_strsplit(buf, sizeof(buf), freqs,
- RTE_MAX_LCORE_FREQS, ' ');
- if (count <= 0) {
- RTE_LOG(ERR, POWER, "No available frequency in "
- ""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
- goto out;
- }
- if (count >= RTE_MAX_LCORE_FREQS) {
- RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
- count);
- goto out;
- }
-
- /* Store the available frequncies into power context */
- for (i = 0, pi->nb_freqs = 0; i < count; i++) {
- POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
- i, freqs[i]);
- pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
- POWER_CONVERT_TO_DECIMAL);
- }
-
- ret = 0;
- POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
- count, pi->lcore_id);
-out:
- fclose(f);
-
- return ret;
+ if (rte_atomic32_cmpset(&global_env_cfg_status, 1, 0) != 0)
+ global_default_env = PM_ENV_NOT_SET;
}
-/**
- * It is to fopen the sys file for the future setting the lcore frequency.
- */
-static int
-power_init_for_setting_freq(struct rte_power_info *pi)
-{
- FILE *f;
- char fullpath[PATH_MAX];
- char buf[BUFSIZ];
- uint32_t i, freq;
- char *s;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, -1);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
- for (i = 0; i < pi->nb_freqs; i++) {
- if (freq == pi->freqs[i]) {
- pi->curr_idx = i;
- pi->f = f;
- return 0;
- }
- }
-
-out:
- fclose(f);
-
- return -1;
+enum power_management_env
+rte_power_get_env(void) {
+ return global_default_env;
}
int
rte_power_init(unsigned lcore_id)
{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
- == 0) {
- RTE_LOG(INFO, POWER, "Power management of lcore %u is "
- "in use\n", lcore_id);
- return -1;
- }
-
- pi->lcore_id = lcore_id;
- /* Check and set the governor */
- if (power_set_governor_userspace(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
- "userspace\n", lcore_id);
- goto fail;
- }
+ int ret = -1;
- /* Get the available frequencies */
- if (power_get_available_freqs(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
- "lcore %u\n", lcore_id);
- goto fail;
+ if (global_default_env == PM_ENV_ACPI_CPUFREQ) {
+ return rte_power_acpi_cpufreq_init(lcore_id);
}
-
- /* Init for setting lcore frequency */
- if (power_init_for_setting_freq(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
- "lcore %u\n", lcore_id);
- goto fail;
+ if (global_default_env == PM_ENV_KVM_VM) {
+ return rte_power_kvm_vm_init(lcore_id);
}
-
- /* Set freq to max by default */
- if (rte_power_freq_max(lcore_id) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
- "to max\n", lcore_id);
- goto fail;
+ /* Auto detect Environment */
+ RTE_LOG(INFO, POWER, "Attempting to initialise ACPI cpufreq power "
+ "management...\n");
+ ret = rte_power_acpi_cpufreq_init(lcore_id);
+ if (ret == 0) {
+ rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ goto out;
}
- RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
- "power manamgement\n", lcore_id);
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
-
- return 0;
-
-fail:
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
-
- return -1;
-}
-
-/**
- * It is to check the governor and then set the original governor back if
- * needed by writing the the sys file.
- */
-static int
-power_set_governor_original(struct rte_power_info *pi)
-{
- FILE *f;
- int ret = -1;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *s;
- int val;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Check if the governor to be set is the same as current */
- if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
- ret = 0;
- POWER_DEBUG_TRACE("Power management governor of lcore %u "
- "has already been set to %s\n",
- pi->lcore_id, pi->governor_ori);
+ RTE_LOG(INFO, POWER, "Attempting to initialise VM power management...\n");
+ ret = rte_power_kvm_vm_init(lcore_id);
+ if (ret == 0) {
+ rte_power_set_env(PM_ENV_KVM_VM);
goto out;
}
-
- /* Write back the original governor */
- val = fseek(f, 0, SEEK_SET);
- FOPS_OR_ERR_GOTO(val, out);
-
- val = fputs(pi->governor_ori, f);
- FOPS_OR_ERR_GOTO(val, out);
-
- ret = 0;
- RTE_LOG(INFO, POWER, "Power manamgement governor of lcore %u "
- "has been set back to %s successfully\n",
- pi->lcore_id, pi->governor_ori);
+ RTE_LOG(ERR, POWER, "Unable to set Power Management Environment for lcore "
+ "%u\n", lcore_id);
out:
- fclose(f);
-
return ret;
}
int
rte_power_exit(unsigned lcore_id)
{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
- pi = &lcore_power_info[lcore_id];
- if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
- == 0) {
- RTE_LOG(INFO, POWER, "Power management of lcore %u is "
- "not used\n", lcore_id);
- return -1;
- }
-
- /* Close FD of setting freq */
- fclose(pi->f);
- pi->f = NULL;
-
- /* Set the governor back to the original */
- if (power_set_governor_original(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
- "to the original\n", lcore_id);
- goto fail;
- }
-
- RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
- "'userspace' mode and been set back to the "
- "original\n", lcore_id);
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
-
- return 0;
-
-fail:
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+ if (global_default_env == PM_ENV_ACPI_CPUFREQ)
+ return rte_power_acpi_cpufreq_exit(lcore_id);
+ if (global_default_env == PM_ENV_KVM_VM)
+ return rte_power_kvm_vm_exit(lcore_id);
+ RTE_LOG(ERR, POWER, "Environment has not been set, unable to exit "
+ "gracefully\n");
return -1;
-}
-
-uint32_t
-rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE || !freqs) {
- RTE_LOG(ERR, POWER, "Invalid input parameter\n");
- return 0;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (num < pi->nb_freqs) {
- RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
- return 0;
- }
- rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
-
- return pi->nb_freqs;
-}
-
-uint32_t
-rte_power_get_freq(unsigned lcore_id)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return RTE_POWER_INVALID_FREQ_INDEX;
- }
-
- return lcore_power_info[lcore_id].curr_idx;
-}
-
-int
-rte_power_set_freq(unsigned lcore_id, uint32_t index)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- return set_freq_internal(&(lcore_power_info[lcore_id]), index);
-}
-
-int
-rte_power_freq_down(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
- pi = &lcore_power_info[lcore_id];
- if (pi->curr_idx + 1 == pi->nb_freqs)
- return 0;
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->curr_idx + 1);
}
-
-int
-rte_power_freq_up(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (pi->curr_idx == 0)
- return 0;
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->curr_idx - 1);
-}
-
-int
-rte_power_freq_max(unsigned lcore_id)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(&lcore_power_info[lcore_id], 0);
-}
-
-int
-rte_power_freq_min(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->nb_freqs - 1);
-}
-
diff --git a/lib/librte_power/rte_power.h b/lib/librte_power/rte_power.h
index 9c1419e..9338069 100644
--- a/lib/librte_power/rte_power.h
+++ b/lib/librte_power/rte_power.h
@@ -48,12 +48,48 @@
extern "C" {
#endif
-#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+/* Power Management Environment State */
+enum power_management_env {PM_ENV_NOT_SET, PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM};
/**
- * Initialize power management for a specific lcore. It will check and set the
- * governor to userspace for the lcore, get the available frequencies, and
- * prepare to set new lcore frequency.
+ * Set the default power management implementation. If this is not called prior
+ * to rte_power_init(), then auto-detect of the environment will take place.
+ * It is not thread safe.
+ *
+ * @param env
+ * env. The environment in which to initialise Power Management for.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_set_env(enum power_management_env env);
+
+/**
+ * Unset the global environment configuration.
+ * This can only be called after all threads have completed.
+ *
+ * @param None.
+ *
+ * @return
+ * None.
+ */
+void rte_power_unset_env(void);
+
+/**
+ * Get the default power management implementation.
+ *
+ * @param None.
+ *
+ * @return
+ * power_management_env The configured environment.
+ */
+enum power_management_env rte_power_get_env(void);
+
+/**
+ * Initialize power management for a specific lcore. If rte_power_set_env() has
+ * not been called then an auto-detect of the environment will start and
+ * initialise the corresponding resources.
*
* @param lcore_id
* lcore id.
@@ -65,8 +101,9 @@ extern "C" {
int rte_power_init(unsigned lcore_id);
/**
- * Exit power management on a specific lcore. It will set the governor to which
- * is before initialized.
+ * Exit power management on a specific lcore. This will call the environment
+ * dependent exit function.
+ *
*
* @param lcore_id
* lcore id.
@@ -78,11 +115,9 @@ int rte_power_init(unsigned lcore_id);
int rte_power_exit(unsigned lcore_id);
/**
- * Get the available frequencies of a specific lcore. The return value will be
- * the minimal one of the total number of available frequencies and the number
- * of buffer. The index of available frequencies used in other interfaces
- * should be in the range of 0 to this return value.
- * It should be protected outside of this function for threadsafe.
+ * Get the available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -94,12 +129,15 @@ int rte_power_exit(unsigned lcore_id);
* @return
* The number of available frequencies.
*/
-uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
+typedef uint32_t (*rte_power_freqs_t)(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+extern rte_power_freqs_t rte_power_freqs;
/**
- * Return the current index of available frequencies of a specific lcore. It
- * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
- * It should be protected outside of this function for threadsafe.
+ * Return the current index of available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -107,12 +145,15 @@ uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
* @return
* The current index of available frequencies.
*/
-uint32_t rte_power_get_freq(unsigned lcore_id);
+typedef uint32_t (*rte_power_get_freq_t)(unsigned lcore_id);
+
+extern rte_power_get_freq_t rte_power_get_freq;
/**
* Set the new frequency for a specific lcore by indicating the index of
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -121,70 +162,87 @@ uint32_t rte_power_get_freq(unsigned lcore_id);
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_set_freq(unsigned lcore_id, uint32_t index);
+typedef int (*rte_power_set_freq_t)(unsigned lcore_id, uint32_t index);
+
+extern rte_power_set_freq_t rte_power_set_freq;
+
+/**
+ * Function pointer definition for generic frequency change functions. Review
+ * each environments specific documentation for usage.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+typedef int (*rte_power_freq_change_t)(unsigned lcore_id);
/**
* Scale up the frequency of a specific lcore according to the available
* frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_up(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_up;
/**
* Scale down the frequency of a specific lcore according to the available
* frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_down(unsigned lcore_id);
+
+extern rte_power_freq_change_t rte_power_freq_down;
/**
* Scale up the frequency of a specific lcore to the highest according to the
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_max(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_max;
/**
* Scale down the frequency of a specific lcore to the lowest according to the
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage..
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_min(unsigned lcore_id);
+rte_power_freq_change_t rte_power_freq_min;
#ifdef __cplusplus
}
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.c b/lib/librte_power/rte_power_acpi_cpufreq.c
new file mode 100644
index 0000000..09085c3
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.c
@@ -0,0 +1,545 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+
+#include <rte_memcpy.h>
+#include <rte_atomic.h>
+
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_common.h"
+
+#ifdef RTE_LIBRTE_POWER_DEBUG
+#define POWER_DEBUG_TRACE(fmt, args...) do { \
+ RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
+} while (0)
+#else
+#define POWER_DEBUG_TRACE(fmt, args...)
+#endif
+
+#define FOPEN_OR_ERR_RET(f, retval) do { \
+ if ((f) == NULL) { \
+ RTE_LOG(ERR, POWER, "File not openned\n"); \
+ return retval; \
+ } \
+} while (0)
+
+#define FOPS_OR_NULL_GOTO(ret, label) do { \
+ if ((ret) == NULL) { \
+ RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
+ goto label; \
+ } \
+} while (0)
+
+#define FOPS_OR_ERR_GOTO(ret, label) do { \
+ if ((ret) < 0) { \
+ RTE_LOG(ERR, POWER, "File operations failed\n"); \
+ goto label; \
+ } \
+} while (0)
+
+#define STR_SIZE 1024
+#define POWER_CONVERT_TO_DECIMAL 10
+
+#define POWER_GOVERNOR_USERSPACE "userspace"
+#define POWER_SYSFILE_GOVERNOR \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
+#define POWER_SYSFILE_AVAIL_FREQ \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
+#define POWER_SYSFILE_SETSPEED \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+
+enum power_state {
+ POWER_IDLE = 0,
+ POWER_ONGOING,
+ POWER_USED,
+ POWER_UNKNOWN
+};
+
+/**
+ * Power info per lcore.
+ */
+struct rte_power_info {
+ unsigned lcore_id; /**< Logical core id */
+ uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
+ uint32_t nb_freqs; /**< number of available freqs */
+ FILE *f; /**< FD of scaling_setspeed */
+ char governor_ori[32]; /**< Original governor name */
+ uint32_t curr_idx; /**< Freq index in freqs array */
+ volatile uint32_t state; /**< Power in use state */
+} __rte_cache_aligned;
+
+static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
+
+/**
+ * It is to set specific freq for specific logical core, according to the index
+ * of supported frequencies.
+ */
+static int
+set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+{
+ if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
+ RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
+ "should be less than %u\n", idx, pi->nb_freqs);
+ return -1;
+ }
+
+ /* Check if it is the same as current */
+ if (idx == pi->curr_idx)
+ return 0;
+
+ POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
+ idx, pi->freqs[idx], pi->lcore_id);
+ if (fseek(pi->f, 0, SEEK_SET) < 0) {
+ RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
+ "for setting frequency for lcore %u\n", pi->lcore_id);
+ return -1;
+ }
+ if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
+ RTE_LOG(ERR, POWER, "Fail to write new frequency for "
+ "lcore %u\n", pi->lcore_id);
+ return -1;
+ }
+ fflush(pi->f);
+ pi->curr_idx = idx;
+
+ return 1;
+}
+
+/**
+ * It is to check the current scaling governor by reading sys file, and then
+ * set it into 'userspace' if it is not by writing the sys file. The original
+ * governor will be saved for rolling back.
+ */
+static int
+power_set_governor_userspace(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *s;
+ int val;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Check if current governor is userspace */
+ if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
+ sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
+ ret = 0;
+ POWER_DEBUG_TRACE("Power management governor of lcore %u is "
+ "already userspace\n", pi->lcore_id);
+ goto out;
+ }
+ /* Save the original governor */
+ snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
+
+ /* Write 'userspace' to the governor */
+ val = fseek(f, 0, SEEK_SET);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ val = fputs(POWER_GOVERNOR_USERSPACE, f);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ ret = 0;
+ RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
+ "set to user space successfully\n", pi->lcore_id);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+/**
+ * It is to get the available frequencies of the specific lcore by reading the
+ * sys file.
+ */
+static int
+power_get_available_freqs(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1, i, count;
+ char *p;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *freqs[RTE_MAX_LCORE_FREQS];
+ char *s;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
+ pi->lcore_id);
+ f = fopen(fullpath, "r");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Strip the line break if there is */
+ p = strchr(buf, '\n');
+ if (p != NULL)
+ *p = 0;
+
+ /* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
+ count = rte_strsplit(buf, sizeof(buf), freqs,
+ RTE_MAX_LCORE_FREQS, ' ');
+ if (count <= 0) {
+ RTE_LOG(ERR, POWER, "No available frequency in "
+ ""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
+ goto out;
+ }
+ if (count >= RTE_MAX_LCORE_FREQS) {
+ RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
+ count);
+ goto out;
+ }
+
+ /* Store the available frequncies into power context */
+ for (i = 0, pi->nb_freqs = 0; i < count; i++) {
+ POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
+ i, freqs[i]);
+ pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
+ POWER_CONVERT_TO_DECIMAL);
+ }
+
+ ret = 0;
+ POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
+ count, pi->lcore_id);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+/**
+ * It is to fopen the sys file for the future setting the lcore frequency.
+ */
+static int
+power_init_for_setting_freq(struct rte_power_info *pi)
+{
+ FILE *f;
+ char fullpath[PATH_MAX];
+ char buf[BUFSIZ];
+ uint32_t i, freq;
+ char *s;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, -1);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
+ for (i = 0; i < pi->nb_freqs; i++) {
+ if (freq == pi->freqs[i]) {
+ pi->curr_idx = i;
+ pi->f = f;
+ return 0;
+ }
+ }
+
+ out:
+ fclose(f);
+
+ return -1;
+}
+
+int
+rte_power_acpi_cpufreq_init(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+ lcore_id, RTE_MAX_LCORE - 1U);
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
+ == 0) {
+ RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+ "in use\n", lcore_id);
+ return -1;
+ }
+
+ pi->lcore_id = lcore_id;
+ /* Check and set the governor */
+ if (power_set_governor_userspace(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
+ "userspace\n", lcore_id);
+ goto fail;
+ }
+
+ /* Get the available frequencies */
+ if (power_get_available_freqs(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
+ "lcore %u\n", lcore_id);
+ goto fail;
+ }
+
+ /* Init for setting lcore frequency */
+ if (power_init_for_setting_freq(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
+ "lcore %u\n", lcore_id);
+ goto fail;
+ }
+
+ /* Set freq to max by default */
+ if (rte_power_acpi_cpufreq_freq_max(lcore_id) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
+ "to max\n", lcore_id);
+ goto fail;
+ }
+
+ RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
+ "power manamgement\n", lcore_id);
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
+
+ return 0;
+
+ fail:
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+ return -1;
+}
+
+/**
+ * It is to check the governor and then set the original governor back if
+ * needed by writing the the sys file.
+ */
+static int
+power_set_governor_original(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *s;
+ int val;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Check if the governor to be set is the same as current */
+ if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
+ ret = 0;
+ POWER_DEBUG_TRACE("Power management governor of lcore %u "
+ "has already been set to %s\n",
+ pi->lcore_id, pi->governor_ori);
+ goto out;
+ }
+
+ /* Write back the original governor */
+ val = fseek(f, 0, SEEK_SET);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ val = fputs(pi->governor_ori, f);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ ret = 0;
+ RTE_LOG(INFO, POWER, "Power management governor of lcore %u "
+ "has been set back to %s successfully\n",
+ pi->lcore_id, pi->governor_ori);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+int
+rte_power_acpi_cpufreq_exit(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+ lcore_id, RTE_MAX_LCORE - 1U);
+ return -1;
+ }
+ pi = &lcore_power_info[lcore_id];
+ if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
+ == 0) {
+ RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+ "not used\n", lcore_id);
+ return -1;
+ }
+
+ /* Close FD of setting freq */
+ fclose(pi->f);
+ pi->f = NULL;
+
+ /* Set the governor back to the original */
+ if (power_set_governor_original(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
+ "to the original\n", lcore_id);
+ goto fail;
+ }
+
+ RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
+ "'userspace' mode and been set back to the "
+ "original\n", lcore_id);
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
+
+ return 0;
+
+ fail:
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+ return -1;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE || !freqs) {
+ RTE_LOG(ERR, POWER, "Invalid input parameter\n");
+ return 0;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (num < pi->nb_freqs) {
+ RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
+ return 0;
+ }
+ rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
+
+ return pi->nb_freqs;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_get_freq(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return RTE_POWER_INVALID_FREQ_INDEX;
+ }
+
+ return lcore_power_info[lcore_id].curr_idx;
+}
+
+int
+rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ return set_freq_internal(&(lcore_power_info[lcore_id]), index);
+}
+
+int
+rte_power_acpi_cpufreq_freq_down(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (pi->curr_idx + 1 == pi->nb_freqs)
+ return 0;
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->curr_idx + 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_up(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (pi->curr_idx == 0)
+ return 0;
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->curr_idx - 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_max(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(&lcore_power_info[lcore_id], 0);
+}
+
+int
+rte_power_acpi_cpufreq_freq_min(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->nb_freqs - 1);
+}
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.h b/lib/librte_power/rte_power_acpi_cpufreq.h
new file mode 100644
index 0000000..68578e9
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.h
@@ -0,0 +1,192 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_ACPI_CPUFREQ_H
+#define _RTE_POWER_ACPI_CPUFREQ_H
+
+/**
+ * @file
+ * RTE Power Management via userspace ACPI cpufreq
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore. It will check and set the
+ * governor to userspace for the lcore, get the available frequencies, and
+ * prepare to set new lcore frequency.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore. It will set the governor to which
+ * is before initialized.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore. The return value will be
+ * the minimal one of the total number of available frequencies and the number
+ * of buffer. The index of available frequencies used in other interfaces
+ * should be in the range of 0 to this return value.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param freqs
+ * The buffer array to save the frequencies.
+ * @param num
+ * The number of frequencies to get.
+ *
+ * @return
+ * The number of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore. It
+ * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * The current index of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param index
+ * The index of available frequencies.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency chnaged.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/lib/librte_power/rte_power_common.h b/lib/librte_power/rte_power_common.h
new file mode 100644
index 0000000..64bd168
--- /dev/null
+++ b/lib/librte_power/rte_power_common.h
@@ -0,0 +1,39 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_POWER_COMMON_H_
+#define RTE_POWER_COMMON_H_
+
+#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+
+#endif /* RTE_POWER_COMMON_H_ */
diff --git a/lib/librte_power/rte_power_kvm_vm.c b/lib/librte_power/rte_power_kvm_vm.c
new file mode 100644
index 0000000..3ccd92b
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.c
@@ -0,0 +1,135 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <errno.h>
+#include <string.h>
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
+
+#define FD_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+static struct channel_packet pkt[CHANNEL_CMDS_MAX_VM_CHANNELS];
+
+
+int
+rte_power_kvm_vm_init(unsigned lcore_id)
+{
+ if (lcore_id >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+ return -1;
+ }
+ pkt[lcore_id].command = CPU_POWER;
+ pkt[lcore_id].resource_id = lcore_id;
+ return guest_channel_host_connect(FD_PATH, lcore_id);
+}
+
+int
+rte_power_kvm_vm_exit(unsigned lcore_id)
+{
+ guest_channel_host_disconnect(lcore_id);
+ return 0;
+}
+
+uint32_t
+rte_power_kvm_vm_freqs(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t *freqs,
+ __attribute__((unused)) uint32_t num)
+{
+ RTE_LOG(ERR, POWER, "rte_power_freqs is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+uint32_t
+rte_power_kvm_vm_get_freq(__attribute__((unused)) unsigned lcore_id)
+{
+ RTE_LOG(ERR, POWER, "rte_power_get_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+int
+rte_power_kvm_vm_set_freq(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t index)
+{
+ RTE_LOG(ERR, POWER, "rte_power_set_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+static inline int
+send_msg(unsigned lcore_id, uint32_t scale_direction)
+{
+ int ret;
+ if (lcore_id >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+ return -1;
+ }
+ pkt[lcore_id].unit = scale_direction;
+ ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id);
+ if (ret == 0)
+ return 1;
+ RTE_LOG(DEBUG, POWER, "Error sending message: %s\n", strerror(ret));
+ return -1;
+}
+
+int
+rte_power_kvm_vm_freq_up(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_UP);
+}
+
+int
+rte_power_kvm_vm_freq_down(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_DOWN);
+}
+
+int
+rte_power_kvm_vm_freq_max(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_MAX);
+}
+
+int
+rte_power_kvm_vm_freq_min(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_MIN);
+}
diff --git a/lib/librte_power/rte_power_kvm_vm.h b/lib/librte_power/rte_power_kvm_vm.h
new file mode 100644
index 0000000..dcbc878
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.h
@@ -0,0 +1,179 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_KVM_VM_H
+#define _RTE_POWER_KVM_VM_H
+
+/**
+ * @file
+ * RTE Power Management KVM VM
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param freqs
+ * The buffer array to save the frequencies.
+ * @param num
+ * The number of frequencies to get.
+ *
+ * @return
+ * -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_freqs(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param index
+ * The index of available frequencies.
+ *
+ * @return
+ * -ENOTSUP
+ */
+int rte_power_kvm_vm_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore. This request is forwarded to the
+ * host monitor.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 08/10] Packet format for VM Power Management(Host and Guest).
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (6 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 07/10] librte_power common interface for Guest and Host Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
` (4 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
Provides a command packet format for host and guest.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/channel_commands.h | 77 +++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 lib/librte_power/channel_commands.h
diff --git a/lib/librte_power/channel_commands.h b/lib/librte_power/channel_commands.h
new file mode 100644
index 0000000..7e78a8b
--- /dev/null
+++ b/lib/librte_power/channel_commands.h
@@ -0,0 +1,77 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_COMMANDS_H_
+#define CHANNEL_COMMANDS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/* Maximum number of CPUs */
+#define CHANNEL_CMDS_MAX_CPUS 64
+#if CHANNEL_CMDS_MAX_CPUS > 64
+#error Maximum number of cores is 64, overflow is guaranteed to \
+ cause problems with VM Power Management
+#endif
+
+/* Maximum number of channels per VM */
+#define CHANNEL_CMDS_MAX_VM_CHANNELS 64
+
+/* Maximum number of channels per VM */
+#define CHANNEL_CMDS_MAX_VM_CHANNELS 64
+
+/* Valid Commands */
+#define CPU_POWER 1
+#define CPU_POWER_CONNECT 2
+
+/* CPU Power Command Scaling */
+#define CPU_POWER_SCALE_UP 1
+#define CPU_POWER_SCALE_DOWN 2
+#define CPU_POWER_SCALE_MAX 3
+#define CPU_POWER_SCALE_MIN 4
+
+struct channel_packet {
+ uint64_t resource_id; /**< core_num, device */
+ uint32_t unit; /**< scale down/up/min/max */
+ uint32_t command; /**< Power, IO, etc */
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_COMMANDS_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 09/10] Build system integration for VM Power Management(Guest and Host)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (7 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 10/10] VM Power Management Unit Tests Alan Carew
` (3 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
librte_power now contains both rte_power_acpi_cpufreq and rte_power_kvm_vm
implementations.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/librte_power/Makefile b/lib/librte_power/Makefile
index 6185812..d672a5a 100644
--- a/lib/librte_power/Makefile
+++ b/lib/librte_power/Makefile
@@ -37,7 +37,8 @@ LIB = librte_power.a
CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -fno-strict-aliasing
# all source are stored in SRCS-y
-SRCS-$(CONFIG_RTE_LIBRTE_POWER) := rte_power.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) := rte_power.c rte_power_acpi_cpufreq.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += rte_power_kvm_vm.c guest_channel.c
# install this header file
SYMLINK-$(CONFIG_RTE_LIBRTE_POWER)-include := rte_power.h
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v3 10/10] VM Power Management Unit Tests
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (8 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
@ 2014-09-29 15:18 ` Alan Carew
2014-09-29 17:29 ` [dpdk-dev] [PATCH v3 00/10] VM Power Management Neil Horman
` (2 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-09-29 15:18 UTC (permalink / raw)
To: dev
Updated the unit tests to cover both librte_power implementations as well as
the external API.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
app/test/Makefile | 3 +-
app/test/autotest_data.py | 26 ++
app/test/test_power.c | 445 +++---------------------------
app/test/test_power_acpi_cpufreq.c | 544 +++++++++++++++++++++++++++++++++++++
app/test/test_power_kvm_vm.c | 308 +++++++++++++++++++++
5 files changed, 917 insertions(+), 409 deletions(-)
create mode 100644 app/test/test_power_acpi_cpufreq.c
create mode 100644 app/test/test_power_kvm_vm.c
diff --git a/app/test/Makefile b/app/test/Makefile
index 37a3772..03ade39 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -119,7 +119,8 @@ endif
SRCS-$(CONFIG_RTE_LIBRTE_METER) += test_meter.c
SRCS-$(CONFIG_RTE_LIBRTE_KNI) += test_kni.c
-SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power.c test_power_acpi_cpufreq.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power_kvm_vm.c
SRCS-y += test_common.c
SRCS-$(CONFIG_RTE_LIBRTE_IVSHMEM) += test_ivshmem.c
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 878c72e..618a946 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -425,6 +425,32 @@ non_parallel_test_group_list = [
]
},
{
+ "Prefix" : "power_acpi_cpufreq",
+ "Memory" : all_sockets(512),
+ "Tests" :
+ [
+ {
+ "Name" : "Power ACPI cpufreq autotest",
+ "Command" : "power_acpi_cpufreq_autotest",
+ "Func" : default_autotest,
+ "Report" : None,
+ },
+ ]
+},
+{
+ "Prefix" : "power_kvm_vm",
+ "Memory" : "512",
+ "Tests" :
+ [
+ {
+ "Name" : "Power KVM VM autotest",
+ "Command" : "power_kvm_vm_autotest",
+ "Func" : default_autotest,
+ "Report" : None,
+ },
+ ]
+},
+{
"Prefix" : "lpm6",
"Memory" : "512",
"Tests" :
diff --git a/app/test/test_power.c b/app/test/test_power.c
index d9eb420..64a2305 100644
--- a/app/test/test_power.c
+++ b/app/test/test_power.c
@@ -41,437 +41,66 @@
#include <rte_power.h>
-#define TEST_POWER_LCORE_ID 2U
-#define TEST_POWER_LCORE_INVALID ((unsigned)RTE_MAX_LCORE)
-#define TEST_POWER_FREQS_NUM_MAX ((unsigned)RTE_MAX_LCORE_FREQS)
-
-#define TEST_POWER_SYSFILE_CUR_FREQ \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_cur_freq"
-
-static uint32_t total_freq_num;
-static uint32_t freqs[TEST_POWER_FREQS_NUM_MAX];
-
-static int
-check_cur_freq(unsigned lcore_id, uint32_t idx)
-{
-#define TEST_POWER_CONVERT_TO_DECIMAL 10
- FILE *f;
- char fullpath[PATH_MAX];
- char buf[BUFSIZ];
- uint32_t cur_freq;
- int ret = -1;
-
- if (snprintf(fullpath, sizeof(fullpath),
- TEST_POWER_SYSFILE_CUR_FREQ, lcore_id) < 0) {
- return 0;
- }
- f = fopen(fullpath, "r");
- if (f == NULL) {
- return 0;
- }
- if (fgets(buf, sizeof(buf), f) == NULL) {
- goto fail_get_cur_freq;
- }
- cur_freq = strtoul(buf, NULL, TEST_POWER_CONVERT_TO_DECIMAL);
- ret = (freqs[idx] == cur_freq ? 0 : -1);
-
-fail_get_cur_freq:
- fclose(f);
-
- return ret;
-}
-
-/* Check rte_power_freqs() */
-static int
-check_power_freqs(void)
-{
- uint32_t ret;
-
- total_freq_num = 0;
- memset(freqs, 0, sizeof(freqs));
-
- /* test with an invalid lcore id */
- ret = rte_power_freqs(TEST_POWER_LCORE_INVALID, freqs,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* test with NULL buffer to save available freqs */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, NULL,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully with "
- "NULL buffer on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* test of getting zero number of freqs */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs, 0);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully with "
- "zero buffer size on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* test with all valid input parameters */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret == 0 || ret > TEST_POWER_FREQS_NUM_MAX) {
- printf("Fail to get available freqs on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Save the total number of available freqs */
- total_freq_num = ret;
-
- return 0;
-}
-
-/* Check rte_power_get_freq() */
-static int
-check_power_get_freq(void)
-{
- int ret;
- uint32_t count;
-
- /* test with an invalid lcore id */
- count = rte_power_get_freq(TEST_POWER_LCORE_INVALID);
- if (count < TEST_POWER_FREQS_NUM_MAX) {
- printf("Unexpectedly get freq index successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- count = rte_power_get_freq(TEST_POWER_LCORE_ID);
- if (count >= TEST_POWER_FREQS_NUM_MAX) {
- printf("Fail to get the freq index on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, count);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_set_freq() */
-static int
-check_power_set_freq(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_set_freq(TEST_POWER_LCORE_INVALID, 0);
- if (ret >= 0) {
- printf("Unexpectedly set freq index successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* test with an invalid freq index */
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret >= 0) {
- printf("Unexpectedly set an invalid freq index (%u)"
- "successfully on lcore %u\n", TEST_POWER_FREQS_NUM_MAX,
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /**
- * test with an invalid freq index which is right one bigger than
- * total number of freqs
- */
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num);
- if (ret >= 0) {
- printf("Unexpectedly set an invalid freq index (%u)"
- "successfully on lcore %u\n", total_freq_num,
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0) {
- printf("Fail to set freq index on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_down() */
-static int
-check_power_freq_down(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_down(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale down successfully the freq on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* Scale down to min and then scale down one step */
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- /* Scale up to max and then scale down one step */
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf ("Fail to scale down the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_up() */
-static int
-check_power_freq_up(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_up(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale up successfully the freq on %u\n",
- TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* Scale down to min and then scale up one step */
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 2);
- if (ret < 0)
- return -1;
-
- /* Scale up to max and then scale up one step */
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_max() */
-static int
-check_power_freq_max(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_max(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale up successfully the freq to max on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_min() */
-static int
-check_power_freq_min(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_min(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale down successfully the freq to min "
- "on lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
static int
test_power(void)
{
int ret = -1;
+ enum power_management_env env;
- /* test of init power management for an invalid lcore */
- ret = rte_power_init(TEST_POWER_LCORE_INVALID);
+ /* Test setting an invalid environment */
+ ret = rte_power_set_env(PM_ENV_NOT_SET);
if (ret == 0) {
- printf("Unexpectedly initialise power management successfully "
- "for lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- ret = rte_power_init(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Cannot initialise power management for lcore %u\n",
- TEST_POWER_LCORE_ID);
+ printf("Unexpectedly succeeded on setting an invalid environment\n");
return -1;
}
- /**
- * test of initialising power management for the lcore which has
- * been initialised
- */
- ret = rte_power_init(TEST_POWER_LCORE_ID);
- if (ret == 0) {
- printf("Unexpectedly init successfully power twice on "
- "lcore %u\n", TEST_POWER_LCORE_ID);
+ /* Test that the environment has not been set */
+ env = rte_power_get_env();
+ if (env != PM_ENV_NOT_SET) {
+ printf("Unexpectedly got a valid environment configuration\n");
return -1;
}
- ret = check_power_freqs();
- if (ret < 0)
+ /* verify that function pointers are NULL */
+ if (rte_power_freqs != NULL) {
+ printf("rte_power_freqs should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- if (total_freq_num < 2) {
- rte_power_exit(TEST_POWER_LCORE_ID);
- printf("Frequency can not be changed due to CPU itself\n");
- return 0;
}
-
- ret = check_power_get_freq();
- if (ret < 0)
- goto fail_all;
-
- ret = check_power_set_freq();
- if (ret < 0)
+ if (rte_power_get_freq != NULL) {
+ printf("rte_power_get_freq should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_down();
- if (ret < 0)
- goto fail_all;
-
- ret = check_power_freq_up();
- if (ret < 0)
+ }
+ if (rte_power_set_freq != NULL) {
+ printf("rte_power_set_freq should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_max();
- if (ret < 0)
+ }
+ if (rte_power_freq_up != NULL) {
+ printf("rte_power_freq_up should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_min();
- if (ret < 0)
+ }
+ if (rte_power_freq_down != NULL) {
+ printf("rte_power_freq_down should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = rte_power_exit(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Cannot exit power management for lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
}
-
- /**
- * test of exiting power management for the lcore which has been exited
- */
- ret = rte_power_exit(TEST_POWER_LCORE_ID);
- if (ret == 0) {
- printf("Unexpectedly exit successfully power management twice "
- "on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
+ if (rte_power_freq_max != NULL) {
+ printf("rte_power_freq_max should be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
}
-
- /* test of exit power management for an invalid lcore */
- ret = rte_power_exit(TEST_POWER_LCORE_INVALID);
- if (ret == 0) {
- printf("Unpectedly exit power management successfully for "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
+ if (rte_power_freq_min != NULL) {
+ printf("rte_power_freq_min should be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
}
-
+ rte_power_unset_env();
return 0;
-
fail_all:
- rte_power_exit(TEST_POWER_LCORE_ID);
-
+ rte_power_unset_env();
return -1;
}
diff --git a/app/test/test_power_acpi_cpufreq.c b/app/test/test_power_acpi_cpufreq.c
new file mode 100644
index 0000000..8848d75
--- /dev/null
+++ b/app/test/test_power_acpi_cpufreq.c
@@ -0,0 +1,544 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <limits.h>
+#include <string.h>
+
+#include "test.h"
+
+#include <rte_power.h>
+
+#define TEST_POWER_LCORE_ID 2U
+#define TEST_POWER_LCORE_INVALID ((unsigned)RTE_MAX_LCORE)
+#define TEST_POWER_FREQS_NUM_MAX ((unsigned)RTE_MAX_LCORE_FREQS)
+
+#define TEST_POWER_SYSFILE_CUR_FREQ \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_cur_freq"
+
+static uint32_t total_freq_num;
+static uint32_t freqs[TEST_POWER_FREQS_NUM_MAX];
+
+static int
+check_cur_freq(unsigned lcore_id, uint32_t idx)
+{
+#define TEST_POWER_CONVERT_TO_DECIMAL 10
+ FILE *f;
+ char fullpath[PATH_MAX];
+ char buf[BUFSIZ];
+ uint32_t cur_freq;
+ int ret = -1;
+
+ if (snprintf(fullpath, sizeof(fullpath),
+ TEST_POWER_SYSFILE_CUR_FREQ, lcore_id) < 0) {
+ return 0;
+ }
+ f = fopen(fullpath, "r");
+ if (f == NULL) {
+ return 0;
+ }
+ if (fgets(buf, sizeof(buf), f) == NULL) {
+ goto fail_get_cur_freq;
+ }
+ cur_freq = strtoul(buf, NULL, TEST_POWER_CONVERT_TO_DECIMAL);
+ ret = (freqs[idx] == cur_freq ? 0 : -1);
+
+fail_get_cur_freq:
+ fclose(f);
+
+ return ret;
+}
+
+/* Check rte_power_freqs() */
+static int
+check_power_freqs(void)
+{
+ uint32_t ret;
+
+ total_freq_num = 0;
+ memset(freqs, 0, sizeof(freqs));
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freqs(TEST_POWER_LCORE_INVALID, freqs,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* test with NULL buffer to save available freqs */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, NULL,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully with "
+ "NULL buffer on lcore %u\n", TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* test of getting zero number of freqs */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs, 0);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully with "
+ "zero buffer size on lcore %u\n", TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* test with all valid input parameters */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret == 0 || ret > TEST_POWER_FREQS_NUM_MAX) {
+ printf("Fail to get available freqs on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Save the total number of available freqs */
+ total_freq_num = ret;
+
+ return 0;
+}
+
+/* Check rte_power_get_freq() */
+static int
+check_power_get_freq(void)
+{
+ int ret;
+ uint32_t count;
+
+ /* test with an invalid lcore id */
+ count = rte_power_get_freq(TEST_POWER_LCORE_INVALID);
+ if (count < TEST_POWER_FREQS_NUM_MAX) {
+ printf("Unexpectedly get freq index successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ count = rte_power_get_freq(TEST_POWER_LCORE_ID);
+ if (count >= TEST_POWER_FREQS_NUM_MAX) {
+ printf("Fail to get the freq index on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, count);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_set_freq() */
+static int
+check_power_set_freq(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_INVALID, 0);
+ if (ret >= 0) {
+ printf("Unexpectedly set freq index successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* test with an invalid freq index */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret >= 0) {
+ printf("Unexpectedly set an invalid freq index (%u)"
+ "successfully on lcore %u\n", TEST_POWER_FREQS_NUM_MAX,
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /**
+ * test with an invalid freq index which is right one bigger than
+ * total number of freqs
+ */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num);
+ if (ret >= 0) {
+ printf("Unexpectedly set an invalid freq index (%u)"
+ "successfully on lcore %u\n", total_freq_num,
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0) {
+ printf("Fail to set freq index on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_down() */
+static int
+check_power_freq_down(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_down(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale down successfully the freq on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Scale down to min and then scale down one step */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ /* Scale up to max and then scale down one step */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf ("Fail to scale down the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_up() */
+static int
+check_power_freq_up(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_up(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale up successfully the freq on %u\n",
+ TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Scale down to min and then scale up one step */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 2);
+ if (ret < 0)
+ return -1;
+
+ /* Scale up to max and then scale up one step */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_max() */
+static int
+check_power_freq_max(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale up successfully the freq to max on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_min() */
+static int
+check_power_freq_min(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale down successfully the freq to min "
+ "on lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+static int
+test_power_acpi_cpufreq(void)
+{
+ int ret = -1;
+ enum power_management_env env;
+
+ ret = rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ if (ret != 0) {
+ printf("Failed on setting environment to PM_ENV_ACPI_CPUFREQ, this "
+ "may occur if environment is not configured correctly or "
+ " operating in another valid Power management environment\n");
+ return -1;
+ }
+
+ /* Test environment configuration */
+ env = rte_power_get_env();
+ if (env != PM_ENV_ACPI_CPUFREQ) {
+ printf("Unexpectedly got an environment other than ACPI cpufreq\n");
+ goto fail_all;
+ }
+
+ /* verify that function pointers are not NULL */
+ if (rte_power_freqs == NULL) {
+ printf("rte_power_freqs should not be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_get_freq == NULL) {
+ printf("rte_power_get_freq should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_set_freq == NULL) {
+ printf("rte_power_set_freq should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_up == NULL) {
+ printf("rte_power_freq_up should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_down == NULL) {
+ printf("rte_power_freq_down should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_max == NULL) {
+ printf("rte_power_freq_max should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_min == NULL) {
+ printf("rte_power_freq_min should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+
+ /* test of init power management for an invalid lcore */
+ ret = rte_power_init(TEST_POWER_LCORE_INVALID);
+ if (ret == 0) {
+ printf("Unexpectedly initialise power management successfully "
+ "for lcore %u\n", TEST_POWER_LCORE_INVALID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* Test initialisation of a valid lcore */
+ ret = rte_power_init(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Cannot initialise power management for lcore %u, this "
+ "may occur if environment is not configured "
+ "correctly(APCI cpufreq) or operating in another valid "
+ "Power management environment\n", TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /**
+ * test of initialising power management for the lcore which has
+ * been initialised
+ */
+ ret = rte_power_init(TEST_POWER_LCORE_ID);
+ if (ret == 0) {
+ printf("Unexpectedly init successfully power twice on "
+ "lcore %u\n", TEST_POWER_LCORE_ID);
+ goto fail_all;
+ }
+
+ ret = check_power_freqs();
+ if (ret < 0)
+ goto fail_all;
+
+ if (total_freq_num < 2) {
+ rte_power_exit(TEST_POWER_LCORE_ID);
+ printf("Frequency can not be changed due to CPU itself\n");
+ rte_power_unset_env();
+ return 0;
+ }
+
+ ret = check_power_get_freq();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_set_freq();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_down();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_up();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_max();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = check_power_freq_min();
+ if (ret < 0)
+ goto fail_all;
+
+ ret = rte_power_exit(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Cannot exit power management for lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /**
+ * test of exiting power management for the lcore which has been exited
+ */
+ ret = rte_power_exit(TEST_POWER_LCORE_ID);
+ if (ret == 0) {
+ printf("Unexpectedly exit successfully power management twice "
+ "on lcore %u\n", TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* test of exit power management for an invalid lcore */
+ ret = rte_power_exit(TEST_POWER_LCORE_INVALID);
+ if (ret == 0) {
+ printf("Unpectedly exit power management successfully for "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ rte_power_unset_env();
+ return -1;
+ }
+ rte_power_unset_env();
+ return 0;
+
+fail_all:
+ rte_power_exit(TEST_POWER_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+}
+
+static struct test_command power_acpi_cpufreq_cmd = {
+ .command = "power_acpi_cpufreq_autotest",
+ .callback = test_power_acpi_cpufreq,
+};
+REGISTER_TEST_COMMAND(power_acpi_cpufreq_cmd);
diff --git a/app/test/test_power_kvm_vm.c b/app/test/test_power_kvm_vm.c
new file mode 100644
index 0000000..ac0fcb6
--- /dev/null
+++ b/app/test/test_power_kvm_vm.c
@@ -0,0 +1,308 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <limits.h>
+#include <string.h>
+
+#include "test.h"
+
+#include <rte_power.h>
+#include <rte_config.h>
+
+#define TEST_POWER_VM_LCORE_ID 0U
+#define TEST_POWER_VM_LCORE_OUT_OF_BOUNDS (RTE_MAX_LCORE+1)
+#define TEST_POWER_VM_LCORE_INVALID 1U
+
+static int
+test_power_kvm_vm(void)
+{
+ int ret;
+ enum power_management_env env;
+
+ ret = rte_power_set_env(PM_ENV_KVM_VM);
+ if (ret != 0) {
+ printf("Failed on setting environment to PM_ENV_KVM_VM\n");
+ return -1;
+ }
+
+ /* Test environment configuration */
+ env = rte_power_get_env();
+ if (env != PM_ENV_KVM_VM) {
+ printf("Unexpectedly got a Power Management environment other than "
+ "KVM VM\n");
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* verify that function pointers are not NULL */
+ if (rte_power_freqs == NULL) {
+ printf("rte_power_freqs should not be NULL, environment has not been "
+ "initialised\n");
+ return -1;
+ }
+ if (rte_power_get_freq == NULL) {
+ printf("rte_power_get_freq should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_set_freq == NULL) {
+ printf("rte_power_set_freq should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_up == NULL) {
+ printf("rte_power_freq_up should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_down == NULL) {
+ printf("rte_power_freq_down should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_max == NULL) {
+ printf("rte_power_freq_max should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ if (rte_power_freq_min == NULL) {
+ printf("rte_power_freq_min should not be NULL, environment has not "
+ "been initialised\n");
+ return -1;
+ }
+ /* Test initialisation of an out of bounds lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret != -1) {
+ printf("rte_power_init unexpectedly succeeded on an invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* Test initialisation of a valid lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_ID);
+ if (ret < 0) {
+ printf("Cannot initialise power management for lcore %u, this "
+ "may occur if environment is not configured "
+ "correctly(KVM VM) or operating in another valid "
+ "Power management environment\n", TEST_POWER_VM_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+ }
+
+ /* Test initialisation of previously initialised lcore */
+ ret = rte_power_init(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_init unexpectedly succeeded on calling init twice on"
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency up of invalid lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_up unexpectedly succeeded on invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency down of invalid lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_down unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency min of invalid lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_min unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency max of invalid lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ if (ret == 1) {
+ printf("rte_power_freq_max unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_OUT_OF_BOUNDS);
+ goto fail_all;
+ }
+
+ /* Test frequency up of valid but uninitialised lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_up unexpectedly succeeded on invalid lcore %u\n",
+ TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency down of valid but uninitialised lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_down unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency min of valid but uninitialised lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_min unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency max of valid but uninitialised lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_INVALID);
+ if (ret == 1) {
+ printf("rte_power_freq_max unexpectedly succeeded on invalid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_INVALID);
+ goto fail_all;
+ }
+
+ /* Test frequency up of valid lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_up unexpectedly failed on valid lcore %u\n",
+ TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency down of valid lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_down unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency min of valid lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_min unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency max of valid lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_ID);
+ if (ret != 1) {
+ printf("rte_power_freq_max unexpectedly failed on valid lcore "
+ "%u\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test unsupported rte_power_freqs */
+ ret = rte_power_freqs(TEST_POWER_VM_LCORE_ID, NULL, 0);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_freqs did not return the expected -ENOTSUP(%d) but "
+ "returned %d\n", -ENOTSUP, ret);
+ goto fail_all;
+ }
+
+ /* Test unsupported rte_power_get_freq */
+ ret = rte_power_get_freq(TEST_POWER_VM_LCORE_ID);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_get_freq did not return the expected -ENOTSUP(%d) but"
+ " returned %d for lcore %u\n",
+ -ENOTSUP, ret, TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test unsupported rte_power_set_freq */
+ ret = rte_power_set_freq(TEST_POWER_VM_LCORE_ID, 0);
+ if (ret != -ENOTSUP) {
+ printf("rte_power_set_freq did not return the expected -ENOTSUP(%d) but"
+ " returned %d for lcore %u\n",
+ -ENOTSUP, ret, TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test removing of an lcore */
+ ret = rte_power_exit(TEST_POWER_VM_LCORE_ID);
+ if (ret != 0) {
+ printf("rte_power_exit unexpectedly failed on valid lcore %u,"
+ "please ensure that the environment has been configured "
+ "correctly\n", TEST_POWER_VM_LCORE_ID);
+ goto fail_all;
+ }
+
+ /* Test frequency up of previously removed lcore */
+ ret = rte_power_freq_up(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_up unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency down of previously removed lcore */
+ ret = rte_power_freq_down(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_down unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency min of previously removed lcore */
+ ret = rte_power_freq_min(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_min unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+
+ /* Test frequency max of previously removed lcore */
+ ret = rte_power_freq_max(TEST_POWER_VM_LCORE_ID);
+ if (ret == 0) {
+ printf("rte_power_freq_max unexpectedly succeeded on a removed "
+ "lcore %u\n", TEST_POWER_VM_LCORE_ID);
+ return -1;
+ }
+ rte_power_unset_env();
+ return 0;
+fail_all:
+ rte_power_exit(TEST_POWER_VM_LCORE_ID);
+ rte_power_unset_env();
+ return -1;
+}
+
+static struct test_command power_kvm_vm_cmd = {
+ .command = "power_kvm_vm_autotest",
+ .callback = test_power_kvm_vm,
+};
+REGISTER_TEST_COMMAND(power_kvm_vm_cmd);
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* Re: [dpdk-dev] [PATCH v3 00/10] VM Power Management
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (9 preceding siblings ...)
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 10/10] VM Power Management Unit Tests Alan Carew
@ 2014-09-29 17:29 ` Neil Horman
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
2014-11-10 9:19 ` [dpdk-dev] [PATCH v2] librte_cmdline: FreeBSD Fix oveflow when size of command result structure is greater than BUFSIZ Alan Carew
12 siblings, 0 replies; 97+ messages in thread
From: Neil Horman @ 2014-09-29 17:29 UTC (permalink / raw)
To: Alan Carew; +Cc: dev
On Mon, Sep 29, 2014 at 04:18:13PM +0100, Alan Carew wrote:
> Virtual Machine Power Management.
>
> The following patches add two DPDK sample applications and an alternate
> implementation of librte_power for use in virtualized environments.
> The idea is to provide librte_power functionality from within a VM to address
> the lack of MSRs to facilitate frequency changes from within a VM.
> It is ideally suited for Haswell which provides per core frequency scaling.
>
> The current librte_power affects frequency changes via the acpi-cpufreq
> 'userspace' power governor, accessed via sysfs.
>
> General Overview:(more information in each patch that follows).
> The VM Power Management solution provides two components:
>
> 1)VM: Allows for the a DPDK application in a VM to reuse the librte_power
> interface. Each lcore opens a Virto-Serial endpoint channel to the host,
> where the re-implementation of librte_power simply forwards the requests for
> frequency change to a host based monitor. The host monitor itself uses
> librte_power.
> Each lcore channel corresponds to a
> serial device '/dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>'
> which is opened in non-blocking mode.
> While each Virtual CPU can be mapped to multiple physical CPUs it is
> recommended that each vCPU should be mapped to a single core only.
>
> 2)Host: The host monitor is managed by a CLI, it allows for adding qemu/KVM
> virtual machines and associated channels to the monitor, manually changing
> CPU frequency, inspecting the state of VMs, vCPU to pCPU pinning and managing
> channels.
> Host channel endpoints are Virto-Serial endpoints configured as AF_UNIX file
> sockets which follow a specific naming convention
> i.e /tmp/powermonitor/<vm_name>.<channel_number>,
> each channel has an 1:1 mapping to a VM endpoint
> i.e. /dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>
> Host channel endpoints are opened in non-blocking mode and are monitored via epoll.
> Requests over each channel to change frequency are forwarded to the original
> librte_power.
>
> Channels must be manually configured as qemu-kvm command line arguments or
> libvirt domain definition(xml) e.g.
> <controller type='virtio-serial' index='0'>
> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
> </controller>
> <channel type='unix'>
> <source mode='bind' path='/tmp/powermonitor/<vm_name>.<channel_num>'/>
> <target type='virtio' name='virtio.serial.port.poweragent.<channel_num>/>
> <address type='virtio-serial' controller='0' bus='0' port='<N>'/>
> </channel>
>
> Where multiple channels can be configured by specifying multiple <channel>
> elements, by replacing <vm_name>, <channel_num>.
> <N>(port number) should be incremented by 1 for each new channel element.
> More information on Virtio-Serial can be found here:
> http://fedoraproject.org/wiki/Features/VirtioSerial
> To enable the Hypervisor creation of channels, the host endpoint directory
> must be created with qemu permissions:
> mkdir /tmp/powermonitor
> chown qemu:qemu /tmp/powermonitor
>
> The host application runs on two separate lcores:
> Core N) CLI: For management of Virtual Machines adding channels to Monitor thread,
> inspecting state and manually setting CPU frequency [PATCH 02/09]
> Core N+1) Monitor Thread: An epoll based infinite loop that waits on channel events
> from VMs and calls the corresponding librte_power functions.
>
> A sample application is also provided to run on Virtual Machines, this
> application provides a CLI to manually set the frequency of a
> vCPU[PATCH 08/09]
>
> The current l3fwd-power sample application can also be run on a VM.
>
> Changes in V3:
> Fixed crash in Guest CLI when host application is not running.
> Renamed #defines to be more specific to the module they belong
> Added vCPU pinning via CLI
> Testing feedback
>
> Changes in V2:
> Runtime selection of librte_power implementations.
> Updated Unit tests to cover librte_power changes.
> PATCH[0/3] was sent twice, again as PATCH[0/4]
> Miscellaneous fixes.
>
> Alan Carew (10):
> Channel Manager and Monitor for VM Power Management(Host).
> VM Power Management CLI(Host).
> CPU Frequency Power Management(Host).
> VM Power Management application and Makefile.
> VM Power Management CLI(Guest).
> VM communication channels for VM Power Management(Guest).
> librte_power common interface for Guest and Host
> Packet format for VM Power Management(Host and Guest).
> Build system integration for VM Power Management(Guest and Host)
> VM Power Management Unit Tests
>
> app/test/Makefile | 3 +-
> app/test/autotest_data.py | 26 +
> app/test/test_power.c | 445 +-----------
> app/test/test_power_acpi_cpufreq.c | 544 ++++++++++++++
> app/test/test_power_kvm_vm.c | 308 ++++++++
> examples/vm_power_manager/Makefile | 57 ++
> examples/vm_power_manager/channel_manager.c | 804 +++++++++++++++++++++
> examples/vm_power_manager/channel_manager.h | 314 ++++++++
> examples/vm_power_manager/channel_monitor.c | 228 ++++++
> examples/vm_power_manager/channel_monitor.h | 102 +++
> examples/vm_power_manager/guest_cli/Makefile | 56 ++
> examples/vm_power_manager/guest_cli/main.c | 87 +++
> examples/vm_power_manager/guest_cli/main.h | 52 ++
> .../guest_cli/vm_power_cli_guest.c | 155 ++++
> .../guest_cli/vm_power_cli_guest.h | 55 ++
> examples/vm_power_manager/main.c | 113 +++
> examples/vm_power_manager/main.h | 52 ++
> examples/vm_power_manager/power_manager.c | 244 +++++++
> examples/vm_power_manager/power_manager.h | 188 +++++
> examples/vm_power_manager/vm_power_cli.c | 669 +++++++++++++++++
> examples/vm_power_manager/vm_power_cli.h | 47 ++
> lib/librte_power/Makefile | 3 +-
> lib/librte_power/channel_commands.h | 77 ++
> lib/librte_power/guest_channel.c | 162 +++++
> lib/librte_power/guest_channel.h | 89 +++
> lib/librte_power/rte_power.c | 540 ++------------
> lib/librte_power/rte_power.h | 120 ++-
> lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++
> lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++
> lib/librte_power/rte_power_common.h | 39 +
> lib/librte_power/rte_power_kvm_vm.c | 135 ++++
> lib/librte_power/rte_power_kvm_vm.h | 179 +++++
> 32 files changed, 5718 insertions(+), 912 deletions(-)
> create mode 100644 app/test/test_power_acpi_cpufreq.c
> create mode 100644 app/test/test_power_kvm_vm.c
> create mode 100644 examples/vm_power_manager/Makefile
> create mode 100644 examples/vm_power_manager/channel_manager.c
> create mode 100644 examples/vm_power_manager/channel_manager.h
> create mode 100644 examples/vm_power_manager/channel_monitor.c
> create mode 100644 examples/vm_power_manager/channel_monitor.h
> create mode 100644 examples/vm_power_manager/guest_cli/Makefile
> create mode 100644 examples/vm_power_manager/guest_cli/main.c
> create mode 100644 examples/vm_power_manager/guest_cli/main.h
> create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
> create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
> create mode 100644 examples/vm_power_manager/main.c
> create mode 100644 examples/vm_power_manager/main.h
> create mode 100644 examples/vm_power_manager/power_manager.c
> create mode 100644 examples/vm_power_manager/power_manager.h
> create mode 100644 examples/vm_power_manager/vm_power_cli.c
> create mode 100644 examples/vm_power_manager/vm_power_cli.h
> create mode 100644 lib/librte_power/channel_commands.h
> create mode 100644 lib/librte_power/guest_channel.c
> create mode 100644 lib/librte_power/guest_channel.h
> create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
> create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
> create mode 100644 lib/librte_power/rte_power_common.h
> create mode 100644 lib/librte_power/rte_power_kvm_vm.c
> create mode 100644 lib/librte_power/rte_power_kvm_vm.h
>
> --
> 1.9.3
>
>
This all seems to be reasonable. Thanks
Acked-by: Neil Horman <nhorman@tuxdriver.com>
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 00/10] VM Power Management
2014-09-29 15:18 ` [dpdk-dev] [PATCH v3 " Alan Carew
` (10 preceding siblings ...)
2014-09-29 17:29 ` [dpdk-dev] [PATCH v3 00/10] VM Power Management Neil Horman
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
` (12 more replies)
2014-11-10 9:19 ` [dpdk-dev] [PATCH v2] librte_cmdline: FreeBSD Fix oveflow when size of command result structure is greater than BUFSIZ Alan Carew
12 siblings, 13 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
Virtual Machine Power Management.
The following patches add two DPDK sample applications and an alternate
implementation of librte_power for use in virtualized environments.
The idea is to provide librte_power functionality from within a VM to address
the lack of MSRs to facilitate frequency changes from within a VM.
It is ideally suited for Haswell which provides per core frequency scaling.
The current librte_power affects frequency changes via the acpi-cpufreq
'userspace' power governor, accessed via sysfs.
General Overview:(more information in each patch that follows).
The VM Power Management solution provides two components:
1)VM: Allows for the a DPDK application in a VM to reuse the librte_power
interface. Each lcore opens a Virto-Serial endpoint channel to the host,
where the re-implementation of librte_power simply forwards the requests for
frequency change to a host based monitor. The host monitor itself uses
librte_power.
Each lcore channel corresponds to a
serial device '/dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>'
which is opened in non-blocking mode.
While each Virtual CPU can be mapped to multiple physical CPUs it is
recommended that each vCPU should be mapped to a single core only.
2)Host: The host monitor is managed by a CLI, it allows for adding qemu/KVM
virtual machines and associated channels to the monitor, manually changing
CPU frequency, inspecting the state of VMs, vCPU to pCPU pinning and managing
channels.
Host channel endpoints are Virto-Serial endpoints configured as AF_UNIX file
sockets which follow a specific naming convention
i.e /tmp/powermonitor/<vm_name>.<channel_number>,
each channel has an 1:1 mapping to a VM endpoint
i.e. /dev/virtio-ports/virtio.serial.port.poweragent.<lcore_num>
Host channel endpoints are opened in non-blocking mode and are monitored via epoll.
Requests over each channel to change frequency are forwarded to the original
librte_power.
Channels must be manually configured as qemu-kvm command line arguments or
libvirt domain definition(xml) e.g.
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<channel type='unix'>
<source mode='bind' path='/tmp/powermonitor/<vm_name>.<channel_num>'/>
<target type='virtio' name='virtio.serial.port.poweragent.<channel_num>/>
<address type='virtio-serial' controller='0' bus='0' port='<N>'/>
</channel>
Where multiple channels can be configured by specifying multiple <channel>
elements, by replacing <vm_name>, <channel_num>.
<N>(port number) should be incremented by 1 for each new channel element.
More information on Virtio-Serial can be found here:
http://fedoraproject.org/wiki/Features/VirtioSerial
To enable the Hypervisor creation of channels, the host endpoint directory
must be created with qemu permissions:
mkdir /tmp/powermonitor
chown qemu:qemu /tmp/powermonitor
The host application runs on two separate lcores:
Core N) CLI: For management of Virtual Machines adding channels to Monitor thread,
inspecting state and manually setting CPU frequency [PATCH 02/09]
Core N+1) Monitor Thread: An epoll based infinite loop that waits on channel events
from VMs and calls the corresponding librte_power functions.
A sample application is also provided to run on Virtual Machines, this
application provides a CLI to manually set the frequency of a
vCPU[PATCH 08/09]
The current l3fwd-power sample application can also be run on a VM.
Changes in V4:
Fixed double free of channel during VM shutdown.
Changes in V3:
Fixed crash in Guest CLI when host application is not running.
Renamed #defines to be more specific to the module they belong
Added vCPU pinning via CLI
Changes in V2:
Runtime selection of librte_power implementations.
Updated Unit tests to cover librte_power changes.
PATCH[0/3] was sent twice, again as PATCH[0/4]
Miscellaneous fixes.
Alan Carew (10):
Channel Manager and Monitor for VM Power Management(Host).
VM Power Management CLI(Host).
CPU Frequency Power Management(Host).
VM Power Management application and Makefile.
VM Power Management CLI(Guest).
VM communication channels for VM Power Management(Guest).
librte_power common interface for Guest and Host
Packet format for VM Power Management(Host and Guest).
Build system integration for VM Power Management(Guest and Host)
VM Power Management Unit Tests
app/test/Makefile | 3 +-
app/test/autotest_data.py | 26 +
app/test/test_power.c | 445 +-----------
app/test/test_power_acpi_cpufreq.c | 544 ++++++++++++++
app/test/test_power_kvm_vm.c | 308 ++++++++
examples/vm_power_manager/Makefile | 57 ++
examples/vm_power_manager/channel_manager.c | 804 +++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 314 ++++++++
examples/vm_power_manager/channel_monitor.c | 231 ++++++
examples/vm_power_manager/channel_monitor.h | 102 +++
examples/vm_power_manager/guest_cli/Makefile | 56 ++
examples/vm_power_manager/guest_cli/main.c | 87 +++
examples/vm_power_manager/guest_cli/main.h | 52 ++
.../guest_cli/vm_power_cli_guest.c | 155 ++++
.../guest_cli/vm_power_cli_guest.h | 55 ++
examples/vm_power_manager/main.c | 117 +++
examples/vm_power_manager/main.h | 52 ++
examples/vm_power_manager/power_manager.c | 244 +++++++
examples/vm_power_manager/power_manager.h | 188 +++++
examples/vm_power_manager/vm_power_cli.c | 669 +++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 ++
lib/librte_power/Makefile | 3 +-
lib/librte_power/channel_commands.h | 77 ++
lib/librte_power/guest_channel.c | 162 +++++
lib/librte_power/guest_channel.h | 89 +++
lib/librte_power/rte_power.c | 540 ++------------
lib/librte_power/rte_power.h | 120 ++-
lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++
lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++
lib/librte_power/rte_power_common.h | 39 +
lib/librte_power/rte_power_kvm_vm.c | 135 ++++
lib/librte_power/rte_power_kvm_vm.h | 179 +++++
32 files changed, 5725 insertions(+), 912 deletions(-)
create mode 100644 app/test/test_power_acpi_cpufreq.c
create mode 100644 app/test/test_power_kvm_vm.c
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
create mode 100644 lib/librte_power/channel_commands.h
create mode 100644 lib/librte_power/guest_channel.c
create mode 100644 lib/librte_power/guest_channel.h
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
create mode 100644 lib/librte_power/rte_power_common.h
create mode 100644 lib/librte_power/rte_power_kvm_vm.c
create mode 100644 lib/librte_power/rte_power_kvm_vm.h
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 01/10] Channel Manager and Monitor for VM Power Management(Host).
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 02/10] VM Power Management CLI(Host) Alan Carew
` (11 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
The manager is responsible for adding communications channels to the Monitor
thread, tracking and reporting VM state and employs the libvirt API for
synchronization with the KVM Hypervisor. The manager interacts with the
Hypervisor to discover the mapping of virtual CPUS(vCPUs) to the host
physical CPUS(pCPUs) and to inspect the VM running state.
The manager provides the following functionality to the CLI:
1) Connect to a libvirtd instance, default: qemu:///system
2) Add a VM to an internal list, each VM is identified by a "name" which must
correspond a valid libvirt Domain Name.
3) Add communication channels associated with a VM to the epoll based Monitor
thread.
The channels must exist and be in the form of:
/tmp/powermonitor/<vm_name>.<channel_number>. Each channel is a
Virtio-Serial endpoint configured as an AF_UNIX file socket and opened in
non-blocking mode.
Each VM can have a maximum of 64 channels associated with it.
4) Disable or re-enable VM communication channels, channels once added to the
Monitor thread remain in that threads control, however acting on channel
requests can be disabled and renabled via CLI.
The monitor is an epoll based infinite loop running in a separate thread that
waits on channel events from VMs and calls the corresponding functions. Channel
definitions from the manager are registered via the epoll event opaque pointer
when calling epoll_ctl(EPOLL_CTL_ADD), this allows for obtaining the channels
file descriptor for reading EPOLLIN events and mapping the vCPU to pCPU(s)
associated with a request from a particular VM.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/channel_manager.c | 804 ++++++++++++++++++++++++++++
examples/vm_power_manager/channel_manager.h | 314 +++++++++++
examples/vm_power_manager/channel_monitor.c | 231 ++++++++
examples/vm_power_manager/channel_monitor.h | 102 ++++
4 files changed, 1451 insertions(+)
create mode 100644 examples/vm_power_manager/channel_manager.c
create mode 100644 examples/vm_power_manager/channel_manager.h
create mode 100644 examples/vm_power_manager/channel_monitor.c
create mode 100644 examples/vm_power_manager/channel_monitor.h
diff --git a/examples/vm_power_manager/channel_manager.c b/examples/vm_power_manager/channel_manager.c
new file mode 100644
index 0000000..a14f191
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.c
@@ -0,0 +1,804 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/select.h>
+
+#include <rte_config.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+#include <rte_log.h>
+#include <rte_atomic.h>
+#include <rte_spinlock.h>
+
+#include <libvirt/libvirt.h>
+
+#include "channel_manager.h"
+#include "channel_commands.h"
+#include "channel_monitor.h"
+
+
+#define RTE_LOGTYPE_CHANNEL_MANAGER RTE_LOGTYPE_USER1
+
+#define ITERATIVE_BITMASK_CHECK_64(mask_u64b, i) \
+ for (i = 0; mask_u64b; mask_u64b &= ~(1ULL << i++)) \
+ if ((mask_u64b >> i) & 1) \
+
+/* Global pointer to libvirt connection */
+static virConnectPtr global_vir_conn_ptr;
+
+static unsigned char *global_cpumaps;
+static virVcpuInfo *global_vircpuinfo;
+static size_t global_maplen;
+
+static unsigned global_n_host_cpus;
+
+/*
+ * Represents a single Virtual Machine
+ */
+struct virtual_machine_info {
+ char name[CHANNEL_MGR_MAX_NAME_LEN];
+ rte_atomic64_t pcpu_mask[CHANNEL_CMDS_MAX_CPUS];
+ struct channel_info *channels[CHANNEL_CMDS_MAX_VM_CHANNELS];
+ uint64_t channel_mask;
+ uint8_t num_channels;
+ enum vm_status status;
+ virDomainPtr domainPtr;
+ virDomainInfo info;
+ rte_spinlock_t config_spinlock;
+ LIST_ENTRY(virtual_machine_info) vms_info;
+};
+
+LIST_HEAD(, virtual_machine_info) vm_list_head;
+
+static struct virtual_machine_info *
+find_domain_by_name(const char *name)
+{
+ struct virtual_machine_info *info;
+ LIST_FOREACH(info, &vm_list_head, vms_info) {
+ if (!strncmp(info->name, name, CHANNEL_MGR_MAX_NAME_LEN-1))
+ return info;
+ }
+ return NULL;
+}
+
+static int
+update_pcpus_mask(struct virtual_machine_info *vm_info)
+{
+ virVcpuInfoPtr cpuinfo;
+ unsigned i, j;
+ int n_vcpus;
+ uint64_t mask;
+
+ memset(global_cpumaps, 0, CHANNEL_CMDS_MAX_CPUS*global_maplen);
+
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ n_vcpus = virDomainGetVcpuPinInfo(vm_info->domainPtr,
+ vm_info->info.nrVirtCpu, global_cpumaps, global_maplen,
+ VIR_DOMAIN_AFFECT_CONFIG);
+ if (n_vcpus < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting vCPU info for "
+ "in-active VM '%s'\n", vm_info->name);
+ return -1;
+ }
+ goto update_pcpus;
+ }
+
+ memset(global_vircpuinfo, 0, sizeof(*global_vircpuinfo)*
+ CHANNEL_CMDS_MAX_CPUS);
+
+ cpuinfo = global_vircpuinfo;
+
+ n_vcpus = virDomainGetVcpus(vm_info->domainPtr, cpuinfo,
+ CHANNEL_CMDS_MAX_CPUS, global_cpumaps, global_maplen);
+ if (n_vcpus < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting vCPU info for "
+ "active VM '%s'\n", vm_info->name);
+ return -1;
+ }
+update_pcpus:
+ if (n_vcpus >= CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Number of vCPUS(%u) is out of range "
+ "0...%d\n", n_vcpus, CHANNEL_CMDS_MAX_CPUS-1);
+ return -1;
+ }
+ if (n_vcpus != vm_info->info.nrVirtCpu) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Updating the number of vCPUs for VM '%s"
+ " from %d -> %d\n", vm_info->name, vm_info->info.nrVirtCpu,
+ n_vcpus);
+ vm_info->info.nrVirtCpu = n_vcpus;
+ }
+ for (i = 0; i < vm_info->info.nrVirtCpu; i++) {
+ mask = 0;
+ for (j = 0; j < global_n_host_cpus; j++) {
+ if (VIR_CPU_USABLE(global_cpumaps, global_maplen, i, j) > 0) {
+ mask |= 1ULL << j;
+ }
+ }
+ rte_atomic64_set(&vm_info->pcpu_mask[i], mask);
+ }
+ return 0;
+}
+
+int
+set_pcpus_mask(char *vm_name, unsigned vcpu, uint64_t core_mask)
+{
+ unsigned i = 0;
+ int flags = VIR_DOMAIN_AFFECT_LIVE|VIR_DOMAIN_AFFECT_CONFIG;
+ struct virtual_machine_info *vm_info;
+ uint64_t mask = core_mask;
+
+ if (vcpu >= CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "vCPU(%u) exceeds max allowable(%d)\n",
+ vcpu, CHANNEL_CMDS_MAX_CPUS-1);
+ return -1;
+ }
+
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to set vCPU(%u) to pCPU "
+ "mask(0x%"PRIx64") for VM '%s', VM is not active\n",
+ vcpu, core_mask, vm_info->name);
+ return -1;
+ }
+
+ if (vcpu >= vm_info->info.nrVirtCpu) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "vCPU(%u) exceeds the assigned number of "
+ "vCPUs(%u)\n", vcpu, vm_info->info.nrVirtCpu);
+ return -1;
+ }
+ memset(global_cpumaps, 0 , CHANNEL_CMDS_MAX_CPUS * global_maplen);
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ VIR_USE_CPU(global_cpumaps, i);
+ if (i >= global_n_host_cpus) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "CPU(%u) exceeds the available "
+ "number of CPUs(%u)\n", i, global_n_host_cpus);
+ return -1;
+ }
+ }
+ if (virDomainPinVcpuFlags(vm_info->domainPtr, vcpu, global_cpumaps,
+ global_maplen, flags) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to set vCPU(%u) to pCPU "
+ "mask(0x%"PRIx64") for VM '%s'\n", vcpu, core_mask,
+ vm_info->name);
+ return -1;
+ }
+ rte_atomic64_set(&vm_info->pcpu_mask[vcpu], core_mask);
+ return 0;
+
+}
+
+int
+set_pcpu(char *vm_name, unsigned vcpu, unsigned core_num)
+{
+ uint64_t mask = 1ULL << core_num;
+ return set_pcpus_mask(vm_name, vcpu, mask);
+}
+
+uint64_t
+get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu)
+{
+ struct virtual_machine_info *vm_info =
+ (struct virtual_machine_info *)chan_info->priv_info;
+ return rte_atomic64_read(&vm_info->pcpu_mask[vcpu]);
+}
+
+static inline int
+channel_exists(struct virtual_machine_info *vm_info, unsigned channel_num)
+{
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ if (vm_info->channel_mask & (1ULL << channel_num)) {
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 1;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+
+
+static int
+open_non_blocking_channel(struct channel_info *info)
+{
+ int ret, flags;
+ struct sockaddr_un sock_addr;
+ fd_set soc_fd_set;
+ struct timeval tv;
+
+ info->fd = socket(AF_UNIX, SOCK_STREAM, 0);
+ if (info->fd == -1) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error(%s) creating socket for '%s'\n",
+ strerror(errno),
+ info->channel_path);
+ return -1;
+ }
+ sock_addr.sun_family = AF_UNIX;
+ memcpy(&sock_addr.sun_path, info->channel_path,
+ strlen(info->channel_path)+1);
+
+ /* Get current flags */
+ flags = fcntl(info->fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) fcntl get flags socket for"
+ "'%s'\n", strerror(errno), info->channel_path);
+ return 1;
+ }
+ /* Set to Non Blocking */
+ flags |= O_NONBLOCK;
+ if (fcntl(info->fd, F_SETFL, flags) < 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) setting non-blocking "
+ "socket for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ ret = connect(info->fd, (struct sockaddr *)&sock_addr,
+ sizeof(sock_addr));
+ if (ret < 0) {
+ /* ECONNREFUSED error is given when VM is not active */
+ if (errno == ECONNREFUSED) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "VM is not active or has not "
+ "activated its endpoint to channel %s\n",
+ info->channel_path);
+ return -1;
+ }
+ /* Wait for tv_sec if in progress */
+ else if (errno == EINPROGRESS) {
+ tv.tv_sec = 2;
+ tv.tv_usec = 0;
+ FD_ZERO(&soc_fd_set);
+ FD_SET(info->fd, &soc_fd_set);
+ if (select(info->fd+1, NULL, &soc_fd_set, NULL, &tv) > 0) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Timeout or error on channel "
+ "'%s'\n", info->channel_path);
+ return -1;
+ }
+ } else {
+ /* Any other error */
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Error(%s) connecting socket"
+ " for '%s'\n", strerror(errno), info->channel_path);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int
+setup_channel_info(struct virtual_machine_info **vm_info_dptr,
+ struct channel_info **chan_info_dptr, unsigned channel_num)
+{
+ struct channel_info *chan_info = *chan_info_dptr;
+ struct virtual_machine_info *vm_info = *vm_info_dptr;
+
+ chan_info->channel_num = channel_num;
+ chan_info->priv_info = (void *)vm_info;
+ chan_info->status = CHANNEL_MGR_CHANNEL_DISCONNECTED;
+ if (open_non_blocking_channel(chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could not open channel: "
+ "'%s' for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+ }
+ if (add_channel_to_monitor(&chan_info) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Could add channel: "
+ "'%s' to epoll ctl for VM '%s'\n",
+ chan_info->channel_path, vm_info->name);
+ return -1;
+
+ }
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->num_channels++;
+ vm_info->channel_mask |= 1ULL << channel_num;
+ vm_info->channels[channel_num] = chan_info;
+ chan_info->status = CHANNEL_MGR_CHANNEL_CONNECTED;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return 0;
+}
+
+int
+add_all_channels(const char *vm_name)
+{
+ DIR *d;
+ struct dirent *dir;
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char *token, *remaining, *tail_ptr;
+ char socket_name[PATH_MAX];
+ unsigned channel_num;
+ int num_channels_enabled = 0;
+
+ /* verify VM exists */
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' not found"
+ " during channel discovery\n", vm_name);
+ return 0;
+ }
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = CHANNEL_MGR_VM_INACTIVE;
+ return 0;
+ }
+ d = opendir(CHANNEL_MGR_SOCKET_PATH);
+ if (d == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error opening directory '%s': %s\n",
+ CHANNEL_MGR_SOCKET_PATH, strerror(errno));
+ return -1;
+ }
+ while ((dir = readdir(d)) != NULL) {
+ if (!strncmp(dir->d_name, ".", 1) ||
+ !strncmp(dir->d_name, "..", 2))
+ continue;
+
+ snprintf(socket_name, sizeof(socket_name), "%s", dir->d_name);
+ remaining = socket_name;
+ /* Extract vm_name from "<vm_name>.<channel_num>" */
+ token = strsep(&remaining, ".");
+ if (remaining == NULL)
+ continue;
+ if (strncmp(vm_name, token, CHANNEL_MGR_MAX_NAME_LEN))
+ continue;
+
+ /* remaining should contain only <channel_num> */
+ errno = 0;
+ channel_num = (unsigned)strtol(remaining, &tail_ptr, 0);
+ if ((errno != 0) || (remaining[0] == '\0') ||
+ (*tail_ptr != '\0') || tail_ptr == NULL) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Malformed channel name"
+ "'%s' found it should be in the form of "
+ "'<guest_name>.<channel_num>(decimal)'\n",
+ dir->d_name);
+ continue;
+ }
+ if (channel_num >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(WARNING, CHANNEL_MANAGER, "Channel number(%u) is "
+ "greater than max allowable: %d, skipping '%s%s'\n",
+ channel_num, CHANNEL_CMDS_MAX_VM_CHANNELS-1,
+ CHANNEL_MGR_SOCKET_PATH, dir->d_name);
+ continue;
+ }
+ /* if channel has not been added previously */
+ if (channel_exists(vm_info, channel_num))
+ continue;
+
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s%s'\n", CHANNEL_MGR_SOCKET_PATH, dir->d_name);
+ continue;
+ }
+
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s",
+ CHANNEL_MGR_SOCKET_PATH, dir->d_name);
+
+ if (setup_channel_info(&vm_info, &chan_info, channel_num) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+
+ num_channels_enabled++;
+ }
+ closedir(d);
+ return num_channels_enabled;
+}
+
+int
+add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list)
+{
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info;
+ char socket_path[PATH_MAX];
+ unsigned i;
+ int num_channels_enabled = 0;
+
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+
+ if (!virDomainIsActive(vm_info->domainPtr)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM: '%s' is not active\n", vm_name);
+ vm_info->status = CHANNEL_MGR_VM_INACTIVE;
+ return 0;
+ }
+
+ for (i = 0; i < len_channel_list; i++) {
+
+ if (channel_list[i] >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Channel(%u) is out of range "
+ "0...%d\n", channel_list[i],
+ CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+ continue;
+ }
+ if (channel_exists(vm_info, channel_list[i])) {
+ RTE_LOG(INFO, CHANNEL_MANAGER, "Channel already exists, skipping "
+ "'%s.%u'\n", vm_name, i);
+ continue;
+ }
+
+ snprintf(socket_path, sizeof(socket_path), "%s%s.%u",
+ CHANNEL_MGR_SOCKET_PATH, vm_name, channel_list[i]);
+ errno = 0;
+ if (access(socket_path, F_OK) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channel path '%s' error: "
+ "%s\n", socket_path, strerror(errno));
+ continue;
+ }
+ chan_info = rte_malloc(NULL, sizeof(*chan_info),
+ CACHE_LINE_SIZE);
+ if (chan_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for "
+ "channel '%s'\n", socket_path);
+ continue;
+ }
+ snprintf(chan_info->channel_path,
+ sizeof(chan_info->channel_path), "%s%s.%u",
+ CHANNEL_MGR_SOCKET_PATH, vm_name, channel_list[i]);
+ if (setup_channel_info(&vm_info, &chan_info, channel_list[i]) < 0) {
+ rte_free(chan_info);
+ continue;
+ }
+ num_channels_enabled++;
+
+ }
+ return num_channels_enabled;
+}
+
+int
+remove_channel(struct channel_info **chan_info_dptr)
+{
+ struct virtual_machine_info *vm_info;
+ struct channel_info *chan_info = *chan_info_dptr;
+
+ close(chan_info->fd);
+
+ vm_info = (struct virtual_machine_info *)chan_info->priv_info;
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channel_mask &= ~(1ULL << chan_info->channel_num);
+ vm_info->num_channels--;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ rte_free(chan_info);
+ return 0;
+}
+
+int
+set_channel_status_all(const char *vm_name, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i;
+ uint64_t mask;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_MGR_CHANNEL_CONNECTED ||
+ status == CHANNEL_MGR_CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to disable channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ vm_info->channels[i]->status = status;
+ num_channels_changed++;
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ return num_channels_changed;
+
+}
+
+int
+set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i;
+ int num_channels_changed = 0;
+
+ if (!(status == CHANNEL_MGR_CHANNEL_CONNECTED ||
+ status == CHANNEL_MGR_CHANNEL_DISABLED)) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Channels can only be enabled or "
+ "disabled: Unable to change status for VM '%s'\n", vm_name);
+ }
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add channels: VM '%s' "
+ "not found\n", vm_name);
+ return 0;
+ }
+ for (i = 0; i < len_channel_list; i++) {
+ if (channel_exists(vm_info, channel_list[i])) {
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+ vm_info->channels[channel_list[i]]->status = status;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+ num_channels_changed++;
+ }
+ }
+ return num_channels_changed;
+}
+
+int
+get_info_vm(const char *vm_name, struct vm_info *info)
+{
+ struct virtual_machine_info *vm_info;
+ unsigned i, channel_num = 0;
+ uint64_t mask;
+ vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+ info->status = CHANNEL_MGR_VM_ACTIVE;
+ if (!virDomainIsActive(vm_info->domainPtr))
+ info->status = CHANNEL_MGR_VM_INACTIVE;
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ info->channels[channel_num].channel_num = i;
+ memcpy(info->channels[channel_num].channel_path,
+ vm_info->channels[i]->channel_path, PATH_MAX);
+ info->channels[channel_num].status = vm_info->channels[i]->status;
+ info->channels[channel_num].fd = vm_info->channels[i]->fd;
+ channel_num++;
+ }
+
+ info->num_channels = channel_num;
+ info->num_vcpus = vm_info->info.nrVirtCpu;
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ memcpy(info->name, vm_info->name, sizeof(vm_info->name));
+ for (i = 0; i < info->num_vcpus; i++) {
+ info->pcpu_mask[i] = rte_atomic64_read(&vm_info->pcpu_mask[i]);
+ }
+ return 0;
+}
+
+int
+add_vm(const char *vm_name)
+{
+ struct virtual_machine_info *new_domain;
+ virDomainPtr dom_ptr;
+ int i;
+
+ if (find_domain_by_name(vm_name) != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to add VM: VM '%s' "
+ "already exists\n", vm_name);
+ return -1;
+ }
+
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "No connection to hypervisor exists\n");
+ return -1;
+ }
+ dom_ptr = virDomainLookupByName(global_vir_conn_ptr, vm_name);
+ if (dom_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error on VM lookup with libvirt: "
+ "VM '%s' not found\n", vm_name);
+ return -1;
+ }
+
+ new_domain = rte_malloc("virtual_machine_info", sizeof(*new_domain),
+ CACHE_LINE_SIZE);
+ if (new_domain == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to allocate memory for VM "
+ "info\n");
+ return -1;
+ }
+ new_domain->domainPtr = dom_ptr;
+ if (virDomainGetInfo(new_domain->domainPtr, &new_domain->info) != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to get libvirt VM info\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ if (new_domain->info.nrVirtCpu > CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error the number of virtual CPUs(%u) is "
+ "greater than allowable(%d)\n", new_domain->info.nrVirtCpu,
+ CHANNEL_CMDS_MAX_CPUS);
+ rte_free(new_domain);
+ return -1;
+ }
+
+ for (i = 0; i < CHANNEL_CMDS_MAX_CPUS; i++) {
+ rte_atomic64_init(&new_domain->pcpu_mask[i]);
+ }
+ if (update_pcpus_mask(new_domain) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error getting physical CPU pinning\n");
+ rte_free(new_domain);
+ return -1;
+ }
+ strncpy(new_domain->name, vm_name, sizeof(new_domain->name));
+ new_domain->channel_mask = 0;
+ new_domain->num_channels = 0;
+
+ if (!virDomainIsActive(dom_ptr))
+ new_domain->status = CHANNEL_MGR_VM_INACTIVE;
+ else
+ new_domain->status = CHANNEL_MGR_VM_ACTIVE;
+
+ rte_spinlock_init(&(new_domain->config_spinlock));
+ LIST_INSERT_HEAD(&vm_list_head, new_domain, vms_info);
+ return 0;
+}
+
+int
+remove_vm(const char *vm_name)
+{
+ struct virtual_machine_info *vm_info = find_domain_by_name(vm_name);
+ if (vm_info == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM: VM '%s' "
+ "not found\n", vm_name);
+ return -1;
+ }
+ rte_spinlock_lock(&vm_info->config_spinlock);
+ if (vm_info->num_channels != 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to remove VM '%s', there are "
+ "%"PRId8" channels still active\n",
+ vm_name, vm_info->num_channels);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ return -1;
+ }
+ LIST_REMOVE(vm_info, vms_info);
+ rte_spinlock_unlock(&vm_info->config_spinlock);
+ rte_free(vm_info);
+ return 0;
+}
+
+static void
+disconnect_hypervisor(void)
+{
+ if (global_vir_conn_ptr != NULL) {
+ virConnectClose(global_vir_conn_ptr);
+ global_vir_conn_ptr = NULL;
+ }
+}
+
+static int
+connect_hypervisor(const char *path)
+{
+ if (global_vir_conn_ptr != NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error connecting to %s, connection"
+ "already established\n", path);
+ return -1;
+ }
+ global_vir_conn_ptr = virConnectOpen(path);
+ if (global_vir_conn_ptr == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error failed to open connection to "
+ "Hypervisor '%s'\n", path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+channel_manager_init(const char *path)
+{
+ int n_cpus;
+ LIST_INIT(&vm_list_head);
+ if (connect_hypervisor(path) < 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to initialize channel manager\n");
+ return -1;
+ }
+
+ global_maplen = VIR_CPU_MAPLEN(CHANNEL_CMDS_MAX_CPUS);
+
+ global_vircpuinfo = rte_zmalloc(NULL, sizeof(*global_vircpuinfo) *
+ CHANNEL_CMDS_MAX_CPUS, CACHE_LINE_SIZE);
+ if (global_vircpuinfo == NULL) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Error allocating memory for CPU Info\n");
+ goto error;
+ }
+ global_cpumaps = rte_zmalloc(NULL, CHANNEL_CMDS_MAX_CPUS * global_maplen,
+ CACHE_LINE_SIZE);
+ if (global_cpumaps == NULL) {
+ goto error;
+ }
+
+ n_cpus = virNodeGetCPUMap(global_vir_conn_ptr, NULL, NULL, 0);
+ if (n_cpus <= 0) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "Unable to get the number of Host "
+ "CPUs\n");
+ goto error;
+ }
+ global_n_host_cpus = (unsigned)n_cpus;
+
+ if (global_n_host_cpus > CHANNEL_CMDS_MAX_CPUS) {
+ RTE_LOG(ERR, CHANNEL_MANAGER, "The number of host CPUs(%u) exceeds the "
+ "maximum of %u\n", global_n_host_cpus, CHANNEL_CMDS_MAX_CPUS);
+ goto error;
+
+ }
+
+ return 0;
+error:
+ disconnect_hypervisor();
+ return -1;
+}
+
+void
+channel_manager_exit(void)
+{
+ unsigned i;
+ uint64_t mask;
+ struct virtual_machine_info *vm_info;
+
+ LIST_FOREACH(vm_info, &vm_list_head, vms_info) {
+
+ rte_spinlock_lock(&(vm_info->config_spinlock));
+
+ mask = vm_info->channel_mask;
+ ITERATIVE_BITMASK_CHECK_64(mask, i) {
+ remove_channel_from_monitor(vm_info->channels[i]);
+ close(vm_info->channels[i]->fd);
+ rte_free(vm_info->channels[i]);
+ }
+ rte_spinlock_unlock(&(vm_info->config_spinlock));
+
+ LIST_REMOVE(vm_info, vms_info);
+ rte_free(vm_info);
+ }
+
+ if (global_cpumaps != NULL)
+ rte_free(global_cpumaps);
+ if (global_vircpuinfo != NULL)
+ rte_free(global_vircpuinfo);
+ disconnect_hypervisor();
+}
diff --git a/examples/vm_power_manager/channel_manager.h b/examples/vm_power_manager/channel_manager.h
new file mode 100644
index 0000000..12c29c3
--- /dev/null
+++ b/examples/vm_power_manager/channel_manager.h
@@ -0,0 +1,314 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MANAGER_H_
+#define CHANNEL_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <linux/limits.h>
+#include <rte_atomic.h>
+#include "channel_commands.h"
+
+/* Maximum name length including '\0' terminator */
+#define CHANNEL_MGR_MAX_NAME_LEN 64
+
+/* Maximum number of channels to each Virtual Machine */
+#define CHANNEL_MGR_MAX_CHANNELS 64
+
+/* Hypervisor Path for libvirt(qemu/KVM) */
+#define CHANNEL_MGR_DEFAULT_HV_PATH "qemu:///system"
+
+/* File socket directory */
+#define CHANNEL_MGR_SOCKET_PATH "/tmp/powermonitor/"
+
+/* Communication Channel Status */
+enum channel_status { CHANNEL_MGR_CHANNEL_DISCONNECTED = 0,
+ CHANNEL_MGR_CHANNEL_CONNECTED,
+ CHANNEL_MGR_CHANNEL_DISABLED,
+ CHANNEL_MGR_CHANNEL_PROCESSING};
+
+/* VM libvirt(qemu/KVM) connection status */
+enum vm_status { CHANNEL_MGR_VM_INACTIVE = 0, CHANNEL_MGR_VM_ACTIVE};
+
+/*
+ * Represents a single and exclusive VM channel that exists between a guest and
+ * the host.
+ */
+struct channel_info {
+ char channel_path[PATH_MAX]; /**< Path to host socket */
+ volatile uint32_t status; /**< Connection status(enum channel_status) */
+ int fd; /**< AF_UNIX socket fd */
+ unsigned channel_num; /**< CHANNEL_MGR_SOCKET_PATH/<vm_name>.channel_num */
+ void *priv_info; /**< Pointer to private info, do not modify */
+};
+
+/* Represents a single VM instance used to return internal information about
+ * a VM */
+struct vm_info {
+ char name[CHANNEL_MGR_MAX_NAME_LEN]; /**< VM name */
+ enum vm_status status; /**< libvirt status */
+ uint64_t pcpu_mask[CHANNEL_CMDS_MAX_CPUS]; /**< pCPU mask for each vCPU */
+ unsigned num_vcpus; /**< number of vCPUS */
+ struct channel_info channels[CHANNEL_MGR_MAX_CHANNELS]; /**< Array of channel_info */
+ unsigned num_channels; /**< Number of channels */
+};
+
+/**
+ * Initialize the Channel Manager resources and connect to the Hypervisor
+ * specified in path.
+ * This must be successfully called first before calling any other functions.
+ * It must only be call once;
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_manager_init(const char *path);
+
+/**
+ * Free resources associated with the Channel Manager.
+ *
+ * @param path
+ * Must be a local path, e.g. qemu:///system.
+ *
+ * @return
+ * None
+ */
+void channel_manager_exit(void);
+
+/**
+ * Get the Physical CPU mask for VM lcore channel(vcpu), result is assigned to
+ * core_mask.
+ * It is not thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info
+ *
+ * @param vcpu
+ * The virtual CPU to query.
+ *
+ *
+ * @return
+ * - 0 on error.
+ * - >0 on success.
+ */
+uint64_t get_pcpus_mask(struct channel_info *chan_info, unsigned vcpu);
+
+/**
+ * Set the Physical CPU mask for the specified vCPU.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup
+ *
+ * @param vcpu
+ * The virtual CPU to set.
+ *
+ * @param core_mask
+ * The core mask of the physical CPU(s) to bind the vCPU
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int set_pcpus_mask(char *vm_name, unsigned vcpu, uint64_t core_mask);
+
+/**
+ * Set the Physical CPU for the specified vCPU.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup
+ *
+ * @param vcpu
+ * The virtual CPU to set.
+ *
+ * @param core_num
+ * The core number of the physical CPU(s) to bind the vCPU
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int set_pcpu(char *vm_name, unsigned vcpu, unsigned core_num);
+/**
+ * Add a VM as specified by name to the Channel Manager. The name must
+ * correspond to a valid libvirt domain name.
+ * This is required prior to adding channels.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_vm(const char *name);
+
+/**
+ * Remove a previously added Virtual Machine from the Channel Manager
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_vm(const char *name);
+
+/**
+ * Add all available channels to the VM as specified by name.
+ * Channels in the form of paths
+ * (CHANNEL_MGR_SOCKET_PATH/<vm_name>.<channel_number>) will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to lookup.
+ *
+ * @return
+ * - N the number of channels added for the VM
+ */
+int add_all_channels(const char *vm_name);
+
+/**
+ * Add the channel numbers in channel_list to the domain specified by name.
+ * Channels in the form of paths
+ * (CHANNEL_MGR_SOCKET_PATH/<vm_name>.<channel_number>) will only be parsed.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel number to add
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int add_channels(const char *vm_name, unsigned *channel_list,
+ unsigned num_channels);
+
+/**
+ * Remove a channel definition from the channel manager. This must only be
+ * called from the channel monitor thread.
+ *
+ * @param chan_info
+ * Pointer to a valid struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel(struct channel_info **chan_info_dptr);
+
+/**
+ * For all channels associated with a Virtual Machine name, update the
+ * connection status. Valid states are CHANNEL_MGR_CHANNEL_CONNECTED or
+ * CHANNEL_MGR_CHANNEL_DISABLED only.
+ *
+ *
+ * @param name
+ * Virtual Machine name to modify all channels.
+ *
+ * @param status
+ * The status to set each channel
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels added for the VM
+ * - 0 for error
+ */
+int set_channel_status_all(const char *name, enum channel_status status);
+
+/**
+ * For all channels in channel_list associated with a Virtual Machine name
+ * update the connection status of each.
+ * Valid states are CHANNEL_MGR_CHANNEL_CONNECTED or
+ * CHANNEL_MGR_CHANNEL_DISABLED only.
+ * It is not thread-safe.
+ *
+ * @param name
+ * Virtual Machine name to add channels.
+ *
+ * @param channel_list
+ * Pointer to list of unsigned integers, representing the channel numbers to
+ * modify.
+ * It must be allocated outside of this function.
+ *
+ * @param num_channels
+ * The amount of channel numbers in channel_list
+ *
+ * @return
+ * - N the number of channels modified for the VM
+ * - 0 for error
+ */
+int set_channel_status(const char *vm_name, unsigned *channel_list,
+ unsigned len_channel_list, enum channel_status status);
+
+/**
+ * Populates a pointer to struct vm_info associated with vm_name.
+ *
+ * @param vm_name
+ * The name of the virtual machine to lookup.
+ *
+ * @param vm_info
+ * Pointer to a struct vm_info, this must be allocated prior to calling this
+ * function.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int get_info_vm(const char *vm_name, struct vm_info *info);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_MANAGER_H_ */
diff --git a/examples/vm_power_manager/channel_monitor.c b/examples/vm_power_manager/channel_monitor.c
new file mode 100644
index 0000000..3674c7c
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.c
@@ -0,0 +1,231 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <signal.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/epoll.h>
+#include <sys/queue.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_malloc.h>
+#include <rte_atomic.h>
+
+
+#include "channel_monitor.h"
+#include "channel_commands.h"
+#include "channel_manager.h"
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_CHANNEL_MONITOR RTE_LOGTYPE_USER1
+
+#define MAX_EVENTS 256
+
+
+static volatile unsigned run_loop = 1;
+static int global_event_fd;
+static struct epoll_event *global_events_list;
+
+void channel_monitor_exit(void)
+{
+ run_loop = 0;
+ rte_free(global_events_list);
+}
+
+static int
+process_request(struct channel_packet *pkt, struct channel_info *chan_info)
+{
+ uint64_t core_mask;
+
+ if (chan_info == NULL)
+ return -1;
+
+ if (rte_atomic32_cmpset(&(chan_info->status), CHANNEL_MGR_CHANNEL_CONNECTED,
+ CHANNEL_MGR_CHANNEL_PROCESSING) == 0)
+ return -1;
+
+ if (pkt->command == CPU_POWER) {
+ core_mask = get_pcpus_mask(chan_info, pkt->resource_id);
+ if (core_mask == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error get physical CPU mask for "
+ "channel '%s' using vCPU(%u)\n", chan_info->channel_path,
+ (unsigned)pkt->unit);
+ return -1;
+ }
+ if (__builtin_popcountll(core_mask) == 1) {
+
+ unsigned core_num = __builtin_ffsll(core_mask) - 1;
+
+ switch (pkt->unit) {
+ case(CPU_POWER_SCALE_MIN):
+ power_manager_scale_core_min(core_num);
+ break;
+ case(CPU_POWER_SCALE_MAX):
+ power_manager_scale_core_max(core_num);
+ break;
+ case(CPU_POWER_SCALE_DOWN):
+ power_manager_scale_core_down(core_num);
+ break;
+ case(CPU_POWER_SCALE_UP):
+ power_manager_scale_core_up(core_num);
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (pkt->unit) {
+ case(CPU_POWER_SCALE_MIN):
+ power_manager_scale_mask_min(core_mask);
+ break;
+ case(CPU_POWER_SCALE_MAX):
+ power_manager_scale_mask_max(core_mask);
+ break;
+ case(CPU_POWER_SCALE_DOWN):
+ power_manager_scale_mask_down(core_mask);
+ break;
+ case(CPU_POWER_SCALE_UP):
+ power_manager_scale_mask_up(core_mask);
+ break;
+ default:
+ break;
+ }
+
+ }
+ }
+ /* Return is not checked as channel status may have been set to DISABLED
+ * from management thread
+ */
+ rte_atomic32_cmpset(&(chan_info->status), CHANNEL_MGR_CHANNEL_PROCESSING,
+ CHANNEL_MGR_CHANNEL_CONNECTED);
+ return 0;
+
+}
+
+int
+add_channel_to_monitor(struct channel_info **chan_info)
+{
+ struct channel_info *info = *chan_info;
+ struct epoll_event event;
+ event.events = EPOLLIN;
+ event.data.ptr = info;
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_ADD, info->fd, &event) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to add channel '%s' "
+ "to epoll\n", info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+remove_channel_from_monitor(struct channel_info *chan_info)
+{
+ if (epoll_ctl(global_event_fd, EPOLL_CTL_DEL, chan_info->fd, NULL) < 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to remove channel '%s' "
+ "from epoll\n", chan_info->channel_path);
+ return -1;
+ }
+ return 0;
+}
+
+int
+channel_monitor_init(void)
+{
+ global_event_fd = epoll_create1(0);
+ if (global_event_fd == 0) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Error creating epoll context with "
+ "error %s\n", strerror(errno));
+ return -1;
+ }
+ global_events_list = rte_malloc("epoll_events", sizeof(*global_events_list)
+ * MAX_EVENTS, CACHE_LINE_SIZE);
+ if (global_events_list == NULL) {
+ RTE_LOG(ERR, CHANNEL_MONITOR, "Unable to rte_malloc for"
+ "epoll events\n");
+ return -1;
+ }
+ return 0;
+}
+
+void
+run_channel_monitor(void)
+{
+ while (run_loop) {
+ int n_events, i;
+ n_events = epoll_wait(global_event_fd, global_events_list,
+ MAX_EVENTS, 1);
+ if (!run_loop)
+ break;
+ for (i = 0; i < n_events; i++) {
+ struct channel_info *chan_info = (struct channel_info *)
+ global_events_list[i].data.ptr;
+ if ((global_events_list[i].events & EPOLLERR) ||
+ (global_events_list[i].events & EPOLLHUP)) {
+ RTE_LOG(DEBUG, CHANNEL_MONITOR, "Remote closed connection for "
+ "channel '%s'\n", chan_info->channel_path);
+ remove_channel(&chan_info);
+ continue;
+ }
+ if (global_events_list[i].events & EPOLLIN) {
+
+ int n_bytes, err = 0;
+ struct channel_packet pkt;
+ void *buffer = &pkt;
+ int buffer_len = sizeof(pkt);
+ while (buffer_len > 0) {
+ n_bytes = read(chan_info->fd, buffer, buffer_len);
+ if (n_bytes == buffer_len)
+ break;
+ if (n_bytes == -1) {
+ err = errno;
+ RTE_LOG(DEBUG, CHANNEL_MONITOR, "Received error on "
+ "channel '%s' read: %s\n",
+ chan_info->channel_path, strerror(err));
+ remove_channel(&chan_info);
+ break;
+ }
+ buffer = (char *)buffer + n_bytes;
+ buffer_len -= n_bytes;
+ }
+ if (!err)
+ process_request(&pkt, chan_info);
+ }
+ }
+ }
+}
diff --git a/examples/vm_power_manager/channel_monitor.h b/examples/vm_power_manager/channel_monitor.h
new file mode 100644
index 0000000..c138607
--- /dev/null
+++ b/examples/vm_power_manager/channel_monitor.h
@@ -0,0 +1,102 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_MONITOR_H_
+#define CHANNEL_MONITOR_H_
+
+#include "channel_manager.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Setup the Channel Monitor resources required to initialize epoll.
+ * Must be called first before calling other functions.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int channel_monitor_init(void);
+
+/**
+ * Run the channel monitor, loops forever on on epoll_wait.
+ *
+ *
+ * @return
+ * None
+ */
+void run_channel_monitor(void);
+
+/**
+ * Exit the Channel Monitor, exiting the epoll_wait loop and events processing.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+void channel_monitor_exit(void);
+
+/**
+ * Add an open channel to monitor via epoll. A pointer to struct channel_info
+ * will be registered with epoll for event processing.
+ * It is thread-safe.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info pointer.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int add_channel_to_monitor(struct channel_info **chan_info);
+
+/**
+ * Remove a previously added channel from epoll control.
+ *
+ * @param chan_info
+ * Pointer to struct channel_info.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int remove_channel_from_monitor(struct channel_info *chan_info);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* CHANNEL_MONITOR_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 02/10] VM Power Management CLI(Host).
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 03/10] CPU Frequency Power Management(Host) Alan Carew
` (10 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
The CLI is used for administrating the channel monitor and manager and
manually setting the CPU frequency on the host.
Supports the following commands:
add_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
rm_vm [Mul-choice STRING]: add_vm|rm_vm <name>, add a VM for subsequent
operations with the CLI or remove a previously added VM from the VM Power
Manager
add_channels [Fixed STRING]: add_channels <vm_name> <list>|all, add
communication channels for the specified VM, the virtio channels must be
enabled in the VM configuration(qemu/libvirt) and the associated VM must be
active. <list> is a comma-separated list of channel numbers to add, using the
keyword 'all' will attempt to add all channels for the VM
set_channel_status [Fixed STRING]:
set_channel_status <vm_name> <list>|all enabled|disabled, enable or disable
the communication channels in list(comma-seperated) for the specified VM,
alternatively list can be replaced with keyword 'all'. Disabled channels will
still receive packets on the host, however the commands they specify will be
ignored. Set status to 'enabled' to begin processing requests again.
show_vm [Fixed STRING]: show_vm <vm_name>, prints the information on the
specified VM(s), the information lists the number of vCPUS, the pinning to
pCPU(s) as a bit mask, along with any communication channels associated with
each VM
show_cpu_freq_mask [Fixed STRING]: show_cpu_freq_mask <mask>, Get the current
frequency for each core specified in the mask
set_cpu_freq_mask [Fixed STRING]: set_cpu_freq <core_mask> <up|down|min|max>,
Set the current frequency for the cores specified in <core_mask> by scaling
each up/down/min/max.
show_cpu_freq [Fixed STRING]: Get the current frequency for the specified core
set_cpu_freq [Fixed STRING]: set_cpu_freq <core_num> <up|down|min|max>,
Set the current frequency for the specified core by scaling up/down/min/max
quit [Fixed STRING]: close the application
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/vm_power_cli.c | 669 +++++++++++++++++++++++++++++++
examples/vm_power_manager/vm_power_cli.h | 47 +++
2 files changed, 716 insertions(+)
create mode 100644 examples/vm_power_manager/vm_power_cli.c
create mode 100644 examples/vm_power_manager/vm_power_cli.h
diff --git a/examples/vm_power_manager/vm_power_cli.c b/examples/vm_power_manager/vm_power_cli.c
new file mode 100644
index 0000000..e162e88
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.c
@@ -0,0 +1,669 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdio.h>
+#include <string.h>
+#include <termios.h>
+#include <errno.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+
+#include "vm_power_cli.h"
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "channel_commands.h"
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+struct cmd_show_vm_result {
+ cmdline_fixed_string_t show_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_show_vm_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_vm_result *res = parsed_result;
+ struct vm_info info;
+ unsigned i;
+
+ if (get_info_vm(res->vm_name, &info) != 0)
+ return;
+ cmdline_printf(cl, "VM: '%s', status = ", info.name);
+ if (info.status == CHANNEL_MGR_VM_ACTIVE)
+ cmdline_printf(cl, "ACTIVE\n");
+ else
+ cmdline_printf(cl, "INACTIVE\n");
+ cmdline_printf(cl, "Channels %u\n", info.num_channels);
+ for (i = 0; i < info.num_channels; i++) {
+ cmdline_printf(cl, " [%u]: %s, status = ", i,
+ info.channels[i].channel_path);
+ switch (info.channels[i].status) {
+ case CHANNEL_MGR_CHANNEL_CONNECTED:
+ cmdline_printf(cl, "CONNECTED\n");
+ break;
+ case CHANNEL_MGR_CHANNEL_DISCONNECTED:
+ cmdline_printf(cl, "DISCONNECTED\n");
+ break;
+ case CHANNEL_MGR_CHANNEL_DISABLED:
+ cmdline_printf(cl, "DISABLED\n");
+ break;
+ case CHANNEL_MGR_CHANNEL_PROCESSING:
+ cmdline_printf(cl, "PROCESSING\n");
+ break;
+ default:
+ cmdline_printf(cl, "UNKNOWN\n");
+ break;
+ }
+ }
+ cmdline_printf(cl, "Virtual CPU(s): %u\n", info.num_vcpus);
+ for (i = 0; i < info.num_vcpus; i++) {
+ cmdline_printf(cl, " [%u]: Physical CPU Mask 0x%"PRIx64"\n", i,
+ info.pcpu_mask[i]);
+ }
+}
+
+
+
+cmdline_parse_token_string_t cmd_vm_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ show_vm, "show_vm");
+cmdline_parse_token_string_t cmd_show_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_vm_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_show_vm_set = {
+ .f = cmd_show_vm_parsed,
+ .data = NULL,
+ .help_str = "show_vm <vm_name>, prints the information on the "
+ "specified VM(s), the information lists the number of vCPUS, the "
+ "pinning to pCPU(s) as a bit mask, along with any communication "
+ "channels associated with each VM",
+ .tokens = {
+ (void *)&cmd_vm_show,
+ (void *)&cmd_show_vm_name,
+ NULL,
+ },
+};
+
+/* *** vCPU to pCPU mapping operations *** */
+struct cmd_set_pcpu_mask_result {
+ cmdline_fixed_string_t set_pcpu_mask;
+ cmdline_fixed_string_t vm_name;
+ uint8_t vcpu;
+ uint64_t core_mask;
+};
+
+static void
+cmd_set_pcpu_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_pcpu_mask_result *res = parsed_result;
+ if (set_pcpus_mask(res->vm_name, res->vcpu, res->core_mask) == 0)
+ cmdline_printf(cl, "Pinned vCPU(%"PRId8") to pCPU core "
+ "mask(0x%"PRIx64")\n", res->vcpu, res->core_mask);
+ else
+ cmdline_printf(cl, "Unable to pin vCPU(%"PRId8") to pCPU core "
+ "mask(0x%"PRIx64")\n", res->vcpu, res->core_mask);
+}
+
+cmdline_parse_token_string_t cmd_set_pcpu_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ set_pcpu_mask, "set_pcpu_mask");
+cmdline_parse_token_string_t cmd_set_pcpu_mask_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ vm_name, NULL);
+cmdline_parse_token_num_t set_pcpu_mask_vcpu =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ vcpu, UINT8);
+cmdline_parse_token_num_t set_pcpu_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_mask_result,
+ core_mask, UINT64);
+
+
+cmdline_parse_inst_t cmd_set_pcpu_mask_set = {
+ .f = cmd_set_pcpu_mask_parsed,
+ .data = NULL,
+ .help_str = "set_pcpu_mask <vm_name> <vcpu> <pcpu>, Set the binding "
+ "of Virtual CPU on VM to the Physical CPU mask.",
+ .tokens = {
+ (void *)&cmd_set_pcpu_mask,
+ (void *)&cmd_set_pcpu_mask_vm_name,
+ (void *)&set_pcpu_mask_vcpu,
+ (void *)&set_pcpu_mask_core_mask,
+ NULL,
+ },
+};
+
+struct cmd_set_pcpu_result {
+ cmdline_fixed_string_t set_pcpu;
+ cmdline_fixed_string_t vm_name;
+ uint8_t vcpu;
+ uint8_t core;
+};
+
+static void
+cmd_set_pcpu_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_pcpu_result *res = parsed_result;
+ if (set_pcpu(res->vm_name, res->vcpu, res->core) == 0)
+ cmdline_printf(cl, "Pinned vCPU(%"PRId8") to pCPU core "
+ "%"PRId8")\n", res->vcpu, res->core);
+ else
+ cmdline_printf(cl, "Unable to pin vCPU(%"PRId8") to pCPU core "
+ "%"PRId8")\n", res->vcpu, res->core);
+}
+
+cmdline_parse_token_string_t cmd_set_pcpu =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_result,
+ set_pcpu, "set_pcpu");
+cmdline_parse_token_string_t cmd_set_pcpu_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_pcpu_result,
+ vm_name, NULL);
+cmdline_parse_token_num_t set_pcpu_vcpu =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_result,
+ vcpu, UINT8);
+cmdline_parse_token_num_t set_pcpu_core =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_pcpu_result,
+ core, UINT64);
+
+
+cmdline_parse_inst_t cmd_set_pcpu_set = {
+ .f = cmd_set_pcpu_parsed,
+ .data = NULL,
+ .help_str = "set_pcpu <vm_name> <vcpu> <pcpu>, Set the binding "
+ "of Virtual CPU on VM to the Physical CPU.",
+ .tokens = {
+ (void *)&cmd_set_pcpu,
+ (void *)&cmd_set_pcpu_vm_name,
+ (void *)&set_pcpu_vcpu,
+ (void *)&set_pcpu_core,
+ NULL,
+ },
+};
+
+struct cmd_vm_op_result {
+ cmdline_fixed_string_t op_vm;
+ cmdline_fixed_string_t vm_name;
+};
+
+static void
+cmd_vm_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_vm_op_result *res = parsed_result;
+
+ if (!strcmp(res->op_vm, "add_vm")) {
+ if (add_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to add VM '%s'\n", res->vm_name);
+ } else if (remove_vm(res->vm_name) < 0)
+ cmdline_printf(cl, "Unable to remove VM '%s'\n", res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_vm_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ op_vm, "add_vm#rm_vm");
+cmdline_parse_token_string_t cmd_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_vm_op_result,
+ vm_name, NULL);
+
+cmdline_parse_inst_t cmd_vm_op_set = {
+ .f = cmd_vm_op_parsed,
+ .data = NULL,
+ .help_str = "add_vm|rm_vm <name>, add a VM for "
+ "subsequent operations with the CLI or remove a previously added "
+ "VM from the VM Power Manager",
+ .tokens = {
+ (void *)&cmd_vm_op,
+ (void *)&cmd_vm_name,
+ NULL,
+ },
+};
+
+/* *** VM channel operations *** */
+struct cmd_channels_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+};
+static void
+cmd_channels_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num, i;
+ int channels_added;
+ unsigned channel_list[CHANNEL_CMDS_MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_op_result *res = parsed_result;
+
+ if (!strcmp(res->channel_list, "all")) {
+ channels_added = add_all_channels(res->vm_name);
+ cmdline_printf(cl, "Added %d channels for VM '%s'\n",
+ channels_added, res->vm_name);
+ return;
+ }
+
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "Channel number '%u' exceeds the maximum number "
+ "of allowable channels(%u) for VM '%s'\n", channel_num,
+ CHANNEL_CMDS_MAX_VM_CHANNELS, res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ for (i = 0; i < num_channels; i++)
+ cmdline_printf(cl, "[%u]: Adding channel %u\n", i, channel_list[i]);
+
+ channels_added = add_channels(res->vm_name, channel_list,
+ num_channels);
+ cmdline_printf(cl, "Enabled %d channels for '%s'\n", channels_added,
+ res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ op, "add_channels");
+cmdline_parse_token_string_t cmd_channels_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_op_result,
+ channel_list, NULL);
+
+cmdline_parse_inst_t cmd_channels_op_set = {
+ .f = cmd_channels_op_parsed,
+ .data = NULL,
+ .help_str = "add_channels <vm_name> <list>|all, add "
+ "communication channels for the specified VM, the "
+ "virtio channels must be enabled in the VM "
+ "configuration(qemu/libvirt) and the associated VM must be active. "
+ "<list> is a comma-seperated list of channel numbers to add, using "
+ "the keyword 'all' will attempt to add all channels for the VM",
+ .tokens = {
+ (void *)&cmd_channels_op,
+ (void *)&cmd_channels_vm_name,
+ (void *)&cmd_channels_list,
+ NULL,
+ },
+};
+
+struct cmd_channels_status_op_result {
+ cmdline_fixed_string_t op;
+ cmdline_fixed_string_t vm_name;
+ cmdline_fixed_string_t channel_list;
+ cmdline_fixed_string_t status;
+};
+
+static void
+cmd_channels_status_op_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned num_channels = 0, channel_num;
+ int changed;
+ unsigned channel_list[CHANNEL_CMDS_MAX_VM_CHANNELS];
+ char *token, *remaining, *tail_ptr;
+ struct cmd_channels_status_op_result *res = parsed_result;
+ enum channel_status status;
+
+ if (!strcmp(res->status, "enabled"))
+ status = CHANNEL_MGR_CHANNEL_CONNECTED;
+ else
+ status = CHANNEL_MGR_CHANNEL_DISABLED;
+
+ if (!strcmp(res->channel_list, "all")) {
+ changed = set_channel_status_all(res->vm_name, status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+ return;
+ }
+ remaining = res->channel_list;
+ while (1) {
+ if (remaining == NULL || remaining[0] == '\0')
+ break;
+ token = strsep(&remaining, ",");
+ if (token == NULL)
+ break;
+ errno = 0;
+ channel_num = (unsigned)strtol(token, &tail_ptr, 10);
+ if ((errno != 0) || (*tail_ptr != '\0') || tail_ptr == NULL)
+ break;
+
+ if (channel_num == CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ cmdline_printf(cl, "%u exceeds the maximum number of allowable "
+ "channels(%u) for VM '%s'\n", channel_num,
+ CHANNEL_CMDS_MAX_VM_CHANNELS, res->vm_name);
+ return;
+ }
+ channel_list[num_channels++] = channel_num;
+ }
+ changed = set_channel_status(res->vm_name, channel_list, num_channels,
+ status);
+ cmdline_printf(cl, "Updated status of %d channels "
+ "for VM '%s'\n", changed, res->vm_name);
+}
+
+cmdline_parse_token_string_t cmd_channels_status_op =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ op, "set_channel_status");
+cmdline_parse_token_string_t cmd_channels_status_vm_name =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ vm_name, NULL);
+cmdline_parse_token_string_t cmd_channels_status_list =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ channel_list, NULL);
+cmdline_parse_token_string_t cmd_channels_status =
+ TOKEN_STRING_INITIALIZER(struct cmd_channels_status_op_result,
+ status, "enabled#disabled");
+
+cmdline_parse_inst_t cmd_channels_status_op_set = {
+ .f = cmd_channels_status_op_parsed,
+ .data = NULL,
+ .help_str = "set_channel_status <vm_name> <list>|all enabled|disabled, "
+ " enable or disable the communication channels in "
+ "list(comma-seperated) for the specified VM, alternatively list can"
+ " be replaced with keyword 'all'. Disabled channels will still "
+ "receive packets on the host, however the commands they specify "
+ "will be ignored. Set status to 'enabled' to begin processing "
+ "requests again.",
+ .tokens = {
+ (void *)&cmd_channels_status_op,
+ (void *)&cmd_channels_status_vm_name,
+ (void *)&cmd_channels_status_list,
+ (void *)&cmd_channels_status,
+ NULL,
+ },
+};
+
+/* *** CPU Frequency operations *** */
+struct cmd_show_cpu_freq_mask_result {
+ cmdline_fixed_string_t show_cpu_freq_mask;
+ uint64_t core_mask;
+};
+
+static void
+cmd_show_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_mask_result *res = parsed_result;
+ unsigned i;
+ uint64_t mask = res->core_mask;
+ uint32_t freq;
+ for (i = 0; mask; mask &= ~(1ULL << i++)) {
+ if ((mask >> i) & 1) {
+ freq = power_manager_get_current_frequency(i);
+ if (freq > 0)
+ cmdline_printf(cl, "Core %u: %"PRId32"\n", i, freq);
+ }
+ }
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ show_cpu_freq_mask, "show_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_show_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_mask_result,
+ core_mask, UINT64);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_mask_set = {
+ .f = cmd_show_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "show_cpu_freq_mask <mask>, Get the current frequency for each "
+ "core specified in the mask",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq_mask,
+ (void *)&cmd_show_cpu_freq_mask_core_mask,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_mask_result {
+ cmdline_fixed_string_t set_cpu_freq_mask;
+ uint64_t core_mask;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_mask_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_set_cpu_freq_mask_result *res = parsed_result;
+ int ret = -1;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_mask_up(res->core_mask);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_mask_down(res->core_mask);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_mask_min(res->core_mask);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_mask_max(res->core_mask);
+ if (ret < 0) {
+ cmdline_printf(cl, "Error scaling core_mask(0x%"PRIx64") '%s' , not "
+ "all cores specified have been scaled\n",
+ res->core_mask, res->cmd);
+ };
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ set_cpu_freq_mask, "set_cpu_freq_mask");
+cmdline_parse_token_num_t cmd_set_cpu_freq_mask_core_mask =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ core_mask, UINT64);
+cmdline_parse_token_string_t cmd_set_cpu_freq_mask_result =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_mask_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_mask_set = {
+ .f = cmd_set_cpu_freq_mask_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_mask> <up|down|min|max>, Set the current "
+ "frequency for the cores specified in <core_mask> by scaling "
+ "each up/down/min/max.",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq_mask,
+ (void *)&cmd_set_cpu_freq_mask_core_mask,
+ (void *)&cmd_set_cpu_freq_mask_result,
+ NULL,
+ },
+};
+
+
+
+struct cmd_show_cpu_freq_result {
+ cmdline_fixed_string_t show_cpu_freq;
+ uint8_t core_num;
+};
+
+static void
+cmd_show_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_show_cpu_freq_result *res = parsed_result;
+ uint32_t curr_freq = power_manager_get_current_frequency(res->core_num);
+ if (curr_freq == 0) {
+ cmdline_printf(cl, "Unable to get frequency for core %u\n",
+ res->core_num);
+ return;
+ }
+ cmdline_printf(cl, "Core %u frequency: %"PRId32"\n", res->core_num,
+ curr_freq);
+}
+
+cmdline_parse_token_string_t cmd_show_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_show_cpu_freq_result,
+ show_cpu_freq, "show_cpu_freq");
+
+cmdline_parse_token_num_t cmd_show_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_show_cpu_freq_result,
+ core_num, UINT8);
+
+cmdline_parse_inst_t cmd_show_cpu_freq_set = {
+ .f = cmd_show_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "Get the current frequency for the specified core",
+ .tokens = {
+ (void *)&cmd_show_cpu_freq,
+ (void *)&cmd_show_cpu_freq_core_num,
+ NULL,
+ },
+};
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t core_num;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = power_manager_scale_core_up(res->core_num);
+ else if (!strcmp(res->cmd , "down"))
+ ret = power_manager_scale_core_down(res->core_num);
+ else if (!strcmp(res->cmd , "min"))
+ ret = power_manager_scale_core_min(res->core_num);
+ else if (!strcmp(res->cmd , "max"))
+ ret = power_manager_scale_core_max(res->core_num);
+ if (ret < 0) {
+ cmdline_printf(cl, "Error scaling core(%u) '%s'\n", res->core_num,
+ res->cmd);
+ }
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ core_num, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_vm_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_op_set,
+ (cmdline_parse_inst_t *)&cmd_channels_status_op_set,
+ (cmdline_parse_inst_t *)&cmd_show_vm_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_mask_set,
+ (cmdline_parse_inst_t *)&cmd_show_cpu_freq_set,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ (cmdline_parse_inst_t *)&cmd_set_pcpu_mask_set,
+ (cmdline_parse_inst_t *)&cmd_set_pcpu_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+
+ cl = cmdline_stdin_new(main_ctx, "vmpower> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/vm_power_cli.h b/examples/vm_power_manager/vm_power_cli.h
new file mode 100644
index 0000000..deccd51
--- /dev/null
+++ b/examples/vm_power_manager/vm_power_cli.h
@@ -0,0 +1,47 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 03/10] CPU Frequency Power Management(Host).
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 02/10] VM Power Management CLI(Host) Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 04/10] VM Power Management application and Makefile Alan Carew
` (9 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
A wrapper around librte_power(using ACPI cpufreq), providing locking around the
non-threadsafe library, allowing for frequency changes based on core masks and
core numbers from both the CLI thread and epoll monitor thread.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/power_manager.c | 244 ++++++++++++++++++++++++++++++
examples/vm_power_manager/power_manager.h | 188 +++++++++++++++++++++++
2 files changed, 432 insertions(+)
create mode 100644 examples/vm_power_manager/power_manager.c
create mode 100644 examples/vm_power_manager/power_manager.h
diff --git a/examples/vm_power_manager/power_manager.c b/examples/vm_power_manager/power_manager.c
new file mode 100644
index 0000000..b7b1fca
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.c
@@ -0,0 +1,244 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/types.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_power.h>
+#include <rte_spinlock.h>
+
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_POWER_MANAGER RTE_LOGTYPE_USER1
+
+#define POWER_SCALE_CORE(DIRECTION, core_num , ret) do { \
+ if (core_num >= POWER_MGR_MAX_CPUS) \
+ return -1; \
+ if (!(global_enabled_cpus & (1ULL << core_num))) \
+ return -1; \
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl); \
+ ret = rte_power_freq_##DIRECTION(core_num); \
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl); \
+} while (0)
+
+#define POWER_SCALE_MASK(DIRECTION, core_mask, ret) do { \
+ int i; \
+ for (i = 0; core_mask; core_mask &= ~(1 << i++)) { \
+ if ((core_mask >> i) & 1) { \
+ if (!(global_enabled_cpus & (1ULL << i))) \
+ continue; \
+ rte_spinlock_lock(&global_core_freq_info[i].power_sl); \
+ if (rte_power_freq_##DIRECTION(i) != 1) \
+ ret = -1; \
+ rte_spinlock_unlock(&global_core_freq_info[i].power_sl); \
+ } \
+ } \
+} while (0)
+
+struct freq_info {
+ rte_spinlock_t power_sl;
+ uint32_t freqs[RTE_MAX_LCORE_FREQS];
+ unsigned num_freqs;
+} __rte_cache_aligned;
+
+static struct freq_info global_core_freq_info[POWER_MGR_MAX_CPUS];
+
+static uint64_t global_enabled_cpus;
+
+#define SYSFS_CPU_PATH "/sys/devices/system/cpu/cpu%u/topology/core_id"
+
+static unsigned
+set_host_cpus_mask(void)
+{
+ char path[PATH_MAX];
+ unsigned i;
+ unsigned num_cpus = 0;
+ for (i = 0; i < POWER_MGR_MAX_CPUS; i++) {
+ snprintf(path, sizeof(path), SYSFS_CPU_PATH, i);
+ if (access(path, F_OK) == 0) {
+ global_enabled_cpus |= 1ULL << i;
+ num_cpus++;
+ } else
+ return num_cpus;
+ }
+ return num_cpus;
+}
+
+int
+power_manager_init(void)
+{
+ unsigned i, num_cpus;
+ uint64_t cpu_mask;
+ int ret = 0;
+
+ num_cpus = set_host_cpus_mask();
+ if (num_cpus == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to detected host CPUs, please "
+ "ensure that sufficient privileges exist to inspect sysfs\n");
+ return -1;
+ }
+ rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ cpu_mask = global_enabled_cpus;
+ for (i = 0; cpu_mask; cpu_mask &= ~(1 << i++)) {
+ if (rte_power_init(i) < 0 || rte_power_freqs(i,
+ global_core_freq_info[i].freqs,
+ RTE_MAX_LCORE_FREQS) == 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to initialize power manager "
+ "for core %u\n", i);
+ global_enabled_cpus &= ~(1 << i);
+ num_cpus--;
+ ret = -1;
+ }
+ rte_spinlock_init(&global_core_freq_info[i].power_sl);
+ }
+ RTE_LOG(INFO, POWER_MANAGER, "Detected %u host CPUs , enabled core mask:"
+ " 0x%"PRIx64"\n", num_cpus, global_enabled_cpus);
+ return ret;
+
+}
+
+uint32_t
+power_manager_get_current_frequency(unsigned core_num)
+{
+ uint32_t freq, index;
+
+ if (core_num >= POWER_MGR_MAX_CPUS) {
+ RTE_LOG(ERR, POWER_MANAGER, "Core(%u) is out of range 0...%d\n",
+ core_num, POWER_MGR_MAX_CPUS-1);
+ return -1;
+ }
+ if (!(global_enabled_cpus & (1ULL << core_num)))
+ return 0;
+
+ rte_spinlock_lock(&global_core_freq_info[core_num].power_sl);
+ index = rte_power_get_freq(core_num);
+ rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl);
+ if (index >= POWER_MGR_MAX_CPUS)
+ freq = 0;
+ else
+ freq = global_core_freq_info[core_num].freqs[index];
+
+ return freq;
+}
+
+int
+power_manager_exit(void)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for (i = 0; global_enabled_cpus; global_enabled_cpus &= ~(1 << i++)) {
+ if (rte_power_exit(i) < 0) {
+ RTE_LOG(ERR, POWER_MANAGER, "Unable to shutdown power manager "
+ "for core %u\n", i);
+ ret = -1;
+ }
+ }
+ global_enabled_cpus = 0;
+ return ret;
+}
+
+int
+power_manager_scale_mask_up(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(up, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_down(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(down, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_min(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(min, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_mask_max(uint64_t core_mask)
+{
+ int ret = 0;
+ POWER_SCALE_MASK(max, core_mask, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_up(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(up, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_down(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(down, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_min(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(min, core_num, ret);
+ return ret;
+}
+
+int
+power_manager_scale_core_max(unsigned core_num)
+{
+ int ret = 0;
+ POWER_SCALE_CORE(max, core_num, ret);
+ return ret;
+}
diff --git a/examples/vm_power_manager/power_manager.h b/examples/vm_power_manager/power_manager.h
new file mode 100644
index 0000000..1b45bab
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.h
@@ -0,0 +1,188 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef POWER_MANAGER_H_
+#define POWER_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Maximum number of CPUS to manage */
+#define POWER_MGR_MAX_CPUS 64
+/**
+ * Initialize power management.
+ * Initializes resources and verifies the number of CPUs on the system.
+ * Wraps librte_power int rte_power_init(unsigned lcore_id);
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_init(void);
+
+/**
+ * Exit power management. Must be called prior to exiting the application.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int power_manager_exit(void);
+
+/**
+ * Scale up the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_up(uint64_t core_mask);
+
+/**
+ * Scale down the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_down(uint64_t core_mask);
+
+/**
+ * Scale to the minimum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_min(uint64_t core_mask);
+
+/**
+ * Scale to the maximum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ * The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_mask_max(uint64_t core_mask);
+
+/**
+ * Scale up frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int power_manager_scale_core_up(unsigned core_num);
+
+/**
+ * Scale down frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_down(unsigned core_num);
+
+/**
+ * Scale to minimum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_min(unsigned core_num);
+
+/**
+ * Scale to maximum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ * The core number to change frequency
+ *
+ * @return
+ * - 1 on success.
+ * - 0 if frequency not changed.
+ * - Negative on error.
+ */
+int power_manager_scale_core_max(unsigned core_num);
+
+/**
+ * Get the current freuency of the core specified by core_num
+ *
+ * @param core_num
+ * The core number to get the current frequency
+ *
+ * @return
+ * - 0 on error
+ * - >0 for current frequency.
+ */
+uint32_t power_manager_get_current_frequency(unsigned core_num);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* POWER_MANAGER_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 04/10] VM Power Management application and Makefile.
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
` (2 preceding siblings ...)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 03/10] CPU Frequency Power Management(Host) Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-16 18:28 ` De Lara Guarch, Pablo
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 05/10] VM Power Management CLI(Guest) Alan Carew
` (8 subsequent siblings)
12 siblings, 1 reply; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
For launching CLI thread and Monitor thread and initialising
resources.
Requires a minimum of two lcores to run, additional cores specified by eal core
mask are not used.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/Makefile | 57 ++++++++++++++++++
examples/vm_power_manager/main.c | 117 +++++++++++++++++++++++++++++++++++++
examples/vm_power_manager/main.h | 52 +++++++++++++++++
3 files changed, 226 insertions(+)
create mode 100644 examples/vm_power_manager/Makefile
create mode 100644 examples/vm_power_manager/main.c
create mode 100644 examples/vm_power_manager/main.h
diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
new file mode 100644
index 0000000..7d6f943
--- /dev/null
+++ b/examples/vm_power_manager/Makefile
@@ -0,0 +1,57 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli.c power_manager.c channel_manager.c
+SRCS-y += channel_monitor.c
+
+CFLAGS += -O3 -lvirt -I$(RTE_SDK)/lib/librte_power/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
new file mode 100644
index 0000000..875274e
--- /dev/null
+++ b/examples/vm_power_manager/main.c
@@ -0,0 +1,117 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <errno.h>
+
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_eal.h>
+#include <rte_launch.h>
+#include <rte_log.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "channel_manager.h"
+#include "channel_monitor.h"
+#include "power_manager.h"
+#include "vm_power_cli.h"
+#include "main.h"
+
+static int
+run_monitor(__attribute__((unused)) void *arg)
+{
+ if (channel_monitor_init() < 0) {
+ printf("Unable to initialize channel monitor\n");
+ return -1;
+ }
+ run_channel_monitor();
+ return 0;
+}
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ channel_monitor_exit();
+ channel_manager_exit();
+ power_manager_exit();
+
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ lcore_id = rte_get_next_lcore(-1, 1, 0);
+ if (lcore_id == RTE_MAX_LCORE) {
+ RTE_LOG(ERR, EAL, "A minimum of two cores are required to run "
+ "application\n");
+ return 0;
+ }
+ rte_eal_remote_launch(run_monitor, NULL, lcore_id);
+
+ if (power_manager_init() < 0) {
+ printf("Unable to initialize power manager\n");
+ return -1;
+ }
+ if (channel_manager_init(CHANNEL_MGR_DEFAULT_HV_PATH) < 0) {
+ printf("Unable to initialize channel manager\n");
+ return -1;
+ }
+ run_cli(NULL);
+
+ rte_eal_mp_wait_lcore();
+ return 0;
+}
diff --git a/examples/vm_power_manager/main.h b/examples/vm_power_manager/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 05/10] VM Power Management CLI(Guest).
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
` (3 preceding siblings ...)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 04/10] VM Power Management application and Makefile Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
` (7 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
Provides a small sample application(guest_vm_power_mgr) to run on a VM.
The application is run by providing a core mask(-c) and number of memory
channels(-n). The core mask corresponds to the number of lcore channels to
attempt to open. A maximum of 64 channels per VM is allowed. The channels must
be monitored by the host.
After successful initialisation a CPU frequency command can be sent to the host
using:
set_cpu_freq <lcore_num> <up|down|min|max>.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
examples/vm_power_manager/guest_cli/Makefile | 56 ++++++++
examples/vm_power_manager/guest_cli/main.c | 87 ++++++++++++
examples/vm_power_manager/guest_cli/main.h | 52 +++++++
.../guest_cli/vm_power_cli_guest.c | 155 +++++++++++++++++++++
.../guest_cli/vm_power_cli_guest.h | 55 ++++++++
5 files changed, 405 insertions(+)
create mode 100644 examples/vm_power_manager/guest_cli/Makefile
create mode 100644 examples/vm_power_manager/guest_cli/main.c
create mode 100644 examples/vm_power_manager/guest_cli/main.h
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
create mode 100644 examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
diff --git a/examples/vm_power_manager/guest_cli/Makefile b/examples/vm_power_manager/guest_cli/Makefile
new file mode 100644
index 0000000..167a7ed
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/Makefile
@@ -0,0 +1,56 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = guest_vm_power_mgr
+
+# all source are stored in SRCS-y
+SRCS-y := main.c vm_power_cli_guest.c
+
+CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vm_power_manager/guest_cli/main.c b/examples/vm_power_manager/guest_cli/main.c
new file mode 100644
index 0000000..1e4767a
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.c
@@ -0,0 +1,87 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/epoll.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+*/
+#include <signal.h>
+
+#include <rte_lcore.h>
+#include <rte_power.h>
+#include <rte_debug.h>
+#include <rte_config.h>
+
+#include "vm_power_cli_guest.h"
+#include "main.h"
+
+static void
+sig_handler(int signo)
+{
+ printf("Received signal %d, exiting...\n", signo);
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ signal(SIGINT, sig_handler);
+ signal(SIGTERM, sig_handler);
+
+ rte_power_set_env(PM_ENV_KVM_VM);
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_init(lcore_id);
+ }
+ run_cli(NULL);
+
+ return 0;
+}
diff --git a/examples/vm_power_manager/guest_cli/main.h b/examples/vm_power_manager/guest_cli/main.h
new file mode 100644
index 0000000..7b4c3da
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/main.h
@@ -0,0 +1,52 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
+
+#ifndef MAIN_H_
+#define MAIN_H_
+
+
+
+#endif /* MAIN_H_ */
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
new file mode 100644
index 0000000..7c4af4a
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.c
@@ -0,0 +1,155 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+#include <stdint.h>
+#include <string.h>
+#include <stdio.h>
+#include <termios.h>
+
+#include <cmdline_rdline.h>
+#include <cmdline_parse.h>
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_lcore.h>
+
+#include <rte_power.h>
+
+#include "vm_power_cli_guest.h"
+
+
+#define CHANNEL_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+struct cmd_quit_result {
+ cmdline_fixed_string_t quit;
+};
+
+static void cmd_quit_parsed(__attribute__((unused)) void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ unsigned lcore_id;
+
+ RTE_LCORE_FOREACH(lcore_id) {
+ rte_power_exit(lcore_id);
+ }
+ cmdline_quit(cl);
+}
+
+cmdline_parse_token_string_t cmd_quit_quit =
+ TOKEN_STRING_INITIALIZER(struct cmd_quit_result, quit, "quit");
+
+cmdline_parse_inst_t cmd_quit = {
+ .f = cmd_quit_parsed, /* function to call */
+ .data = NULL, /* 2nd arg of func */
+ .help_str = "close the application",
+ .tokens = { /* token list, NULL terminated */
+ (void *)&cmd_quit_quit,
+ NULL,
+ },
+};
+
+/* *** VM operations *** */
+
+struct cmd_set_cpu_freq_result {
+ cmdline_fixed_string_t set_cpu_freq;
+ uint8_t lcore_id;
+ cmdline_fixed_string_t cmd;
+};
+
+static void
+cmd_set_cpu_freq_parsed(void *parsed_result, struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ int ret = -1;
+ struct cmd_set_cpu_freq_result *res = parsed_result;
+
+ if (!strcmp(res->cmd , "up"))
+ ret = rte_power_freq_up(res->lcore_id);
+ else if (!strcmp(res->cmd , "down"))
+ ret = rte_power_freq_down(res->lcore_id);
+ else if (!strcmp(res->cmd , "min"))
+ ret = rte_power_freq_min(res->lcore_id);
+ else if (!strcmp(res->cmd , "max"))
+ ret = rte_power_freq_max(res->lcore_id);
+ if (ret != 1)
+ cmdline_printf(cl, "Error sending message: %s\n", strerror(ret));
+}
+
+cmdline_parse_token_string_t cmd_set_cpu_freq =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ set_cpu_freq, "set_cpu_freq");
+cmdline_parse_token_string_t cmd_set_cpu_freq_core_num =
+ TOKEN_NUM_INITIALIZER(struct cmd_set_cpu_freq_result,
+ lcore_id, UINT8);
+cmdline_parse_token_string_t cmd_set_cpu_freq_cmd_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_set_cpu_freq_result,
+ cmd, "up#down#min#max");
+
+cmdline_parse_inst_t cmd_set_cpu_freq_set = {
+ .f = cmd_set_cpu_freq_parsed,
+ .data = NULL,
+ .help_str = "set_cpu_freq <core_num> <up|down|min|max>, Set the current "
+ "frequency for the specified core by scaling up/down/min/max",
+ .tokens = {
+ (void *)&cmd_set_cpu_freq,
+ (void *)&cmd_set_cpu_freq_core_num,
+ (void *)&cmd_set_cpu_freq_cmd_cmd,
+ NULL,
+ },
+};
+
+cmdline_parse_ctx_t main_ctx[] = {
+ (cmdline_parse_inst_t *)&cmd_quit,
+ (cmdline_parse_inst_t *)&cmd_set_cpu_freq_set,
+ NULL,
+};
+
+void
+run_cli(__attribute__((unused)) void *arg)
+{
+ struct cmdline *cl;
+ cl = cmdline_stdin_new(main_ctx, "vmpower(guest)> ");
+ if (cl == NULL)
+ return;
+
+ cmdline_interact(cl);
+ cmdline_stdin_exit(cl);
+}
diff --git a/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
new file mode 100644
index 0000000..0c4bdd5
--- /dev/null
+++ b/examples/vm_power_manager/guest_cli/vm_power_cli_guest.h
@@ -0,0 +1,55 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef VM_POWER_CLI_H_
+#define VM_POWER_CLI_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "channel_commands.h"
+
+int guest_channel_host_connect(unsigned lcore_id);
+
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+void run_cli(__attribute__((unused)) void *arg);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* VM_POWER_CLI_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 06/10] VM communication channels for VM Power Management(Guest).
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
` (4 preceding siblings ...)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 05/10] VM Power Management CLI(Guest) Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 07/10] librte_power common interface for Guest and Host Alan Carew
` (6 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
Allows for the opening of Virtio-Serial devices on a VM, where a DPDK
application can send packets to the host based monitor. The packet formatted is
specified in channel_commands.h
Each device appears as a serial device in path
/dev/virtio-ports/virtio.serial.port.<agent_type>.<lcore_num> where each lcore
in a DPDK application has exclusive to a device/channel.
Each channel is opened in non-blocking mode, after a successful open a test
packet is send to the host to ensure the host side is monitoring.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/guest_channel.c | 162 +++++++++++++++++++++++++++++++++++++++
lib/librte_power/guest_channel.h | 89 +++++++++++++++++++++
2 files changed, 251 insertions(+)
create mode 100644 lib/librte_power/guest_channel.c
create mode 100644 lib/librte_power/guest_channel.h
diff --git a/lib/librte_power/guest_channel.c b/lib/librte_power/guest_channel.c
new file mode 100644
index 0000000..2295665
--- /dev/null
+++ b/lib/librte_power/guest_channel.c
@@ -0,0 +1,162 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+#include <fcntl.h>
+#include <string.h>
+#include <errno.h>
+
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+
+#define RTE_LOGTYPE_GUEST_CHANNEL RTE_LOGTYPE_USER1
+
+static int global_fds[RTE_MAX_LCORE];
+
+int
+guest_channel_host_connect(const char *path, unsigned lcore_id)
+{
+ int flags, ret;
+ struct channel_packet pkt;
+ char fd_path[PATH_MAX];
+ int fd = -1;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+ /* check if path is already open */
+ if (global_fds[lcore_id] != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is already open with fd %d\n",
+ lcore_id, global_fds[lcore_id]);
+ return -1;
+ }
+
+ snprintf(fd_path, PATH_MAX, "%s.%u", path, lcore_id);
+ RTE_LOG(INFO, GUEST_CHANNEL, "Opening channel '%s' for lcore %u\n",
+ fd_path, lcore_id);
+ fd = open(fd_path, O_RDWR);
+ if (fd < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Unable to to connect to '%s' with error "
+ "%s\n", fd_path, strerror(errno));
+ return -1;
+ }
+
+ flags = fcntl(fd, F_GETFL, 0);
+ if (flags < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on fcntl get flags for file %s\n",
+ fd_path);
+ goto error;
+ }
+
+ flags |= O_NONBLOCK;
+ if (fcntl(fd, F_SETFL, flags) < 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Failed on setting non-blocking mode for "
+ "file %s", fd_path);
+ goto error;
+ }
+ /* QEMU needs a delay after connection */
+ sleep(1);
+
+ /* Send a test packet, this command is ignored by the host, but a successful
+ * send indicates that the host endpoint is monitoring.
+ */
+ pkt.command = CPU_POWER_CONNECT;
+ global_fds[lcore_id] = fd;
+ ret = guest_channel_send_msg(&pkt, lcore_id);
+ if (ret != 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Error on channel '%s' communications "
+ "test: %s\n", fd_path, strerror(ret));
+ goto error;
+ }
+ RTE_LOG(INFO, GUEST_CHANNEL, "Channel '%s' is now connected\n", fd_path);
+ return 0;
+error:
+ close(fd);
+ global_fds[lcore_id] = 0;
+ return -1;
+}
+
+int
+guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id)
+{
+ int ret, buffer_len = sizeof(*pkt);
+ void *buffer = pkt;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return -1;
+ }
+
+ if (global_fds[lcore_id] == 0) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel is not connected\n");
+ return -1;
+ }
+ while (buffer_len > 0) {
+ ret = write(global_fds[lcore_id], buffer, buffer_len);
+ if (ret == buffer_len)
+ return 0;
+ if (ret == -1) {
+ if (errno == EINTR)
+ continue;
+ return errno;
+ }
+ buffer = (char *)buffer + ret;
+ buffer_len -= ret;
+ }
+ return 0;
+}
+
+void
+guest_channel_host_disconnect(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, GUEST_CHANNEL, "Channel(%u) is out of range 0...%d\n",
+ lcore_id, RTE_MAX_LCORE-1);
+ return;
+ }
+ if (global_fds[lcore_id] == 0)
+ return;
+ close(global_fds[lcore_id]);
+ global_fds[lcore_id] = 0;
+}
diff --git a/lib/librte_power/guest_channel.h b/lib/librte_power/guest_channel.h
new file mode 100644
index 0000000..9e18af5
--- /dev/null
+++ b/lib/librte_power/guest_channel.h
@@ -0,0 +1,89 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _GUEST_CHANNEL_H
+#define _GUEST_CHANNEL_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <channel_commands.h>
+
+/**
+ * Connect to the Virtio-Serial VM end-point located in path. It is
+ * thread safe for unique lcore_ids. This function must be only called once from
+ * each lcore.
+ *
+ * @param path
+ * The path to the serial device on the filesystem
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int guest_channel_host_connect(const char *path, unsigned lcore_id);
+
+/**
+ * Disconnect from an already connected Virtio-Serial Endpoint.
+ *
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ */
+void guest_channel_host_disconnect(unsigned lcore_id);
+
+/**
+ * Send a message contained in pkt over the Virtio-Serial to the host endpoint.
+ *
+ * @param pkt
+ * Pointer to a populated struct guest_agent_pkt
+ *
+ * @param lcore_id
+ * lcore_id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on channel not connected.
+ * - errno on write to channel error.
+ */
+int guest_channel_send_msg(struct channel_packet *pkt, unsigned lcore_id);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 07/10] librte_power common interface for Guest and Host
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
` (5 preceding siblings ...)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
` (5 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
Moved the current librte_power implementation to rte_power_acpi_cpufreq, with
renaming of functions only.
Added rte_power_kvm_vm implmentation to support Power Management from a VM.
librte_power now hides the implementation based on the environment used.
A new call rte_power_set_env() can explicidly set the environment, if not
called then auto-detection takes place.
rte_power_kvm_vm is subset of the librte_power APIs, the following is supported:
rte_power_init(unsigned lcore_id)
rte_power_exit(unsigned lcore_id)
rte_power_freq_up(unsigned lcore_id)
rte_power_freq_down(unsigned lcore_id)
rte_power_freq_min(unsigned lcore_id)
rte_power_freq_max(unsigned lcore_id)
The other unsupported APIs return -ENOTSUP
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/rte_power.c | 540 ++++-------------------------
lib/librte_power/rte_power.h | 120 +++++--
lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++++++++++++++++++
lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++++++++
lib/librte_power/rte_power_common.h | 39 +++
lib/librte_power/rte_power_kvm_vm.c | 135 ++++++++
lib/librte_power/rte_power_kvm_vm.h | 179 ++++++++++
7 files changed, 1248 insertions(+), 502 deletions(-)
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
create mode 100644 lib/librte_power/rte_power_common.h
create mode 100644 lib/librte_power/rte_power_kvm_vm.c
create mode 100644 lib/librte_power/rte_power_kvm_vm.h
diff --git a/lib/librte_power/rte_power.c b/lib/librte_power/rte_power.c
index 856da9a..998ed1c 100644
--- a/lib/librte_power/rte_power.c
+++ b/lib/librte_power/rte_power.c
@@ -31,515 +31,113 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <limits.h>
-
-#include <rte_memcpy.h>
#include <rte_atomic.h>
#include "rte_power.h"
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
-#ifdef RTE_LIBRTE_POWER_DEBUG
-#define POWER_DEBUG_TRACE(fmt, args...) do { \
- RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
- } while (0)
-#else
-#define POWER_DEBUG_TRACE(fmt, args...)
-#endif
-
-#define FOPEN_OR_ERR_RET(f, retval) do { \
- if ((f) == NULL) { \
- RTE_LOG(ERR, POWER, "File not openned\n"); \
- return (retval); \
- } \
-} while(0)
-
-#define FOPS_OR_NULL_GOTO(ret, label) do { \
- if ((ret) == NULL) { \
- RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
- goto label; \
- } \
-} while(0)
-
-#define FOPS_OR_ERR_GOTO(ret, label) do { \
- if ((ret) < 0) { \
- RTE_LOG(ERR, POWER, "File operations failed\n"); \
- goto label; \
- } \
-} while(0)
-
-#define STR_SIZE 1024
-#define POWER_CONVERT_TO_DECIMAL 10
+enum power_management_env global_default_env = PM_ENV_NOT_SET;
-#define POWER_GOVERNOR_USERSPACE "userspace"
-#define POWER_SYSFILE_GOVERNOR \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
-#define POWER_SYSFILE_AVAIL_FREQ \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
-#define POWER_SYSFILE_SETSPEED \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+volatile uint32_t global_env_cfg_status = 0;
-enum power_state {
- POWER_IDLE = 0,
- POWER_ONGOING,
- POWER_USED,
- POWER_UNKNOWN
-};
+/* function pointers */
+rte_power_freqs_t rte_power_freqs = NULL;
+rte_power_get_freq_t rte_power_get_freq = NULL;
+rte_power_set_freq_t rte_power_set_freq = NULL;
+rte_power_freq_change_t rte_power_freq_up = NULL;
+rte_power_freq_change_t rte_power_freq_down = NULL;
+rte_power_freq_change_t rte_power_freq_max = NULL;
+rte_power_freq_change_t rte_power_freq_min = NULL;
-/**
- * Power info per lcore.
- */
-struct rte_power_info {
- unsigned lcore_id; /**< Logical core id */
- uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
- uint32_t nb_freqs; /**< number of available freqs */
- FILE *f; /**< FD of scaling_setspeed */
- char governor_ori[32]; /**< Original governor name */
- uint32_t curr_idx; /**< Freq index in freqs array */
- volatile uint32_t state; /**< Power in use state */
-} __rte_cache_aligned;
-
-static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
-
-/**
- * It is to set specific freq for specific logical core, according to the index
- * of supported frequencies.
- */
-static int
-set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+int
+rte_power_set_env(enum power_management_env env)
{
- if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
- RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
- "should be less than %u\n", idx, pi->nb_freqs);
- return -1;
- }
-
- /* Check if it is the same as current */
- if (idx == pi->curr_idx)
+ if (rte_atomic32_cmpset(&global_env_cfg_status, 0, 1) == 0) {
return 0;
-
- POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
- idx, pi->freqs[idx], pi->lcore_id);
- if (fseek(pi->f, 0, SEEK_SET) < 0) {
- RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
- "for setting frequency for lcore %u\n", pi->lcore_id);
- return -1;
}
- if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
- RTE_LOG(ERR, POWER, "Fail to write new frequency for "
- "lcore %u\n", pi->lcore_id);
+ if (env == PM_ENV_ACPI_CPUFREQ) {
+ rte_power_freqs = rte_power_acpi_cpufreq_freqs;
+ rte_power_get_freq = rte_power_acpi_cpufreq_get_freq;
+ rte_power_set_freq = rte_power_acpi_cpufreq_set_freq;
+ rte_power_freq_up = rte_power_acpi_cpufreq_freq_up;
+ rte_power_freq_down = rte_power_acpi_cpufreq_freq_down;
+ rte_power_freq_min = rte_power_acpi_cpufreq_freq_min;
+ rte_power_freq_max = rte_power_acpi_cpufreq_freq_max;
+ } else if (env == PM_ENV_KVM_VM) {
+ rte_power_freqs = rte_power_kvm_vm_freqs;
+ rte_power_get_freq = rte_power_kvm_vm_get_freq;
+ rte_power_set_freq = rte_power_kvm_vm_set_freq;
+ rte_power_freq_up = rte_power_kvm_vm_freq_up;
+ rte_power_freq_down = rte_power_kvm_vm_freq_down;
+ rte_power_freq_min = rte_power_kvm_vm_freq_min;
+ rte_power_freq_max = rte_power_kvm_vm_freq_max;
+ } else {
+ RTE_LOG(ERR, POWER, "Invalid Power Management Environment(%d) set\n",
+ env);
+ rte_power_unset_env();
return -1;
}
- fflush(pi->f);
- pi->curr_idx = idx;
-
- return 1;
-}
-
-/**
- * It is to check the current scaling governor by reading sys file, and then
- * set it into 'userspace' if it is not by writing the sys file. The original
- * governor will be saved for rolling back.
- */
-static int
-power_set_governor_userspace(struct rte_power_info *pi)
-{
- FILE *f;
- int ret = -1;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *s;
- int val;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Check if current governor is userspace */
- if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
- sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
- ret = 0;
- POWER_DEBUG_TRACE("Power management governor of lcore %u is "
- "already userspace\n", pi->lcore_id);
- goto out;
- }
- /* Save the original governor */
- snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
-
- /* Write 'userspace' to the governor */
- val = fseek(f, 0, SEEK_SET);
- FOPS_OR_ERR_GOTO(val, out);
-
- val = fputs(POWER_GOVERNOR_USERSPACE, f);
- FOPS_OR_ERR_GOTO(val, out);
-
- ret = 0;
- RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
- "set to user space successfully\n", pi->lcore_id);
-out:
- fclose(f);
+ global_default_env = env;
+ return 0;
- return ret;
}
-/**
- * It is to get the available frequencies of the specific lcore by reading the
- * sys file.
- */
-static int
-power_get_available_freqs(struct rte_power_info *pi)
+void
+rte_power_unset_env(void)
{
- FILE *f;
- int ret = -1, i, count;
- char *p;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *freqs[RTE_MAX_LCORE_FREQS];
- char *s;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
- pi->lcore_id);
- f = fopen(fullpath, "r");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Strip the line break if there is */
- p = strchr(buf, '\n');
- if (p != NULL)
- *p = 0;
-
- /* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
- count = rte_strsplit(buf, sizeof(buf), freqs,
- RTE_MAX_LCORE_FREQS, ' ');
- if (count <= 0) {
- RTE_LOG(ERR, POWER, "No available frequency in "
- ""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
- goto out;
- }
- if (count >= RTE_MAX_LCORE_FREQS) {
- RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
- count);
- goto out;
- }
-
- /* Store the available frequncies into power context */
- for (i = 0, pi->nb_freqs = 0; i < count; i++) {
- POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
- i, freqs[i]);
- pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
- POWER_CONVERT_TO_DECIMAL);
- }
-
- ret = 0;
- POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
- count, pi->lcore_id);
-out:
- fclose(f);
-
- return ret;
+ if (rte_atomic32_cmpset(&global_env_cfg_status, 1, 0) != 0)
+ global_default_env = PM_ENV_NOT_SET;
}
-/**
- * It is to fopen the sys file for the future setting the lcore frequency.
- */
-static int
-power_init_for_setting_freq(struct rte_power_info *pi)
-{
- FILE *f;
- char fullpath[PATH_MAX];
- char buf[BUFSIZ];
- uint32_t i, freq;
- char *s;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, -1);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
- for (i = 0; i < pi->nb_freqs; i++) {
- if (freq == pi->freqs[i]) {
- pi->curr_idx = i;
- pi->f = f;
- return 0;
- }
- }
-
-out:
- fclose(f);
-
- return -1;
+enum power_management_env
+rte_power_get_env(void) {
+ return global_default_env;
}
int
rte_power_init(unsigned lcore_id)
{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
- == 0) {
- RTE_LOG(INFO, POWER, "Power management of lcore %u is "
- "in use\n", lcore_id);
- return -1;
- }
-
- pi->lcore_id = lcore_id;
- /* Check and set the governor */
- if (power_set_governor_userspace(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
- "userspace\n", lcore_id);
- goto fail;
- }
+ int ret = -1;
- /* Get the available frequencies */
- if (power_get_available_freqs(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
- "lcore %u\n", lcore_id);
- goto fail;
+ if (global_default_env == PM_ENV_ACPI_CPUFREQ) {
+ return rte_power_acpi_cpufreq_init(lcore_id);
}
-
- /* Init for setting lcore frequency */
- if (power_init_for_setting_freq(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
- "lcore %u\n", lcore_id);
- goto fail;
+ if (global_default_env == PM_ENV_KVM_VM) {
+ return rte_power_kvm_vm_init(lcore_id);
}
-
- /* Set freq to max by default */
- if (rte_power_freq_max(lcore_id) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
- "to max\n", lcore_id);
- goto fail;
+ /* Auto detect Environment */
+ RTE_LOG(INFO, POWER, "Attempting to initialise ACPI cpufreq power "
+ "management...\n");
+ ret = rte_power_acpi_cpufreq_init(lcore_id);
+ if (ret == 0) {
+ rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ goto out;
}
- RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
- "power manamgement\n", lcore_id);
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
-
- return 0;
-
-fail:
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
-
- return -1;
-}
-
-/**
- * It is to check the governor and then set the original governor back if
- * needed by writing the the sys file.
- */
-static int
-power_set_governor_original(struct rte_power_info *pi)
-{
- FILE *f;
- int ret = -1;
- char buf[BUFSIZ];
- char fullpath[PATH_MAX];
- char *s;
- int val;
-
- snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
- pi->lcore_id);
- f = fopen(fullpath, "rw+");
- FOPEN_OR_ERR_RET(f, ret);
-
- s = fgets(buf, sizeof(buf), f);
- FOPS_OR_NULL_GOTO(s, out);
-
- /* Check if the governor to be set is the same as current */
- if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
- ret = 0;
- POWER_DEBUG_TRACE("Power management governor of lcore %u "
- "has already been set to %s\n",
- pi->lcore_id, pi->governor_ori);
+ RTE_LOG(INFO, POWER, "Attempting to initialise VM power management...\n");
+ ret = rte_power_kvm_vm_init(lcore_id);
+ if (ret == 0) {
+ rte_power_set_env(PM_ENV_KVM_VM);
goto out;
}
-
- /* Write back the original governor */
- val = fseek(f, 0, SEEK_SET);
- FOPS_OR_ERR_GOTO(val, out);
-
- val = fputs(pi->governor_ori, f);
- FOPS_OR_ERR_GOTO(val, out);
-
- ret = 0;
- RTE_LOG(INFO, POWER, "Power manamgement governor of lcore %u "
- "has been set back to %s successfully\n",
- pi->lcore_id, pi->governor_ori);
+ RTE_LOG(ERR, POWER, "Unable to set Power Management Environment for lcore "
+ "%u\n", lcore_id);
out:
- fclose(f);
-
return ret;
}
int
rte_power_exit(unsigned lcore_id)
{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
- lcore_id, RTE_MAX_LCORE - 1U);
- return -1;
- }
- pi = &lcore_power_info[lcore_id];
- if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
- == 0) {
- RTE_LOG(INFO, POWER, "Power management of lcore %u is "
- "not used\n", lcore_id);
- return -1;
- }
-
- /* Close FD of setting freq */
- fclose(pi->f);
- pi->f = NULL;
-
- /* Set the governor back to the original */
- if (power_set_governor_original(pi) < 0) {
- RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
- "to the original\n", lcore_id);
- goto fail;
- }
-
- RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
- "'userspace' mode and been set back to the "
- "original\n", lcore_id);
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
-
- return 0;
-
-fail:
- rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+ if (global_default_env == PM_ENV_ACPI_CPUFREQ)
+ return rte_power_acpi_cpufreq_exit(lcore_id);
+ if (global_default_env == PM_ENV_KVM_VM)
+ return rte_power_kvm_vm_exit(lcore_id);
+ RTE_LOG(ERR, POWER, "Environment has not been set, unable to exit "
+ "gracefully\n");
return -1;
-}
-
-uint32_t
-rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE || !freqs) {
- RTE_LOG(ERR, POWER, "Invalid input parameter\n");
- return 0;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (num < pi->nb_freqs) {
- RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
- return 0;
- }
- rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
-
- return pi->nb_freqs;
-}
-
-uint32_t
-rte_power_get_freq(unsigned lcore_id)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return RTE_POWER_INVALID_FREQ_INDEX;
- }
-
- return lcore_power_info[lcore_id].curr_idx;
-}
-
-int
-rte_power_set_freq(unsigned lcore_id, uint32_t index)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- return set_freq_internal(&(lcore_power_info[lcore_id]), index);
-}
-
-int
-rte_power_freq_down(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
- pi = &lcore_power_info[lcore_id];
- if (pi->curr_idx + 1 == pi->nb_freqs)
- return 0;
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->curr_idx + 1);
}
-
-int
-rte_power_freq_up(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
- if (pi->curr_idx == 0)
- return 0;
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->curr_idx - 1);
-}
-
-int
-rte_power_freq_max(unsigned lcore_id)
-{
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(&lcore_power_info[lcore_id], 0);
-}
-
-int
-rte_power_freq_min(unsigned lcore_id)
-{
- struct rte_power_info *pi;
-
- if (lcore_id >= RTE_MAX_LCORE) {
- RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
- return -1;
- }
-
- pi = &lcore_power_info[lcore_id];
-
- /* Frequencies in the array are from high to low. */
- return set_freq_internal(pi, pi->nb_freqs - 1);
-}
-
diff --git a/lib/librte_power/rte_power.h b/lib/librte_power/rte_power.h
index 9c1419e..9338069 100644
--- a/lib/librte_power/rte_power.h
+++ b/lib/librte_power/rte_power.h
@@ -48,12 +48,48 @@
extern "C" {
#endif
-#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+/* Power Management Environment State */
+enum power_management_env {PM_ENV_NOT_SET, PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM};
/**
- * Initialize power management for a specific lcore. It will check and set the
- * governor to userspace for the lcore, get the available frequencies, and
- * prepare to set new lcore frequency.
+ * Set the default power management implementation. If this is not called prior
+ * to rte_power_init(), then auto-detect of the environment will take place.
+ * It is not thread safe.
+ *
+ * @param env
+ * env. The environment in which to initialise Power Management for.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_set_env(enum power_management_env env);
+
+/**
+ * Unset the global environment configuration.
+ * This can only be called after all threads have completed.
+ *
+ * @param None.
+ *
+ * @return
+ * None.
+ */
+void rte_power_unset_env(void);
+
+/**
+ * Get the default power management implementation.
+ *
+ * @param None.
+ *
+ * @return
+ * power_management_env The configured environment.
+ */
+enum power_management_env rte_power_get_env(void);
+
+/**
+ * Initialize power management for a specific lcore. If rte_power_set_env() has
+ * not been called then an auto-detect of the environment will start and
+ * initialise the corresponding resources.
*
* @param lcore_id
* lcore id.
@@ -65,8 +101,9 @@ extern "C" {
int rte_power_init(unsigned lcore_id);
/**
- * Exit power management on a specific lcore. It will set the governor to which
- * is before initialized.
+ * Exit power management on a specific lcore. This will call the environment
+ * dependent exit function.
+ *
*
* @param lcore_id
* lcore id.
@@ -78,11 +115,9 @@ int rte_power_init(unsigned lcore_id);
int rte_power_exit(unsigned lcore_id);
/**
- * Get the available frequencies of a specific lcore. The return value will be
- * the minimal one of the total number of available frequencies and the number
- * of buffer. The index of available frequencies used in other interfaces
- * should be in the range of 0 to this return value.
- * It should be protected outside of this function for threadsafe.
+ * Get the available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -94,12 +129,15 @@ int rte_power_exit(unsigned lcore_id);
* @return
* The number of available frequencies.
*/
-uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
+typedef uint32_t (*rte_power_freqs_t)(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+extern rte_power_freqs_t rte_power_freqs;
/**
- * Return the current index of available frequencies of a specific lcore. It
- * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
- * It should be protected outside of this function for threadsafe.
+ * Return the current index of available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -107,12 +145,15 @@ uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
* @return
* The current index of available frequencies.
*/
-uint32_t rte_power_get_freq(unsigned lcore_id);
+typedef uint32_t (*rte_power_get_freq_t)(unsigned lcore_id);
+
+extern rte_power_get_freq_t rte_power_get_freq;
/**
* Set the new frequency for a specific lcore by indicating the index of
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
*
* @param lcore_id
* lcore id.
@@ -121,70 +162,87 @@ uint32_t rte_power_get_freq(unsigned lcore_id);
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_set_freq(unsigned lcore_id, uint32_t index);
+typedef int (*rte_power_set_freq_t)(unsigned lcore_id, uint32_t index);
+
+extern rte_power_set_freq_t rte_power_set_freq;
+
+/**
+ * Function pointer definition for generic frequency change functions. Review
+ * each environments specific documentation for usage.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+typedef int (*rte_power_freq_change_t)(unsigned lcore_id);
/**
* Scale up the frequency of a specific lcore according to the available
* frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_up(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_up;
/**
* Scale down the frequency of a specific lcore according to the available
* frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_down(unsigned lcore_id);
+
+extern rte_power_freq_change_t rte_power_freq_down;
/**
* Scale up the frequency of a specific lcore to the highest according to the
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_max(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_max;
/**
* Scale down the frequency of a specific lcore to the lowest according to the
* available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage..
*
* @param lcore_id
* lcore id.
*
* @return
* - 1 on success with frequency changed.
- * - 0 on success without frequency chnaged.
+ * - 0 on success without frequency changed.
* - Negative on error.
*/
-int rte_power_freq_min(unsigned lcore_id);
+rte_power_freq_change_t rte_power_freq_min;
#ifdef __cplusplus
}
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.c b/lib/librte_power/rte_power_acpi_cpufreq.c
new file mode 100644
index 0000000..09085c3
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.c
@@ -0,0 +1,545 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+
+#include <rte_memcpy.h>
+#include <rte_atomic.h>
+
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_common.h"
+
+#ifdef RTE_LIBRTE_POWER_DEBUG
+#define POWER_DEBUG_TRACE(fmt, args...) do { \
+ RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
+} while (0)
+#else
+#define POWER_DEBUG_TRACE(fmt, args...)
+#endif
+
+#define FOPEN_OR_ERR_RET(f, retval) do { \
+ if ((f) == NULL) { \
+ RTE_LOG(ERR, POWER, "File not openned\n"); \
+ return retval; \
+ } \
+} while (0)
+
+#define FOPS_OR_NULL_GOTO(ret, label) do { \
+ if ((ret) == NULL) { \
+ RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
+ goto label; \
+ } \
+} while (0)
+
+#define FOPS_OR_ERR_GOTO(ret, label) do { \
+ if ((ret) < 0) { \
+ RTE_LOG(ERR, POWER, "File operations failed\n"); \
+ goto label; \
+ } \
+} while (0)
+
+#define STR_SIZE 1024
+#define POWER_CONVERT_TO_DECIMAL 10
+
+#define POWER_GOVERNOR_USERSPACE "userspace"
+#define POWER_SYSFILE_GOVERNOR \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
+#define POWER_SYSFILE_AVAIL_FREQ \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
+#define POWER_SYSFILE_SETSPEED \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+
+enum power_state {
+ POWER_IDLE = 0,
+ POWER_ONGOING,
+ POWER_USED,
+ POWER_UNKNOWN
+};
+
+/**
+ * Power info per lcore.
+ */
+struct rte_power_info {
+ unsigned lcore_id; /**< Logical core id */
+ uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
+ uint32_t nb_freqs; /**< number of available freqs */
+ FILE *f; /**< FD of scaling_setspeed */
+ char governor_ori[32]; /**< Original governor name */
+ uint32_t curr_idx; /**< Freq index in freqs array */
+ volatile uint32_t state; /**< Power in use state */
+} __rte_cache_aligned;
+
+static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
+
+/**
+ * It is to set specific freq for specific logical core, according to the index
+ * of supported frequencies.
+ */
+static int
+set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+{
+ if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
+ RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
+ "should be less than %u\n", idx, pi->nb_freqs);
+ return -1;
+ }
+
+ /* Check if it is the same as current */
+ if (idx == pi->curr_idx)
+ return 0;
+
+ POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
+ idx, pi->freqs[idx], pi->lcore_id);
+ if (fseek(pi->f, 0, SEEK_SET) < 0) {
+ RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
+ "for setting frequency for lcore %u\n", pi->lcore_id);
+ return -1;
+ }
+ if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
+ RTE_LOG(ERR, POWER, "Fail to write new frequency for "
+ "lcore %u\n", pi->lcore_id);
+ return -1;
+ }
+ fflush(pi->f);
+ pi->curr_idx = idx;
+
+ return 1;
+}
+
+/**
+ * It is to check the current scaling governor by reading sys file, and then
+ * set it into 'userspace' if it is not by writing the sys file. The original
+ * governor will be saved for rolling back.
+ */
+static int
+power_set_governor_userspace(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *s;
+ int val;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Check if current governor is userspace */
+ if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
+ sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
+ ret = 0;
+ POWER_DEBUG_TRACE("Power management governor of lcore %u is "
+ "already userspace\n", pi->lcore_id);
+ goto out;
+ }
+ /* Save the original governor */
+ snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
+
+ /* Write 'userspace' to the governor */
+ val = fseek(f, 0, SEEK_SET);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ val = fputs(POWER_GOVERNOR_USERSPACE, f);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ ret = 0;
+ RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
+ "set to user space successfully\n", pi->lcore_id);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+/**
+ * It is to get the available frequencies of the specific lcore by reading the
+ * sys file.
+ */
+static int
+power_get_available_freqs(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1, i, count;
+ char *p;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *freqs[RTE_MAX_LCORE_FREQS];
+ char *s;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
+ pi->lcore_id);
+ f = fopen(fullpath, "r");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Strip the line break if there is */
+ p = strchr(buf, '\n');
+ if (p != NULL)
+ *p = 0;
+
+ /* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
+ count = rte_strsplit(buf, sizeof(buf), freqs,
+ RTE_MAX_LCORE_FREQS, ' ');
+ if (count <= 0) {
+ RTE_LOG(ERR, POWER, "No available frequency in "
+ ""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
+ goto out;
+ }
+ if (count >= RTE_MAX_LCORE_FREQS) {
+ RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
+ count);
+ goto out;
+ }
+
+ /* Store the available frequncies into power context */
+ for (i = 0, pi->nb_freqs = 0; i < count; i++) {
+ POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
+ i, freqs[i]);
+ pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
+ POWER_CONVERT_TO_DECIMAL);
+ }
+
+ ret = 0;
+ POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
+ count, pi->lcore_id);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+/**
+ * It is to fopen the sys file for the future setting the lcore frequency.
+ */
+static int
+power_init_for_setting_freq(struct rte_power_info *pi)
+{
+ FILE *f;
+ char fullpath[PATH_MAX];
+ char buf[BUFSIZ];
+ uint32_t i, freq;
+ char *s;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, -1);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
+ for (i = 0; i < pi->nb_freqs; i++) {
+ if (freq == pi->freqs[i]) {
+ pi->curr_idx = i;
+ pi->f = f;
+ return 0;
+ }
+ }
+
+ out:
+ fclose(f);
+
+ return -1;
+}
+
+int
+rte_power_acpi_cpufreq_init(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+ lcore_id, RTE_MAX_LCORE - 1U);
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
+ == 0) {
+ RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+ "in use\n", lcore_id);
+ return -1;
+ }
+
+ pi->lcore_id = lcore_id;
+ /* Check and set the governor */
+ if (power_set_governor_userspace(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
+ "userspace\n", lcore_id);
+ goto fail;
+ }
+
+ /* Get the available frequencies */
+ if (power_get_available_freqs(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
+ "lcore %u\n", lcore_id);
+ goto fail;
+ }
+
+ /* Init for setting lcore frequency */
+ if (power_init_for_setting_freq(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
+ "lcore %u\n", lcore_id);
+ goto fail;
+ }
+
+ /* Set freq to max by default */
+ if (rte_power_acpi_cpufreq_freq_max(lcore_id) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
+ "to max\n", lcore_id);
+ goto fail;
+ }
+
+ RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
+ "power manamgement\n", lcore_id);
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
+
+ return 0;
+
+ fail:
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+ return -1;
+}
+
+/**
+ * It is to check the governor and then set the original governor back if
+ * needed by writing the the sys file.
+ */
+static int
+power_set_governor_original(struct rte_power_info *pi)
+{
+ FILE *f;
+ int ret = -1;
+ char buf[BUFSIZ];
+ char fullpath[PATH_MAX];
+ char *s;
+ int val;
+
+ snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+ pi->lcore_id);
+ f = fopen(fullpath, "rw+");
+ FOPEN_OR_ERR_RET(f, ret);
+
+ s = fgets(buf, sizeof(buf), f);
+ FOPS_OR_NULL_GOTO(s, out);
+
+ /* Check if the governor to be set is the same as current */
+ if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
+ ret = 0;
+ POWER_DEBUG_TRACE("Power management governor of lcore %u "
+ "has already been set to %s\n",
+ pi->lcore_id, pi->governor_ori);
+ goto out;
+ }
+
+ /* Write back the original governor */
+ val = fseek(f, 0, SEEK_SET);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ val = fputs(pi->governor_ori, f);
+ FOPS_OR_ERR_GOTO(val, out);
+
+ ret = 0;
+ RTE_LOG(INFO, POWER, "Power management governor of lcore %u "
+ "has been set back to %s successfully\n",
+ pi->lcore_id, pi->governor_ori);
+ out:
+ fclose(f);
+
+ return ret;
+}
+
+int
+rte_power_acpi_cpufreq_exit(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+ lcore_id, RTE_MAX_LCORE - 1U);
+ return -1;
+ }
+ pi = &lcore_power_info[lcore_id];
+ if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
+ == 0) {
+ RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+ "not used\n", lcore_id);
+ return -1;
+ }
+
+ /* Close FD of setting freq */
+ fclose(pi->f);
+ pi->f = NULL;
+
+ /* Set the governor back to the original */
+ if (power_set_governor_original(pi) < 0) {
+ RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
+ "to the original\n", lcore_id);
+ goto fail;
+ }
+
+ RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
+ "'userspace' mode and been set back to the "
+ "original\n", lcore_id);
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
+
+ return 0;
+
+ fail:
+ rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+ return -1;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE || !freqs) {
+ RTE_LOG(ERR, POWER, "Invalid input parameter\n");
+ return 0;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (num < pi->nb_freqs) {
+ RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
+ return 0;
+ }
+ rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
+
+ return pi->nb_freqs;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_get_freq(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return RTE_POWER_INVALID_FREQ_INDEX;
+ }
+
+ return lcore_power_info[lcore_id].curr_idx;
+}
+
+int
+rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ return set_freq_internal(&(lcore_power_info[lcore_id]), index);
+}
+
+int
+rte_power_acpi_cpufreq_freq_down(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (pi->curr_idx + 1 == pi->nb_freqs)
+ return 0;
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->curr_idx + 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_up(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+ if (pi->curr_idx == 0)
+ return 0;
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->curr_idx - 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_max(unsigned lcore_id)
+{
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(&lcore_power_info[lcore_id], 0);
+}
+
+int
+rte_power_acpi_cpufreq_freq_min(unsigned lcore_id)
+{
+ struct rte_power_info *pi;
+
+ if (lcore_id >= RTE_MAX_LCORE) {
+ RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+ return -1;
+ }
+
+ pi = &lcore_power_info[lcore_id];
+
+ /* Frequencies in the array are from high to low. */
+ return set_freq_internal(pi, pi->nb_freqs - 1);
+}
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.h b/lib/librte_power/rte_power_acpi_cpufreq.h
new file mode 100644
index 0000000..68578e9
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.h
@@ -0,0 +1,192 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_ACPI_CPUFREQ_H
+#define _RTE_POWER_ACPI_CPUFREQ_H
+
+/**
+ * @file
+ * RTE Power Management via userspace ACPI cpufreq
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore. It will check and set the
+ * governor to userspace for the lcore, get the available frequencies, and
+ * prepare to set new lcore frequency.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore. It will set the governor to which
+ * is before initialized.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore. The return value will be
+ * the minimal one of the total number of available frequencies and the number
+ * of buffer. The index of available frequencies used in other interfaces
+ * should be in the range of 0 to this return value.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param freqs
+ * The buffer array to save the frequencies.
+ * @param num
+ * The number of frequencies to get.
+ *
+ * @return
+ * The number of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore. It
+ * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * The current index of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param index
+ * The index of available frequencies.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency changed.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success with frequency changed.
+ * - 0 on success without frequency chnaged.
+ * - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/lib/librte_power/rte_power_common.h b/lib/librte_power/rte_power_common.h
new file mode 100644
index 0000000..64bd168
--- /dev/null
+++ b/lib/librte_power/rte_power_common.h
@@ -0,0 +1,39 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_POWER_COMMON_H_
+#define RTE_POWER_COMMON_H_
+
+#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+
+#endif /* RTE_POWER_COMMON_H_ */
diff --git a/lib/librte_power/rte_power_kvm_vm.c b/lib/librte_power/rte_power_kvm_vm.c
new file mode 100644
index 0000000..3ccd92b
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.c
@@ -0,0 +1,135 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <errno.h>
+#include <string.h>
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
+
+#define FD_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+static struct channel_packet pkt[CHANNEL_CMDS_MAX_VM_CHANNELS];
+
+
+int
+rte_power_kvm_vm_init(unsigned lcore_id)
+{
+ if (lcore_id >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+ return -1;
+ }
+ pkt[lcore_id].command = CPU_POWER;
+ pkt[lcore_id].resource_id = lcore_id;
+ return guest_channel_host_connect(FD_PATH, lcore_id);
+}
+
+int
+rte_power_kvm_vm_exit(unsigned lcore_id)
+{
+ guest_channel_host_disconnect(lcore_id);
+ return 0;
+}
+
+uint32_t
+rte_power_kvm_vm_freqs(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t *freqs,
+ __attribute__((unused)) uint32_t num)
+{
+ RTE_LOG(ERR, POWER, "rte_power_freqs is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+uint32_t
+rte_power_kvm_vm_get_freq(__attribute__((unused)) unsigned lcore_id)
+{
+ RTE_LOG(ERR, POWER, "rte_power_get_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+int
+rte_power_kvm_vm_set_freq(__attribute__((unused)) unsigned lcore_id,
+ __attribute__((unused)) uint32_t index)
+{
+ RTE_LOG(ERR, POWER, "rte_power_set_freq is not implemented "
+ "for Virtual Machine Power Management\n");
+ return -ENOTSUP;
+}
+
+static inline int
+send_msg(unsigned lcore_id, uint32_t scale_direction)
+{
+ int ret;
+ if (lcore_id >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+ RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+ lcore_id, CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+ return -1;
+ }
+ pkt[lcore_id].unit = scale_direction;
+ ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id);
+ if (ret == 0)
+ return 1;
+ RTE_LOG(DEBUG, POWER, "Error sending message: %s\n", strerror(ret));
+ return -1;
+}
+
+int
+rte_power_kvm_vm_freq_up(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_UP);
+}
+
+int
+rte_power_kvm_vm_freq_down(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_DOWN);
+}
+
+int
+rte_power_kvm_vm_freq_max(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_MAX);
+}
+
+int
+rte_power_kvm_vm_freq_min(unsigned lcore_id)
+{
+ return send_msg(lcore_id, CPU_POWER_SCALE_MIN);
+}
diff --git a/lib/librte_power/rte_power_kvm_vm.h b/lib/librte_power/rte_power_kvm_vm.h
new file mode 100644
index 0000000..dcbc878
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.h
@@ -0,0 +1,179 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_KVM_VM_H
+#define _RTE_POWER_KVM_VM_H
+
+/**
+ * @file
+ * RTE Power Management KVM VM
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 0 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param freqs
+ * The buffer array to save the frequencies.
+ * @param num
+ * The number of frequencies to get.
+ *
+ * @return
+ * -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_freqs(unsigned lcore_id, uint32_t *freqs,
+ uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ * lcore id.
+ * @param index
+ * The index of available frequencies.
+ *
+ * @return
+ * -ENOTSUP
+ */
+int rte_power_kvm_vm_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore. This request is forwarded to the
+ * host monitor.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ * lcore id.
+ *
+ * @return
+ * - 1 on success.
+ * - Negative on error.
+ */
+int rte_power_kvm_vm_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 08/10] Packet format for VM Power Management(Host and Guest).
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
` (6 preceding siblings ...)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 07/10] librte_power common interface for Guest and Host Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
` (4 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
Provides a command packet format for host and guest.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/channel_commands.h | 77 +++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 lib/librte_power/channel_commands.h
diff --git a/lib/librte_power/channel_commands.h b/lib/librte_power/channel_commands.h
new file mode 100644
index 0000000..7e78a8b
--- /dev/null
+++ b/lib/librte_power/channel_commands.h
@@ -0,0 +1,77 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef CHANNEL_COMMANDS_H_
+#define CHANNEL_COMMANDS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/* Maximum number of CPUs */
+#define CHANNEL_CMDS_MAX_CPUS 64
+#if CHANNEL_CMDS_MAX_CPUS > 64
+#error Maximum number of cores is 64, overflow is guaranteed to \
+ cause problems with VM Power Management
+#endif
+
+/* Maximum number of channels per VM */
+#define CHANNEL_CMDS_MAX_VM_CHANNELS 64
+
+/* Maximum number of channels per VM */
+#define CHANNEL_CMDS_MAX_VM_CHANNELS 64
+
+/* Valid Commands */
+#define CPU_POWER 1
+#define CPU_POWER_CONNECT 2
+
+/* CPU Power Command Scaling */
+#define CPU_POWER_SCALE_UP 1
+#define CPU_POWER_SCALE_DOWN 2
+#define CPU_POWER_SCALE_MAX 3
+#define CPU_POWER_SCALE_MIN 4
+
+struct channel_packet {
+ uint64_t resource_id; /**< core_num, device */
+ uint32_t unit; /**< scale down/up/min/max */
+ uint32_t command; /**< Power, IO, etc */
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* CHANNEL_COMMANDS_H_ */
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 09/10] Build system integration for VM Power Management(Guest and Host)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
` (7 preceding siblings ...)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 10/10] VM Power Management Unit Tests Alan Carew
` (3 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
librte_power now contains both rte_power_acpi_cpufreq and rte_power_kvm_vm
implementations.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
lib/librte_power/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/librte_power/Makefile b/lib/librte_power/Makefile
index 6185812..d672a5a 100644
--- a/lib/librte_power/Makefile
+++ b/lib/librte_power/Makefile
@@ -37,7 +37,8 @@ LIB = librte_power.a
CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -fno-strict-aliasing
# all source are stored in SRCS-y
-SRCS-$(CONFIG_RTE_LIBRTE_POWER) := rte_power.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) := rte_power.c rte_power_acpi_cpufreq.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += rte_power_kvm_vm.c guest_channel.c
# install this header file
SYMLINK-$(CONFIG_RTE_LIBRTE_POWER)-include := rte_power.h
--
1.9.3
^ permalink raw reply [flat|nested] 97+ messages in thread
* [dpdk-dev] [PATCH v4 10/10] VM Power Management Unit Tests
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 " Alan Carew
` (8 preceding siblings ...)
2014-10-12 19:36 ` [dpdk-dev] [PATCH v4 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
@ 2014-10-12 19:36 ` Alan Carew
2014-10-13 6:17 ` [dpdk-dev] [PATCH v4 00/10] VM Power Management Liu, Yong
` (2 subsequent siblings)
12 siblings, 0 replies; 97+ messages in thread
From: Alan Carew @ 2014-10-12 19:36 UTC (permalink / raw)
To: dev
Updated the unit tests to cover both librte_power implementations as well as
the external API.
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
app/test/Makefile | 3 +-
app/test/autotest_data.py | 26 ++
app/test/test_power.c | 445 +++---------------------------
app/test/test_power_acpi_cpufreq.c | 544 +++++++++++++++++++++++++++++++++++++
app/test/test_power_kvm_vm.c | 308 +++++++++++++++++++++
5 files changed, 917 insertions(+), 409 deletions(-)
create mode 100644 app/test/test_power_acpi_cpufreq.c
create mode 100644 app/test/test_power_kvm_vm.c
diff --git a/app/test/Makefile b/app/test/Makefile
index 6af6d76..9417eda 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -119,7 +119,8 @@ endif
SRCS-$(CONFIG_RTE_LIBRTE_METER) += test_meter.c
SRCS-$(CONFIG_RTE_LIBRTE_KNI) += test_kni.c
-SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power.c test_power_acpi_cpufreq.c
+SRCS-$(CONFIG_RTE_LIBRTE_POWER) += test_power_kvm_vm.c
SRCS-y += test_common.c
SRCS-$(CONFIG_RTE_LIBRTE_IVSHMEM) += test_ivshmem.c
diff --git a/app/test/autotest_data.py b/app/test/autotest_data.py
index 878c72e..618a946 100644
--- a/app/test/autotest_data.py
+++ b/app/test/autotest_data.py
@@ -425,6 +425,32 @@ non_parallel_test_group_list = [
]
},
{
+ "Prefix" : "power_acpi_cpufreq",
+ "Memory" : all_sockets(512),
+ "Tests" :
+ [
+ {
+ "Name" : "Power ACPI cpufreq autotest",
+ "Command" : "power_acpi_cpufreq_autotest",
+ "Func" : default_autotest,
+ "Report" : None,
+ },
+ ]
+},
+{
+ "Prefix" : "power_kvm_vm",
+ "Memory" : "512",
+ "Tests" :
+ [
+ {
+ "Name" : "Power KVM VM autotest",
+ "Command" : "power_kvm_vm_autotest",
+ "Func" : default_autotest,
+ "Report" : None,
+ },
+ ]
+},
+{
"Prefix" : "lpm6",
"Memory" : "512",
"Tests" :
diff --git a/app/test/test_power.c b/app/test/test_power.c
index d9eb420..64a2305 100644
--- a/app/test/test_power.c
+++ b/app/test/test_power.c
@@ -41,437 +41,66 @@
#include <rte_power.h>
-#define TEST_POWER_LCORE_ID 2U
-#define TEST_POWER_LCORE_INVALID ((unsigned)RTE_MAX_LCORE)
-#define TEST_POWER_FREQS_NUM_MAX ((unsigned)RTE_MAX_LCORE_FREQS)
-
-#define TEST_POWER_SYSFILE_CUR_FREQ \
- "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_cur_freq"
-
-static uint32_t total_freq_num;
-static uint32_t freqs[TEST_POWER_FREQS_NUM_MAX];
-
-static int
-check_cur_freq(unsigned lcore_id, uint32_t idx)
-{
-#define TEST_POWER_CONVERT_TO_DECIMAL 10
- FILE *f;
- char fullpath[PATH_MAX];
- char buf[BUFSIZ];
- uint32_t cur_freq;
- int ret = -1;
-
- if (snprintf(fullpath, sizeof(fullpath),
- TEST_POWER_SYSFILE_CUR_FREQ, lcore_id) < 0) {
- return 0;
- }
- f = fopen(fullpath, "r");
- if (f == NULL) {
- return 0;
- }
- if (fgets(buf, sizeof(buf), f) == NULL) {
- goto fail_get_cur_freq;
- }
- cur_freq = strtoul(buf, NULL, TEST_POWER_CONVERT_TO_DECIMAL);
- ret = (freqs[idx] == cur_freq ? 0 : -1);
-
-fail_get_cur_freq:
- fclose(f);
-
- return ret;
-}
-
-/* Check rte_power_freqs() */
-static int
-check_power_freqs(void)
-{
- uint32_t ret;
-
- total_freq_num = 0;
- memset(freqs, 0, sizeof(freqs));
-
- /* test with an invalid lcore id */
- ret = rte_power_freqs(TEST_POWER_LCORE_INVALID, freqs,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* test with NULL buffer to save available freqs */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, NULL,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully with "
- "NULL buffer on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* test of getting zero number of freqs */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs, 0);
- if (ret > 0) {
- printf("Unexpectedly get available freqs successfully with "
- "zero buffer size on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* test with all valid input parameters */
- ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret == 0 || ret > TEST_POWER_FREQS_NUM_MAX) {
- printf("Fail to get available freqs on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Save the total number of available freqs */
- total_freq_num = ret;
-
- return 0;
-}
-
-/* Check rte_power_get_freq() */
-static int
-check_power_get_freq(void)
-{
- int ret;
- uint32_t count;
-
- /* test with an invalid lcore id */
- count = rte_power_get_freq(TEST_POWER_LCORE_INVALID);
- if (count < TEST_POWER_FREQS_NUM_MAX) {
- printf("Unexpectedly get freq index successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- count = rte_power_get_freq(TEST_POWER_LCORE_ID);
- if (count >= TEST_POWER_FREQS_NUM_MAX) {
- printf("Fail to get the freq index on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, count);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_set_freq() */
-static int
-check_power_set_freq(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_set_freq(TEST_POWER_LCORE_INVALID, 0);
- if (ret >= 0) {
- printf("Unexpectedly set freq index successfully on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* test with an invalid freq index */
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID,
- TEST_POWER_FREQS_NUM_MAX);
- if (ret >= 0) {
- printf("Unexpectedly set an invalid freq index (%u)"
- "successfully on lcore %u\n", TEST_POWER_FREQS_NUM_MAX,
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /**
- * test with an invalid freq index which is right one bigger than
- * total number of freqs
- */
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num);
- if (ret >= 0) {
- printf("Unexpectedly set an invalid freq index (%u)"
- "successfully on lcore %u\n", total_freq_num,
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0) {
- printf("Fail to set freq index on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_down() */
-static int
-check_power_freq_down(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_down(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale down successfully the freq on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* Scale down to min and then scale down one step */
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- /* Scale up to max and then scale down one step */
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf ("Fail to scale down the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_up() */
-static int
-check_power_freq_up(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_up(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale up successfully the freq on %u\n",
- TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- /* Scale down to min and then scale up one step */
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 2);
- if (ret < 0)
- return -1;
-
- /* Scale up to max and then scale up one step */
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
- ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_max() */
-static int
-check_power_freq_max(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_max(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale up successfully the freq to max on "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
- ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale up the freq to max on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
-/* Check rte_power_freq_min() */
-static int
-check_power_freq_min(void)
-{
- int ret;
-
- /* test with an invalid lcore id */
- ret = rte_power_freq_min(TEST_POWER_LCORE_INVALID);
- if (ret >= 0) {
- printf("Unexpectedly scale down successfully the freq to min "
- "on lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
- ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Fail to scale down the freq to min on lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
- }
-
- /* Check the current frequency */
- ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
- if (ret < 0)
- return -1;
-
- return 0;
-}
-
static int
test_power(void)
{
int ret = -1;
+ enum power_management_env env;
- /* test of init power management for an invalid lcore */
- ret = rte_power_init(TEST_POWER_LCORE_INVALID);
+ /* Test setting an invalid environment */
+ ret = rte_power_set_env(PM_ENV_NOT_SET);
if (ret == 0) {
- printf("Unexpectedly initialise power management successfully "
- "for lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
- }
-
- ret = rte_power_init(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Cannot initialise power management for lcore %u\n",
- TEST_POWER_LCORE_ID);
+ printf("Unexpectedly succeeded on setting an invalid environment\n");
return -1;
}
- /**
- * test of initialising power management for the lcore which has
- * been initialised
- */
- ret = rte_power_init(TEST_POWER_LCORE_ID);
- if (ret == 0) {
- printf("Unexpectedly init successfully power twice on "
- "lcore %u\n", TEST_POWER_LCORE_ID);
+ /* Test that the environment has not been set */
+ env = rte_power_get_env();
+ if (env != PM_ENV_NOT_SET) {
+ printf("Unexpectedly got a valid environment configuration\n");
return -1;
}
- ret = check_power_freqs();
- if (ret < 0)
+ /* verify that function pointers are NULL */
+ if (rte_power_freqs != NULL) {
+ printf("rte_power_freqs should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- if (total_freq_num < 2) {
- rte_power_exit(TEST_POWER_LCORE_ID);
- printf("Frequency can not be changed due to CPU itself\n");
- return 0;
}
-
- ret = check_power_get_freq();
- if (ret < 0)
- goto fail_all;
-
- ret = check_power_set_freq();
- if (ret < 0)
+ if (rte_power_get_freq != NULL) {
+ printf("rte_power_get_freq should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_down();
- if (ret < 0)
- goto fail_all;
-
- ret = check_power_freq_up();
- if (ret < 0)
+ }
+ if (rte_power_set_freq != NULL) {
+ printf("rte_power_set_freq should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_max();
- if (ret < 0)
+ }
+ if (rte_power_freq_up != NULL) {
+ printf("rte_power_freq_up should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = check_power_freq_min();
- if (ret < 0)
+ }
+ if (rte_power_freq_down != NULL) {
+ printf("rte_power_freq_down should be NULL, environment has not been "
+ "initialised\n");
goto fail_all;
-
- ret = rte_power_exit(TEST_POWER_LCORE_ID);
- if (ret < 0) {
- printf("Cannot exit power management for lcore %u\n",
- TEST_POWER_LCORE_ID);
- return -1;
}
-
- /**
- * test of exiting power management for the lcore which has been exited
- */
- ret = rte_power_exit(TEST_POWER_LCORE_ID);
- if (ret == 0) {
- printf("Unexpectedly exit successfully power management twice "
- "on lcore %u\n", TEST_POWER_LCORE_ID);
- return -1;
+ if (rte_power_freq_max != NULL) {
+ printf("rte_power_freq_max should be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
}
-
- /* test of exit power management for an invalid lcore */
- ret = rte_power_exit(TEST_POWER_LCORE_INVALID);
- if (ret == 0) {
- printf("Unpectedly exit power management successfully for "
- "lcore %u\n", TEST_POWER_LCORE_INVALID);
- return -1;
+ if (rte_power_freq_min != NULL) {
+ printf("rte_power_freq_min should be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
}
-
+ rte_power_unset_env();
return 0;
-
fail_all:
- rte_power_exit(TEST_POWER_LCORE_ID);
-
+ rte_power_unset_env();
return -1;
}
diff --git a/app/test/test_power_acpi_cpufreq.c b/app/test/test_power_acpi_cpufreq.c
new file mode 100644
index 0000000..8848d75
--- /dev/null
+++ b/app/test/test_power_acpi_cpufreq.c
@@ -0,0 +1,544 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <limits.h>
+#include <string.h>
+
+#include "test.h"
+
+#include <rte_power.h>
+
+#define TEST_POWER_LCORE_ID 2U
+#define TEST_POWER_LCORE_INVALID ((unsigned)RTE_MAX_LCORE)
+#define TEST_POWER_FREQS_NUM_MAX ((unsigned)RTE_MAX_LCORE_FREQS)
+
+#define TEST_POWER_SYSFILE_CUR_FREQ \
+ "/sys/devices/system/cpu/cpu%u/cpufreq/scaling_cur_freq"
+
+static uint32_t total_freq_num;
+static uint32_t freqs[TEST_POWER_FREQS_NUM_MAX];
+
+static int
+check_cur_freq(unsigned lcore_id, uint32_t idx)
+{
+#define TEST_POWER_CONVERT_TO_DECIMAL 10
+ FILE *f;
+ char fullpath[PATH_MAX];
+ char buf[BUFSIZ];
+ uint32_t cur_freq;
+ int ret = -1;
+
+ if (snprintf(fullpath, sizeof(fullpath),
+ TEST_POWER_SYSFILE_CUR_FREQ, lcore_id) < 0) {
+ return 0;
+ }
+ f = fopen(fullpath, "r");
+ if (f == NULL) {
+ return 0;
+ }
+ if (fgets(buf, sizeof(buf), f) == NULL) {
+ goto fail_get_cur_freq;
+ }
+ cur_freq = strtoul(buf, NULL, TEST_POWER_CONVERT_TO_DECIMAL);
+ ret = (freqs[idx] == cur_freq ? 0 : -1);
+
+fail_get_cur_freq:
+ fclose(f);
+
+ return ret;
+}
+
+/* Check rte_power_freqs() */
+static int
+check_power_freqs(void)
+{
+ uint32_t ret;
+
+ total_freq_num = 0;
+ memset(freqs, 0, sizeof(freqs));
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freqs(TEST_POWER_LCORE_INVALID, freqs,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* test with NULL buffer to save available freqs */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, NULL,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully with "
+ "NULL buffer on lcore %u\n", TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* test of getting zero number of freqs */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs, 0);
+ if (ret > 0) {
+ printf("Unexpectedly get available freqs successfully with "
+ "zero buffer size on lcore %u\n", TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* test with all valid input parameters */
+ ret = rte_power_freqs(TEST_POWER_LCORE_ID, freqs,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret == 0 || ret > TEST_POWER_FREQS_NUM_MAX) {
+ printf("Fail to get available freqs on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Save the total number of available freqs */
+ total_freq_num = ret;
+
+ return 0;
+}
+
+/* Check rte_power_get_freq() */
+static int
+check_power_get_freq(void)
+{
+ int ret;
+ uint32_t count;
+
+ /* test with an invalid lcore id */
+ count = rte_power_get_freq(TEST_POWER_LCORE_INVALID);
+ if (count < TEST_POWER_FREQS_NUM_MAX) {
+ printf("Unexpectedly get freq index successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ count = rte_power_get_freq(TEST_POWER_LCORE_ID);
+ if (count >= TEST_POWER_FREQS_NUM_MAX) {
+ printf("Fail to get the freq index on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, count);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_set_freq() */
+static int
+check_power_set_freq(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_INVALID, 0);
+ if (ret >= 0) {
+ printf("Unexpectedly set freq index successfully on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* test with an invalid freq index */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID,
+ TEST_POWER_FREQS_NUM_MAX);
+ if (ret >= 0) {
+ printf("Unexpectedly set an invalid freq index (%u)"
+ "successfully on lcore %u\n", TEST_POWER_FREQS_NUM_MAX,
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /**
+ * test with an invalid freq index which is right one bigger than
+ * total number of freqs
+ */
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num);
+ if (ret >= 0) {
+ printf("Unexpectedly set an invalid freq index (%u)"
+ "successfully on lcore %u\n", total_freq_num,
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_set_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0) {
+ printf("Fail to set freq index on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_down() */
+static int
+check_power_freq_down(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_down(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale down successfully the freq on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Scale down to min and then scale down one step */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ /* Scale up to max and then scale down one step */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_down(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf ("Fail to scale down the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_up() */
+static int
+check_power_freq_up(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_up(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale up successfully the freq on %u\n",
+ TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+
+ /* Scale down to min and then scale up one step */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 2);
+ if (ret < 0)
+ return -1;
+
+ /* Scale up to max and then scale up one step */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+ ret = rte_power_freq_up(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_max() */
+static int
+check_power_freq_max(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_max(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale up successfully the freq to max on "
+ "lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+ ret = rte_power_freq_max(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale up the freq to max on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, 0);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+/* Check rte_power_freq_min() */
+static int
+check_power_freq_min(void)
+{
+ int ret;
+
+ /* test with an invalid lcore id */
+ ret = rte_power_freq_min(TEST_POWER_LCORE_INVALID);
+ if (ret >= 0) {
+ printf("Unexpectedly scale down successfully the freq to min "
+ "on lcore %u\n", TEST_POWER_LCORE_INVALID);
+ return -1;
+ }
+ ret = rte_power_freq_min(TEST_POWER_LCORE_ID);
+ if (ret < 0) {
+ printf("Fail to scale down the freq to min on lcore %u\n",
+ TEST_POWER_LCORE_ID);
+ return -1;
+ }
+
+ /* Check the current frequency */
+ ret = check_cur_freq(TEST_POWER_LCORE_ID, total_freq_num - 1);
+ if (ret < 0)
+ return -1;
+
+ return 0;
+}
+
+static int
+test_power_acpi_cpufreq(void)
+{
+ int ret = -1;
+ enum power_management_env env;
+
+ ret = rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+ if (ret != 0) {
+ printf("Failed on setting environment to PM_ENV_ACPI_CPUFREQ, this "
+ "may occur if environment is not configured correctly or "
+ " operating in another valid Power management environment\n");
+ return -1;
+ }
+
+ /* Test environment configuration */
+ env = rte_power_get_env();
+ if (env != PM_ENV_ACPI_CPUFREQ) {
+ printf("Unexpectedly got an environment other than ACPI cpufreq\n");
+ goto fail_all;
+ }
+
+ /* verify that function pointers are not NULL */
+ if (rte_power_freqs == NULL) {
+ printf("rte_power_freqs should not be NULL, environment has not been "
+ "initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_get_freq == NULL) {
+ printf("rte_power_get_freq should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_set_freq == NULL) {
+ printf("rte_power_set_freq should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_up == NULL) {
+ printf("rte_power_freq_up should not be NULL, environment has not "
+ "been initialised\n");
+ goto fail_all;
+ }
+ if (rte_power_freq_down == NULL) {
+ printf("rte_power_freq_down should not be NULL, environment has not "
+ "been initialised\n")