* [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD
@ 2021-06-11 6:58 Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
` (18 more replies)
0 siblings, 19 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Haiyue Wang
When LTS 20.11 was released, the Intel ice PMD has a basic VLAN offload,
which can only handle single VLAN mode for firmware limitation. Now the
firmware is updated to support double VLAN mode and single VLAN mode at
the same time. It depends on the driver to do selection at the boot time.
As VLAN protocol handling like strip, filter, flow is very common use, we
request to support the ice PMD can run on the latest firmware for enabling
the new design. This is compatible backport as the main tree.
Haiyue Wang (4):
net/ice/base: do not set VLAN mode in DCF mode
net/ice: fix VLAN strip for double VLAN
net/ice: fix VLAN 0 adding based on VLAN mode
net/ice: update QinQ switch filter handling
Junfeng Guo (1):
net/ice: enable QinQ filter for switch
Qi Zhang (12):
net/ice/base: align add VSI and update VSI AQ command buffer
net/ice/base: add interface to support configuring VLAN mode
net/ice/base: fix outer VLAN related macro
net/ice/base: add VLAN TPID for VLAN filters
net/ice/base: support checking double VLAN mode
net/ice/base: support configuring device in double VLAN mode
net/ice/base: update boost TCAM for DVM
net/ice/base: change protocol ID for VLAN in DVM
net/ice/base: refactor post DDP download VLAN mode config
net/ice/base: log if DDP/FW do not support QinQ
net/ice/base: add inner VLAN protocol type for QinQ filter
net/ice/base: fix QinQ PPPoE dummy packet selection
Yuying Zhang (1):
net/ice/base: add ethertype offset for QinQ dummy packet
drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
drivers/net/ice/base/ice_bitops.h | 45 +++
drivers/net/ice/base/ice_common.c | 38 ++
drivers/net/ice/base/ice_common.h | 4 +
drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
drivers/net/ice/base/ice_flex_pipe.h | 12 +
drivers/net/ice/base/ice_flex_type.h | 39 ++
drivers/net/ice/base/ice_protocol_type.h | 1 +
drivers/net/ice/base/ice_switch.c | 124 +++++-
drivers/net/ice/base/ice_switch.h | 15 +
drivers/net/ice/base/ice_type.h | 4 +
drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
drivers/net/ice/base/ice_vlan_mode.h | 16 +
drivers/net/ice/base/meson.build | 1 +
drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
drivers/net/ice/ice_ethdev.h | 10 +-
drivers/net/ice/ice_generic_flow.c | 8 +
drivers/net/ice/ice_generic_flow.h | 1 +
drivers/net/ice/ice_switch_filter.c | 114 +++++-
19 files changed, 1545 insertions(+), 363 deletions(-)
create mode 100644 drivers/net/ice/base/ice_vlan_mode.c
create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 01/18] net/ice/base: align add VSI and update VSI AQ command buffer
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 02/18] net/ice/base: add interface to support configuring VLAN mode Haiyue Wang
` (17 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Shay Amir, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 9ea028123a0bef9f6bbf5dd1a5250b9bfa63c1ea ]
Aligned the buffer the following admin commands to their new
definitions:
* 0x210 = add_vsi
* 0x211 = update_vsi
Signed-off-by: Shay Amir <shay.amir@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 209 +++++++++++++-------------
drivers/net/ice/ice_ethdev.c | 88 +++++------
2 files changed, 152 insertions(+), 145 deletions(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index f715fb0910..91d360be62 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -411,144 +411,151 @@ struct ice_aqc_vsi_props {
#define ICE_AQ_VSI_SW_FLAG_SRC_PRUNE BIT(7)
u8 sw_flags2;
#define ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_S 0
-#define ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_M \
- (0xF << ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_S)
+#define ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_M (0xF << ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_S)
#define ICE_AQ_VSI_SW_FLAG_RX_VLAN_PRUNE_ENA BIT(0)
#define ICE_AQ_VSI_SW_FLAG_LAN_ENA BIT(4)
u8 veb_stat_id;
#define ICE_AQ_VSI_SW_VEB_STAT_ID_S 0
-#define ICE_AQ_VSI_SW_VEB_STAT_ID_M (0x1F << ICE_AQ_VSI_SW_VEB_STAT_ID_S)
+#define ICE_AQ_VSI_SW_VEB_STAT_ID_M (0x1F << ICE_AQ_VSI_SW_VEB_STAT_ID_S)
#define ICE_AQ_VSI_SW_VEB_STAT_ID_VALID BIT(5)
/* security section */
u8 sec_flags;
#define ICE_AQ_VSI_SEC_FLAG_ALLOW_DEST_OVRD BIT(0)
#define ICE_AQ_VSI_SEC_FLAG_ENA_MAC_ANTI_SPOOF BIT(2)
-#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S 4
-#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_M (0xF << ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S)
+#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S 4
+#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_M (0xF << ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S)
#define ICE_AQ_VSI_SEC_TX_VLAN_PRUNE_ENA BIT(0)
u8 sec_reserved;
/* VLAN section */
- __le16 pvid; /* VLANS include priority bits */
- u8 pvlan_reserved[2];
- u8 vlan_flags;
-#define ICE_AQ_VSI_VLAN_MODE_S 0
-#define ICE_AQ_VSI_VLAN_MODE_M (0x3 << ICE_AQ_VSI_VLAN_MODE_S)
-#define ICE_AQ_VSI_VLAN_MODE_UNTAGGED 0x1
-#define ICE_AQ_VSI_VLAN_MODE_TAGGED 0x2
-#define ICE_AQ_VSI_VLAN_MODE_ALL 0x3
-#define ICE_AQ_VSI_PVLAN_INSERT_PVID BIT(2)
-#define ICE_AQ_VSI_VLAN_EMOD_S 3
-#define ICE_AQ_VSI_VLAN_EMOD_M (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_STR_BOTH (0x0 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_STR_UP (0x1 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_STR (0x2 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_NOTHING (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
- u8 pvlan_reserved2[3];
+ __le16 port_based_inner_vlan; /* VLANS include priority bits */
+ u8 inner_vlan_reserved[2];
+ u8 inner_vlan_flags;
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_S 0
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_M (0x3 << ICE_AQ_VSI_INNER_VLAN_TX_MODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTUNTAGGED 0x1
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTTAGGED 0x2
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL 0x3
+#define ICE_AQ_VSI_INNER_VLAN_INSERT_PVID BIT(2)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_S 3
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_M (0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH (0x0 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_UP (0x1 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR (0x2 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING (0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_BLOCK_TX_DESC BIT(5)
+ u8 inner_vlan_reserved2[3];
/* ingress egress up sections */
__le32 ingress_table; /* bitmap, 3 bits per up */
-#define ICE_AQ_VSI_UP_TABLE_UP0_S 0
-#define ICE_AQ_VSI_UP_TABLE_UP0_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP0_S)
-#define ICE_AQ_VSI_UP_TABLE_UP1_S 3
-#define ICE_AQ_VSI_UP_TABLE_UP1_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP1_S)
-#define ICE_AQ_VSI_UP_TABLE_UP2_S 6
-#define ICE_AQ_VSI_UP_TABLE_UP2_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP2_S)
-#define ICE_AQ_VSI_UP_TABLE_UP3_S 9
-#define ICE_AQ_VSI_UP_TABLE_UP3_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP3_S)
-#define ICE_AQ_VSI_UP_TABLE_UP4_S 12
-#define ICE_AQ_VSI_UP_TABLE_UP4_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP4_S)
-#define ICE_AQ_VSI_UP_TABLE_UP5_S 15
-#define ICE_AQ_VSI_UP_TABLE_UP5_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP5_S)
-#define ICE_AQ_VSI_UP_TABLE_UP6_S 18
-#define ICE_AQ_VSI_UP_TABLE_UP6_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP6_S)
-#define ICE_AQ_VSI_UP_TABLE_UP7_S 21
-#define ICE_AQ_VSI_UP_TABLE_UP7_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP7_S)
+#define ICE_AQ_VSI_UP_TABLE_UP0_S 0
+#define ICE_AQ_VSI_UP_TABLE_UP0_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP0_S)
+#define ICE_AQ_VSI_UP_TABLE_UP1_S 3
+#define ICE_AQ_VSI_UP_TABLE_UP1_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP1_S)
+#define ICE_AQ_VSI_UP_TABLE_UP2_S 6
+#define ICE_AQ_VSI_UP_TABLE_UP2_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP2_S)
+#define ICE_AQ_VSI_UP_TABLE_UP3_S 9
+#define ICE_AQ_VSI_UP_TABLE_UP3_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP3_S)
+#define ICE_AQ_VSI_UP_TABLE_UP4_S 12
+#define ICE_AQ_VSI_UP_TABLE_UP4_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP4_S)
+#define ICE_AQ_VSI_UP_TABLE_UP5_S 15
+#define ICE_AQ_VSI_UP_TABLE_UP5_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP5_S)
+#define ICE_AQ_VSI_UP_TABLE_UP6_S 18
+#define ICE_AQ_VSI_UP_TABLE_UP6_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP6_S)
+#define ICE_AQ_VSI_UP_TABLE_UP7_S 21
+#define ICE_AQ_VSI_UP_TABLE_UP7_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP7_S)
__le32 egress_table; /* same defines as for ingress table */
/* outer tags section */
- __le16 outer_tag;
- u8 outer_tag_flags;
-#define ICE_AQ_VSI_OUTER_TAG_MODE_S 0
-#define ICE_AQ_VSI_OUTER_TAG_MODE_M (0x3 << ICE_AQ_VSI_OUTER_TAG_MODE_S)
-#define ICE_AQ_VSI_OUTER_TAG_NOTHING 0x0
-#define ICE_AQ_VSI_OUTER_TAG_REMOVE 0x1
-#define ICE_AQ_VSI_OUTER_TAG_COPY 0x2
-#define ICE_AQ_VSI_OUTER_TAG_TYPE_S 2
-#define ICE_AQ_VSI_OUTER_TAG_TYPE_M (0x3 << ICE_AQ_VSI_OUTER_TAG_TYPE_S)
-#define ICE_AQ_VSI_OUTER_TAG_NONE 0x0
-#define ICE_AQ_VSI_OUTER_TAG_STAG 0x1
-#define ICE_AQ_VSI_OUTER_TAG_VLAN_8100 0x2
-#define ICE_AQ_VSI_OUTER_TAG_VLAN_9100 0x3
-#define ICE_AQ_VSI_OUTER_TAG_INSERT BIT(4)
-#define ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST BIT(6)
- u8 outer_tag_reserved;
+ __le16 port_based_outer_vlan;
+ u8 outer_vlan_flags;
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_S 0
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_M (0x3 << ICE_AQ_VSI_OUTER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH 0x0
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_UP 0x1
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW 0x2
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_NOTHING 0x3
+#define ICE_AQ_VSI_OUTER_TAG_TYPE_S 2
+#define ICE_AQ_VSI_OUTER_TAG_TYPE_M (0x3 << ICE_AQ_VSI_OUTER_TAG_TYPE_S)
+#define ICE_AQ_VSI_OUTER_TAG_NONE 0x0
+#define ICE_AQ_VSI_OUTER_TAG_STAG 0x1
+#define ICE_AQ_VSI_OUTER_TAG_VLAN_8100 0x2
+#define ICE_AQ_VSI_OUTER_TAG_VLAN_9100 0x3
+#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT BIT(4)
+#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST BIT(4)
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S 5
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_M (0x3 << ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S)
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ACCEPTUNTAGGED 0x1
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ACCEPTTAGGED 0x2
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ALL 0x3
+#define ICE_AQ_VSI_OUTER_VLAN_BLOCK_TX_DESC BIT(7)
+ u8 outer_vlan_reserved;
/* queue mapping section */
__le16 mapping_flags;
-#define ICE_AQ_VSI_Q_MAP_CONTIG 0x0
-#define ICE_AQ_VSI_Q_MAP_NONCONTIG BIT(0)
+#define ICE_AQ_VSI_Q_MAP_CONTIG 0x0
+#define ICE_AQ_VSI_Q_MAP_NONCONTIG BIT(0)
__le16 q_mapping[16];
-#define ICE_AQ_VSI_Q_S 0
-#define ICE_AQ_VSI_Q_M (0x7FF << ICE_AQ_VSI_Q_S)
+#define ICE_AQ_VSI_Q_S 0
+#define ICE_AQ_VSI_Q_M (0x7FF << ICE_AQ_VSI_Q_S)
__le16 tc_mapping[8];
-#define ICE_AQ_VSI_TC_Q_OFFSET_S 0
-#define ICE_AQ_VSI_TC_Q_OFFSET_M (0x7FF << ICE_AQ_VSI_TC_Q_OFFSET_S)
-#define ICE_AQ_VSI_TC_Q_NUM_S 11
-#define ICE_AQ_VSI_TC_Q_NUM_M (0xF << ICE_AQ_VSI_TC_Q_NUM_S)
+#define ICE_AQ_VSI_TC_Q_OFFSET_S 0
+#define ICE_AQ_VSI_TC_Q_OFFSET_M (0x7FF << ICE_AQ_VSI_TC_Q_OFFSET_S)
+#define ICE_AQ_VSI_TC_Q_NUM_S 11
+#define ICE_AQ_VSI_TC_Q_NUM_M (0xF << ICE_AQ_VSI_TC_Q_NUM_S)
/* queueing option section */
u8 q_opt_rss;
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_S 0
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_LUT_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_VSI 0x0
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_PF 0x2
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_GBL 0x3
-#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S 2
-#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_M (0xF << ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_HASH_S 6
-#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_TPLZ (0x0 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_SYM_TPLZ (0x1 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_XOR (0x2 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_JHASH (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_S 0
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_LUT_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_VSI 0x0
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_PF 0x2
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_GBL 0x3
+#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S 2
+#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_M (0xF << ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_HASH_S 6
+#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_TPLZ (0x0 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_SYM_TPLZ (0x1 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_XOR (0x2 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_JHASH (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
u8 q_opt_tc;
-#define ICE_AQ_VSI_Q_OPT_TC_OVR_S 0
-#define ICE_AQ_VSI_Q_OPT_TC_OVR_M (0x1F << ICE_AQ_VSI_Q_OPT_TC_OVR_S)
-#define ICE_AQ_VSI_Q_OPT_PROF_TC_OVR BIT(7)
+#define ICE_AQ_VSI_Q_OPT_TC_OVR_S 0
+#define ICE_AQ_VSI_Q_OPT_TC_OVR_M (0x1F << ICE_AQ_VSI_Q_OPT_TC_OVR_S)
+#define ICE_AQ_VSI_Q_OPT_PROF_TC_OVR BIT(7)
u8 q_opt_flags;
-#define ICE_AQ_VSI_Q_OPT_PE_FLTR_EN BIT(0)
+#define ICE_AQ_VSI_Q_OPT_PE_FLTR_EN BIT(0)
u8 q_opt_reserved[3];
/* outer up section */
__le32 outer_up_table; /* same structure and defines as ingress tbl */
/* ACL section */
__le16 acl_def_act;
-#define ICE_AQ_VSI_ACL_DEF_RX_PROF_S 0
-#define ICE_AQ_VSI_ACL_DEF_RX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_PROF_S)
-#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_S 4
-#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_TABLE_S)
-#define ICE_AQ_VSI_ACL_DEF_TX_PROF_S 8
-#define ICE_AQ_VSI_ACL_DEF_TX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_PROF_S)
-#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_S 12
-#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_TABLE_S)
+#define ICE_AQ_VSI_ACL_DEF_RX_PROF_S 0
+#define ICE_AQ_VSI_ACL_DEF_RX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_PROF_S)
+#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_S 4
+#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_TABLE_S)
+#define ICE_AQ_VSI_ACL_DEF_TX_PROF_S 8
+#define ICE_AQ_VSI_ACL_DEF_TX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_PROF_S)
+#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_S 12
+#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_TABLE_S)
/* flow director section */
__le16 fd_options;
-#define ICE_AQ_VSI_FD_ENABLE BIT(0)
-#define ICE_AQ_VSI_FD_TX_AUTO_ENABLE BIT(1)
-#define ICE_AQ_VSI_FD_PROG_ENABLE BIT(3)
+#define ICE_AQ_VSI_FD_ENABLE BIT(0)
+#define ICE_AQ_VSI_FD_TX_AUTO_ENABLE BIT(1)
+#define ICE_AQ_VSI_FD_PROG_ENABLE BIT(3)
__le16 max_fd_fltr_dedicated;
__le16 max_fd_fltr_shared;
__le16 fd_def_q;
-#define ICE_AQ_VSI_FD_DEF_Q_S 0
-#define ICE_AQ_VSI_FD_DEF_Q_M (0x7FF << ICE_AQ_VSI_FD_DEF_Q_S)
-#define ICE_AQ_VSI_FD_DEF_GRP_S 12
-#define ICE_AQ_VSI_FD_DEF_GRP_M (0x7 << ICE_AQ_VSI_FD_DEF_GRP_S)
+#define ICE_AQ_VSI_FD_DEF_Q_S 0
+#define ICE_AQ_VSI_FD_DEF_Q_M (0x7FF << ICE_AQ_VSI_FD_DEF_Q_S)
+#define ICE_AQ_VSI_FD_DEF_GRP_S 12
+#define ICE_AQ_VSI_FD_DEF_GRP_M (0x7 << ICE_AQ_VSI_FD_DEF_GRP_S)
__le16 fd_report_opt;
-#define ICE_AQ_VSI_FD_REPORT_Q_S 0
-#define ICE_AQ_VSI_FD_REPORT_Q_M (0x7FF << ICE_AQ_VSI_FD_REPORT_Q_S)
-#define ICE_AQ_VSI_FD_DEF_PRIORITY_S 12
-#define ICE_AQ_VSI_FD_DEF_PRIORITY_M (0x7 << ICE_AQ_VSI_FD_DEF_PRIORITY_S)
-#define ICE_AQ_VSI_FD_DEF_DROP BIT(15)
+#define ICE_AQ_VSI_FD_REPORT_Q_S 0
+#define ICE_AQ_VSI_FD_REPORT_Q_M (0x7FF << ICE_AQ_VSI_FD_REPORT_Q_S)
+#define ICE_AQ_VSI_FD_DEF_PRIORITY_S 12
+#define ICE_AQ_VSI_FD_DEF_PRIORITY_M (0x7 << ICE_AQ_VSI_FD_DEF_PRIORITY_S)
+#define ICE_AQ_VSI_FD_DEF_DROP BIT(15)
/* PASID section */
__le32 pasid_id;
-#define ICE_AQ_VSI_PASID_ID_S 0
-#define ICE_AQ_VSI_PASID_ID_M (0xFFFFF << ICE_AQ_VSI_PASID_ID_S)
-#define ICE_AQ_VSI_PASID_ID_VALID BIT(31)
+#define ICE_AQ_VSI_PASID_ID_S 0
+#define ICE_AQ_VSI_PASID_ID_M (0xFFFFF << ICE_AQ_VSI_PASID_ID_S)
+#define ICE_AQ_VSI_PASID_ID_VALID BIT(31)
u8 reserved[24];
};
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index f30199fc23..7f78cd36cd 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -1131,28 +1131,28 @@ ice_vsi_config_qinq_insertion(struct ice_vsi *vsi, bool on)
if (vsi->info.valid_sections &
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
if (on) {
- if ((vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST) ==
- ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST)
+ if ((vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST) ==
+ ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST)
return 0; /* already on */
} else {
- if (!(vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST))
+ if (!(vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST))
return 0; /* already off */
}
}
if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST;
+ qinq_flags = ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST;
else
qinq_flags = 0;
/* clear global insertion and use per packet insertion */
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_INSERT);
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST);
- vsi->info.outer_tag_flags |= qinq_flags;
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT);
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST);
+ vsi->info.outer_vlan_flags |= qinq_flags;
/* use default vlan type 0x8100 */
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_tag_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
+ vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
ICE_AQ_VSI_OUTER_TAG_TYPE_S;
(void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
@@ -1184,27 +1184,27 @@ ice_vsi_config_qinq_stripping(struct ice_vsi *vsi, bool on)
if (vsi->info.valid_sections &
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
if (on) {
- if ((vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_MODE_M) ==
- ICE_AQ_VSI_OUTER_TAG_COPY)
+ if ((vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW)
return 0; /* already on */
} else {
- if ((vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_MODE_M) ==
- ICE_AQ_VSI_OUTER_TAG_NOTHING)
+ if ((vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH)
return 0; /* already off */
}
}
if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_TAG_COPY;
+ qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW;
else
- qinq_flags = ICE_AQ_VSI_OUTER_TAG_NOTHING;
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_MODE_M);
- vsi->info.outer_tag_flags |= qinq_flags;
+ qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH;
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_EMODE_M);
+ vsi->info.outer_vlan_flags |= qinq_flags;
/* use default vlan type 0x8100 */
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_tag_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
+ vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
ICE_AQ_VSI_OUTER_TAG_TYPE_S;
(void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
@@ -1582,8 +1582,8 @@ ice_setup_vsi(struct ice_pf *pf, enum ice_vsi_type type)
vsi_ctx.info.sw_id = hw->port_info->sw_id;
vsi_ctx.info.sw_flags2 = ICE_AQ_VSI_SW_FLAG_LAN_ENA;
/* Allow all untagged or tagged packets */
- vsi_ctx.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_ALL;
- vsi_ctx.info.vlan_flags |= ICE_AQ_VSI_VLAN_EMOD_NOTHING;
+ vsi_ctx.info.inner_vlan_flags = ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
+ vsi_ctx.info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
vsi_ctx.info.q_opt_rss = ICE_AQ_VSI_Q_OPT_RSS_LUT_PF |
ICE_AQ_VSI_Q_OPT_RSS_TPLZ;
@@ -4101,24 +4101,24 @@ ice_vsi_config_vlan_stripping(struct ice_vsi *vsi, bool on)
if (vsi->info.valid_sections &
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID)) {
if (on) {
- if ((vsi->info.vlan_flags &
- ICE_AQ_VSI_VLAN_EMOD_M) ==
- ICE_AQ_VSI_VLAN_EMOD_STR_BOTH)
+ if ((vsi->info.inner_vlan_flags &
+ ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH)
return 0; /* already on */
} else {
- if ((vsi->info.vlan_flags &
- ICE_AQ_VSI_VLAN_EMOD_M) ==
- ICE_AQ_VSI_VLAN_EMOD_NOTHING)
+ if ((vsi->info.inner_vlan_flags &
+ ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING)
return 0; /* already off */
}
}
if (on)
- vlan_flags = ICE_AQ_VSI_VLAN_EMOD_STR_BOTH;
+ vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
else
- vlan_flags = ICE_AQ_VSI_VLAN_EMOD_NOTHING;
- vsi->info.vlan_flags &= ~(ICE_AQ_VSI_VLAN_EMOD_M);
- vsi->info.vlan_flags |= vlan_flags;
+ vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+ vsi->info.inner_vlan_flags &= ~(ICE_AQ_VSI_INNER_VLAN_EMODE_M);
+ vsi->info.inner_vlan_flags |= vlan_flags;
(void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
@@ -4602,24 +4602,24 @@ ice_vsi_vlan_pvid_set(struct ice_vsi *vsi, struct ice_vsi_vlan_pvid_info *info)
}
if (info->on) {
- vsi->info.pvid = info->config.pvid;
+ vsi->info.port_based_inner_vlan = info->config.pvid;
/**
* If insert pvid is enabled, only tagged pkts are
* allowed to be sent out.
*/
- vlan_flags = ICE_AQ_VSI_PVLAN_INSERT_PVID |
- ICE_AQ_VSI_VLAN_MODE_UNTAGGED;
+ vlan_flags = ICE_AQ_VSI_INNER_VLAN_INSERT_PVID |
+ ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTUNTAGGED;
} else {
- vsi->info.pvid = 0;
+ vsi->info.port_based_inner_vlan = 0;
if (info->config.reject.tagged == 0)
- vlan_flags |= ICE_AQ_VSI_VLAN_MODE_TAGGED;
+ vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTTAGGED;
if (info->config.reject.untagged == 0)
- vlan_flags |= ICE_AQ_VSI_VLAN_MODE_UNTAGGED;
+ vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTUNTAGGED;
}
- vsi->info.vlan_flags &= ~(ICE_AQ_VSI_PVLAN_INSERT_PVID |
- ICE_AQ_VSI_VLAN_MODE_M);
- vsi->info.vlan_flags |= vlan_flags;
+ vsi->info.inner_vlan_flags &= ~(ICE_AQ_VSI_INNER_VLAN_INSERT_PVID |
+ ICE_AQ_VSI_INNER_VLAN_EMODE_M);
+ vsi->info.inner_vlan_flags |= vlan_flags;
memset(&ctxt, 0, sizeof(ctxt));
rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 02/18] net/ice/base: add interface to support configuring VLAN mode
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 03/18] net/ice/base: fix outer VLAN related macro Haiyue Wang
` (16 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 4e4dc21e450b5860da650d255abb6e17c3e637a9 ]
The VLAN mode of the device has to be configured while the global
configuration lock is held while downloading the DDP, specifically after
the DDP has been downloaded. In order to support this a VLAN mode
interface was added. By default the device will stay in single VLAN
mode (SVM), which is the current implementation. However, this can be
changed by implementing the .set_dvm op.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 23 ++++++++++++++
drivers/net/ice/base/ice_common.c | 40 ++++++++++++++++++++++++
drivers/net/ice/base/ice_common.h | 4 +++
drivers/net/ice/base/ice_flex_pipe.c | 7 +++++
drivers/net/ice/base/ice_type.h | 2 ++
drivers/net/ice/base/ice_vlan_mode.c | 44 +++++++++++++++++++++++++++
drivers/net/ice/base/ice_vlan_mode.h | 32 +++++++++++++++++++
drivers/net/ice/base/meson.build | 1 +
8 files changed, 153 insertions(+)
create mode 100644 drivers/net/ice/base/ice_vlan_mode.c
create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index 91d360be62..eebafee7c7 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -227,6 +227,27 @@ struct ice_aqc_get_sw_cfg_resp_elem {
#define ICE_AQC_GET_SW_CONF_RESP_IS_VF BIT(15)
};
+/* Set Port parameters, (direct, 0x0203) */
+struct ice_aqc_set_port_params {
+ __le16 cmd_flags;
+#define ICE_AQC_SET_P_PARAMS_SAVE_BAD_PACKETS BIT(0)
+#define ICE_AQC_SET_P_PARAMS_PAD_SHORT_PACKETS BIT(1)
+#define ICE_AQC_SET_P_PARAMS_DOUBLE_VLAN_ENA BIT(2)
+ __le16 bad_frame_vsi;
+#define ICE_AQC_SET_P_PARAMS_VSI_S 0
+#define ICE_AQC_SET_P_PARAMS_VSI_M (0x3FF << ICE_AQC_SET_P_PARAMS_VSI_S)
+#define ICE_AQC_SET_P_PARAMS_VSI_VALID BIT(15)
+ __le16 swid;
+#define ICE_AQC_SET_P_PARAMS_SWID_S 0
+#define ICE_AQC_SET_P_PARAMS_SWID_M (0xFF << ICE_AQC_SET_P_PARAMS_SWID_S)
+#define ICE_AQC_SET_P_PARAMS_LOGI_PORT_ID_S 8
+#define ICE_AQC_SET_P_PARAMS_LOGI_PORT_ID_M \
+ (0x3F << ICE_AQC_SET_P_PARAMS_LOGI_PORT_ID_S)
+#define ICE_AQC_SET_P_PARAMS_IS_LOGI_PORT BIT(14)
+#define ICE_AQC_SET_P_PARAMS_SWID_VALID BIT(15)
+ u8 reserved[10];
+};
+
/* These resource type defines are used for all switch resource
* commands where a resource type is required, such as:
* Get Resource Allocation command (indirect 0x0204)
@@ -2713,6 +2734,7 @@ struct ice_aq_desc {
struct ice_aqc_sff_eeprom read_write_sff_param;
struct ice_aqc_set_port_id_led set_port_id_led;
struct ice_aqc_get_sw_cfg get_sw_conf;
+ struct ice_aqc_set_port_params set_port_params;
struct ice_aqc_sw_rules sw_rules;
struct ice_aqc_storm_cfg storm_conf;
struct ice_aqc_add_get_recipe add_get_recipe;
@@ -2876,6 +2898,7 @@ enum ice_adminq_opc {
/* internal switch commands */
ice_aqc_opc_get_sw_cfg = 0x0200,
+ ice_aqc_opc_set_port_params = 0x0203,
/* Alloc/Free/Get Resources */
ice_aqc_opc_get_res_alloc = 0x0204,
diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c
index 304e55e210..b5f1d8cce5 100644
--- a/drivers/net/ice/base/ice_common.c
+++ b/drivers/net/ice/base/ice_common.c
@@ -830,6 +830,9 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
if (status)
goto err_unroll_fltr_mgmt_struct;
ice_init_lock(&hw->tnl_lock);
+
+ ice_init_vlan_mode_ops(hw);
+
return ICE_SUCCESS;
err_unroll_fltr_mgmt_struct:
@@ -2370,6 +2373,43 @@ void ice_clear_pxe_mode(struct ice_hw *hw)
ice_aq_clear_pxe_mode(hw);
}
+/**
+ * ice_aq_set_port_params - set physical port parameters.
+ * @pi: pointer to the port info struct
+ * @bad_frame_vsi: defines the VSI to which bad frames are forwarded
+ * @save_bad_pac: if set packets with errors are forwarded to the bad frames VSI
+ * @pad_short_pac: if set transmit packets smaller than 60 bytes are padded
+ * @double_vlan: if set double VLAN is enabled
+ * @cd: pointer to command details structure or NULL
+ *
+ * Set Physical port parameters (0x0203)
+ */
+enum ice_status
+ice_aq_set_port_params(struct ice_port_info *pi, u16 bad_frame_vsi,
+ bool save_bad_pac, bool pad_short_pac, bool double_vlan,
+ struct ice_sq_cd *cd)
+
+{
+ struct ice_aqc_set_port_params *cmd;
+ struct ice_hw *hw = pi->hw;
+ struct ice_aq_desc desc;
+ u16 cmd_flags = 0;
+
+ cmd = &desc.params.set_port_params;
+
+ ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_set_port_params);
+ cmd->bad_frame_vsi = CPU_TO_LE16(bad_frame_vsi);
+ if (save_bad_pac)
+ cmd_flags |= ICE_AQC_SET_P_PARAMS_SAVE_BAD_PACKETS;
+ if (pad_short_pac)
+ cmd_flags |= ICE_AQC_SET_P_PARAMS_PAD_SHORT_PACKETS;
+ if (double_vlan)
+ cmd_flags |= ICE_AQC_SET_P_PARAMS_DOUBLE_VLAN_ENA;
+ cmd->cmd_flags = CPU_TO_LE16(cmd_flags);
+
+ return ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
+}
+
/**
* ice_get_link_speed_based_on_phy_type - returns link speed
* @phy_type_low: lower part of phy_type
diff --git a/drivers/net/ice/base/ice_common.h b/drivers/net/ice/base/ice_common.h
index 8c16c7a024..765dc3054f 100644
--- a/drivers/net/ice/base/ice_common.h
+++ b/drivers/net/ice/base/ice_common.h
@@ -123,6 +123,10 @@ enum ice_status
ice_aq_send_driver_ver(struct ice_hw *hw, struct ice_driver_ver *dv,
struct ice_sq_cd *cd);
enum ice_status
+ice_aq_set_port_params(struct ice_port_info *pi, u16 bad_frame_vsi,
+ bool save_bad_pac, bool pad_short_pac, bool double_vlan,
+ struct ice_sq_cd *cd);
+enum ice_status
ice_aq_get_phy_caps(struct ice_port_info *pi, bool qual_mods, u8 report_mode,
struct ice_aqc_get_phy_caps_data *caps,
struct ice_sq_cd *cd);
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index d74fecbf5b..6c7f83899d 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1006,6 +1006,13 @@ ice_dwnld_cfg_bufs(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
break;
}
+ if (!status) {
+ status = ice_set_vlan_mode(hw);
+ if (status)
+ ice_debug(hw, ICE_DBG_PKG, "Failed to set VLAN mode: err %d\n",
+ status);
+ }
+
ice_release_global_cfg_lock(hw);
return status;
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index 6b8d44f0b4..996b58b743 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -57,6 +57,7 @@
#include "ice_lan_tx_rx.h"
#include "ice_flex_type.h"
#include "ice_protocol_type.h"
+#include "ice_vlan_mode.h"
/**
* ice_is_pow2 - check if integer value is a power of 2
@@ -985,6 +986,7 @@ struct ice_hw {
ice_declare_bitmap(fdir_perfect_fltr, ICE_FLTR_PTYPE_MAX);
struct ice_lock rss_locks; /* protect RSS configuration */
struct LIST_HEAD_TYPE rss_list_head;
+ struct ice_vlan_mode_ops vlan_mode_ops;
};
/* Statistics collected by each port, VSI, VEB, and S-channel */
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
new file mode 100644
index 0000000000..603de74e25
--- /dev/null
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
+
+#include "ice_vlan_mode.h"
+#include "ice_common.h"
+
+/**
+ * ice_set_svm - set single VLAN mode
+ * @hw: pointer to the HW structure
+ */
+static enum ice_status ice_set_svm_dflt(struct ice_hw *hw)
+{
+ ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
+
+ return ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+}
+
+/**
+ * ice_init_vlan_mode_ops - initialize VLAN mode configuration ops
+ * @hw: pointer to the HW structure
+ */
+void ice_init_vlan_mode_ops(struct ice_hw *hw)
+{
+ hw->vlan_mode_ops.set_dvm = NULL;
+ hw->vlan_mode_ops.set_svm = ice_set_svm_dflt;
+}
+
+/**
+ * ice_set_vlan_mode
+ * @hw: pointer to the HW structure
+ */
+enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
+{
+ enum ice_status status = ICE_ERR_NOT_IMPL;
+
+ if (hw->vlan_mode_ops.set_dvm)
+ status = hw->vlan_mode_ops.set_dvm(hw);
+
+ if (status)
+ return hw->vlan_mode_ops.set_svm(hw);
+
+ return ICE_SUCCESS;
+}
diff --git a/drivers/net/ice/base/ice_vlan_mode.h b/drivers/net/ice/base/ice_vlan_mode.h
new file mode 100644
index 0000000000..1b9db4d36f
--- /dev/null
+++ b/drivers/net/ice/base/ice_vlan_mode.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
+
+#ifndef _ICE_VLAN_MODE_H_
+#define _ICE_VLAN_MODE_H_
+
+struct ice_hw;
+
+enum ice_status ice_set_vlan_mode(struct ice_hw *hw);
+void ice_init_vlan_mode_ops(struct ice_hw *hw);
+
+/* This structure defines the VLAN mode configuration interface. It is used to set the VLAN mode.
+ *
+ * Note: These operations will be called while the global configuration lock is held.
+ *
+ * enum ice_status (*set_svm)(struct ice_hw *hw);
+ * This function is called when the DDP and/or Firmware don't support double VLAN mode (DVM) or
+ * if the set_dvm op is not implemented and/or returns failure. It will set the device in
+ * single VLAN mode (SVM).
+ *
+ * enum ice_status (*set_dvm)(struct ice_hw *hw);
+ * This function is called when the DDP and Firmware support double VLAN mode (DVM). It should
+ * be implemented to set double VLAN mode. If it fails or remains unimplemented, set_svm will
+ * be called as a fallback plan.
+ */
+struct ice_vlan_mode_ops {
+ enum ice_status (*set_svm)(struct ice_hw *hw);
+ enum ice_status (*set_dvm)(struct ice_hw *hw);
+};
+
+#endif /* _ICE_VLAN_MODE_H */
diff --git a/drivers/net/ice/base/meson.build b/drivers/net/ice/base/meson.build
index 22963ce31d..ad5e5da25b 100644
--- a/drivers/net/ice/base/meson.build
+++ b/drivers/net/ice/base/meson.build
@@ -13,6 +13,7 @@ sources = [
'ice_fdir.c',
'ice_acl.c',
'ice_acl_ctrl.c',
+ 'ice_vlan_mode.c',
]
error_cflags = ['-Wno-unused-value',
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 03/18] net/ice/base: fix outer VLAN related macro
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 02/18] net/ice/base: add interface to support configuring VLAN mode Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 04/18] net/ice/base: add VLAN TPID for VLAN filters Haiyue Wang
` (15 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 25aa214490814d14e5f8f69121c23c0b91d2aeb9 ]
Fix the wrong value of ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST
Fixes: 9ea028123a0b ("net/ice/base: align add VSI and update VSI AQ command buffer")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index eebafee7c7..c0617093d4 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -500,7 +500,7 @@ struct ice_aqc_vsi_props {
#define ICE_AQ_VSI_OUTER_TAG_VLAN_8100 0x2
#define ICE_AQ_VSI_OUTER_TAG_VLAN_9100 0x3
#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT BIT(4)
-#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST BIT(4)
+#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST BIT(6)
#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S 5
#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_M (0x3 << ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S)
#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ACCEPTUNTAGGED 0x1
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 04/18] net/ice/base: add VLAN TPID for VLAN filters
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (2 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 03/18] net/ice/base: fix outer VLAN related macro Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 05/18] net/ice/base: support checking double VLAN mode Haiyue Wang
` (14 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit a6b975d23c10756083357355372c4f545ddc1ebe ]
Currently VLAN filters via RID4 are only based on VLAN ID. However, with
incoming support for Double VLAN Mode (DVM), the driver needs to be able
to support filtering on VLAN ID + VLAN TPID (i.e. 0x8100, 0x88a8, etc.).
Add support for this by adding two fields to the ice_fltr_info
structure. First, add the tpid_valid field so the code can determine
whether or not to overwrite the default 0x8100 value for programming
packets or use the tpid field.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_switch.c | 6 ++++++
drivers/net/ice/base/ice_switch.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index e6ea04183f..8d455f5995 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -14,6 +14,7 @@
#define ICE_PPP_IPV6_PROTO_ID 0x0057
#define ICE_IPV6_ETHER_ID 0x86DD
#define ICE_TCP_PROTO_ID 0x06
+#define ICE_ETH_P_8021Q 0x8100
/* Dummy ethernet header needed in the ice_aqc_sw_rules_elem
* struct to configure any switch filter rules.
@@ -3034,6 +3035,7 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
struct ice_aqc_sw_rules_elem *s_rule, enum ice_adminq_opc opc)
{
u16 vlan_id = ICE_MAX_VLAN_ID + 1;
+ u16 vlan_tpid = ICE_ETH_P_8021Q;
void *daddr = NULL;
u16 eth_hdr_sz;
u8 *eth_hdr;
@@ -3106,6 +3108,8 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
break;
case ICE_SW_LKUP_VLAN:
vlan_id = f_info->l_data.vlan.vlan_id;
+ if (f_info->l_data.vlan.tpid_valid)
+ vlan_tpid = f_info->l_data.vlan.tpid;
if (f_info->fltr_act == ICE_FWD_TO_VSI ||
f_info->fltr_act == ICE_FWD_TO_VSI_LIST) {
act |= ICE_SINGLE_ACT_PRUNE;
@@ -3149,6 +3153,8 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
if (!(vlan_id > ICE_MAX_VLAN_ID)) {
off = (_FORCE_ __be16 *)(eth_hdr + ICE_ETH_VLAN_TCI_OFFSET);
*off = CPU_TO_BE16(vlan_id);
+ off = (_FORCE_ __be16 *)(eth_hdr + ICE_ETH_ETHTYPE_OFFSET);
+ *off = CPU_TO_BE16(vlan_tpid);
}
/* Create the switch rule with the final dummy Ethernet header */
diff --git a/drivers/net/ice/base/ice_switch.h b/drivers/net/ice/base/ice_switch.h
index be9b74fd4c..392eb369c7 100644
--- a/drivers/net/ice/base/ice_switch.h
+++ b/drivers/net/ice/base/ice_switch.h
@@ -160,6 +160,8 @@ struct ice_fltr_info {
} mac_vlan;
struct {
u16 vlan_id;
+ u16 tpid;
+ u8 tpid_valid;
} vlan;
/* Set lkup_type as ICE_SW_LKUP_ETHERTYPE
* if just using ethertype as filter. Set lkup_type as
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 05/18] net/ice/base: support checking double VLAN mode
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (3 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 04/18] net/ice/base: add VLAN TPID for VLAN filters Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 06/18] net/ice/base: support configuring device in " Haiyue Wang
` (13 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Jacob Keller, Dan Nowlin, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 67285599c9f413c59118379d1f7162031ea6acdc ]
If a driver wants to configure double VLAN mode (DVM) it needs to
first check if the DDP supports DVM. To do this the driver needs to read
the package metadata section via the upload section AQ (0x04C1).
If the DDP doesn't support configuring double VLAN mode (DVM), then
there is nothing to do regarding configuring the VLAN mode of the
device.
The set_svm() or set_dvm() ops should only be called if the current
configuration supports configuring the VLAN mode of the device.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_bitops.h | 45 ++++++++++++++++
drivers/net/ice/base/ice_flex_pipe.c | 63 +++++++++++++++++++++-
drivers/net/ice/base/ice_flex_pipe.h | 11 ++++
drivers/net/ice/base/ice_flex_type.h | 26 ++++++++++
drivers/net/ice/base/ice_vlan_mode.c | 78 ++++++++++++++++++++++++++++
5 files changed, 221 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ice/base/ice_bitops.h b/drivers/net/ice/base/ice_bitops.h
index 39548967cc..b786bf7a18 100644
--- a/drivers/net/ice/base/ice_bitops.h
+++ b/drivers/net/ice/base/ice_bitops.h
@@ -449,4 +449,49 @@ ice_cmp_bitmap(ice_bitmap_t *bmp1, ice_bitmap_t *bmp2, u16 size)
return true;
}
+/**
+ * ice_bitmap_from_array32 - copies u32 array source into bitmap destination
+ * @dst: the destination bitmap
+ * @src: the source u32 array
+ * @size: size of the bitmap (in bits)
+ *
+ * This function copies the src bitmap stored in an u32 array into the dst
+ * bitmap stored as an ice_bitmap_t.
+ */
+static inline void
+ice_bitmap_from_array32(ice_bitmap_t *dst, u32 *src, u16 size)
+{
+ u32 remaining_bits, i;
+
+#define BITS_PER_U32 (sizeof(u32) * BITS_PER_BYTE)
+ /* clear bitmap so we only have to set when iterating */
+ ice_zero_bitmap(dst, size);
+
+ for (i = 0; i < (u32)(size / BITS_PER_U32); i++) {
+ u32 bit_offset = i * BITS_PER_U32;
+ u32 entry = src[i];
+ u32 j;
+
+ for (j = 0; j < BITS_PER_U32; j++) {
+ if (entry & BIT(j))
+ ice_set_bit((u16)(j + bit_offset), dst);
+ }
+ }
+
+ /* still need to check the leftover bits (i.e. if size isn't evenly
+ * divisible by BITS_PER_U32
+ **/
+ remaining_bits = size % BITS_PER_U32;
+ if (remaining_bits) {
+ u32 bit_offset = i * BITS_PER_U32;
+ u32 entry = src[i];
+ u32 j;
+
+ for (j = 0; j < remaining_bits; j++) {
+ if (entry & BIT(j))
+ ice_set_bit((u16)(j + bit_offset), dst);
+ }
+ }
+}
+
#endif /* _ICE_BITOPS_H_ */
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index 6c7f83899d..e511b50a00 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -807,6 +807,28 @@ ice_aq_download_pkg(struct ice_hw *hw, struct ice_buf_hdr *pkg_buf,
return status;
}
+/**
+ * ice_aq_upload_section
+ * @hw: pointer to the hardware structure
+ * @pkg_buf: the package buffer which will receive the section
+ * @buf_size: the size of the package buffer
+ * @cd: pointer to command details structure or NULL
+ *
+ * Upload Section (0x0C41)
+ */
+enum ice_status
+ice_aq_upload_section(struct ice_hw *hw, struct ice_buf_hdr *pkg_buf,
+ u16 buf_size, struct ice_sq_cd *cd)
+{
+ struct ice_aq_desc desc;
+
+ ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
+ ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_upload_section);
+ desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD);
+
+ return ice_aq_send_cmd(hw, &desc, pkg_buf, buf_size, cd);
+}
+
/**
* ice_aq_update_pkg
* @hw: pointer to the hardware structure
@@ -1800,7 +1822,7 @@ void ice_init_prof_result_bm(struct ice_hw *hw)
*
* Frees a package buffer
*/
-static void ice_pkg_buf_free(struct ice_hw *hw, struct ice_buf_build *bld)
+void ice_pkg_buf_free(struct ice_hw *hw, struct ice_buf_build *bld)
{
ice_free(hw, bld);
}
@@ -1899,6 +1921,43 @@ ice_pkg_buf_alloc_section(struct ice_buf_build *bld, u32 type, u16 size)
return NULL;
}
+/**
+ * ice_pkg_buf_alloc_single_section
+ * @hw: pointer to the HW structure
+ * @type: the section type value
+ * @size: the size of the section to reserve (in bytes)
+ * @section: returns pointer to the section
+ *
+ * Allocates a package buffer with a single section.
+ * Note: all package contents must be in Little Endian form.
+ */
+struct ice_buf_build *
+ice_pkg_buf_alloc_single_section(struct ice_hw *hw, u32 type, u16 size,
+ void **section)
+{
+ struct ice_buf_build *buf;
+
+ if (!section)
+ return NULL;
+
+ buf = ice_pkg_buf_alloc(hw);
+ if (!buf)
+ return NULL;
+
+ if (ice_pkg_buf_reserve_section(buf, 1))
+ goto ice_pkg_buf_alloc_single_section_err;
+
+ *section = ice_pkg_buf_alloc_section(buf, type, size);
+ if (!*section)
+ goto ice_pkg_buf_alloc_single_section_err;
+
+ return buf;
+
+ice_pkg_buf_alloc_single_section_err:
+ ice_pkg_buf_free(hw, buf);
+ return NULL;
+}
+
/**
* ice_pkg_buf_get_active_sections
* @bld: pointer to pkg build (allocated by ice_pkg_buf_alloc())
@@ -1926,7 +1985,7 @@ static u16 ice_pkg_buf_get_active_sections(struct ice_buf_build *bld)
*
* Return a pointer to the buffer's header
*/
-static struct ice_buf *ice_pkg_buf(struct ice_buf_build *bld)
+struct ice_buf *ice_pkg_buf(struct ice_buf_build *bld)
{
if (!bld)
return NULL;
diff --git a/drivers/net/ice/base/ice_flex_pipe.h b/drivers/net/ice/base/ice_flex_pipe.h
index 214c7a2837..d4679cc940 100644
--- a/drivers/net/ice/base/ice_flex_pipe.h
+++ b/drivers/net/ice/base/ice_flex_pipe.h
@@ -38,6 +38,12 @@ ice_init_prof_result_bm(struct ice_hw *hw);
enum ice_status
ice_get_sw_fv_list(struct ice_hw *hw, u8 *prot_ids, u16 ids_cnt,
ice_bitmap_t *bm, struct LIST_HEAD_TYPE *fv_list);
+enum ice_status
+ice_pkg_buf_unreserve_section(struct ice_buf_build *bld, u16 count);
+u16 ice_pkg_buf_get_free_space(struct ice_buf_build *bld);
+enum ice_status
+ice_aq_upload_section(struct ice_hw *hw, struct ice_buf_hdr *pkg_buf,
+ u16 buf_size, struct ice_sq_cd *cd);
bool
ice_get_open_tunnel_port(struct ice_hw *hw, enum ice_tunnel_type type,
u16 *port);
@@ -75,6 +81,11 @@ void ice_clear_hw_tbls(struct ice_hw *hw);
void ice_free_hw_tbls(struct ice_hw *hw);
enum ice_status
ice_rem_prof(struct ice_hw *hw, enum ice_block blk, u64 id);
+struct ice_buf_build *
+ice_pkg_buf_alloc_single_section(struct ice_hw *hw, u32 type, u16 size,
+ void **section);
+struct ice_buf *ice_pkg_buf(struct ice_buf_build *bld);
+void ice_pkg_buf_free(struct ice_hw *hw, struct ice_buf_build *bld);
enum ice_status
ice_set_key(u8 *key, u16 size, u8 *val, u8 *upd, u8 *dc, u8 *nm, u16 off,
diff --git a/drivers/net/ice/base/ice_flex_type.h b/drivers/net/ice/base/ice_flex_type.h
index 1dd57baccd..169476369b 100644
--- a/drivers/net/ice/base/ice_flex_type.h
+++ b/drivers/net/ice/base/ice_flex_type.h
@@ -786,4 +786,30 @@ enum ice_prof_type {
ICE_PROF_TUN_ALL = 0xE,
ICE_PROF_ALL = 0xFF,
};
+
+/* Number of bits/bytes contained in meta init entry. Note, this should be a
+ * multiple of 32 bits.
+ */
+#define ICE_META_INIT_BITS 192
+#define ICE_META_INIT_DW_CNT (ICE_META_INIT_BITS / (sizeof(__le32) * \
+ BITS_PER_BYTE))
+
+/* The meta init Flag field starts at this bit */
+#define ICE_META_FLAGS_ST 123
+
+/* The entry and bit to check for Double VLAN Mode (DVM) support */
+#define ICE_META_VLAN_MODE_ENTRY 0
+#define ICE_META_FLAG_VLAN_MODE 60
+#define ICE_META_VLAN_MODE_BIT (ICE_META_FLAGS_ST + \
+ ICE_META_FLAG_VLAN_MODE)
+
+struct ice_meta_init_entry {
+ __le32 bm[ICE_META_INIT_DW_CNT];
+};
+
+struct ice_meta_init_section {
+ __le16 count;
+ __le16 offset;
+ struct ice_meta_init_entry entry[1];
+};
#endif /* _ICE_FLEX_TYPE_H_ */
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 603de74e25..c4e7a40295 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -5,6 +5,81 @@
#include "ice_vlan_mode.h"
#include "ice_common.h"
+/**
+ * ice_pkg_get_supported_vlan_mode - chk if DDP supports Double VLAN mode (DVM)
+ * @hw: pointer to the HW struct
+ * @dvm: output variable to determine if DDP supports DVM(true) or SVM(false)
+ */
+static enum ice_status
+ice_pkg_get_supported_vlan_mode(struct ice_hw *hw, bool *dvm)
+{
+ u16 meta_init_size = sizeof(struct ice_meta_init_section);
+ struct ice_meta_init_section *sect;
+ struct ice_buf_build *bld;
+ enum ice_status status;
+
+ /* if anything fails, we assume there is no DVM support */
+ *dvm = false;
+
+ bld = ice_pkg_buf_alloc_single_section(hw,
+ ICE_SID_RXPARSER_METADATA_INIT,
+ meta_init_size, (void **)§);
+ if (!bld)
+ return ICE_ERR_NO_MEMORY;
+
+ /* only need to read a single section */
+ sect->count = CPU_TO_LE16(1);
+ sect->offset = CPU_TO_LE16(ICE_META_VLAN_MODE_ENTRY);
+
+ status = ice_aq_upload_section(hw,
+ (struct ice_buf_hdr *)ice_pkg_buf(bld),
+ ICE_PKG_BUF_SIZE, NULL);
+ if (!status) {
+ ice_declare_bitmap(entry, ICE_META_INIT_BITS);
+ u32 arr[ICE_META_INIT_DW_CNT];
+ u16 i;
+
+ /* convert to host bitmap format */
+ for (i = 0; i < ICE_META_INIT_DW_CNT; i++)
+ arr[i] = LE32_TO_CPU(sect->entry[0].bm[i]);
+
+ ice_bitmap_from_array32(entry, arr, (u16)ICE_META_INIT_BITS);
+
+ /* check if DVM is supported */
+ *dvm = ice_is_bit_set(entry, ICE_META_VLAN_MODE_BIT);
+ }
+
+ ice_pkg_buf_free(hw, bld);
+
+ return status;
+}
+
+/**
+ * ice_is_dvm_supported - check if double VLAN mode is supported based on DDP
+ * @hw: pointer to the hardware structure
+ *
+ * Returns true if DVM is supported and false if only SVM is supported. This
+ * function should only be called while the global config lock is held and after
+ * the package has been successfully downloaded.
+ */
+static bool ice_is_dvm_supported(struct ice_hw *hw)
+{
+ enum ice_status status;
+ bool pkg_supports_dvm;
+
+ status = ice_pkg_get_supported_vlan_mode(hw, &pkg_supports_dvm);
+ if (status) {
+ ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, err %d\n",
+ status);
+ return false;
+ }
+
+ if (!pkg_supports_dvm)
+ return false;
+
+ return true;
+}
+
/**
* ice_set_svm - set single VLAN mode
* @hw: pointer to the HW structure
@@ -34,6 +109,9 @@ enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
{
enum ice_status status = ICE_ERR_NOT_IMPL;
+ if (!ice_is_dvm_supported(hw))
+ return ICE_SUCCESS;
+
if (hw->vlan_mode_ops.set_dvm)
status = hw->vlan_mode_ops.set_dvm(hw);
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 06/18] net/ice/base: support configuring device in double VLAN mode
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (4 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 05/18] net/ice/base: support checking double VLAN mode Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 07/18] net/ice/base: do not set VLAN mode in DCF mode Haiyue Wang
` (12 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 14e7a4b37b4f2f765b4da08019ffc9098d99a076 ]
In order to support configuring the device in Double VLAN Mode (DVM),
the DDP and FW have to support DVM. If both support DVM, the PF
that downloads the package needs to update the default recipes and set
the VLAN mode. This is done in ice_set_dvm().
In order to support updating the default recipes in DVM add support
for updating an existing switch recipe's lkup_idx and mask.
This is done by first calling the get recipe AQ (0x0292) with the
desired recipe ID. Then, if that is successful update one of the lookup
indices (lkup_idx) and its associated mask if the mask is valid
otherwise the already existing mask will be used.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 36 ++++
drivers/net/ice/base/ice_common.c | 2 -
drivers/net/ice/base/ice_flex_pipe.c | 9 +-
drivers/net/ice/base/ice_switch.c | 58 ++++++
drivers/net/ice/base/ice_switch.h | 12 ++
drivers/net/ice/base/ice_type.h | 2 +-
drivers/net/ice/base/ice_vlan_mode.c | 284 ++++++++++++++++++++++++--
drivers/net/ice/base/ice_vlan_mode.h | 24 +--
8 files changed, 381 insertions(+), 46 deletions(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index c0617093d4..1bd4f2fc8d 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -358,6 +358,40 @@ struct ice_aqc_get_allocd_res_desc {
__le32 addr_low;
};
+/* Request buffer for Set VLAN Mode AQ command (indirect 0x020C) */
+struct ice_aqc_set_vlan_mode {
+ u8 reserved;
+ u8 l2tag_prio_tagging;
+#define ICE_AQ_VLAN_PRIO_TAG_S 0
+#define ICE_AQ_VLAN_PRIO_TAG_M (0x7 << ICE_AQ_VLAN_PRIO_TAG_S)
+#define ICE_AQ_VLAN_PRIO_TAG_NOT_SUPPORTED 0x0
+#define ICE_AQ_VLAN_PRIO_TAG_STAG 0x1
+#define ICE_AQ_VLAN_PRIO_TAG_OUTER_CTAG 0x2
+#define ICE_AQ_VLAN_PRIO_TAG_OUTER_VLAN 0x3
+#define ICE_AQ_VLAN_PRIO_TAG_INNER_CTAG 0x4
+#define ICE_AQ_VLAN_PRIO_TAG_MAX 0x4
+#define ICE_AQ_VLAN_PRIO_TAG_ERROR 0x7
+ u8 l2tag_reserved[64];
+ u8 rdma_packet;
+#define ICE_AQ_VLAN_RDMA_TAG_S 0
+#define ICE_AQ_VLAN_RDMA_TAG_M (0x3F << ICE_AQ_VLAN_RDMA_TAG_S)
+#define ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING 0x10
+#define ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING 0x1A
+ u8 rdma_reserved[2];
+ u8 mng_vlan_prot_id;
+#define ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER 0x10
+#define ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER 0x11
+ u8 prot_id_reserved[30];
+};
+
+/* Response buffer for Get VLAN Mode AQ command (indirect 0x020D) */
+struct ice_aqc_get_vlan_mode {
+ u8 vlan_mode;
+#define ICE_AQ_VLAN_MODE_DVM_ENA BIT(0)
+ u8 l2tag_prio_tagging;
+ u8 reserved[98];
+};
+
/* Add VSI (indirect 0x0210)
* Update VSI (indirect 0x0211)
* Get VSI (indirect 0x0212)
@@ -2905,6 +2939,8 @@ enum ice_adminq_opc {
ice_aqc_opc_alloc_res = 0x0208,
ice_aqc_opc_free_res = 0x0209,
ice_aqc_opc_get_allocd_res_desc = 0x020A,
+ ice_aqc_opc_set_vlan_mode_parameters = 0x020C,
+ ice_aqc_opc_get_vlan_mode_parameters = 0x020D,
/* VSI commands */
ice_aqc_opc_add_vsi = 0x0210,
diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c
index b5f1d8cce5..0f120ec6e0 100644
--- a/drivers/net/ice/base/ice_common.c
+++ b/drivers/net/ice/base/ice_common.c
@@ -831,8 +831,6 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
goto err_unroll_fltr_mgmt_struct;
ice_init_lock(&hw->tnl_lock);
- ice_init_vlan_mode_ops(hw);
-
return ICE_SUCCESS;
err_unroll_fltr_mgmt_struct:
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index e511b50a00..cced7b6352 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1073,6 +1073,7 @@ static enum ice_status
ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
{
struct ice_buf_table *ice_buf_tbl;
+ enum ice_status status;
ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
ice_debug(hw, ICE_DBG_PKG, "Segment format version: %d.%d.%d.%d\n",
@@ -1090,8 +1091,12 @@ ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
ice_debug(hw, ICE_DBG_PKG, "Seg buf count: %d\n",
LE32_TO_CPU(ice_buf_tbl->buf_count));
- return ice_dwnld_cfg_bufs(hw, ice_buf_tbl->buf_array,
- LE32_TO_CPU(ice_buf_tbl->buf_count));
+ status = ice_dwnld_cfg_bufs(hw, ice_buf_tbl->buf_array,
+ LE32_TO_CPU(ice_buf_tbl->buf_count));
+
+ ice_cache_vlan_mode(hw);
+
+ return status;
}
/**
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 8d455f5995..df8319a7e7 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -2768,6 +2768,64 @@ ice_aq_get_recipe(struct ice_hw *hw,
return status;
}
+/**
+ * ice_update_recipe_lkup_idx - update a default recipe based on the lkup_idx
+ * @hw: pointer to the HW struct
+ * @params: parameters used to update the default recipe
+ *
+ * This function only supports updating default recipes and it only supports
+ * updating a single recipe based on the lkup_idx at a time.
+ *
+ * This is done as a read-modify-write operation. First, get the current recipe
+ * contents based on the recipe's ID. Then modify the field vector index and
+ * mask if it's valid at the lkup_idx. Finally, use the add recipe AQ to update
+ * the pre-existing recipe with the modifications.
+ */
+enum ice_status
+ice_update_recipe_lkup_idx(struct ice_hw *hw,
+ struct ice_update_recipe_lkup_idx_params *params)
+{
+ struct ice_aqc_recipe_data_elem *rcp_list;
+ u16 num_recps = ICE_MAX_NUM_RECIPES;
+ enum ice_status status;
+
+ rcp_list = (struct ice_aqc_recipe_data_elem *)ice_malloc(hw, num_recps * sizeof(*rcp_list));
+ if (!rcp_list)
+ return ICE_ERR_NO_MEMORY;
+
+ /* read current recipe list from firmware */
+ rcp_list->recipe_indx = params->rid;
+ status = ice_aq_get_recipe(hw, rcp_list, &num_recps, params->rid, NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_SW, "Failed to get recipe %d, status %d\n",
+ params->rid, status);
+ goto error_out;
+ }
+
+ /* only modify existing recipe's lkup_idx and mask if valid, while
+ * leaving all other fields the same, then update the recipe firmware
+ */
+ rcp_list->content.lkup_indx[params->lkup_idx] = params->fv_idx;
+ if (params->mask_valid)
+ rcp_list->content.mask[params->lkup_idx] =
+ CPU_TO_LE16(params->mask);
+
+ if (params->ignore_valid)
+ rcp_list->content.lkup_indx[params->lkup_idx] |=
+ ICE_AQ_RECIPE_LKUP_IGNORE;
+
+ status = ice_aq_add_recipe(hw, &rcp_list[0], 1, NULL);
+ if (status)
+ ice_debug(hw, ICE_DBG_SW, "Failed to update recipe %d lkup_idx %d fv_idx %d mask %d mask_valid %s, status %d\n",
+ params->rid, params->lkup_idx, params->fv_idx,
+ params->mask, params->mask_valid ? "true" : "false",
+ status);
+
+error_out:
+ ice_free(hw, rcp_list);
+ return status;
+}
+
/**
* ice_aq_map_recipe_to_profile - Map recipe to packet profile
* @hw: pointer to the HW struct
diff --git a/drivers/net/ice/base/ice_switch.h b/drivers/net/ice/base/ice_switch.h
index 392eb369c7..78e6be35a9 100644
--- a/drivers/net/ice/base/ice_switch.h
+++ b/drivers/net/ice/base/ice_switch.h
@@ -202,6 +202,15 @@ struct ice_fltr_info {
u8 lan_en; /* Indicate if packet can be forwarded to the uplink */
};
+struct ice_update_recipe_lkup_idx_params {
+ u16 rid;
+ u16 fv_idx;
+ bool ignore_valid;
+ u16 mask;
+ bool mask_valid;
+ u8 lkup_idx;
+};
+
struct ice_adv_lkup_elem {
enum ice_protocol_type type;
union ice_prot_hdr h_u; /* Header values */
@@ -524,4 +533,7 @@ ice_replay_vsi_all_fltr(struct ice_hw *hw, struct ice_port_info *pi,
void ice_rm_sw_replay_rule_info(struct ice_hw *hw, struct ice_switch_info *sw);
void ice_rm_all_sw_replay_rule_info(struct ice_hw *hw);
bool ice_is_prof_rule(enum ice_sw_tunnel_type type);
+enum ice_status
+ice_update_recipe_lkup_idx(struct ice_hw *hw,
+ struct ice_update_recipe_lkup_idx_params *params);
#endif /* _ICE_SWITCH_H_ */
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index 996b58b743..a4a4427693 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -986,7 +986,7 @@ struct ice_hw {
ice_declare_bitmap(fdir_perfect_fltr, ICE_FLTR_PTYPE_MAX);
struct ice_lock rss_locks; /* protect RSS configuration */
struct LIST_HEAD_TYPE rss_list_head;
- struct ice_vlan_mode_ops vlan_mode_ops;
+ u8 dvm_ena;
};
/* Statistics collected by each port, VSI, VEB, and S-channel */
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index c4e7a40295..c86e803c52 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -55,21 +55,100 @@ ice_pkg_get_supported_vlan_mode(struct ice_hw *hw, bool *dvm)
}
/**
- * ice_is_dvm_supported - check if double VLAN mode is supported based on DDP
+ * ice_aq_get_vlan_mode - get the VLAN mode of the device
+ * @hw: pointer to the HW structure
+ * @get_params: structure FW fills in based on the current VLAN mode config
+ *
+ * Get VLAN Mode Parameters (0x020D)
+ */
+static enum ice_status
+ice_aq_get_vlan_mode(struct ice_hw *hw,
+ struct ice_aqc_get_vlan_mode *get_params)
+{
+ struct ice_aq_desc desc;
+
+ if (!get_params)
+ return ICE_ERR_PARAM;
+
+ ice_fill_dflt_direct_cmd_desc(&desc,
+ ice_aqc_opc_get_vlan_mode_parameters);
+
+ return ice_aq_send_cmd(hw, &desc, get_params, sizeof(*get_params),
+ NULL);
+}
+
+/**
+ * ice_aq_is_dvm_ena - query FW to check if double VLAN mode is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Returns true if the hardware/firmware is configured in double VLAN mode,
+ * else return false signaling that the hardware/firmware is configured in
+ * single VLAN mode.
+ *
+ * Also, return false if this call fails for any reason (i.e. firmware doesn't
+ * support this AQ call).
+ */
+static bool ice_aq_is_dvm_ena(struct ice_hw *hw)
+{
+ struct ice_aqc_get_vlan_mode get_params = { 0 };
+ enum ice_status status;
+
+ status = ice_aq_get_vlan_mode(hw, &get_params);
+ if (status) {
+ ice_debug(hw, ICE_DBG_AQ, "Failed to get VLAN mode, status %d\n",
+ status);
+ return false;
+ }
+
+ return (get_params.vlan_mode & ICE_AQ_VLAN_MODE_DVM_ENA);
+}
+
+/**
+ * ice_is_dvm_ena - check if double VLAN mode is enabled
+ * @hw: pointer to the HW structure
+ *
+ * The device is configured in single or double VLAN mode on initialization and
+ * this cannot be dynamically changed during runtime. Based on this there is no
+ * need to make an AQ call every time the driver needs to know the VLAN mode.
+ * Instead, use the cached VLAN mode.
+ */
+bool ice_is_dvm_ena(struct ice_hw *hw)
+{
+ return hw->dvm_ena;
+}
+
+/**
+ * ice_cache_vlan_mode - cache VLAN mode after DDP is downloaded
+ * @hw: pointer to the HW structure
+ *
+ * This is only called after downloading the DDP and after the global
+ * configuration lock has been released because all ports on a device need to
+ * cache the VLAN mode.
+ */
+void ice_cache_vlan_mode(struct ice_hw *hw)
+{
+ hw->dvm_ena = ice_aq_is_dvm_ena(hw) ? true : false;
+}
+
+/**
+ * ice_is_dvm_supported - check if Double VLAN Mode is supported
* @hw: pointer to the hardware structure
*
- * Returns true if DVM is supported and false if only SVM is supported. This
- * function should only be called while the global config lock is held and after
- * the package has been successfully downloaded.
+ * Returns true if Double VLAN Mode (DVM) is supported and false if only Single
+ * VLAN Mode (SVM) is supported. In order for DVM to be supported the DDP and
+ * firmware must support it, otherwise only SVM is supported. This function
+ * should only be called while the global config lock is held and after the
+ * package has been successfully downloaded.
*/
static bool ice_is_dvm_supported(struct ice_hw *hw)
{
+ struct ice_aqc_get_vlan_mode get_vlan_mode = { 0 };
enum ice_status status;
bool pkg_supports_dvm;
status = ice_pkg_get_supported_vlan_mode(hw, &pkg_supports_dvm);
if (status) {
- ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, err %d\n",
+ ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, status %d\n",
status);
return false;
}
@@ -77,28 +156,196 @@ static bool ice_is_dvm_supported(struct ice_hw *hw)
if (!pkg_supports_dvm)
return false;
+ /* If firmware returns success, then it supports DVM, else it only
+ * supports SVM
+ */
+ status = ice_aq_get_vlan_mode(hw, &get_vlan_mode);
+ if (status) {
+ ice_debug(hw, ICE_DBG_NVM, "Failed to get VLAN mode, status %d\n",
+ status);
+ return false;
+ }
+
return true;
}
+#define ICE_EXTERNAL_VLAN_ID_FV_IDX 11
+#define ICE_SW_LKUP_VLAN_LOC_LKUP_IDX 1
+#define ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX 2
+#define ICE_SW_LKUP_PROMISC_VLAN_LOC_LKUP_IDX 2
+#define ICE_PKT_FLAGS_0_TO_15_FV_IDX 1
+#define ICE_PKT_FLAGS_0_TO_15_VLAN_FLAGS_MASK 0xD000
+static struct ice_update_recipe_lkup_idx_params ice_dvm_dflt_recipes[] = {
+ {
+ /* Update recipe ICE_SW_LKUP_VLAN to filter based on the
+ * outer/single VLAN in DVM
+ */
+ .rid = ICE_SW_LKUP_VLAN,
+ .fv_idx = ICE_EXTERNAL_VLAN_ID_FV_IDX,
+ .ignore_valid = true,
+ .mask = 0,
+ .mask_valid = false, /* use pre-existing mask */
+ .lkup_idx = ICE_SW_LKUP_VLAN_LOC_LKUP_IDX,
+ },
+ {
+ /* Update recipe ICE_SW_LKUP_VLAN to filter based on the VLAN
+ * packet flags to support VLAN filtering on multiple VLAN
+ * ethertypes (i.e. 0x8100 and 0x88a8) in DVM
+ */
+ .rid = ICE_SW_LKUP_VLAN,
+ .fv_idx = ICE_PKT_FLAGS_0_TO_15_FV_IDX,
+ .ignore_valid = false,
+ .mask = ICE_PKT_FLAGS_0_TO_15_VLAN_FLAGS_MASK,
+ .mask_valid = true,
+ .lkup_idx = ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX,
+ },
+ {
+ /* Update recipe ICE_SW_LKUP_PROMISC_VLAN to filter based on the
+ * outer/single VLAN in DVM
+ */
+ .rid = ICE_SW_LKUP_PROMISC_VLAN,
+ .fv_idx = ICE_EXTERNAL_VLAN_ID_FV_IDX,
+ .ignore_valid = true,
+ .mask = 0,
+ .mask_valid = false, /* use pre-existing mask */
+ .lkup_idx = ICE_SW_LKUP_PROMISC_VLAN_LOC_LKUP_IDX,
+ },
+};
+
/**
- * ice_set_svm - set single VLAN mode
+ * ice_dvm_update_dflt_recipes - update default switch recipes in DVM
+ * @hw: hardware structure used to update the recipes
+ */
+static enum ice_status ice_dvm_update_dflt_recipes(struct ice_hw *hw)
+{
+ unsigned long i;
+
+ for (i = 0; i < ARRAY_SIZE(ice_dvm_dflt_recipes); i++) {
+ struct ice_update_recipe_lkup_idx_params *params;
+ enum ice_status status;
+
+ params = &ice_dvm_dflt_recipes[i];
+
+ status = ice_update_recipe_lkup_idx(hw, params);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to update RID %d lkup_idx %d fv_idx %d mask_valid %s mask 0x%04x\n",
+ params->rid, params->lkup_idx, params->fv_idx,
+ params->mask_valid ? "true" : "false",
+ params->mask);
+ return status;
+ }
+ }
+
+ return ICE_SUCCESS;
+}
+
+/**
+ * ice_aq_set_vlan_mode - set the VLAN mode of the device
* @hw: pointer to the HW structure
+ * @set_params: requested VLAN mode configuration
+ *
+ * Set VLAN Mode Parameters (0x020C)
+ */
+static enum ice_status
+ice_aq_set_vlan_mode(struct ice_hw *hw,
+ struct ice_aqc_set_vlan_mode *set_params)
+{
+ u8 rdma_packet, mng_vlan_prot_id;
+ struct ice_aq_desc desc;
+
+ if (!set_params)
+ return ICE_ERR_PARAM;
+
+ if (set_params->l2tag_prio_tagging > ICE_AQ_VLAN_PRIO_TAG_MAX)
+ return ICE_ERR_PARAM;
+
+ rdma_packet = set_params->rdma_packet;
+ if (rdma_packet != ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING &&
+ rdma_packet != ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING)
+ return ICE_ERR_PARAM;
+
+ mng_vlan_prot_id = set_params->mng_vlan_prot_id;
+ if (mng_vlan_prot_id != ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER &&
+ mng_vlan_prot_id != ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER)
+ return ICE_ERR_PARAM;
+
+ ice_fill_dflt_direct_cmd_desc(&desc,
+ ice_aqc_opc_set_vlan_mode_parameters);
+ desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD);
+
+ return ice_aq_send_cmd(hw, &desc, set_params, sizeof(*set_params),
+ NULL);
+}
+
+/**
+ * ice_set_dvm - sets up software and hardware for double VLAN mode
+ * @hw: pointer to the hardware structure
*/
-static enum ice_status ice_set_svm_dflt(struct ice_hw *hw)
+static enum ice_status ice_set_dvm(struct ice_hw *hw)
{
- ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
+ struct ice_aqc_set_vlan_mode params = { 0 };
+ enum ice_status status;
+
+ params.l2tag_prio_tagging = ICE_AQ_VLAN_PRIO_TAG_OUTER_CTAG;
+ params.rdma_packet = ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING;
+ params.mng_vlan_prot_id = ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER;
+
+ status = ice_aq_set_vlan_mode(hw, ¶ms);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set double VLAN mode parameters, status %d\n",
+ status);
+ return status;
+ }
- return ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+ status = ice_dvm_update_dflt_recipes(hw);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to update default recipes for double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
+ status = ice_aq_set_port_params(hw->port_info, 0, false, false, true,
+ NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set port in double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
+ return ICE_SUCCESS;
}
/**
- * ice_init_vlan_mode_ops - initialize VLAN mode configuration ops
+ * ice_set_svm - set single VLAN mode
* @hw: pointer to the HW structure
*/
-void ice_init_vlan_mode_ops(struct ice_hw *hw)
+static enum ice_status ice_set_svm(struct ice_hw *hw)
{
- hw->vlan_mode_ops.set_dvm = NULL;
- hw->vlan_mode_ops.set_svm = ice_set_svm_dflt;
+ struct ice_aqc_set_vlan_mode *set_params;
+ enum ice_status status;
+
+ status = ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set port parameters for single VLAN mode\n");
+ return status;
+ }
+
+ set_params = (struct ice_aqc_set_vlan_mode *)
+ ice_malloc(hw, sizeof(*set_params));
+ if (!set_params)
+ return ICE_ERR_NO_MEMORY;
+
+ /* default configuration for SVM configurations */
+ set_params->l2tag_prio_tagging = ICE_AQ_VLAN_PRIO_TAG_INNER_CTAG;
+ set_params->rdma_packet = ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING;
+ set_params->mng_vlan_prot_id = ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER;
+
+ status = ice_aq_set_vlan_mode(hw, set_params);
+ if (status)
+ ice_debug(hw, ICE_DBG_INIT, "Failed to configure port in single VLAN mode\n");
+
+ ice_free(hw, set_params);
+ return status;
}
/**
@@ -107,16 +354,11 @@ void ice_init_vlan_mode_ops(struct ice_hw *hw)
*/
enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
{
- enum ice_status status = ICE_ERR_NOT_IMPL;
-
if (!ice_is_dvm_supported(hw))
return ICE_SUCCESS;
- if (hw->vlan_mode_ops.set_dvm)
- status = hw->vlan_mode_ops.set_dvm(hw);
-
- if (status)
- return hw->vlan_mode_ops.set_svm(hw);
+ if (!ice_set_dvm(hw))
+ return ICE_SUCCESS;
- return ICE_SUCCESS;
+ return ice_set_svm(hw);
}
diff --git a/drivers/net/ice/base/ice_vlan_mode.h b/drivers/net/ice/base/ice_vlan_mode.h
index 1b9db4d36f..134bd41635 100644
--- a/drivers/net/ice/base/ice_vlan_mode.h
+++ b/drivers/net/ice/base/ice_vlan_mode.h
@@ -5,28 +5,12 @@
#ifndef _ICE_VLAN_MODE_H_
#define _ICE_VLAN_MODE_H_
+#include "ice_osdep.h"
+
struct ice_hw;
+bool ice_is_dvm_ena(struct ice_hw *hw);
+void ice_cache_vlan_mode(struct ice_hw *hw);
enum ice_status ice_set_vlan_mode(struct ice_hw *hw);
-void ice_init_vlan_mode_ops(struct ice_hw *hw);
-
-/* This structure defines the VLAN mode configuration interface. It is used to set the VLAN mode.
- *
- * Note: These operations will be called while the global configuration lock is held.
- *
- * enum ice_status (*set_svm)(struct ice_hw *hw);
- * This function is called when the DDP and/or Firmware don't support double VLAN mode (DVM) or
- * if the set_dvm op is not implemented and/or returns failure. It will set the device in
- * single VLAN mode (SVM).
- *
- * enum ice_status (*set_dvm)(struct ice_hw *hw);
- * This function is called when the DDP and Firmware support double VLAN mode (DVM). It should
- * be implemented to set double VLAN mode. If it fails or remains unimplemented, set_svm will
- * be called as a fallback plan.
- */
-struct ice_vlan_mode_ops {
- enum ice_status (*set_svm)(struct ice_hw *hw);
- enum ice_status (*set_dvm)(struct ice_hw *hw);
-};
#endif /* _ICE_VLAN_MODE_H */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 07/18] net/ice/base: do not set VLAN mode in DCF mode
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (5 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 06/18] net/ice/base: support configuring device in " Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 08/18] net/ice/base: update boost TCAM for DVM Haiyue Wang
` (11 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Haiyue Wang, Qiming Yang
[ upstream commit 70f4e156ea52e3d8278acff30d06447eab623a15 ]
The PF will set the VLAN mode globally, DCF just needs to get the VLAN
mode.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_vlan_mode.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index c86e803c52..42bb108928 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -354,6 +354,12 @@ static enum ice_status ice_set_svm(struct ice_hw *hw)
*/
enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
{
+ /* DCF only has the ability to query the VLAN mode. Setting the VLAN
+ * mode is done by the PF.
+ */
+ if (hw->dcf_enabled)
+ return ICE_SUCCESS;
+
if (!ice_is_dvm_supported(hw))
return ICE_SUCCESS;
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 08/18] net/ice/base: update boost TCAM for DVM
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (6 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 07/18] net/ice/base: do not set VLAN mode in DCF mode Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 09/18] net/ice/base: change protocol ID for VLAN in DVM Haiyue Wang
` (10 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Dan Nowlin, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit f977165db0ba8435269a5e19e0e9239a4b22d140 ]
Add code to update boost TCAM entries to enable DVM. This requires
enabled DVM entries, and disabling SVM entries.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_flex_pipe.c | 223 +++++++++++++++++++++++----
drivers/net/ice/base/ice_flex_pipe.h | 1 +
drivers/net/ice/base/ice_flex_type.h | 13 ++
drivers/net/ice/base/ice_type.h | 2 +
drivers/net/ice/base/ice_vlan_mode.c | 7 +
5 files changed, 213 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index cced7b6352..058694653a 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -7,9 +7,17 @@
#include "ice_protocol_type.h"
#include "ice_flow.h"
+/* For supporting double VLAN mode, it is necessary to enable or disable certain
+ * boost tcam entries. The metadata labels names that match the following
+ * prefixes will be saved to allow enabling double VLAN mode.
+ */
+#define ICE_DVM_PRE "BOOST_MAC_VLAN_DVM" /* enable these entries */
+#define ICE_SVM_PRE "BOOST_MAC_VLAN_SVM" /* disable these entries */
+
/* To support tunneling entries by PF, the package will append the PF number to
* the label; for example TNL_VXLAN_PF0, TNL_VXLAN_PF1, TNL_VXLAN_PF2, etc.
*/
+#define ICE_TNL_PRE "TNL_"
static const struct ice_tunnel_type_scan tnls[] = {
{ TNL_VXLAN, "TNL_VXLAN_PF" },
{ TNL_GENEVE, "TNL_GENEVE_PF" },
@@ -452,6 +460,57 @@ ice_enum_labels(struct ice_seg *ice_seg, u32 type, struct ice_pkg_enum *state,
return label->name;
}
+/**
+ * ice_add_tunnel_hint
+ * @hw: pointer to the HW structure
+ * @label_name: label text
+ * @val: value of the tunnel port boost entry
+ */
+static void ice_add_tunnel_hint(struct ice_hw *hw, char *label_name, u16 val)
+{
+ if (hw->tnl.count < ICE_TUNNEL_MAX_ENTRIES) {
+ u16 i;
+
+ for (i = 0; tnls[i].type != TNL_LAST; i++) {
+ size_t len = strlen(tnls[i].label_prefix);
+
+ /* Look for matching label start, before continuing */
+ if (strncmp(label_name, tnls[i].label_prefix, len))
+ continue;
+
+ /* Make sure this label matches our PF. Note that the PF
+ * character ('0' - '7') will be located where our
+ * prefix string's null terminator is located.
+ */
+ if ((label_name[len] - '0') == hw->pf_id) {
+ hw->tnl.tbl[hw->tnl.count].type = tnls[i].type;
+ hw->tnl.tbl[hw->tnl.count].valid = false;
+ hw->tnl.tbl[hw->tnl.count].in_use = false;
+ hw->tnl.tbl[hw->tnl.count].marked = false;
+ hw->tnl.tbl[hw->tnl.count].boost_addr = val;
+ hw->tnl.tbl[hw->tnl.count].port = 0;
+ hw->tnl.count++;
+ break;
+ }
+ }
+ }
+}
+
+/**
+ * ice_add_dvm_hint
+ * @hw: pointer to the HW structure
+ * @val: value of the boost entry
+ * @enable: true if entry needs to be enabled, or false if needs to be disabled
+ */
+static void ice_add_dvm_hint(struct ice_hw *hw, u16 val, bool enable)
+{
+ if (hw->dvm_upd.count < ICE_DVM_MAX_ENTRIES) {
+ hw->dvm_upd.tbl[hw->dvm_upd.count].boost_addr = val;
+ hw->dvm_upd.tbl[hw->dvm_upd.count].enable = enable;
+ hw->dvm_upd.count++;
+ }
+}
+
/**
* ice_init_pkg_hints
* @hw: pointer to the HW structure
@@ -478,40 +537,34 @@ static void ice_init_pkg_hints(struct ice_hw *hw, struct ice_seg *ice_seg)
label_name = ice_enum_labels(ice_seg, ICE_SID_LBL_RXPARSER_TMEM, &state,
&val);
- while (label_name && hw->tnl.count < ICE_TUNNEL_MAX_ENTRIES) {
- for (i = 0; tnls[i].type != TNL_LAST; i++) {
- size_t len = strlen(tnls[i].label_prefix);
+ while (label_name) {
+ if (!strncmp(label_name, ICE_TNL_PRE, strlen(ICE_TNL_PRE)))
+ /* check for a tunnel entry */
+ ice_add_tunnel_hint(hw, label_name, val);
- /* Look for matching label start, before continuing */
- if (strncmp(label_name, tnls[i].label_prefix, len))
- continue;
+ /* check for a dvm mode entry */
+ else if (!strncmp(label_name, ICE_DVM_PRE, strlen(ICE_DVM_PRE)))
+ ice_add_dvm_hint(hw, val, true);
- /* Make sure this label matches our PF. Note that the PF
- * character ('0' - '7') will be located where our
- * prefix string's null terminator is located.
- */
- if ((label_name[len] - '0') == hw->pf_id) {
- hw->tnl.tbl[hw->tnl.count].type = tnls[i].type;
- hw->tnl.tbl[hw->tnl.count].valid = false;
- hw->tnl.tbl[hw->tnl.count].in_use = false;
- hw->tnl.tbl[hw->tnl.count].marked = false;
- hw->tnl.tbl[hw->tnl.count].boost_addr = val;
- hw->tnl.tbl[hw->tnl.count].port = 0;
- hw->tnl.count++;
- break;
- }
- }
+ /* check for a svm mode entry */
+ else if (!strncmp(label_name, ICE_SVM_PRE, strlen(ICE_SVM_PRE)))
+ ice_add_dvm_hint(hw, val, false);
label_name = ice_enum_labels(NULL, 0, &state, &val);
}
- /* Cache the appropriate boost TCAM entry pointers */
+ /* Cache the appropriate boost TCAM entry pointers for tunnels */
for (i = 0; i < hw->tnl.count; i++) {
ice_find_boost_entry(ice_seg, hw->tnl.tbl[i].boost_addr,
&hw->tnl.tbl[i].boost_entry);
if (hw->tnl.tbl[i].boost_entry)
hw->tnl.tbl[i].valid = true;
}
+
+ /* Cache the appropriate boost TCAM entry pointers for DVM and SVM */
+ for (i = 0; i < hw->dvm_upd.count; i++)
+ ice_find_boost_entry(ice_seg, hw->dvm_upd.tbl[i].boost_addr,
+ &hw->dvm_upd.tbl[i].boost_entry);
}
/* Key creation */
@@ -916,26 +969,21 @@ ice_find_seg_in_pkg(struct ice_hw *hw, u32 seg_type,
}
/**
- * ice_update_pkg
+ * ice_update_pkg_no_lock
* @hw: pointer to the hardware structure
* @bufs: pointer to an array of buffers
* @count: the number of buffers in the array
- *
- * Obtains change lock and updates package.
*/
-enum ice_status
-ice_update_pkg(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
+static enum ice_status
+ice_update_pkg_no_lock(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
{
- enum ice_status status;
- u32 offset, info, i;
-
- status = ice_acquire_change_lock(hw, ICE_RES_WRITE);
- if (status)
- return status;
+ enum ice_status status = ICE_SUCCESS;
+ u32 i;
for (i = 0; i < count; i++) {
struct ice_buf_hdr *bh = (struct ice_buf_hdr *)(bufs + i);
bool last = ((i + 1) == count);
+ u32 offset, info;
status = ice_aq_update_pkg(hw, bh, LE16_TO_CPU(bh->data_end),
last, &offset, &info, NULL);
@@ -947,6 +995,28 @@ ice_update_pkg(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
}
}
+ return status;
+}
+
+/**
+ * ice_update_pkg
+ * @hw: pointer to the hardware structure
+ * @bufs: pointer to an array of buffers
+ * @count: the number of buffers in the array
+ *
+ * Obtains change lock and updates package.
+ */
+enum ice_status
+ice_update_pkg(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
+{
+ enum ice_status status;
+
+ status = ice_acquire_change_lock(hw, ICE_RES_WRITE);
+ if (status)
+ return status;
+
+ status = ice_update_pkg_no_lock(hw, bufs, count);
+
ice_release_change_lock(hw);
return status;
@@ -2122,6 +2192,93 @@ ice_get_open_tunnel_port(struct ice_hw *hw, enum ice_tunnel_type type,
return res;
}
+/**
+ * ice_upd_dvm_boost_entry
+ * @hw: pointer to the HW structure
+ * @entry: pointer to double vlan boost entry info
+ */
+static enum ice_status
+ice_upd_dvm_boost_entry(struct ice_hw *hw, struct ice_dvm_entry *entry)
+{
+ struct ice_boost_tcam_section *sect_rx, *sect_tx;
+ enum ice_status status = ICE_ERR_MAX_LIMIT;
+ struct ice_buf_build *bld;
+ u8 val, dc, nm;
+
+ bld = ice_pkg_buf_alloc(hw);
+ if (!bld)
+ return ICE_ERR_NO_MEMORY;
+
+ /* allocate 2 sections, one for Rx parser, one for Tx parser */
+ if (ice_pkg_buf_reserve_section(bld, 2))
+ goto ice_upd_dvm_boost_entry_err;
+
+ sect_rx = (struct ice_boost_tcam_section *)
+ ice_pkg_buf_alloc_section(bld, ICE_SID_RXPARSER_BOOST_TCAM,
+ ice_struct_size(sect_rx, tcam, 1));
+ if (!sect_rx)
+ goto ice_upd_dvm_boost_entry_err;
+ sect_rx->count = CPU_TO_LE16(1);
+
+ sect_tx = (struct ice_boost_tcam_section *)
+ ice_pkg_buf_alloc_section(bld, ICE_SID_TXPARSER_BOOST_TCAM,
+ ice_struct_size(sect_tx, tcam, 1));
+ if (!sect_tx)
+ goto ice_upd_dvm_boost_entry_err;
+ sect_tx->count = CPU_TO_LE16(1);
+
+ /* copy original boost entry to update package buffer */
+ ice_memcpy(sect_rx->tcam, entry->boost_entry, sizeof(*sect_rx->tcam),
+ ICE_NONDMA_TO_NONDMA);
+
+ /* re-write the don't care and never match bits accordingly */
+ if (entry->enable) {
+ /* all bits are don't care */
+ val = 0x00;
+ dc = 0xFF;
+ nm = 0x00;
+ } else {
+ /* disable, one never match bit, the rest are don't care */
+ val = 0x00;
+ dc = 0xF7;
+ nm = 0x08;
+ }
+
+ ice_set_key((u8 *)§_rx->tcam[0].key, sizeof(sect_rx->tcam[0].key),
+ &val, NULL, &dc, &nm, 0, sizeof(u8));
+
+ /* exact copy of entry to Tx section entry */
+ ice_memcpy(sect_tx->tcam, sect_rx->tcam, sizeof(*sect_tx->tcam),
+ ICE_NONDMA_TO_NONDMA);
+
+ status = ice_update_pkg_no_lock(hw, ice_pkg_buf(bld), 1);
+
+ice_upd_dvm_boost_entry_err:
+ ice_pkg_buf_free(hw, bld);
+
+ return status;
+}
+
+/**
+ * ice_set_dvm_boost_entries
+ * @hw: pointer to the HW structure
+ *
+ * Enable double vlan by updating the appropriate boost tcam entries.
+ */
+enum ice_status ice_set_dvm_boost_entries(struct ice_hw *hw)
+{
+ enum ice_status status;
+ u16 i;
+
+ for (i = 0; i < hw->dvm_upd.count; i++) {
+ status = ice_upd_dvm_boost_entry(hw, &hw->dvm_upd.tbl[i]);
+ if (status)
+ return status;
+ }
+
+ return ICE_SUCCESS;
+}
+
/**
* ice_create_tunnel
* @hw: pointer to the HW structure
diff --git a/drivers/net/ice/base/ice_flex_pipe.h b/drivers/net/ice/base/ice_flex_pipe.h
index d4679cc940..61ce092319 100644
--- a/drivers/net/ice/base/ice_flex_pipe.h
+++ b/drivers/net/ice/base/ice_flex_pipe.h
@@ -49,6 +49,7 @@ ice_get_open_tunnel_port(struct ice_hw *hw, enum ice_tunnel_type type,
u16 *port);
enum ice_status
ice_create_tunnel(struct ice_hw *hw, enum ice_tunnel_type type, u16 port);
+enum ice_status ice_set_dvm_boost_entries(struct ice_hw *hw);
enum ice_status ice_destroy_tunnel(struct ice_hw *hw, u16 port, bool all);
bool ice_tunnel_port_in_use(struct ice_hw *hw, u16 port, u16 *index);
bool
diff --git a/drivers/net/ice/base/ice_flex_type.h b/drivers/net/ice/base/ice_flex_type.h
index 169476369b..dfa3cf3020 100644
--- a/drivers/net/ice/base/ice_flex_type.h
+++ b/drivers/net/ice/base/ice_flex_type.h
@@ -543,6 +543,19 @@ struct ice_tunnel_table {
u16 count;
};
+struct ice_dvm_entry {
+ u16 boost_addr;
+ u16 enable;
+ struct ice_boost_tcam_entry *boost_entry;
+};
+
+#define ICE_DVM_MAX_ENTRIES 48
+
+struct ice_dvm_table {
+ struct ice_dvm_entry tbl[ICE_DVM_MAX_ENTRIES];
+ u16 count;
+};
+
struct ice_pkg_es {
__le16 count;
__le16 offset;
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index a4a4427693..104f5dc101 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -962,6 +962,8 @@ struct ice_hw {
/* tunneling info */
struct ice_lock tnl_lock;
struct ice_tunnel_table tnl;
+ /* dvm boost update information */
+ struct ice_dvm_table dvm_upd;
struct ice_acl_tbl *acl_tbl;
struct ice_fd_hw_prof **acl_prof;
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 42bb108928..4a749cb9f1 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -312,6 +312,13 @@ static enum ice_status ice_set_dvm(struct ice_hw *hw)
return status;
}
+ status = ice_set_dvm_boost_entries(hw);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set boost TCAM entries for double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
return ICE_SUCCESS;
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 09/18] net/ice/base: change protocol ID for VLAN in DVM
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (7 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 08/18] net/ice/base: update boost TCAM for DVM Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 10/18] net/ice/base: refactor post DDP download VLAN mode config Haiyue Wang
` (9 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Michal Swiatkowski, Haiyue Wang, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 8d7bb8d500b1ccdeb30668516064337faa20b364 ]
Protocol id for first vlan in Double VLAN Mode (DVM) should be
ICE_VLAN_OF_HW = 16, but for Single VLAN Mode (SVM) this should be
ICE_VLAN_OL_HW = 17.
Change protocol id in type to id translation array for outer vlan
to 17 when DVM is enabled, which means the driver, package,
and firmware support DVM.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_flex_pipe.c | 3 +++
drivers/net/ice/base/ice_switch.c | 19 ++++++++++++++++++-
drivers/net/ice/base/ice_switch.h | 1 +
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index 058694653a..a92c2b8494 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1166,6 +1166,9 @@ ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
ice_cache_vlan_mode(hw);
+ if (ice_is_dvm_ena(hw))
+ ice_change_proto_id_to_dvm();
+
return status;
}
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index df8319a7e7..55bfc3e6c5 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -6127,7 +6127,7 @@ static const struct ice_prot_ext_tbl_entry ice_prot_ext[ICE_PROTOCOL_LAST] = {
* following policy.
*/
-static const struct ice_protocol_entry ice_prot_id_tbl[ICE_PROTOCOL_LAST] = {
+static struct ice_protocol_entry ice_prot_id_tbl[ICE_PROTOCOL_LAST] = {
{ ICE_MAC_OFOS, ICE_MAC_OFOS_HW },
{ ICE_MAC_IL, ICE_MAC_IL_HW },
{ ICE_ETYPE_OL, ICE_ETYPE_OL_HW },
@@ -6232,6 +6232,23 @@ static u16 ice_find_recp(struct ice_hw *hw, struct ice_prot_lkup_ext *lkup_exts,
return ICE_MAX_NUM_RECIPES;
}
+/**
+ * ice_change_proto_id_to_dvm - change proto id in prot_id_tbl
+ *
+ * As protocol id for outer vlan is different in dvm and svm, if dvm is
+ * supported protocol array record for outer vlan has to be modified to
+ * reflect the value proper for DVM.
+ */
+void ice_change_proto_id_to_dvm(void)
+{
+ u8 i;
+
+ for (i = 0; i < ARRAY_SIZE(ice_prot_id_tbl); i++)
+ if (ice_prot_id_tbl[i].type == ICE_VLAN_OFOS &&
+ ice_prot_id_tbl[i].protocol_id != ICE_VLAN_OF_HW)
+ ice_prot_id_tbl[i].protocol_id = ICE_VLAN_OF_HW;
+}
+
/**
* ice_prot_type_to_id - get protocol ID from protocol type
* @type: protocol type
diff --git a/drivers/net/ice/base/ice_switch.h b/drivers/net/ice/base/ice_switch.h
index 78e6be35a9..dd50820430 100644
--- a/drivers/net/ice/base/ice_switch.h
+++ b/drivers/net/ice/base/ice_switch.h
@@ -536,4 +536,5 @@ bool ice_is_prof_rule(enum ice_sw_tunnel_type type);
enum ice_status
ice_update_recipe_lkup_idx(struct ice_hw *hw,
struct ice_update_recipe_lkup_idx_params *params);
+void ice_change_proto_id_to_dvm(void);
#endif /* _ICE_SWITCH_H_ */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 10/18] net/ice/base: refactor post DDP download VLAN mode config
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (8 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 09/18] net/ice/base: change protocol ID for VLAN in DVM Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 11/18] net/ice/base: log if DDP/FW do not support QinQ Haiyue Wang
` (8 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 5ade55ab43e6c07a904c03ebe2d796fdea94e7e0 ]
Currently it's not clear that only the first PF downloads the package
and configures the VLAN mode. When this is happening all other PFs are
blocked on the global configuration lock. Once the package is
successfully downloaded and the global configuration lock has been
released then all PFs resume initialization. This includes some post
package download VLAN mode configuration. To make this more obvious add
the new function ice_post_pkg_dwnld_vlan_mode_cfg() so any/all post
download VLAN mode configuration code can be put in here.
This also makes it more clear that all PFs will call this new function.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_flex_pipe.c | 5 +----
drivers/net/ice/base/ice_vlan_mode.c | 23 ++++++++++++++++++++++-
drivers/net/ice/base/ice_vlan_mode.h | 2 +-
3 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index a92c2b8494..e04b863de3 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1164,10 +1164,7 @@ ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
status = ice_dwnld_cfg_bufs(hw, ice_buf_tbl->buf_array,
LE32_TO_CPU(ice_buf_tbl->buf_count));
- ice_cache_vlan_mode(hw);
-
- if (ice_is_dvm_ena(hw))
- ice_change_proto_id_to_dvm();
+ ice_post_pkg_dwnld_vlan_mode_cfg(hw);
return status;
}
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 4a749cb9f1..4340189355 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -125,7 +125,7 @@ bool ice_is_dvm_ena(struct ice_hw *hw)
* configuration lock has been released because all ports on a device need to
* cache the VLAN mode.
*/
-void ice_cache_vlan_mode(struct ice_hw *hw)
+static void ice_cache_vlan_mode(struct ice_hw *hw)
{
hw->dvm_ena = ice_aq_is_dvm_ena(hw) ? true : false;
}
@@ -375,3 +375,24 @@ enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
return ice_set_svm(hw);
}
+
+/**
+ * ice_post_pkg_dwnld_vlan_mode_cfg - configure VLAN mode after DDP download
+ * @hw: pointer to the HW structure
+ *
+ * This function is meant to configure any VLAN mode specific functionality
+ * after the global configuration lock has been released and the DDP has been
+ * downloaded.
+ *
+ * Since only one PF downloads the DDP and configures the VLAN mode there needs
+ * to be a way to configure the other PFs after the DDP has been downloaded and
+ * the global configuration lock has been released. All such code should go in
+ * this function.
+ */
+void ice_post_pkg_dwnld_vlan_mode_cfg(struct ice_hw *hw)
+{
+ ice_cache_vlan_mode(hw);
+
+ if (ice_is_dvm_ena(hw))
+ ice_change_proto_id_to_dvm();
+}
diff --git a/drivers/net/ice/base/ice_vlan_mode.h b/drivers/net/ice/base/ice_vlan_mode.h
index 134bd41635..c22d6c2a01 100644
--- a/drivers/net/ice/base/ice_vlan_mode.h
+++ b/drivers/net/ice/base/ice_vlan_mode.h
@@ -10,7 +10,7 @@
struct ice_hw;
bool ice_is_dvm_ena(struct ice_hw *hw);
-void ice_cache_vlan_mode(struct ice_hw *hw);
enum ice_status ice_set_vlan_mode(struct ice_hw *hw);
+void ice_post_pkg_dwnld_vlan_mode_cfg(struct ice_hw *hw);
#endif /* _ICE_VLAN_MODE_H */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 11/18] net/ice/base: log if DDP/FW do not support QinQ
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (9 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 10/18] net/ice/base: refactor post DDP download VLAN mode config Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 12/18] net/ice/base: add ethertype offset for QinQ dummy packet Haiyue Wang
` (7 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit daa2ca4217ec6bf4fafb84f78985014b20cf5444 ]
Currently if the driver supports QinQ there is no message/information
if the DDP and/or FW don't support QinQ. Add functionality that prints
if the DDP and/or FW don't support QinQ if the driver attempts to
configured DVM. This will make it more obvious to users in the field
that they need to update their DDP and/or FW.
This required a small refactor so some of the existing code could be
shared and used by this new print functionality.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_vlan_mode.c | 77 +++++++++++++++++++++++-----
1 file changed, 65 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 4340189355..775ebb2d6e 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -131,18 +131,11 @@ static void ice_cache_vlan_mode(struct ice_hw *hw)
}
/**
- * ice_is_dvm_supported - check if Double VLAN Mode is supported
- * @hw: pointer to the hardware structure
- *
- * Returns true if Double VLAN Mode (DVM) is supported and false if only Single
- * VLAN Mode (SVM) is supported. In order for DVM to be supported the DDP and
- * firmware must support it, otherwise only SVM is supported. This function
- * should only be called while the global config lock is held and after the
- * package has been successfully downloaded.
+ * ice_pkg_supports_dvm - find out if DDP supports DVM
+ * @hw: pointer to the HW structure
*/
-static bool ice_is_dvm_supported(struct ice_hw *hw)
+static bool ice_pkg_supports_dvm(struct ice_hw *hw)
{
- struct ice_aqc_get_vlan_mode get_vlan_mode = { 0 };
enum ice_status status;
bool pkg_supports_dvm;
@@ -153,8 +146,17 @@ static bool ice_is_dvm_supported(struct ice_hw *hw)
return false;
}
- if (!pkg_supports_dvm)
- return false;
+ return pkg_supports_dvm;
+}
+
+/**
+ * ice_fw_supports_dvm - find out if FW supports DVM
+ * @hw: pointer to the HW structure
+ */
+static bool ice_fw_supports_dvm(struct ice_hw *hw)
+{
+ struct ice_aqc_get_vlan_mode get_vlan_mode = { 0 };
+ enum ice_status status;
/* If firmware returns success, then it supports DVM, else it only
* supports SVM
@@ -169,6 +171,31 @@ static bool ice_is_dvm_supported(struct ice_hw *hw)
return true;
}
+/**
+ * ice_is_dvm_supported - check if Double VLAN Mode is supported
+ * @hw: pointer to the hardware structure
+ *
+ * Returns true if Double VLAN Mode (DVM) is supported and false if only Single
+ * VLAN Mode (SVM) is supported. In order for DVM to be supported the DDP and
+ * firmware must support it, otherwise only SVM is supported. This function
+ * should only be called while the global config lock is held and after the
+ * package has been successfully downloaded.
+ */
+static bool ice_is_dvm_supported(struct ice_hw *hw)
+{
+ if (!ice_pkg_supports_dvm(hw)) {
+ ice_debug(hw, ICE_DBG_PKG, "DDP doesn't support DVM\n");
+ return false;
+ }
+
+ if (!ice_fw_supports_dvm(hw)) {
+ ice_debug(hw, ICE_DBG_PKG, "FW doesn't support DVM\n");
+ return false;
+ }
+
+ return true;
+}
+
#define ICE_EXTERNAL_VLAN_ID_FV_IDX 11
#define ICE_SW_LKUP_VLAN_LOC_LKUP_IDX 1
#define ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX 2
@@ -376,6 +403,30 @@ enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
return ice_set_svm(hw);
}
+/**
+ * ice_print_dvm_not_supported - print if DDP and/or FW doesn't support DVM
+ * @hw: pointer to the HW structure
+ *
+ * The purpose of this function is to print that QinQ is not supported due to
+ * incompatibilty from the DDP and/or FW. This will give a hint to the user to
+ * update one and/or both components if they expect QinQ functionality.
+ */
+static void ice_print_dvm_not_supported(struct ice_hw *hw)
+{
+ bool pkg_supports_dvm = ice_pkg_supports_dvm(hw);
+ bool fw_supports_dvm = ice_fw_supports_dvm(hw);
+
+ if (!fw_supports_dvm && !pkg_supports_dvm)
+ ice_info(hw, "QinQ functionality cannot be enabled on this device. "
+ "Update your DDP package and NVM to versions that support QinQ.\n");
+ else if (!pkg_supports_dvm)
+ ice_info(hw, "QinQ functionality cannot be enabled on this device. "
+ "Update your DDP package to a version that supports QinQ.\n");
+ else if (!fw_supports_dvm)
+ ice_info(hw, "QinQ functionality cannot be enabled on this device. "
+ "Update your NVM to a version that supports QinQ.\n");
+}
+
/**
* ice_post_pkg_dwnld_vlan_mode_cfg - configure VLAN mode after DDP download
* @hw: pointer to the HW structure
@@ -395,4 +446,6 @@ void ice_post_pkg_dwnld_vlan_mode_cfg(struct ice_hw *hw)
if (ice_is_dvm_ena(hw))
ice_change_proto_id_to_dvm();
+ else
+ ice_print_dvm_not_supported(hw);
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 12/18] net/ice/base: add ethertype offset for QinQ dummy packet
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (10 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 11/18] net/ice/base: log if DDP/FW do not support QinQ Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [PATCH 20.11 v1 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter Haiyue Wang
` (6 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Yuying Zhang, Qiming Yang
From: Yuying Zhang <yuying.zhang@intel.com>
[ upstream commit 0c0735ff4fc15e227631cbfe3fd31e33e42b34fc ]
Add the ethertype offset for QinQ switch rule dummy packet to
allow matching the corresponding field.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/base/ice_switch.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 55bfc3e6c5..887b35ac47 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -1205,6 +1205,7 @@ static const u8 dummy_ipv6_l2tpv3_pkt[] = {
static const struct ice_dummy_pkt_offsets dummy_qinq_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_IPV4_OFOS, 22 },
@@ -1215,7 +1216,8 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
- 0x91, 0x00,
+
+ 0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
0x00, 0x00, 0x08, 0x00, /* ICE_VLAN_OFOS 18 */
@@ -1234,6 +1236,7 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
static const struct ice_dummy_pkt_offsets dummy_qinq_ipv6_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_IPV6_OFOS, 22 },
@@ -1244,7 +1247,8 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
- 0x91, 0x00,
+
+ 0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
0x00, 0x00, 0x86, 0xDD, /* ICE_VLAN_OFOS 18 */
@@ -1271,6 +1275,7 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
static const struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_PPPOE, 22 },
@@ -1280,6 +1285,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_offsets[] = {
static const
struct ice_dummy_pkt_offsets dummy_qinq_pppoe_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_PPPOE, 22 },
@@ -1291,7 +1297,8 @@ static const u8 dummy_qinq_pppoe_ipv4_pkt[] = {
0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
- 0x91, 0x00,
+
+ 0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_OFOS 18 */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [PATCH 20.11 v1 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (11 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 12/18] net/ice/base: add ethertype offset for QinQ dummy packet Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection Haiyue Wang
` (5 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Haiyue Wang, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 0475c7770502cb4166b2577df3ff446af9d85515 ]
Since VLAN protocol type 'ICE_VLAN_OFOS' has been changed to map
the hardware VLAN protocol ID to 'ICE_VLAN_OF_HW (16)' when in Double
VLAN mode, and to 'ICE_VLAN_OL_HW (17)' when in Single VLAN mode.
So 'ICE_VLAN_OFOS' can't be used with 'ICE_VLAN_EX' which is outer VLAN
hardware protocol ID 'ICE_VLAN_OF_HW (16)' to do the QinQ VLAN pattern.
Introduce the new inner VLAN protocol type 'ICE_VLAN_IN', which is inner
VLAN hardware protocol ID 'ICE_VLAN_OL_HW (17)'.
Now for QinQ VLAN pattern, the protocol 'ICE_VLAN_EX' and 'ICE_VLAN_IN'
should be used to set the related protocol header fields like VLAN ID.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_protocol_type.h | 1 +
drivers/net/ice/base/ice_switch.c | 23 +++++++++++++----------
2 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ice/base/ice_protocol_type.h b/drivers/net/ice/base/ice_protocol_type.h
index e8caefd8f9..5dc795868e 100644
--- a/drivers/net/ice/base/ice_protocol_type.h
+++ b/drivers/net/ice/base/ice_protocol_type.h
@@ -53,6 +53,7 @@ enum ice_protocol_type {
ICE_NAT_T,
ICE_GTP_NO_PAY,
ICE_VLAN_EX,
+ ICE_VLAN_IN,
ICE_PROTOCOL_LAST
};
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 887b35ac47..9d8dc88844 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -1207,7 +1207,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_IPV4_OFOS, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1220,7 +1220,7 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x08, 0x00, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x08, 0x00, /* ICE_VLAN_IN 18 */
0x45, 0x00, 0x00, 0x1c, /* ICE_IPV4_OFOS 22 */
0x00, 0x01, 0x00, 0x00,
@@ -1238,7 +1238,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_ipv6_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_IPV6_OFOS, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1251,7 +1251,7 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x86, 0xDD, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x86, 0xDD, /* ICE_VLAN_IN 18 */
0x60, 0x00, 0x00, 0x00, /* ICE_IPV6_OFOS 22 */
0x00, 0x10, 0x11, 0x00, /* Next header UDP */
@@ -1277,7 +1277,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_PPPOE, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1287,7 +1287,7 @@ struct ice_dummy_pkt_offsets dummy_qinq_pppoe_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_PPPOE, 22 },
{ ICE_IPV4_OFOS, 30 },
{ ICE_PROTOCOL_LAST, 0 },
@@ -1301,14 +1301,14 @@ static const u8 dummy_qinq_pppoe_ipv4_pkt[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_IN 18 */
0x11, 0x00, 0x00, 0x00, /* ICE_PPPOE 22 */
0x00, 0x16,
0x00, 0x21, /* PPP Link Layer 28 */
- 0x45, 0x00, 0x00, 0x14, /* ICE_IPV4_IL 30 */
+ 0x45, 0x00, 0x00, 0x14, /* ICE_IPV4_OFOS 30 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
@@ -1322,7 +1322,7 @@ struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_ipv6_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14},
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_PPPOE, 22 },
{ ICE_IPV6_OFOS, 30 },
{ ICE_PROTOCOL_LAST, 0 },
@@ -1336,7 +1336,7 @@ static const u8 dummy_qinq_pppoe_ipv6_packet[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_IN 18 */
0x11, 0x00, 0x00, 0x00, /* ICE_PPPOE 22 */
0x00, 0x2a,
@@ -6126,6 +6126,7 @@ static const struct ice_prot_ext_tbl_entry ice_prot_ext[ICE_PROTOCOL_LAST] = {
{ ICE_NAT_T, { 8, 10, 12, 14 } },
{ ICE_GTP_NO_PAY, { 8, 10, 12, 14 } },
{ ICE_VLAN_EX, { 0, 2 } },
+ { ICE_VLAN_IN, { 0, 2 } },
};
/* The following table describes preferred grouping of recipes.
@@ -6160,6 +6161,7 @@ static struct ice_protocol_entry ice_prot_id_tbl[ICE_PROTOCOL_LAST] = {
{ ICE_NAT_T, ICE_UDP_ILOS_HW },
{ ICE_GTP_NO_PAY, ICE_UDP_ILOS_HW },
{ ICE_VLAN_EX, ICE_VLAN_OF_HW },
+ { ICE_VLAN_IN, ICE_VLAN_OL_HW },
};
/**
@@ -7728,6 +7730,7 @@ ice_fill_adv_dummy_packet(struct ice_adv_lkup_elem *lkups, u16 lkups_cnt,
break;
case ICE_VLAN_OFOS:
case ICE_VLAN_EX:
+ case ICE_VLAN_IN:
len = sizeof(struct ice_vlan_hdr);
break;
case ICE_IPV4_OFOS:
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (12 preceding siblings ...)
2021-06-11 6:58 ` [PATCH 20.11 v1 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 15/18] net/ice: fix VLAN strip for double VLAN Haiyue Wang
` (4 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Yuying Zhang, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 03697c24b7cafbd6c536204ba6470698fcf8c5e0 ]
The dummy packet should be QinQ PPPoE ipv6 when ppp protocol is ipv6.
Fixes: bb3386f348dd ("net/ice: enable QinQ filter for switch")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_switch.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 9d8dc88844..d5576267b8 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -7403,6 +7403,11 @@ ice_find_dummy_packet(struct ice_adv_lkup_elem *lkups, u16 lkups_cnt,
*pkt_len = sizeof(dummy_qinq_pppoe_ipv4_pkt);
*offsets = dummy_qinq_pppoe_ipv4_packet_offsets;
return;
+ } else if (tun_type == ICE_SW_TUN_PPPOE_QINQ && ipv6) {
+ *pkt = dummy_qinq_pppoe_ipv6_packet;
+ *pkt_len = sizeof(dummy_qinq_pppoe_ipv6_packet);
+ *offsets = dummy_qinq_pppoe_packet_offsets;
+ return;
} else if (tun_type == ICE_SW_TUN_PPPOE_QINQ ||
tun_type == ICE_SW_TUN_PPPOE_PAY_QINQ) {
*pkt = dummy_qinq_pppoe_ipv4_pkt;
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 15/18] net/ice: fix VLAN strip for double VLAN
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (13 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 16/18] net/ice: fix VLAN 0 adding based on VLAN mode Haiyue Wang
` (3 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Haiyue Wang, Qiming Yang
[ upstream commit 8ac4307504bed19ce68b39bc2703975ee0b9ab81 ]
VLAN strip was failing for double VLAN because of hardware
configuration, resulting mbuf not having the vlan_tci information.
Adjusted the strip setting according to current VLAN mode to fix the
VLAN strip.
Fixes: 14e7a4b37b4f ("net/ice/base: support configuring device in double VLAN mode")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/ice_ethdev.c | 297 +++++++++++++++--------------------
1 file changed, 131 insertions(+), 166 deletions(-)
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 7f78cd36cd..9071bd5d4f 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -70,8 +70,6 @@ static struct proto_xtr_ol_flag ice_proto_xtr_ol_flag_params[] = {
.ol_flag = &rte_net_ice_dynflag_proto_xtr_ip_offset_mask },
};
-#define ICE_DFLT_OUTER_TAG_TYPE ICE_AQ_VSI_OUTER_TAG_VLAN_9100
-
#define ICE_OS_DEFAULT_PKG_NAME "ICE OS Default Package"
#define ICE_COMMS_PKG_NAME "ICE COMMS Package"
#define ICE_MAX_RES_DESC_NUM 1024
@@ -1119,127 +1117,6 @@ ice_remove_all_mac_vlan_filters(struct ice_vsi *vsi)
return ret;
}
-static int
-ice_vsi_config_qinq_insertion(struct ice_vsi *vsi, bool on)
-{
- struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
- struct ice_vsi_ctx ctxt;
- uint8_t qinq_flags;
- int ret = 0;
-
- /* Check if it has been already on or off */
- if (vsi->info.valid_sections &
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
- if (on) {
- if ((vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST) ==
- ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST)
- return 0; /* already on */
- } else {
- if (!(vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST))
- return 0; /* already off */
- }
- }
-
- if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST;
- else
- qinq_flags = 0;
- /* clear global insertion and use per packet insertion */
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT);
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST);
- vsi->info.outer_vlan_flags |= qinq_flags;
- /* use default vlan type 0x8100 */
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
- ICE_AQ_VSI_OUTER_TAG_TYPE_S;
- (void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
- ctxt.info.valid_sections =
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
- ctxt.vsi_num = vsi->vsi_id;
- ret = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
- if (ret) {
- PMD_DRV_LOG(INFO,
- "Update VSI failed to %s qinq stripping",
- on ? "enable" : "disable");
- return -EINVAL;
- }
-
- vsi->info.valid_sections |=
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
-
- return ret;
-}
-
-static int
-ice_vsi_config_qinq_stripping(struct ice_vsi *vsi, bool on)
-{
- struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
- struct ice_vsi_ctx ctxt;
- uint8_t qinq_flags;
- int ret = 0;
-
- /* Check if it has been already on or off */
- if (vsi->info.valid_sections &
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
- if (on) {
- if ((vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW)
- return 0; /* already on */
- } else {
- if ((vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH)
- return 0; /* already off */
- }
- }
-
- if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW;
- else
- qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH;
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_EMODE_M);
- vsi->info.outer_vlan_flags |= qinq_flags;
- /* use default vlan type 0x8100 */
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
- ICE_AQ_VSI_OUTER_TAG_TYPE_S;
- (void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
- ctxt.info.valid_sections =
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
- ctxt.vsi_num = vsi->vsi_id;
- ret = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
- if (ret) {
- PMD_DRV_LOG(INFO,
- "Update VSI failed to %s qinq stripping",
- on ? "enable" : "disable");
- return -EINVAL;
- }
-
- vsi->info.valid_sections |=
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
-
- return ret;
-}
-
-static int
-ice_vsi_config_double_vlan(struct ice_vsi *vsi, int on)
-{
- int ret;
-
- ret = ice_vsi_config_qinq_stripping(vsi, on);
- if (ret)
- PMD_DRV_LOG(ERR, "Fail to set qinq stripping - %d", ret);
-
- ret = ice_vsi_config_qinq_insertion(vsi, on);
- if (ret)
- PMD_DRV_LOG(ERR, "Fail to set qinq insertion - %d", ret);
-
- return ret;
-}
-
/* Enable IRQ0 */
static void
ice_pf_enable_irq0(struct ice_hw *hw)
@@ -2227,9 +2104,6 @@ ice_dev_init(struct rte_eth_dev *dev)
vsi = pf->main_vsi;
- /* Disable double vlan by default */
- ice_vsi_config_double_vlan(vsi, false);
-
ret = ice_aq_stop_lldp(hw, true, false, NULL);
if (ret != ICE_SUCCESS)
PMD_INIT_LOG(DEBUG, "lldp has already stopped\n");
@@ -4089,49 +3963,147 @@ ice_vsi_config_vlan_filter(struct ice_vsi *vsi, bool on)
return 0;
}
+/* Manage VLAN stripping for the VSI for Rx */
static int
-ice_vsi_config_vlan_stripping(struct ice_vsi *vsi, bool on)
+ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
{
struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
struct ice_vsi_ctx ctxt;
- uint8_t vlan_flags;
- int ret = 0;
+ enum ice_status status;
+ int err = 0;
- /* Check if it has been already on or off */
- if (vsi->info.valid_sections &
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID)) {
- if (on) {
- if ((vsi->info.inner_vlan_flags &
- ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH)
- return 0; /* already on */
- } else {
- if ((vsi->info.inner_vlan_flags &
- ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING)
- return 0; /* already off */
- }
- }
+ /* do not allow modifying VLAN stripping when a port VLAN is configured
+ * on this VSI
+ */
+ if (vsi->info.port_based_inner_vlan)
+ return 0;
- if (on)
- vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
+ memset(&ctxt, 0, sizeof(ctxt));
+
+ if (ena)
+ /* Strip VLAN tag from Rx packet and put it in the desc */
+ ctxt.info.inner_vlan_flags =
+ ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
else
- vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
- vsi->info.inner_vlan_flags &= ~(ICE_AQ_VSI_INNER_VLAN_EMODE_M);
- vsi->info.inner_vlan_flags |= vlan_flags;
- (void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
+ /* Disable stripping. Leave tag in packet */
+ ctxt.info.inner_vlan_flags =
+ ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+
+ /* Allow all packets untagged/tagged */
+ ctxt.info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
+
+ ctxt.info.valid_sections = rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
+
+ status = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
+ if (status) {
+ PMD_DRV_LOG(ERR, "Update VSI failed to %s vlan stripping",
+ ena ? "enable" : "disable");
+ err = -EIO;
+ } else {
+ vsi->info.inner_vlan_flags = ctxt.info.inner_vlan_flags;
+ }
+
+ return err;
+}
+
+static int
+ice_vsi_ena_inner_stripping(struct ice_vsi *vsi)
+{
+ return ice_vsi_manage_vlan_stripping(vsi, true);
+}
+
+static int
+ice_vsi_dis_inner_stripping(struct ice_vsi *vsi)
+{
+ return ice_vsi_manage_vlan_stripping(vsi, false);
+}
+
+static int ice_vsi_ena_outer_stripping(struct ice_vsi *vsi)
+{
+ struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+ struct ice_vsi_ctx ctxt;
+ enum ice_status status;
+ int err = 0;
+
+ /* do not allow modifying VLAN stripping when a port VLAN is configured
+ * on this VSI
+ */
+ if (vsi->info.port_based_outer_vlan)
+ return 0;
+
+ memset(&ctxt, 0, sizeof(ctxt));
+
ctxt.info.valid_sections =
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
- ctxt.vsi_num = vsi->vsi_id;
- ret = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
- if (ret) {
- PMD_DRV_LOG(INFO, "Update VSI failed to %s vlan stripping",
- on ? "enable" : "disable");
- return -EINVAL;
+ rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
+ /* clear current outer VLAN strip settings */
+ ctxt.info.outer_vlan_flags = vsi->info.outer_vlan_flags &
+ ~(ICE_AQ_VSI_OUTER_VLAN_EMODE_M | ICE_AQ_VSI_OUTER_TAG_TYPE_M);
+ ctxt.info.outer_vlan_flags |=
+ (ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH <<
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_S) |
+ (ICE_AQ_VSI_OUTER_TAG_VLAN_8100 <<
+ ICE_AQ_VSI_OUTER_TAG_TYPE_S);
+
+ status = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
+ if (status) {
+ PMD_DRV_LOG(ERR, "Update VSI failed to enable outer VLAN stripping");
+ err = -EIO;
+ } else {
+ vsi->info.outer_vlan_flags = ctxt.info.outer_vlan_flags;
}
- vsi->info.valid_sections |=
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
+ return err;
+}
+
+static int
+ice_vsi_dis_outer_stripping(struct ice_vsi *vsi)
+{
+ struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+ struct ice_vsi_ctx ctxt;
+ enum ice_status status;
+ int err = 0;
+
+ if (vsi->info.port_based_outer_vlan)
+ return 0;
+
+ memset(&ctxt, 0, sizeof(ctxt));
+
+ ctxt.info.valid_sections =
+ rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
+ /* clear current outer VLAN strip settings */
+ ctxt.info.outer_vlan_flags = vsi->info.outer_vlan_flags &
+ ~ICE_AQ_VSI_OUTER_VLAN_EMODE_M;
+ ctxt.info.outer_vlan_flags |= ICE_AQ_VSI_OUTER_VLAN_EMODE_NOTHING <<
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_S;
+
+ status = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
+ if (status) {
+ PMD_DRV_LOG(ERR, "Update VSI failed to disable outer VLAN stripping");
+ err = -EIO;
+ } else {
+ vsi->info.outer_vlan_flags = ctxt.info.outer_vlan_flags;
+ }
+
+ return err;
+}
+
+static int
+ice_vsi_config_vlan_stripping(struct ice_vsi *vsi, bool ena)
+{
+ struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+ int ret;
+
+ if (ice_is_dvm_ena(hw)) {
+ if (ena)
+ ret = ice_vsi_ena_outer_stripping(vsi);
+ else
+ ret = ice_vsi_dis_outer_stripping(vsi);
+ } else {
+ if (ena)
+ ret = ice_vsi_ena_inner_stripping(vsi);
+ else
+ ret = ice_vsi_dis_inner_stripping(vsi);
+ }
return ret;
}
@@ -4158,13 +4130,6 @@ ice_vlan_offload_set(struct rte_eth_dev *dev, int mask)
ice_vsi_config_vlan_stripping(vsi, false);
}
- if (mask & ETH_VLAN_EXTEND_MASK) {
- if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)
- ice_vsi_config_double_vlan(vsi, true);
- else
- ice_vsi_config_double_vlan(vsi, false);
- }
-
return 0;
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 16/18] net/ice: fix VLAN 0 adding based on VLAN mode
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (14 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 15/18] net/ice: fix VLAN strip for double VLAN Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 17/18] net/ice: enable QinQ filter for switch Haiyue Wang
` (2 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Haiyue Wang, Qiming Yang
[ upstream commit 295b34f55b001bceb27d9177b55326ccda49351b ]
In Single VLAN Mode, single VLAN filters via ICE_SW_LKUP_VLAN are based
on the inner VLAN ID, so the VLAN TPID (i.e. 0x8100 or 0x888a8) doesn't
matter.
In Double VLAN Mode, outer/single VLAN filters via ICE_SW_LKUP_VLAN are
based on the outer/single VLAN ID + VLAN TPID.
For both modes, adding a VLAN 0 + no VLAN TPID filter to handle untagged
traffic when VLAN pruning is enabled. Also, this handles VLAN 0 priority
tagged traffic in Single VLAN Mode, since the VLAN TPID is not part of
filtering.
If Double VLAN Mode is enabled then an explicit VLAN 0 + VLAN TPID filter
needs to be added to allow VLAN 0 priority tagged traffic in DVM, since
the VLAN TPID is part of filtering.
Fixes: 14e7a4b37b4f ("net/ice/base: support configuring device in double VLAN mode")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/ice_ethdev.c | 136 +++++++++++++++++++++++++++++------
drivers/net/ice/ice_ethdev.h | 10 ++-
2 files changed, 123 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 9071bd5d4f..5a1e775718 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -944,12 +944,13 @@ ice_remove_mac_filter(struct ice_vsi *vsi, struct rte_ether_addr *mac_addr)
/* Find out specific VLAN filter */
static struct ice_vlan_filter *
-ice_find_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
+ice_find_vlan_filter(struct ice_vsi *vsi, struct ice_vlan *vlan)
{
struct ice_vlan_filter *f;
TAILQ_FOREACH(f, &vsi->vlan_list, next) {
- if (vlan_id == f->vlan_info.vlan_id)
+ if (vlan->tpid == f->vlan_info.vlan.tpid &&
+ vlan->vid == f->vlan_info.vlan.vid)
return f;
}
@@ -957,7 +958,7 @@ ice_find_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
}
static int
-ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
+ice_add_vlan_filter(struct ice_vsi *vsi, struct ice_vlan *vlan)
{
struct ice_fltr_list_entry *v_list_itr = NULL;
struct ice_vlan_filter *f;
@@ -965,13 +966,13 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
struct ice_hw *hw;
int ret = 0;
- if (!vsi || vlan_id > RTE_ETHER_MAX_VLAN_ID)
+ if (!vsi || vlan->vid > RTE_ETHER_MAX_VLAN_ID)
return -EINVAL;
hw = ICE_VSI_TO_HW(vsi);
/* If it's added and configured, return. */
- f = ice_find_vlan_filter(vsi, vlan_id);
+ f = ice_find_vlan_filter(vsi, vlan);
if (f) {
PMD_DRV_LOG(INFO, "This VLAN filter already exists.");
return 0;
@@ -988,7 +989,9 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
ret = -ENOMEM;
goto DONE;
}
- v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan_id;
+ v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan->vid;
+ v_list_itr->fltr_info.l_data.vlan.tpid = vlan->tpid;
+ v_list_itr->fltr_info.l_data.vlan.tpid_valid = true;
v_list_itr->fltr_info.src_id = ICE_SRC_ID_VSI;
v_list_itr->fltr_info.fltr_act = ICE_FWD_TO_VSI;
v_list_itr->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
@@ -1012,7 +1015,8 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
ret = -ENOMEM;
goto DONE;
}
- f->vlan_info.vlan_id = vlan_id;
+ f->vlan_info.vlan.tpid = vlan->tpid;
+ f->vlan_info.vlan.vid = vlan->vid;
TAILQ_INSERT_TAIL(&vsi->vlan_list, f, next);
vsi->vlan_num++;
@@ -1024,7 +1028,7 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
}
static int
-ice_remove_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
+ice_remove_vlan_filter(struct ice_vsi *vsi, struct ice_vlan *vlan)
{
struct ice_fltr_list_entry *v_list_itr = NULL;
struct ice_vlan_filter *f;
@@ -1032,17 +1036,13 @@ ice_remove_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
struct ice_hw *hw;
int ret = 0;
- /**
- * Vlan 0 is the generic filter for untagged packets
- * and can't be removed.
- */
- if (!vsi || vlan_id == 0 || vlan_id > RTE_ETHER_MAX_VLAN_ID)
+ if (!vsi || vlan->vid > RTE_ETHER_MAX_VLAN_ID)
return -EINVAL;
hw = ICE_VSI_TO_HW(vsi);
/* Can't find it, return an error */
- f = ice_find_vlan_filter(vsi, vlan_id);
+ f = ice_find_vlan_filter(vsi, vlan);
if (!f)
return -EINVAL;
@@ -1055,7 +1055,9 @@ ice_remove_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
goto DONE;
}
- v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan_id;
+ v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan->vid;
+ v_list_itr->fltr_info.l_data.vlan.tpid = vlan->tpid;
+ v_list_itr->fltr_info.l_data.vlan.tpid_valid = true;
v_list_itr->fltr_info.src_id = ICE_SRC_ID_VSI;
v_list_itr->fltr_info.fltr_act = ICE_FWD_TO_VSI;
v_list_itr->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
@@ -1106,7 +1108,7 @@ ice_remove_all_mac_vlan_filters(struct ice_vsi *vsi)
return 0;
TAILQ_FOREACH_SAFE(v_f, &vsi->vlan_list, next, temp) {
- ret = ice_remove_vlan_filter(vsi, v_f->vlan_info.vlan_id);
+ ret = ice_remove_vlan_filter(vsi, &v_f->vlan_info.vlan);
if (ret != ICE_SUCCESS) {
ret = -EINVAL;
goto DONE;
@@ -1463,6 +1465,16 @@ ice_setup_vsi(struct ice_pf *pf, enum ice_vsi_type type)
vsi_ctx.info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
vsi_ctx.info.q_opt_rss = ICE_AQ_VSI_Q_OPT_RSS_LUT_PF |
ICE_AQ_VSI_Q_OPT_RSS_TPLZ;
+ if (ice_is_dvm_ena(hw)) {
+ vsi_ctx.info.outer_vlan_flags =
+ (ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ALL <<
+ ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S) &
+ ICE_AQ_VSI_OUTER_VLAN_TX_MODE_M;
+ vsi_ctx.info.outer_vlan_flags |=
+ (ICE_AQ_VSI_OUTER_TAG_VLAN_8100 <<
+ ICE_AQ_VSI_OUTER_TAG_TYPE_S) &
+ ICE_AQ_VSI_OUTER_TAG_TYPE_M;
+ }
/* FDIR */
cfg = ICE_AQ_VSI_PROP_SECURITY_VALID |
@@ -1696,10 +1708,11 @@ ice_load_pkg_type(struct ice_hw *hw)
else
package_type = ICE_PKG_TYPE_UNKNOWN;
- PMD_INIT_LOG(NOTICE, "Active package is: %d.%d.%d.%d, %s",
+ PMD_INIT_LOG(NOTICE, "Active package is: %d.%d.%d.%d, %s (%s VLAN mode)",
hw->active_pkg_ver.major, hw->active_pkg_ver.minor,
hw->active_pkg_ver.update, hw->active_pkg_ver.draft,
- hw->active_pkg_name);
+ hw->active_pkg_name,
+ ice_is_dvm_ena(hw) ? "double" : "single");
return package_type;
}
@@ -3898,19 +3911,27 @@ static int
ice_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct ice_pf *pf = ICE_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct ice_vlan vlan = ICE_VLAN(RTE_ETHER_TYPE_VLAN, vlan_id);
struct ice_vsi *vsi = pf->main_vsi;
int ret;
PMD_INIT_FUNC_TRACE();
+ /**
+ * Vlan 0 is the generic filter for untagged packets
+ * and can't be removed or added by user.
+ */
+ if (vlan_id == 0)
+ return 0;
+
if (on) {
- ret = ice_add_vlan_filter(vsi, vlan_id);
+ ret = ice_add_vlan_filter(vsi, &vlan);
if (ret < 0) {
PMD_DRV_LOG(ERR, "Failed to add vlan filter");
return -EINVAL;
}
} else {
- ret = ice_remove_vlan_filter(vsi, vlan_id);
+ ret = ice_remove_vlan_filter(vsi, &vlan);
if (ret < 0) {
PMD_DRV_LOG(ERR, "Failed to remove vlan filter");
return -EINVAL;
@@ -3920,6 +3941,77 @@ ice_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
return 0;
}
+/* In Single VLAN Mode (SVM), single VLAN filters via ICE_SW_LKUP_VLAN are
+ * based on the inner VLAN ID, so the VLAN TPID (i.e. 0x8100 or 0x888a8)
+ * doesn't matter. In Double VLAN Mode (DVM), outer/single VLAN filters via
+ * ICE_SW_LKUP_VLAN are based on the outer/single VLAN ID + VLAN TPID.
+ *
+ * For both modes add a VLAN 0 + no VLAN TPID filter to handle untagged traffic
+ * when VLAN pruning is enabled. Also, this handles VLAN 0 priority tagged
+ * traffic in SVM, since the VLAN TPID isn't part of filtering.
+ *
+ * If DVM is enabled then an explicit VLAN 0 + VLAN TPID filter needs to be
+ * added to allow VLAN 0 priority tagged traffic in DVM, since the VLAN TPID is
+ * part of filtering.
+ */
+static int
+ice_vsi_add_vlan_zero(struct ice_vsi *vsi)
+{
+ struct ice_vlan vlan;
+ int err;
+
+ vlan = ICE_VLAN(0, 0);
+ err = ice_add_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to add VLAN ID 0");
+ return err;
+ }
+
+ /* in SVM both VLAN 0 filters are identical */
+ if (!ice_is_dvm_ena(&vsi->adapter->hw))
+ return 0;
+
+ vlan = ICE_VLAN(RTE_ETHER_TYPE_VLAN, 0);
+ err = ice_add_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to add VLAN ID 0 in double VLAN mode");
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * Delete the VLAN 0 filters in the same manner that they were added in
+ * ice_vsi_add_vlan_zero.
+ */
+static int
+ice_vsi_del_vlan_zero(struct ice_vsi *vsi)
+{
+ struct ice_vlan vlan;
+ int err;
+
+ vlan = ICE_VLAN(0, 0);
+ err = ice_remove_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to remove VLAN ID 0");
+ return err;
+ }
+
+ /* in SVM both VLAN 0 filters are identical */
+ if (!ice_is_dvm_ena(&vsi->adapter->hw))
+ return 0;
+
+ vlan = ICE_VLAN(RTE_ETHER_TYPE_VLAN, 0);
+ err = ice_remove_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to remove VLAN ID 0 in double VLAN mode");
+ return err;
+ }
+
+ return 0;
+}
+
/* Configure vlan filter on or off */
static int
ice_vsi_config_vlan_filter(struct ice_vsi *vsi, bool on)
@@ -3956,9 +4048,9 @@ ice_vsi_config_vlan_filter(struct ice_vsi *vsi, bool on)
/* consist with other drivers, allow untagged packet when vlan filter on */
if (on)
- ret = ice_add_vlan_filter(vsi, 0);
+ ret = ice_vsi_add_vlan_zero(vsi);
else
- ret = ice_remove_vlan_filter(vsi, 0);
+ ret = ice_vsi_del_vlan_zero(vsi);
return 0;
}
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index 2b03c59671..f96625f43a 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -167,11 +167,19 @@ struct ice_mac_filter {
struct ice_mac_filter_info mac_info;
};
+struct ice_vlan {
+ uint16_t tpid;
+ uint16_t vid;
+};
+
+#define ICE_VLAN(tpid, vid) \
+ ((struct ice_vlan){ tpid, vid })
+
/**
* VLAN filter structure
*/
struct ice_vlan_filter_info {
- uint16_t vlan_id;
+ struct ice_vlan vlan;
};
TAILQ_HEAD(ice_vlan_filter_list, ice_vlan_filter);
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 17/18] net/ice: enable QinQ filter for switch
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (15 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 16/18] net/ice: fix VLAN 0 adding based on VLAN mode Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 18/18] net/ice: update QinQ switch filter handling Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Junfeng Guo, Wei Zhao, Haiyue Wang, Qiming Yang
From: Junfeng Guo <junfeng.guo@intel.com>
[ upstream commit bb3386f348ddf1a32b752ca371146e6be5c56a8b ]
Enable the double VLAN support for switch QinQ filtering.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/ice_generic_flow.c | 8 +++
drivers/net/ice/ice_generic_flow.h | 1 +
drivers/net/ice/ice_switch_filter.c | 106 +++++++++++++++++++++++++---
3 files changed, 104 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ice/ice_generic_flow.c b/drivers/net/ice/ice_generic_flow.c
index 1429cbc3b6..1712d3b2ef 100644
--- a/drivers/net/ice/ice_generic_flow.c
+++ b/drivers/net/ice/ice_generic_flow.c
@@ -1455,6 +1455,14 @@ enum rte_flow_item_type pattern_eth_qinq_pppoes[] = {
RTE_FLOW_ITEM_TYPE_PPPOES,
RTE_FLOW_ITEM_TYPE_END,
};
+enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_PPPOES,
+ RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID,
+ RTE_FLOW_ITEM_TYPE_END,
+};
enum rte_flow_item_type pattern_eth_pppoes_ipv4[] = {
RTE_FLOW_ITEM_TYPE_ETH,
RTE_FLOW_ITEM_TYPE_PPPOES,
diff --git a/drivers/net/ice/ice_generic_flow.h b/drivers/net/ice/ice_generic_flow.h
index 434d2f425d..dc45d8dc61 100644
--- a/drivers/net/ice/ice_generic_flow.h
+++ b/drivers/net/ice/ice_generic_flow.h
@@ -426,6 +426,7 @@ extern enum rte_flow_item_type pattern_eth_pppoes_proto[];
extern enum rte_flow_item_type pattern_eth_vlan_pppoes[];
extern enum rte_flow_item_type pattern_eth_vlan_pppoes_proto[];
extern enum rte_flow_item_type pattern_eth_qinq_pppoes[];
+extern enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[];
extern enum rte_flow_item_type pattern_eth_pppoes_ipv4[];
extern enum rte_flow_item_type pattern_eth_vlan_pppoes_ipv4[];
extern enum rte_flow_item_type pattern_eth_qinq_pppoes_ipv4[];
diff --git a/drivers/net/ice/ice_switch_filter.c b/drivers/net/ice/ice_switch_filter.c
index 8cba6eb7b1..6dfad48694 100644
--- a/drivers/net/ice/ice_switch_filter.c
+++ b/drivers/net/ice/ice_switch_filter.c
@@ -35,11 +35,15 @@
#define ICE_SW_INSET_ETHER ( \
ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE)
#define ICE_SW_INSET_MAC_VLAN ( \
- ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE | \
- ICE_INSET_VLAN_OUTER)
+ ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE | \
+ ICE_INSET_VLAN_INNER)
+#define ICE_SW_INSET_MAC_QINQ ( \
+ ICE_SW_INSET_MAC_VLAN | ICE_INSET_VLAN_OUTER)
#define ICE_SW_INSET_MAC_IPV4 ( \
ICE_INSET_DMAC | ICE_INSET_IPV4_DST | ICE_INSET_IPV4_SRC | \
ICE_INSET_IPV4_PROTO | ICE_INSET_IPV4_TTL | ICE_INSET_IPV4_TOS)
+#define ICE_SW_INSET_MAC_QINQ_IPV4 ( \
+ ICE_SW_INSET_MAC_QINQ | ICE_SW_INSET_MAC_IPV4)
#define ICE_SW_INSET_MAC_IPV4_TCP ( \
ICE_INSET_DMAC | ICE_INSET_IPV4_DST | ICE_INSET_IPV4_SRC | \
ICE_INSET_IPV4_TTL | ICE_INSET_IPV4_TOS | \
@@ -52,6 +56,8 @@
ICE_INSET_DMAC | ICE_INSET_IPV6_DST | ICE_INSET_IPV6_SRC | \
ICE_INSET_IPV6_TC | ICE_INSET_IPV6_HOP_LIMIT | \
ICE_INSET_IPV6_NEXT_HDR)
+#define ICE_SW_INSET_MAC_QINQ_IPV6 ( \
+ ICE_SW_INSET_MAC_QINQ | ICE_SW_INSET_MAC_IPV6)
#define ICE_SW_INSET_MAC_IPV6_TCP ( \
ICE_INSET_DMAC | ICE_INSET_IPV6_DST | ICE_INSET_IPV6_SRC | \
ICE_INSET_IPV6_HOP_LIMIT | ICE_INSET_IPV6_TC | \
@@ -148,6 +154,8 @@ ice_pattern_match_item ice_switch_pattern_dist_os[] = {
ICE_SW_INSET_ETHER, ICE_INSET_NONE},
{pattern_ethertype_vlan,
ICE_SW_INSET_MAC_VLAN, ICE_INSET_NONE},
+ {pattern_ethertype_qinq,
+ ICE_SW_INSET_MAC_QINQ, ICE_INSET_NONE},
{pattern_eth_arp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4,
@@ -182,6 +190,8 @@ ice_pattern_match_item ice_switch_pattern_dist_comms[] = {
ICE_SW_INSET_ETHER, ICE_INSET_NONE},
{pattern_ethertype_vlan,
ICE_SW_INSET_MAC_VLAN, ICE_INSET_NONE},
+ {pattern_ethertype_qinq,
+ ICE_SW_INSET_MAC_QINQ, ICE_INSET_NONE},
{pattern_eth_arp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4,
@@ -262,6 +272,18 @@ ice_pattern_match_item ice_switch_pattern_dist_comms[] = {
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_pfcp,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv4,
+ ICE_SW_INSET_MAC_QINQ_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv6,
+ ICE_SW_INSET_MAC_QINQ_IPV6, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes,
+ ICE_SW_INSET_MAC_PPPOE, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_proto,
+ ICE_SW_INSET_MAC_PPPOE_PROTO, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv4,
+ ICE_SW_INSET_MAC_PPPOE_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv6,
+ ICE_SW_INSET_MAC_PPPOE_IPV6, ICE_INSET_NONE},
};
static struct
@@ -304,6 +326,8 @@ ice_pattern_match_item ice_switch_pattern_perm_comms[] = {
ICE_SW_INSET_ETHER, ICE_INSET_NONE},
{pattern_ethertype_vlan,
ICE_SW_INSET_MAC_VLAN, ICE_INSET_NONE},
+ {pattern_ethertype_qinq,
+ ICE_SW_INSET_MAC_QINQ, ICE_INSET_NONE},
{pattern_eth_arp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4,
@@ -384,6 +408,18 @@ ice_pattern_match_item ice_switch_pattern_perm_comms[] = {
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_pfcp,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv4,
+ ICE_SW_INSET_MAC_QINQ_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv6,
+ ICE_SW_INSET_MAC_QINQ_IPV6, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes,
+ ICE_SW_INSET_MAC_PPPOE, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_proto,
+ ICE_SW_INSET_MAC_PPPOE_PROTO, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv4,
+ ICE_SW_INSET_MAC_PPPOE_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv6,
+ ICE_SW_INSET_MAC_PPPOE_IPV6, ICE_INSET_NONE},
};
static int
@@ -516,6 +552,8 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
bool pppoe_elem_valid = 0;
bool pppoe_patt_valid = 0;
bool pppoe_prot_valid = 0;
+ bool inner_vlan_valid = 0;
+ bool outer_vlan_valid = 0;
bool tunnel_valid = 0;
bool profile_rule = 0;
bool nvgre_valid = 0;
@@ -1062,23 +1100,40 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
"Invalid VLAN item");
return 0;
}
+
+ if (!outer_vlan_valid &&
+ (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
+ *tun_type == ICE_NON_TUN_QINQ))
+ outer_vlan_valid = 1;
+ else if (!inner_vlan_valid &&
+ (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
+ *tun_type == ICE_NON_TUN_QINQ))
+ inner_vlan_valid = 1;
+ else if (!inner_vlan_valid)
+ inner_vlan_valid = 1;
+
if (vlan_spec && vlan_mask) {
- list[t].type = ICE_VLAN_OFOS;
+ if (outer_vlan_valid && !inner_vlan_valid) {
+ list[t].type = ICE_VLAN_EX;
+ input_set |= ICE_INSET_VLAN_OUTER;
+ } else if (inner_vlan_valid) {
+ list[t].type = ICE_VLAN_OFOS;
+ input_set |= ICE_INSET_VLAN_INNER;
+ }
+
if (vlan_mask->tci) {
list[t].h_u.vlan_hdr.vlan =
vlan_spec->tci;
list[t].m_u.vlan_hdr.vlan =
vlan_mask->tci;
- input_set |= ICE_INSET_VLAN_OUTER;
input_set_byte += 2;
}
if (vlan_mask->inner_type) {
- list[t].h_u.vlan_hdr.type =
- vlan_spec->inner_type;
- list[t].m_u.vlan_hdr.type =
- vlan_mask->inner_type;
- input_set |= ICE_INSET_ETHERTYPE;
- input_set_byte += 2;
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Invalid VLAN input set.");
+ return 0;
}
t++;
}
@@ -1380,8 +1435,27 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
}
}
+ if (*tun_type == ICE_SW_TUN_PPPOE_PAY &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_PAY_QINQ;
+ else if (*tun_type == ICE_SW_TUN_PPPOE &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_QINQ;
+ else if (*tun_type == ICE_NON_TUN &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_NON_TUN_QINQ;
+ else if (*tun_type == ICE_SW_TUN_AND_NON_TUN &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_AND_NON_TUN_QINQ;
+
if (pppoe_patt_valid && !pppoe_prot_valid) {
- if (ipv6_valid && udp_valid)
+ if (inner_vlan_valid && outer_vlan_valid && ipv4_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_IPV4_QINQ;
+ else if (inner_vlan_valid && outer_vlan_valid && ipv6_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_IPV6_QINQ;
+ else if (inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_QINQ;
+ else if (ipv6_valid && udp_valid)
*tun_type = ICE_SW_TUN_PPPOE_IPV6_UDP;
else if (ipv6_valid && tcp_valid)
*tun_type = ICE_SW_TUN_PPPOE_IPV6_TCP;
@@ -1659,6 +1733,7 @@ ice_switch_parse_pattern_action(struct ice_adapter *ad,
uint16_t lkups_num = 0;
const struct rte_flow_item *item = pattern;
uint16_t item_num = 0;
+ uint16_t vlan_num = 0;
enum ice_sw_tunnel_type tun_type =
ICE_NON_TUN;
struct ice_pattern_match_item *pattern_match_item = NULL;
@@ -1674,6 +1749,10 @@ ice_switch_parse_pattern_action(struct ice_adapter *ad,
if (eth_mask->type == UINT16_MAX)
tun_type = ICE_SW_TUN_AND_NON_TUN;
}
+
+ if (item->type == RTE_FLOW_ITEM_TYPE_VLAN)
+ vlan_num++;
+
/* reserve one more memory slot for ETH which may
* consume 2 lookup items.
*/
@@ -1681,6 +1760,11 @@ ice_switch_parse_pattern_action(struct ice_adapter *ad,
item_num++;
}
+ if (vlan_num == 2 && tun_type == ICE_SW_TUN_AND_NON_TUN)
+ tun_type = ICE_SW_TUN_AND_NON_TUN_QINQ;
+ else if (vlan_num == 2)
+ tun_type = ICE_NON_TUN_QINQ;
+
list = rte_zmalloc(NULL, item_num * sizeof(*list), 0);
if (!list) {
rte_flow_error_set(error, EINVAL,
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v1 18/18] net/ice: update QinQ switch filter handling
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (16 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 17/18] net/ice: enable QinQ filter for switch Haiyue Wang
@ 2021-06-11 6:58 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 6:58 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, Haiyue Wang, Qiming Yang
[ upstream commit 23ea199b732bf54861aaea49e52c1089334b29ae ]
The hardware outer/inner VLAN protocol types are now updated to map to
new interface VLAN protocol types, so update the application to use new
VLAN protocol types when the rte_flow is QinQ filter type.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/ice_switch_filter.c | 36 ++++++++++++++++++-----------
1 file changed, 22 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ice/ice_switch_filter.c b/drivers/net/ice/ice_switch_filter.c
index 6dfad48694..a66b6ff7e2 100644
--- a/drivers/net/ice/ice_switch_filter.c
+++ b/drivers/net/ice/ice_switch_filter.c
@@ -558,12 +558,17 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
bool profile_rule = 0;
bool nvgre_valid = 0;
bool vxlan_valid = 0;
+ bool qinq_valid = 0;
bool ipv6_valid = 0;
bool ipv4_valid = 0;
bool udp_valid = 0;
bool tcp_valid = 0;
uint16_t j, t = 0;
+ if (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
+ *tun_type == ICE_NON_TUN_QINQ)
+ qinq_valid = 1;
+
for (item = pattern; item->type !=
RTE_FLOW_ITEM_TYPE_END; item++) {
if (item->last) {
@@ -1101,22 +1106,25 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
return 0;
}
- if (!outer_vlan_valid &&
- (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
- *tun_type == ICE_NON_TUN_QINQ))
- outer_vlan_valid = 1;
- else if (!inner_vlan_valid &&
- (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
- *tun_type == ICE_NON_TUN_QINQ))
- inner_vlan_valid = 1;
- else if (!inner_vlan_valid)
- inner_vlan_valid = 1;
+ if (qinq_valid) {
+ if (!outer_vlan_valid)
+ outer_vlan_valid = 1;
+ else
+ inner_vlan_valid = 1;
+ }
if (vlan_spec && vlan_mask) {
- if (outer_vlan_valid && !inner_vlan_valid) {
- list[t].type = ICE_VLAN_EX;
- input_set |= ICE_INSET_VLAN_OUTER;
- } else if (inner_vlan_valid) {
+ if (qinq_valid) {
+ if (!inner_vlan_valid) {
+ list[t].type = ICE_VLAN_EX;
+ input_set |=
+ ICE_INSET_VLAN_OUTER;
+ } else {
+ list[t].type = ICE_VLAN_IN;
+ input_set |=
+ ICE_INSET_VLAN_INNER;
+ }
+ } else {
list[t].type = ICE_VLAN_OFOS;
input_set |= ICE_INSET_VLAN_INNER;
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (17 preceding siblings ...)
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 18/18] net/ice: update QinQ switch filter handling Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
` (18 more replies)
18 siblings, 19 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang
When LTS 20.11 was released, the Intel ice PMD has a basic VLAN offload,
which can only handle single VLAN mode for firmware limitation. Now the
firmware is updated to support double VLAN mode and single VLAN mode at
the same time. It depends on the driver to do selection at the boot time.
As VLAN protocol handling like strip, filter, flow is very common use, we
request to support the ice PMD can run on the latest firmware for enabling
the new design. This is compatible backport as the main tree.
v2: Fix the subject fix with messy code like : PATCHÂ
Haiyue Wang (4):
net/ice/base: do not set VLAN mode in DCF mode
net/ice: fix VLAN strip for double VLAN
net/ice: fix VLAN 0 adding based on VLAN mode
net/ice: update QinQ switch filter handling
Junfeng Guo (1):
net/ice: enable QinQ filter for switch
Qi Zhang (12):
net/ice/base: align add VSI and update VSI AQ command buffer
net/ice/base: add interface to support configuring VLAN mode
net/ice/base: fix outer VLAN related macro
net/ice/base: add VLAN TPID for VLAN filters
net/ice/base: support checking double VLAN mode
net/ice/base: support configuring device in double VLAN mode
net/ice/base: update boost TCAM for DVM
net/ice/base: change protocol ID for VLAN in DVM
net/ice/base: refactor post DDP download VLAN mode config
net/ice/base: log if DDP/FW do not support QinQ
net/ice/base: add inner VLAN protocol type for QinQ filter
net/ice/base: fix QinQ PPPoE dummy packet selection
Yuying Zhang (1):
net/ice/base: add ethertype offset for QinQ dummy packet
drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
drivers/net/ice/base/ice_bitops.h | 45 +++
drivers/net/ice/base/ice_common.c | 38 ++
drivers/net/ice/base/ice_common.h | 4 +
drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
drivers/net/ice/base/ice_flex_pipe.h | 12 +
drivers/net/ice/base/ice_flex_type.h | 39 ++
drivers/net/ice/base/ice_protocol_type.h | 1 +
drivers/net/ice/base/ice_switch.c | 124 +++++-
drivers/net/ice/base/ice_switch.h | 15 +
drivers/net/ice/base/ice_type.h | 4 +
drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
drivers/net/ice/base/ice_vlan_mode.h | 16 +
drivers/net/ice/base/meson.build | 1 +
drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
drivers/net/ice/ice_ethdev.h | 10 +-
drivers/net/ice/ice_generic_flow.c | 8 +
drivers/net/ice/ice_generic_flow.h | 1 +
drivers/net/ice/ice_switch_filter.c | 114 +++++-
19 files changed, 1545 insertions(+), 363 deletions(-)
create mode 100644 drivers/net/ice/base/ice_vlan_mode.c
create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 01/18] net/ice/base: align add VSI and update VSI AQ command buffer
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 02/18] net/ice/base: add interface to support configuring VLAN mode Haiyue Wang
` (17 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Shay Amir, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 9ea028123a0bef9f6bbf5dd1a5250b9bfa63c1ea ]
Aligned the buffer the following admin commands to their new
definitions:
* 0x210 = add_vsi
* 0x211 = update_vsi
Signed-off-by: Shay Amir <shay.amir@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 209 +++++++++++++-------------
drivers/net/ice/ice_ethdev.c | 88 +++++------
2 files changed, 152 insertions(+), 145 deletions(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index f715fb0910..91d360be62 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -411,144 +411,151 @@ struct ice_aqc_vsi_props {
#define ICE_AQ_VSI_SW_FLAG_SRC_PRUNE BIT(7)
u8 sw_flags2;
#define ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_S 0
-#define ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_M \
- (0xF << ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_S)
+#define ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_M (0xF << ICE_AQ_VSI_SW_FLAG_RX_PRUNE_EN_S)
#define ICE_AQ_VSI_SW_FLAG_RX_VLAN_PRUNE_ENA BIT(0)
#define ICE_AQ_VSI_SW_FLAG_LAN_ENA BIT(4)
u8 veb_stat_id;
#define ICE_AQ_VSI_SW_VEB_STAT_ID_S 0
-#define ICE_AQ_VSI_SW_VEB_STAT_ID_M (0x1F << ICE_AQ_VSI_SW_VEB_STAT_ID_S)
+#define ICE_AQ_VSI_SW_VEB_STAT_ID_M (0x1F << ICE_AQ_VSI_SW_VEB_STAT_ID_S)
#define ICE_AQ_VSI_SW_VEB_STAT_ID_VALID BIT(5)
/* security section */
u8 sec_flags;
#define ICE_AQ_VSI_SEC_FLAG_ALLOW_DEST_OVRD BIT(0)
#define ICE_AQ_VSI_SEC_FLAG_ENA_MAC_ANTI_SPOOF BIT(2)
-#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S 4
-#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_M (0xF << ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S)
+#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S 4
+#define ICE_AQ_VSI_SEC_TX_PRUNE_ENA_M (0xF << ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S)
#define ICE_AQ_VSI_SEC_TX_VLAN_PRUNE_ENA BIT(0)
u8 sec_reserved;
/* VLAN section */
- __le16 pvid; /* VLANS include priority bits */
- u8 pvlan_reserved[2];
- u8 vlan_flags;
-#define ICE_AQ_VSI_VLAN_MODE_S 0
-#define ICE_AQ_VSI_VLAN_MODE_M (0x3 << ICE_AQ_VSI_VLAN_MODE_S)
-#define ICE_AQ_VSI_VLAN_MODE_UNTAGGED 0x1
-#define ICE_AQ_VSI_VLAN_MODE_TAGGED 0x2
-#define ICE_AQ_VSI_VLAN_MODE_ALL 0x3
-#define ICE_AQ_VSI_PVLAN_INSERT_PVID BIT(2)
-#define ICE_AQ_VSI_VLAN_EMOD_S 3
-#define ICE_AQ_VSI_VLAN_EMOD_M (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_STR_BOTH (0x0 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_STR_UP (0x1 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_STR (0x2 << ICE_AQ_VSI_VLAN_EMOD_S)
-#define ICE_AQ_VSI_VLAN_EMOD_NOTHING (0x3 << ICE_AQ_VSI_VLAN_EMOD_S)
- u8 pvlan_reserved2[3];
+ __le16 port_based_inner_vlan; /* VLANS include priority bits */
+ u8 inner_vlan_reserved[2];
+ u8 inner_vlan_flags;
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_S 0
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_M (0x3 << ICE_AQ_VSI_INNER_VLAN_TX_MODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTUNTAGGED 0x1
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTTAGGED 0x2
+#define ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL 0x3
+#define ICE_AQ_VSI_INNER_VLAN_INSERT_PVID BIT(2)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_S 3
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_M (0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH (0x0 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR_UP (0x1 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_STR (0x2 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING (0x3 << ICE_AQ_VSI_INNER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_INNER_VLAN_BLOCK_TX_DESC BIT(5)
+ u8 inner_vlan_reserved2[3];
/* ingress egress up sections */
__le32 ingress_table; /* bitmap, 3 bits per up */
-#define ICE_AQ_VSI_UP_TABLE_UP0_S 0
-#define ICE_AQ_VSI_UP_TABLE_UP0_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP0_S)
-#define ICE_AQ_VSI_UP_TABLE_UP1_S 3
-#define ICE_AQ_VSI_UP_TABLE_UP1_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP1_S)
-#define ICE_AQ_VSI_UP_TABLE_UP2_S 6
-#define ICE_AQ_VSI_UP_TABLE_UP2_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP2_S)
-#define ICE_AQ_VSI_UP_TABLE_UP3_S 9
-#define ICE_AQ_VSI_UP_TABLE_UP3_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP3_S)
-#define ICE_AQ_VSI_UP_TABLE_UP4_S 12
-#define ICE_AQ_VSI_UP_TABLE_UP4_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP4_S)
-#define ICE_AQ_VSI_UP_TABLE_UP5_S 15
-#define ICE_AQ_VSI_UP_TABLE_UP5_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP5_S)
-#define ICE_AQ_VSI_UP_TABLE_UP6_S 18
-#define ICE_AQ_VSI_UP_TABLE_UP6_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP6_S)
-#define ICE_AQ_VSI_UP_TABLE_UP7_S 21
-#define ICE_AQ_VSI_UP_TABLE_UP7_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP7_S)
+#define ICE_AQ_VSI_UP_TABLE_UP0_S 0
+#define ICE_AQ_VSI_UP_TABLE_UP0_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP0_S)
+#define ICE_AQ_VSI_UP_TABLE_UP1_S 3
+#define ICE_AQ_VSI_UP_TABLE_UP1_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP1_S)
+#define ICE_AQ_VSI_UP_TABLE_UP2_S 6
+#define ICE_AQ_VSI_UP_TABLE_UP2_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP2_S)
+#define ICE_AQ_VSI_UP_TABLE_UP3_S 9
+#define ICE_AQ_VSI_UP_TABLE_UP3_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP3_S)
+#define ICE_AQ_VSI_UP_TABLE_UP4_S 12
+#define ICE_AQ_VSI_UP_TABLE_UP4_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP4_S)
+#define ICE_AQ_VSI_UP_TABLE_UP5_S 15
+#define ICE_AQ_VSI_UP_TABLE_UP5_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP5_S)
+#define ICE_AQ_VSI_UP_TABLE_UP6_S 18
+#define ICE_AQ_VSI_UP_TABLE_UP6_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP6_S)
+#define ICE_AQ_VSI_UP_TABLE_UP7_S 21
+#define ICE_AQ_VSI_UP_TABLE_UP7_M (0x7 << ICE_AQ_VSI_UP_TABLE_UP7_S)
__le32 egress_table; /* same defines as for ingress table */
/* outer tags section */
- __le16 outer_tag;
- u8 outer_tag_flags;
-#define ICE_AQ_VSI_OUTER_TAG_MODE_S 0
-#define ICE_AQ_VSI_OUTER_TAG_MODE_M (0x3 << ICE_AQ_VSI_OUTER_TAG_MODE_S)
-#define ICE_AQ_VSI_OUTER_TAG_NOTHING 0x0
-#define ICE_AQ_VSI_OUTER_TAG_REMOVE 0x1
-#define ICE_AQ_VSI_OUTER_TAG_COPY 0x2
-#define ICE_AQ_VSI_OUTER_TAG_TYPE_S 2
-#define ICE_AQ_VSI_OUTER_TAG_TYPE_M (0x3 << ICE_AQ_VSI_OUTER_TAG_TYPE_S)
-#define ICE_AQ_VSI_OUTER_TAG_NONE 0x0
-#define ICE_AQ_VSI_OUTER_TAG_STAG 0x1
-#define ICE_AQ_VSI_OUTER_TAG_VLAN_8100 0x2
-#define ICE_AQ_VSI_OUTER_TAG_VLAN_9100 0x3
-#define ICE_AQ_VSI_OUTER_TAG_INSERT BIT(4)
-#define ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST BIT(6)
- u8 outer_tag_reserved;
+ __le16 port_based_outer_vlan;
+ u8 outer_vlan_flags;
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_S 0
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_M (0x3 << ICE_AQ_VSI_OUTER_VLAN_EMODE_S)
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH 0x0
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_UP 0x1
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW 0x2
+#define ICE_AQ_VSI_OUTER_VLAN_EMODE_NOTHING 0x3
+#define ICE_AQ_VSI_OUTER_TAG_TYPE_S 2
+#define ICE_AQ_VSI_OUTER_TAG_TYPE_M (0x3 << ICE_AQ_VSI_OUTER_TAG_TYPE_S)
+#define ICE_AQ_VSI_OUTER_TAG_NONE 0x0
+#define ICE_AQ_VSI_OUTER_TAG_STAG 0x1
+#define ICE_AQ_VSI_OUTER_TAG_VLAN_8100 0x2
+#define ICE_AQ_VSI_OUTER_TAG_VLAN_9100 0x3
+#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT BIT(4)
+#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST BIT(4)
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S 5
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_M (0x3 << ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S)
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ACCEPTUNTAGGED 0x1
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ACCEPTTAGGED 0x2
+#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ALL 0x3
+#define ICE_AQ_VSI_OUTER_VLAN_BLOCK_TX_DESC BIT(7)
+ u8 outer_vlan_reserved;
/* queue mapping section */
__le16 mapping_flags;
-#define ICE_AQ_VSI_Q_MAP_CONTIG 0x0
-#define ICE_AQ_VSI_Q_MAP_NONCONTIG BIT(0)
+#define ICE_AQ_VSI_Q_MAP_CONTIG 0x0
+#define ICE_AQ_VSI_Q_MAP_NONCONTIG BIT(0)
__le16 q_mapping[16];
-#define ICE_AQ_VSI_Q_S 0
-#define ICE_AQ_VSI_Q_M (0x7FF << ICE_AQ_VSI_Q_S)
+#define ICE_AQ_VSI_Q_S 0
+#define ICE_AQ_VSI_Q_M (0x7FF << ICE_AQ_VSI_Q_S)
__le16 tc_mapping[8];
-#define ICE_AQ_VSI_TC_Q_OFFSET_S 0
-#define ICE_AQ_VSI_TC_Q_OFFSET_M (0x7FF << ICE_AQ_VSI_TC_Q_OFFSET_S)
-#define ICE_AQ_VSI_TC_Q_NUM_S 11
-#define ICE_AQ_VSI_TC_Q_NUM_M (0xF << ICE_AQ_VSI_TC_Q_NUM_S)
+#define ICE_AQ_VSI_TC_Q_OFFSET_S 0
+#define ICE_AQ_VSI_TC_Q_OFFSET_M (0x7FF << ICE_AQ_VSI_TC_Q_OFFSET_S)
+#define ICE_AQ_VSI_TC_Q_NUM_S 11
+#define ICE_AQ_VSI_TC_Q_NUM_M (0xF << ICE_AQ_VSI_TC_Q_NUM_S)
/* queueing option section */
u8 q_opt_rss;
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_S 0
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_LUT_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_VSI 0x0
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_PF 0x2
-#define ICE_AQ_VSI_Q_OPT_RSS_LUT_GBL 0x3
-#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S 2
-#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_M (0xF << ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_HASH_S 6
-#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_TPLZ (0x0 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_SYM_TPLZ (0x1 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_XOR (0x2 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
-#define ICE_AQ_VSI_Q_OPT_RSS_JHASH (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_S 0
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_LUT_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_VSI 0x0
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_PF 0x2
+#define ICE_AQ_VSI_Q_OPT_RSS_LUT_GBL 0x3
+#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S 2
+#define ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_M (0xF << ICE_AQ_VSI_Q_OPT_RSS_GBL_LUT_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_HASH_S 6
+#define ICE_AQ_VSI_Q_OPT_RSS_HASH_M (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_TPLZ (0x0 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_SYM_TPLZ (0x1 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_XOR (0x2 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
+#define ICE_AQ_VSI_Q_OPT_RSS_JHASH (0x3 << ICE_AQ_VSI_Q_OPT_RSS_HASH_S)
u8 q_opt_tc;
-#define ICE_AQ_VSI_Q_OPT_TC_OVR_S 0
-#define ICE_AQ_VSI_Q_OPT_TC_OVR_M (0x1F << ICE_AQ_VSI_Q_OPT_TC_OVR_S)
-#define ICE_AQ_VSI_Q_OPT_PROF_TC_OVR BIT(7)
+#define ICE_AQ_VSI_Q_OPT_TC_OVR_S 0
+#define ICE_AQ_VSI_Q_OPT_TC_OVR_M (0x1F << ICE_AQ_VSI_Q_OPT_TC_OVR_S)
+#define ICE_AQ_VSI_Q_OPT_PROF_TC_OVR BIT(7)
u8 q_opt_flags;
-#define ICE_AQ_VSI_Q_OPT_PE_FLTR_EN BIT(0)
+#define ICE_AQ_VSI_Q_OPT_PE_FLTR_EN BIT(0)
u8 q_opt_reserved[3];
/* outer up section */
__le32 outer_up_table; /* same structure and defines as ingress tbl */
/* ACL section */
__le16 acl_def_act;
-#define ICE_AQ_VSI_ACL_DEF_RX_PROF_S 0
-#define ICE_AQ_VSI_ACL_DEF_RX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_PROF_S)
-#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_S 4
-#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_TABLE_S)
-#define ICE_AQ_VSI_ACL_DEF_TX_PROF_S 8
-#define ICE_AQ_VSI_ACL_DEF_TX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_PROF_S)
-#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_S 12
-#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_TABLE_S)
+#define ICE_AQ_VSI_ACL_DEF_RX_PROF_S 0
+#define ICE_AQ_VSI_ACL_DEF_RX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_PROF_S)
+#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_S 4
+#define ICE_AQ_VSI_ACL_DEF_RX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_RX_TABLE_S)
+#define ICE_AQ_VSI_ACL_DEF_TX_PROF_S 8
+#define ICE_AQ_VSI_ACL_DEF_TX_PROF_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_PROF_S)
+#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_S 12
+#define ICE_AQ_VSI_ACL_DEF_TX_TABLE_M (0xF << ICE_AQ_VSI_ACL_DEF_TX_TABLE_S)
/* flow director section */
__le16 fd_options;
-#define ICE_AQ_VSI_FD_ENABLE BIT(0)
-#define ICE_AQ_VSI_FD_TX_AUTO_ENABLE BIT(1)
-#define ICE_AQ_VSI_FD_PROG_ENABLE BIT(3)
+#define ICE_AQ_VSI_FD_ENABLE BIT(0)
+#define ICE_AQ_VSI_FD_TX_AUTO_ENABLE BIT(1)
+#define ICE_AQ_VSI_FD_PROG_ENABLE BIT(3)
__le16 max_fd_fltr_dedicated;
__le16 max_fd_fltr_shared;
__le16 fd_def_q;
-#define ICE_AQ_VSI_FD_DEF_Q_S 0
-#define ICE_AQ_VSI_FD_DEF_Q_M (0x7FF << ICE_AQ_VSI_FD_DEF_Q_S)
-#define ICE_AQ_VSI_FD_DEF_GRP_S 12
-#define ICE_AQ_VSI_FD_DEF_GRP_M (0x7 << ICE_AQ_VSI_FD_DEF_GRP_S)
+#define ICE_AQ_VSI_FD_DEF_Q_S 0
+#define ICE_AQ_VSI_FD_DEF_Q_M (0x7FF << ICE_AQ_VSI_FD_DEF_Q_S)
+#define ICE_AQ_VSI_FD_DEF_GRP_S 12
+#define ICE_AQ_VSI_FD_DEF_GRP_M (0x7 << ICE_AQ_VSI_FD_DEF_GRP_S)
__le16 fd_report_opt;
-#define ICE_AQ_VSI_FD_REPORT_Q_S 0
-#define ICE_AQ_VSI_FD_REPORT_Q_M (0x7FF << ICE_AQ_VSI_FD_REPORT_Q_S)
-#define ICE_AQ_VSI_FD_DEF_PRIORITY_S 12
-#define ICE_AQ_VSI_FD_DEF_PRIORITY_M (0x7 << ICE_AQ_VSI_FD_DEF_PRIORITY_S)
-#define ICE_AQ_VSI_FD_DEF_DROP BIT(15)
+#define ICE_AQ_VSI_FD_REPORT_Q_S 0
+#define ICE_AQ_VSI_FD_REPORT_Q_M (0x7FF << ICE_AQ_VSI_FD_REPORT_Q_S)
+#define ICE_AQ_VSI_FD_DEF_PRIORITY_S 12
+#define ICE_AQ_VSI_FD_DEF_PRIORITY_M (0x7 << ICE_AQ_VSI_FD_DEF_PRIORITY_S)
+#define ICE_AQ_VSI_FD_DEF_DROP BIT(15)
/* PASID section */
__le32 pasid_id;
-#define ICE_AQ_VSI_PASID_ID_S 0
-#define ICE_AQ_VSI_PASID_ID_M (0xFFFFF << ICE_AQ_VSI_PASID_ID_S)
-#define ICE_AQ_VSI_PASID_ID_VALID BIT(31)
+#define ICE_AQ_VSI_PASID_ID_S 0
+#define ICE_AQ_VSI_PASID_ID_M (0xFFFFF << ICE_AQ_VSI_PASID_ID_S)
+#define ICE_AQ_VSI_PASID_ID_VALID BIT(31)
u8 reserved[24];
};
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index f30199fc23..7f78cd36cd 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -1131,28 +1131,28 @@ ice_vsi_config_qinq_insertion(struct ice_vsi *vsi, bool on)
if (vsi->info.valid_sections &
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
if (on) {
- if ((vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST) ==
- ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST)
+ if ((vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST) ==
+ ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST)
return 0; /* already on */
} else {
- if (!(vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST))
+ if (!(vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST))
return 0; /* already off */
}
}
if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST;
+ qinq_flags = ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST;
else
qinq_flags = 0;
/* clear global insertion and use per packet insertion */
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_INSERT);
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_ACCEPT_HOST);
- vsi->info.outer_tag_flags |= qinq_flags;
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT);
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST);
+ vsi->info.outer_vlan_flags |= qinq_flags;
/* use default vlan type 0x8100 */
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_tag_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
+ vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
ICE_AQ_VSI_OUTER_TAG_TYPE_S;
(void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
@@ -1184,27 +1184,27 @@ ice_vsi_config_qinq_stripping(struct ice_vsi *vsi, bool on)
if (vsi->info.valid_sections &
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
if (on) {
- if ((vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_MODE_M) ==
- ICE_AQ_VSI_OUTER_TAG_COPY)
+ if ((vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW)
return 0; /* already on */
} else {
- if ((vsi->info.outer_tag_flags &
- ICE_AQ_VSI_OUTER_TAG_MODE_M) ==
- ICE_AQ_VSI_OUTER_TAG_NOTHING)
+ if ((vsi->info.outer_vlan_flags &
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH)
return 0; /* already off */
}
}
if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_TAG_COPY;
+ qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW;
else
- qinq_flags = ICE_AQ_VSI_OUTER_TAG_NOTHING;
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_MODE_M);
- vsi->info.outer_tag_flags |= qinq_flags;
+ qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH;
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_EMODE_M);
+ vsi->info.outer_vlan_flags |= qinq_flags;
/* use default vlan type 0x8100 */
- vsi->info.outer_tag_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_tag_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
+ vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
+ vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
ICE_AQ_VSI_OUTER_TAG_TYPE_S;
(void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
@@ -1582,8 +1582,8 @@ ice_setup_vsi(struct ice_pf *pf, enum ice_vsi_type type)
vsi_ctx.info.sw_id = hw->port_info->sw_id;
vsi_ctx.info.sw_flags2 = ICE_AQ_VSI_SW_FLAG_LAN_ENA;
/* Allow all untagged or tagged packets */
- vsi_ctx.info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_ALL;
- vsi_ctx.info.vlan_flags |= ICE_AQ_VSI_VLAN_EMOD_NOTHING;
+ vsi_ctx.info.inner_vlan_flags = ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
+ vsi_ctx.info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
vsi_ctx.info.q_opt_rss = ICE_AQ_VSI_Q_OPT_RSS_LUT_PF |
ICE_AQ_VSI_Q_OPT_RSS_TPLZ;
@@ -4101,24 +4101,24 @@ ice_vsi_config_vlan_stripping(struct ice_vsi *vsi, bool on)
if (vsi->info.valid_sections &
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID)) {
if (on) {
- if ((vsi->info.vlan_flags &
- ICE_AQ_VSI_VLAN_EMOD_M) ==
- ICE_AQ_VSI_VLAN_EMOD_STR_BOTH)
+ if ((vsi->info.inner_vlan_flags &
+ ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH)
return 0; /* already on */
} else {
- if ((vsi->info.vlan_flags &
- ICE_AQ_VSI_VLAN_EMOD_M) ==
- ICE_AQ_VSI_VLAN_EMOD_NOTHING)
+ if ((vsi->info.inner_vlan_flags &
+ ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
+ ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING)
return 0; /* already off */
}
}
if (on)
- vlan_flags = ICE_AQ_VSI_VLAN_EMOD_STR_BOTH;
+ vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
else
- vlan_flags = ICE_AQ_VSI_VLAN_EMOD_NOTHING;
- vsi->info.vlan_flags &= ~(ICE_AQ_VSI_VLAN_EMOD_M);
- vsi->info.vlan_flags |= vlan_flags;
+ vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+ vsi->info.inner_vlan_flags &= ~(ICE_AQ_VSI_INNER_VLAN_EMODE_M);
+ vsi->info.inner_vlan_flags |= vlan_flags;
(void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
@@ -4602,24 +4602,24 @@ ice_vsi_vlan_pvid_set(struct ice_vsi *vsi, struct ice_vsi_vlan_pvid_info *info)
}
if (info->on) {
- vsi->info.pvid = info->config.pvid;
+ vsi->info.port_based_inner_vlan = info->config.pvid;
/**
* If insert pvid is enabled, only tagged pkts are
* allowed to be sent out.
*/
- vlan_flags = ICE_AQ_VSI_PVLAN_INSERT_PVID |
- ICE_AQ_VSI_VLAN_MODE_UNTAGGED;
+ vlan_flags = ICE_AQ_VSI_INNER_VLAN_INSERT_PVID |
+ ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTUNTAGGED;
} else {
- vsi->info.pvid = 0;
+ vsi->info.port_based_inner_vlan = 0;
if (info->config.reject.tagged == 0)
- vlan_flags |= ICE_AQ_VSI_VLAN_MODE_TAGGED;
+ vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTTAGGED;
if (info->config.reject.untagged == 0)
- vlan_flags |= ICE_AQ_VSI_VLAN_MODE_UNTAGGED;
+ vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ACCEPTUNTAGGED;
}
- vsi->info.vlan_flags &= ~(ICE_AQ_VSI_PVLAN_INSERT_PVID |
- ICE_AQ_VSI_VLAN_MODE_M);
- vsi->info.vlan_flags |= vlan_flags;
+ vsi->info.inner_vlan_flags &= ~(ICE_AQ_VSI_INNER_VLAN_INSERT_PVID |
+ ICE_AQ_VSI_INNER_VLAN_EMODE_M);
+ vsi->info.inner_vlan_flags |= vlan_flags;
memset(&ctxt, 0, sizeof(ctxt));
rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
ctxt.info.valid_sections =
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 02/18] net/ice/base: add interface to support configuring VLAN mode
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 03/18] net/ice/base: fix outer VLAN related macro Haiyue Wang
` (16 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 4e4dc21e450b5860da650d255abb6e17c3e637a9 ]
The VLAN mode of the device has to be configured while the global
configuration lock is held while downloading the DDP, specifically after
the DDP has been downloaded. In order to support this a VLAN mode
interface was added. By default the device will stay in single VLAN
mode (SVM), which is the current implementation. However, this can be
changed by implementing the .set_dvm op.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 23 ++++++++++++++
drivers/net/ice/base/ice_common.c | 40 ++++++++++++++++++++++++
drivers/net/ice/base/ice_common.h | 4 +++
drivers/net/ice/base/ice_flex_pipe.c | 7 +++++
drivers/net/ice/base/ice_type.h | 2 ++
drivers/net/ice/base/ice_vlan_mode.c | 44 +++++++++++++++++++++++++++
drivers/net/ice/base/ice_vlan_mode.h | 32 +++++++++++++++++++
drivers/net/ice/base/meson.build | 1 +
8 files changed, 153 insertions(+)
create mode 100644 drivers/net/ice/base/ice_vlan_mode.c
create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index 91d360be62..eebafee7c7 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -227,6 +227,27 @@ struct ice_aqc_get_sw_cfg_resp_elem {
#define ICE_AQC_GET_SW_CONF_RESP_IS_VF BIT(15)
};
+/* Set Port parameters, (direct, 0x0203) */
+struct ice_aqc_set_port_params {
+ __le16 cmd_flags;
+#define ICE_AQC_SET_P_PARAMS_SAVE_BAD_PACKETS BIT(0)
+#define ICE_AQC_SET_P_PARAMS_PAD_SHORT_PACKETS BIT(1)
+#define ICE_AQC_SET_P_PARAMS_DOUBLE_VLAN_ENA BIT(2)
+ __le16 bad_frame_vsi;
+#define ICE_AQC_SET_P_PARAMS_VSI_S 0
+#define ICE_AQC_SET_P_PARAMS_VSI_M (0x3FF << ICE_AQC_SET_P_PARAMS_VSI_S)
+#define ICE_AQC_SET_P_PARAMS_VSI_VALID BIT(15)
+ __le16 swid;
+#define ICE_AQC_SET_P_PARAMS_SWID_S 0
+#define ICE_AQC_SET_P_PARAMS_SWID_M (0xFF << ICE_AQC_SET_P_PARAMS_SWID_S)
+#define ICE_AQC_SET_P_PARAMS_LOGI_PORT_ID_S 8
+#define ICE_AQC_SET_P_PARAMS_LOGI_PORT_ID_M \
+ (0x3F << ICE_AQC_SET_P_PARAMS_LOGI_PORT_ID_S)
+#define ICE_AQC_SET_P_PARAMS_IS_LOGI_PORT BIT(14)
+#define ICE_AQC_SET_P_PARAMS_SWID_VALID BIT(15)
+ u8 reserved[10];
+};
+
/* These resource type defines are used for all switch resource
* commands where a resource type is required, such as:
* Get Resource Allocation command (indirect 0x0204)
@@ -2713,6 +2734,7 @@ struct ice_aq_desc {
struct ice_aqc_sff_eeprom read_write_sff_param;
struct ice_aqc_set_port_id_led set_port_id_led;
struct ice_aqc_get_sw_cfg get_sw_conf;
+ struct ice_aqc_set_port_params set_port_params;
struct ice_aqc_sw_rules sw_rules;
struct ice_aqc_storm_cfg storm_conf;
struct ice_aqc_add_get_recipe add_get_recipe;
@@ -2876,6 +2898,7 @@ enum ice_adminq_opc {
/* internal switch commands */
ice_aqc_opc_get_sw_cfg = 0x0200,
+ ice_aqc_opc_set_port_params = 0x0203,
/* Alloc/Free/Get Resources */
ice_aqc_opc_get_res_alloc = 0x0204,
diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c
index 304e55e210..b5f1d8cce5 100644
--- a/drivers/net/ice/base/ice_common.c
+++ b/drivers/net/ice/base/ice_common.c
@@ -830,6 +830,9 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
if (status)
goto err_unroll_fltr_mgmt_struct;
ice_init_lock(&hw->tnl_lock);
+
+ ice_init_vlan_mode_ops(hw);
+
return ICE_SUCCESS;
err_unroll_fltr_mgmt_struct:
@@ -2370,6 +2373,43 @@ void ice_clear_pxe_mode(struct ice_hw *hw)
ice_aq_clear_pxe_mode(hw);
}
+/**
+ * ice_aq_set_port_params - set physical port parameters.
+ * @pi: pointer to the port info struct
+ * @bad_frame_vsi: defines the VSI to which bad frames are forwarded
+ * @save_bad_pac: if set packets with errors are forwarded to the bad frames VSI
+ * @pad_short_pac: if set transmit packets smaller than 60 bytes are padded
+ * @double_vlan: if set double VLAN is enabled
+ * @cd: pointer to command details structure or NULL
+ *
+ * Set Physical port parameters (0x0203)
+ */
+enum ice_status
+ice_aq_set_port_params(struct ice_port_info *pi, u16 bad_frame_vsi,
+ bool save_bad_pac, bool pad_short_pac, bool double_vlan,
+ struct ice_sq_cd *cd)
+
+{
+ struct ice_aqc_set_port_params *cmd;
+ struct ice_hw *hw = pi->hw;
+ struct ice_aq_desc desc;
+ u16 cmd_flags = 0;
+
+ cmd = &desc.params.set_port_params;
+
+ ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_set_port_params);
+ cmd->bad_frame_vsi = CPU_TO_LE16(bad_frame_vsi);
+ if (save_bad_pac)
+ cmd_flags |= ICE_AQC_SET_P_PARAMS_SAVE_BAD_PACKETS;
+ if (pad_short_pac)
+ cmd_flags |= ICE_AQC_SET_P_PARAMS_PAD_SHORT_PACKETS;
+ if (double_vlan)
+ cmd_flags |= ICE_AQC_SET_P_PARAMS_DOUBLE_VLAN_ENA;
+ cmd->cmd_flags = CPU_TO_LE16(cmd_flags);
+
+ return ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
+}
+
/**
* ice_get_link_speed_based_on_phy_type - returns link speed
* @phy_type_low: lower part of phy_type
diff --git a/drivers/net/ice/base/ice_common.h b/drivers/net/ice/base/ice_common.h
index 8c16c7a024..765dc3054f 100644
--- a/drivers/net/ice/base/ice_common.h
+++ b/drivers/net/ice/base/ice_common.h
@@ -123,6 +123,10 @@ enum ice_status
ice_aq_send_driver_ver(struct ice_hw *hw, struct ice_driver_ver *dv,
struct ice_sq_cd *cd);
enum ice_status
+ice_aq_set_port_params(struct ice_port_info *pi, u16 bad_frame_vsi,
+ bool save_bad_pac, bool pad_short_pac, bool double_vlan,
+ struct ice_sq_cd *cd);
+enum ice_status
ice_aq_get_phy_caps(struct ice_port_info *pi, bool qual_mods, u8 report_mode,
struct ice_aqc_get_phy_caps_data *caps,
struct ice_sq_cd *cd);
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index d74fecbf5b..6c7f83899d 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1006,6 +1006,13 @@ ice_dwnld_cfg_bufs(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
break;
}
+ if (!status) {
+ status = ice_set_vlan_mode(hw);
+ if (status)
+ ice_debug(hw, ICE_DBG_PKG, "Failed to set VLAN mode: err %d\n",
+ status);
+ }
+
ice_release_global_cfg_lock(hw);
return status;
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index 6b8d44f0b4..996b58b743 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -57,6 +57,7 @@
#include "ice_lan_tx_rx.h"
#include "ice_flex_type.h"
#include "ice_protocol_type.h"
+#include "ice_vlan_mode.h"
/**
* ice_is_pow2 - check if integer value is a power of 2
@@ -985,6 +986,7 @@ struct ice_hw {
ice_declare_bitmap(fdir_perfect_fltr, ICE_FLTR_PTYPE_MAX);
struct ice_lock rss_locks; /* protect RSS configuration */
struct LIST_HEAD_TYPE rss_list_head;
+ struct ice_vlan_mode_ops vlan_mode_ops;
};
/* Statistics collected by each port, VSI, VEB, and S-channel */
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
new file mode 100644
index 0000000000..603de74e25
--- /dev/null
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
+
+#include "ice_vlan_mode.h"
+#include "ice_common.h"
+
+/**
+ * ice_set_svm - set single VLAN mode
+ * @hw: pointer to the HW structure
+ */
+static enum ice_status ice_set_svm_dflt(struct ice_hw *hw)
+{
+ ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
+
+ return ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+}
+
+/**
+ * ice_init_vlan_mode_ops - initialize VLAN mode configuration ops
+ * @hw: pointer to the HW structure
+ */
+void ice_init_vlan_mode_ops(struct ice_hw *hw)
+{
+ hw->vlan_mode_ops.set_dvm = NULL;
+ hw->vlan_mode_ops.set_svm = ice_set_svm_dflt;
+}
+
+/**
+ * ice_set_vlan_mode
+ * @hw: pointer to the HW structure
+ */
+enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
+{
+ enum ice_status status = ICE_ERR_NOT_IMPL;
+
+ if (hw->vlan_mode_ops.set_dvm)
+ status = hw->vlan_mode_ops.set_dvm(hw);
+
+ if (status)
+ return hw->vlan_mode_ops.set_svm(hw);
+
+ return ICE_SUCCESS;
+}
diff --git a/drivers/net/ice/base/ice_vlan_mode.h b/drivers/net/ice/base/ice_vlan_mode.h
new file mode 100644
index 0000000000..1b9db4d36f
--- /dev/null
+++ b/drivers/net/ice/base/ice_vlan_mode.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2020 Intel Corporation
+ */
+
+#ifndef _ICE_VLAN_MODE_H_
+#define _ICE_VLAN_MODE_H_
+
+struct ice_hw;
+
+enum ice_status ice_set_vlan_mode(struct ice_hw *hw);
+void ice_init_vlan_mode_ops(struct ice_hw *hw);
+
+/* This structure defines the VLAN mode configuration interface. It is used to set the VLAN mode.
+ *
+ * Note: These operations will be called while the global configuration lock is held.
+ *
+ * enum ice_status (*set_svm)(struct ice_hw *hw);
+ * This function is called when the DDP and/or Firmware don't support double VLAN mode (DVM) or
+ * if the set_dvm op is not implemented and/or returns failure. It will set the device in
+ * single VLAN mode (SVM).
+ *
+ * enum ice_status (*set_dvm)(struct ice_hw *hw);
+ * This function is called when the DDP and Firmware support double VLAN mode (DVM). It should
+ * be implemented to set double VLAN mode. If it fails or remains unimplemented, set_svm will
+ * be called as a fallback plan.
+ */
+struct ice_vlan_mode_ops {
+ enum ice_status (*set_svm)(struct ice_hw *hw);
+ enum ice_status (*set_dvm)(struct ice_hw *hw);
+};
+
+#endif /* _ICE_VLAN_MODE_H */
diff --git a/drivers/net/ice/base/meson.build b/drivers/net/ice/base/meson.build
index 22963ce31d..ad5e5da25b 100644
--- a/drivers/net/ice/base/meson.build
+++ b/drivers/net/ice/base/meson.build
@@ -13,6 +13,7 @@ sources = [
'ice_fdir.c',
'ice_acl.c',
'ice_acl_ctrl.c',
+ 'ice_vlan_mode.c',
]
error_cflags = ['-Wno-unused-value',
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 03/18] net/ice/base: fix outer VLAN related macro
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 02/18] net/ice/base: add interface to support configuring VLAN mode Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 04/18] net/ice/base: add VLAN TPID for VLAN filters Haiyue Wang
` (15 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 25aa214490814d14e5f8f69121c23c0b91d2aeb9 ]
Fix the wrong value of ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST
Fixes: 9ea028123a0b ("net/ice/base: align add VSI and update VSI AQ command buffer")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index eebafee7c7..c0617093d4 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -500,7 +500,7 @@ struct ice_aqc_vsi_props {
#define ICE_AQ_VSI_OUTER_TAG_VLAN_8100 0x2
#define ICE_AQ_VSI_OUTER_TAG_VLAN_9100 0x3
#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT BIT(4)
-#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST BIT(4)
+#define ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST BIT(6)
#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S 5
#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_M (0x3 << ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S)
#define ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ACCEPTUNTAGGED 0x1
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 04/18] net/ice/base: add VLAN TPID for VLAN filters
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (2 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 03/18] net/ice/base: fix outer VLAN related macro Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 05/18] net/ice/base: support checking double VLAN mode Haiyue Wang
` (14 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit a6b975d23c10756083357355372c4f545ddc1ebe ]
Currently VLAN filters via RID4 are only based on VLAN ID. However, with
incoming support for Double VLAN Mode (DVM), the driver needs to be able
to support filtering on VLAN ID + VLAN TPID (i.e. 0x8100, 0x88a8, etc.).
Add support for this by adding two fields to the ice_fltr_info
structure. First, add the tpid_valid field so the code can determine
whether or not to overwrite the default 0x8100 value for programming
packets or use the tpid field.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_switch.c | 6 ++++++
drivers/net/ice/base/ice_switch.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index e6ea04183f..8d455f5995 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -14,6 +14,7 @@
#define ICE_PPP_IPV6_PROTO_ID 0x0057
#define ICE_IPV6_ETHER_ID 0x86DD
#define ICE_TCP_PROTO_ID 0x06
+#define ICE_ETH_P_8021Q 0x8100
/* Dummy ethernet header needed in the ice_aqc_sw_rules_elem
* struct to configure any switch filter rules.
@@ -3034,6 +3035,7 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
struct ice_aqc_sw_rules_elem *s_rule, enum ice_adminq_opc opc)
{
u16 vlan_id = ICE_MAX_VLAN_ID + 1;
+ u16 vlan_tpid = ICE_ETH_P_8021Q;
void *daddr = NULL;
u16 eth_hdr_sz;
u8 *eth_hdr;
@@ -3106,6 +3108,8 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
break;
case ICE_SW_LKUP_VLAN:
vlan_id = f_info->l_data.vlan.vlan_id;
+ if (f_info->l_data.vlan.tpid_valid)
+ vlan_tpid = f_info->l_data.vlan.tpid;
if (f_info->fltr_act == ICE_FWD_TO_VSI ||
f_info->fltr_act == ICE_FWD_TO_VSI_LIST) {
act |= ICE_SINGLE_ACT_PRUNE;
@@ -3149,6 +3153,8 @@ ice_fill_sw_rule(struct ice_hw *hw, struct ice_fltr_info *f_info,
if (!(vlan_id > ICE_MAX_VLAN_ID)) {
off = (_FORCE_ __be16 *)(eth_hdr + ICE_ETH_VLAN_TCI_OFFSET);
*off = CPU_TO_BE16(vlan_id);
+ off = (_FORCE_ __be16 *)(eth_hdr + ICE_ETH_ETHTYPE_OFFSET);
+ *off = CPU_TO_BE16(vlan_tpid);
}
/* Create the switch rule with the final dummy Ethernet header */
diff --git a/drivers/net/ice/base/ice_switch.h b/drivers/net/ice/base/ice_switch.h
index be9b74fd4c..392eb369c7 100644
--- a/drivers/net/ice/base/ice_switch.h
+++ b/drivers/net/ice/base/ice_switch.h
@@ -160,6 +160,8 @@ struct ice_fltr_info {
} mac_vlan;
struct {
u16 vlan_id;
+ u16 tpid;
+ u8 tpid_valid;
} vlan;
/* Set lkup_type as ICE_SW_LKUP_ETHERTYPE
* if just using ethertype as filter. Set lkup_type as
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 05/18] net/ice/base: support checking double VLAN mode
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (3 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 04/18] net/ice/base: add VLAN TPID for VLAN filters Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 06/18] net/ice/base: support configuring device in " Haiyue Wang
` (13 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Jacob Keller, Dan Nowlin, Brett Creeley,
Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 67285599c9f413c59118379d1f7162031ea6acdc ]
If a driver wants to configure double VLAN mode (DVM) it needs to
first check if the DDP supports DVM. To do this the driver needs to read
the package metadata section via the upload section AQ (0x04C1).
If the DDP doesn't support configuring double VLAN mode (DVM), then
there is nothing to do regarding configuring the VLAN mode of the
device.
The set_svm() or set_dvm() ops should only be called if the current
configuration supports configuring the VLAN mode of the device.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_bitops.h | 45 ++++++++++++++++
drivers/net/ice/base/ice_flex_pipe.c | 63 +++++++++++++++++++++-
drivers/net/ice/base/ice_flex_pipe.h | 11 ++++
drivers/net/ice/base/ice_flex_type.h | 26 ++++++++++
drivers/net/ice/base/ice_vlan_mode.c | 78 ++++++++++++++++++++++++++++
5 files changed, 221 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ice/base/ice_bitops.h b/drivers/net/ice/base/ice_bitops.h
index 39548967cc..b786bf7a18 100644
--- a/drivers/net/ice/base/ice_bitops.h
+++ b/drivers/net/ice/base/ice_bitops.h
@@ -449,4 +449,49 @@ ice_cmp_bitmap(ice_bitmap_t *bmp1, ice_bitmap_t *bmp2, u16 size)
return true;
}
+/**
+ * ice_bitmap_from_array32 - copies u32 array source into bitmap destination
+ * @dst: the destination bitmap
+ * @src: the source u32 array
+ * @size: size of the bitmap (in bits)
+ *
+ * This function copies the src bitmap stored in an u32 array into the dst
+ * bitmap stored as an ice_bitmap_t.
+ */
+static inline void
+ice_bitmap_from_array32(ice_bitmap_t *dst, u32 *src, u16 size)
+{
+ u32 remaining_bits, i;
+
+#define BITS_PER_U32 (sizeof(u32) * BITS_PER_BYTE)
+ /* clear bitmap so we only have to set when iterating */
+ ice_zero_bitmap(dst, size);
+
+ for (i = 0; i < (u32)(size / BITS_PER_U32); i++) {
+ u32 bit_offset = i * BITS_PER_U32;
+ u32 entry = src[i];
+ u32 j;
+
+ for (j = 0; j < BITS_PER_U32; j++) {
+ if (entry & BIT(j))
+ ice_set_bit((u16)(j + bit_offset), dst);
+ }
+ }
+
+ /* still need to check the leftover bits (i.e. if size isn't evenly
+ * divisible by BITS_PER_U32
+ **/
+ remaining_bits = size % BITS_PER_U32;
+ if (remaining_bits) {
+ u32 bit_offset = i * BITS_PER_U32;
+ u32 entry = src[i];
+ u32 j;
+
+ for (j = 0; j < remaining_bits; j++) {
+ if (entry & BIT(j))
+ ice_set_bit((u16)(j + bit_offset), dst);
+ }
+ }
+}
+
#endif /* _ICE_BITOPS_H_ */
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index 6c7f83899d..e511b50a00 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -807,6 +807,28 @@ ice_aq_download_pkg(struct ice_hw *hw, struct ice_buf_hdr *pkg_buf,
return status;
}
+/**
+ * ice_aq_upload_section
+ * @hw: pointer to the hardware structure
+ * @pkg_buf: the package buffer which will receive the section
+ * @buf_size: the size of the package buffer
+ * @cd: pointer to command details structure or NULL
+ *
+ * Upload Section (0x0C41)
+ */
+enum ice_status
+ice_aq_upload_section(struct ice_hw *hw, struct ice_buf_hdr *pkg_buf,
+ u16 buf_size, struct ice_sq_cd *cd)
+{
+ struct ice_aq_desc desc;
+
+ ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
+ ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_upload_section);
+ desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD);
+
+ return ice_aq_send_cmd(hw, &desc, pkg_buf, buf_size, cd);
+}
+
/**
* ice_aq_update_pkg
* @hw: pointer to the hardware structure
@@ -1800,7 +1822,7 @@ void ice_init_prof_result_bm(struct ice_hw *hw)
*
* Frees a package buffer
*/
-static void ice_pkg_buf_free(struct ice_hw *hw, struct ice_buf_build *bld)
+void ice_pkg_buf_free(struct ice_hw *hw, struct ice_buf_build *bld)
{
ice_free(hw, bld);
}
@@ -1899,6 +1921,43 @@ ice_pkg_buf_alloc_section(struct ice_buf_build *bld, u32 type, u16 size)
return NULL;
}
+/**
+ * ice_pkg_buf_alloc_single_section
+ * @hw: pointer to the HW structure
+ * @type: the section type value
+ * @size: the size of the section to reserve (in bytes)
+ * @section: returns pointer to the section
+ *
+ * Allocates a package buffer with a single section.
+ * Note: all package contents must be in Little Endian form.
+ */
+struct ice_buf_build *
+ice_pkg_buf_alloc_single_section(struct ice_hw *hw, u32 type, u16 size,
+ void **section)
+{
+ struct ice_buf_build *buf;
+
+ if (!section)
+ return NULL;
+
+ buf = ice_pkg_buf_alloc(hw);
+ if (!buf)
+ return NULL;
+
+ if (ice_pkg_buf_reserve_section(buf, 1))
+ goto ice_pkg_buf_alloc_single_section_err;
+
+ *section = ice_pkg_buf_alloc_section(buf, type, size);
+ if (!*section)
+ goto ice_pkg_buf_alloc_single_section_err;
+
+ return buf;
+
+ice_pkg_buf_alloc_single_section_err:
+ ice_pkg_buf_free(hw, buf);
+ return NULL;
+}
+
/**
* ice_pkg_buf_get_active_sections
* @bld: pointer to pkg build (allocated by ice_pkg_buf_alloc())
@@ -1926,7 +1985,7 @@ static u16 ice_pkg_buf_get_active_sections(struct ice_buf_build *bld)
*
* Return a pointer to the buffer's header
*/
-static struct ice_buf *ice_pkg_buf(struct ice_buf_build *bld)
+struct ice_buf *ice_pkg_buf(struct ice_buf_build *bld)
{
if (!bld)
return NULL;
diff --git a/drivers/net/ice/base/ice_flex_pipe.h b/drivers/net/ice/base/ice_flex_pipe.h
index 214c7a2837..d4679cc940 100644
--- a/drivers/net/ice/base/ice_flex_pipe.h
+++ b/drivers/net/ice/base/ice_flex_pipe.h
@@ -38,6 +38,12 @@ ice_init_prof_result_bm(struct ice_hw *hw);
enum ice_status
ice_get_sw_fv_list(struct ice_hw *hw, u8 *prot_ids, u16 ids_cnt,
ice_bitmap_t *bm, struct LIST_HEAD_TYPE *fv_list);
+enum ice_status
+ice_pkg_buf_unreserve_section(struct ice_buf_build *bld, u16 count);
+u16 ice_pkg_buf_get_free_space(struct ice_buf_build *bld);
+enum ice_status
+ice_aq_upload_section(struct ice_hw *hw, struct ice_buf_hdr *pkg_buf,
+ u16 buf_size, struct ice_sq_cd *cd);
bool
ice_get_open_tunnel_port(struct ice_hw *hw, enum ice_tunnel_type type,
u16 *port);
@@ -75,6 +81,11 @@ void ice_clear_hw_tbls(struct ice_hw *hw);
void ice_free_hw_tbls(struct ice_hw *hw);
enum ice_status
ice_rem_prof(struct ice_hw *hw, enum ice_block blk, u64 id);
+struct ice_buf_build *
+ice_pkg_buf_alloc_single_section(struct ice_hw *hw, u32 type, u16 size,
+ void **section);
+struct ice_buf *ice_pkg_buf(struct ice_buf_build *bld);
+void ice_pkg_buf_free(struct ice_hw *hw, struct ice_buf_build *bld);
enum ice_status
ice_set_key(u8 *key, u16 size, u8 *val, u8 *upd, u8 *dc, u8 *nm, u16 off,
diff --git a/drivers/net/ice/base/ice_flex_type.h b/drivers/net/ice/base/ice_flex_type.h
index 1dd57baccd..169476369b 100644
--- a/drivers/net/ice/base/ice_flex_type.h
+++ b/drivers/net/ice/base/ice_flex_type.h
@@ -786,4 +786,30 @@ enum ice_prof_type {
ICE_PROF_TUN_ALL = 0xE,
ICE_PROF_ALL = 0xFF,
};
+
+/* Number of bits/bytes contained in meta init entry. Note, this should be a
+ * multiple of 32 bits.
+ */
+#define ICE_META_INIT_BITS 192
+#define ICE_META_INIT_DW_CNT (ICE_META_INIT_BITS / (sizeof(__le32) * \
+ BITS_PER_BYTE))
+
+/* The meta init Flag field starts at this bit */
+#define ICE_META_FLAGS_ST 123
+
+/* The entry and bit to check for Double VLAN Mode (DVM) support */
+#define ICE_META_VLAN_MODE_ENTRY 0
+#define ICE_META_FLAG_VLAN_MODE 60
+#define ICE_META_VLAN_MODE_BIT (ICE_META_FLAGS_ST + \
+ ICE_META_FLAG_VLAN_MODE)
+
+struct ice_meta_init_entry {
+ __le32 bm[ICE_META_INIT_DW_CNT];
+};
+
+struct ice_meta_init_section {
+ __le16 count;
+ __le16 offset;
+ struct ice_meta_init_entry entry[1];
+};
#endif /* _ICE_FLEX_TYPE_H_ */
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 603de74e25..c4e7a40295 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -5,6 +5,81 @@
#include "ice_vlan_mode.h"
#include "ice_common.h"
+/**
+ * ice_pkg_get_supported_vlan_mode - chk if DDP supports Double VLAN mode (DVM)
+ * @hw: pointer to the HW struct
+ * @dvm: output variable to determine if DDP supports DVM(true) or SVM(false)
+ */
+static enum ice_status
+ice_pkg_get_supported_vlan_mode(struct ice_hw *hw, bool *dvm)
+{
+ u16 meta_init_size = sizeof(struct ice_meta_init_section);
+ struct ice_meta_init_section *sect;
+ struct ice_buf_build *bld;
+ enum ice_status status;
+
+ /* if anything fails, we assume there is no DVM support */
+ *dvm = false;
+
+ bld = ice_pkg_buf_alloc_single_section(hw,
+ ICE_SID_RXPARSER_METADATA_INIT,
+ meta_init_size, (void **)§);
+ if (!bld)
+ return ICE_ERR_NO_MEMORY;
+
+ /* only need to read a single section */
+ sect->count = CPU_TO_LE16(1);
+ sect->offset = CPU_TO_LE16(ICE_META_VLAN_MODE_ENTRY);
+
+ status = ice_aq_upload_section(hw,
+ (struct ice_buf_hdr *)ice_pkg_buf(bld),
+ ICE_PKG_BUF_SIZE, NULL);
+ if (!status) {
+ ice_declare_bitmap(entry, ICE_META_INIT_BITS);
+ u32 arr[ICE_META_INIT_DW_CNT];
+ u16 i;
+
+ /* convert to host bitmap format */
+ for (i = 0; i < ICE_META_INIT_DW_CNT; i++)
+ arr[i] = LE32_TO_CPU(sect->entry[0].bm[i]);
+
+ ice_bitmap_from_array32(entry, arr, (u16)ICE_META_INIT_BITS);
+
+ /* check if DVM is supported */
+ *dvm = ice_is_bit_set(entry, ICE_META_VLAN_MODE_BIT);
+ }
+
+ ice_pkg_buf_free(hw, bld);
+
+ return status;
+}
+
+/**
+ * ice_is_dvm_supported - check if double VLAN mode is supported based on DDP
+ * @hw: pointer to the hardware structure
+ *
+ * Returns true if DVM is supported and false if only SVM is supported. This
+ * function should only be called while the global config lock is held and after
+ * the package has been successfully downloaded.
+ */
+static bool ice_is_dvm_supported(struct ice_hw *hw)
+{
+ enum ice_status status;
+ bool pkg_supports_dvm;
+
+ status = ice_pkg_get_supported_vlan_mode(hw, &pkg_supports_dvm);
+ if (status) {
+ ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, err %d\n",
+ status);
+ return false;
+ }
+
+ if (!pkg_supports_dvm)
+ return false;
+
+ return true;
+}
+
/**
* ice_set_svm - set single VLAN mode
* @hw: pointer to the HW structure
@@ -34,6 +109,9 @@ enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
{
enum ice_status status = ICE_ERR_NOT_IMPL;
+ if (!ice_is_dvm_supported(hw))
+ return ICE_SUCCESS;
+
if (hw->vlan_mode_ops.set_dvm)
status = hw->vlan_mode_ops.set_dvm(hw);
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 06/18] net/ice/base: support configuring device in double VLAN mode
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (4 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 05/18] net/ice/base: support checking double VLAN mode Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 07/18] net/ice/base: do not set VLAN mode in DCF mode Haiyue Wang
` (12 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 14e7a4b37b4f2f765b4da08019ffc9098d99a076 ]
In order to support configuring the device in Double VLAN Mode (DVM),
the DDP and FW have to support DVM. If both support DVM, the PF
that downloads the package needs to update the default recipes and set
the VLAN mode. This is done in ice_set_dvm().
In order to support updating the default recipes in DVM add support
for updating an existing switch recipe's lkup_idx and mask.
This is done by first calling the get recipe AQ (0x0292) with the
desired recipe ID. Then, if that is successful update one of the lookup
indices (lkup_idx) and its associated mask if the mask is valid
otherwise the already existing mask will be used.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_adminq_cmd.h | 36 ++++
drivers/net/ice/base/ice_common.c | 2 -
drivers/net/ice/base/ice_flex_pipe.c | 9 +-
drivers/net/ice/base/ice_switch.c | 58 ++++++
drivers/net/ice/base/ice_switch.h | 12 ++
drivers/net/ice/base/ice_type.h | 2 +-
drivers/net/ice/base/ice_vlan_mode.c | 284 ++++++++++++++++++++++++--
drivers/net/ice/base/ice_vlan_mode.h | 24 +--
8 files changed, 381 insertions(+), 46 deletions(-)
diff --git a/drivers/net/ice/base/ice_adminq_cmd.h b/drivers/net/ice/base/ice_adminq_cmd.h
index c0617093d4..1bd4f2fc8d 100644
--- a/drivers/net/ice/base/ice_adminq_cmd.h
+++ b/drivers/net/ice/base/ice_adminq_cmd.h
@@ -358,6 +358,40 @@ struct ice_aqc_get_allocd_res_desc {
__le32 addr_low;
};
+/* Request buffer for Set VLAN Mode AQ command (indirect 0x020C) */
+struct ice_aqc_set_vlan_mode {
+ u8 reserved;
+ u8 l2tag_prio_tagging;
+#define ICE_AQ_VLAN_PRIO_TAG_S 0
+#define ICE_AQ_VLAN_PRIO_TAG_M (0x7 << ICE_AQ_VLAN_PRIO_TAG_S)
+#define ICE_AQ_VLAN_PRIO_TAG_NOT_SUPPORTED 0x0
+#define ICE_AQ_VLAN_PRIO_TAG_STAG 0x1
+#define ICE_AQ_VLAN_PRIO_TAG_OUTER_CTAG 0x2
+#define ICE_AQ_VLAN_PRIO_TAG_OUTER_VLAN 0x3
+#define ICE_AQ_VLAN_PRIO_TAG_INNER_CTAG 0x4
+#define ICE_AQ_VLAN_PRIO_TAG_MAX 0x4
+#define ICE_AQ_VLAN_PRIO_TAG_ERROR 0x7
+ u8 l2tag_reserved[64];
+ u8 rdma_packet;
+#define ICE_AQ_VLAN_RDMA_TAG_S 0
+#define ICE_AQ_VLAN_RDMA_TAG_M (0x3F << ICE_AQ_VLAN_RDMA_TAG_S)
+#define ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING 0x10
+#define ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING 0x1A
+ u8 rdma_reserved[2];
+ u8 mng_vlan_prot_id;
+#define ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER 0x10
+#define ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER 0x11
+ u8 prot_id_reserved[30];
+};
+
+/* Response buffer for Get VLAN Mode AQ command (indirect 0x020D) */
+struct ice_aqc_get_vlan_mode {
+ u8 vlan_mode;
+#define ICE_AQ_VLAN_MODE_DVM_ENA BIT(0)
+ u8 l2tag_prio_tagging;
+ u8 reserved[98];
+};
+
/* Add VSI (indirect 0x0210)
* Update VSI (indirect 0x0211)
* Get VSI (indirect 0x0212)
@@ -2905,6 +2939,8 @@ enum ice_adminq_opc {
ice_aqc_opc_alloc_res = 0x0208,
ice_aqc_opc_free_res = 0x0209,
ice_aqc_opc_get_allocd_res_desc = 0x020A,
+ ice_aqc_opc_set_vlan_mode_parameters = 0x020C,
+ ice_aqc_opc_get_vlan_mode_parameters = 0x020D,
/* VSI commands */
ice_aqc_opc_add_vsi = 0x0210,
diff --git a/drivers/net/ice/base/ice_common.c b/drivers/net/ice/base/ice_common.c
index b5f1d8cce5..0f120ec6e0 100644
--- a/drivers/net/ice/base/ice_common.c
+++ b/drivers/net/ice/base/ice_common.c
@@ -831,8 +831,6 @@ enum ice_status ice_init_hw(struct ice_hw *hw)
goto err_unroll_fltr_mgmt_struct;
ice_init_lock(&hw->tnl_lock);
- ice_init_vlan_mode_ops(hw);
-
return ICE_SUCCESS;
err_unroll_fltr_mgmt_struct:
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index e511b50a00..cced7b6352 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1073,6 +1073,7 @@ static enum ice_status
ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
{
struct ice_buf_table *ice_buf_tbl;
+ enum ice_status status;
ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
ice_debug(hw, ICE_DBG_PKG, "Segment format version: %d.%d.%d.%d\n",
@@ -1090,8 +1091,12 @@ ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
ice_debug(hw, ICE_DBG_PKG, "Seg buf count: %d\n",
LE32_TO_CPU(ice_buf_tbl->buf_count));
- return ice_dwnld_cfg_bufs(hw, ice_buf_tbl->buf_array,
- LE32_TO_CPU(ice_buf_tbl->buf_count));
+ status = ice_dwnld_cfg_bufs(hw, ice_buf_tbl->buf_array,
+ LE32_TO_CPU(ice_buf_tbl->buf_count));
+
+ ice_cache_vlan_mode(hw);
+
+ return status;
}
/**
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 8d455f5995..df8319a7e7 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -2768,6 +2768,64 @@ ice_aq_get_recipe(struct ice_hw *hw,
return status;
}
+/**
+ * ice_update_recipe_lkup_idx - update a default recipe based on the lkup_idx
+ * @hw: pointer to the HW struct
+ * @params: parameters used to update the default recipe
+ *
+ * This function only supports updating default recipes and it only supports
+ * updating a single recipe based on the lkup_idx at a time.
+ *
+ * This is done as a read-modify-write operation. First, get the current recipe
+ * contents based on the recipe's ID. Then modify the field vector index and
+ * mask if it's valid at the lkup_idx. Finally, use the add recipe AQ to update
+ * the pre-existing recipe with the modifications.
+ */
+enum ice_status
+ice_update_recipe_lkup_idx(struct ice_hw *hw,
+ struct ice_update_recipe_lkup_idx_params *params)
+{
+ struct ice_aqc_recipe_data_elem *rcp_list;
+ u16 num_recps = ICE_MAX_NUM_RECIPES;
+ enum ice_status status;
+
+ rcp_list = (struct ice_aqc_recipe_data_elem *)ice_malloc(hw, num_recps * sizeof(*rcp_list));
+ if (!rcp_list)
+ return ICE_ERR_NO_MEMORY;
+
+ /* read current recipe list from firmware */
+ rcp_list->recipe_indx = params->rid;
+ status = ice_aq_get_recipe(hw, rcp_list, &num_recps, params->rid, NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_SW, "Failed to get recipe %d, status %d\n",
+ params->rid, status);
+ goto error_out;
+ }
+
+ /* only modify existing recipe's lkup_idx and mask if valid, while
+ * leaving all other fields the same, then update the recipe firmware
+ */
+ rcp_list->content.lkup_indx[params->lkup_idx] = params->fv_idx;
+ if (params->mask_valid)
+ rcp_list->content.mask[params->lkup_idx] =
+ CPU_TO_LE16(params->mask);
+
+ if (params->ignore_valid)
+ rcp_list->content.lkup_indx[params->lkup_idx] |=
+ ICE_AQ_RECIPE_LKUP_IGNORE;
+
+ status = ice_aq_add_recipe(hw, &rcp_list[0], 1, NULL);
+ if (status)
+ ice_debug(hw, ICE_DBG_SW, "Failed to update recipe %d lkup_idx %d fv_idx %d mask %d mask_valid %s, status %d\n",
+ params->rid, params->lkup_idx, params->fv_idx,
+ params->mask, params->mask_valid ? "true" : "false",
+ status);
+
+error_out:
+ ice_free(hw, rcp_list);
+ return status;
+}
+
/**
* ice_aq_map_recipe_to_profile - Map recipe to packet profile
* @hw: pointer to the HW struct
diff --git a/drivers/net/ice/base/ice_switch.h b/drivers/net/ice/base/ice_switch.h
index 392eb369c7..78e6be35a9 100644
--- a/drivers/net/ice/base/ice_switch.h
+++ b/drivers/net/ice/base/ice_switch.h
@@ -202,6 +202,15 @@ struct ice_fltr_info {
u8 lan_en; /* Indicate if packet can be forwarded to the uplink */
};
+struct ice_update_recipe_lkup_idx_params {
+ u16 rid;
+ u16 fv_idx;
+ bool ignore_valid;
+ u16 mask;
+ bool mask_valid;
+ u8 lkup_idx;
+};
+
struct ice_adv_lkup_elem {
enum ice_protocol_type type;
union ice_prot_hdr h_u; /* Header values */
@@ -524,4 +533,7 @@ ice_replay_vsi_all_fltr(struct ice_hw *hw, struct ice_port_info *pi,
void ice_rm_sw_replay_rule_info(struct ice_hw *hw, struct ice_switch_info *sw);
void ice_rm_all_sw_replay_rule_info(struct ice_hw *hw);
bool ice_is_prof_rule(enum ice_sw_tunnel_type type);
+enum ice_status
+ice_update_recipe_lkup_idx(struct ice_hw *hw,
+ struct ice_update_recipe_lkup_idx_params *params);
#endif /* _ICE_SWITCH_H_ */
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index 996b58b743..a4a4427693 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -986,7 +986,7 @@ struct ice_hw {
ice_declare_bitmap(fdir_perfect_fltr, ICE_FLTR_PTYPE_MAX);
struct ice_lock rss_locks; /* protect RSS configuration */
struct LIST_HEAD_TYPE rss_list_head;
- struct ice_vlan_mode_ops vlan_mode_ops;
+ u8 dvm_ena;
};
/* Statistics collected by each port, VSI, VEB, and S-channel */
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index c4e7a40295..c86e803c52 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -55,21 +55,100 @@ ice_pkg_get_supported_vlan_mode(struct ice_hw *hw, bool *dvm)
}
/**
- * ice_is_dvm_supported - check if double VLAN mode is supported based on DDP
+ * ice_aq_get_vlan_mode - get the VLAN mode of the device
+ * @hw: pointer to the HW structure
+ * @get_params: structure FW fills in based on the current VLAN mode config
+ *
+ * Get VLAN Mode Parameters (0x020D)
+ */
+static enum ice_status
+ice_aq_get_vlan_mode(struct ice_hw *hw,
+ struct ice_aqc_get_vlan_mode *get_params)
+{
+ struct ice_aq_desc desc;
+
+ if (!get_params)
+ return ICE_ERR_PARAM;
+
+ ice_fill_dflt_direct_cmd_desc(&desc,
+ ice_aqc_opc_get_vlan_mode_parameters);
+
+ return ice_aq_send_cmd(hw, &desc, get_params, sizeof(*get_params),
+ NULL);
+}
+
+/**
+ * ice_aq_is_dvm_ena - query FW to check if double VLAN mode is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Returns true if the hardware/firmware is configured in double VLAN mode,
+ * else return false signaling that the hardware/firmware is configured in
+ * single VLAN mode.
+ *
+ * Also, return false if this call fails for any reason (i.e. firmware doesn't
+ * support this AQ call).
+ */
+static bool ice_aq_is_dvm_ena(struct ice_hw *hw)
+{
+ struct ice_aqc_get_vlan_mode get_params = { 0 };
+ enum ice_status status;
+
+ status = ice_aq_get_vlan_mode(hw, &get_params);
+ if (status) {
+ ice_debug(hw, ICE_DBG_AQ, "Failed to get VLAN mode, status %d\n",
+ status);
+ return false;
+ }
+
+ return (get_params.vlan_mode & ICE_AQ_VLAN_MODE_DVM_ENA);
+}
+
+/**
+ * ice_is_dvm_ena - check if double VLAN mode is enabled
+ * @hw: pointer to the HW structure
+ *
+ * The device is configured in single or double VLAN mode on initialization and
+ * this cannot be dynamically changed during runtime. Based on this there is no
+ * need to make an AQ call every time the driver needs to know the VLAN mode.
+ * Instead, use the cached VLAN mode.
+ */
+bool ice_is_dvm_ena(struct ice_hw *hw)
+{
+ return hw->dvm_ena;
+}
+
+/**
+ * ice_cache_vlan_mode - cache VLAN mode after DDP is downloaded
+ * @hw: pointer to the HW structure
+ *
+ * This is only called after downloading the DDP and after the global
+ * configuration lock has been released because all ports on a device need to
+ * cache the VLAN mode.
+ */
+void ice_cache_vlan_mode(struct ice_hw *hw)
+{
+ hw->dvm_ena = ice_aq_is_dvm_ena(hw) ? true : false;
+}
+
+/**
+ * ice_is_dvm_supported - check if Double VLAN Mode is supported
* @hw: pointer to the hardware structure
*
- * Returns true if DVM is supported and false if only SVM is supported. This
- * function should only be called while the global config lock is held and after
- * the package has been successfully downloaded.
+ * Returns true if Double VLAN Mode (DVM) is supported and false if only Single
+ * VLAN Mode (SVM) is supported. In order for DVM to be supported the DDP and
+ * firmware must support it, otherwise only SVM is supported. This function
+ * should only be called while the global config lock is held and after the
+ * package has been successfully downloaded.
*/
static bool ice_is_dvm_supported(struct ice_hw *hw)
{
+ struct ice_aqc_get_vlan_mode get_vlan_mode = { 0 };
enum ice_status status;
bool pkg_supports_dvm;
status = ice_pkg_get_supported_vlan_mode(hw, &pkg_supports_dvm);
if (status) {
- ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, err %d\n",
+ ice_debug(hw, ICE_DBG_PKG, "Failed to get supported VLAN mode, status %d\n",
status);
return false;
}
@@ -77,28 +156,196 @@ static bool ice_is_dvm_supported(struct ice_hw *hw)
if (!pkg_supports_dvm)
return false;
+ /* If firmware returns success, then it supports DVM, else it only
+ * supports SVM
+ */
+ status = ice_aq_get_vlan_mode(hw, &get_vlan_mode);
+ if (status) {
+ ice_debug(hw, ICE_DBG_NVM, "Failed to get VLAN mode, status %d\n",
+ status);
+ return false;
+ }
+
return true;
}
+#define ICE_EXTERNAL_VLAN_ID_FV_IDX 11
+#define ICE_SW_LKUP_VLAN_LOC_LKUP_IDX 1
+#define ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX 2
+#define ICE_SW_LKUP_PROMISC_VLAN_LOC_LKUP_IDX 2
+#define ICE_PKT_FLAGS_0_TO_15_FV_IDX 1
+#define ICE_PKT_FLAGS_0_TO_15_VLAN_FLAGS_MASK 0xD000
+static struct ice_update_recipe_lkup_idx_params ice_dvm_dflt_recipes[] = {
+ {
+ /* Update recipe ICE_SW_LKUP_VLAN to filter based on the
+ * outer/single VLAN in DVM
+ */
+ .rid = ICE_SW_LKUP_VLAN,
+ .fv_idx = ICE_EXTERNAL_VLAN_ID_FV_IDX,
+ .ignore_valid = true,
+ .mask = 0,
+ .mask_valid = false, /* use pre-existing mask */
+ .lkup_idx = ICE_SW_LKUP_VLAN_LOC_LKUP_IDX,
+ },
+ {
+ /* Update recipe ICE_SW_LKUP_VLAN to filter based on the VLAN
+ * packet flags to support VLAN filtering on multiple VLAN
+ * ethertypes (i.e. 0x8100 and 0x88a8) in DVM
+ */
+ .rid = ICE_SW_LKUP_VLAN,
+ .fv_idx = ICE_PKT_FLAGS_0_TO_15_FV_IDX,
+ .ignore_valid = false,
+ .mask = ICE_PKT_FLAGS_0_TO_15_VLAN_FLAGS_MASK,
+ .mask_valid = true,
+ .lkup_idx = ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX,
+ },
+ {
+ /* Update recipe ICE_SW_LKUP_PROMISC_VLAN to filter based on the
+ * outer/single VLAN in DVM
+ */
+ .rid = ICE_SW_LKUP_PROMISC_VLAN,
+ .fv_idx = ICE_EXTERNAL_VLAN_ID_FV_IDX,
+ .ignore_valid = true,
+ .mask = 0,
+ .mask_valid = false, /* use pre-existing mask */
+ .lkup_idx = ICE_SW_LKUP_PROMISC_VLAN_LOC_LKUP_IDX,
+ },
+};
+
/**
- * ice_set_svm - set single VLAN mode
+ * ice_dvm_update_dflt_recipes - update default switch recipes in DVM
+ * @hw: hardware structure used to update the recipes
+ */
+static enum ice_status ice_dvm_update_dflt_recipes(struct ice_hw *hw)
+{
+ unsigned long i;
+
+ for (i = 0; i < ARRAY_SIZE(ice_dvm_dflt_recipes); i++) {
+ struct ice_update_recipe_lkup_idx_params *params;
+ enum ice_status status;
+
+ params = &ice_dvm_dflt_recipes[i];
+
+ status = ice_update_recipe_lkup_idx(hw, params);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to update RID %d lkup_idx %d fv_idx %d mask_valid %s mask 0x%04x\n",
+ params->rid, params->lkup_idx, params->fv_idx,
+ params->mask_valid ? "true" : "false",
+ params->mask);
+ return status;
+ }
+ }
+
+ return ICE_SUCCESS;
+}
+
+/**
+ * ice_aq_set_vlan_mode - set the VLAN mode of the device
* @hw: pointer to the HW structure
+ * @set_params: requested VLAN mode configuration
+ *
+ * Set VLAN Mode Parameters (0x020C)
+ */
+static enum ice_status
+ice_aq_set_vlan_mode(struct ice_hw *hw,
+ struct ice_aqc_set_vlan_mode *set_params)
+{
+ u8 rdma_packet, mng_vlan_prot_id;
+ struct ice_aq_desc desc;
+
+ if (!set_params)
+ return ICE_ERR_PARAM;
+
+ if (set_params->l2tag_prio_tagging > ICE_AQ_VLAN_PRIO_TAG_MAX)
+ return ICE_ERR_PARAM;
+
+ rdma_packet = set_params->rdma_packet;
+ if (rdma_packet != ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING &&
+ rdma_packet != ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING)
+ return ICE_ERR_PARAM;
+
+ mng_vlan_prot_id = set_params->mng_vlan_prot_id;
+ if (mng_vlan_prot_id != ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER &&
+ mng_vlan_prot_id != ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER)
+ return ICE_ERR_PARAM;
+
+ ice_fill_dflt_direct_cmd_desc(&desc,
+ ice_aqc_opc_set_vlan_mode_parameters);
+ desc.flags |= CPU_TO_LE16(ICE_AQ_FLAG_RD);
+
+ return ice_aq_send_cmd(hw, &desc, set_params, sizeof(*set_params),
+ NULL);
+}
+
+/**
+ * ice_set_dvm - sets up software and hardware for double VLAN mode
+ * @hw: pointer to the hardware structure
*/
-static enum ice_status ice_set_svm_dflt(struct ice_hw *hw)
+static enum ice_status ice_set_dvm(struct ice_hw *hw)
{
- ice_debug(hw, ICE_DBG_TRACE, "%s\n", __func__);
+ struct ice_aqc_set_vlan_mode params = { 0 };
+ enum ice_status status;
+
+ params.l2tag_prio_tagging = ICE_AQ_VLAN_PRIO_TAG_OUTER_CTAG;
+ params.rdma_packet = ICE_AQ_DVM_VLAN_RDMA_PKT_FLAG_SETTING;
+ params.mng_vlan_prot_id = ICE_AQ_VLAN_MNG_PROTOCOL_ID_OUTER;
+
+ status = ice_aq_set_vlan_mode(hw, ¶ms);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set double VLAN mode parameters, status %d\n",
+ status);
+ return status;
+ }
- return ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+ status = ice_dvm_update_dflt_recipes(hw);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to update default recipes for double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
+ status = ice_aq_set_port_params(hw->port_info, 0, false, false, true,
+ NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set port in double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
+ return ICE_SUCCESS;
}
/**
- * ice_init_vlan_mode_ops - initialize VLAN mode configuration ops
+ * ice_set_svm - set single VLAN mode
* @hw: pointer to the HW structure
*/
-void ice_init_vlan_mode_ops(struct ice_hw *hw)
+static enum ice_status ice_set_svm(struct ice_hw *hw)
{
- hw->vlan_mode_ops.set_dvm = NULL;
- hw->vlan_mode_ops.set_svm = ice_set_svm_dflt;
+ struct ice_aqc_set_vlan_mode *set_params;
+ enum ice_status status;
+
+ status = ice_aq_set_port_params(hw->port_info, 0, false, false, false, NULL);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set port parameters for single VLAN mode\n");
+ return status;
+ }
+
+ set_params = (struct ice_aqc_set_vlan_mode *)
+ ice_malloc(hw, sizeof(*set_params));
+ if (!set_params)
+ return ICE_ERR_NO_MEMORY;
+
+ /* default configuration for SVM configurations */
+ set_params->l2tag_prio_tagging = ICE_AQ_VLAN_PRIO_TAG_INNER_CTAG;
+ set_params->rdma_packet = ICE_AQ_SVM_VLAN_RDMA_PKT_FLAG_SETTING;
+ set_params->mng_vlan_prot_id = ICE_AQ_VLAN_MNG_PROTOCOL_ID_INNER;
+
+ status = ice_aq_set_vlan_mode(hw, set_params);
+ if (status)
+ ice_debug(hw, ICE_DBG_INIT, "Failed to configure port in single VLAN mode\n");
+
+ ice_free(hw, set_params);
+ return status;
}
/**
@@ -107,16 +354,11 @@ void ice_init_vlan_mode_ops(struct ice_hw *hw)
*/
enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
{
- enum ice_status status = ICE_ERR_NOT_IMPL;
-
if (!ice_is_dvm_supported(hw))
return ICE_SUCCESS;
- if (hw->vlan_mode_ops.set_dvm)
- status = hw->vlan_mode_ops.set_dvm(hw);
-
- if (status)
- return hw->vlan_mode_ops.set_svm(hw);
+ if (!ice_set_dvm(hw))
+ return ICE_SUCCESS;
- return ICE_SUCCESS;
+ return ice_set_svm(hw);
}
diff --git a/drivers/net/ice/base/ice_vlan_mode.h b/drivers/net/ice/base/ice_vlan_mode.h
index 1b9db4d36f..134bd41635 100644
--- a/drivers/net/ice/base/ice_vlan_mode.h
+++ b/drivers/net/ice/base/ice_vlan_mode.h
@@ -5,28 +5,12 @@
#ifndef _ICE_VLAN_MODE_H_
#define _ICE_VLAN_MODE_H_
+#include "ice_osdep.h"
+
struct ice_hw;
+bool ice_is_dvm_ena(struct ice_hw *hw);
+void ice_cache_vlan_mode(struct ice_hw *hw);
enum ice_status ice_set_vlan_mode(struct ice_hw *hw);
-void ice_init_vlan_mode_ops(struct ice_hw *hw);
-
-/* This structure defines the VLAN mode configuration interface. It is used to set the VLAN mode.
- *
- * Note: These operations will be called while the global configuration lock is held.
- *
- * enum ice_status (*set_svm)(struct ice_hw *hw);
- * This function is called when the DDP and/or Firmware don't support double VLAN mode (DVM) or
- * if the set_dvm op is not implemented and/or returns failure. It will set the device in
- * single VLAN mode (SVM).
- *
- * enum ice_status (*set_dvm)(struct ice_hw *hw);
- * This function is called when the DDP and Firmware support double VLAN mode (DVM). It should
- * be implemented to set double VLAN mode. If it fails or remains unimplemented, set_svm will
- * be called as a fallback plan.
- */
-struct ice_vlan_mode_ops {
- enum ice_status (*set_svm)(struct ice_hw *hw);
- enum ice_status (*set_dvm)(struct ice_hw *hw);
-};
#endif /* _ICE_VLAN_MODE_H */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 07/18] net/ice/base: do not set VLAN mode in DCF mode
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (5 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 06/18] net/ice/base: support configuring device in " Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 08/18] net/ice/base: update boost TCAM for DVM Haiyue Wang
` (11 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Qiming Yang
[ upstream commit 70f4e156ea52e3d8278acff30d06447eab623a15 ]
The PF will set the VLAN mode globally, DCF just needs to get the VLAN
mode.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_vlan_mode.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index c86e803c52..42bb108928 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -354,6 +354,12 @@ static enum ice_status ice_set_svm(struct ice_hw *hw)
*/
enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
{
+ /* DCF only has the ability to query the VLAN mode. Setting the VLAN
+ * mode is done by the PF.
+ */
+ if (hw->dcf_enabled)
+ return ICE_SUCCESS;
+
if (!ice_is_dvm_supported(hw))
return ICE_SUCCESS;
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 08/18] net/ice/base: update boost TCAM for DVM
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (6 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 07/18] net/ice/base: do not set VLAN mode in DCF mode Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 09/18] net/ice/base: change protocol ID for VLAN in DVM Haiyue Wang
` (10 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Dan Nowlin, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit f977165db0ba8435269a5e19e0e9239a4b22d140 ]
Add code to update boost TCAM entries to enable DVM. This requires
enabled DVM entries, and disabling SVM entries.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_flex_pipe.c | 223 +++++++++++++++++++++++----
drivers/net/ice/base/ice_flex_pipe.h | 1 +
drivers/net/ice/base/ice_flex_type.h | 13 ++
drivers/net/ice/base/ice_type.h | 2 +
drivers/net/ice/base/ice_vlan_mode.c | 7 +
5 files changed, 213 insertions(+), 33 deletions(-)
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index cced7b6352..058694653a 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -7,9 +7,17 @@
#include "ice_protocol_type.h"
#include "ice_flow.h"
+/* For supporting double VLAN mode, it is necessary to enable or disable certain
+ * boost tcam entries. The metadata labels names that match the following
+ * prefixes will be saved to allow enabling double VLAN mode.
+ */
+#define ICE_DVM_PRE "BOOST_MAC_VLAN_DVM" /* enable these entries */
+#define ICE_SVM_PRE "BOOST_MAC_VLAN_SVM" /* disable these entries */
+
/* To support tunneling entries by PF, the package will append the PF number to
* the label; for example TNL_VXLAN_PF0, TNL_VXLAN_PF1, TNL_VXLAN_PF2, etc.
*/
+#define ICE_TNL_PRE "TNL_"
static const struct ice_tunnel_type_scan tnls[] = {
{ TNL_VXLAN, "TNL_VXLAN_PF" },
{ TNL_GENEVE, "TNL_GENEVE_PF" },
@@ -452,6 +460,57 @@ ice_enum_labels(struct ice_seg *ice_seg, u32 type, struct ice_pkg_enum *state,
return label->name;
}
+/**
+ * ice_add_tunnel_hint
+ * @hw: pointer to the HW structure
+ * @label_name: label text
+ * @val: value of the tunnel port boost entry
+ */
+static void ice_add_tunnel_hint(struct ice_hw *hw, char *label_name, u16 val)
+{
+ if (hw->tnl.count < ICE_TUNNEL_MAX_ENTRIES) {
+ u16 i;
+
+ for (i = 0; tnls[i].type != TNL_LAST; i++) {
+ size_t len = strlen(tnls[i].label_prefix);
+
+ /* Look for matching label start, before continuing */
+ if (strncmp(label_name, tnls[i].label_prefix, len))
+ continue;
+
+ /* Make sure this label matches our PF. Note that the PF
+ * character ('0' - '7') will be located where our
+ * prefix string's null terminator is located.
+ */
+ if ((label_name[len] - '0') == hw->pf_id) {
+ hw->tnl.tbl[hw->tnl.count].type = tnls[i].type;
+ hw->tnl.tbl[hw->tnl.count].valid = false;
+ hw->tnl.tbl[hw->tnl.count].in_use = false;
+ hw->tnl.tbl[hw->tnl.count].marked = false;
+ hw->tnl.tbl[hw->tnl.count].boost_addr = val;
+ hw->tnl.tbl[hw->tnl.count].port = 0;
+ hw->tnl.count++;
+ break;
+ }
+ }
+ }
+}
+
+/**
+ * ice_add_dvm_hint
+ * @hw: pointer to the HW structure
+ * @val: value of the boost entry
+ * @enable: true if entry needs to be enabled, or false if needs to be disabled
+ */
+static void ice_add_dvm_hint(struct ice_hw *hw, u16 val, bool enable)
+{
+ if (hw->dvm_upd.count < ICE_DVM_MAX_ENTRIES) {
+ hw->dvm_upd.tbl[hw->dvm_upd.count].boost_addr = val;
+ hw->dvm_upd.tbl[hw->dvm_upd.count].enable = enable;
+ hw->dvm_upd.count++;
+ }
+}
+
/**
* ice_init_pkg_hints
* @hw: pointer to the HW structure
@@ -478,40 +537,34 @@ static void ice_init_pkg_hints(struct ice_hw *hw, struct ice_seg *ice_seg)
label_name = ice_enum_labels(ice_seg, ICE_SID_LBL_RXPARSER_TMEM, &state,
&val);
- while (label_name && hw->tnl.count < ICE_TUNNEL_MAX_ENTRIES) {
- for (i = 0; tnls[i].type != TNL_LAST; i++) {
- size_t len = strlen(tnls[i].label_prefix);
+ while (label_name) {
+ if (!strncmp(label_name, ICE_TNL_PRE, strlen(ICE_TNL_PRE)))
+ /* check for a tunnel entry */
+ ice_add_tunnel_hint(hw, label_name, val);
- /* Look for matching label start, before continuing */
- if (strncmp(label_name, tnls[i].label_prefix, len))
- continue;
+ /* check for a dvm mode entry */
+ else if (!strncmp(label_name, ICE_DVM_PRE, strlen(ICE_DVM_PRE)))
+ ice_add_dvm_hint(hw, val, true);
- /* Make sure this label matches our PF. Note that the PF
- * character ('0' - '7') will be located where our
- * prefix string's null terminator is located.
- */
- if ((label_name[len] - '0') == hw->pf_id) {
- hw->tnl.tbl[hw->tnl.count].type = tnls[i].type;
- hw->tnl.tbl[hw->tnl.count].valid = false;
- hw->tnl.tbl[hw->tnl.count].in_use = false;
- hw->tnl.tbl[hw->tnl.count].marked = false;
- hw->tnl.tbl[hw->tnl.count].boost_addr = val;
- hw->tnl.tbl[hw->tnl.count].port = 0;
- hw->tnl.count++;
- break;
- }
- }
+ /* check for a svm mode entry */
+ else if (!strncmp(label_name, ICE_SVM_PRE, strlen(ICE_SVM_PRE)))
+ ice_add_dvm_hint(hw, val, false);
label_name = ice_enum_labels(NULL, 0, &state, &val);
}
- /* Cache the appropriate boost TCAM entry pointers */
+ /* Cache the appropriate boost TCAM entry pointers for tunnels */
for (i = 0; i < hw->tnl.count; i++) {
ice_find_boost_entry(ice_seg, hw->tnl.tbl[i].boost_addr,
&hw->tnl.tbl[i].boost_entry);
if (hw->tnl.tbl[i].boost_entry)
hw->tnl.tbl[i].valid = true;
}
+
+ /* Cache the appropriate boost TCAM entry pointers for DVM and SVM */
+ for (i = 0; i < hw->dvm_upd.count; i++)
+ ice_find_boost_entry(ice_seg, hw->dvm_upd.tbl[i].boost_addr,
+ &hw->dvm_upd.tbl[i].boost_entry);
}
/* Key creation */
@@ -916,26 +969,21 @@ ice_find_seg_in_pkg(struct ice_hw *hw, u32 seg_type,
}
/**
- * ice_update_pkg
+ * ice_update_pkg_no_lock
* @hw: pointer to the hardware structure
* @bufs: pointer to an array of buffers
* @count: the number of buffers in the array
- *
- * Obtains change lock and updates package.
*/
-enum ice_status
-ice_update_pkg(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
+static enum ice_status
+ice_update_pkg_no_lock(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
{
- enum ice_status status;
- u32 offset, info, i;
-
- status = ice_acquire_change_lock(hw, ICE_RES_WRITE);
- if (status)
- return status;
+ enum ice_status status = ICE_SUCCESS;
+ u32 i;
for (i = 0; i < count; i++) {
struct ice_buf_hdr *bh = (struct ice_buf_hdr *)(bufs + i);
bool last = ((i + 1) == count);
+ u32 offset, info;
status = ice_aq_update_pkg(hw, bh, LE16_TO_CPU(bh->data_end),
last, &offset, &info, NULL);
@@ -947,6 +995,28 @@ ice_update_pkg(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
}
}
+ return status;
+}
+
+/**
+ * ice_update_pkg
+ * @hw: pointer to the hardware structure
+ * @bufs: pointer to an array of buffers
+ * @count: the number of buffers in the array
+ *
+ * Obtains change lock and updates package.
+ */
+enum ice_status
+ice_update_pkg(struct ice_hw *hw, struct ice_buf *bufs, u32 count)
+{
+ enum ice_status status;
+
+ status = ice_acquire_change_lock(hw, ICE_RES_WRITE);
+ if (status)
+ return status;
+
+ status = ice_update_pkg_no_lock(hw, bufs, count);
+
ice_release_change_lock(hw);
return status;
@@ -2122,6 +2192,93 @@ ice_get_open_tunnel_port(struct ice_hw *hw, enum ice_tunnel_type type,
return res;
}
+/**
+ * ice_upd_dvm_boost_entry
+ * @hw: pointer to the HW structure
+ * @entry: pointer to double vlan boost entry info
+ */
+static enum ice_status
+ice_upd_dvm_boost_entry(struct ice_hw *hw, struct ice_dvm_entry *entry)
+{
+ struct ice_boost_tcam_section *sect_rx, *sect_tx;
+ enum ice_status status = ICE_ERR_MAX_LIMIT;
+ struct ice_buf_build *bld;
+ u8 val, dc, nm;
+
+ bld = ice_pkg_buf_alloc(hw);
+ if (!bld)
+ return ICE_ERR_NO_MEMORY;
+
+ /* allocate 2 sections, one for Rx parser, one for Tx parser */
+ if (ice_pkg_buf_reserve_section(bld, 2))
+ goto ice_upd_dvm_boost_entry_err;
+
+ sect_rx = (struct ice_boost_tcam_section *)
+ ice_pkg_buf_alloc_section(bld, ICE_SID_RXPARSER_BOOST_TCAM,
+ ice_struct_size(sect_rx, tcam, 1));
+ if (!sect_rx)
+ goto ice_upd_dvm_boost_entry_err;
+ sect_rx->count = CPU_TO_LE16(1);
+
+ sect_tx = (struct ice_boost_tcam_section *)
+ ice_pkg_buf_alloc_section(bld, ICE_SID_TXPARSER_BOOST_TCAM,
+ ice_struct_size(sect_tx, tcam, 1));
+ if (!sect_tx)
+ goto ice_upd_dvm_boost_entry_err;
+ sect_tx->count = CPU_TO_LE16(1);
+
+ /* copy original boost entry to update package buffer */
+ ice_memcpy(sect_rx->tcam, entry->boost_entry, sizeof(*sect_rx->tcam),
+ ICE_NONDMA_TO_NONDMA);
+
+ /* re-write the don't care and never match bits accordingly */
+ if (entry->enable) {
+ /* all bits are don't care */
+ val = 0x00;
+ dc = 0xFF;
+ nm = 0x00;
+ } else {
+ /* disable, one never match bit, the rest are don't care */
+ val = 0x00;
+ dc = 0xF7;
+ nm = 0x08;
+ }
+
+ ice_set_key((u8 *)§_rx->tcam[0].key, sizeof(sect_rx->tcam[0].key),
+ &val, NULL, &dc, &nm, 0, sizeof(u8));
+
+ /* exact copy of entry to Tx section entry */
+ ice_memcpy(sect_tx->tcam, sect_rx->tcam, sizeof(*sect_tx->tcam),
+ ICE_NONDMA_TO_NONDMA);
+
+ status = ice_update_pkg_no_lock(hw, ice_pkg_buf(bld), 1);
+
+ice_upd_dvm_boost_entry_err:
+ ice_pkg_buf_free(hw, bld);
+
+ return status;
+}
+
+/**
+ * ice_set_dvm_boost_entries
+ * @hw: pointer to the HW structure
+ *
+ * Enable double vlan by updating the appropriate boost tcam entries.
+ */
+enum ice_status ice_set_dvm_boost_entries(struct ice_hw *hw)
+{
+ enum ice_status status;
+ u16 i;
+
+ for (i = 0; i < hw->dvm_upd.count; i++) {
+ status = ice_upd_dvm_boost_entry(hw, &hw->dvm_upd.tbl[i]);
+ if (status)
+ return status;
+ }
+
+ return ICE_SUCCESS;
+}
+
/**
* ice_create_tunnel
* @hw: pointer to the HW structure
diff --git a/drivers/net/ice/base/ice_flex_pipe.h b/drivers/net/ice/base/ice_flex_pipe.h
index d4679cc940..61ce092319 100644
--- a/drivers/net/ice/base/ice_flex_pipe.h
+++ b/drivers/net/ice/base/ice_flex_pipe.h
@@ -49,6 +49,7 @@ ice_get_open_tunnel_port(struct ice_hw *hw, enum ice_tunnel_type type,
u16 *port);
enum ice_status
ice_create_tunnel(struct ice_hw *hw, enum ice_tunnel_type type, u16 port);
+enum ice_status ice_set_dvm_boost_entries(struct ice_hw *hw);
enum ice_status ice_destroy_tunnel(struct ice_hw *hw, u16 port, bool all);
bool ice_tunnel_port_in_use(struct ice_hw *hw, u16 port, u16 *index);
bool
diff --git a/drivers/net/ice/base/ice_flex_type.h b/drivers/net/ice/base/ice_flex_type.h
index 169476369b..dfa3cf3020 100644
--- a/drivers/net/ice/base/ice_flex_type.h
+++ b/drivers/net/ice/base/ice_flex_type.h
@@ -543,6 +543,19 @@ struct ice_tunnel_table {
u16 count;
};
+struct ice_dvm_entry {
+ u16 boost_addr;
+ u16 enable;
+ struct ice_boost_tcam_entry *boost_entry;
+};
+
+#define ICE_DVM_MAX_ENTRIES 48
+
+struct ice_dvm_table {
+ struct ice_dvm_entry tbl[ICE_DVM_MAX_ENTRIES];
+ u16 count;
+};
+
struct ice_pkg_es {
__le16 count;
__le16 offset;
diff --git a/drivers/net/ice/base/ice_type.h b/drivers/net/ice/base/ice_type.h
index a4a4427693..104f5dc101 100644
--- a/drivers/net/ice/base/ice_type.h
+++ b/drivers/net/ice/base/ice_type.h
@@ -962,6 +962,8 @@ struct ice_hw {
/* tunneling info */
struct ice_lock tnl_lock;
struct ice_tunnel_table tnl;
+ /* dvm boost update information */
+ struct ice_dvm_table dvm_upd;
struct ice_acl_tbl *acl_tbl;
struct ice_fd_hw_prof **acl_prof;
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 42bb108928..4a749cb9f1 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -312,6 +312,13 @@ static enum ice_status ice_set_dvm(struct ice_hw *hw)
return status;
}
+ status = ice_set_dvm_boost_entries(hw);
+ if (status) {
+ ice_debug(hw, ICE_DBG_INIT, "Failed to set boost TCAM entries for double VLAN mode, status %d\n",
+ status);
+ return status;
+ }
+
return ICE_SUCCESS;
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 09/18] net/ice/base: change protocol ID for VLAN in DVM
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (7 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 08/18] net/ice/base: update boost TCAM for DVM Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 10/18] net/ice/base: refactor post DDP download VLAN mode config Haiyue Wang
` (9 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Michal Swiatkowski, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 8d7bb8d500b1ccdeb30668516064337faa20b364 ]
Protocol id for first vlan in Double VLAN Mode (DVM) should be
ICE_VLAN_OF_HW = 16, but for Single VLAN Mode (SVM) this should be
ICE_VLAN_OL_HW = 17.
Change protocol id in type to id translation array for outer vlan
to 17 when DVM is enabled, which means the driver, package,
and firmware support DVM.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_flex_pipe.c | 3 +++
drivers/net/ice/base/ice_switch.c | 19 ++++++++++++++++++-
drivers/net/ice/base/ice_switch.h | 1 +
3 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index 058694653a..a92c2b8494 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1166,6 +1166,9 @@ ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
ice_cache_vlan_mode(hw);
+ if (ice_is_dvm_ena(hw))
+ ice_change_proto_id_to_dvm();
+
return status;
}
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index df8319a7e7..55bfc3e6c5 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -6127,7 +6127,7 @@ static const struct ice_prot_ext_tbl_entry ice_prot_ext[ICE_PROTOCOL_LAST] = {
* following policy.
*/
-static const struct ice_protocol_entry ice_prot_id_tbl[ICE_PROTOCOL_LAST] = {
+static struct ice_protocol_entry ice_prot_id_tbl[ICE_PROTOCOL_LAST] = {
{ ICE_MAC_OFOS, ICE_MAC_OFOS_HW },
{ ICE_MAC_IL, ICE_MAC_IL_HW },
{ ICE_ETYPE_OL, ICE_ETYPE_OL_HW },
@@ -6232,6 +6232,23 @@ static u16 ice_find_recp(struct ice_hw *hw, struct ice_prot_lkup_ext *lkup_exts,
return ICE_MAX_NUM_RECIPES;
}
+/**
+ * ice_change_proto_id_to_dvm - change proto id in prot_id_tbl
+ *
+ * As protocol id for outer vlan is different in dvm and svm, if dvm is
+ * supported protocol array record for outer vlan has to be modified to
+ * reflect the value proper for DVM.
+ */
+void ice_change_proto_id_to_dvm(void)
+{
+ u8 i;
+
+ for (i = 0; i < ARRAY_SIZE(ice_prot_id_tbl); i++)
+ if (ice_prot_id_tbl[i].type == ICE_VLAN_OFOS &&
+ ice_prot_id_tbl[i].protocol_id != ICE_VLAN_OF_HW)
+ ice_prot_id_tbl[i].protocol_id = ICE_VLAN_OF_HW;
+}
+
/**
* ice_prot_type_to_id - get protocol ID from protocol type
* @type: protocol type
diff --git a/drivers/net/ice/base/ice_switch.h b/drivers/net/ice/base/ice_switch.h
index 78e6be35a9..dd50820430 100644
--- a/drivers/net/ice/base/ice_switch.h
+++ b/drivers/net/ice/base/ice_switch.h
@@ -536,4 +536,5 @@ bool ice_is_prof_rule(enum ice_sw_tunnel_type type);
enum ice_status
ice_update_recipe_lkup_idx(struct ice_hw *hw,
struct ice_update_recipe_lkup_idx_params *params);
+void ice_change_proto_id_to_dvm(void);
#endif /* _ICE_SWITCH_H_ */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 10/18] net/ice/base: refactor post DDP download VLAN mode config
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (8 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 09/18] net/ice/base: change protocol ID for VLAN in DVM Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 11/18] net/ice/base: log if DDP/FW do not support QinQ Haiyue Wang
` (8 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 5ade55ab43e6c07a904c03ebe2d796fdea94e7e0 ]
Currently it's not clear that only the first PF downloads the package
and configures the VLAN mode. When this is happening all other PFs are
blocked on the global configuration lock. Once the package is
successfully downloaded and the global configuration lock has been
released then all PFs resume initialization. This includes some post
package download VLAN mode configuration. To make this more obvious add
the new function ice_post_pkg_dwnld_vlan_mode_cfg() so any/all post
download VLAN mode configuration code can be put in here.
This also makes it more clear that all PFs will call this new function.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_flex_pipe.c | 5 +----
drivers/net/ice/base/ice_vlan_mode.c | 23 ++++++++++++++++++++++-
drivers/net/ice/base/ice_vlan_mode.h | 2 +-
3 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ice/base/ice_flex_pipe.c b/drivers/net/ice/base/ice_flex_pipe.c
index a92c2b8494..e04b863de3 100644
--- a/drivers/net/ice/base/ice_flex_pipe.c
+++ b/drivers/net/ice/base/ice_flex_pipe.c
@@ -1164,10 +1164,7 @@ ice_download_pkg(struct ice_hw *hw, struct ice_seg *ice_seg)
status = ice_dwnld_cfg_bufs(hw, ice_buf_tbl->buf_array,
LE32_TO_CPU(ice_buf_tbl->buf_count));
- ice_cache_vlan_mode(hw);
-
- if (ice_is_dvm_ena(hw))
- ice_change_proto_id_to_dvm();
+ ice_post_pkg_dwnld_vlan_mode_cfg(hw);
return status;
}
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 4a749cb9f1..4340189355 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -125,7 +125,7 @@ bool ice_is_dvm_ena(struct ice_hw *hw)
* configuration lock has been released because all ports on a device need to
* cache the VLAN mode.
*/
-void ice_cache_vlan_mode(struct ice_hw *hw)
+static void ice_cache_vlan_mode(struct ice_hw *hw)
{
hw->dvm_ena = ice_aq_is_dvm_ena(hw) ? true : false;
}
@@ -375,3 +375,24 @@ enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
return ice_set_svm(hw);
}
+
+/**
+ * ice_post_pkg_dwnld_vlan_mode_cfg - configure VLAN mode after DDP download
+ * @hw: pointer to the HW structure
+ *
+ * This function is meant to configure any VLAN mode specific functionality
+ * after the global configuration lock has been released and the DDP has been
+ * downloaded.
+ *
+ * Since only one PF downloads the DDP and configures the VLAN mode there needs
+ * to be a way to configure the other PFs after the DDP has been downloaded and
+ * the global configuration lock has been released. All such code should go in
+ * this function.
+ */
+void ice_post_pkg_dwnld_vlan_mode_cfg(struct ice_hw *hw)
+{
+ ice_cache_vlan_mode(hw);
+
+ if (ice_is_dvm_ena(hw))
+ ice_change_proto_id_to_dvm();
+}
diff --git a/drivers/net/ice/base/ice_vlan_mode.h b/drivers/net/ice/base/ice_vlan_mode.h
index 134bd41635..c22d6c2a01 100644
--- a/drivers/net/ice/base/ice_vlan_mode.h
+++ b/drivers/net/ice/base/ice_vlan_mode.h
@@ -10,7 +10,7 @@
struct ice_hw;
bool ice_is_dvm_ena(struct ice_hw *hw);
-void ice_cache_vlan_mode(struct ice_hw *hw);
enum ice_status ice_set_vlan_mode(struct ice_hw *hw);
+void ice_post_pkg_dwnld_vlan_mode_cfg(struct ice_hw *hw);
#endif /* _ICE_VLAN_MODE_H */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 11/18] net/ice/base: log if DDP/FW do not support QinQ
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (9 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 10/18] net/ice/base: refactor post DDP download VLAN mode config Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 12/18] net/ice/base: add ethertype offset for QinQ dummy packet Haiyue Wang
` (7 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Brett Creeley, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit daa2ca4217ec6bf4fafb84f78985014b20cf5444 ]
Currently if the driver supports QinQ there is no message/information
if the DDP and/or FW don't support QinQ. Add functionality that prints
if the DDP and/or FW don't support QinQ if the driver attempts to
configured DVM. This will make it more obvious to users in the field
that they need to update their DDP and/or FW.
This required a small refactor so some of the existing code could be
shared and used by this new print functionality.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_vlan_mode.c | 77 +++++++++++++++++++++++-----
1 file changed, 65 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ice/base/ice_vlan_mode.c b/drivers/net/ice/base/ice_vlan_mode.c
index 4340189355..775ebb2d6e 100644
--- a/drivers/net/ice/base/ice_vlan_mode.c
+++ b/drivers/net/ice/base/ice_vlan_mode.c
@@ -131,18 +131,11 @@ static void ice_cache_vlan_mode(struct ice_hw *hw)
}
/**
- * ice_is_dvm_supported - check if Double VLAN Mode is supported
- * @hw: pointer to the hardware structure
- *
- * Returns true if Double VLAN Mode (DVM) is supported and false if only Single
- * VLAN Mode (SVM) is supported. In order for DVM to be supported the DDP and
- * firmware must support it, otherwise only SVM is supported. This function
- * should only be called while the global config lock is held and after the
- * package has been successfully downloaded.
+ * ice_pkg_supports_dvm - find out if DDP supports DVM
+ * @hw: pointer to the HW structure
*/
-static bool ice_is_dvm_supported(struct ice_hw *hw)
+static bool ice_pkg_supports_dvm(struct ice_hw *hw)
{
- struct ice_aqc_get_vlan_mode get_vlan_mode = { 0 };
enum ice_status status;
bool pkg_supports_dvm;
@@ -153,8 +146,17 @@ static bool ice_is_dvm_supported(struct ice_hw *hw)
return false;
}
- if (!pkg_supports_dvm)
- return false;
+ return pkg_supports_dvm;
+}
+
+/**
+ * ice_fw_supports_dvm - find out if FW supports DVM
+ * @hw: pointer to the HW structure
+ */
+static bool ice_fw_supports_dvm(struct ice_hw *hw)
+{
+ struct ice_aqc_get_vlan_mode get_vlan_mode = { 0 };
+ enum ice_status status;
/* If firmware returns success, then it supports DVM, else it only
* supports SVM
@@ -169,6 +171,31 @@ static bool ice_is_dvm_supported(struct ice_hw *hw)
return true;
}
+/**
+ * ice_is_dvm_supported - check if Double VLAN Mode is supported
+ * @hw: pointer to the hardware structure
+ *
+ * Returns true if Double VLAN Mode (DVM) is supported and false if only Single
+ * VLAN Mode (SVM) is supported. In order for DVM to be supported the DDP and
+ * firmware must support it, otherwise only SVM is supported. This function
+ * should only be called while the global config lock is held and after the
+ * package has been successfully downloaded.
+ */
+static bool ice_is_dvm_supported(struct ice_hw *hw)
+{
+ if (!ice_pkg_supports_dvm(hw)) {
+ ice_debug(hw, ICE_DBG_PKG, "DDP doesn't support DVM\n");
+ return false;
+ }
+
+ if (!ice_fw_supports_dvm(hw)) {
+ ice_debug(hw, ICE_DBG_PKG, "FW doesn't support DVM\n");
+ return false;
+ }
+
+ return true;
+}
+
#define ICE_EXTERNAL_VLAN_ID_FV_IDX 11
#define ICE_SW_LKUP_VLAN_LOC_LKUP_IDX 1
#define ICE_SW_LKUP_VLAN_PKT_FLAGS_LKUP_IDX 2
@@ -376,6 +403,30 @@ enum ice_status ice_set_vlan_mode(struct ice_hw *hw)
return ice_set_svm(hw);
}
+/**
+ * ice_print_dvm_not_supported - print if DDP and/or FW doesn't support DVM
+ * @hw: pointer to the HW structure
+ *
+ * The purpose of this function is to print that QinQ is not supported due to
+ * incompatibilty from the DDP and/or FW. This will give a hint to the user to
+ * update one and/or both components if they expect QinQ functionality.
+ */
+static void ice_print_dvm_not_supported(struct ice_hw *hw)
+{
+ bool pkg_supports_dvm = ice_pkg_supports_dvm(hw);
+ bool fw_supports_dvm = ice_fw_supports_dvm(hw);
+
+ if (!fw_supports_dvm && !pkg_supports_dvm)
+ ice_info(hw, "QinQ functionality cannot be enabled on this device. "
+ "Update your DDP package and NVM to versions that support QinQ.\n");
+ else if (!pkg_supports_dvm)
+ ice_info(hw, "QinQ functionality cannot be enabled on this device. "
+ "Update your DDP package to a version that supports QinQ.\n");
+ else if (!fw_supports_dvm)
+ ice_info(hw, "QinQ functionality cannot be enabled on this device. "
+ "Update your NVM to a version that supports QinQ.\n");
+}
+
/**
* ice_post_pkg_dwnld_vlan_mode_cfg - configure VLAN mode after DDP download
* @hw: pointer to the HW structure
@@ -395,4 +446,6 @@ void ice_post_pkg_dwnld_vlan_mode_cfg(struct ice_hw *hw)
if (ice_is_dvm_ena(hw))
ice_change_proto_id_to_dvm();
+ else
+ ice_print_dvm_not_supported(hw);
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 12/18] net/ice/base: add ethertype offset for QinQ dummy packet
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (10 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 11/18] net/ice/base: log if DDP/FW do not support QinQ Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter Haiyue Wang
` (6 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Yuying Zhang, Qiming Yang
From: Yuying Zhang <yuying.zhang@intel.com>
[ upstream commit 0c0735ff4fc15e227631cbfe3fd31e33e42b34fc ]
Add the ethertype offset for QinQ switch rule dummy packet to
allow matching the corresponding field.
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/base/ice_switch.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 55bfc3e6c5..887b35ac47 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -1205,6 +1205,7 @@ static const u8 dummy_ipv6_l2tpv3_pkt[] = {
static const struct ice_dummy_pkt_offsets dummy_qinq_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_IPV4_OFOS, 22 },
@@ -1215,7 +1216,8 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
- 0x91, 0x00,
+
+ 0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
0x00, 0x00, 0x08, 0x00, /* ICE_VLAN_OFOS 18 */
@@ -1234,6 +1236,7 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
static const struct ice_dummy_pkt_offsets dummy_qinq_ipv6_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_IPV6_OFOS, 22 },
@@ -1244,7 +1247,8 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
- 0x91, 0x00,
+
+ 0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
0x00, 0x00, 0x86, 0xDD, /* ICE_VLAN_OFOS 18 */
@@ -1271,6 +1275,7 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
static const struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_PPPOE, 22 },
@@ -1280,6 +1285,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_offsets[] = {
static const
struct ice_dummy_pkt_offsets dummy_qinq_pppoe_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
+ { ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
{ ICE_VLAN_OFOS, 18 },
{ ICE_PPPOE, 22 },
@@ -1291,7 +1297,8 @@ static const u8 dummy_qinq_pppoe_ipv4_pkt[] = {
0x00, 0x00, 0x00, 0x00, /* ICE_MAC_OFOS 0 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
- 0x91, 0x00,
+
+ 0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_OFOS 18 */
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (11 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 12/18] net/ice/base: add ethertype offset for QinQ dummy packet Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection Haiyue Wang
` (5 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 0475c7770502cb4166b2577df3ff446af9d85515 ]
Since VLAN protocol type 'ICE_VLAN_OFOS' has been changed to map
the hardware VLAN protocol ID to 'ICE_VLAN_OF_HW (16)' when in Double
VLAN mode, and to 'ICE_VLAN_OL_HW (17)' when in Single VLAN mode.
So 'ICE_VLAN_OFOS' can't be used with 'ICE_VLAN_EX' which is outer VLAN
hardware protocol ID 'ICE_VLAN_OF_HW (16)' to do the QinQ VLAN pattern.
Introduce the new inner VLAN protocol type 'ICE_VLAN_IN', which is inner
VLAN hardware protocol ID 'ICE_VLAN_OL_HW (17)'.
Now for QinQ VLAN pattern, the protocol 'ICE_VLAN_EX' and 'ICE_VLAN_IN'
should be used to set the related protocol header fields like VLAN ID.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_protocol_type.h | 1 +
drivers/net/ice/base/ice_switch.c | 23 +++++++++++++----------
2 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ice/base/ice_protocol_type.h b/drivers/net/ice/base/ice_protocol_type.h
index e8caefd8f9..5dc795868e 100644
--- a/drivers/net/ice/base/ice_protocol_type.h
+++ b/drivers/net/ice/base/ice_protocol_type.h
@@ -53,6 +53,7 @@ enum ice_protocol_type {
ICE_NAT_T,
ICE_GTP_NO_PAY,
ICE_VLAN_EX,
+ ICE_VLAN_IN,
ICE_PROTOCOL_LAST
};
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 887b35ac47..9d8dc88844 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -1207,7 +1207,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_IPV4_OFOS, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1220,7 +1220,7 @@ static const u8 dummy_qinq_ipv4_pkt[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x08, 0x00, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x08, 0x00, /* ICE_VLAN_IN 18 */
0x45, 0x00, 0x00, 0x1c, /* ICE_IPV4_OFOS 22 */
0x00, 0x01, 0x00, 0x00,
@@ -1238,7 +1238,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_ipv6_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_IPV6_OFOS, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1251,7 +1251,7 @@ static const u8 dummy_qinq_ipv6_pkt[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x86, 0xDD, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x86, 0xDD, /* ICE_VLAN_IN 18 */
0x60, 0x00, 0x00, 0x00, /* ICE_IPV6_OFOS 22 */
0x00, 0x10, 0x11, 0x00, /* Next header UDP */
@@ -1277,7 +1277,7 @@ static const struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_PPPOE, 22 },
{ ICE_PROTOCOL_LAST, 0 },
};
@@ -1287,7 +1287,7 @@ struct ice_dummy_pkt_offsets dummy_qinq_pppoe_ipv4_packet_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14 },
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_PPPOE, 22 },
{ ICE_IPV4_OFOS, 30 },
{ ICE_PROTOCOL_LAST, 0 },
@@ -1301,14 +1301,14 @@ static const u8 dummy_qinq_pppoe_ipv4_pkt[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_IN 18 */
0x11, 0x00, 0x00, 0x00, /* ICE_PPPOE 22 */
0x00, 0x16,
0x00, 0x21, /* PPP Link Layer 28 */
- 0x45, 0x00, 0x00, 0x14, /* ICE_IPV4_IL 30 */
+ 0x45, 0x00, 0x00, 0x14, /* ICE_IPV4_OFOS 30 */
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
@@ -1322,7 +1322,7 @@ struct ice_dummy_pkt_offsets dummy_qinq_pppoe_packet_ipv6_offsets[] = {
{ ICE_MAC_OFOS, 0 },
{ ICE_ETYPE_OL, 12 },
{ ICE_VLAN_EX, 14},
- { ICE_VLAN_OFOS, 18 },
+ { ICE_VLAN_IN, 18 },
{ ICE_PPPOE, 22 },
{ ICE_IPV6_OFOS, 30 },
{ ICE_PROTOCOL_LAST, 0 },
@@ -1336,7 +1336,7 @@ static const u8 dummy_qinq_pppoe_ipv6_packet[] = {
0x91, 0x00, /* ICE_ETYPE_OL 12 */
0x00, 0x00, 0x81, 0x00, /* ICE_VLAN_EX 14 */
- 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_OFOS 18 */
+ 0x00, 0x00, 0x88, 0x64, /* ICE_VLAN_IN 18 */
0x11, 0x00, 0x00, 0x00, /* ICE_PPPOE 22 */
0x00, 0x2a,
@@ -6126,6 +6126,7 @@ static const struct ice_prot_ext_tbl_entry ice_prot_ext[ICE_PROTOCOL_LAST] = {
{ ICE_NAT_T, { 8, 10, 12, 14 } },
{ ICE_GTP_NO_PAY, { 8, 10, 12, 14 } },
{ ICE_VLAN_EX, { 0, 2 } },
+ { ICE_VLAN_IN, { 0, 2 } },
};
/* The following table describes preferred grouping of recipes.
@@ -6160,6 +6161,7 @@ static struct ice_protocol_entry ice_prot_id_tbl[ICE_PROTOCOL_LAST] = {
{ ICE_NAT_T, ICE_UDP_ILOS_HW },
{ ICE_GTP_NO_PAY, ICE_UDP_ILOS_HW },
{ ICE_VLAN_EX, ICE_VLAN_OF_HW },
+ { ICE_VLAN_IN, ICE_VLAN_OL_HW },
};
/**
@@ -7728,6 +7730,7 @@ ice_fill_adv_dummy_packet(struct ice_adv_lkup_elem *lkups, u16 lkups_cnt,
break;
case ICE_VLAN_OFOS:
case ICE_VLAN_EX:
+ case ICE_VLAN_IN:
len = sizeof(struct ice_vlan_hdr);
break;
case ICE_IPV4_OFOS:
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (12 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 15/18] net/ice: fix VLAN strip for double VLAN Haiyue Wang
` (4 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Yuying Zhang, Qiming Yang
From: Qi Zhang <qi.z.zhang@intel.com>
[ upstream commit 03697c24b7cafbd6c536204ba6470698fcf8c5e0 ]
The dummy packet should be QinQ PPPoE ipv6 when ppp protocol is ipv6.
Fixes: bb3386f348dd ("net/ice: enable QinQ filter for switch")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/base/ice_switch.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ice/base/ice_switch.c b/drivers/net/ice/base/ice_switch.c
index 9d8dc88844..d5576267b8 100644
--- a/drivers/net/ice/base/ice_switch.c
+++ b/drivers/net/ice/base/ice_switch.c
@@ -7403,6 +7403,11 @@ ice_find_dummy_packet(struct ice_adv_lkup_elem *lkups, u16 lkups_cnt,
*pkt_len = sizeof(dummy_qinq_pppoe_ipv4_pkt);
*offsets = dummy_qinq_pppoe_ipv4_packet_offsets;
return;
+ } else if (tun_type == ICE_SW_TUN_PPPOE_QINQ && ipv6) {
+ *pkt = dummy_qinq_pppoe_ipv6_packet;
+ *pkt_len = sizeof(dummy_qinq_pppoe_ipv6_packet);
+ *offsets = dummy_qinq_pppoe_packet_offsets;
+ return;
} else if (tun_type == ICE_SW_TUN_PPPOE_QINQ ||
tun_type == ICE_SW_TUN_PPPOE_PAY_QINQ) {
*pkt = dummy_qinq_pppoe_ipv4_pkt;
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 15/18] net/ice: fix VLAN strip for double VLAN
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (13 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 16/18] net/ice: fix VLAN 0 adding based on VLAN mode Haiyue Wang
` (3 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Qiming Yang
[ upstream commit 8ac4307504bed19ce68b39bc2703975ee0b9ab81 ]
VLAN strip was failing for double VLAN because of hardware
configuration, resulting mbuf not having the vlan_tci information.
Adjusted the strip setting according to current VLAN mode to fix the
VLAN strip.
Fixes: 14e7a4b37b4f ("net/ice/base: support configuring device in double VLAN mode")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
---
drivers/net/ice/ice_ethdev.c | 297 +++++++++++++++--------------------
1 file changed, 131 insertions(+), 166 deletions(-)
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 7f78cd36cd..9071bd5d4f 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -70,8 +70,6 @@ static struct proto_xtr_ol_flag ice_proto_xtr_ol_flag_params[] = {
.ol_flag = &rte_net_ice_dynflag_proto_xtr_ip_offset_mask },
};
-#define ICE_DFLT_OUTER_TAG_TYPE ICE_AQ_VSI_OUTER_TAG_VLAN_9100
-
#define ICE_OS_DEFAULT_PKG_NAME "ICE OS Default Package"
#define ICE_COMMS_PKG_NAME "ICE COMMS Package"
#define ICE_MAX_RES_DESC_NUM 1024
@@ -1119,127 +1117,6 @@ ice_remove_all_mac_vlan_filters(struct ice_vsi *vsi)
return ret;
}
-static int
-ice_vsi_config_qinq_insertion(struct ice_vsi *vsi, bool on)
-{
- struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
- struct ice_vsi_ctx ctxt;
- uint8_t qinq_flags;
- int ret = 0;
-
- /* Check if it has been already on or off */
- if (vsi->info.valid_sections &
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
- if (on) {
- if ((vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST) ==
- ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST)
- return 0; /* already on */
- } else {
- if (!(vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST))
- return 0; /* already off */
- }
- }
-
- if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST;
- else
- qinq_flags = 0;
- /* clear global insertion and use per packet insertion */
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_INSERT);
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_PORT_BASED_ACCEPT_HOST);
- vsi->info.outer_vlan_flags |= qinq_flags;
- /* use default vlan type 0x8100 */
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
- ICE_AQ_VSI_OUTER_TAG_TYPE_S;
- (void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
- ctxt.info.valid_sections =
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
- ctxt.vsi_num = vsi->vsi_id;
- ret = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
- if (ret) {
- PMD_DRV_LOG(INFO,
- "Update VSI failed to %s qinq stripping",
- on ? "enable" : "disable");
- return -EINVAL;
- }
-
- vsi->info.valid_sections |=
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
-
- return ret;
-}
-
-static int
-ice_vsi_config_qinq_stripping(struct ice_vsi *vsi, bool on)
-{
- struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
- struct ice_vsi_ctx ctxt;
- uint8_t qinq_flags;
- int ret = 0;
-
- /* Check if it has been already on or off */
- if (vsi->info.valid_sections &
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID)) {
- if (on) {
- if ((vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW)
- return 0; /* already on */
- } else {
- if ((vsi->info.outer_vlan_flags &
- ICE_AQ_VSI_OUTER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH)
- return 0; /* already off */
- }
- }
-
- if (on)
- qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW;
- else
- qinq_flags = ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH;
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_VLAN_EMODE_M);
- vsi->info.outer_vlan_flags |= qinq_flags;
- /* use default vlan type 0x8100 */
- vsi->info.outer_vlan_flags &= ~(ICE_AQ_VSI_OUTER_TAG_TYPE_M);
- vsi->info.outer_vlan_flags |= ICE_DFLT_OUTER_TAG_TYPE <<
- ICE_AQ_VSI_OUTER_TAG_TYPE_S;
- (void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
- ctxt.info.valid_sections =
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
- ctxt.vsi_num = vsi->vsi_id;
- ret = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
- if (ret) {
- PMD_DRV_LOG(INFO,
- "Update VSI failed to %s qinq stripping",
- on ? "enable" : "disable");
- return -EINVAL;
- }
-
- vsi->info.valid_sections |=
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
-
- return ret;
-}
-
-static int
-ice_vsi_config_double_vlan(struct ice_vsi *vsi, int on)
-{
- int ret;
-
- ret = ice_vsi_config_qinq_stripping(vsi, on);
- if (ret)
- PMD_DRV_LOG(ERR, "Fail to set qinq stripping - %d", ret);
-
- ret = ice_vsi_config_qinq_insertion(vsi, on);
- if (ret)
- PMD_DRV_LOG(ERR, "Fail to set qinq insertion - %d", ret);
-
- return ret;
-}
-
/* Enable IRQ0 */
static void
ice_pf_enable_irq0(struct ice_hw *hw)
@@ -2227,9 +2104,6 @@ ice_dev_init(struct rte_eth_dev *dev)
vsi = pf->main_vsi;
- /* Disable double vlan by default */
- ice_vsi_config_double_vlan(vsi, false);
-
ret = ice_aq_stop_lldp(hw, true, false, NULL);
if (ret != ICE_SUCCESS)
PMD_INIT_LOG(DEBUG, "lldp has already stopped\n");
@@ -4089,49 +3963,147 @@ ice_vsi_config_vlan_filter(struct ice_vsi *vsi, bool on)
return 0;
}
+/* Manage VLAN stripping for the VSI for Rx */
static int
-ice_vsi_config_vlan_stripping(struct ice_vsi *vsi, bool on)
+ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
{
struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
struct ice_vsi_ctx ctxt;
- uint8_t vlan_flags;
- int ret = 0;
+ enum ice_status status;
+ int err = 0;
- /* Check if it has been already on or off */
- if (vsi->info.valid_sections &
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID)) {
- if (on) {
- if ((vsi->info.inner_vlan_flags &
- ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH)
- return 0; /* already on */
- } else {
- if ((vsi->info.inner_vlan_flags &
- ICE_AQ_VSI_INNER_VLAN_EMODE_M) ==
- ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING)
- return 0; /* already off */
- }
- }
+ /* do not allow modifying VLAN stripping when a port VLAN is configured
+ * on this VSI
+ */
+ if (vsi->info.port_based_inner_vlan)
+ return 0;
- if (on)
- vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
+ memset(&ctxt, 0, sizeof(ctxt));
+
+ if (ena)
+ /* Strip VLAN tag from Rx packet and put it in the desc */
+ ctxt.info.inner_vlan_flags =
+ ICE_AQ_VSI_INNER_VLAN_EMODE_STR_BOTH;
else
- vlan_flags = ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
- vsi->info.inner_vlan_flags &= ~(ICE_AQ_VSI_INNER_VLAN_EMODE_M);
- vsi->info.inner_vlan_flags |= vlan_flags;
- (void)rte_memcpy(&ctxt.info, &vsi->info, sizeof(vsi->info));
+ /* Disable stripping. Leave tag in packet */
+ ctxt.info.inner_vlan_flags =
+ ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
+
+ /* Allow all packets untagged/tagged */
+ ctxt.info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_TX_MODE_ALL;
+
+ ctxt.info.valid_sections = rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
+
+ status = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
+ if (status) {
+ PMD_DRV_LOG(ERR, "Update VSI failed to %s vlan stripping",
+ ena ? "enable" : "disable");
+ err = -EIO;
+ } else {
+ vsi->info.inner_vlan_flags = ctxt.info.inner_vlan_flags;
+ }
+
+ return err;
+}
+
+static int
+ice_vsi_ena_inner_stripping(struct ice_vsi *vsi)
+{
+ return ice_vsi_manage_vlan_stripping(vsi, true);
+}
+
+static int
+ice_vsi_dis_inner_stripping(struct ice_vsi *vsi)
+{
+ return ice_vsi_manage_vlan_stripping(vsi, false);
+}
+
+static int ice_vsi_ena_outer_stripping(struct ice_vsi *vsi)
+{
+ struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+ struct ice_vsi_ctx ctxt;
+ enum ice_status status;
+ int err = 0;
+
+ /* do not allow modifying VLAN stripping when a port VLAN is configured
+ * on this VSI
+ */
+ if (vsi->info.port_based_outer_vlan)
+ return 0;
+
+ memset(&ctxt, 0, sizeof(ctxt));
+
ctxt.info.valid_sections =
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
- ctxt.vsi_num = vsi->vsi_id;
- ret = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
- if (ret) {
- PMD_DRV_LOG(INFO, "Update VSI failed to %s vlan stripping",
- on ? "enable" : "disable");
- return -EINVAL;
+ rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
+ /* clear current outer VLAN strip settings */
+ ctxt.info.outer_vlan_flags = vsi->info.outer_vlan_flags &
+ ~(ICE_AQ_VSI_OUTER_VLAN_EMODE_M | ICE_AQ_VSI_OUTER_TAG_TYPE_M);
+ ctxt.info.outer_vlan_flags |=
+ (ICE_AQ_VSI_OUTER_VLAN_EMODE_SHOW_BOTH <<
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_S) |
+ (ICE_AQ_VSI_OUTER_TAG_VLAN_8100 <<
+ ICE_AQ_VSI_OUTER_TAG_TYPE_S);
+
+ status = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
+ if (status) {
+ PMD_DRV_LOG(ERR, "Update VSI failed to enable outer VLAN stripping");
+ err = -EIO;
+ } else {
+ vsi->info.outer_vlan_flags = ctxt.info.outer_vlan_flags;
}
- vsi->info.valid_sections |=
- rte_cpu_to_le_16(ICE_AQ_VSI_PROP_VLAN_VALID);
+ return err;
+}
+
+static int
+ice_vsi_dis_outer_stripping(struct ice_vsi *vsi)
+{
+ struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+ struct ice_vsi_ctx ctxt;
+ enum ice_status status;
+ int err = 0;
+
+ if (vsi->info.port_based_outer_vlan)
+ return 0;
+
+ memset(&ctxt, 0, sizeof(ctxt));
+
+ ctxt.info.valid_sections =
+ rte_cpu_to_le_16(ICE_AQ_VSI_PROP_OUTER_TAG_VALID);
+ /* clear current outer VLAN strip settings */
+ ctxt.info.outer_vlan_flags = vsi->info.outer_vlan_flags &
+ ~ICE_AQ_VSI_OUTER_VLAN_EMODE_M;
+ ctxt.info.outer_vlan_flags |= ICE_AQ_VSI_OUTER_VLAN_EMODE_NOTHING <<
+ ICE_AQ_VSI_OUTER_VLAN_EMODE_S;
+
+ status = ice_update_vsi(hw, vsi->idx, &ctxt, NULL);
+ if (status) {
+ PMD_DRV_LOG(ERR, "Update VSI failed to disable outer VLAN stripping");
+ err = -EIO;
+ } else {
+ vsi->info.outer_vlan_flags = ctxt.info.outer_vlan_flags;
+ }
+
+ return err;
+}
+
+static int
+ice_vsi_config_vlan_stripping(struct ice_vsi *vsi, bool ena)
+{
+ struct ice_hw *hw = ICE_VSI_TO_HW(vsi);
+ int ret;
+
+ if (ice_is_dvm_ena(hw)) {
+ if (ena)
+ ret = ice_vsi_ena_outer_stripping(vsi);
+ else
+ ret = ice_vsi_dis_outer_stripping(vsi);
+ } else {
+ if (ena)
+ ret = ice_vsi_ena_inner_stripping(vsi);
+ else
+ ret = ice_vsi_dis_inner_stripping(vsi);
+ }
return ret;
}
@@ -4158,13 +4130,6 @@ ice_vlan_offload_set(struct rte_eth_dev *dev, int mask)
ice_vsi_config_vlan_stripping(vsi, false);
}
- if (mask & ETH_VLAN_EXTEND_MASK) {
- if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)
- ice_vsi_config_double_vlan(vsi, true);
- else
- ice_vsi_config_double_vlan(vsi, false);
- }
-
return 0;
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 16/18] net/ice: fix VLAN 0 adding based on VLAN mode
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (14 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 15/18] net/ice: fix VLAN strip for double VLAN Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 17/18] net/ice: enable QinQ filter for switch Haiyue Wang
` (2 subsequent siblings)
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Qiming Yang
[ upstream commit 295b34f55b001bceb27d9177b55326ccda49351b ]
In Single VLAN Mode, single VLAN filters via ICE_SW_LKUP_VLAN are based
on the inner VLAN ID, so the VLAN TPID (i.e. 0x8100 or 0x888a8) doesn't
matter.
In Double VLAN Mode, outer/single VLAN filters via ICE_SW_LKUP_VLAN are
based on the outer/single VLAN ID + VLAN TPID.
For both modes, adding a VLAN 0 + no VLAN TPID filter to handle untagged
traffic when VLAN pruning is enabled. Also, this handles VLAN 0 priority
tagged traffic in Single VLAN Mode, since the VLAN TPID is not part of
filtering.
If Double VLAN Mode is enabled then an explicit VLAN 0 + VLAN TPID filter
needs to be added to allow VLAN 0 priority tagged traffic in DVM, since
the VLAN TPID is part of filtering.
Fixes: 14e7a4b37b4f ("net/ice/base: support configuring device in double VLAN mode")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/ice_ethdev.c | 136 +++++++++++++++++++++++++++++------
drivers/net/ice/ice_ethdev.h | 10 ++-
2 files changed, 123 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
index 9071bd5d4f..5a1e775718 100644
--- a/drivers/net/ice/ice_ethdev.c
+++ b/drivers/net/ice/ice_ethdev.c
@@ -944,12 +944,13 @@ ice_remove_mac_filter(struct ice_vsi *vsi, struct rte_ether_addr *mac_addr)
/* Find out specific VLAN filter */
static struct ice_vlan_filter *
-ice_find_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
+ice_find_vlan_filter(struct ice_vsi *vsi, struct ice_vlan *vlan)
{
struct ice_vlan_filter *f;
TAILQ_FOREACH(f, &vsi->vlan_list, next) {
- if (vlan_id == f->vlan_info.vlan_id)
+ if (vlan->tpid == f->vlan_info.vlan.tpid &&
+ vlan->vid == f->vlan_info.vlan.vid)
return f;
}
@@ -957,7 +958,7 @@ ice_find_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
}
static int
-ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
+ice_add_vlan_filter(struct ice_vsi *vsi, struct ice_vlan *vlan)
{
struct ice_fltr_list_entry *v_list_itr = NULL;
struct ice_vlan_filter *f;
@@ -965,13 +966,13 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
struct ice_hw *hw;
int ret = 0;
- if (!vsi || vlan_id > RTE_ETHER_MAX_VLAN_ID)
+ if (!vsi || vlan->vid > RTE_ETHER_MAX_VLAN_ID)
return -EINVAL;
hw = ICE_VSI_TO_HW(vsi);
/* If it's added and configured, return. */
- f = ice_find_vlan_filter(vsi, vlan_id);
+ f = ice_find_vlan_filter(vsi, vlan);
if (f) {
PMD_DRV_LOG(INFO, "This VLAN filter already exists.");
return 0;
@@ -988,7 +989,9 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
ret = -ENOMEM;
goto DONE;
}
- v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan_id;
+ v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan->vid;
+ v_list_itr->fltr_info.l_data.vlan.tpid = vlan->tpid;
+ v_list_itr->fltr_info.l_data.vlan.tpid_valid = true;
v_list_itr->fltr_info.src_id = ICE_SRC_ID_VSI;
v_list_itr->fltr_info.fltr_act = ICE_FWD_TO_VSI;
v_list_itr->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
@@ -1012,7 +1015,8 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
ret = -ENOMEM;
goto DONE;
}
- f->vlan_info.vlan_id = vlan_id;
+ f->vlan_info.vlan.tpid = vlan->tpid;
+ f->vlan_info.vlan.vid = vlan->vid;
TAILQ_INSERT_TAIL(&vsi->vlan_list, f, next);
vsi->vlan_num++;
@@ -1024,7 +1028,7 @@ ice_add_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
}
static int
-ice_remove_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
+ice_remove_vlan_filter(struct ice_vsi *vsi, struct ice_vlan *vlan)
{
struct ice_fltr_list_entry *v_list_itr = NULL;
struct ice_vlan_filter *f;
@@ -1032,17 +1036,13 @@ ice_remove_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
struct ice_hw *hw;
int ret = 0;
- /**
- * Vlan 0 is the generic filter for untagged packets
- * and can't be removed.
- */
- if (!vsi || vlan_id == 0 || vlan_id > RTE_ETHER_MAX_VLAN_ID)
+ if (!vsi || vlan->vid > RTE_ETHER_MAX_VLAN_ID)
return -EINVAL;
hw = ICE_VSI_TO_HW(vsi);
/* Can't find it, return an error */
- f = ice_find_vlan_filter(vsi, vlan_id);
+ f = ice_find_vlan_filter(vsi, vlan);
if (!f)
return -EINVAL;
@@ -1055,7 +1055,9 @@ ice_remove_vlan_filter(struct ice_vsi *vsi, uint16_t vlan_id)
goto DONE;
}
- v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan_id;
+ v_list_itr->fltr_info.l_data.vlan.vlan_id = vlan->vid;
+ v_list_itr->fltr_info.l_data.vlan.tpid = vlan->tpid;
+ v_list_itr->fltr_info.l_data.vlan.tpid_valid = true;
v_list_itr->fltr_info.src_id = ICE_SRC_ID_VSI;
v_list_itr->fltr_info.fltr_act = ICE_FWD_TO_VSI;
v_list_itr->fltr_info.lkup_type = ICE_SW_LKUP_VLAN;
@@ -1106,7 +1108,7 @@ ice_remove_all_mac_vlan_filters(struct ice_vsi *vsi)
return 0;
TAILQ_FOREACH_SAFE(v_f, &vsi->vlan_list, next, temp) {
- ret = ice_remove_vlan_filter(vsi, v_f->vlan_info.vlan_id);
+ ret = ice_remove_vlan_filter(vsi, &v_f->vlan_info.vlan);
if (ret != ICE_SUCCESS) {
ret = -EINVAL;
goto DONE;
@@ -1463,6 +1465,16 @@ ice_setup_vsi(struct ice_pf *pf, enum ice_vsi_type type)
vsi_ctx.info.inner_vlan_flags |= ICE_AQ_VSI_INNER_VLAN_EMODE_NOTHING;
vsi_ctx.info.q_opt_rss = ICE_AQ_VSI_Q_OPT_RSS_LUT_PF |
ICE_AQ_VSI_Q_OPT_RSS_TPLZ;
+ if (ice_is_dvm_ena(hw)) {
+ vsi_ctx.info.outer_vlan_flags =
+ (ICE_AQ_VSI_OUTER_VLAN_TX_MODE_ALL <<
+ ICE_AQ_VSI_OUTER_VLAN_TX_MODE_S) &
+ ICE_AQ_VSI_OUTER_VLAN_TX_MODE_M;
+ vsi_ctx.info.outer_vlan_flags |=
+ (ICE_AQ_VSI_OUTER_TAG_VLAN_8100 <<
+ ICE_AQ_VSI_OUTER_TAG_TYPE_S) &
+ ICE_AQ_VSI_OUTER_TAG_TYPE_M;
+ }
/* FDIR */
cfg = ICE_AQ_VSI_PROP_SECURITY_VALID |
@@ -1696,10 +1708,11 @@ ice_load_pkg_type(struct ice_hw *hw)
else
package_type = ICE_PKG_TYPE_UNKNOWN;
- PMD_INIT_LOG(NOTICE, "Active package is: %d.%d.%d.%d, %s",
+ PMD_INIT_LOG(NOTICE, "Active package is: %d.%d.%d.%d, %s (%s VLAN mode)",
hw->active_pkg_ver.major, hw->active_pkg_ver.minor,
hw->active_pkg_ver.update, hw->active_pkg_ver.draft,
- hw->active_pkg_name);
+ hw->active_pkg_name,
+ ice_is_dvm_ena(hw) ? "double" : "single");
return package_type;
}
@@ -3898,19 +3911,27 @@ static int
ice_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct ice_pf *pf = ICE_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+ struct ice_vlan vlan = ICE_VLAN(RTE_ETHER_TYPE_VLAN, vlan_id);
struct ice_vsi *vsi = pf->main_vsi;
int ret;
PMD_INIT_FUNC_TRACE();
+ /**
+ * Vlan 0 is the generic filter for untagged packets
+ * and can't be removed or added by user.
+ */
+ if (vlan_id == 0)
+ return 0;
+
if (on) {
- ret = ice_add_vlan_filter(vsi, vlan_id);
+ ret = ice_add_vlan_filter(vsi, &vlan);
if (ret < 0) {
PMD_DRV_LOG(ERR, "Failed to add vlan filter");
return -EINVAL;
}
} else {
- ret = ice_remove_vlan_filter(vsi, vlan_id);
+ ret = ice_remove_vlan_filter(vsi, &vlan);
if (ret < 0) {
PMD_DRV_LOG(ERR, "Failed to remove vlan filter");
return -EINVAL;
@@ -3920,6 +3941,77 @@ ice_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
return 0;
}
+/* In Single VLAN Mode (SVM), single VLAN filters via ICE_SW_LKUP_VLAN are
+ * based on the inner VLAN ID, so the VLAN TPID (i.e. 0x8100 or 0x888a8)
+ * doesn't matter. In Double VLAN Mode (DVM), outer/single VLAN filters via
+ * ICE_SW_LKUP_VLAN are based on the outer/single VLAN ID + VLAN TPID.
+ *
+ * For both modes add a VLAN 0 + no VLAN TPID filter to handle untagged traffic
+ * when VLAN pruning is enabled. Also, this handles VLAN 0 priority tagged
+ * traffic in SVM, since the VLAN TPID isn't part of filtering.
+ *
+ * If DVM is enabled then an explicit VLAN 0 + VLAN TPID filter needs to be
+ * added to allow VLAN 0 priority tagged traffic in DVM, since the VLAN TPID is
+ * part of filtering.
+ */
+static int
+ice_vsi_add_vlan_zero(struct ice_vsi *vsi)
+{
+ struct ice_vlan vlan;
+ int err;
+
+ vlan = ICE_VLAN(0, 0);
+ err = ice_add_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to add VLAN ID 0");
+ return err;
+ }
+
+ /* in SVM both VLAN 0 filters are identical */
+ if (!ice_is_dvm_ena(&vsi->adapter->hw))
+ return 0;
+
+ vlan = ICE_VLAN(RTE_ETHER_TYPE_VLAN, 0);
+ err = ice_add_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to add VLAN ID 0 in double VLAN mode");
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * Delete the VLAN 0 filters in the same manner that they were added in
+ * ice_vsi_add_vlan_zero.
+ */
+static int
+ice_vsi_del_vlan_zero(struct ice_vsi *vsi)
+{
+ struct ice_vlan vlan;
+ int err;
+
+ vlan = ICE_VLAN(0, 0);
+ err = ice_remove_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to remove VLAN ID 0");
+ return err;
+ }
+
+ /* in SVM both VLAN 0 filters are identical */
+ if (!ice_is_dvm_ena(&vsi->adapter->hw))
+ return 0;
+
+ vlan = ICE_VLAN(RTE_ETHER_TYPE_VLAN, 0);
+ err = ice_remove_vlan_filter(vsi, &vlan);
+ if (err) {
+ PMD_DRV_LOG(DEBUG, "Failed to remove VLAN ID 0 in double VLAN mode");
+ return err;
+ }
+
+ return 0;
+}
+
/* Configure vlan filter on or off */
static int
ice_vsi_config_vlan_filter(struct ice_vsi *vsi, bool on)
@@ -3956,9 +4048,9 @@ ice_vsi_config_vlan_filter(struct ice_vsi *vsi, bool on)
/* consist with other drivers, allow untagged packet when vlan filter on */
if (on)
- ret = ice_add_vlan_filter(vsi, 0);
+ ret = ice_vsi_add_vlan_zero(vsi);
else
- ret = ice_remove_vlan_filter(vsi, 0);
+ ret = ice_vsi_del_vlan_zero(vsi);
return 0;
}
diff --git a/drivers/net/ice/ice_ethdev.h b/drivers/net/ice/ice_ethdev.h
index 2b03c59671..f96625f43a 100644
--- a/drivers/net/ice/ice_ethdev.h
+++ b/drivers/net/ice/ice_ethdev.h
@@ -167,11 +167,19 @@ struct ice_mac_filter {
struct ice_mac_filter_info mac_info;
};
+struct ice_vlan {
+ uint16_t tpid;
+ uint16_t vid;
+};
+
+#define ICE_VLAN(tpid, vid) \
+ ((struct ice_vlan){ tpid, vid })
+
/**
* VLAN filter structure
*/
struct ice_vlan_filter_info {
- uint16_t vlan_id;
+ struct ice_vlan vlan;
};
TAILQ_HEAD(ice_vlan_filter_list, ice_vlan_filter);
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 17/18] net/ice: enable QinQ filter for switch
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (15 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 16/18] net/ice: fix VLAN 0 adding based on VLAN mode Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 18/18] net/ice: update QinQ switch filter handling Haiyue Wang
2021-06-16 15:47 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Luca Boccassi
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Junfeng Guo, Wei Zhao, Qiming Yang
From: Junfeng Guo <junfeng.guo@intel.com>
[ upstream commit bb3386f348ddf1a32b752ca371146e6be5c56a8b ]
Enable the double VLAN support for switch QinQ filtering.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/ice_generic_flow.c | 8 +++
drivers/net/ice/ice_generic_flow.h | 1 +
drivers/net/ice/ice_switch_filter.c | 106 +++++++++++++++++++++++++---
3 files changed, 104 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ice/ice_generic_flow.c b/drivers/net/ice/ice_generic_flow.c
index 1429cbc3b6..1712d3b2ef 100644
--- a/drivers/net/ice/ice_generic_flow.c
+++ b/drivers/net/ice/ice_generic_flow.c
@@ -1455,6 +1455,14 @@ enum rte_flow_item_type pattern_eth_qinq_pppoes[] = {
RTE_FLOW_ITEM_TYPE_PPPOES,
RTE_FLOW_ITEM_TYPE_END,
};
+enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[] = {
+ RTE_FLOW_ITEM_TYPE_ETH,
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_VLAN,
+ RTE_FLOW_ITEM_TYPE_PPPOES,
+ RTE_FLOW_ITEM_TYPE_PPPOE_PROTO_ID,
+ RTE_FLOW_ITEM_TYPE_END,
+};
enum rte_flow_item_type pattern_eth_pppoes_ipv4[] = {
RTE_FLOW_ITEM_TYPE_ETH,
RTE_FLOW_ITEM_TYPE_PPPOES,
diff --git a/drivers/net/ice/ice_generic_flow.h b/drivers/net/ice/ice_generic_flow.h
index 434d2f425d..dc45d8dc61 100644
--- a/drivers/net/ice/ice_generic_flow.h
+++ b/drivers/net/ice/ice_generic_flow.h
@@ -426,6 +426,7 @@ extern enum rte_flow_item_type pattern_eth_pppoes_proto[];
extern enum rte_flow_item_type pattern_eth_vlan_pppoes[];
extern enum rte_flow_item_type pattern_eth_vlan_pppoes_proto[];
extern enum rte_flow_item_type pattern_eth_qinq_pppoes[];
+extern enum rte_flow_item_type pattern_eth_qinq_pppoes_proto[];
extern enum rte_flow_item_type pattern_eth_pppoes_ipv4[];
extern enum rte_flow_item_type pattern_eth_vlan_pppoes_ipv4[];
extern enum rte_flow_item_type pattern_eth_qinq_pppoes_ipv4[];
diff --git a/drivers/net/ice/ice_switch_filter.c b/drivers/net/ice/ice_switch_filter.c
index 8cba6eb7b1..6dfad48694 100644
--- a/drivers/net/ice/ice_switch_filter.c
+++ b/drivers/net/ice/ice_switch_filter.c
@@ -35,11 +35,15 @@
#define ICE_SW_INSET_ETHER ( \
ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE)
#define ICE_SW_INSET_MAC_VLAN ( \
- ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE | \
- ICE_INSET_VLAN_OUTER)
+ ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE | \
+ ICE_INSET_VLAN_INNER)
+#define ICE_SW_INSET_MAC_QINQ ( \
+ ICE_SW_INSET_MAC_VLAN | ICE_INSET_VLAN_OUTER)
#define ICE_SW_INSET_MAC_IPV4 ( \
ICE_INSET_DMAC | ICE_INSET_IPV4_DST | ICE_INSET_IPV4_SRC | \
ICE_INSET_IPV4_PROTO | ICE_INSET_IPV4_TTL | ICE_INSET_IPV4_TOS)
+#define ICE_SW_INSET_MAC_QINQ_IPV4 ( \
+ ICE_SW_INSET_MAC_QINQ | ICE_SW_INSET_MAC_IPV4)
#define ICE_SW_INSET_MAC_IPV4_TCP ( \
ICE_INSET_DMAC | ICE_INSET_IPV4_DST | ICE_INSET_IPV4_SRC | \
ICE_INSET_IPV4_TTL | ICE_INSET_IPV4_TOS | \
@@ -52,6 +56,8 @@
ICE_INSET_DMAC | ICE_INSET_IPV6_DST | ICE_INSET_IPV6_SRC | \
ICE_INSET_IPV6_TC | ICE_INSET_IPV6_HOP_LIMIT | \
ICE_INSET_IPV6_NEXT_HDR)
+#define ICE_SW_INSET_MAC_QINQ_IPV6 ( \
+ ICE_SW_INSET_MAC_QINQ | ICE_SW_INSET_MAC_IPV6)
#define ICE_SW_INSET_MAC_IPV6_TCP ( \
ICE_INSET_DMAC | ICE_INSET_IPV6_DST | ICE_INSET_IPV6_SRC | \
ICE_INSET_IPV6_HOP_LIMIT | ICE_INSET_IPV6_TC | \
@@ -148,6 +154,8 @@ ice_pattern_match_item ice_switch_pattern_dist_os[] = {
ICE_SW_INSET_ETHER, ICE_INSET_NONE},
{pattern_ethertype_vlan,
ICE_SW_INSET_MAC_VLAN, ICE_INSET_NONE},
+ {pattern_ethertype_qinq,
+ ICE_SW_INSET_MAC_QINQ, ICE_INSET_NONE},
{pattern_eth_arp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4,
@@ -182,6 +190,8 @@ ice_pattern_match_item ice_switch_pattern_dist_comms[] = {
ICE_SW_INSET_ETHER, ICE_INSET_NONE},
{pattern_ethertype_vlan,
ICE_SW_INSET_MAC_VLAN, ICE_INSET_NONE},
+ {pattern_ethertype_qinq,
+ ICE_SW_INSET_MAC_QINQ, ICE_INSET_NONE},
{pattern_eth_arp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4,
@@ -262,6 +272,18 @@ ice_pattern_match_item ice_switch_pattern_dist_comms[] = {
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_pfcp,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv4,
+ ICE_SW_INSET_MAC_QINQ_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv6,
+ ICE_SW_INSET_MAC_QINQ_IPV6, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes,
+ ICE_SW_INSET_MAC_PPPOE, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_proto,
+ ICE_SW_INSET_MAC_PPPOE_PROTO, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv4,
+ ICE_SW_INSET_MAC_PPPOE_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv6,
+ ICE_SW_INSET_MAC_PPPOE_IPV6, ICE_INSET_NONE},
};
static struct
@@ -304,6 +326,8 @@ ice_pattern_match_item ice_switch_pattern_perm_comms[] = {
ICE_SW_INSET_ETHER, ICE_INSET_NONE},
{pattern_ethertype_vlan,
ICE_SW_INSET_MAC_VLAN, ICE_INSET_NONE},
+ {pattern_ethertype_qinq,
+ ICE_SW_INSET_MAC_QINQ, ICE_INSET_NONE},
{pattern_eth_arp,
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv4,
@@ -384,6 +408,18 @@ ice_pattern_match_item ice_switch_pattern_perm_comms[] = {
ICE_INSET_NONE, ICE_INSET_NONE},
{pattern_eth_ipv6_pfcp,
ICE_INSET_NONE, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv4,
+ ICE_SW_INSET_MAC_QINQ_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_ipv6,
+ ICE_SW_INSET_MAC_QINQ_IPV6, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes,
+ ICE_SW_INSET_MAC_PPPOE, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_proto,
+ ICE_SW_INSET_MAC_PPPOE_PROTO, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv4,
+ ICE_SW_INSET_MAC_PPPOE_IPV4, ICE_INSET_NONE},
+ {pattern_eth_qinq_pppoes_ipv6,
+ ICE_SW_INSET_MAC_PPPOE_IPV6, ICE_INSET_NONE},
};
static int
@@ -516,6 +552,8 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
bool pppoe_elem_valid = 0;
bool pppoe_patt_valid = 0;
bool pppoe_prot_valid = 0;
+ bool inner_vlan_valid = 0;
+ bool outer_vlan_valid = 0;
bool tunnel_valid = 0;
bool profile_rule = 0;
bool nvgre_valid = 0;
@@ -1062,23 +1100,40 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
"Invalid VLAN item");
return 0;
}
+
+ if (!outer_vlan_valid &&
+ (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
+ *tun_type == ICE_NON_TUN_QINQ))
+ outer_vlan_valid = 1;
+ else if (!inner_vlan_valid &&
+ (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
+ *tun_type == ICE_NON_TUN_QINQ))
+ inner_vlan_valid = 1;
+ else if (!inner_vlan_valid)
+ inner_vlan_valid = 1;
+
if (vlan_spec && vlan_mask) {
- list[t].type = ICE_VLAN_OFOS;
+ if (outer_vlan_valid && !inner_vlan_valid) {
+ list[t].type = ICE_VLAN_EX;
+ input_set |= ICE_INSET_VLAN_OUTER;
+ } else if (inner_vlan_valid) {
+ list[t].type = ICE_VLAN_OFOS;
+ input_set |= ICE_INSET_VLAN_INNER;
+ }
+
if (vlan_mask->tci) {
list[t].h_u.vlan_hdr.vlan =
vlan_spec->tci;
list[t].m_u.vlan_hdr.vlan =
vlan_mask->tci;
- input_set |= ICE_INSET_VLAN_OUTER;
input_set_byte += 2;
}
if (vlan_mask->inner_type) {
- list[t].h_u.vlan_hdr.type =
- vlan_spec->inner_type;
- list[t].m_u.vlan_hdr.type =
- vlan_mask->inner_type;
- input_set |= ICE_INSET_ETHERTYPE;
- input_set_byte += 2;
+ rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ITEM,
+ item,
+ "Invalid VLAN input set.");
+ return 0;
}
t++;
}
@@ -1380,8 +1435,27 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
}
}
+ if (*tun_type == ICE_SW_TUN_PPPOE_PAY &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_PAY_QINQ;
+ else if (*tun_type == ICE_SW_TUN_PPPOE &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_QINQ;
+ else if (*tun_type == ICE_NON_TUN &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_NON_TUN_QINQ;
+ else if (*tun_type == ICE_SW_TUN_AND_NON_TUN &&
+ inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_AND_NON_TUN_QINQ;
+
if (pppoe_patt_valid && !pppoe_prot_valid) {
- if (ipv6_valid && udp_valid)
+ if (inner_vlan_valid && outer_vlan_valid && ipv4_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_IPV4_QINQ;
+ else if (inner_vlan_valid && outer_vlan_valid && ipv6_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_IPV6_QINQ;
+ else if (inner_vlan_valid && outer_vlan_valid)
+ *tun_type = ICE_SW_TUN_PPPOE_QINQ;
+ else if (ipv6_valid && udp_valid)
*tun_type = ICE_SW_TUN_PPPOE_IPV6_UDP;
else if (ipv6_valid && tcp_valid)
*tun_type = ICE_SW_TUN_PPPOE_IPV6_TCP;
@@ -1659,6 +1733,7 @@ ice_switch_parse_pattern_action(struct ice_adapter *ad,
uint16_t lkups_num = 0;
const struct rte_flow_item *item = pattern;
uint16_t item_num = 0;
+ uint16_t vlan_num = 0;
enum ice_sw_tunnel_type tun_type =
ICE_NON_TUN;
struct ice_pattern_match_item *pattern_match_item = NULL;
@@ -1674,6 +1749,10 @@ ice_switch_parse_pattern_action(struct ice_adapter *ad,
if (eth_mask->type == UINT16_MAX)
tun_type = ICE_SW_TUN_AND_NON_TUN;
}
+
+ if (item->type == RTE_FLOW_ITEM_TYPE_VLAN)
+ vlan_num++;
+
/* reserve one more memory slot for ETH which may
* consume 2 lookup items.
*/
@@ -1681,6 +1760,11 @@ ice_switch_parse_pattern_action(struct ice_adapter *ad,
item_num++;
}
+ if (vlan_num == 2 && tun_type == ICE_SW_TUN_AND_NON_TUN)
+ tun_type = ICE_SW_TUN_AND_NON_TUN_QINQ;
+ else if (vlan_num == 2)
+ tun_type = ICE_NON_TUN_QINQ;
+
list = rte_zmalloc(NULL, item_num * sizeof(*list), 0);
if (!list) {
rte_flow_error_set(error, EINVAL,
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* [dpdk-stable] [PATCH 20.11 v2 18/18] net/ice: update QinQ switch filter handling
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (16 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 17/18] net/ice: enable QinQ filter for switch Haiyue Wang
@ 2021-06-11 7:15 ` Haiyue Wang
2021-06-16 15:47 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Luca Boccassi
18 siblings, 0 replies; 53+ messages in thread
From: Haiyue Wang @ 2021-06-11 7:15 UTC (permalink / raw)
To: stable
Cc: bluca, xuemingl, thomas, christian.ehrhardt, ktraynor,
qi.z.zhang, haiyue.wang, Qiming Yang
[ upstream commit 23ea199b732bf54861aaea49e52c1089334b29ae ]
The hardware outer/inner VLAN protocol types are now updated to map to
new interface VLAN protocol types, so update the application to use new
VLAN protocol types when the rte_flow is QinQ filter type.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
---
drivers/net/ice/ice_switch_filter.c | 36 ++++++++++++++++++-----------
1 file changed, 22 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ice/ice_switch_filter.c b/drivers/net/ice/ice_switch_filter.c
index 6dfad48694..a66b6ff7e2 100644
--- a/drivers/net/ice/ice_switch_filter.c
+++ b/drivers/net/ice/ice_switch_filter.c
@@ -558,12 +558,17 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
bool profile_rule = 0;
bool nvgre_valid = 0;
bool vxlan_valid = 0;
+ bool qinq_valid = 0;
bool ipv6_valid = 0;
bool ipv4_valid = 0;
bool udp_valid = 0;
bool tcp_valid = 0;
uint16_t j, t = 0;
+ if (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
+ *tun_type == ICE_NON_TUN_QINQ)
+ qinq_valid = 1;
+
for (item = pattern; item->type !=
RTE_FLOW_ITEM_TYPE_END; item++) {
if (item->last) {
@@ -1101,22 +1106,25 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
return 0;
}
- if (!outer_vlan_valid &&
- (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
- *tun_type == ICE_NON_TUN_QINQ))
- outer_vlan_valid = 1;
- else if (!inner_vlan_valid &&
- (*tun_type == ICE_SW_TUN_AND_NON_TUN_QINQ ||
- *tun_type == ICE_NON_TUN_QINQ))
- inner_vlan_valid = 1;
- else if (!inner_vlan_valid)
- inner_vlan_valid = 1;
+ if (qinq_valid) {
+ if (!outer_vlan_valid)
+ outer_vlan_valid = 1;
+ else
+ inner_vlan_valid = 1;
+ }
if (vlan_spec && vlan_mask) {
- if (outer_vlan_valid && !inner_vlan_valid) {
- list[t].type = ICE_VLAN_EX;
- input_set |= ICE_INSET_VLAN_OUTER;
- } else if (inner_vlan_valid) {
+ if (qinq_valid) {
+ if (!inner_vlan_valid) {
+ list[t].type = ICE_VLAN_EX;
+ input_set |=
+ ICE_INSET_VLAN_OUTER;
+ } else {
+ list[t].type = ICE_VLAN_IN;
+ input_set |=
+ ICE_INSET_VLAN_INNER;
+ }
+ } else {
list[t].type = ICE_VLAN_OFOS;
input_set |= ICE_INSET_VLAN_INNER;
}
--
2.32.0
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
` (17 preceding siblings ...)
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 18/18] net/ice: update QinQ switch filter handling Haiyue Wang
@ 2021-06-16 15:47 ` Luca Boccassi
2021-06-17 1:16 ` Wang, Haiyue
18 siblings, 1 reply; 53+ messages in thread
From: Luca Boccassi @ 2021-06-16 15:47 UTC (permalink / raw)
To: Haiyue Wang, stable
Cc: xuemingl, thomas, christian.ehrhardt, ktraynor, qi.z.zhang
On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN offload,
> which can only handle single VLAN mode for firmware limitation. Now the
> firmware is updated to support double VLAN mode and single VLAN mode at
> the same time. It depends on the driver to do selection at the boot time.
>
> As VLAN protocol handling like strip, filter, flow is very common use, we
> request to support the ice PMD can run on the latest firmware for enabling
> the new design. This is compatible backport as the main tree.
>
> v2: Fix the subject fix with messy code like : PATCHÂ
>
> Haiyue Wang (4):
> net/ice/base: do not set VLAN mode in DCF mode
> net/ice: fix VLAN strip for double VLAN
> net/ice: fix VLAN 0 adding based on VLAN mode
> net/ice: update QinQ switch filter handling
>
> Junfeng Guo (1):
> net/ice: enable QinQ filter for switch
>
> Qi Zhang (12):
> net/ice/base: align add VSI and update VSI AQ command buffer
> net/ice/base: add interface to support configuring VLAN mode
> net/ice/base: fix outer VLAN related macro
> net/ice/base: add VLAN TPID for VLAN filters
> net/ice/base: support checking double VLAN mode
> net/ice/base: support configuring device in double VLAN mode
> net/ice/base: update boost TCAM for DVM
> net/ice/base: change protocol ID for VLAN in DVM
> net/ice/base: refactor post DDP download VLAN mode config
> net/ice/base: log if DDP/FW do not support QinQ
> net/ice/base: add inner VLAN protocol type for QinQ filter
> net/ice/base: fix QinQ PPPoE dummy packet selection
>
> Yuying Zhang (1):
> net/ice/base: add ethertype offset for QinQ dummy packet
>
> drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> drivers/net/ice/base/ice_bitops.h | 45 +++
> drivers/net/ice/base/ice_common.c | 38 ++
> drivers/net/ice/base/ice_common.h | 4 +
> drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> drivers/net/ice/base/ice_flex_pipe.h | 12 +
> drivers/net/ice/base/ice_flex_type.h | 39 ++
> drivers/net/ice/base/ice_protocol_type.h | 1 +
> drivers/net/ice/base/ice_switch.c | 124 +++++-
> drivers/net/ice/base/ice_switch.h | 15 +
> drivers/net/ice/base/ice_type.h | 4 +
> drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> drivers/net/ice/base/ice_vlan_mode.h | 16 +
> drivers/net/ice/base/meson.build | 1 +
> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> drivers/net/ice/ice_ethdev.h | 10 +-
> drivers/net/ice/ice_generic_flow.c | 8 +
> drivers/net/ice/ice_generic_flow.h | 1 +
> drivers/net/ice/ice_switch_filter.c | 114 +++++-
> 19 files changed, 1545 insertions(+), 363 deletions(-)
> create mode 100644 drivers/net/ice/base/ice_vlan_mode.c
> create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
Hi,
At 1.9k diffstat, this series is quite large. Given it's a new feature,
rather than a series of bug fixes, this would seem a bit risky to me.
Final word of course belongs to Xueming, since he's managing this one.
See:
https://doc.dpdk.org/guides/contributing/stable.html#what-changes-should-be-backported
--
Kind regards,
Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-16 15:47 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Luca Boccassi
@ 2021-06-17 1:16 ` Wang, Haiyue
2021-06-17 8:53 ` Xueming(Steven) Li
0 siblings, 1 reply; 53+ messages in thread
From: Wang, Haiyue @ 2021-06-17 1:16 UTC (permalink / raw)
To: Luca Boccassi, stable
Cc: xuemingl, thomas, christian.ehrhardt, ktraynor, Zhang, Qi Z
> -----Original Message-----
> From: Luca Boccassi <bluca@debian.org>
> Sent: Wednesday, June 16, 2021 23:47
> To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
> Cc: xuemingl@nvidia.com; thomas@monjalon.net; christian.ehrhardt@canonical.com; ktraynor@redhat.com;
> Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> > When LTS 20.11 was released, the Intel ice PMD has a basic VLAN offload,
> > which can only handle single VLAN mode for firmware limitation. Now the
> > firmware is updated to support double VLAN mode and single VLAN mode at
> > the same time. It depends on the driver to do selection at the boot time.
> >
> > As VLAN protocol handling like strip, filter, flow is very common use, we
> > request to support the ice PMD can run on the latest firmware for enabling
> > the new design. This is compatible backport as the main tree.
> >
> > v2: Fix the subject fix with messy code like : PATCHÂ
> >
> > Haiyue Wang (4):
> > net/ice/base: do not set VLAN mode in DCF mode
> > net/ice: fix VLAN strip for double VLAN
> > net/ice: fix VLAN 0 adding based on VLAN mode
> > net/ice: update QinQ switch filter handling
> >
> > Junfeng Guo (1):
> > net/ice: enable QinQ filter for switch
> >
> > Qi Zhang (12):
> > net/ice/base: align add VSI and update VSI AQ command buffer
> > net/ice/base: add interface to support configuring VLAN mode
> > net/ice/base: fix outer VLAN related macro
> > net/ice/base: add VLAN TPID for VLAN filters
> > net/ice/base: support checking double VLAN mode
> > net/ice/base: support configuring device in double VLAN mode
> > net/ice/base: update boost TCAM for DVM
> > net/ice/base: change protocol ID for VLAN in DVM
> > net/ice/base: refactor post DDP download VLAN mode config
> > net/ice/base: log if DDP/FW do not support QinQ
> > net/ice/base: add inner VLAN protocol type for QinQ filter
> > net/ice/base: fix QinQ PPPoE dummy packet selection
> >
> > Yuying Zhang (1):
> > net/ice/base: add ethertype offset for QinQ dummy packet
> >
> > drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> > drivers/net/ice/base/ice_bitops.h | 45 +++
> > drivers/net/ice/base/ice_common.c | 38 ++
> > drivers/net/ice/base/ice_common.h | 4 +
> > drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> > drivers/net/ice/base/ice_flex_pipe.h | 12 +
> > drivers/net/ice/base/ice_flex_type.h | 39 ++
> > drivers/net/ice/base/ice_protocol_type.h | 1 +
> > drivers/net/ice/base/ice_switch.c | 124 +++++-
> > drivers/net/ice/base/ice_switch.h | 15 +
> > drivers/net/ice/base/ice_type.h | 4 +
> > drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> > drivers/net/ice/base/ice_vlan_mode.h | 16 +
> > drivers/net/ice/base/meson.build | 1 +
> > drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> > drivers/net/ice/ice_ethdev.h | 10 +-
> > drivers/net/ice/ice_generic_flow.c | 8 +
> > drivers/net/ice/ice_generic_flow.h | 1 +
> > drivers/net/ice/ice_switch_filter.c | 114 +++++-
> > 19 files changed, 1545 insertions(+), 363 deletions(-)
> > create mode 100644 drivers/net/ice/base/ice_vlan_mode.c
> > create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
>
> Hi,
>
> At 1.9k diffstat, this series is quite large. Given it's a new feature,
> rather than a series of bug fixes, this would seem a bit risky to me.
> Final word of course belongs to Xueming, since he's managing this one.
> See:
>
01. Does the feature break API/ABI?
NO.
02. Does the feature break backwards compatibility?
NO.
03. Is it for the latest LTS release (to avoid LTS upgrade issues)?
Yes.
04. Is there a commitment from the proposer or affiliation to validate the feature and check for regressions in related functionality?
Passed internally, if needed, an official Test-by can be provided.
05. Is there a track record of the proposer or affiliation validating stable releases?
Bugzilla ?
06. Is it obvious that the feature will not impact existing functionality?
Yes.
07. How intrusive is the code change?
From LOC, yes, 1.9K seems to be BIG, but DPDK PMD related is 588, other is
the share code in base (1320), which is tested and validated on other platform.
drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
drivers/net/ice/ice_ethdev.h | 10 +-
drivers/net/ice/ice_generic_flow.c | 8 +
drivers/net/ice/ice_generic_flow.h | 1 +
drivers/net/ice/ice_switch_filter.c | 114 +++++-
08. What is the scope of the code change?
PMD only.
09. Does it impact common components or vendor specific?
NO.
10. Is there a justifiable use case (a clear user need)?
Yes, for firmware updated. And we have the customer who wants to use the
VLAN feature on LTS 20.11.
11. Is there a community consensus about the backport?
...
> https://doc.dpdk.org/guides/contributing/stable.html#what-changes-should-be-backported
>
> --
> Kind regards,
> Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-17 1:16 ` Wang, Haiyue
@ 2021-06-17 8:53 ` Xueming(Steven) Li
2021-06-17 10:04 ` Kevin Traynor
2021-06-18 1:56 ` Wang, Haiyue
0 siblings, 2 replies; 53+ messages in thread
From: Xueming(Steven) Li @ 2021-06-17 8:53 UTC (permalink / raw)
To: Wang, Haiyue, Luca Boccassi, stable, Kevin Traynor
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, ktraynor, Zhang, Qi Z
Hi Haiyue,
> -----Original Message-----
> From: Wang, Haiyue <haiyue.wang@intel.com>
> Sent: Thursday, June 17, 2021 9:16 AM
> To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
> Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> > -----Original Message-----
> > From: Luca Boccassi <bluca@debian.org>
> > Sent: Wednesday, June 16, 2021 23:47
> > To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
> > Cc: xuemingl@nvidia.com; thomas@monjalon.net;
> > christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> > <qi.z.zhang@intel.com>
> > Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > VLAN design for Intel ice PMD
> >
> > On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> > > When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> > > offload, which can only handle single VLAN mode for firmware
> > > limitation. Now the firmware is updated to support double VLAN mode
> > > and single VLAN mode at the same time. It depends on the driver to do selection at the boot time.
> > >
> > > As VLAN protocol handling like strip, filter, flow is very common
> > > use, we request to support the ice PMD can run on the latest
> > > firmware for enabling the new design. This is compatible backport as the main tree.
> > >
> > > v2: Fix the subject fix with messy code like : PATCHÂ
> > >
> > > Haiyue Wang (4):
> > > net/ice/base: do not set VLAN mode in DCF mode
> > > net/ice: fix VLAN strip for double VLAN
> > > net/ice: fix VLAN 0 adding based on VLAN mode
> > > net/ice: update QinQ switch filter handling
> > >
> > > Junfeng Guo (1):
> > > net/ice: enable QinQ filter for switch
> > >
> > > Qi Zhang (12):
> > > net/ice/base: align add VSI and update VSI AQ command buffer
> > > net/ice/base: add interface to support configuring VLAN mode
> > > net/ice/base: fix outer VLAN related macro
> > > net/ice/base: add VLAN TPID for VLAN filters
> > > net/ice/base: support checking double VLAN mode
> > > net/ice/base: support configuring device in double VLAN mode
> > > net/ice/base: update boost TCAM for DVM
> > > net/ice/base: change protocol ID for VLAN in DVM
> > > net/ice/base: refactor post DDP download VLAN mode config
> > > net/ice/base: log if DDP/FW do not support QinQ
> > > net/ice/base: add inner VLAN protocol type for QinQ filter
> > > net/ice/base: fix QinQ PPPoE dummy packet selection
> > >
> > > Yuying Zhang (1):
> > > net/ice/base: add ethertype offset for QinQ dummy packet
> > >
> > > drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> > > drivers/net/ice/base/ice_bitops.h | 45 +++
> > > drivers/net/ice/base/ice_common.c | 38 ++
> > > drivers/net/ice/base/ice_common.h | 4 +
> > > drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> > > drivers/net/ice/base/ice_flex_pipe.h | 12 +
> > > drivers/net/ice/base/ice_flex_type.h | 39 ++
> > > drivers/net/ice/base/ice_protocol_type.h | 1 +
> > > drivers/net/ice/base/ice_switch.c | 124 +++++-
> > > drivers/net/ice/base/ice_switch.h | 15 +
> > > drivers/net/ice/base/ice_type.h | 4 +
> > > drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> > > drivers/net/ice/base/ice_vlan_mode.h | 16 +
> > > drivers/net/ice/base/meson.build | 1 +
> > > drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> > > drivers/net/ice/ice_ethdev.h | 10 +-
> > > drivers/net/ice/ice_generic_flow.c | 8 +
> > > drivers/net/ice/ice_generic_flow.h | 1 +
> > > drivers/net/ice/ice_switch_filter.c | 114 +++++-
> > > 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
> > > 100644 drivers/net/ice/base/ice_vlan_mode.c
> > > create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
> >
> > Hi,
> >
> > At 1.9k diffstat, this series is quite large. Given it's a new
> > feature, rather than a series of bug fixes, this would seem a bit risky to me.
> > Final word of course belongs to Xueming, since he's managing this one.
> > See:
> >
>
> 01. Does the feature break API/ABI?
>
> NO.
>
> 02. Does the feature break backwards compatibility?
>
> NO.
>
> 03. Is it for the latest LTS release (to avoid LTS upgrade issues)?
>
> Yes.
>
> 04. Is there a commitment from the proposer or affiliation to validate the feature and check for regressions in related functionality?
>
> Passed internally, if needed, an official Test-by can be provided.
>
> 05. Is there a track record of the proposer or affiliation validating stable releases?
>
> Bugzilla ?
>
> 06. Is it obvious that the feature will not impact existing functionality?
>
> Yes.
>
> 07. How intrusive is the code change?
>
> From LOC, yes, 1.9K seems to be BIG, but DPDK PMD related is 588, other is the share code in base (1320), which is tested and
> validated on other platform.
>
> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> drivers/net/ice/ice_ethdev.h | 10 +-
> drivers/net/ice/ice_generic_flow.c | 8 +
> drivers/net/ice/ice_generic_flow.h | 1 +
> drivers/net/ice/ice_switch_filter.c | 114 +++++-
>
> 08. What is the scope of the code change?
>
> PMD only.
>
> 09. Does it impact common components or vendor specific?
>
> NO.
>
> 10. Is there a justifiable use case (a clear user need)?
>
> Yes, for firmware updated. And we have the customer who wants to use the VLAN feature on LTS 20.11.
>
> 11. Is there a community consensus about the backport?
>
> ...
Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking them
one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to backport a big patch set.
The series supports new fw and QinQ, is it easy to split?
Kevin, is this the first case of feature backport? How do you think?
>
> > https://doc.dpdk.org/guides/contributing/stable.html#what-changes-shou
> > ld-be-backported
> >
> > --
> > Kind regards,
> > Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-17 8:53 ` Xueming(Steven) Li
@ 2021-06-17 10:04 ` Kevin Traynor
2021-06-18 3:22 ` Wang, Haiyue
2021-06-18 1:56 ` Wang, Haiyue
1 sibling, 1 reply; 53+ messages in thread
From: Kevin Traynor @ 2021-06-17 10:04 UTC (permalink / raw)
To: Xueming(Steven) Li, Wang, Haiyue, Luca Boccassi, stable
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, Zhang, Qi Z
On 17/06/2021 09:53, Xueming(Steven) Li wrote:
> Hi Haiyue,
>
>> -----Original Message-----
>> From: Wang, Haiyue <haiyue.wang@intel.com>
>> Sent: Thursday, June 17, 2021 9:16 AM
>> To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
>> Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
>> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
>> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>>
>>> -----Original Message-----
>>> From: Luca Boccassi <bluca@debian.org>
>>> Sent: Wednesday, June 16, 2021 23:47
>>> To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
>>> Cc: xuemingl@nvidia.com; thomas@monjalon.net;
>>> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
>>> <qi.z.zhang@intel.com>
>>> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
>>> VLAN design for Intel ice PMD
>>>
>>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
>>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
>>>> offload, which can only handle single VLAN mode for firmware
>>>> limitation. Now the firmware is updated to support double VLAN mode
>>>> and single VLAN mode at the same time. It depends on the driver to do selection at the boot time.
>>>>
>>>> As VLAN protocol handling like strip, filter, flow is very common
>>>> use, we request to support the ice PMD can run on the latest
>>>> firmware for enabling the new design. This is compatible backport as the main tree.
>>>>
>>>> v2: Fix the subject fix with messy code like : PATCHÂ
>>>>
>>>> Haiyue Wang (4):
>>>> net/ice/base: do not set VLAN mode in DCF mode
>>>> net/ice: fix VLAN strip for double VLAN
>>>> net/ice: fix VLAN 0 adding based on VLAN mode
>>>> net/ice: update QinQ switch filter handling
>>>>
>>>> Junfeng Guo (1):
>>>> net/ice: enable QinQ filter for switch
>>>>
>>>> Qi Zhang (12):
>>>> net/ice/base: align add VSI and update VSI AQ command buffer
>>>> net/ice/base: add interface to support configuring VLAN mode
>>>> net/ice/base: fix outer VLAN related macro
>>>> net/ice/base: add VLAN TPID for VLAN filters
>>>> net/ice/base: support checking double VLAN mode
>>>> net/ice/base: support configuring device in double VLAN mode
>>>> net/ice/base: update boost TCAM for DVM
>>>> net/ice/base: change protocol ID for VLAN in DVM
>>>> net/ice/base: refactor post DDP download VLAN mode config
>>>> net/ice/base: log if DDP/FW do not support QinQ
>>>> net/ice/base: add inner VLAN protocol type for QinQ filter
>>>> net/ice/base: fix QinQ PPPoE dummy packet selection
>>>>
>>>> Yuying Zhang (1):
>>>> net/ice/base: add ethertype offset for QinQ dummy packet
>>>>
>>>> drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
>>>> drivers/net/ice/base/ice_bitops.h | 45 +++
>>>> drivers/net/ice/base/ice_common.c | 38 ++
>>>> drivers/net/ice/base/ice_common.h | 4 +
>>>> drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
>>>> drivers/net/ice/base/ice_flex_pipe.h | 12 +
>>>> drivers/net/ice/base/ice_flex_type.h | 39 ++
>>>> drivers/net/ice/base/ice_protocol_type.h | 1 +
>>>> drivers/net/ice/base/ice_switch.c | 124 +++++-
>>>> drivers/net/ice/base/ice_switch.h | 15 +
>>>> drivers/net/ice/base/ice_type.h | 4 +
>>>> drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
>>>> drivers/net/ice/base/ice_vlan_mode.h | 16 +
>>>> drivers/net/ice/base/meson.build | 1 +
>>>> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
>>>> drivers/net/ice/ice_ethdev.h | 10 +-
>>>> drivers/net/ice/ice_generic_flow.c | 8 +
>>>> drivers/net/ice/ice_generic_flow.h | 1 +
>>>> drivers/net/ice/ice_switch_filter.c | 114 +++++-
>>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
>>>> 100644 drivers/net/ice/base/ice_vlan_mode.c
>>>> create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
>>>
>>> Hi,
>>>
>>> At 1.9k diffstat, this series is quite large. Given it's a new
>>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
>>> Final word of course belongs to Xueming, since he's managing this one.
>>> See:
>>>
>>
Thanks for using the questions as a way to discuss it, it is a good way
to see if they are useful. Just to note, they were to try and capture
some of the important things for a maintainer to consider, it is not a
flow chart leading to a binary answer (though clearly some things like
ABI breakage, probably would end the discussion).
>> 01. Does the feature break API/ABI?
>>
>> NO.
>>
>> 02. Does the feature break backwards compatibility?
>>
>> NO.
>>
>> 03. Is it for the latest LTS release (to avoid LTS upgrade issues)?
>>
>> Yes.
>>
>> 04. Is there a commitment from the proposer or affiliation to validate the feature and check for regressions in related functionality?
>>
>> Passed internally, if needed, an official Test-by can be provided.
>>
It would be better to share test cases (even high level), not just a
tested-by which doesn't give any idea of test coverage.
I would look at it like:
The new functionality not working with the new firmware and new code is
not a big issue.
The old functionality not working with the new firmware and the new code
is a big issue.
The old functionality not working with the old firmware and the new code
is a very big issue.
So regression testing of the old functionality would be the most
important IMHO.
>> 05. Is there a track record of the proposer or affiliation validating stable releases?
>>
Yes, Intel tests every LTS release.
>> Bugzilla ?
>>
>> 06. Is it obvious that the feature will not impact existing functionality?
>>
>> Yes.
>>
No. It is 1.9KLOC change. The key part of the question is "obvious". It
was meant so the maintainer could use their judgement and review that
for example, a few lines of code adding a PCI ID or adding a case in a
switch statement, is obviously not going to impact existing functionality.
On the other hand, for a more complex code change to existing code, it
is not immediately obvious that there would be no risk to existing
functionality.
>> 07. How intrusive is the code change?
>>
>> From LOC, yes, 1.9K seems to be BIG, but DPDK PMD related is 588, other is the share code in base (1320), which is tested and
>> validated on other platform.
>>
Very intrusive. It seems to be big, because it is big.
>> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
>> drivers/net/ice/ice_ethdev.h | 10 +-
>> drivers/net/ice/ice_generic_flow.c | 8 +
>> drivers/net/ice/ice_generic_flow.h | 1 +
>> drivers/net/ice/ice_switch_filter.c | 114 +++++-
>>
>> 08. What is the scope of the code change?
>>
>> PMD only.
>>
>> 09. Does it impact common components or vendor specific?
>>
>> NO.
>>
>> 10. Is there a justifiable use case (a clear user need)?
>>
>> Yes, for firmware updated. And we have the customer who wants to use the VLAN feature on LTS 20.11.
>>
Well, like a lot of the considerations, this is subjective and everyone
will think there is a need for their own patches, that is a given. It is
for the maintainer to try and balance the need of the feature against
the possible impacts to the LTS.
It seems like you mentioned "for updated firmware" and "customer who
wants to used the VLAN feature" as separate points. If there is a
separate need for updating firmware aside from new VLAN functionality,
it is good to state that.
>> 11. Is there a community consensus about the backport?
>>
>> ...
>
> Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking them
> one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to backport a big patch set.
> The series supports new fw and QinQ, is it easy to split?
>
> Kevin, is this the first case of feature backport? How do you think?
>
Like Luca, main concern would be the size and intrusiveness of the
changes, and if it's ok to change 1.9KLOC in this driver now, then why
not 20KLOC in next release to multiple drivers. I had pushed against a
LOC limit when this was last discussed at the TB, as it's a crude way to
judge code complexity/risk, but maybe it should be considered.
On the positive side it is self-contained and Intel has an excellent
track record for testing LTS.
>>
>>> https://doc.dpdk.org/guides/contributing/stable.html#what-changes-shou
>>> ld-be-backported
>>>
>>> --
>>> Kind regards,
>>> Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-17 8:53 ` Xueming(Steven) Li
2021-06-17 10:04 ` Kevin Traynor
@ 2021-06-18 1:56 ` Wang, Haiyue
2021-06-20 13:47 ` Xueming(Steven) Li
1 sibling, 1 reply; 53+ messages in thread
From: Wang, Haiyue @ 2021-06-18 1:56 UTC (permalink / raw)
To: Xueming(Steven) Li, Luca Boccassi, stable, Kevin Traynor
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, ktraynor, Zhang, Qi Z
> -----Original Message-----
> From: Xueming(Steven) Li <xuemingl@nvidia.com>
> Sent: Thursday, June 17, 2021 16:53
> To: Wang, Haiyue <haiyue.wang@intel.com>; Luca Boccassi <bluca@debian.org>; stable@dpdk.org; Kevin
> Traynor <ktraynor@redhat.com>
> Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com;
> ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> Hi Haiyue,
>
> > -----Original Message-----
> > From: Wang, Haiyue <haiyue.wang@intel.com>
> > Sent: Thursday, June 17, 2021 9:16 AM
> > To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
> > Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
> > christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> > Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
> >
> > > -----Original Message-----
> > > From: Luca Boccassi <bluca@debian.org>
> > > Sent: Wednesday, June 16, 2021 23:47
> > > To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
> > > Cc: xuemingl@nvidia.com; thomas@monjalon.net;
> > > christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> > > <qi.z.zhang@intel.com>
> > > Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > > VLAN design for Intel ice PMD
> > >
> > > On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> > > > When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> > > > offload, which can only handle single VLAN mode for firmware
> > > > limitation. Now the firmware is updated to support double VLAN mode
> > > > and single VLAN mode at the same time. It depends on the driver to do selection at the boot time.
> > > >
> > > > As VLAN protocol handling like strip, filter, flow is very common
> > > > use, we request to support the ice PMD can run on the latest
> > > > firmware for enabling the new design. This is compatible backport as the main tree.
> > > >
> > > > v2: Fix the subject fix with messy code like : PATCHÂ
> > > >
> > > > Haiyue Wang (4):
> > > > net/ice/base: do not set VLAN mode in DCF mode
> > > > net/ice: fix VLAN strip for double VLAN
> > > > net/ice: fix VLAN 0 adding based on VLAN mode
> > > > net/ice: update QinQ switch filter handling
> > > >
> > > > Junfeng Guo (1):
> > > > net/ice: enable QinQ filter for switch
> > > >
> > > > Qi Zhang (12):
> > > > net/ice/base: align add VSI and update VSI AQ command buffer
> > > > net/ice/base: add interface to support configuring VLAN mode
> > > > net/ice/base: fix outer VLAN related macro
> > > > net/ice/base: add VLAN TPID for VLAN filters
> > > > net/ice/base: support checking double VLAN mode
> > > > net/ice/base: support configuring device in double VLAN mode
> > > > net/ice/base: update boost TCAM for DVM
> > > > net/ice/base: change protocol ID for VLAN in DVM
> > > > net/ice/base: refactor post DDP download VLAN mode config
> > > > net/ice/base: log if DDP/FW do not support QinQ
> > > > net/ice/base: add inner VLAN protocol type for QinQ filter
> > > > net/ice/base: fix QinQ PPPoE dummy packet selection
> > > >
> > > > Yuying Zhang (1):
> > > > net/ice/base: add ethertype offset for QinQ dummy packet
> > > >
> > > > drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> > > > drivers/net/ice/base/ice_bitops.h | 45 +++
> > > > drivers/net/ice/base/ice_common.c | 38 ++
> > > > drivers/net/ice/base/ice_common.h | 4 +
> > > > drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> > > > drivers/net/ice/base/ice_flex_pipe.h | 12 +
> > > > drivers/net/ice/base/ice_flex_type.h | 39 ++
> > > > drivers/net/ice/base/ice_protocol_type.h | 1 +
> > > > drivers/net/ice/base/ice_switch.c | 124 +++++-
> > > > drivers/net/ice/base/ice_switch.h | 15 +
> > > > drivers/net/ice/base/ice_type.h | 4 +
> > > > drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> > > > drivers/net/ice/base/ice_vlan_mode.h | 16 +
> > > > drivers/net/ice/base/meson.build | 1 +
> > > > drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> > > > drivers/net/ice/ice_ethdev.h | 10 +-
> > > > drivers/net/ice/ice_generic_flow.c | 8 +
> > > > drivers/net/ice/ice_generic_flow.h | 1 +
> > > > drivers/net/ice/ice_switch_filter.c | 114 +++++-
> > > > 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
> > > > 100644 drivers/net/ice/base/ice_vlan_mode.c
> > > > create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
> > >
> > ...
>
> Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking them
> one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to backport a
> big patch set.
> The series supports new fw and QinQ, is it easy to split?
Split the patch ?
>
> Kevin, is this the first case of feature backport? How do you think?
>
> >
> > > https://doc.dpdk.org/guides/contributing/stable.html#what-changes-shou
> > > ld-be-backported
> > >
> > > --
> > > Kind regards,
> > > Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-17 10:04 ` Kevin Traynor
@ 2021-06-18 3:22 ` Wang, Haiyue
2021-06-18 10:12 ` Kevin Traynor
2021-06-21 8:28 ` Thomas Monjalon
0 siblings, 2 replies; 53+ messages in thread
From: Wang, Haiyue @ 2021-06-18 3:22 UTC (permalink / raw)
To: Kevin Traynor, Xueming(Steven) Li, Luca Boccassi, stable
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, Zhang, Qi Z, Fu, Qi
> -----Original Message-----
> From: Kevin Traynor <ktraynor@redhat.com>
> Sent: Thursday, June 17, 2021 18:05
> To: Xueming(Steven) Li <xuemingl@nvidia.com>; Wang, Haiyue <haiyue.wang@intel.com>; Luca Boccassi
> <bluca@debian.org>; stable@dpdk.org
> Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com; Zhang, Qi Z
> <qi.z.zhang@intel.com>
> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> On 17/06/2021 09:53, Xueming(Steven) Li wrote:
> > Hi Haiyue,
> >
> >> -----Original Message-----
> >> From: Wang, Haiyue <haiyue.wang@intel.com>
> >> Sent: Thursday, June 17, 2021 9:16 AM
> >> To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
> >> Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
> >> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> >> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
> >>
> >>> -----Original Message-----
> >>> From: Luca Boccassi <bluca@debian.org>
> >>> Sent: Wednesday, June 16, 2021 23:47
> >>> To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
> >>> Cc: xuemingl@nvidia.com; thomas@monjalon.net;
> >>> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> >>> <qi.z.zhang@intel.com>
> >>> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> >>> VLAN design for Intel ice PMD
> >>>
> >>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> >>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> >>>> offload, which can only handle single VLAN mode for firmware
> >>>> limitation. Now the firmware is updated to support double VLAN mode
> >>>> and single VLAN mode at the same time. It depends on the driver to do selection at the boot time.
> >>>>
> >>>> As VLAN protocol handling like strip, filter, flow is very common
> >>>> use, we request to support the ice PMD can run on the latest
> >>>> firmware for enabling the new design. This is compatible backport as the main tree.
> >>>>
> >>>> v2: Fix the subject fix with messy code like : PATCHÂ
> >>>>
> >>>> Haiyue Wang (4):
> >>>> net/ice/base: do not set VLAN mode in DCF mode
> >>>> net/ice: fix VLAN strip for double VLAN
> >>>> net/ice: fix VLAN 0 adding based on VLAN mode
> >>>> net/ice: update QinQ switch filter handling
> >>>>
> >>>> Junfeng Guo (1):
> >>>> net/ice: enable QinQ filter for switch
> >>>>
> >>>> Qi Zhang (12):
> >>>> net/ice/base: align add VSI and update VSI AQ command buffer
> >>>> net/ice/base: add interface to support configuring VLAN mode
> >>>> net/ice/base: fix outer VLAN related macro
> >>>> net/ice/base: add VLAN TPID for VLAN filters
> >>>> net/ice/base: support checking double VLAN mode
> >>>> net/ice/base: support configuring device in double VLAN mode
> >>>> net/ice/base: update boost TCAM for DVM
> >>>> net/ice/base: change protocol ID for VLAN in DVM
> >>>> net/ice/base: refactor post DDP download VLAN mode config
> >>>> net/ice/base: log if DDP/FW do not support QinQ
> >>>> net/ice/base: add inner VLAN protocol type for QinQ filter
> >>>> net/ice/base: fix QinQ PPPoE dummy packet selection
> >>>>
> >>>> Yuying Zhang (1):
> >>>> net/ice/base: add ethertype offset for QinQ dummy packet
> >>>>
> >>>> drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> >>>> drivers/net/ice/base/ice_bitops.h | 45 +++
> >>>> drivers/net/ice/base/ice_common.c | 38 ++
> >>>> drivers/net/ice/base/ice_common.h | 4 +
> >>>> drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> >>>> drivers/net/ice/base/ice_flex_pipe.h | 12 +
> >>>> drivers/net/ice/base/ice_flex_type.h | 39 ++
> >>>> drivers/net/ice/base/ice_protocol_type.h | 1 +
> >>>> drivers/net/ice/base/ice_switch.c | 124 +++++-
> >>>> drivers/net/ice/base/ice_switch.h | 15 +
> >>>> drivers/net/ice/base/ice_type.h | 4 +
> >>>> drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> >>>> drivers/net/ice/base/ice_vlan_mode.h | 16 +
> >>>> drivers/net/ice/base/meson.build | 1 +
> >>>> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> >>>> drivers/net/ice/ice_ethdev.h | 10 +-
> >>>> drivers/net/ice/ice_generic_flow.c | 8 +
> >>>> drivers/net/ice/ice_generic_flow.h | 1 +
> >>>> drivers/net/ice/ice_switch_filter.c | 114 +++++-
> >>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
> >>>> 100644 drivers/net/ice/base/ice_vlan_mode.c
> >>>> create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
> >>>
> >>> Hi,
> >>>
> >>> At 1.9k diffstat, this series is quite large. Given it's a new
> >>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
> >>> Final word of course belongs to Xueming, since he's managing this one.
> >>> See:
> >>>
> >>
>
> Thanks for using the questions as a way to discuss it, it is a good way
> to see if they are useful. Just to note, they were to try and capture
> some of the important things for a maintainer to consider, it is not a
> flow chart leading to a binary answer (though clearly some things like
> ABI breakage, probably would end the discussion).
>
> >> 01. Does the feature break API/ABI?
> >>
> >> NO.
> >>
> >> 02. Does the feature break backwards compatibility?
> >>
> >> NO.
> >>
> >> 03. Is it for the latest LTS release (to avoid LTS upgrade issues)?
> >>
> >> Yes.
> >>
> >> 04. Is there a commitment from the proposer or affiliation to validate the feature and check for
> regressions in related functionality?
> >>
> >> Passed internally, if needed, an official Test-by can be provided.
> >>
>
> It would be better to share test cases (even high level), not just a
> tested-by which doesn't give any idea of test coverage.
+ Fu Qi, who can share the test cases from dts.
>
> I would look at it like:
> The new functionality not working with the new firmware and new code is
> not a big issue.
>
> The old functionality not working with the new firmware and the new code
> is a big issue.
>
> The old functionality not working with the old firmware and the new code
> is a very big issue.
>
> So regression testing of the old functionality would be the most
> important IMHO.
This is some kind of compatibility matrix, sure, it make both works. This part
can be covered by the test cases.
>
> >> 05. Is there a track record of the proposer or affiliation validating stable releases?
> >>
>
> Yes, Intel tests every LTS release.
>
> >> Bugzilla ?
> >>
> >> 06. Is it obvious that the feature will not impact existing functionality?
> >>
> >> Yes.
> >>
>
> No. It is 1.9KLOC change. The key part of the question is "obvious". It
> was meant so the maintainer could use their judgement and review that
> for example, a few lines of code adding a PCI ID or adding a case in a
> switch statement, is obviously not going to impact existing functionality.
> On the other hand, for a more complex code change to existing code, it
> is not immediately obvious that there would be no risk to existing
> functionality.
>
> >> 07. How intrusive is the code change?
> >>
> >> From LOC, yes, 1.9K seems to be BIG, but DPDK PMD related is 588, other is the share code in base
> (1320), which is tested and
> >> validated on other platform.
> >>
>
> Very intrusive. It seems to be big, because it is big.
>
> >> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> >> drivers/net/ice/ice_ethdev.h | 10 +-
> >> drivers/net/ice/ice_generic_flow.c | 8 +
> >> drivers/net/ice/ice_generic_flow.h | 1 +
> >> drivers/net/ice/ice_switch_filter.c | 114 +++++-
> >>
> >> 08. What is the scope of the code change?
> >>
> >> PMD only.
> >>
> >> 09. Does it impact common components or vendor specific?
> >>
> >> NO.
> >>
> >> 10. Is there a justifiable use case (a clear user need)?
> >>
> >> Yes, for firmware updated. And we have the customer who wants to use the VLAN feature on LTS 20.11.
> >>
>
> Well, like a lot of the considerations, this is subjective and everyone
> will think there is a need for their own patches, that is a given. It is
> for the maintainer to try and balance the need of the feature against
> the possible impacts to the LTS.
>
> It seems like you mentioned "for updated firmware" and "customer who
> wants to used the VLAN feature" as separate points. If there is a
> separate need for updating firmware aside from new VLAN functionality,
> it is good to state that.
>
> >> 11. Is there a community consensus about the backport?
> >>
> >> ...
> >
> > Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
> them
> > one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to backport
> a big patch set.
> > The series supports new fw and QinQ, is it easy to split?
> >
> > Kevin, is this the first case of feature backport? How do you think?
> >
>
> Like Luca, main concern would be the size and intrusiveness of the
> changes, and if it's ok to change 1.9KLOC in this driver now, then why
> not 20KLOC in next release to multiple drivers. I had pushed against a
TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
one, current VLAN has a limited usage, customer is hard to use. That's why we
try to request to backport the new VLAN design.
> LOC limit when this was last discussed at the TB, as it's a crude way to
> judge code complexity/risk, but maybe it should be considered.
>
> On the positive side it is self-contained and Intel has an excellent
> track record for testing LTS.
>
> >>
> >>> https://doc.dpdk.org/guides/contributing/stable.html#what-changes-shou
> >>> ld-be-backported
> >>>
> >>> --
> >>> Kind regards,
> >>> Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-18 3:22 ` Wang, Haiyue
@ 2021-06-18 10:12 ` Kevin Traynor
2021-06-18 11:46 ` Wang, Haiyue
2021-06-21 8:28 ` Thomas Monjalon
1 sibling, 1 reply; 53+ messages in thread
From: Kevin Traynor @ 2021-06-18 10:12 UTC (permalink / raw)
To: Wang, Haiyue, Xueming(Steven) Li, Luca Boccassi, stable
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, Zhang, Qi Z, Fu, Qi
On 18/06/2021 04:22, Wang, Haiyue wrote:
>> -----Original Message-----
>> From: Kevin Traynor <ktraynor@redhat.com>
>> Sent: Thursday, June 17, 2021 18:05
>> To: Xueming(Steven) Li <xuemingl@nvidia.com>; Wang, Haiyue <haiyue.wang@intel.com>; Luca Boccassi
>> <bluca@debian.org>; stable@dpdk.org
>> Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com; Zhang, Qi Z
>> <qi.z.zhang@intel.com>
>> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>>
>> On 17/06/2021 09:53, Xueming(Steven) Li wrote:
>>> Hi Haiyue,
>>>
>>>> -----Original Message-----
>>>> From: Wang, Haiyue <haiyue.wang@intel.com>
>>>> Sent: Thursday, June 17, 2021 9:16 AM
>>>> To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
>>>> Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
>>>> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
>>>> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>>>>
>>>>> -----Original Message-----
>>>>> From: Luca Boccassi <bluca@debian.org>
>>>>> Sent: Wednesday, June 16, 2021 23:47
>>>>> To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
>>>>> Cc: xuemingl@nvidia.com; thomas@monjalon.net;
>>>>> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
>>>>> <qi.z.zhang@intel.com>
>>>>> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
>>>>> VLAN design for Intel ice PMD
>>>>>
>>>>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
>>>>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
>>>>>> offload, which can only handle single VLAN mode for firmware
>>>>>> limitation. Now the firmware is updated to support double VLAN mode
>>>>>> and single VLAN mode at the same time. It depends on the driver to do selection at the boot time.
>>>>>>
>>>>>> As VLAN protocol handling like strip, filter, flow is very common
>>>>>> use, we request to support the ice PMD can run on the latest
>>>>>> firmware for enabling the new design. This is compatible backport as the main tree.
>>>>>>
>>>>>> v2: Fix the subject fix with messy code like : PATCHÂ
>>>>>>
>>>>>> Haiyue Wang (4):
>>>>>> net/ice/base: do not set VLAN mode in DCF mode
>>>>>> net/ice: fix VLAN strip for double VLAN
>>>>>> net/ice: fix VLAN 0 adding based on VLAN mode
>>>>>> net/ice: update QinQ switch filter handling
>>>>>>
>>>>>> Junfeng Guo (1):
>>>>>> net/ice: enable QinQ filter for switch
>>>>>>
>>>>>> Qi Zhang (12):
>>>>>> net/ice/base: align add VSI and update VSI AQ command buffer
>>>>>> net/ice/base: add interface to support configuring VLAN mode
>>>>>> net/ice/base: fix outer VLAN related macro
>>>>>> net/ice/base: add VLAN TPID for VLAN filters
>>>>>> net/ice/base: support checking double VLAN mode
>>>>>> net/ice/base: support configuring device in double VLAN mode
>>>>>> net/ice/base: update boost TCAM for DVM
>>>>>> net/ice/base: change protocol ID for VLAN in DVM
>>>>>> net/ice/base: refactor post DDP download VLAN mode config
>>>>>> net/ice/base: log if DDP/FW do not support QinQ
>>>>>> net/ice/base: add inner VLAN protocol type for QinQ filter
>>>>>> net/ice/base: fix QinQ PPPoE dummy packet selection
>>>>>>
>>>>>> Yuying Zhang (1):
>>>>>> net/ice/base: add ethertype offset for QinQ dummy packet
>>>>>>
>>>>>> drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
>>>>>> drivers/net/ice/base/ice_bitops.h | 45 +++
>>>>>> drivers/net/ice/base/ice_common.c | 38 ++
>>>>>> drivers/net/ice/base/ice_common.h | 4 +
>>>>>> drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
>>>>>> drivers/net/ice/base/ice_flex_pipe.h | 12 +
>>>>>> drivers/net/ice/base/ice_flex_type.h | 39 ++
>>>>>> drivers/net/ice/base/ice_protocol_type.h | 1 +
>>>>>> drivers/net/ice/base/ice_switch.c | 124 +++++-
>>>>>> drivers/net/ice/base/ice_switch.h | 15 +
>>>>>> drivers/net/ice/base/ice_type.h | 4 +
>>>>>> drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
>>>>>> drivers/net/ice/base/ice_vlan_mode.h | 16 +
>>>>>> drivers/net/ice/base/meson.build | 1 +
>>>>>> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
>>>>>> drivers/net/ice/ice_ethdev.h | 10 +-
>>>>>> drivers/net/ice/ice_generic_flow.c | 8 +
>>>>>> drivers/net/ice/ice_generic_flow.h | 1 +
>>>>>> drivers/net/ice/ice_switch_filter.c | 114 +++++-
>>>>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
>>>>>> 100644 drivers/net/ice/base/ice_vlan_mode.c
>>>>>> create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
>>>>>
>>>>> Hi,
>>>>>
>>>>> At 1.9k diffstat, this series is quite large. Given it's a new
>>>>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
>>>>> Final word of course belongs to Xueming, since he's managing this one.
>>>>> See:
>>>>>
>>>>
>>
>> Thanks for using the questions as a way to discuss it, it is a good way
>> to see if they are useful. Just to note, they were to try and capture
>> some of the important things for a maintainer to consider, it is not a
>> flow chart leading to a binary answer (though clearly some things like
>> ABI breakage, probably would end the discussion).
>>
>>>> 01. Does the feature break API/ABI?
>>>>
>>>> NO.
>>>>
>>>> 02. Does the feature break backwards compatibility?
>>>>
>>>> NO.
>>>>
>>>> 03. Is it for the latest LTS release (to avoid LTS upgrade issues)?
>>>>
>>>> Yes.
>>>>
>>>> 04. Is there a commitment from the proposer or affiliation to validate the feature and check for
>> regressions in related functionality?
>>>>
>>>> Passed internally, if needed, an official Test-by can be provided.
>>>>
>>
>> It would be better to share test cases (even high level), not just a
>> tested-by which doesn't give any idea of test coverage.
>
> + Fu Qi, who can share the test cases from dts.
>
>>
>> I would look at it like:
>> The new functionality not working with the new firmware and new code is
>> not a big issue.
>>
>> The old functionality not working with the new firmware and the new code
>> is a big issue.
>>
>> The old functionality not working with the old firmware and the new code
>> is a very big issue.
>>
>> So regression testing of the old functionality would be the most
>> important IMHO.
>
> This is some kind of compatibility matrix, sure, it make both works. This part
> can be covered by the test cases.
>
>>
>>>> 05. Is there a track record of the proposer or affiliation validating stable releases?
>>>>
>>
>> Yes, Intel tests every LTS release.
>>
>>>> Bugzilla ?
>>>>
>>>> 06. Is it obvious that the feature will not impact existing functionality?
>>>>
>>>> Yes.
>>>>
>>
>> No. It is 1.9KLOC change. The key part of the question is "obvious". It
>> was meant so the maintainer could use their judgement and review that
>> for example, a few lines of code adding a PCI ID or adding a case in a
>> switch statement, is obviously not going to impact existing functionality.
>> On the other hand, for a more complex code change to existing code, it
>> is not immediately obvious that there would be no risk to existing
>> functionality.
>>
>>>> 07. How intrusive is the code change?
>>>>
>>>> From LOC, yes, 1.9K seems to be BIG, but DPDK PMD related is 588, other is the share code in base
>> (1320), which is tested and
>>>> validated on other platform.
>>>>
>>
>> Very intrusive. It seems to be big, because it is big.
>>
>>>> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
>>>> drivers/net/ice/ice_ethdev.h | 10 +-
>>>> drivers/net/ice/ice_generic_flow.c | 8 +
>>>> drivers/net/ice/ice_generic_flow.h | 1 +
>>>> drivers/net/ice/ice_switch_filter.c | 114 +++++-
>>>>
>>>> 08. What is the scope of the code change?
>>>>
>>>> PMD only.
>>>>
>>>> 09. Does it impact common components or vendor specific?
>>>>
>>>> NO.
>>>>
>>>> 10. Is there a justifiable use case (a clear user need)?
>>>>
>>>> Yes, for firmware updated. And we have the customer who wants to use the VLAN feature on LTS 20.11.
>>>>
>>
>> Well, like a lot of the considerations, this is subjective and everyone
>> will think there is a need for their own patches, that is a given. It is
>> for the maintainer to try and balance the need of the feature against
>> the possible impacts to the LTS.
>>
>> It seems like you mentioned "for updated firmware" and "customer who
>> wants to used the VLAN feature" as separate points. If there is a
>> separate need for updating firmware aside from new VLAN functionality,
>> it is good to state that.
>>
>>>> 11. Is there a community consensus about the backport?
>>>>
>>>> ...
>>>
>>> Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
>> them
>>> one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to backport
>> a big patch set.
>>> The series supports new fw and QinQ, is it easy to split?
>>>
>>> Kevin, is this the first case of feature backport? How do you think?
>>>
>>
>> Like Luca, main concern would be the size and intrusiveness of the
>> changes, and if it's ok to change 1.9KLOC in this driver now, then why
>> not 20KLOC in next release to multiple drivers. I had pushed against a
>
> TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
> one, current VLAN has a limited usage, customer is hard to use. That's why we
> try to request to backport the new VLAN design.
>
Just to note, I wasn't specifically referring to Intel drivers, just
discussing what is an acceptable limit of churn.
>> LOC limit when this was last discussed at the TB, as it's a crude way to
>> judge code complexity/risk, but maybe it should be considered.
>>
>> On the positive side it is self-contained and Intel has an excellent
>> track record for testing LTS.
>>
>>>>
>>>>> https://doc.dpdk.org/guides/contributing/stable.html#what-changes-shou
>>>>> ld-be-backported
>>>>>
>>>>> --
>>>>> Kind regards,
>>>>> Luca Boccassi
>
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-18 10:12 ` Kevin Traynor
@ 2021-06-18 11:46 ` Wang, Haiyue
0 siblings, 0 replies; 53+ messages in thread
From: Wang, Haiyue @ 2021-06-18 11:46 UTC (permalink / raw)
To: Kevin Traynor, Xueming(Steven) Li, Luca Boccassi, stable
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, Zhang, Qi Z, Fu, Qi
> -----Original Message-----
> From: Kevin Traynor <ktraynor@redhat.com>
> Sent: Friday, June 18, 2021 18:13
> To: Wang, Haiyue <haiyue.wang@intel.com>; Xueming(Steven) Li <xuemingl@nvidia.com>; Luca Boccassi
> <bluca@debian.org>; stable@dpdk.org
> Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com; Zhang, Qi Z
> <qi.z.zhang@intel.com>; Fu, Qi <qi.fu@intel.com>
> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> On 18/06/2021 04:22, Wang, Haiyue wrote:
> >> -----Original Message-----
> >> From: Kevin Traynor <ktraynor@redhat.com>
> >> Sent: Thursday, June 17, 2021 18:05
> >> To: Xueming(Steven) Li <xuemingl@nvidia.com>; Wang, Haiyue <haiyue.wang@intel.com>; Luca Boccassi
> >> <bluca@debian.org>; stable@dpdk.org
> >> Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com; Zhang, Qi
> Z
> >> <qi.z.zhang@intel.com>
> >> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
> >>
> >> On 17/06/2021 09:53, Xueming(Steven) Li wrote:
> >>> Hi Haiyue,
> >>>
> >>>> -----Original Message-----
> >>>> From: Wang, Haiyue <haiyue.wang@intel.com>
> >>>> Sent: Thursday, June 17, 2021 9:16 AM
> >>>> To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
> >>>> Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
> >>>> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> >>>> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
> >>>>
> >>>>> -----Original Message-----
> >>>>> From: Luca Boccassi <bluca@debian.org>
> >>>>> Sent: Wednesday, June 16, 2021 23:47
> >>>>> To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
> >>>>> Cc: xuemingl@nvidia.com; thomas@monjalon.net;
> >>>>> christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> >>>>> <qi.z.zhang@intel.com>
> >>>>> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> >>>>> VLAN design for Intel ice PMD
> >>>>>
> >>>>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> >>>>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> >>>>>> offload, which can only handle single VLAN mode for firmware
> >>>>>> limitation. Now the firmware is updated to support double VLAN mode
> >>>>>> and single VLAN mode at the same time. It depends on the driver to do selection at the boot
> time.
> >>>>>>
> >>>>>> As VLAN protocol handling like strip, filter, flow is very common
> >>>>>> use, we request to support the ice PMD can run on the latest
> >>>>>> firmware for enabling the new design. This is compatible backport as the main tree.
> >>>>>>
> >>>>>> v2: Fix the subject fix with messy code like : PATCHÂ
> >>>>>>
> >>>>>> Haiyue Wang (4):
> >>>>>> net/ice/base: do not set VLAN mode in DCF mode
> >>>>>> net/ice: fix VLAN strip for double VLAN
> >>>>>> net/ice: fix VLAN 0 adding based on VLAN mode
> >>>>>> net/ice: update QinQ switch filter handling
> >>>>>>
> >>>>>> Junfeng Guo (1):
> >>>>>> net/ice: enable QinQ filter for switch
> >>>>>>
> >>>>>> Qi Zhang (12):
> >>>>>> net/ice/base: align add VSI and update VSI AQ command buffer
> >>>>>> net/ice/base: add interface to support configuring VLAN mode
> >>>>>> net/ice/base: fix outer VLAN related macro
> >>>>>> net/ice/base: add VLAN TPID for VLAN filters
> >>>>>> net/ice/base: support checking double VLAN mode
> >>>>>> net/ice/base: support configuring device in double VLAN mode
> >>>>>> net/ice/base: update boost TCAM for DVM
> >>>>>> net/ice/base: change protocol ID for VLAN in DVM
> >>>>>> net/ice/base: refactor post DDP download VLAN mode config
> >>>>>> net/ice/base: log if DDP/FW do not support QinQ
> >>>>>> net/ice/base: add inner VLAN protocol type for QinQ filter
> >>>>>> net/ice/base: fix QinQ PPPoE dummy packet selection
> >>>>>>
> >>>>>> Yuying Zhang (1):
> >>>>>> net/ice/base: add ethertype offset for QinQ dummy packet
> >>>>>>
> >>>>>> drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> >>>>>> drivers/net/ice/base/ice_bitops.h | 45 +++
> >>>>>> drivers/net/ice/base/ice_common.c | 38 ++
> >>>>>> drivers/net/ice/base/ice_common.h | 4 +
> >>>>>> drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> >>>>>> drivers/net/ice/base/ice_flex_pipe.h | 12 +
> >>>>>> drivers/net/ice/base/ice_flex_type.h | 39 ++
> >>>>>> drivers/net/ice/base/ice_protocol_type.h | 1 +
> >>>>>> drivers/net/ice/base/ice_switch.c | 124 +++++-
> >>>>>> drivers/net/ice/base/ice_switch.h | 15 +
> >>>>>> drivers/net/ice/base/ice_type.h | 4 +
> >>>>>> drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> >>>>>> drivers/net/ice/base/ice_vlan_mode.h | 16 +
> >>>>>> drivers/net/ice/base/meson.build | 1 +
> >>>>>> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> >>>>>> drivers/net/ice/ice_ethdev.h | 10 +-
> >>>>>> drivers/net/ice/ice_generic_flow.c | 8 +
> >>>>>> drivers/net/ice/ice_generic_flow.h | 1 +
> >>>>>> drivers/net/ice/ice_switch_filter.c | 114 +++++-
> >>>>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
> >>>>>> 100644 drivers/net/ice/base/ice_vlan_mode.c
> >>>>>> create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
> >>>>>
> >>>>> Hi,
> >>>>>
> >>>>> At 1.9k diffstat, this series is quite large. Given it's a new
> >>>>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
> >>>>> Final word of course belongs to Xueming, since he's managing this one.
> >>>>> See:
> >>>>>
> >>>>
> >>
> >> Thanks for using the questions as a way to discuss it, it is a good way
> >> to see if they are useful. Just to note, they were to try and capture
> >> some of the important things for a maintainer to consider, it is not a
> >> flow chart leading to a binary answer (though clearly some things like
> >> ABI breakage, probably would end the discussion).
> >>
> >>>> 01. Does the feature break API/ABI?
> >>>>
> >>>> NO.
> >>>>
> >>>> 02. Does the feature break backwards compatibility?
> >>>>
> >>>> NO.
> >>>>
> >>>> 03. Is it for the latest LTS release (to avoid LTS upgrade issues)?
> >>>>
> >>>> Yes.
> >>>>
> >>>> 04. Is there a commitment from the proposer or affiliation to validate the feature and check for
> >> regressions in related functionality?
> >>>>
> >>>> Passed internally, if needed, an official Test-by can be provided.
> >>>>
> >>
> >> It would be better to share test cases (even high level), not just a
> >> tested-by which doesn't give any idea of test coverage.
> >
> > + Fu Qi, who can share the test cases from dts.
> >
> >>
> >> I would look at it like:
> >> The new functionality not working with the new firmware and new code is
> >> not a big issue.
> >>
> >> The old functionality not working with the new firmware and the new code
> >> is a big issue.
> >>
> >> The old functionality not working with the old firmware and the new code
> >> is a very big issue.
> >>
> >> So regression testing of the old functionality would be the most
> >> important IMHO.
> >
> > This is some kind of compatibility matrix, sure, it make both works. This part
> > can be covered by the test cases.
> >
> >>
> >>>> 05. Is there a track record of the proposer or affiliation validating stable releases?
> >>>>
> >>
> >> Yes, Intel tests every LTS release.
> >>
> >>>> Bugzilla ?
> >>>>
> >>>> 06. Is it obvious that the feature will not impact existing functionality?
> >>>>
> >>>> Yes.
> >>>>
> >>
> >> No. It is 1.9KLOC change. The key part of the question is "obvious". It
> >> was meant so the maintainer could use their judgement and review that
> >> for example, a few lines of code adding a PCI ID or adding a case in a
> >> switch statement, is obviously not going to impact existing functionality.
> >> On the other hand, for a more complex code change to existing code, it
> >> is not immediately obvious that there would be no risk to existing
> >> functionality.
> >>
> >>>> 07. How intrusive is the code change?
> >>>>
> >>>> From LOC, yes, 1.9K seems to be BIG, but DPDK PMD related is 588, other is the share code in
> base
> >> (1320), which is tested and
> >>>> validated on other platform.
> >>>>
> >>
> >> Very intrusive. It seems to be big, because it is big.
> >>
> >>>> drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> >>>> drivers/net/ice/ice_ethdev.h | 10 +-
> >>>> drivers/net/ice/ice_generic_flow.c | 8 +
> >>>> drivers/net/ice/ice_generic_flow.h | 1 +
> >>>> drivers/net/ice/ice_switch_filter.c | 114 +++++-
> >>>>
> >>>> 08. What is the scope of the code change?
> >>>>
> >>>> PMD only.
> >>>>
> >>>> 09. Does it impact common components or vendor specific?
> >>>>
> >>>> NO.
> >>>>
> >>>> 10. Is there a justifiable use case (a clear user need)?
> >>>>
> >>>> Yes, for firmware updated. And we have the customer who wants to use the VLAN feature on LTS
> 20.11.
> >>>>
> >>
> >> Well, like a lot of the considerations, this is subjective and everyone
> >> will think there is a need for their own patches, that is a given. It is
> >> for the maintainer to try and balance the need of the feature against
> >> the possible impacts to the LTS.
> >>
> >> It seems like you mentioned "for updated firmware" and "customer who
> >> wants to used the VLAN feature" as separate points. If there is a
> >> separate need for updating firmware aside from new VLAN functionality,
> >> it is good to state that.
> >>
> >>>> 11. Is there a community consensus about the backport?
> >>>>
> >>>> ...
> >>>
> >>> Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
> >> them
> >>> one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to
> backport
> >> a big patch set.
> >>> The series supports new fw and QinQ, is it easy to split?
> >>>
> >>> Kevin, is this the first case of feature backport? How do you think?
> >>>
> >>
> >> Like Luca, main concern would be the size and intrusiveness of the
> >> changes, and if it's ok to change 1.9KLOC in this driver now, then why
> >> not 20KLOC in next release to multiple drivers. I had pushed against a
> >
> > TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
> > one, current VLAN has a limited usage, customer is hard to use. That's why we
> > try to request to backport the new VLAN design.
> >
>
> Just to note, I wasn't specifically referring to Intel drivers, just
Sure, I 100% understood. ;-)
> discussing what is an acceptable limit of churn.
And I also 100% agree that LOC will make tree maintainer feel uncomfortable,
in theory, "more code, more bugs", especially many "+++----".
Currently, two patches make the patchset look like that we change too many
things:
a. [PATCH 01] net/ice/base: align add VSI and update VSI AQ command buffer
drivers/net/ice/base/ice_adminq_cmd.h | 209 +++++++++++++-------------
drivers/net/ice/ice_ethdev.c | 88 +++++------
2 files changed, 152 insertions(+), 145 deletions(-)
It's mainly about the register bit definition rename, to sync with
new datasheet table.
b. [PATCH 15] net/ice: fix VLAN strip for double VLAN
drivers/net/ice/ice_ethdev.c | 297 +++++++++++++++--------------------
1 file changed, 131 insertions(+), 166 deletions(-)
It's mainly to replace the two VLAN ops design:
.vlan_filter_set
.vlan_offload_set
>
> >> LOC limit when this was last discussed at the TB, as it's a crude way to
> >> judge code complexity/risk, but maybe it should be considered.
> >>
> >> On the positive side it is self-contained and Intel has an excellent
> >> track record for testing LTS.
> >>
> >>>>
> >>>>> https://doc.dpdk.org/guides/contributing/stable.html#what-changes-shou
> >>>>> ld-be-backported
> >>>>>
> >>>>> --
> >>>>> Kind regards,
> >>>>> Luca Boccassi
> >
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-18 1:56 ` Wang, Haiyue
@ 2021-06-20 13:47 ` Xueming(Steven) Li
2021-06-21 1:35 ` Wang, Haiyue
0 siblings, 1 reply; 53+ messages in thread
From: Xueming(Steven) Li @ 2021-06-20 13:47 UTC (permalink / raw)
To: Wang, Haiyue, Luca Boccassi, stable, Kevin Traynor
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, ktraynor, Zhang, Qi Z
> -----Original Message-----
> From: Wang, Haiyue <haiyue.wang@intel.com>
> Sent: Friday, June 18, 2021 9:57 AM
> To: Xueming(Steven) Li <xuemingl@nvidia.com>; Luca Boccassi <bluca@debian.org>; stable@dpdk.org; Kevin Traynor
> <ktraynor@redhat.com>
> Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> <qi.z.zhang@intel.com>
> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> > -----Original Message-----
> > From: Xueming(Steven) Li <xuemingl@nvidia.com>
> > Sent: Thursday, June 17, 2021 16:53
> > To: Wang, Haiyue <haiyue.wang@intel.com>; Luca Boccassi
> > <bluca@debian.org>; stable@dpdk.org; Kevin Traynor
> > <ktraynor@redhat.com>
> > Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
> > christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> > <qi.z.zhang@intel.com>
> > Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > VLAN design for Intel ice PMD
> >
> > Hi Haiyue,
> >
> > > -----Original Message-----
> > > From: Wang, Haiyue <haiyue.wang@intel.com>
> > > Sent: Thursday, June 17, 2021 9:16 AM
> > > To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
> > > Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas
> > > Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com;
> > > ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> > > Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > > VLAN design for Intel ice PMD
> > >
> > > > -----Original Message-----
> > > > From: Luca Boccassi <bluca@debian.org>
> > > > Sent: Wednesday, June 16, 2021 23:47
> > > > To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
> > > > Cc: xuemingl@nvidia.com; thomas@monjalon.net;
> > > > christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> > > > <qi.z.zhang@intel.com>
> > > > Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > > > VLAN design for Intel ice PMD
> > > >
> > > > On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> > > > > When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> > > > > offload, which can only handle single VLAN mode for firmware
> > > > > limitation. Now the firmware is updated to support double VLAN
> > > > > mode and single VLAN mode at the same time. It depends on the driver to do selection at the boot time.
> > > > >
> > > > > As VLAN protocol handling like strip, filter, flow is very
> > > > > common use, we request to support the ice PMD can run on the
> > > > > latest firmware for enabling the new design. This is compatible backport as the main tree.
> > > > >
> > > > > v2: Fix the subject fix with messy code like : PATCHÂ
> > > > >
> > > > > Haiyue Wang (4):
> > > > > net/ice/base: do not set VLAN mode in DCF mode
> > > > > net/ice: fix VLAN strip for double VLAN
> > > > > net/ice: fix VLAN 0 adding based on VLAN mode
> > > > > net/ice: update QinQ switch filter handling
> > > > >
> > > > > Junfeng Guo (1):
> > > > > net/ice: enable QinQ filter for switch
> > > > >
> > > > > Qi Zhang (12):
> > > > > net/ice/base: align add VSI and update VSI AQ command buffer
> > > > > net/ice/base: add interface to support configuring VLAN mode
> > > > > net/ice/base: fix outer VLAN related macro
> > > > > net/ice/base: add VLAN TPID for VLAN filters
> > > > > net/ice/base: support checking double VLAN mode
> > > > > net/ice/base: support configuring device in double VLAN mode
> > > > > net/ice/base: update boost TCAM for DVM
> > > > > net/ice/base: change protocol ID for VLAN in DVM
> > > > > net/ice/base: refactor post DDP download VLAN mode config
> > > > > net/ice/base: log if DDP/FW do not support QinQ
> > > > > net/ice/base: add inner VLAN protocol type for QinQ filter
> > > > > net/ice/base: fix QinQ PPPoE dummy packet selection
> > > > >
> > > > > Yuying Zhang (1):
> > > > > net/ice/base: add ethertype offset for QinQ dummy packet
> > > > >
> > > > > drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> > > > > drivers/net/ice/base/ice_bitops.h | 45 +++
> > > > > drivers/net/ice/base/ice_common.c | 38 ++
> > > > > drivers/net/ice/base/ice_common.h | 4 +
> > > > > drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> > > > > drivers/net/ice/base/ice_flex_pipe.h | 12 +
> > > > > drivers/net/ice/base/ice_flex_type.h | 39 ++
> > > > > drivers/net/ice/base/ice_protocol_type.h | 1 +
> > > > > drivers/net/ice/base/ice_switch.c | 124 +++++-
> > > > > drivers/net/ice/base/ice_switch.h | 15 +
> > > > > drivers/net/ice/base/ice_type.h | 4 +
> > > > > drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> > > > > drivers/net/ice/base/ice_vlan_mode.h | 16 +
> > > > > drivers/net/ice/base/meson.build | 1 +
> > > > > drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> > > > > drivers/net/ice/ice_ethdev.h | 10 +-
> > > > > drivers/net/ice/ice_generic_flow.c | 8 +
> > > > > drivers/net/ice/ice_generic_flow.h | 1 +
> > > > > drivers/net/ice/ice_switch_filter.c | 114 +++++-
> > > > > 19 files changed, 1545 insertions(+), 363 deletions(-) create
> > > > > mode
> > > > > 100644 drivers/net/ice/base/ice_vlan_mode.c
> > > > > create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
> > > >
>
>
> > > ...
> >
> > Kevin happens to updated the documents on new feature backport 4
> > months ago, thanks for checking them one by one. Luca's only concern
> > is size of the series, driver vendor is on it's own risk to backport a big patch set.
> > The series supports new fw and QinQ, is it easy to split?
>
> Split the patch ?
Since the major concern is the scale of the patch set, is it possible to minimize the patch set with basic new fw support?
A small patch set to support new fw is acceptable anyway.
>
> >
> > Kevin, is this the first case of feature backport? How do you think?
> >
> > >
> > > > https://doc.dpdk.org/guides/contributing/stable.html#what-changes-
> > > > shou
> > > > ld-be-backported
> > > >
> > > > --
> > > > Kind regards,
> > > > Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-20 13:47 ` Xueming(Steven) Li
@ 2021-06-21 1:35 ` Wang, Haiyue
0 siblings, 0 replies; 53+ messages in thread
From: Wang, Haiyue @ 2021-06-21 1:35 UTC (permalink / raw)
To: Xueming(Steven) Li, Luca Boccassi, stable, Kevin Traynor
Cc: NBU-Contact-Thomas Monjalon, christian.ehrhardt, ktraynor, Zhang, Qi Z
> -----Original Message-----
> From: Xueming(Steven) Li <xuemingl@nvidia.com>
> Sent: Sunday, June 20, 2021 21:48
> To: Wang, Haiyue <haiyue.wang@intel.com>; Luca Boccassi <bluca@debian.org>; stable@dpdk.org; Kevin
> Traynor <ktraynor@redhat.com>
> Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com;
> ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
>
>
> > -----Original Message-----
> > From: Wang, Haiyue <haiyue.wang@intel.com>
> > Sent: Friday, June 18, 2021 9:57 AM
> > To: Xueming(Steven) Li <xuemingl@nvidia.com>; Luca Boccassi <bluca@debian.org>; stable@dpdk.org;
> Kevin Traynor
> > <ktraynor@redhat.com>
> > Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com;
> ktraynor@redhat.com; Zhang, Qi Z
> > <qi.z.zhang@intel.com>
> > Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
> >
> > > -----Original Message-----
> > > From: Xueming(Steven) Li <xuemingl@nvidia.com>
> > > Sent: Thursday, June 17, 2021 16:53
> > > To: Wang, Haiyue <haiyue.wang@intel.com>; Luca Boccassi
> > > <bluca@debian.org>; stable@dpdk.org; Kevin Traynor
> > > <ktraynor@redhat.com>
> > > Cc: NBU-Contact-Thomas Monjalon <thomas@monjalon.net>;
> > > christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> > > <qi.z.zhang@intel.com>
> > > Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > > VLAN design for Intel ice PMD
> > >
> > > Hi Haiyue,
> > >
> > > > -----Original Message-----
> > > > From: Wang, Haiyue <haiyue.wang@intel.com>
> > > > Sent: Thursday, June 17, 2021 9:16 AM
> > > > To: Luca Boccassi <bluca@debian.org>; stable@dpdk.org
> > > > Cc: Xueming(Steven) Li <xuemingl@nvidia.com>; NBU-Contact-Thomas
> > > > Monjalon <thomas@monjalon.net>; christian.ehrhardt@canonical.com;
> > > > ktraynor@redhat.com; Zhang, Qi Z <qi.z.zhang@intel.com>
> > > > Subject: RE: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > > > VLAN design for Intel ice PMD
> > > >
> > > > > -----Original Message-----
> > > > > From: Luca Boccassi <bluca@debian.org>
> > > > > Sent: Wednesday, June 16, 2021 23:47
> > > > > To: Wang, Haiyue <haiyue.wang@intel.com>; stable@dpdk.org
> > > > > Cc: xuemingl@nvidia.com; thomas@monjalon.net;
> > > > > christian.ehrhardt@canonical.com; ktraynor@redhat.com; Zhang, Qi Z
> > > > > <qi.z.zhang@intel.com>
> > > > > Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new
> > > > > VLAN design for Intel ice PMD
> > > > >
> > > > > On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> > > > > > When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> > > > > > offload, which can only handle single VLAN mode for firmware
> > > > > > limitation. Now the firmware is updated to support double VLAN
> > > > > > mode and single VLAN mode at the same time. It depends on the driver to do selection at the
> boot time.
> > > > > >
> > > > > > As VLAN protocol handling like strip, filter, flow is very
> > > > > > common use, we request to support the ice PMD can run on the
> > > > > > latest firmware for enabling the new design. This is compatible backport as the main tree.
> > > > > >
> > > > > > v2: Fix the subject fix with messy code like : PATCHÂ
> > > > > >
> > > > > > Haiyue Wang (4):
> > > > > > net/ice/base: do not set VLAN mode in DCF mode
> > > > > > net/ice: fix VLAN strip for double VLAN
> > > > > > net/ice: fix VLAN 0 adding based on VLAN mode
> > > > > > net/ice: update QinQ switch filter handling
> > > > > >
> > > > > > Junfeng Guo (1):
> > > > > > net/ice: enable QinQ filter for switch
> > > > > >
> > > > > > Qi Zhang (12):
> > > > > > net/ice/base: align add VSI and update VSI AQ command buffer
> > > > > > net/ice/base: add interface to support configuring VLAN mode
> > > > > > net/ice/base: fix outer VLAN related macro
> > > > > > net/ice/base: add VLAN TPID for VLAN filters
> > > > > > net/ice/base: support checking double VLAN mode
> > > > > > net/ice/base: support configuring device in double VLAN mode
> > > > > > net/ice/base: update boost TCAM for DVM
> > > > > > net/ice/base: change protocol ID for VLAN in DVM
> > > > > > net/ice/base: refactor post DDP download VLAN mode config
> > > > > > net/ice/base: log if DDP/FW do not support QinQ
> > > > > > net/ice/base: add inner VLAN protocol type for QinQ filter
> > > > > > net/ice/base: fix QinQ PPPoE dummy packet selection
> > > > > >
> > > > > > Yuying Zhang (1):
> > > > > > net/ice/base: add ethertype offset for QinQ dummy packet
> > > > > >
> > > > > > drivers/net/ice/base/ice_adminq_cmd.h | 268 ++++++++-----
> > > > > > drivers/net/ice/base/ice_bitops.h | 45 +++
> > > > > > drivers/net/ice/base/ice_common.c | 38 ++
> > > > > > drivers/net/ice/base/ice_common.h | 4 +
> > > > > > drivers/net/ice/base/ice_flex_pipe.c | 302 +++++++++++++--
> > > > > > drivers/net/ice/base/ice_flex_pipe.h | 12 +
> > > > > > drivers/net/ice/base/ice_flex_type.h | 39 ++
> > > > > > drivers/net/ice/base/ice_protocol_type.h | 1 +
> > > > > > drivers/net/ice/base/ice_switch.c | 124 +++++-
> > > > > > drivers/net/ice/base/ice_switch.h | 15 +
> > > > > > drivers/net/ice/base/ice_type.h | 4 +
> > > > > > drivers/net/ice/base/ice_vlan_mode.c | 451 ++++++++++++++++++++++
> > > > > > drivers/net/ice/base/ice_vlan_mode.h | 16 +
> > > > > > drivers/net/ice/base/meson.build | 1 +
> > > > > > drivers/net/ice/ice_ethdev.c | 455 +++++++++++++----------
> > > > > > drivers/net/ice/ice_ethdev.h | 10 +-
> > > > > > drivers/net/ice/ice_generic_flow.c | 8 +
> > > > > > drivers/net/ice/ice_generic_flow.h | 1 +
> > > > > > drivers/net/ice/ice_switch_filter.c | 114 +++++-
> > > > > > 19 files changed, 1545 insertions(+), 363 deletions(-) create
> > > > > > mode
> > > > > > 100644 drivers/net/ice/base/ice_vlan_mode.c
> > > > > > create mode 100644 drivers/net/ice/base/ice_vlan_mode.h
> > > > >
> >
> >
> > > > ...
> > >
> > > Kevin happens to updated the documents on new feature backport 4
> > > months ago, thanks for checking them one by one. Luca's only concern
> > > is size of the series, driver vendor is on it's own risk to backport a big patch set.
> > > The series supports new fw and QinQ, is it easy to split?
> >
> > Split the patch ?
>
> Since the major concern is the scale of the patch set, is it possible to minimize the patch set with
> basic new fw support?
> A small patch set to support new fw is acceptable anyway.
>
Unfortunately, the hardware is so smart now, the programming is not so
easy, compared with just read/write registers before.;-)
ice driver needs to read the profile to handle the configuration:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/intel/ice/ddp-comms/ice_comms-1.3.20.0.pkg
Also, the AdminQ message is some BIG change to support different VLAN modes.
You can see the core functions (we call it share code, which is some kind of lib for
different platform) is SO BIG enough (not include the PMD VLAN ops itself):
1. [PATCH 20.11 v2 01/18] net/ice/base: align add VSI and update VSI AQ command buffer
2 files changed, 152 insertions(+), 145 deletions(-)
2. [PATCH 20.11 v2 02/18] net/ice/base: add interface to support configuring VLAN mode
8 files changed, 153 insertions(+)
3. [PATCH 20.11 v2 05/18] net/ice/base: support checking double VLAN mode
5 files changed, 221 insertions(+), 2 deletions(-)
4. [PATCH 20.11 v2 06/18] net/ice/base: support configuring device in double VLAN mode
8 files changed, 381 insertions(+), 46 deletions(-)
5. [PATCH 20.11 v2 08/18] net/ice/base: update boost TCAM for DVM
5 files changed, 213 insertions(+), 33 deletions(-)
We spent two more development cycle (21.02 and 21.05) to make the VLAN design stable,
so the change is BIG, and it is hard for customers to cherry-pick so many patches for
themself to sync with the LTS release, since some of the patches will needs to rebased.
That's why we want to request the backport.
Also, ice becomes production at 20.11, it is a fresh/new PMD, some design
needs to be enhanced, like VLAN.
https://git.dpdk.org/dpdk/commit/?id=1eba5194e32783f85895d0aa76eefffbb36f7108
For the worst, this patch set only breaks ice PMD VLAN (of course, we test it well. ;-))
> >
> > >
> > > Kevin, is this the first case of feature backport? How do you think?
> > >
> > > >
> > > > > https://doc.dpdk.org/guides/contributing/stable.html#what-changes-
> > > > > shou
> > > > > ld-be-backported
> > > > >
> > > > > --
> > > > > Kind regards,
> > > > > Luca Boccassi
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-18 3:22 ` Wang, Haiyue
2021-06-18 10:12 ` Kevin Traynor
@ 2021-06-21 8:28 ` Thomas Monjalon
2021-06-21 8:34 ` Wang, Haiyue
2021-06-21 10:28 ` Kevin Traynor
1 sibling, 2 replies; 53+ messages in thread
From: Thomas Monjalon @ 2021-06-21 8:28 UTC (permalink / raw)
To: Kevin Traynor, Xueming(Steven) Li, Luca Boccassi, Wang, Haiyue,
christian.ehrhardt
Cc: stable, Zhang, Qi Z, Fu, Qi, techboard
18/06/2021 05:22, Wang, Haiyue:
> From: Kevin Traynor <ktraynor@redhat.com>
> > On 17/06/2021 09:53, Xueming(Steven) Li wrote:
> > > From: Wang, Haiyue <haiyue.wang@intel.com>
> > >> From: Luca Boccassi <bluca@debian.org>
> > >>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> > >>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> > >>>> offload, which can only handle single VLAN mode for firmware
> > >>>> limitation. Now the firmware is updated to support double VLAN mode
> > >>>> and single VLAN mode at the same time.
> > >>>> It depends on the driver to do selection at the boot time.
> > >>>>
> > >>>> As VLAN protocol handling like strip, filter, flow is very common
> > >>>> use, we request to support the ice PMD can run on the latest
> > >>>> firmware for enabling the new design. This is compatible backport as the main tree.
[...]
> > >>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
[...]
> > >>> At 1.9k diffstat, this series is quite large. Given it's a new
> > >>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
> > >>> Final word of course belongs to Xueming, since he's managing this one.
[...]
> > >> 06. Is it obvious that the feature will not impact existing functionality?
> > >>
> > >> Yes.
> >
> > No. It is 1.9KLOC change. The key part of the question is "obvious". It
> > was meant so the maintainer could use their judgement and review that
> > for example, a few lines of code adding a PCI ID or adding a case in a
> > switch statement, is obviously not going to impact existing functionality.
> > On the other hand, for a more complex code change to existing code, it
> > is not immediately obvious that there would be no risk to existing
> > functionality.
[...]
> > >> 11. Is there a community consensus about the backport?
> > >>
> > >> ...
> > >
> > > Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
> > them
> > > one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to backport
> > a big patch set.
> > > The series supports new fw and QinQ, is it easy to split?
> > >
> > > Kevin, is this the first case of feature backport? How do you think?
> > >
> >
> > Like Luca, main concern would be the size and intrusiveness of the
> > changes, and if it's ok to change 1.9KLOC in this driver now, then why
> > not 20KLOC in next release to multiple drivers. I had pushed against a
>
> TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
> one, current VLAN has a limited usage, customer is hard to use. That's why we
> try to request to backport the new VLAN design.
Yes ice is quite recent.
If a required feature is not working, it should motivate to upgrade.
Because ice is "fresh", I don't understand why sticking to 20.11.
My concern is that backporting this big feature would create a precedent,
so all users will require to stick on the last LTS when getting
all the new reworked features.
I think it would be a bad situation for all of us.
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-21 8:28 ` Thomas Monjalon
@ 2021-06-21 8:34 ` Wang, Haiyue
2021-06-21 8:59 ` Kevin Traynor
2021-06-21 10:28 ` Kevin Traynor
1 sibling, 1 reply; 53+ messages in thread
From: Wang, Haiyue @ 2021-06-21 8:34 UTC (permalink / raw)
To: Thomas Monjalon, Kevin Traynor, Xueming(Steven) Li,
Luca Boccassi, christian.ehrhardt
Cc: stable, Zhang, Qi Z, Fu, Qi, techboard
> -----Original Message-----
> From: Thomas Monjalon <thomas@monjalon.net>
> Sent: Monday, June 21, 2021 16:29
> To: Kevin Traynor <ktraynor@redhat.com>; Xueming(Steven) Li <xuemingl@nvidia.com>; Luca Boccassi
> <bluca@debian.org>; Wang, Haiyue <haiyue.wang@intel.com>; christian.ehrhardt@canonical.com
> Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Fu, Qi <qi.fu@intel.com>; techboard@dpdk.org
> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> 18/06/2021 05:22, Wang, Haiyue:
> > From: Kevin Traynor <ktraynor@redhat.com>
> > > On 17/06/2021 09:53, Xueming(Steven) Li wrote:
> > > > From: Wang, Haiyue <haiyue.wang@intel.com>
> > > >> From: Luca Boccassi <bluca@debian.org>
> > > >>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> > > >>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> > > >>>> offload, which can only handle single VLAN mode for firmware
> > > >>>> limitation. Now the firmware is updated to support double VLAN mode
> > > >>>> and single VLAN mode at the same time.
> > > >>>> It depends on the driver to do selection at the boot time.
> > > >>>>
> > > >>>> As VLAN protocol handling like strip, filter, flow is very common
> > > >>>> use, we request to support the ice PMD can run on the latest
> > > >>>> firmware for enabling the new design. This is compatible backport as the main tree.
> [...]
> > > >>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
> [...]
> > > >>> At 1.9k diffstat, this series is quite large. Given it's a new
> > > >>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
> > > >>> Final word of course belongs to Xueming, since he's managing this one.
>
> [...]
> > > >> 06. Is it obvious that the feature will not impact existing functionality?
> > > >>
> > > >> Yes.
> > >
> > > No. It is 1.9KLOC change. The key part of the question is "obvious". It
> > > was meant so the maintainer could use their judgement and review that
> > > for example, a few lines of code adding a PCI ID or adding a case in a
> > > switch statement, is obviously not going to impact existing functionality.
> > > On the other hand, for a more complex code change to existing code, it
> > > is not immediately obvious that there would be no risk to existing
> > > functionality.
>
> [...]
> > > >> 11. Is there a community consensus about the backport?
> > > >>
> > > >> ...
> > > >
> > > > Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
> > > them
> > > > one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to
> backport
> > > a big patch set.
> > > > The series supports new fw and QinQ, is it easy to split?
> > > >
> > > > Kevin, is this the first case of feature backport? How do you think?
> > > >
> > >
> > > Like Luca, main concern would be the size and intrusiveness of the
> > > changes, and if it's ok to change 1.9KLOC in this driver now, then why
> > > not 20KLOC in next release to multiple drivers. I had pushed against a
> >
> > TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
> > one, current VLAN has a limited usage, customer is hard to use. That's why we
> > try to request to backport the new VLAN design.
>
> Yes ice is quite recent.
> If a required feature is not working, it should motivate to upgrade.
> Because ice is "fresh", I don't understand why sticking to 20.11.
> My concern is that backporting this big feature would create a precedent,
> so all users will require to stick on the last LTS when getting
> all the new reworked features.
"Performance improvements are generally not considered to be fixes, but may be
considered in some cases where:
It is fixing a performance regression that occurred previously.
An existing feature in LTS is not usable as intended without it."
I think "An existing feature in LTS is not usable as intended without it " can
be one reason, since the old design is out of date in two year of LTS lifetime.
> I think it would be a bad situation for all of us.
>
>
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-21 8:34 ` Wang, Haiyue
@ 2021-06-21 8:59 ` Kevin Traynor
0 siblings, 0 replies; 53+ messages in thread
From: Kevin Traynor @ 2021-06-21 8:59 UTC (permalink / raw)
To: Wang, Haiyue, Thomas Monjalon, Xueming(Steven) Li, Luca Boccassi,
christian.ehrhardt
Cc: stable, Zhang, Qi Z, Fu, Qi, techboard
On 21/06/2021 09:34, Wang, Haiyue wrote:
>> -----Original Message-----
>> From: Thomas Monjalon <thomas@monjalon.net>
>> Sent: Monday, June 21, 2021 16:29
>> To: Kevin Traynor <ktraynor@redhat.com>; Xueming(Steven) Li <xuemingl@nvidia.com>; Luca Boccassi
>> <bluca@debian.org>; Wang, Haiyue <haiyue.wang@intel.com>; christian.ehrhardt@canonical.com
>> Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Fu, Qi <qi.fu@intel.com>; techboard@dpdk.org
>> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>>
>> 18/06/2021 05:22, Wang, Haiyue:
>>> From: Kevin Traynor <ktraynor@redhat.com>
>>>> On 17/06/2021 09:53, Xueming(Steven) Li wrote:
>>>>> From: Wang, Haiyue <haiyue.wang@intel.com>
>>>>>> From: Luca Boccassi <bluca@debian.org>
>>>>>>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
>>>>>>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
>>>>>>>> offload, which can only handle single VLAN mode for firmware
>>>>>>>> limitation. Now the firmware is updated to support double VLAN mode
>>>>>>>> and single VLAN mode at the same time.
>>>>>>>> It depends on the driver to do selection at the boot time.
>>>>>>>>
>>>>>>>> As VLAN protocol handling like strip, filter, flow is very common
>>>>>>>> use, we request to support the ice PMD can run on the latest
>>>>>>>> firmware for enabling the new design. This is compatible backport as the main tree.
>> [...]
>>>>>>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
>> [...]
>>>>>>> At 1.9k diffstat, this series is quite large. Given it's a new
>>>>>>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
>>>>>>> Final word of course belongs to Xueming, since he's managing this one.
>>
>> [...]
>>>>>> 06. Is it obvious that the feature will not impact existing functionality?
>>>>>>
>>>>>> Yes.
>>>>
>>>> No. It is 1.9KLOC change. The key part of the question is "obvious". It
>>>> was meant so the maintainer could use their judgement and review that
>>>> for example, a few lines of code adding a PCI ID or adding a case in a
>>>> switch statement, is obviously not going to impact existing functionality.
>>>> On the other hand, for a more complex code change to existing code, it
>>>> is not immediately obvious that there would be no risk to existing
>>>> functionality.
>>
>> [...]
>>>>>> 11. Is there a community consensus about the backport?
>>>>>>
>>>>>> ...
>>>>>
>>>>> Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
>>>> them
>>>>> one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to
>> backport
>>>> a big patch set.
>>>>> The series supports new fw and QinQ, is it easy to split?
>>>>>
>>>>> Kevin, is this the first case of feature backport? How do you think?
>>>>>
>>>>
>>>> Like Luca, main concern would be the size and intrusiveness of the
>>>> changes, and if it's ok to change 1.9KLOC in this driver now, then why
>>>> not 20KLOC in next release to multiple drivers. I had pushed against a
>>>
>>> TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
>>> one, current VLAN has a limited usage, customer is hard to use. That's why we
>>> try to request to backport the new VLAN design.
>>
>> Yes ice is quite recent.
>> If a required feature is not working, it should motivate to upgrade.
>> Because ice is "fresh", I don't understand why sticking to 20.11.
>> My concern is that backporting this big feature would create a precedent,
>> so all users will require to stick on the last LTS when getting
>> all the new reworked features.
>
> "Performance improvements are generally not considered to be fixes, but may be
> considered in some cases where:
>
> It is fixing a performance regression that occurred previously.
> An existing feature in LTS is not usable as intended without it."
>
> I think "An existing feature in LTS is not usable as intended without it " can
> be one reason, since the old design is out of date in two year of LTS lifetime.
>
This section is about performance improvements e.g. optimising some code
to increase throughput. Added because it's not as obvious whether
performance improvements are a fix or new functionality and it was
discussed a few times. I don't believe it is relevant to these patches.
>> I think it would be a bad situation for all of us.
>>
>>
>
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-21 8:28 ` Thomas Monjalon
2021-06-21 8:34 ` Wang, Haiyue
@ 2021-06-21 10:28 ` Kevin Traynor
2021-06-22 1:41 ` Wang, Haiyue
1 sibling, 1 reply; 53+ messages in thread
From: Kevin Traynor @ 2021-06-21 10:28 UTC (permalink / raw)
To: Thomas Monjalon, Xueming(Steven) Li, Luca Boccassi, Wang, Haiyue,
christian.ehrhardt
Cc: stable, Zhang, Qi Z, Fu, Qi, techboard
On 21/06/2021 09:28, Thomas Monjalon wrote:
> 18/06/2021 05:22, Wang, Haiyue:
>> From: Kevin Traynor <ktraynor@redhat.com>
>>> On 17/06/2021 09:53, Xueming(Steven) Li wrote:
>>>> From: Wang, Haiyue <haiyue.wang@intel.com>
>>>>> From: Luca Boccassi <bluca@debian.org>
>>>>>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
>>>>>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
>>>>>>> offload, which can only handle single VLAN mode for firmware
>>>>>>> limitation. Now the firmware is updated to support double VLAN mode
>>>>>>> and single VLAN mode at the same time.
>>>>>>> It depends on the driver to do selection at the boot time.
>>>>>>>
>>>>>>> As VLAN protocol handling like strip, filter, flow is very common
>>>>>>> use, we request to support the ice PMD can run on the latest
>>>>>>> firmware for enabling the new design. This is compatible backport as the main tree.
> [...]
>>>>>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
> [...]
>>>>>> At 1.9k diffstat, this series is quite large. Given it's a new
>>>>>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
>>>>>> Final word of course belongs to Xueming, since he's managing this one.
>
> [...]
>>>>> 06. Is it obvious that the feature will not impact existing functionality?
>>>>>
>>>>> Yes.
>>>
>>> No. It is 1.9KLOC change. The key part of the question is "obvious". It
>>> was meant so the maintainer could use their judgement and review that
>>> for example, a few lines of code adding a PCI ID or adding a case in a
>>> switch statement, is obviously not going to impact existing functionality.
>>> On the other hand, for a more complex code change to existing code, it
>>> is not immediately obvious that there would be no risk to existing
>>> functionality.
>
> [...]
>>>>> 11. Is there a community consensus about the backport?
>>>>>
>>>>> ...
>>>>
>>>> Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
>>> them
>>>> one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to backport
>>> a big patch set.
>>>> The series supports new fw and QinQ, is it easy to split?
>>>>
>>>> Kevin, is this the first case of feature backport? How do you think?
>>>>
>>>
>>> Like Luca, main concern would be the size and intrusiveness of the
>>> changes, and if it's ok to change 1.9KLOC in this driver now, then why
>>> not 20KLOC in next release to multiple drivers. I had pushed against a
>>
>> TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
>> one, current VLAN has a limited usage, customer is hard to use. That's why we
>> try to request to backport the new VLAN design.
>
> Yes ice is quite recent.
> If a required feature is not working, it should motivate to upgrade.
> Because ice is "fresh", I don't understand why sticking to 20.11.
> My concern is that backporting this big feature would create a precedent,
> so all users will require to stick on the last LTS when getting
> all the new reworked features.
> I think it would be a bad situation for all of us.
>
>
>
Why can't the users use ABI compatible 21.02/21.05? Why do they want to
stay on 20.11? The only reason I can see for staying on 20.11 is because
it is a stable (bug fix only) release.
So you want an LTS that is bug fix only except for ice with new features.
A type of LTS-main hybrid for selected drivers seems like something more
suited for individual vendors and not replacing the community LTS with IMHO.
But if it were to replace the current community LTS, or become the
normal, then it should be consciously decided. I feel doing it by adding
one big feature at a time to the current LTS is not the right approach.
^ permalink raw reply [flat|nested] 53+ messages in thread
* Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
2021-06-21 10:28 ` Kevin Traynor
@ 2021-06-22 1:41 ` Wang, Haiyue
0 siblings, 0 replies; 53+ messages in thread
From: Wang, Haiyue @ 2021-06-22 1:41 UTC (permalink / raw)
To: Kevin Traynor, Thomas Monjalon, Xueming(Steven) Li,
Luca Boccassi, christian.ehrhardt
Cc: stable, Zhang, Qi Z, Fu, Qi, techboard
> -----Original Message-----
> From: Kevin Traynor <ktraynor@redhat.com>
> Sent: Monday, June 21, 2021 18:28
> To: Thomas Monjalon <thomas@monjalon.net>; Xueming(Steven) Li <xuemingl@nvidia.com>; Luca Boccassi
> <bluca@debian.org>; Wang, Haiyue <haiyue.wang@intel.com>; christian.ehrhardt@canonical.com
> Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Fu, Qi <qi.fu@intel.com>; techboard@dpdk.org
> Subject: Re: [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD
>
> On 21/06/2021 09:28, Thomas Monjalon wrote:
> > 18/06/2021 05:22, Wang, Haiyue:
> >> From: Kevin Traynor <ktraynor@redhat.com>
> >>> On 17/06/2021 09:53, Xueming(Steven) Li wrote:
> >>>> From: Wang, Haiyue <haiyue.wang@intel.com>
> >>>>> From: Luca Boccassi <bluca@debian.org>
> >>>>>> On Fri, 2021-06-11 at 15:15 +0800, Haiyue Wang wrote:
> >>>>>>> When LTS 20.11 was released, the Intel ice PMD has a basic VLAN
> >>>>>>> offload, which can only handle single VLAN mode for firmware
> >>>>>>> limitation. Now the firmware is updated to support double VLAN mode
> >>>>>>> and single VLAN mode at the same time.
> >>>>>>> It depends on the driver to do selection at the boot time.
> >>>>>>>
> >>>>>>> As VLAN protocol handling like strip, filter, flow is very common
> >>>>>>> use, we request to support the ice PMD can run on the latest
> >>>>>>> firmware for enabling the new design. This is compatible backport as the main tree.
> > [...]
> >>>>>>> 19 files changed, 1545 insertions(+), 363 deletions(-) create mode
> > [...]
> >>>>>> At 1.9k diffstat, this series is quite large. Given it's a new
> >>>>>> feature, rather than a series of bug fixes, this would seem a bit risky to me.
> >>>>>> Final word of course belongs to Xueming, since he's managing this one.
> >
> > [...]
> >>>>> 06. Is it obvious that the feature will not impact existing functionality?
> >>>>>
> >>>>> Yes.
> >>>
> >>> No. It is 1.9KLOC change. The key part of the question is "obvious". It
> >>> was meant so the maintainer could use their judgement and review that
> >>> for example, a few lines of code adding a PCI ID or adding a case in a
> >>> switch statement, is obviously not going to impact existing functionality.
> >>> On the other hand, for a more complex code change to existing code, it
> >>> is not immediately obvious that there would be no risk to existing
> >>> functionality.
> >
> > [...]
> >>>>> 11. Is there a community consensus about the backport?
> >>>>>
> >>>>> ...
> >>>>
> >>>> Kevin happens to updated the documents on new feature backport 4 months ago, thanks for checking
> >>> them
> >>>> one by one. Luca's only concern is size of the series, driver vendor is on it's own risk to
> backport
> >>> a big patch set.
> >>>> The series supports new fw and QinQ, is it easy to split?
> >>>>
> >>>> Kevin, is this the first case of feature backport? How do you think?
> >>>>
> >>>
> >>> Like Luca, main concern would be the size and intrusiveness of the
> >>> changes, and if it's ok to change 1.9KLOC in this driver now, then why
> >>> not 20KLOC in next release to multiple drivers. I had pushed against a
> >>
> >> TBH, we won't want to change the stable i40e, ixgbe PMDs, but ice is a fresh
> >> one, current VLAN has a limited usage, customer is hard to use. That's why we
> >> try to request to backport the new VLAN design.
> >
> > Yes ice is quite recent.
> > If a required feature is not working, it should motivate to upgrade.
> > Because ice is "fresh", I don't understand why sticking to 20.11.
> > My concern is that backporting this big feature would create a precedent,
> > so all users will require to stick on the last LTS when getting
> > all the new reworked features.
> > I think it would be a bad situation for all of us.
> >
> >
> >
>
> Why can't the users use ABI compatible 21.02/21.05? Why do they want to
> stay on 20.11? The only reason I can see for staying on 20.11 is because
> it is a stable (bug fix only) release.
Yes, they love LTS.
>
> So you want an LTS that is bug fix only except for ice with new features.
>
> A type of LTS-main hybrid for selected drivers seems like something more
> suited for individual vendors and not replacing the community LTS with IMHO.
>
> But if it were to replace the current community LTS, or become the
> normal, then it should be consciously decided. I feel doing it by adding
> one big feature at a time to the current LTS is not the right approach.
In my eyes, it not a BIG feature, just very simple VLAN design changed. The
BIG you mentioned is LOC. ;-)
We are OK if you don't like code change so much.
^ permalink raw reply [flat|nested] 53+ messages in thread
end of thread, other threads:[~2021-06-22 1:47 UTC | newest]
Thread overview: 53+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-11 6:58 [PATCH 20.11 v1 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 02/18] net/ice/base: add interface to support configuring VLAN mode Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 03/18] net/ice/base: fix outer VLAN related macro Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 04/18] net/ice/base: add VLAN TPID for VLAN filters Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 05/18] net/ice/base: support checking double VLAN mode Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 06/18] net/ice/base: support configuring device in " Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 07/18] net/ice/base: do not set VLAN mode in DCF mode Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 08/18] net/ice/base: update boost TCAM for DVM Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 09/18] net/ice/base: change protocol ID for VLAN in DVM Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 10/18] net/ice/base: refactor post DDP download VLAN mode config Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 11/18] net/ice/base: log if DDP/FW do not support QinQ Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 12/18] net/ice/base: add ethertype offset for QinQ dummy packet Haiyue Wang
2021-06-11 6:58 ` [PATCH 20.11 v1 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 15/18] net/ice: fix VLAN strip for double VLAN Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 16/18] net/ice: fix VLAN 0 adding based on VLAN mode Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 17/18] net/ice: enable QinQ filter for switch Haiyue Wang
2021-06-11 6:58 ` [dpdk-stable] [PATCH 20.11 v1 18/18] net/ice: update QinQ switch filter handling Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 01/18] net/ice/base: align add VSI and update VSI AQ command buffer Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 02/18] net/ice/base: add interface to support configuring VLAN mode Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 03/18] net/ice/base: fix outer VLAN related macro Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 04/18] net/ice/base: add VLAN TPID for VLAN filters Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 05/18] net/ice/base: support checking double VLAN mode Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 06/18] net/ice/base: support configuring device in " Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 07/18] net/ice/base: do not set VLAN mode in DCF mode Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 08/18] net/ice/base: update boost TCAM for DVM Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 09/18] net/ice/base: change protocol ID for VLAN in DVM Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 10/18] net/ice/base: refactor post DDP download VLAN mode config Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 11/18] net/ice/base: log if DDP/FW do not support QinQ Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 12/18] net/ice/base: add ethertype offset for QinQ dummy packet Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 13/18] net/ice/base: add inner VLAN protocol type for QinQ filter Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 14/18] net/ice/base: fix QinQ PPPoE dummy packet selection Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 15/18] net/ice: fix VLAN strip for double VLAN Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 16/18] net/ice: fix VLAN 0 adding based on VLAN mode Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 17/18] net/ice: enable QinQ filter for switch Haiyue Wang
2021-06-11 7:15 ` [dpdk-stable] [PATCH 20.11 v2 18/18] net/ice: update QinQ switch filter handling Haiyue Wang
2021-06-16 15:47 ` [dpdk-stable] [PATCH 20.11 v2 00/18] Backport the new VLAN design for Intel ice PMD Luca Boccassi
2021-06-17 1:16 ` Wang, Haiyue
2021-06-17 8:53 ` Xueming(Steven) Li
2021-06-17 10:04 ` Kevin Traynor
2021-06-18 3:22 ` Wang, Haiyue
2021-06-18 10:12 ` Kevin Traynor
2021-06-18 11:46 ` Wang, Haiyue
2021-06-21 8:28 ` Thomas Monjalon
2021-06-21 8:34 ` Wang, Haiyue
2021-06-21 8:59 ` Kevin Traynor
2021-06-21 10:28 ` Kevin Traynor
2021-06-22 1:41 ` Wang, Haiyue
2021-06-18 1:56 ` Wang, Haiyue
2021-06-20 13:47 ` Xueming(Steven) Li
2021-06-21 1:35 ` Wang, Haiyue
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).